forked from Minki/linux
2f8c4a8a9d
The connector drivers need a handle to the source they are connected to in order to control the source. All drivers get that handle at probe time, resulting in probe deferral when the source hasn't been probed yet. However they don't need the handle until their connect handler is called. Move retrieval of the source handle to the connect handler to avoid probe deferrals. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
646 lines
14 KiB
C
646 lines
14 KiB
C
/*
|
|
* TPO TD043MTEA1 Panel driver
|
|
*
|
|
* Author: Gražvydas Ignotas <notasas@gmail.com>
|
|
* Converted to new DSS device model: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/err.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/of_gpio.h>
|
|
|
|
#include "../dss/omapdss.h"
|
|
|
|
#define TPO_R02_MODE(x) ((x) & 7)
|
|
#define TPO_R02_MODE_800x480 7
|
|
#define TPO_R02_NCLK_RISING BIT(3)
|
|
#define TPO_R02_HSYNC_HIGH BIT(4)
|
|
#define TPO_R02_VSYNC_HIGH BIT(5)
|
|
|
|
#define TPO_R03_NSTANDBY BIT(0)
|
|
#define TPO_R03_EN_CP_CLK BIT(1)
|
|
#define TPO_R03_EN_VGL_PUMP BIT(2)
|
|
#define TPO_R03_EN_PWM BIT(3)
|
|
#define TPO_R03_DRIVING_CAP_100 BIT(4)
|
|
#define TPO_R03_EN_PRE_CHARGE BIT(6)
|
|
#define TPO_R03_SOFTWARE_CTL BIT(7)
|
|
|
|
#define TPO_R04_NFLIP_H BIT(0)
|
|
#define TPO_R04_NFLIP_V BIT(1)
|
|
#define TPO_R04_CP_CLK_FREQ_1H BIT(2)
|
|
#define TPO_R04_VGL_FREQ_1H BIT(4)
|
|
|
|
#define TPO_R03_VAL_NORMAL (TPO_R03_NSTANDBY | TPO_R03_EN_CP_CLK | \
|
|
TPO_R03_EN_VGL_PUMP | TPO_R03_EN_PWM | \
|
|
TPO_R03_DRIVING_CAP_100 | TPO_R03_EN_PRE_CHARGE | \
|
|
TPO_R03_SOFTWARE_CTL)
|
|
|
|
#define TPO_R03_VAL_STANDBY (TPO_R03_DRIVING_CAP_100 | \
|
|
TPO_R03_EN_PRE_CHARGE | TPO_R03_SOFTWARE_CTL)
|
|
|
|
static const u16 tpo_td043_def_gamma[12] = {
|
|
105, 315, 381, 431, 490, 537, 579, 686, 780, 837, 880, 1023
|
|
};
|
|
|
|
struct panel_drv_data {
|
|
struct omap_dss_device dssdev;
|
|
struct omap_dss_device *in;
|
|
|
|
struct videomode vm;
|
|
|
|
struct spi_device *spi;
|
|
struct regulator *vcc_reg;
|
|
int nreset_gpio;
|
|
u16 gamma[12];
|
|
u32 mode;
|
|
u32 hmirror:1;
|
|
u32 vmirror:1;
|
|
u32 powered_on:1;
|
|
u32 spi_suspended:1;
|
|
u32 power_on_resume:1;
|
|
};
|
|
|
|
static const struct videomode tpo_td043_vm = {
|
|
.hactive = 800,
|
|
.vactive = 480,
|
|
|
|
.pixelclock = 36000000,
|
|
|
|
.hsync_len = 1,
|
|
.hfront_porch = 68,
|
|
.hback_porch = 214,
|
|
|
|
.vsync_len = 1,
|
|
.vfront_porch = 39,
|
|
.vback_porch = 34,
|
|
|
|
.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
|
|
DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_SYNC_POSEDGE |
|
|
DISPLAY_FLAGS_PIXDATA_NEGEDGE,
|
|
/*
|
|
* Note: According to the panel documentation:
|
|
* SYNC needs to be driven on the FALLING edge
