forked from Minki/linux
6b6c32fc96
Modify interrupt handling such that interrupts can be handled by GPMC client drivers using standard interrupt APIs rather than requiring the drivers to have knowledge about GPMC interrupt handling. Currently only NAND related interrupts has been considered (which is the case even without this change) as the only user of GPMC interrupt is NAND. Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
1245 lines
31 KiB
C
1245 lines
31 KiB
C
/*
|
|
* GPMC support functions
|
|
*
|
|
* Copyright (C) 2005-2006 Nokia Corporation
|
|
*
|
|
* Author: Juha Yrjola
|
|
*
|
|
* Copyright (C) 2009 Texas Instruments
|
|
* Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#undef DEBUG
|
|
|
|
#include <linux/irq.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/err.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <plat/gpmc.h>
|
|
|
|
#include <plat/sdrc.h>
|
|
|
|
/* GPMC register offsets */
|
|
#define GPMC_REVISION 0x00
|
|
#define GPMC_SYSCONFIG 0x10
|
|
#define GPMC_SYSSTATUS 0x14
|
|
#define GPMC_IRQSTATUS 0x18
|
|
#define GPMC_IRQENABLE 0x1c
|
|
#define GPMC_TIMEOUT_CONTROL 0x40
|
|
#define GPMC_ERR_ADDRESS 0x44
|
|
#define GPMC_ERR_TYPE 0x48
|
|
#define GPMC_CONFIG 0x50
|
|
#define GPMC_STATUS 0x54
|
|
#define GPMC_PREFETCH_CONFIG1 0x1e0
|
|
#define GPMC_PREFETCH_CONFIG2 0x1e4
|
|
#define GPMC_PREFETCH_CONTROL 0x1ec
|
|
#define GPMC_PREFETCH_STATUS 0x1f0
|
|
#define GPMC_ECC_CONFIG 0x1f4
|
|
#define GPMC_ECC_CONTROL 0x1f8
|
|
#define GPMC_ECC_SIZE_CONFIG 0x1fc
|
|
#define GPMC_ECC1_RESULT 0x200
|
|
#define GPMC_ECC_BCH_RESULT_0 0x240 /* not available on OMAP2 */
|
|
|
|
/* GPMC ECC control settings */
|
|
#define GPMC_ECC_CTRL_ECCCLEAR 0x100
|
|
#define GPMC_ECC_CTRL_ECCDISABLE 0x000
|
|
#define GPMC_ECC_CTRL_ECCREG1 0x001
|
|
#define GPMC_ECC_CTRL_ECCREG2 0x002
|
|
#define GPMC_ECC_CTRL_ECCREG3 0x003
|
|
#define GPMC_ECC_CTRL_ECCREG4 0x004
|
|
#define GPMC_ECC_CTRL_ECCREG5 0x005
|
|
#define GPMC_ECC_CTRL_ECCREG6 0x006
|
|
#define GPMC_ECC_CTRL_ECCREG7 0x007
|
|
#define GPMC_ECC_CTRL_ECCREG8 0x008
|
|
#define GPMC_ECC_CTRL_ECCREG9 0x009
|
|
|
|
#define GPMC_CS0_OFFSET 0x60
|
|
#define GPMC_CS_SIZE 0x30
|
|
|
|
#define GPMC_MEM_START 0x00000000
|
|
#define GPMC_MEM_END 0x3FFFFFFF
|
|
#define BOOT_ROM_SPACE 0x100000 /* 1MB */
|
|
|
|
#define GPMC_CHUNK_SHIFT 24 /* 16 MB */
|
|
#define GPMC_SECTION_SHIFT 28 /* 128 MB */
|
|
|
|
#define CS_NUM_SHIFT 24
|
|
#define ENABLE_PREFETCH (0x1 << 7)
|
|
#define DMA_MPU_MODE 2
|
|
|
|
/* XXX: Only NAND irq has been considered,currently these are the only ones used
|
|
*/
|
|
#define GPMC_NR_IRQ 2
|
|
|
|
struct gpmc_client_irq {
|
|
unsigned irq;
|
|
u32 bitmask;
|
|
};
|
|
|
|
/* Structure to save gpmc cs context */
|
|
struct gpmc_cs_config {
|
|
u32 config1;
|
|
u32 config2;
|
|
u32 config3;
|
|
u32 config4;
|
|
u32 config5;
|
|
u32 config6;
|
|
u32 config7;
|
|
int is_valid;
|
|
};
|
|
|
|
/*
|
|
* Structure to save/restore gpmc context
|
|
* to support core off on OMAP3
|
|
*/
|
|
struct omap3_gpmc_regs {
|
|
u32 sysconfig;
|
|
u32 irqenable;
|
|
u32 timeout_ctrl;
|
|
u32 config;
|
|
u32 prefetch_config1;
|
|
u32 prefetch_config2;
|
|
u32 prefetch_control;
|
|
struct gpmc_cs_config cs_context[GPMC_CS_NUM];
|
|
};
|
|
|
|
static struct gpmc_client_irq gpmc_client_irq[GPMC_NR_IRQ];
|
|
static struct irq_chip gpmc_irq_chip;
|
|
static unsigned gpmc_irq_start;
|
|
|
|
static struct resource gpmc_mem_root;
|
|
static struct resource gpmc_cs_mem[GPMC_CS_NUM];
|
|
static DEFINE_SPINLOCK(gpmc_mem_lock);
|
|
static unsigned int gpmc_cs_map; /* flag for cs which are initialized */
|
|
static int gpmc_ecc_used = -EINVAL; /* cs using ecc engine */
|
|
|
|
static void __iomem *gpmc_base;
|
|
|
|
static struct clk *gpmc_l3_clk;
|
|
|
|
static irqreturn_t gpmc_handle_irq(int irq, void *dev);
|
|
|
|
static void gpmc_write_reg(int idx, u32 val)
|
|
{
|
|
__raw_writel(val, gpmc_base + idx);
|
|
}
|
|
|
|
static u32 gpmc_read_reg(int idx)
|
|
{
|
|
return __raw_readl(gpmc_base + idx);
|
|
}
|
|
|
|
static void gpmc_cs_write_byte(int cs, int idx, u8 val)
|
|
{
|
|
void __iomem *reg_addr;
|
|
|
|
reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
|
|
__raw_writeb(val, reg_addr);
|
|
}
|
|
|
|
static u8 gpmc_cs_read_byte(int cs, int idx)
|
|
{
|
|
void __iomem *reg_addr;
|
|
|
|
reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
|
|
return __raw_readb(reg_addr);
|
|
}
|
|
|
|
void gpmc_cs_write_reg(int cs, int idx, u32 val)
|
|
{
|
|
void __iomem *reg_addr;
|
|
|
|
reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
|
|
__raw_writel(val, reg_addr);
|
|
}
|
|
|
|
u32 gpmc_cs_read_reg(int cs, int idx)
|
|
{
|
|
void __iomem *reg_addr;
|
|
|
|
reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
|
|
return __raw_readl(reg_addr);
|
|
}
|
|
|
|
/* TODO: Add support for gpmc_fck to clock framework and use it */
|
|
unsigned long gpmc_get_fclk_period(void)
|
|
{
|
|
unsigned long rate = clk_get_rate(gpmc_l3_clk);
|
|
|
|
if (rate == 0) {
|
|
printk(KERN_WARNING "gpmc_l3_clk not enabled\n");
|
|
return 0;
|
|
}
|
|
|
|
rate /= 1000;
|
|
rate = 1000000000 / rate; /* In picoseconds */
|
|
|
|
return rate;
|
|
}
|
|
|
|
unsigned int gpmc_ns_to_ticks(unsigned int time_ns)
|
|
{
|
|
unsigned long tick_ps;
|
|
|
|
/* Calculate in picosecs to yield more exact results */
|
|
tick_ps = gpmc_get_fclk_period();
|
|
|
|
return (time_ns * 1000 + tick_ps - 1) / tick_ps;
|
|
}
|
|
|
|
unsigned int gpmc_ps_to_ticks(unsigned int time_ps)
|
|
{
|
|
unsigned long tick_ps;
|
|
|
|
/* Calculate in picosecs to yield more exact results */
|
|
tick_ps = gpmc_get_fclk_period();
|
|
|
|
return (time_ps + tick_ps - 1) / tick_ps;
|
|
}
|
|
|
|
unsigned int gpmc_ticks_to_ns(unsigned int ticks)
|
|
{
|
|
return ticks * gpmc_get_fclk_period() / 1000;
|
|
}
|
|
|
|
unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns)
|
|
{
|
|
unsigned long ticks = gpmc_ns_to_ticks(time_ns);
|
|
|
|
return ticks * gpmc_get_fclk_period() / 1000;
|
|
}
|
|
|
|
#ifdef DEBUG
|
|
static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
|
|
int time, const char *name)
|
|
#else
|
|
static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
|
|
int time)
|
|
#endif
|
|
{
|
|
u32 l;
|
|
int ticks, mask, nr_bits;
|
|
|
|
if (time == 0)
|
|
ticks = 0;
|
|
else
|
|
ticks = gpmc_ns_to_ticks(time);
|
|
nr_bits = end_bit - st_bit + 1;
|
|
if (ticks >= 1 << nr_bits) {
|
|
#ifdef DEBUG
|
|
printk(KERN_INFO "GPMC CS%d: %-10s* %3d ns, %3d ticks >= %d\n",
|
|
cs, name, time, ticks, 1 << nr_bits);
|
|
#endif
|
|
return -1;
|
|
}
|
|
|
|
mask = (1 << nr_bits) - 1;
|
|
l = gpmc_cs_read_reg(cs, reg);
|
|
#ifdef DEBUG
|
|
printk(KERN_INFO
|
|
"GPMC CS%d: %-10s: %3d ticks, %3lu ns (was %3i ticks) %3d ns\n",
|
|
cs, name, ticks, gpmc_get_fclk_period() * ticks / 1000,
|
|
(l >> st_bit) & mask, time);
|
|
#endif
|
|
l &= ~(mask << st_bit);
|
|
l |= ticks << st_bit;
|
|
gpmc_cs_write_reg(cs, reg, l);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef DEBUG
|
|
#define GPMC_SET_ONE(reg, st, end, field) \
|
|
if (set_gpmc_timing_reg(cs, (reg), (st), (end), \
|
|
t->field, #field) < 0) \
|
|
return -1
|
|
#else
|
|
#define GPMC_SET_ONE(reg, st, end, field) \
|
|
if (set_gpmc_timing_reg(cs, (reg), (st), (end), t->field) < 0) \
|
|
return -1
|
|
#endif
|
|
|
|
int gpmc_cs_calc_divider(int cs, unsigned int sync_clk)
|
|
{
|
|
int div;
|
|
u32 l;
|
|
|
|
l = sync_clk + (gpmc_get_fclk_period() - 1);
|
|
div = l / gpmc_get_fclk_period();
|
|
if (div > 4)
|
|
return -1;
|
|
if (div <= 0)
|
|
div = 1;
|
|
|
|
return div;
|
|
}
|
|
|
|
int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t)
|
|
{
|
|
int div;
|
|
u32 l;
|
|
|
|
div = gpmc_cs_calc_divider(cs, t->sync_clk);
|
|
if (div < 0)
|
|
return -1;
|
|
|
|
GPMC_SET_ONE(GPMC_CS_CONFIG2, 0, 3, cs_on);
|
|
GPMC_SET_ONE(GPMC_CS_CONFIG2, 8, 12, cs_rd_off);
|
|
GPMC_SET_ONE(GPMC_CS_CONFIG2, 16, 20, cs_wr_off);
|
|
|
|
GPMC_SET_ONE(GPMC_CS_CONFIG3, 0, 3, adv_on);
|
|
GPMC_SET_ONE(GPMC_CS_CONFIG3, 8, 12, adv_rd_off);
|
|
GPMC_SET_ONE(GPMC_CS_CONFIG3, 16, 20, adv_wr_off);
|
|
|
|
GPMC_SET_ONE(GPMC_CS_CONFIG4, 0, 3, oe_on);
|
|
GPMC_SET_ONE(GPMC_CS_CONFIG4, 8, 12, oe_off);
|
|
GPMC_SET_ONE(GPMC_CS_CONFIG4, 16, 19, we_on);
|
|
GPMC_SET_ONE(GPMC_CS_CONFIG4, 24, 28, we_off);
|
|
|
|
GPMC_SET_ONE(GPMC_CS_CONFIG5, 0, 4, rd_cycle);
|
|
GPMC_SET_ONE(GPMC_CS_CONFIG5, 8, 12, wr_cycle);
|
|
GPMC_SET_ONE(GPMC_CS_CONFIG5, 16, 20, access);
|
|
|
|
GPMC_SET_ONE(GPMC_CS_CONFIG5, 24, 27, page_burst_access);
|
|
|
|
if (cpu_is_omap34xx()) {
|
|
GPMC_SET_ONE(GPMC_CS_CONFIG6, 16, 19, wr_data_mux_bus);
|
|
GPMC_SET_ONE(GPMC_CS_CONFIG6, 24, 28, wr_access);
|
|
}
|
|
|
|
