forked from Minki/linux
b2ba34f370
In the device tree for Ebony, the 'ranges' property in the node for the EBC bridge shows the mappings from the chip select / address lines actually used for the EBC peripherals into the address space of the OPB. At present, these mappings are hardcoded in ebony.dts for the mappings set up by the OpenBIOS firmware when it configures the EBC bridge. This replaces the hardcoded mappings with code in the zImage to read the EBC configuration registers and create an appropriate ranges property based on them. This should make the zImage and kernel more robust to changes in firmware configuration. In particular, some of the Ebony's DIP switches can change the effective address of the Flash and other peripherals in OPB space. With this patch, the kernel will be able to cope with at least some of the possible variations. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
115 lines
2.9 KiB
C
115 lines
2.9 KiB
C
/*
|
|
* Copyright 2007 David Gibson, IBM Corporation.
|
|
*
|
|
* Based on earlier code:
|
|
* Copyright (C) Paul Mackerras 1997.
|
|
*
|
|
* Matt Porter <mporter@kernel.crashing.org>
|
|
* Copyright 2002-2005 MontaVista Software Inc.
|
|
*
|
|
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
|
|
* Copyright (c) 2003, 2004 Zultys Technologies
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*/
|
|
#include <stdarg.h>
|
|
#include <stddef.h>
|
|
#include "types.h"
|
|
#include "elf.h"
|
|
#include "string.h"
|
|
#include "stdio.h"
|
|
#include "page.h"
|
|
#include "ops.h"
|
|
#include "reg.h"
|
|
#include "dcr.h"
|
|
#include "44x.h"
|
|
|
|
extern char _dtb_start[];
|
|
extern char _dtb_end[];
|
|
|
|
static u8 *ebony_mac0, *ebony_mac1;
|
|
|
|
/* Calculate 440GP clocks */
|
|
void ibm440gp_fixup_clocks(unsigned int sysclk, unsigned int ser_clk)
|
|
{
|
|
u32 sys0 = mfdcr(DCRN_CPC0_SYS0);
|
|
u32 cr0 = mfdcr(DCRN_CPC0_CR0);
|
|
u32 cpu, plb, opb, ebc, tb, uart0, uart1, m;
|
|
u32 opdv = CPC0_SYS0_OPDV(sys0);
|
|
u32 epdv = CPC0_SYS0_EPDV(sys0);
|
|
|
|
if (sys0 & CPC0_SYS0_BYPASS) {
|
|
/* Bypass system PLL */
|
|
cpu = plb = sysclk;
|
|
} else {
|
|
if (sys0 & CPC0_SYS0_EXTSL)
|
|
/* PerClk */
|
|
m = CPC0_SYS0_FWDVB(sys0) * opdv * epdv;
|
|
else
|
|
/* CPU clock */
|
|
m = CPC0_SYS0_FBDV(sys0) * CPC0_SYS0_FWDVA(sys0);
|
|
cpu = sysclk * m / CPC0_SYS0_FWDVA(sys0);
|
|
plb = sysclk * m / CPC0_SYS0_FWDVB(sys0);
|
|
}
|
|
|
|
opb = plb / opdv;
|
|
ebc = opb / epdv;
|
|
|
|
/* FIXME: Check if this is for all 440GP, or just Ebony */
|
|
if ((mfpvr() & 0xf0000fff) == 0x40000440)
|
|
/* Rev. B 440GP, use external system clock */
|
|
tb = sysclk;
|
|
else
|
|
/* Rev. C 440GP, errata force us to use internal clock */
|
|
tb = cpu;
|
|
|
|
if (cr0 & CPC0_CR0_U0EC)
|
|
/* External UART clock */
|
|
uart0 = ser_clk;
|
|
else
|
|
/* Internal UART clock */
|
|
uart0 = plb / CPC0_CR0_UDIV(cr0);
|
|
|
|
if (cr0 & CPC0_CR0_U1EC)
|
|
/* External UART clock */
|
|
uart1 = ser_clk;
|
|
else
|
|
/* Internal UART clock */
|
|
uart1 = plb / CPC0_CR0_UDIV(cr0);
|
|
|
|
printf("PPC440GP: SysClk = %dMHz (%x)\n\r",
|
|
(sysclk + 500000) / 1000000, sysclk);
|
|
|
|
dt_fixup_cpu_clocks(cpu, tb, 0);
|
|
|
|
dt_fixup_clock("/plb", plb);
|
|
dt_fixup_clock("/plb/opb", opb);
|
|
dt_fixup_clock("/plb/opb/ebc", ebc);
|
|
dt_fixup_clock("/plb/opb/serial@40000200", uart0);
|
|
dt_fixup_clock("/plb/opb/serial@40000300", uart1);
|
|
}
|
|
|
|
static void ebony_fixups(void)
|
|
{
|
|
// FIXME: sysclk should be derived by reading the FPGA registers
|
|
unsigned long sysclk = 33000000;
|
|
|
|
ibm440gp_fixup_clocks(sysclk, 6 * 1843200);
|
|
ibm44x_fixup_memsize();
|
|
dt_fixup_mac_addresses(ebony_mac0, ebony_mac1);
|
|
ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
|
|
}
|
|
|
|
void ebony_init(void *mac0, void *mac1)
|
|
{
|
|
platform_ops.fixups = ebony_fixups;
|
|
platform_ops.exit = ibm44x_dbcr_reset;
|
|
ebony_mac0 = mac0;
|
|
ebony_mac1 = mac1;
|
|
ft_init(_dtb_start, _dtb_end - _dtb_start, 32);
|
|
serial_console_init();
|
|
}
|