|
|
*/
|
|
};
|
|
|
|
#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
|
|
|
|
static int tpo_td043_write(struct spi_device *spi, u8 addr, u8 data)
|
|
{
|
|
struct spi_message m;
|
|
struct spi_transfer xfer;
|
|
u16 w;
|
|
int r;
|
|
|
|
spi_message_init(&m);
|
|
|
|
memset(&xfer, 0, sizeof(xfer));
|
|
|
|
w = ((u16)addr << 10) | (1 << 8) | data;
|
|
xfer.tx_buf = &w;
|
|
xfer.bits_per_word = 16;
|
|
xfer.len = 2;
|
|
spi_message_add_tail(&xfer, &m);
|
|
|
|
r = spi_sync(spi, &m);
|
|
if (r < 0)
|
|
dev_warn(&spi->dev, "failed to write to LCD reg (%d)\n", r);
|
|
return r;
|
|
}
|
|
|
|
static void tpo_td043_write_gamma(struct spi_device *spi, u16 gamma[12])
|
|
{
|
|
u8 i, val;
|
|
|
|
/* gamma bits [9:8] */
|
|
for (val = i = 0; i < 4; i++)
|
|
val |= (gamma[i] & 0x300) >> ((i + 1) * 2);
|
|
tpo_td043_write(spi, 0x11, val);
|
|
|
|
for (val = i = 0; i < 4; i++)
|
|
val |= (gamma[i+4] & 0x300) >> ((i + 1) * 2);
|
|
tpo_td043_write(spi, 0x12, val);
|
|
|
|
for (val = i = 0; i < 4; i++)
|
|
val |= (gamma[i+8] & 0x300) >> ((i + 1) * 2);
|
|
tpo_td043_write(spi, 0x13, val);
|
|
|
|
/* gamma bits [7:0] */
|
|
for (val = i = 0; i < 12; i++)
|
|
tpo_td043_write(spi, 0x14 + i, gamma[i] & 0xff);
|
|
}
|
|
|
|
static int tpo_td043_write_mirror(struct spi_device *spi, bool h, bool v)
|
|
{
|
|
u8 reg4 = TPO_R04_NFLIP_H | TPO_R04_NFLIP_V |
|
|
TPO_R04_CP_CLK_FREQ_1H | TPO_R04_VGL_FREQ_1H;
|
|
if (h)
|
|
reg4 &= ~TPO_R04_NFLIP_H;
|
|
if (v)
|
|
reg4 &= ~TPO_R04_NFLIP_V;
|
|
|
|
return tpo_td043_write(spi, 4, reg4);
|
|
}
|
|
|
|
static int tpo_td043_set_hmirror(struct omap_dss_device *dssdev, bool enable)
|
|
{
|
|
struct panel_drv_data *ddata = dev_get_drvdata(dssdev->dev);
|
|
|
|
ddata->hmirror = enable;
|
|
return tpo_td043_write_mirror(ddata->spi, ddata->hmirror,
|
|
ddata->vmirror);
|
|
}
|
|
|
|
static bool tpo_td043_get_hmirror(struct omap_dss_device *dssdev)
|
|
{
|
|
struct panel_drv_data *ddata = dev_get_drvdata(dssdev->dev);
|
|
|
|
return ddata->hmirror;
|
|
}
|
|
|
|
static ssize_t tpo_td043_vmirror_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct panel_drv_data *ddata = dev_get_drvdata(dev);
|
|
|
|
return snprintf(buf, PAGE_SIZE, "%d\n", ddata->vmirror);
|
|
}
|
|
|
|
static ssize_t tpo_td043_vmirror_store(struct device *dev,
|
|
struct device_attribute *attr, const char *buf, size_t count)
|
|
{
|
|
struct panel_drv_data *ddata = dev_get_drvdata(dev);
|
|
int val;
|
|
int ret;
|
|
|
|
ret = kstrtoint(buf, 0, &val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
val = !!val;
|
|
|
|
ret = tpo_td043_write_mirror(ddata->spi, ddata->hmirror, val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ddata->vmirror = val;
