forked from Minki/linux
d2d2c37314
This is a new PHY supporting SFP+ modules, used in the SFN4112F reference design. It is similar to the QT2022C2 and shares much of its support code. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
251 lines
6.3 KiB
C
251 lines
6.3 KiB
C
/****************************************************************************
|
|
* Driver for Solarflare Solarstorm network controllers and boards
|
|
* Copyright 2006-2008 Solarflare Communications Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation, incorporated herein by reference.
|
|
*/
|
|
/*
|
|
* Driver for SFP+ and XFP optical PHYs plus some support specific to the
|
|
* AMCC QT20xx adapters; see www.amcc.com for details
|
|
*/
|
|
|
|
#include <linux/timer.h>
|
|
#include <linux/delay.h>
|
|
#include "efx.h"
|
|
#include "mdio_10g.h"
|
|
#include "xenpack.h"
|
|
#include "phy.h"
|
|
#include "falcon.h"
|
|
|
|
#define XFP_REQUIRED_DEVS (MDIO_MMDREG_DEVS_PCS | \
|
|
MDIO_MMDREG_DEVS_PMAPMD | \
|
|
MDIO_MMDREG_DEVS_PHYXS)
|
|
|
|
#define XFP_LOOPBACKS ((1 << LOOPBACK_PCS) | \
|
|
(1 << LOOPBACK_PMAPMD) | \
|
|
(1 << LOOPBACK_NETWORK))
|
|
|
|
/****************************************************************************/
|
|
/* Quake-specific MDIO registers */
|
|
#define MDIO_QUAKE_LED0_REG (0xD006)
|
|
|
|
/* QT2025C only */
|
|
#define PCS_FW_HEARTBEAT_REG 0xd7ee
|
|
#define PCS_FW_HEARTB_LBN 0
|
|
#define PCS_FW_HEARTB_WIDTH 8
|
|
#define PCS_UC8051_STATUS_REG 0xd7fd
|
|
#define PCS_UC_STATUS_LBN 0
|
|
#define PCS_UC_STATUS_WIDTH 8
|
|
#define PCS_UC_STATUS_FW_SAVE 0x20
|
|
#define PMA_PMD_FTX_CTRL2_REG 0xc309
|
|
#define PMA_PMD_FTX_STATIC_LBN 13
|
|
#define PMA_PMD_VEND1_REG 0xc001
|
|
#define PMA_PMD_VEND1_LBTXD_LBN 15
|
|
#define PCS_VEND1_REG 0xc000
|
|
#define PCS_VEND1_LBTXD_LBN 5
|
|
|
|
void xfp_set_led(struct efx_nic *p, int led, int mode)
|
|
{
|
|
int addr = MDIO_QUAKE_LED0_REG + led;
|
|
mdio_clause45_write(p, p->mii.phy_id, MDIO_MMD_PMAPMD, addr,
|
|
mode);
|
|
}
|
|
|
|
struct xfp_phy_data {
|
|
enum efx_phy_mode phy_mode;
|
|
};
|
|
|
|
#define XFP_MAX_RESET_TIME 500
|
|
#define XFP_RESET_WAIT 10
|
|
|
|
static int qt2025c_wait_reset(struct efx_nic *efx)
|
|
{
|
|
unsigned long timeout = jiffies + 10 * HZ;
|
|
int phy_id = efx->mii.phy_id;
|
|
int reg, old_counter = 0;
|
|
|
|
/* Wait for firmware heartbeat to start */
|
|
for (;;) {
|
|
int counter;
|
|
reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PCS,
|
|
PCS_FW_HEARTBEAT_REG);
|
|
if (reg < 0)
|
|
return reg;
|
|
counter = ((reg >> PCS_FW_HEARTB_LBN) &
|
|
((1 << PCS_FW_HEARTB_WIDTH) - 1));
|
|
if (old_counter == 0)
|
|
old_counter = counter;
|
|
else if (counter != old_counter)
|
|
break;
|
|
if (time_after(jiffies, timeout))
|
|
return -ETIMEDOUT;
|
|
msleep(10);
|
|
}
|
|
|
|
/* Wait for firmware status to look good */
|
|
for (;;) {
|
|
reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PCS,
|
|
PCS_UC8051_STATUS_REG);
|
|
if (reg < 0)
|
|
return reg;
|
|
if ((reg &
|
|
((1 << PCS_UC_STATUS_WIDTH) - 1) << PCS_UC_STATUS_LBN) >=
|
|
PCS_UC_STATUS_FW_SAVE)
|
|
break;
|
|
if (time_after(jiffies, timeout))
|
|
return -ETIMEDOUT;
|
|
msleep(100);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Reset the PHYXS MMD. This is documented (for the Quake PHYs) as doing
|
|
* a complete soft reset.