/* caller is expected to have initialized CONFIG1 to cover
|
|
* at least sync vs async
|
|
*/
|
|
l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
|
|
if (l & (GPMC_CONFIG1_READTYPE_SYNC | GPMC_CONFIG1_WRITETYPE_SYNC)) {
|
|
#ifdef DEBUG
|
|
printk(KERN_INFO "GPMC CS%d CLK period is %lu ns (div %d)\n",
|
|
cs, (div * gpmc_get_fclk_period()) / 1000, div);
|
|
#endif
|
|
l &= ~0x03;
|
|
l |= (div - 1);
|
|
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, l);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void gpmc_cs_enable_mem(int cs, u32 base, u32 size)
|
|
{
|
|
u32 l;
|
|
u32 mask;
|
|
|
|
mask = (1 << GPMC_SECTION_SHIFT) - size;
|
|
l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
|
|
l &= ~0x3f;
|
|
l = (base >> GPMC_CHUNK_SHIFT) & 0x3f;
|
|
l &= ~(0x0f << 8);
|
|
l |= ((mask >> GPMC_CHUNK_SHIFT) & 0x0f) << 8;
|
|
l |= GPMC_CONFIG7_CSVALID;
|
|
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l);
|
|
}
|
|
|
|
static void gpmc_cs_disable_mem(int cs)
|
|
{
|
|
u32 l;
|
|
|
|
l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
|
|
l &= ~GPMC_CONFIG7_CSVALID;
|
|
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l);
|
|
}
|
|
|
|
static void gpmc_cs_get_memconf(int cs, u32 *base, u32 *size)
|
|
{
|
|
u32 l;
|
|
u32 mask;
|
|
|
|
l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
|
|
*base = (l & 0x3f) << GPMC_CHUNK_SHIFT;
|
|
mask = (l >> 8) & 0x0f;
|
|
*size = (1 << GPMC_SECTION_SHIFT) - (mask << GPMC_CHUNK_SHIFT);
|
|
}
|
|
|
|
static int gpmc_cs_mem_enabled(int cs)
|
|
{
|
|
u32 l;
|
|
|
|
l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
|
|
return l & GPMC_CONFIG7_CSVALID;
|
|
}
|
|
|
|
int gpmc_cs_set_reserved(int cs, int reserved)
|
|
{
|
|
if (cs > GPMC_CS_NUM)
|
|
return -ENODEV;
|
|
|
|
gpmc_cs_map &= ~(1 << cs);
|
|
gpmc_cs_map |= (reserved ? 1 : 0) << cs;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int gpmc_cs_reserved(int cs)
|
|
{
|
|
if (cs > GPMC_CS_NUM)
|
|
return -ENODEV;
|
|
|
|
return gpmc_cs_map & (1 << cs);
|
|
}
|
|
|
|
static unsigned long gpmc_mem_align(unsigned long size)
|
|
{
|
|
int order;
|
|
|
|
size = (size - 1) >> (GPMC_CHUNK_SHIFT - 1);
|
|
order = GPMC_CHUNK_SHIFT - 1;
|
|
do {
|
|
size >>= 1;
|
|
order++;
|
|
} while (size);
|
|
size = 1 << order;
|
|
return size;
|
|
}
|
|
|
|
static int gpmc_cs_insert_mem(int cs, unsigned long base, unsigned long size)
|
|
{
|
|
struct resource *res = &gpmc_cs_mem[cs];
|
|
int r;
|
|
|
|
size = gpmc_mem_align(size);
|
|
spin_lock(&gpmc_mem_lock);
|
|
res->start = base;
|
|
res->end = base + size - 1;
|
|
r = request_resource(&gpmc_mem_root, res);
|
|
spin_unlock(&gpmc_mem_lock);
|
|
|
|
return r;
|
|
}
|
|
|
|
int gpmc_cs_request(int cs, unsigned long size, unsigned long *base)
|
|
{
|
|
struct resource *res = &gpmc_cs_mem[cs];
|
|
int r = -1;
|
|
|
|
if (cs > GPMC_CS_NUM)
|
|
return -ENODEV;
|
|
|
|
size = gpmc_mem_align(size);
|
|
if (size > (1 << GPMC_SECTION_SHIFT))
|
|
return -ENOMEM;
|
|
|
|
spin_lock(&gpmc_mem_lock);
|
|
if (gpmc_cs_reserved(cs)) {
|
|
r = -EBUSY;
|
|
goto out;
|
|
}
|
|
if (gpmc_cs_mem_enabled(cs))
|
|
r = adjust_resource(res, res->start & ~(size - 1), size);
|
|
if (r < 0)
|
|
r = allocate_resource(&gpmc_mem_root, res, size, 0, ~0,
|
|
size, NULL, NULL);
|
|
if (r < 0)
|
|
goto out;
|
|
|
|
gpmc_cs_enable_mem(cs, res->start, resource_size(res));
|
|
*base = res->start;
|
|
gpmc_cs_set_reserved(cs, 1);
|
|
out:
|
|
spin_unlock(&gpmc_mem_lock);
|
|
return r;
|
|
}
|
|
EXPORT_SYMBOL(gpmc_cs_request);
|
|
|
|
void gpmc_cs_free(int cs)
|
|
{
|
|
spin_lock(&gpmc_mem_lock);
|
|
if (cs >= GPMC_CS_NUM || cs < 0 || !gpmc_cs_reserved(cs)) {
|
|
printk(KERN_ERR "Trying to free non-reserved GPMC CS%d\n", cs);
|
|
BUG();
|
|
spin_unlock(&gpmc_mem_lock);
|
|
return;
|
|
}
|
|
gpmc_cs_disable_mem(cs);
|
|
release_resource(&gpmc_cs_mem[cs]);
|
|
gpmc_cs_set_reserved(cs, 0);
|
|
spin_unlock(&gpmc_mem_lock);
|
|
}
|
|
EXPORT_SYMBOL(gpmc_cs_free);
|
|
|
|
/**
|
|
* gpmc_read_status - read access request to get the different gpmc status
|
|
* @cmd: command type
|
|
* @return status
|
|
*/
|
|
int gpmc_read_status(int cmd)
|
|
{
|
|
int status = -EINVAL;
|
|
u32 regval = 0;
|
|
|
|
switch (cmd) {
|
|
case GPMC_GET_IRQ_STATUS:
|
|
status = gpmc_read_reg(GPMC_IRQSTATUS);
|
|
break;
|
|
|
|
case GPMC_PREFETCH_FIFO_CNT:
|
|
regval = gpmc_read_reg(GPMC_PREFETCH_STATUS);
