forked from Minki/linux
a0c683d734
The audio-graph-card should be able to support widgets and routing in the same way as what simple-audio-card does. The patch adds the properties into audio-graph-card bindings. Then an optional property 'pa-gpios' for controlling external amplifier, which depends on DAPM widgets and routing, is added. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
130 lines
2.0 KiB
Plaintext
130 lines
2.0 KiB
Plaintext
Audio Graph Card:
|
|
|
|
Audio Graph Card specifies audio DAI connections of SoC <-> codec.
|
|
It is based on common bindings for device graphs.
|
|
see ${LINUX}/Documentation/devicetree/bindings/graph.txt
|
|
|
|
Basically, Audio Graph Card property is same as Simple Card.
|
|
see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.txt
|
|
|
|
Below are same as Simple-Card.
|
|
|
|
- label
|
|
- widgets
|
|
- routing
|
|
- dai-format
|
|
- frame-master
|
|
- bitclock-master
|
|
- bitclock-inversion
|
|
- frame-inversion
|
|
- dai-tdm-slot-num
|
|
- dai-tdm-slot-width
|
|
- clocks / system-clock-frequency
|
|
|
|
Required properties:
|
|
|
|
- compatible : "audio-graph-card";
|
|
- dais : list of CPU DAI port{s}
|
|
|
|
Optional properties:
|
|
- pa-gpios: GPIO used to control external amplifier.
|
|
|
|
Example: Single DAI case
|
|
|
|
sound_card {
|
|
compatible = "audio-graph-card";
|
|
|
|
dais = <&cpu_port>;
|
|
};
|
|
|
|
dai-controller {
|
|
...
|
|
cpu_port: port {
|
|
cpu_endpoint: endpoint {
|
|
remote-endpoint = <&codec_endpoint>;
|
|
|
|
dai-format = "left_j";
|
|
...
|
|
};
|
|
};
|
|
};
|
|
|
|
audio-codec {
|
|
...
|
|
port {
|
|
codec_endpoint: endpoint {
|
|
remote-endpoint = <&cpu_endpoint>;
|
|
};
|
|
};
|
|
};
|
|
|
|
Example: Multi DAI case
|
|
|
|
sound-card {
|
|
compatible = "audio-graph-card";
|
|
|
|
label = "sound-card";
|
|
|
|
dais = <&cpu_port0
|
|
&cpu_port1
|
|
&cpu_port2>;
|
|
};
|
|
|
|
audio-codec@0 {
|
|
...
|
|
port {
|
|
codec0_endpoint: endpoint {
|
|
remote-endpoint = <&cpu_endpoint0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
audio-codec@1 {
|
|
...
|
|
port {
|
|
codec1_endpoint: endpoint {
|
|
remote-endpoint = <&cpu_endpoint1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
audio-codec@2 {
|
|
...
|
|
port {
|
|
codec2_endpoint: endpoint {
|
|
remote-endpoint = <&cpu_endpoint2>;
|
|
};
|
|
};
|
|
};
|
|
|
|
dai-controller {
|
|
...
|
|
ports {
|
|
cpu_port0: port@0 {
|
|
cpu_endpoint0: endpoint {
|
|
remote-endpoint = <&codec0_endpoint>;
|
|
|
|
dai-format = "left_j";
|
|
...
|
|
};
|
|
};
|
|
cpu_port1: port@1 {
|
|
cpu_endpoint1: endpoint {
|
|
remote-endpoint = <&codec1_endpoint>;
|
|
|
|
dai-format = "i2s";
|
|
...
|
|
};
|
|
};
|
|
cpu_port2: port@2 {
|
|
cpu_endpoint2: endpoint {
|
|
remote-endpoint = <&codec2_endpoint>;
|
|
|
|
dai-format = "i2s";
|
|
...
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|