linux/drivers/usb
Sarah Sharp ae8963adb4 usb: Don't enable LPM if the exit latency is zero.
Some USB 3.0 devices signal that they don't implement Link PM by having
all zeroes in the U1/U2 exit latencies in their SuperSpeed BOS
descriptor.  Don found that a Western Digital device he has experiences
transfer errors when LPM is enabled.  The lsusb shows the U1/U2 exit
latencies are set to zero:

Binary Object Store Descriptor:
  bLength                 5
  bDescriptorType        15
  wTotalLength           22
  bNumDeviceCaps          2
  SuperSpeed USB Device Capability:
    bLength                10
    bDescriptorType        16
    bDevCapabilityType      3
    bmAttributes         0x00
      Latency Tolerance Messages (LTM) Supported
    wSpeedsSupported   0x000e
      Device can operate at Full Speed (12Mbps)
      Device can operate at High Speed (480Mbps)
      Device can operate at SuperSpeed (5Gbps)
    bFunctionalitySupport   1
      Lowest fully-functional device speed is Full Speed (12Mbps)
    bU1DevExitLat           0 micro seconds
    bU2DevExitLat           0 micro seconds

The fix is to not enable LPM for a particular link state if we find its
corresponding exit latency is zero.

This patch should be backported to kernels as old as 3.5, that contain
the commit 1ea7e0e8e3 "USB: Add support to
enable/disable USB3 link states."

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: Don Zickus <dzickus@redhat.com>
Tested-by: Don Zickus <dzickus@redhat.com>
Cc: stable@vger.kernel.org
2012-10-08 11:48:07 -07:00
..
atm Merge branch 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq 2012-10-02 09:54:49 -07:00
c67x00 usb: convert drivers/usb/* to use module_platform_driver() 2011-11-28 06:48:32 +09:00
chipidea USB: chipidea: re-order irq handling to avoid unhandled irqs 2012-09-12 11:20:38 -07:00
class USB merge for 3.7-rc1 2012-10-01 13:23:01 -07:00
core usb: Don't enable LPM if the exit latency is zero. 2012-10-08 11:48:07 -07:00
dwc3 usb: xceiv: patches for v3.7 merge window 2012-09-20 20:07:19 -07:00
early USB EHCI/Xen: propagate controller reset information to hypervisor 2012-09-18 17:20:48 +01:00
gadget Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs 2012-10-02 20:25:04 -07:00
host Merge branch 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq 2012-10-02 09:54:49 -07:00
image USB: mdc800.c: remove dbg() usage 2012-05-01 21:33:50 -07:00
misc USB: ezusb: move ezusb.c from drivers/usb/serial to drivers/usb/misc 2012-09-26 14:20:28 -07:00
mon usb: Add export.h for EXPORT_SYMBOL/THIS_MODULE where needed 2011-10-31 19:31:25 -04:00
musb ARM: soc: multiplatform enablement 2012-10-01 19:11:38 -07:00
otg Merge branch 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq 2012-10-02 09:54:49 -07:00
phy ARM: tegra: remove useless includes of <mach/*.h> 2012-09-14 11:35:36 -06:00
renesas_usbhs usb: renesas_usbhs: convert to devm_xxx() 2012-09-11 13:57:18 -07:00
serial USB merge for 3.7-rc1 2012-10-01 13:23:01 -07:00
storage USB: uas: fix gcc warning 2012-09-26 14:13:19 -07:00
wusbcore USB: remove CONFIG_EXPERIMENTAL dependancies 2012-09-17 23:00:15 -07:00
Kconfig ARM: soc: general cleanups 2012-10-01 18:19:05 -07:00
Makefile usb: phy: Fix Kconfig dependency for Phy drivers 2012-06-26 16:14:33 -07:00
README
usb-common.c usb: Provide usb_speed_string() function 2011-09-18 01:29:04 -07:00
usb-skeleton.c USB: usb-skeleton.c: remove err() usage 2012-04-27 11:24:45 -07:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.