|
|
status = GPMC_PREFETCH_STATUS_FIFO_CNT(regval);
|
|
break;
|
|
|
|
case GPMC_PREFETCH_COUNT:
|
|
regval = gpmc_read_reg(GPMC_PREFETCH_STATUS);
|
|
status = GPMC_PREFETCH_STATUS_COUNT(regval);
|
|
break;
|
|
|
|
case GPMC_STATUS_BUFFER:
|
|
regval = gpmc_read_reg(GPMC_STATUS);
|
|
/* 1 : buffer is available to write */
|
|
status = regval & GPMC_STATUS_BUFF_EMPTY;
|
|
break;
|
|
|
|
default:
|
|
printk(KERN_ERR "gpmc_read_status: Not supported\n");
|
|
}
|
|
return status;
|
|
}
|
|
EXPORT_SYMBOL(gpmc_read_status);
|
|
|
|
/**
|
|
* gpmc_cs_configure - write request to configure gpmc
|
|
* @cs: chip select number
|
|
* @cmd: command type
|
|
* @wval: value to write
|
|
* @return status of the operation
|
|
*/
|
|
int gpmc_cs_configure(int cs, int cmd, int wval)
|
|
{
|
|
int err = 0;
|
|
u32 regval = 0;
|
|
|
|
switch (cmd) {
|
|
case GPMC_ENABLE_IRQ:
|
|
gpmc_write_reg(GPMC_IRQENABLE, wval);
|
|
break;
|
|
|
|
case GPMC_SET_IRQ_STATUS:
|
|
gpmc_write_reg(GPMC_IRQSTATUS, wval);
|
|
break;
|
|
|
|
case GPMC_CONFIG_WP:
|
|
regval = gpmc_read_reg(GPMC_CONFIG);
|
|
if (wval)
|
|
regval &= ~GPMC_CONFIG_WRITEPROTECT; /* WP is ON */
|
|
else
|
|
regval |= GPMC_CONFIG_WRITEPROTECT; /* WP is OFF */
|
|
gpmc_write_reg(GPMC_CONFIG, regval);
|
|
break;
|
|
|
|
case GPMC_CONFIG_RDY_BSY:
|
|
regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
|
|
if (wval)
|
|
regval |= WR_RD_PIN_MONITORING;
|
|
else
|
|
regval &= ~WR_RD_PIN_MONITORING;
|
|
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
|
|
break;
|
|
|
|
case GPMC_CONFIG_DEV_SIZE:
|
|
regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
|
|
|
|
/* clear 2 target bits */
|
|
regval &= ~GPMC_CONFIG1_DEVICESIZE(3);
|
|
|
|
/* set the proper value */
|
|
regval |= GPMC_CONFIG1_DEVICESIZE(wval);
|
|
|
|
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
|
|
break;
|
|
|
|
case GPMC_CONFIG_DEV_TYPE:
|
|
regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
|
|
regval |= GPMC_CONFIG1_DEVICETYPE(wval);
|
|
if (wval == GPMC_DEVICETYPE_NOR)
|
|
regval |= GPMC_CONFIG1_MUXADDDATA;
|
|
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
|
|
break;
|
|
|
|
default:
|
|
printk(KERN_ERR "gpmc_configure_cs: Not supported\n");
|
|
err = -EINVAL;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
EXPORT_SYMBOL(gpmc_cs_configure);
|
|
|
|
/**
|
|
* gpmc_nand_read - nand specific read access request
|
|
* @cs: chip select number
|
|
* @cmd: command type
|
|
*/
|
|
int gpmc_nand_read(int cs, int cmd)
|
|
{
|
|
int rval = -EINVAL;
|
|
|
|
switch (cmd) {
|
|
case GPMC_NAND_DATA:
|
|
rval = gpmc_cs_read_byte(cs, GPMC_CS_NAND_DATA);
|
|
break;
|
|
|
|
default:
|
|
printk(KERN_ERR "gpmc_read_nand_ctrl: Not supported\n");
|
|
}
|
|
return rval;
|
|
}
|
|
EXPORT_SYMBOL(gpmc_nand_read);
|
|
|
|
/**
|
|
* gpmc_nand_write - nand specific write request
|
|
* @cs: chip select number
|
|
* @cmd: command type
|
|
* @wval: value to write
|
|
*/
|
|
int gpmc_nand_write(int cs, int cmd, int wval)
|
|
{
|
|
int err = 0;
|
|
|
|
switch (cmd) {
|
|
case GPMC_NAND_COMMAND:
|
|
gpmc_cs_write_byte(cs, GPMC_CS_NAND_COMMAND, wval);
|
|
break;
|
|
|
|
case GPMC_NAND_ADDRESS:
|
|
gpmc_cs_write_byte(cs, GPMC_CS_NAND_ADDRESS, wval);
|
|
break;
|
|
|
|
case GPMC_NAND_DATA:
|
|
gpmc_cs_write_byte(cs, GPMC_CS_NAND_DATA, wval);
|
|
|
|
default:
|
|
printk(KERN_ERR "gpmc_write_nand_ctrl: Not supported\n");
|
|
err = -EINVAL;
|
|
}
|
|
return err;
|
|
}
|
|
EXPORT_SYMBOL(gpmc_nand_write);
|
|
|
|
|
|
|
|
/**
|
|
* gpmc_prefetch_enable - configures and starts prefetch transfer
|
|
* @cs: cs (chip select) number
|
|
* @fifo_th: fifo threshold to be used for read/ write
|
|
* @dma_mode: dma mode enable (1) or disable (0)
|
|
* @u32_count: number of bytes to be transferred
|
|
* @is_write: prefetch read(0) or write post(1) mode
|
|
*/
|
|
int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode,
|
|
unsigned int u32_count, int is_write)
|
|
{
|
|
|
|
if (fifo_th > PREFETCH_FIFOTHRESHOLD_MAX) {
|
|
pr_err("gpmc: fifo threshold is not supported\n");
|
|
return -1;
|
|
} else if (!(gpmc_read_reg(GPMC_PREFETCH_CONTROL))) {
|
|
/* Set the amount of bytes to be prefetched */
|
|
gpmc_write_reg(GPMC_PREFETCH_CONFIG2, u32_count);
|
|
|
|
/* Set dma/mpu mode, the prefetch read / post write and
|
|
* enable the engine. Set which cs is has requested for.
