forked from Minki/linux
97800cf8b6
The at24 driver allows to register I2C EEPROM chips using different vendor and devices, but the I2C subsystem does not take the vendor into account when matching using the I2C table since it only has device entries. But when matching using an OF table, both the vendor and device has to be taken into account so the driver defines only a set of compatible strings using the "atmel" vendor as a generic fallback for compatible I2C devices. So add this generic fallback to the device node compatible string to make the device to match the driver using the OF device ID table. Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
393 lines
7.3 KiB
Plaintext
393 lines
7.3 KiB
Plaintext
/*
|
|
* Device Tree file for the Turris Omnia
|
|
*
|
|
* Copyright (C) 2016 Uwe Kleine-König <uwe@kleine-koenig.org>
|
|
* Copyright (C) 2016 Tomas Hlavacek <tmshlvkc@gmail.com>
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without
|
|
* any warranty of any kind, whether express or implied.
|
|
*
|
|
* Or, alternatively,
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
/*
|
|
* Schematic available at https://www.turris.cz/doc/_media/rtrom01-schema.pdf
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include "armada-385.dtsi"
|
|
|
|
/ {
|
|
model = "Turris Omnia";
|
|
compatible = "cznic,turris-omnia", "marvell,armada385", "marvell,armada380";
|
|
|
|
chosen {
|
|
stdout-path = &uart0;
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x40000000>; /* 1024 MB */
|
|
};
|
|
|
|
soc {
|
|
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
|
|
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
|
|
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
|
|
MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
|
|
|
|
internal-regs {
|
|
|
|
/* USB part of the PCIe2/USB 2.0 port */
|
|
usb@58000 {
|
|
status = "okay";
|
|
};
|
|
|
|
sata@a8000 {
|
|
status = "okay";
|
|
};
|
|
|
|
sdhci@d8000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdhci_pins>;
|
|
status = "okay";
|
|
|
|
bus-width = <8>;
|
|
no-1-8-v;
|
|
non-removable;
|
|
};
|
|
|
|
usb3@f0000 {
|
|
status = "okay";
|
|
};
|
|
|
|
usb3@f8000 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
pcie-controller {
|
|
status = "okay";
|
|
|
|
pcie@1,0 {
|
|
/* Port 0, Lane 0 */
|
|
status = "okay";
|
|
};
|
|
|
|
pcie@2,0 {
|
|
/* Port 1, Lane 0 */
|
|
status = "okay";
|
|
};
|
|
|
|
pcie@3,0 {
|
|
/* Port 2, Lane 0 */
|
|
status = "okay";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
/* Connected to 88E6176 switch, port 6 */
|
|
ð0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ge0_rgmii_pins>;
|
|
status = "okay";
|
|
phy-mode = "rgmii";
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
/* Connected to 88E6176 switch, port 5 */
|
|
ð1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ge1_rgmii_pins>;
|
|
status = "okay";
|
|
phy-mode = "rgmii";
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
/* WAN port */
|
|
ð2 {
|
|
status = "okay";
|
|
phy-mode = "sgmii";
|
|
phy = <&phy1>;
|
|
};
|
|
|
|
&i2c0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_pins>;
|
|
status = "okay";
|
|
|
|
i2cmux@70 {
|
|
compatible = "nxp,pca9547";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x70>;
|
|
status = "okay";
|
|
|
|
i2c@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
|
|
/* STM32F0 command interface at address 0x2a */
|
|
/* leds device (in STM32F0) at address 0x2b */
|
|
|
|
eeprom@54 {
|
|
compatible = "atmel,24c64";
|
|
reg = <0x54>;
|
|
|
|
/* The EEPROM contains data for bootloader.