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t tpo_td043_mode_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct panel_drv_data *ddata = dev_get_drvdata(dev);
|
|
|
|
return snprintf(buf, PAGE_SIZE, "%d\n", ddata->mode);
|
|
}
|
|
|
|
static ssize_t tpo_td043_mode_store(struct device *dev,
|
|
struct device_attribute *attr, const char *buf, size_t count)
|
|
{
|
|
struct panel_drv_data *ddata = dev_get_drvdata(dev);
|
|
long val;
|
|
int ret;
|
|
|
|
ret = kstrtol(buf, 0, &val);
|
|
if (ret != 0 || val & ~7)
|
|
return -EINVAL;
|
|
|
|
ddata->mode = val;
|
|
|
|
val |= TPO_R02_NCLK_RISING;
|
|
tpo_td043_write(ddata->spi, 2, val);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t tpo_td043_gamma_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct panel_drv_data *ddata = dev_get_drvdata(dev);
|
|
ssize_t len = 0;
|
|
int ret;
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ddata->gamma); i++) {
|
|
ret = snprintf(buf + len, PAGE_SIZE - len, "%u ",
|
|
ddata->gamma[i]);
|
|
if (ret < 0)
|
|
return ret;
|
|
len += ret;
|
|
}
|
|
buf[len - 1] = '\n';
|
|
|
|
return len;
|
|
}
|
|
|
|
static ssize_t tpo_td043_gamma_store(struct device *dev,
|
|
struct device_attribute *attr, const char *buf, size_t count)
|
|
{
|
|
struct panel_drv_data *ddata = dev_get_drvdata(dev);
|
|
unsigned int g[12];
|
|
int ret;
|
|
int i;
|
|
|
|
ret = sscanf(buf, "%u %u %u %u %u %u %u %u %u %u %u %u",
|
|
&g[0], &g[1], &g[2], &g[3], &g[4], &g[5],
|
|
&g[6], &g[7], &g[8], &g[9], &g[10], &g[11]);
|
|
|
|
if (ret != 12)
|
|
return -EINVAL;
|
|
|
|
for (i = 0; i < 12; i++)
|
|
ddata->gamma[i] = g[i];
|
|
|
|
tpo_td043_write_gamma(ddata->spi, ddata->gamma);
|
|
|
|
return count;
|
|
}
|
|
|
|
static DEVICE_ATTR(vmirror, S_IRUGO | S_IWUSR,
|
|
tpo_td043_vmirror_show, tpo_td043_vmirror_store);
|
|
static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR,
|
|
tpo_td043_mode_show, tpo_td043_mode_store);
|
|
static DEVICE_ATTR(gamma, S_IRUGO | S_IWUSR,
|
|
tpo_td043_gamma_show, tpo_td043_gamma_store);
|
|
|
|
static struct attribute *tpo_td043_attrs[] = {
|
|
&dev_attr_vmirror.attr,
|
|
&dev_attr_mode.attr,
|
|
&dev_attr_gamma.attr,
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group tpo_td043_attr_group = {
|
|
.attrs = tpo_td043_attrs,
|
|
};
|
|
|
|
static int tpo_td043_power_on(struct panel_drv_data *ddata)
|
|
{
|
|
int r;
|
|
|
|
if (ddata->powered_on)
|
|
return 0;
|
|
|
|
r = regulator_enable(ddata->vcc_reg);
|
|
if (r != 0)
|
|
return r;
|
|
|
|
/* wait for panel to stabilize */
|
|
msleep(160);
|
|
|
|
if (gpio_is_valid(ddata->nreset_gpio))
|
|
gpio_set_value(ddata->nreset_gpio, 1);
|
|
|
|
tpo_td043_write(ddata->spi, 2,
|
|
TPO_R02_MODE(ddata->mode) | TPO_R02_NCLK_RISING);
|
|
tpo_td043_write(ddata->spi, 3, TPO_R03_VAL_NORMAL);
|
|
tpo_td043_write(ddata->spi, 0x20, 0xf0);