|
|
*/
|
|
static int xfp_reset_phy(struct efx_nic *efx)
|
|
{
|
|
int rc;
|
|
|
|
rc = mdio_clause45_reset_mmd(efx, MDIO_MMD_PHYXS,
|
|
XFP_MAX_RESET_TIME / XFP_RESET_WAIT,
|
|
XFP_RESET_WAIT);
|
|
if (rc < 0)
|
|
goto fail;
|
|
|
|
if (efx->phy_type == PHY_TYPE_QT2025C) {
|
|
rc = qt2025c_wait_reset(efx);
|
|
if (rc < 0)
|
|
goto fail;
|
|
}
|
|
|
|
/* Wait 250ms for the PHY to complete bootup */
|
|
msleep(250);
|
|
|
|
/* Check that all the MMDs we expect are present and responding. We
|
|
* expect faults on some if the link is down, but not on the PHY XS */
|
|
rc = mdio_clause45_check_mmds(efx, XFP_REQUIRED_DEVS,
|
|
MDIO_MMDREG_DEVS_PHYXS);
|
|
if (rc < 0)
|
|
goto fail;
|
|
|
|
efx->board_info.init_leds(efx);
|
|
|
|
return rc;
|
|
|
|
fail:
|
|
EFX_ERR(efx, "PHY reset timed out\n");
|
|
return rc;
|
|
}
|
|
|
|
static int xfp_phy_init(struct efx_nic *efx)
|
|
{
|
|
struct xfp_phy_data *phy_data;
|
|
u32 devid = mdio_clause45_read_id(efx, MDIO_MMD_PHYXS);
|
|
int rc;
|
|
|
|
phy_data = kzalloc(sizeof(struct xfp_phy_data), GFP_KERNEL);
|
|
if (!phy_data)
|
|
return -ENOMEM;
|
|
efx->phy_data = phy_data;
|
|
|
|
EFX_INFO(efx, "PHY ID reg %x (OUI %06x model %02x revision %x)\n",
|
|
devid, mdio_id_oui(devid), mdio_id_model(devid),
|
|
mdio_id_rev(devid));
|
|
|
|
phy_data->phy_mode = efx->phy_mode;
|
|
|
|
rc = xfp_reset_phy(efx);
|
|
|
|
EFX_INFO(efx, "PHY init %s.\n",
|
|
rc ? "failed" : "successful");
|
|
if (rc < 0)
|
|
goto fail;
|
|
|
|
return 0;
|
|
|
|
fail:
|
|
kfree(efx->phy_data);
|
|
efx->phy_data = NULL;
|
|
return rc;
|
|
}
|
|
|
|
static void xfp_phy_clear_interrupt(struct efx_nic *efx)
|
|
{
|
|
xenpack_clear_lasi_irqs(efx);
|
|
}
|
|
|
|
static int xfp_link_ok(struct efx_nic *efx)
|
|
{
|
|
return mdio_clause45_links_ok(efx, XFP_REQUIRED_DEVS);
|
|
}
|
|
|
|
static void xfp_phy_poll(struct efx_nic *efx)
|
|
{
|
|
int link_up = xfp_link_ok(efx);
|
|
/* Simulate a PHY event if link state has changed */
|
|
if (link_up != efx->link_up)
|
|
falcon_sim_phy_event(efx);
|
|
}
|
|
|
|
static void xfp_phy_reconfigure(struct efx_nic *efx)
|
|
{
|
|
struct xfp_phy_data *phy_data = efx->phy_data;
|
|
|
|
if (efx->phy_type == PHY_TYPE_QT2025C) {
|
|
/* There are several different register bits which can
|
|
* disable TX (and save power) on direct-attach cables
|
|
* or optical transceivers, varying somewhat between
|
|
* firmware versions. Only 'static mode' appears to
|
|
* cover everything. */
|
|
mdio_clause45_set_flag(
|
|
efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
|
|
PMA_PMD_FTX_CTRL2_REG, PMA_PMD_FTX_STATIC_LBN,
|
|
efx->phy_mode & PHY_MODE_TX_DISABLED ||
|
|
efx->phy_mode & PHY_MODE_LOW_POWER ||
|
|
efx->loopback_mode == LOOPBACK_PCS ||
|
|
efx->loopback_mode == LOOPBACK_PMAPMD);
|
|
} else {
|
|
/* Reset the PHY when moving from tx off to tx on */
|
|
if (!(efx->phy_mode & PHY_MODE_TX_DISABLED) &&
|
|
(phy_data->phy_mode & PHY_MODE_TX_DISABLED))
|
|
xfp_reset_phy(efx);
|
|
|
|
mdio_clause45_transmit_disable(efx);
|
|
}
|
|
|
|
mdio_clause45_phy_reconfigure(efx);
|
|
|
|
phy_data->phy_mode = efx->phy_mode;
|
|
efx->link_up = xfp_link_ok(efx);
|
|
efx->link_speed = 10000;
|
|
efx->link_fd = true;
|
|
efx->link_fc = efx->wanted_fc;
|
|
}
|
|
|
|
|
|
static void xfp_phy_fini(struct efx_nic *efx)
|
|
{
|
|
/* Clobber the LED if it was blinking */
|
|
efx->board_info.blink(efx, false);
|
|
|
|
/* Free the context block */
|
|
kfree(efx->phy_data);
|
|
efx->phy_data = NULL;
|
|
}
|
|
|
|
struct efx_phy_operations falcon_xfp_phy_ops = {
|
|
.macs = EFX_XMAC,
|
|
.init = xfp_phy_init,
|
|
.reconfigure = xfp_phy_reconfigure,
|
|
.poll = xfp_phy_poll,
|
|
.fini = xfp_phy_fini,
|
|
.clear_interrupt = xfp_phy_clear_interrupt,
|
|
.get_settings = mdio_clause45_get_settings,
|
|
.set_settings = mdio_clause45_set_settings,
|
|
.mmds = XFP_REQUIRED_DEVS,
|
|
.loopbacks = XFP_LOOPBACKS,
|
|
};
|