linux/drivers/net/wireless/ath/ath9k
Luciano Coelho aecdc89fb4 ath9k/ath10k: remove unnecessary channel_switch_beacon callbacks
The channel_switch_beacon callback is optional, so it doesn't have to
be defined if it's not going to do anything useful with it.  Both
ath9k and ath10k define the callback and just returns.  This commit
removes them.

Cc: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-05-23 11:31:45 +03:00
..
ahb.c ath9k: fix race in setting ATH_OP_INVALID 2014-04-24 21:46:22 -04:00
ani.c ath9k_hw: do not lower ANI setting below default on AR913x 2014-04-30 11:39:54 -04:00
ani.h ath9k_hw: tweak noise immunity thresholds for older chipsets 2014-03-03 15:35:55 -05:00
antenna.c ath9k: add support for reporting per-chain signal strength 2013-12-18 15:23:19 -05:00
ar953x_initvals.h ath9k_hw: fix worse EVM for 11b rates 2014-04-30 12:13:16 -04:00
ar955x_1p0_initvals.h ath9k: Remove AR955x INI duplicates 2013-12-09 15:37:57 -05:00
ar5008_initvals.h
ar5008_phy.c ath9k_hw: reduce ANI firstep range for older chips 2014-04-09 13:55:55 -04:00
ar9001_initvals.h
ar9002_calib.c
ar9002_hw.c ath9k: Register supported HW hang checks 2014-01-03 15:36:57 -05:00
ar9002_initvals.h
ar9002_mac.c Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless 2014-01-06 14:08:41 -05:00
ar9002_phy.c ath9k_hw: simplify spur channel handling 2013-12-18 15:23:27 -05:00
ar9002_phy.h
ar9003_2p2_initvals.h ath9k_hw: update ar9300 initvals 2014-04-30 12:13:15 -04:00
ar9003_buffalo_initvals.h ath9k: Use a separate TX gain table for WZR-HP-G450H 2013-12-09 15:37:58 -05:00
ar9003_calib.c ath9k: Calculate IQ-CAL median 2014-02-12 15:36:08 -05:00
ar9003_eeprom.c ath9k: Fix temperature compensation 2014-03-17 13:44:16 -04:00
ar9003_eeprom.h ath9k: Update BaseExtension_1 eeprom structure 2013-12-18 15:23:44 -05:00
ar9003_hw.c ath9k: Initialize QCA953x INI arrays 2014-01-03 15:37:00 -05:00
ar9003_mac.c ath9k: move ath9k_debug_sync_cause out of ath9k_hw 2013-12-19 14:41:56 -05:00
ar9003_mac.h
ar9003_mci.c
ar9003_mci.h
ar9003_paprd.c
ar9003_phy.c ath9k: do not set half/quarter channel flags in AR_PHY_MODE 2014-02-24 15:38:38 -05:00
ar9003_phy.h ath9k: Fix regulatory compliance 2014-01-03 15:37:01 -05:00
ar9003_rtt.c
ar9003_rtt.h
ar9003_wow.c
ar9330_1p1_initvals.h ath9k_hw: update ar9300 initvals 2014-04-30 12:13:15 -04:00
ar9330_1p2_initvals.h ath9k_hw: update ar9300 initvals 2014-04-30 12:13:15 -04:00
ar9340_initvals.h ath9k_hw: fix worse EVM for 11b rates 2014-04-30 12:13:16 -04:00
ar9462_2p0_initvals.h ath9k: Fix ETSI compliance for AR9462 2.0 2014-02-20 15:53:20 -05:00
ar9462_2p1_initvals.h ath9k: Remove duplicate initvals for AR9462 v2.1 2013-12-02 14:25:02 -05:00
ar9485_initvals.h ath9k: Identify duplicate AR9485 initvals 2013-12-09 15:37:59 -05:00
ar9565_1p0_initvals.h ath9k: Identify duplicate AR9565 v1.0 initvals 2013-12-09 15:38:00 -05:00
ar9565_1p1_initvals.h ath9k: Add initvals for AR9565 1.1 2013-12-02 14:25:01 -05:00
ar9580_1p0_initvals.h ath9k_hw: update ar9300 initvals 2014-04-30 12:13:15 -04:00
ath9k.h ath9k: reorder or remove some includes 2014-05-13 15:56:39 -04:00
beacon.c ath9k: Prevent divide-by-zero upon bad beacon_interval. 2014-05-06 14:51:01 -04:00
btcoex.c ath9k_hw: clean up generic timer code 2013-12-18 15:23:22 -05:00
btcoex.h
calib.c
calib.h
common-beacon.c ath9k: move ath9k_beacon_config_ap common 2014-03-17 13:13:08 -04:00
common-beacon.h ath9k: move ath9k_beacon_config_ap common 2014-03-17 13:13:08 -04:00
common-debug.c ath9k: move phy_err to ath9k_cmn_debug_phy_err 2014-05-13 15:56:42 -04:00
