leandrof/linux
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
mainlining shenanigans
1,088,623 Commits 2 Branches 0 Tags 5.1 GiB
C 97.7%
Assembly 1.1%
Shell 0.4%
Makefile 0.3%
Python 0.2%
Other 0.1%
aebef63cf7
Go to file
Wyes Karny aebef63cf7 x86: Remove vendor checks from prefer_mwait_c1_over_halt 
Remove vendor checks from prefer_mwait_c1_over_halt function. Restore
the decision tree to support MWAIT C1 as the default idle state based on
CPUID checks as done by Thomas Gleixner in
commit 09fd4b4ef5 ("x86: use cpuid to check MWAIT support for C1")

The decision tree is removed in
commit 69fb3676df ("x86 idle: remove mwait_idle() and "idle=mwait" cmdline param")

Prefer MWAIT when the following conditions are satisfied:
    1. CPUID_Fn00000001_ECX [Monitor] should be set
    2. CPUID_Fn00000005 should be supported
    3. If CPUID_Fn00000005_ECX [EMX] is set then there should be
       at least one C1 substate available, indicated by
       CPUID_Fn00000005_EDX [MWaitC1SubStates] bits.

Otherwise use HLT for default_idle function.

HPC customers who want to optimize for lower latency are known to
disable Global C-States in the BIOS. In fact, some vendors allow
choosing a BIOS 'performance' profile which explicitly disables
C-States.  In this scenario, the cpuidle driver will not be loaded and
the kernel will continue with the default idle state chosen at boot
time. On AMD systems currently the default idle state is HLT which has
a higher exit latency compared to MWAIT.

The reason for the choice of HLT over MWAIT on AMD systems is:

1. Families prior to 10h didn't support MWAIT
2. Families 10h-15h supported MWAIT, but not MWAIT C1. Hence it was
   preferable to use HLT as the default state on these systems.

However, AMD Family 17h onwards supports MWAIT as well as MWAIT C1. And
it is preferable to use MWAIT as the default idle state on these
systems, as it has lower exit latencies.

The below table represents the exit latency for HLT and MWAIT on AMD
Zen 3 system. Exit latency is measured by issuing a wakeup (IPI) to
other CPU and measuring how many clock cycles it took to wakeup.  Each
iteration measures 10K wakeups by pinning source and destination.

HLT:

25.0000th percentile  :      1900 ns
50.0000th percentile  :      2000 ns
75.0000th percentile  :      2300 ns
90.0000th percentile  :      2500 ns
95.0000th percentile  :      2600 ns
99.0000th percentile  :      2800 ns
99.5000th percentile  :      3000 ns
99.9000th percentile  :      3400 ns
99.9500th percentile  :      3600 ns
99.9900th percentile  :      5900 ns
  Min latency         :      1700 ns
  Max latency         :      5900 ns
Total Samples      9999

MWAIT:

25.0000th percentile  :      1400 ns
50.0000th percentile  :      1500 ns
75.0000th percentile  :      1700 ns
90.0000th percentile  :      1800 ns
95.0000th percentile  :      1900 ns
99.0000th percentile  :      2300 ns
99.5000th percentile  :      2500 ns
99.9000th percentile  :      3200 ns
99.9500th percentile  :      3500 ns
99.9900th percentile  :      4600 ns
  Min latency         :      1200 ns
  Max latency         :      4600 ns
Total Samples      9997

Improvement (99th percentile): 21.74%

Below is another result for context_switch2 micro-benchmark, which
brings out the impact of improved wakeup latency through increased
context-switches per second.

with HLT:
-------------------------------
50.0000th percentile  :  190184
75.0000th percentile  :  191032
90.0000th percentile  :  192314
95.0000th percentile  :  192520
99.0000th percentile  :  192844
MIN  :  190148
MAX  :  192852

with MWAIT:
-------------------------------
50.0000th percentile  :  277444
75.0000th percentile  :  278268
90.0000th percentile  :  278888
95.0000th percentile  :  279164
99.0000th percentile  :  280504
MIN  :  273278
MAX  :  281410

