forked from Minki/linux
e8635b484f
This patch adds support for PCI and PCIe to the base Cavium OCTEON processor support. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
138 lines
4.8 KiB
C
138 lines
4.8 KiB
C
/*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file "COPYING" in the main directory of this archive
|
|
* for more details.
|
|
*
|
|
* Copyright (C) 2005-2007 Cavium Networks
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/time.h>
|
|
#include <linux/delay.h>
|
|
#include "pci-common.h"
|
|
|
|
typeof(pcibios_map_irq) *octeon_pcibios_map_irq;
|
|
enum octeon_dma_bar_type octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_INVALID;
|
|
|
|
/**
|
|
* Map a PCI device to the appropriate interrupt line
|
|
*
|
|
* @param dev The Linux PCI device structure for the device to map
|
|
* @param slot The slot number for this device on __BUS 0__. Linux
|
|
* enumerates through all the bridges and figures out the
|
|
* slot on Bus 0 where this device eventually hooks to.
|
|
* @param pin The PCI interrupt pin read from the device, then swizzled
|
|
* as it goes through each bridge.
|
|
* @return Interrupt number for the device
|
|
*/
|
|
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
|
|
{
|
|
if (octeon_pcibios_map_irq)
|
|
return octeon_pcibios_map_irq(dev, slot, pin);
|
|
else
|
|
panic("octeon_pcibios_map_irq doesn't point to a "
|
|
"pcibios_map_irq() function");
|
|
}
|
|
|
|
|
|
/**
|
|
* Called to perform platform specific PCI setup
|
|
*
|
|
* @param dev
|
|
* @return
|
|
*/
|
|
int pcibios_plat_dev_init(struct pci_dev *dev)
|
|
{
|
|
uint16_t config;
|
|
uint32_t dconfig;
|
|
int pos;
|
|
/*
|
|
* Force the Cache line setting to 64 bytes. The standard
|
|
* Linux bus scan doesn't seem to set it. Octeon really has
|
|
* 128 byte lines, but Intel bridges get really upset if you
|
|
* try and set values above 64 bytes. Value is specified in
|
|
* 32bit words.
|
|
*/
|
|
pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 64 / 4);
|
|
/* Set latency timers for all devices */
|
|
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 48);
|
|
|
|
/* Enable reporting System errors and parity errors on all devices */
|
|
/* Enable parity checking and error reporting */
|
|
pci_read_config_word(dev, PCI_COMMAND, &config);
|
|
config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
|
|
pci_write_config_word(dev, PCI_COMMAND, config);
|
|
|
|
if (dev->subordinate) {
|
|
/* Set latency timers on sub bridges */
|
|
pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 48);
|
|
/* More bridge error detection */
|
|
pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config);
|
|
config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR;
|
|
pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config);
|
|
}
|
|
|
|
/* Enable the PCIe normal error reporting */
|
|
pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
|
|
if (pos) {
|
|
/* Update Device Control */
|
|
pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config);
|
|
/* Correctable Error Reporting */
|
|
config |= PCI_EXP_DEVCTL_CERE;
|
|
/* Non-Fatal Error Reporting */
|
|
config |= PCI_EXP_DEVCTL_NFERE;
|
|
/* Fatal Error Reporting */
|
|
config |= PCI_EXP_DEVCTL_FERE;
|
|
/* Unsupported Request */
|
|
config |= PCI_EXP_DEVCTL_URRE;
|
|
pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config);
|
|
}
|
|
|
|
/* Find the Advanced Error Reporting capability */
|
|
pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
|
|
if (pos) {
|
|
/* Clear Uncorrectable Error Status */
|
|
pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS,
|
|
&dconfig);
|
|
pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS,
|
|
dconfig);
|
|
/* Enable reporting of all uncorrectable errors */
|
|
/* Uncorrectable Error Mask - turned on bits disable errors */
|
|
pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0);
|
|
/*
|
|
* Leave severity at HW default. This only controls if
|
|
* errors are reported as uncorrectable or
|
|
* correctable, not if the error is reported.
|
|
*/
|
|
/* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */
|
|
/* Clear Correctable Error Status */
|
|
pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig);
|
|
pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig);
|
|
/* Enable reporting of all correctable errors */
|
|
/* Correctable Error Mask - turned on bits disable errors */
|
|
pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0);
|
|
/* Advanced Error Capabilities */
|
|
pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig);
|
|
/* ECRC Generation Enable */
|
|
if (config & PCI_ERR_CAP_ECRC_GENC)
|
|
config |= PCI_ERR_CAP_ECRC_GENE;
|
|
/* ECRC Check Enable */
|
|
if (config & PCI_ERR_CAP_ECRC_CHKC)
|
|
config |= PCI_ERR_CAP_ECRC_CHKE;
|
|
pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig);
|
|
/* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */
|
|
/* Report all errors to the root complex */
|
|
pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND,
|
|
PCI_ERR_ROOT_CMD_COR_EN |
|
|
PCI_ERR_ROOT_CMD_NONFATAL_EN |
|
|
PCI_ERR_ROOT_CMD_FATAL_EN);
|
|
/* Clear the Root status register */
|
|
pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig);
|
|
pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig);
|
|
}
|
|
|
|
return 0;
|
|
}
|