|
|
*/
|
|
gpmc_write_reg(GPMC_PREFETCH_CONFIG1, ((cs << CS_NUM_SHIFT) |
|
|
PREFETCH_FIFOTHRESHOLD(fifo_th) |
|
|
ENABLE_PREFETCH |
|
|
(dma_mode << DMA_MPU_MODE) |
|
|
(0x1 & is_write)));
|
|
|
|
/* Start the prefetch engine */
|
|
gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x1);
|
|
} else {
|
|
return -EBUSY;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(gpmc_prefetch_enable);
|
|
|
|
/**
|
|
* gpmc_prefetch_reset - disables and stops the prefetch engine
|
|
*/
|
|
int gpmc_prefetch_reset(int cs)
|
|
{
|
|
u32 config1;
|
|
|
|
/* check if the same module/cs is trying to reset */
|
|
config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1);
|
|
if (((config1 >> CS_NUM_SHIFT) & 0x7) != cs)
|
|
return -EINVAL;
|
|
|
|
/* Stop the PFPW engine */
|
|
gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x0);
|
|
|
|
/* Reset/disable the PFPW engine */
|
|
gpmc_write_reg(GPMC_PREFETCH_CONFIG1, 0x0);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(gpmc_prefetch_reset);
|
|
|
|
void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs)
|
|
{
|
|
reg->gpmc_status = gpmc_base + GPMC_STATUS;
|
|
reg->gpmc_nand_command = gpmc_base + GPMC_CS0_OFFSET +
|
|
GPMC_CS_NAND_COMMAND + GPMC_CS_SIZE * cs;
|
|
reg->gpmc_nand_address = gpmc_base + GPMC_CS0_OFFSET +
|
|
GPMC_CS_NAND_ADDRESS + GPMC_CS_SIZE * cs;
|
|
reg->gpmc_nand_data = gpmc_base + GPMC_CS0_OFFSET +
|
|
GPMC_CS_NAND_DATA + GPMC_CS_SIZE * cs;
|
|
reg->gpmc_prefetch_config1 = gpmc_base + GPMC_PREFETCH_CONFIG1;
|
|
reg->gpmc_prefetch_config2 = gpmc_base + GPMC_PREFETCH_CONFIG2;
|
|
reg->gpmc_prefetch_control = gpmc_base + GPMC_PREFETCH_CONTROL;
|
|
reg->gpmc_prefetch_status = gpmc_base + GPMC_PREFETCH_STATUS;
|
|
reg->gpmc_ecc_config = gpmc_base + GPMC_ECC_CONFIG;
|
|
reg->gpmc_ecc_control = gpmc_base + GPMC_ECC_CONTROL;
|
|
reg->gpmc_ecc_size_config = gpmc_base + GPMC_ECC_SIZE_CONFIG;
|
|
reg->gpmc_ecc1_result = gpmc_base + GPMC_ECC1_RESULT;
|
|
reg->gpmc_bch_result0 = gpmc_base + GPMC_ECC_BCH_RESULT_0;
|
|
}
|
|
|
|
int gpmc_get_client_irq(unsigned irq_config)
|
|
{
|
|
int i;
|
|
|
|
if (hweight32(irq_config) > 1)
|
|
return 0;
|
|
|
|
for (i = 0; i < GPMC_NR_IRQ; i++)
|
|
if (gpmc_client_irq[i].bitmask & irq_config)
|
|
return gpmc_client_irq[i].irq;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gpmc_irq_endis(unsigned irq, bool endis)
|
|
{
|
|
int i;
|
|
u32 regval;
|
|
|
|
for (i = 0; i < GPMC_NR_IRQ; i++)
|
|
if (irq == gpmc_client_irq[i].irq) {
|
|
regval = gpmc_read_reg(GPMC_IRQENABLE);
|
|
if (endis)
|
|
regval |= gpmc_client_irq[i].bitmask;
|
|
else
|
|
regval &= ~gpmc_client_irq[i].bitmask;
|
|
gpmc_write_reg(GPMC_IRQENABLE, regval);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void gpmc_irq_disable(struct irq_data *p)
|
|
{
|
|
gpmc_irq_endis(p->irq, false);
|
|
}
|
|
|
|
static void gpmc_irq_enable(struct irq_data *p)
|
|
{
|
|
gpmc_irq_endis(p->irq, true);
|
|
}
|
|
|
|
static void gpmc_irq_noop(struct irq_data *data) { }
|
|
|
|
static unsigned int gpmc_irq_noop_ret(struct irq_data *data) { return 0; }
|
|
|
|
static int gpmc_setup_irq(int gpmc_irq)
|
|
{
|
|
int i;
|
|
u32 regval;
|
|
|
|
if (!gpmc_irq)
|
|
return -EINVAL;
|
|
|
|
gpmc_irq_start = irq_alloc_descs(-1, 0, GPMC_NR_IRQ, 0);
|
|
if (IS_ERR_VALUE(gpmc_irq_start)) {
|
|
pr_err("irq_alloc_descs failed\n");
|
|
return gpmc_irq_start;
|
|
}
|
|
|
|
gpmc_irq_chip.name = "gpmc";
|
|
gpmc_irq_chip.irq_startup = gpmc_irq_noop_ret;
|
|
gpmc_irq_chip.irq_enable = gpmc_irq_enable;
|
|
gpmc_irq_chip.irq_disable = gpmc_irq_disable;
|
|
gpmc_irq_chip.irq_shutdown = gpmc_irq_noop;
|
|
gpmc_irq_chip.irq_ack = gpmc_irq_noop;
|
|
gpmc_irq_chip.irq_mask = gpmc_irq_noop;
|
|
gpmc_irq_chip.irq_unmask = gpmc_irq_noop;
|
|
|
|
gpmc_client_irq[0].bitmask = GPMC_IRQ_FIFOEVENTENABLE;
|
|
gpmc_client_irq[1].bitmask = GPMC_IRQ_COUNT_EVENT;
|
|
|
|
for (i = 0; i < GPMC_NR_IRQ; i++) {
|
|
gpmc_client_irq[i].irq = gpmc_irq_start + i;
|
|
irq_set_chip_and_handler(gpmc_client_irq[i].irq,
|
|
&gpmc_irq_chip, handle_simple_irq);
|
|
set_irq_flags(gpmc_client_irq[i].irq,
|
|
IRQF_VALID | IRQF_NOAUTOEN);
|
|
}
|
|
|
|
/* Disable interrupts */
|
|
gpmc_write_reg(GPMC_IRQENABLE, 0);
|
|
|
|
/* clear interrupts */
|
|
regval = gpmc_read_reg(GPMC_IRQSTATUS);
|
|
gpmc_write_reg(GPMC_IRQSTATUS, regval);
|
|
|
|
return request_irq(gpmc_irq, gpmc_handle_irq, 0, "gpmc", NULL);
|
|
}
|
|
|
|
static void __init gpmc_mem_init(void)
|
|
{
|
|
int cs;
|
|
unsigned long boot_rom_space = 0;
|
|
|
|
/* never allocate the first page, to facilitate bug detection;
|
|
* even if we didn't boot from ROM.