|
|
* Contents:
|
|
* struct omnia_eeprom {
|
|
* u32 magic; (=0x0341a034 in LE)
|
|
* u32 ramsize; (in GiB)
|
|
* char regdomain[4];
|
|
* u32 crc32;
|
|
* };
|
|
*/
|
|
};
|
|
};
|
|
|
|
i2c@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <1>;
|
|
|
|
/* routed to PCIe0/mSATA connector (CN7A) */
|
|
};
|
|
|
|
i2c@2 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <2>;
|
|
|
|
/* routed to PCIe1/USB2 connector (CN61A) */
|
|
};
|
|
|
|
i2c@3 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <3>;
|
|
|
|
/* routed to PCIe2 connector (CN62A) */
|
|
};
|
|
|
|
i2c@4 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <4>;
|
|
|
|
/* routed to SFP+ */
|
|
};
|
|
|
|
i2c@5 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <5>;
|
|
|
|
/* ATSHA204A at address 0x64 */
|
|
};
|
|
|
|
i2c@6 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <6>;
|
|
|
|
/* exposed on pin header */
|
|
};
|
|
|
|
i2c@7 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <7>;
|
|
|
|
pcawan: gpio@71 {
|
|
/*
|
|
* GPIO expander for SFP+ signals and
|
|
* and phy irq
|
|
*/
|
|
compatible = "nxp,pca9538";
|
|
reg = <0x71>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcawan_pins>;
|
|
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&mdio {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mdio_pins>;
|
|
status = "okay";
|
|
|
|
phy1: phy@1 {
|
|
status = "okay";
|
|
compatible = "ethernet-phy-id0141.0DD1", "ethernet-phy-ieee802.3-c22";
|
|
reg = <1>;
|
|
|
|
/* irq is connected to &pcawan pin 7 */
|
|
};
|
|
|
|
/* Switch MV88E6176 at address 0x10 */
|
|
switch@10 {
|
|
compatible = "marvell,mv88e6085";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
dsa,member = <0 0>;
|
|
|
|
reg = <0x10>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ports@0 {
|
|
reg = <0>;
|
|
label = "lan0";
|
|
};
|
|
|
|
ports@1 {
|
|
reg = <1>;
|
|
label = "lan1";
|
|
};
|
|
|
|
ports@2 {
|
|
reg = <2>;
|
|
label = "lan2";
|
|
};
|
|
|
|
ports@3 {
|
|
reg = <3>;
|
|
label = "lan3";
|
|
};
|
|
|
|
ports@4 {
|
|
reg = <4>;
|
|
label = "lan4";
|
|
};
|
|
|
|
ports@5 {
|
|
reg = <5>;
|
|
label = "cpu";
|
|
ethernet = <ð1>;
|
|
phy-mode = "rgmii-id";
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
/* port 6 is connected to eth0 */
|
|
};
|
|
};
|
|
};
|
|
|
|
&pinctrl {
|
|
pcawan_pins: pcawan-pins {
|
|
marvell,pins = "mpp46";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
spi0cs0_pins: spi0cs0-pins {
|
|
marvell,pins = "mpp25";
|
|
marvell,function = "spi0";
|
|
};
|
|
|
|
spi0cs1_pins: spi0cs1-pins {
|
|
marvell,pins = "mpp26";
|
|
marvell,function = "spi0";
|
|
};
|
|
};
|
|
|
|
&spi0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi0_pins &spi0cs0_pins>;
|
|
status = "okay";
|
|
|
|
spi-nor@0 {
|
|
compatible = "spansion,s25fl164k", "jedec,spi-nor";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0>;
|
|
spi-max-frequency = <40000000>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
reg = <0x0 0x00100000>;
|
|
label = "U-Boot";
|
|
};
|
|
|
|
partition@100000 {
|
|
reg = <0x00100000 0x00700000>;
|
|
label = "Rescue system";
|
|
};
|
|
};
|
|
};
|
|
|
|
/* MISO, MOSI, SCLK and CS1 are routed to pin header CN11 */
|
|
};
|
|
|
|
&uart0 {
|
|
/* Pin header CN10 */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 {
|
|
/* Pin header CN11 */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart1_pins>;
|
|
status = "okay";
|
|
};
|