common-debug.h ath9k: move phy_err to ath9k_cmn_debug_phy_err 2014-05-13 15:56:42 -04:00
common-init.c ath9k: move ath9k_reload_chainmask_settings to common 2014-02-28 14:33:16 -05:00
common-init.h ath9k: move ath9k_reload_chainmask_settings to common 2014-02-28 14:33:16 -05:00
common.c ath9k: move ath9k_rx_skb_postprocess to common.c 2014-02-12 15:36:01 -05:00
common.h ath9k-common: create common-debug and move modal_eeprom to cmn 2014-05-13 15:56:36 -04:00
debug_sta.c ath9k: remove tid->paused flag 2014-04-30 11:42:35 -04:00
debug.c ath9k: move phy_err to ath9k_cmn_debug_phy_err 2014-05-13 15:56:42 -04:00
debug.h ath9k & ath9k_htc: move ath_rx_stats to cmn 2014-05-13 15:56:40 -04:00
dfs_debug.c
dfs_debug.h ath9k: non-functional: calculate DFS pulse interval per-wiphy 2014-05-13 15:56:34 -04:00
dfs.c ath9k: non-functional: calculate DFS pulse interval per-wiphy 2014-05-13 15:56:34 -04:00
dfs.h
eeprom_4k.c ath9k_hw: simplify spur channel handling 2013-12-18 15:23:27 -05:00
eeprom_9287.c ath9k_hw: simplify spur channel handling 2013-12-18 15:23:27 -05:00
eeprom_def.c ath9k_hw: simplify spur channel handling 2013-12-18 15:23:27 -05:00
eeprom.c
eeprom.h
gpio.c ath9k_hw: clean up generic timer code 2013-12-18 15:23:22 -05:00
hif_usb.c ath9k_htc: Add device ID for Buffalo WLI-UV-AG300P 2014-02-12 15:36:04 -05:00
hif_usb.h
htc_drv_beacon.c ath9k_htc: move DEFAULT_SWBA_RESPONSE check to ath9k_htc_beacon_init 2014-03-17 13:13:09 -04:00
htc_drv_debug.c ath9k_htc: use ath9k_cmn_debug_phy_err 2014-05-13 15:56:43 -04:00
htc_drv_gpio.c ath9k_htc: reconfigure led_gpios after resume 2013-12-18 15:23:02 -05:00
htc_drv_init.c ath9k_htc: sync beacon slot code with ath9k 2014-03-17 13:13:06 -04:00
htc_drv_main.c ath9k_htc: sync beacon slot code with ath9k 2014-03-17 13:13:06 -04:00
htc_drv_txrx.c ath9k & ath9k_htc: move ath_rx_stats to cmn 2014-05-13 15:56:40 -04:00
htc_hst.c ath9k_htc: catch fw panic pattern 2014-02-12 15:36:03 -05:00
htc_hst.h ath9k_htc: catch fw panic pattern 2014-02-12 15:36:03 -05:00
htc.h ath9k & ath9k_htc: move ath_rx_stats to cmn 2014-05-13 15:56:40 -04:00
hw-ops.h ath9k: Move private HW callbacks to hw-ops.h 2014-01-03 15:36:58 -05:00
hw.c ath9k: reorder or remove some includes 2014-05-13 15:56:39 -04:00
hw.h ath9k: Fix RX interrupt mitigation 2014-01-23 14:02:45 -05:00
init.c Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless 2014-05-13 15:27:44 -04:00
Kconfig ath9k: Remove ath9k rate control 2014-02-12 15:36:04 -05:00
link.c ath9k: move sc_flags to ath_common 2014-03-17 13:13:06 -04:00
mac.c ath9k: Disable AR_INTR_SYNC_HOST1_FATAL for QCA953x 2014-03-17 13:44:15 -04:00
mac.h ath9k_htc: use ath9k_cmn_process_rssi 2014-02-12 15:35:59 -05:00
main.c ath9k/ath10k: remove unnecessary channel_switch_beacon callbacks 2014-05-23 11:31:45 +03:00
Makefile ath9k-common: create common-debug and move modal_eeprom to cmn 2014-05-13 15:56:36 -04:00
mci.c ath9k: move sc_flags to ath_common 2014-03-17 13:13:06 -04:00
mci.h
pci.c amend "ath9k: Allow platform override without EEPROM override" 2014-05-13 15:56:33 -04:00
phy.h
recv.c Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless 2014-05-13 15:27:44 -04:00
reg.h ath9k: Add version/revision macros for QCA9531 2014-01-03 15:37:00 -05:00
spectral.c ath9k: fix sparse non static symbol warning 2014-01-03 15:36:56 -05:00
spectral.h ath9k: Cleanup spectral scan code 2013-12-18 15:23:37 -05:00
tx99.c ath9k: move sc_flags to ath_common 2014-03-17 13:13:06 -04:00
wmi.c
wmi.h
wow.c ath9k: move sc_flags to ath_common 2014-03-17 13:13:06 -04:00
xmit.c ath9k: remove tid->paused flag 2014-04-30 11:42:35 -04:00