|
|
*/
|
|
boot_rom_space = BOOT_ROM_SPACE;
|
|
/* In apollon the CS0 is mapped as 0x0000 0000 */
|
|
if (machine_is_omap_apollon())
|
|
boot_rom_space = 0;
|
|
gpmc_mem_root.start = GPMC_MEM_START + boot_rom_space;
|
|
gpmc_mem_root.end = GPMC_MEM_END;
|
|
|
|
/* Reserve all regions that has been set up by bootloader */
|
|
for (cs = 0; cs < GPMC_CS_NUM; cs++) {
|
|
u32 base, size;
|
|
|
|
if (!gpmc_cs_mem_enabled(cs))
|
|
continue;
|
|
gpmc_cs_get_memconf(cs, &base, &size);
|
|
if (gpmc_cs_insert_mem(cs, base, size) < 0)
|
|
BUG();
|
|
}
|
|
}
|
|
|
|
static int __init gpmc_init(void)
|
|
{
|
|
u32 l;
|
|
int ret = -EINVAL;
|
|
int gpmc_irq;
|
|
char *ck = NULL;
|
|
|
|
if (cpu_is_omap24xx()) {
|
|
ck = "core_l3_ck";
|
|
if (cpu_is_omap2420())
|
|
l = OMAP2420_GPMC_BASE;
|
|
else
|
|
l = OMAP34XX_GPMC_BASE;
|
|
gpmc_irq = INT_34XX_GPMC_IRQ;
|
|
} else if (cpu_is_omap34xx()) {
|
|
ck = "gpmc_fck";
|
|
l = OMAP34XX_GPMC_BASE;
|
|
gpmc_irq = INT_34XX_GPMC_IRQ;
|
|
} else if (cpu_is_omap44xx() || soc_is_omap54xx()) {
|
|
/* Base address and irq number are same for OMAP4/5 */
|
|
ck = "gpmc_ck";
|
|
l = OMAP44XX_GPMC_BASE;
|
|
gpmc_irq = OMAP44XX_IRQ_GPMC;
|
|
}
|
|
|
|
if (WARN_ON(!ck))
|
|
return ret;
|
|
|
|
gpmc_l3_clk = clk_get(NULL, ck);
|
|
if (IS_ERR(gpmc_l3_clk)) {
|
|
printk(KERN_ERR "Could not get GPMC clock %s\n", ck);
|
|
BUG();
|
|
}
|
|
|
|
gpmc_base = ioremap(l, SZ_4K);
|
|
if (!gpmc_base) {
|
|
clk_put(gpmc_l3_clk);
|
|
printk(KERN_ERR "Could not get GPMC register memory\n");
|
|
BUG();
|
|
}
|
|
|
|
clk_enable(gpmc_l3_clk);
|
|
|
|
l = gpmc_read_reg(GPMC_REVISION);
|
|
printk(KERN_INFO "GPMC revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
|
|
/* Set smart idle mode and automatic L3 clock gating */
|
|
l = gpmc_read_reg(GPMC_SYSCONFIG);
|
|
l &= 0x03 << 3;
|
|
l |= (0x02 << 3) | (1 << 0);
|
|
gpmc_write_reg(GPMC_SYSCONFIG, l);
|
|
gpmc_mem_init();
|
|
|
|
ret = gpmc_setup_irq(gpmc_irq);
|
|
if (ret)
|
|
pr_err("gpmc: irq-%d could not claim: err %d\n",
|
|
gpmc_irq, ret);
|
|
return ret;
|
|
}
|
|
postcore_initcall(gpmc_init);
|
|
|
|
static irqreturn_t gpmc_handle_irq(int irq, void *dev)
|
|
{
|
|
int i;
|
|
u32 regval;
|
|
|
|
regval = gpmc_read_reg(GPMC_IRQSTATUS);
|
|
|
|
if (!regval)
|
|
return IRQ_NONE;
|
|
|
|
for (i = 0; i < GPMC_NR_IRQ; i++)
|
|
if (regval & gpmc_client_irq[i].bitmask)
|
|
generic_handle_irq(gpmc_client_irq[i].irq);
|
|
|
|
gpmc_write_reg(GPMC_IRQSTATUS, regval);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
#ifdef CONFIG_ARCH_OMAP3
|
|
static struct omap3_gpmc_regs gpmc_context;
|
|
|
|
void omap3_gpmc_save_context(void)
|
|
{
|
|
int i;
|
|
|
|
gpmc_context.sysconfig = gpmc_read_reg(GPMC_SYSCONFIG);
|
|
gpmc_context.irqenable = gpmc_read_reg(GPMC_IRQENABLE);
|
|
gpmc_context.timeout_ctrl = gpmc_read_reg(GPMC_TIMEOUT_CONTROL);
|
|
gpmc_context.config = gpmc_read_reg(GPMC_CONFIG);
|
|
gpmc_context.prefetch_config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1);
|
|
gpmc_context.prefetch_config2 = gpmc_read_reg(GPMC_PREFETCH_CONFIG2);
|
|
gpmc_context.prefetch_control = gpmc_read_reg(GPMC_PREFETCH_CONTROL);
|
|
for (i = 0; i < GPMC_CS_NUM; i++) {
|
|
gpmc_context.cs_context[i].is_valid = gpmc_cs_mem_enabled(i);
|
|
if (gpmc_context.cs_context[i].is_valid) {
|
|
gpmc_context.cs_context[i].config1 =
|
|
gpmc_cs_read_reg(i, GPMC_CS_CONFIG1);
|
|
gpmc_context.cs_context[i].config2 =
|
|
gpmc_cs_read_reg(i, GPMC_CS_CONFIG2);
|
|
gpmc_context.cs_context[i].config3 =
|
|
gpmc_cs_read_reg(i, GPMC_CS_CONFIG3);
|
|
gpmc_context.cs_context[i].config4 =
|
|
gpmc_cs_read_reg(i, GPMC_CS_CONFIG4);
|
|
gpmc_context.cs_context[i].config5 =
|
|
gpmc_cs_read_reg(i, GPMC_CS_CONFIG5);
|
|
gpmc_context.cs_context[i].config6 =
|
|
gpmc_cs_read_reg(i, GPMC_CS_CONFIG6);
|
|
gpmc_context.cs_context[i].config7 =
|
|
gpmc_cs_read_reg(i, GPMC_CS_CONFIG7);
|
|
}
|
|
}
|
|
}
|
|
|
|
void omap3_gpmc_restore_context(void)
|
|
{
|
|
int i;
|
|
|
|
gpmc_write_reg(GPMC_SYSCONFIG, gpmc_context.sysconfig);
|
|
gpmc_write_reg(GPMC_IRQENABLE, gpmc_context.irqenable);
|
|
gpmc_write_reg(GPMC_TIMEOUT_CONTROL, gpmc_context.timeout_ctrl);
|
|
gpmc_write_reg(GPMC_CONFIG, gpmc_context.config);
|
|