Improvement(99th percentile): ~ 45.46%

Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Link: https://ozlabs.org/~anton/junkcode/context_switch2.c
Link: https://lkml.kernel.org/r/0cc675d8fd1f55e41b510e10abf2e21b6e9803d5.1654538381.git-series.wyes.karny@amd.com
2022-06-08 13:00:19 -07:00
arch x86: Remove vendor checks from prefer_mwait_c1_over_halt 2022-06-08 13:00:19 -07:00
block for-5.18/block-2022-04-01 2022-04-01 16:20:00 -07:00
certs Kbuild updates for v5.18 2022-03-31 11:59:03 -07:00
crypto for-5.18/64bit-pi-2022-03-25 2022-03-26 12:01:35 -07:00
Documentation x86: Handle idle=nomwait cmdline properly for x86_idle 2022-06-08 12:58:58 -07:00
drivers A single revert to fix a boot regression seen when clk_put() started 2022-04-03 12:21:14 -07:00
fs Updates to Tracing: 2022-04-03 12:26:01 -07:00
include x86/speculation: Add missing prototype for unpriv_ebpf_notify() 2022-04-28 11:12:17 +02:00
init Kbuild updates for v5.18 2022-03-31 11:59:03 -07:00
ipc fs: allocate inode by using alloc_inode_sb() 2022-03-22 15:57:03 -07:00
kernel Updates to Tracing: 2022-04-03 12:26:01 -07:00
lib for-5.18/block-2022-04-01 2022-04-01 16:20:00 -07:00
LICENSES LICENSES/LGPL-2.1: Add LGPL-2.1-or-later as valid identifiers 2021-12-16 14:33:10 +01:00
mm Filesystem/VFS changes for 5.18, part two 2022-04-01 13:50:50 -07:00
net Networking fixes for 5.18-rc1 and rethook patches. 2022-03-31 11:23:31 -07:00
samples dma-mapping updates for Linux 5.18 2022-03-29 08:50:14 -07:00
scripts x86/cpu: Remove CONFIG_X86_SMAP and "nosmap" 2022-04-04 10:16:57 +02:00
security hardening updates for v5.18-rc1-fix1 2022-03-31 11:43:01 -07:00
sound sound fixes for 5.18-rc1 2022-04-01 10:32:46 -07:00
tools x86/cpu: Remove CONFIG_X86_SMAP and "nosmap" 2022-04-04 10:16:57 +02:00
usr Kbuild updates for v5.18 2022-03-31 11:59:03 -07:00
virt KVM: Remove dirty handling from gfn_to_pfn_cache completely 2022-04-02 05:34:41 -04:00
.clang-format genirq/msi: Make interrupt allocation less convoluted 2021-12-16 22:22:20 +01:00
.cocciconfig
.get_maintainer.ignore Opt out of scripts/get_maintainer.pl 2019-05-16 10:53:40 -07:00
.gitattributes .gitattributes: use 'dts' diff driver for dts files 2019-12-04 19:44:11 -08:00
.gitignore .gitignore: ignore only top-level modules.builtin 2021-05-02 00:43:35 +09:00
.mailmap mailmap: update Kirill's email 2022-04-01 11:46:09 -07:00
COPYING COPYING: state that all contributions really are covered by this file 2020-02-10 13:32:20 -08:00
CREDITS MAINTAINERS: replace a Microchip AT91 maintainer 2022-02-09 11:30:01 +01:00
Kbuild kbuild: rename hostprogs-y/always to hostprogs/always-y 2020-02-04 01:53:07 +09:00
Kconfig kbuild: ensure full rebuild when the compiler is updated 2020-05-12 13:28:33 +09:00
MAINTAINERS chrome platform changes for 5.18 2022-04-02 10:44:18 -07:00
Makefile Linux 5.18-rc1 2022-04-03 14:08:21 -07:00
README Drop all 00-INDEX files from Documentation/ 2018-09-09 15:08:58 -06:00

README 

Linux kernel
============

There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.

In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``.  The formatted documentation can also be read online at:

    https://www.kernel.org/doc/html/latest/

There are various text files in the Documentation/ subdirectory,
several of them using the Restructured Text markup notation.

Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.