gpmc_write_reg(GPMC_PREFETCH_CONFIG1, gpmc_context.prefetch_config1);
|
|
gpmc_write_reg(GPMC_PREFETCH_CONFIG2, gpmc_context.prefetch_config2);
|
|
gpmc_write_reg(GPMC_PREFETCH_CONTROL, gpmc_context.prefetch_control);
|
|
for (i = 0; i < GPMC_CS_NUM; i++) {
|
|
if (gpmc_context.cs_context[i].is_valid) {
|
|
gpmc_cs_write_reg(i, GPMC_CS_CONFIG1,
|
|
gpmc_context.cs_context[i].config1);
|
|
gpmc_cs_write_reg(i, GPMC_CS_CONFIG2,
|
|
gpmc_context.cs_context[i].config2);
|
|
gpmc_cs_write_reg(i, GPMC_CS_CONFIG3,
|
|
gpmc_context.cs_context[i].config3);
|
|
gpmc_cs_write_reg(i, GPMC_CS_CONFIG4,
|
|
gpmc_context.cs_context[i].config4);
|
|
gpmc_cs_write_reg(i, GPMC_CS_CONFIG5,
|
|
gpmc_context.cs_context[i].config5);
|
|
gpmc_cs_write_reg(i, GPMC_CS_CONFIG6,
|
|
gpmc_context.cs_context[i].config6);
|
|
gpmc_cs_write_reg(i, GPMC_CS_CONFIG7,
|
|
gpmc_context.cs_context[i].config7);
|
|
}
|
|
}
|
|
}
|
|
#endif /* CONFIG_ARCH_OMAP3 */
|
|
|
|
/**
|
|
* gpmc_enable_hwecc - enable hardware ecc functionality
|
|
* @cs: chip select number
|
|
* @mode: read/write mode
|
|
* @dev_width: device bus width(1 for x16, 0 for x8)
|
|
* @ecc_size: bytes for which ECC will be generated
|
|
*/
|
|
int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size)
|
|
{
|
|
unsigned int val;
|
|
|
|
/* check if ecc module is in used */
|
|
if (gpmc_ecc_used != -EINVAL)
|
|
return -EINVAL;
|
|
|
|
gpmc_ecc_used = cs;
|
|
|
|
/* clear ecc and enable bits */
|
|
gpmc_write_reg(GPMC_ECC_CONTROL,
|
|
GPMC_ECC_CTRL_ECCCLEAR |
|
|
GPMC_ECC_CTRL_ECCREG1);
|
|
|
|
/* program ecc and result sizes */
|
|
val = ((((ecc_size >> 1) - 1) << 22) | (0x0000000F));
|
|
gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, val);
|
|
|
|
switch (mode) {
|
|
case GPMC_ECC_READ:
|
|
case GPMC_ECC_WRITE:
|
|
gpmc_write_reg(GPMC_ECC_CONTROL,
|
|
GPMC_ECC_CTRL_ECCCLEAR |
|
|
GPMC_ECC_CTRL_ECCREG1);
|
|
break;
|
|
case GPMC_ECC_READSYN:
|
|
gpmc_write_reg(GPMC_ECC_CONTROL,
|
|
GPMC_ECC_CTRL_ECCCLEAR |
|
|
GPMC_ECC_CTRL_ECCDISABLE);
|
|
break;
|
|
default:
|
|
printk(KERN_INFO "Error: Unrecognized Mode[%d]!\n", mode);
|
|
break;
|
|
}
|
|
|
|
/* (ECC 16 or 8 bit col) | ( CS ) | ECC Enable */
|
|
val = (dev_width << 7) | (cs << 1) | (0x1);
|
|
gpmc_write_reg(GPMC_ECC_CONFIG, val);
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpmc_enable_hwecc);
|
|
|
|
/**
|
|
* gpmc_calculate_ecc - generate non-inverted ecc bytes
|
|
* @cs: chip select number
|
|
* @dat: data pointer over which ecc is computed
|
|
* @ecc_code: ecc code buffer
|
|
*
|
|
* Using non-inverted ECC is considered ugly since writing a blank
|
|
* page (padding) will clear the ECC bytes. This is not a problem as long
|
|
* no one is trying to write data on the seemingly unused page. Reading
|
|
* an erased page will produce an ECC mismatch between generated and read
|
|
* ECC bytes that has to be dealt with separately.
|
|
*/
|
|
int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code)
|
|
{
|
|
unsigned int val = 0x0;
|
|
|
|
if (gpmc_ecc_used != cs)
|
|
return -EINVAL;
|
|
|
|
/* read ecc result */
|
|
val = gpmc_read_reg(GPMC_ECC1_RESULT);
|
|
*ecc_code++ = val; /* P128e, ..., P1e */
|
|
*ecc_code++ = val >> 16; /* P128o, ..., P1o */
|
|
/* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */
|
|
*ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0);
|
|
|
|
gpmc_ecc_used = -EINVAL;
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpmc_calculate_ecc);
|
|
|
|
#ifdef CONFIG_ARCH_OMAP3
|
|
|
|
/**
|
|
* gpmc_init_hwecc_bch - initialize hardware BCH ecc functionality
|
|
* @cs: chip select number
|
|
* @nsectors: how many 512-byte sectors to process
|
|
* @nerrors: how many errors to correct per sector (4 or 8)
|
|
*
|
|
* This function must be executed before any call to gpmc_enable_hwecc_bch.
|
|
*/
|
|
int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors)
|
|
{
|
|
/* check if ecc module is in use */
|
|
if (gpmc_ecc_used != -EINVAL)
|
|
return -EINVAL;
|
|
|
|
/* support only OMAP3 class */
|
|
if (!cpu_is_omap34xx()) {
|
|
printk(KERN_ERR "BCH ecc is not supported on this CPU\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1.
|
|
* Other chips may be added if confirmed to work.
|
|
*/
|
|
if ((nerrors == 4) &&
|
|
(!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) {
|
|
printk(KERN_ERR "BCH 4-bit mode is not supported on this CPU\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* sanity check */
|
|
if (nsectors > 8) {
|
|
printk(KERN_ERR "BCH cannot process %d sectors (max is 8)\n",
|
|
nsectors);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpmc_init_hwecc_bch);
|
|
|
|
/**
|
|
* gpmc_enable_hwecc_bch - enable hardware BCH ecc functionality
|
|
* @cs: chip select number
|
|
* @mode: read/write mode
|
|
* @dev_width: device bus width(1 for x16, 0 for x8)
|
|
* @nsectors: how many 512-byte sectors to process
|
|
* @nerrors: how many errors to correct per sector (4 or 8)
|
|
*/
|
|
int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors,
|
|
int nerrors)
|
|
{
|
|
unsigned int val;
|
|
|
|
/* check if ecc module is in use */
|
|
if (gpmc_ecc_used != -EINVAL)
|
|
return -EINVAL;
|
|
|
|
gpmc_ecc_used = cs;
|
|
|
|
/* clear ecc and enable bits */
|
|
gpmc_write_reg(GPMC_ECC_CONTROL, 0x1);
|
|
|
|
/*
|
|
* When using BCH, sector size is hardcoded to 512 bytes.
|
|
* Here we are using wrapping mode 6 both for reading and writing, with:
|
|
* size0 = 0 (no additional protected byte in spare area)
|
|
* size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area)
|
|
*/
|
|
gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, (32 << 22) | (0 << 12));
|
|
|
|
/* BCH configuration */
|
|
val = ((1 << 16) | /* enable BCH */
|
|
(((nerrors == 8) ? 1 : 0) << 12) | /* 8 or 4 bits */
|
|
(0x06 << 8) | /* wrap mode = 6 */
|
|
(dev_width << 7) | /* bus width */
|
|
(((nsectors-1) & 0x7) << 4) | /* number of sectors */
|
|
(cs << 1) | /* ECC CS */
|
|
(0x1)); /* enable ECC */
|
|
|
|
gpmc_write_reg(GPMC_ECC_CONFIG, val);
|
|
gpmc_write_reg(GPMC_ECC_CONTROL, 0x101);
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpmc_enable_hwecc_bch);
|
|
|
|
/**
|
|
* gpmc_calculate_ecc_bch4 - Generate 7 ecc bytes per sector of 512 data bytes
|
|
* @cs: chip select number
|
|
* @dat: The pointer to data on which ecc is computed
|
|
* @ecc: The ecc output buffer
|
|
*/
|
|
int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc)
|
|
{
|
|
int i;
|
|
unsigned long nsectors, reg, val1, val2;
|
|
|
|
if (gpmc_ecc_used != cs)
|
|
return -EINVAL;
|
|
|
|
nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1;
|
|
|
|
for (i = 0; i < nsectors; i++) {
|
|
|
|
reg = GPMC_ECC_BCH_RESULT_0 + 16*i;
|
|
|
|
/* Read hw-computed remainder */
|
|
val1 = gpmc_read_reg(reg + 0);
|
|
val2 = gpmc_read_reg(reg + 4);
|
|
|
|
/*
|
|
* Add constant polynomial to remainder, in order to get an ecc
|
|
* sequence of 0xFFs for a buffer filled with 0xFFs; and
|
|
* left-justify the resulting polynomial.
|
|
*/
|
|
*ecc++ = 0x28 ^ ((val2 >> 12) & 0xFF);
|
|
*ecc++ = 0x13 ^ ((val2 >> 4) & 0xFF);
|
|
*ecc++ = 0xcc ^ (((val2 & 0xF) << 4)|((val1 >> 28) & 0xF));
|
|
*ecc++ = 0x39 ^ ((val1 >> 20) & 0xFF);
|
|
*ecc++ = 0x96 ^ ((val1 >> 12) & 0xFF);
|
|
*ecc++ = 0xac ^ ((val1 >> 4) & 0xFF);
|
|
*ecc++ = 0x7f ^ ((val1 & 0xF) << 4);
|
|
}
|
|
|
|
gpmc_ecc_used = -EINVAL;
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch4);
|
|
|
|
/**
|
|
* gpmc_calculate_ecc_bch8 - Generate 13 ecc bytes per block of 512 data bytes
|
|
* @cs: chip select number
|
|
* @dat: The pointer to data on which ecc is computed
|
|
* @ecc: The ecc output buffer
|
|
*/
|
|
int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc)
|
|
{
|
|
int i;
|
|
unsigned long nsectors, reg, val1, val2, val3, val4;
|
|
|
|
if (gpmc_ecc_used != cs)
|
|
return -EINVAL;
|
|
|
|
nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1;
|
|
|
|
for (i = 0; i < nsectors; i++) {
|
|
|
|
reg = GPMC_ECC_BCH_RESULT_0 + 16*i;
|
|
|
|
/* Read hw-computed remainder */
|
|
val1 = gpmc_read_reg(reg + 0);
|
|
val2 = gpmc_read_reg(reg + 4);
|
|
val3 = gpmc_read_reg(reg + 8);
|
|
val4 = gpmc_read_reg(reg + 12);
|
|
|
|
/*
|
|
* Add constant polynomial to remainder, in order to get an ecc
|
|
* sequence of 0xFFs for a buffer filled with 0xFFs.
|
|
*/
|
|
*ecc++ = 0xef ^ (val4 & 0xFF);
|
|
*ecc++ = 0x51 ^ ((val3 >> 24) & 0xFF);
|
|
*ecc++ = 0x2e ^ ((val3 >> 16) & 0xFF);
|
|
*ecc++ = 0x09 ^ ((val3 >> 8) & 0xFF);
|
|
*ecc++ = 0xed ^ (val3 & 0xFF);
|
|
*ecc++ = 0x93 ^ ((val2 >> 24) & 0xFF);
|
|
*ecc++ = 0x9a ^ ((val2 >> 16) & 0xFF);
|
|
*ecc++ = 0xc2 ^ ((val2 >> 8) & 0xFF);
|
|
*ecc++ = 0x97 ^ (val2 & 0xFF);
|
|
*ecc++ = 0x79 ^ ((val1 >> 24) & 0xFF);
|
|
*ecc++ = 0xe5 ^ ((val1 >> 16) & 0xFF);
|
|
*ecc++ = 0x24 ^ ((val1 >> 8) & 0xFF);
|
|
*ecc++ = 0xb5 ^ (val1 & 0xFF);
|
|
}
|
|
|
|
gpmc_ecc_used = -EINVAL;
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch8);
|
|
|
|
#endif /* CONFIG_ARCH_OMAP3 */
|