|
|
tpo_td043_write(ddata->spi, 0x21, 0xf0);
|
|
tpo_td043_write_mirror(ddata->spi, ddata->hmirror,
|
|
ddata->vmirror);
|
|
tpo_td043_write_gamma(ddata->spi, ddata->gamma);
|
|
|
|
ddata->powered_on = 1;
|
|
return 0;
|
|
}
|
|
|
|
static void tpo_td043_power_off(struct panel_drv_data *ddata)
|
|
{
|
|
if (!ddata->powered_on)
|
|
return;
|
|
|
|
tpo_td043_write(ddata->spi, 3,
|
|
TPO_R03_VAL_STANDBY | TPO_R03_EN_PWM);
|
|
|
|
if (gpio_is_valid(ddata->nreset_gpio))
|
|
gpio_set_value(ddata->nreset_gpio, 0);
|
|
|
|
/* wait for at least 2 vsyncs before cutting off power */
|
|
msleep(50);
|
|
|
|
tpo_td043_write(ddata->spi, 3, TPO_R03_VAL_STANDBY);
|
|
|
|
regulator_disable(ddata->vcc_reg);
|
|
|
|
ddata->powered_on = 0;
|
|
}
|
|
|
|
static int tpo_td043_connect(struct omap_dss_device *dssdev)
|
|
{
|
|
struct panel_drv_data *ddata = to_panel_data(dssdev);
|
|
struct omap_dss_device *in;
|
|
int r;
|
|
|
|
if (omapdss_device_is_connected(dssdev))
|
|
return 0;
|
|
|
|
in = omapdss_of_find_source_for_first_ep(dssdev->dev->of_node);
|
|
if (IS_ERR(in)) {
|
|
dev_err(dssdev->dev, "failed to find video source\n");
|
|
return PTR_ERR(in);
|
|
}
|
|
|
|
r = in->ops.dpi->connect(in, dssdev);
|
|
if (r) {
|
|
omap_dss_put_device(in);
|
|
return r;
|
|
}
|
|
|
|
ddata->in = in;
|
|
return 0;
|
|
}
|
|
|
|
static void tpo_td043_disconnect(struct omap_dss_device *dssdev)
|
|
{
|
|
struct panel_drv_data *ddata = to_panel_data(dssdev);
|
|
struct omap_dss_device *in = ddata->in;
|
|
|
|
if (!omapdss_device_is_connected(dssdev))
|
|
return;
|
|
|
|
in->ops.dpi->disconnect(in, dssdev);
|
|
|
|
omap_dss_put_device(in);
|
|
ddata->in = NULL;
|
|
}
|
|
|
|
static int tpo_td043_enable(struct omap_dss_device *dssdev)
|
|
{
|
|
struct panel_drv_data *ddata = to_panel_data(dssdev);
|
|
struct omap_dss_device *in = ddata->in;
|
|
int r;
|
|
|
|
if (!omapdss_device_is_connected(dssdev))
|
|
return -ENODEV;
|
|
|
|
if (omapdss_device_is_enabled(dssdev))
|
|
return 0;
|
|
|
|
in->ops.dpi->set_timings(in, &ddata->vm);
|
|
|
|
r = in->ops.dpi->enable(in);
|
|
if (r)
|
|
return r;
|
|
|
|
/*
|
|
* If we are resuming from system suspend, SPI clocks might not be
|
|
* enabled yet, so we'll program the LCD from SPI PM resume callback.
|
|
*/
|
|
if (!ddata->spi_suspended) {
|
|
r = tpo_td043_power_on(ddata);
|
|
if (r) {
|
|
in->ops.dpi->disable(in);
|
|
return r;
|
|
}
|
|
}
|
|
|
|
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void tpo_td043_disable(struct omap_dss_device *dssdev)
|
|
{
|
|
struct panel_drv_data *ddata = to_panel_data(dssdev);
|
|
struct omap_dss_device *in = ddata->in;
|
|
|
|
if (!omapdss_device_is_enabled(dssdev))
|
|
return;
|
|
|
|
in->ops.dpi->disable(in);
|
|
|
|
if (!ddata->spi_suspended)
|
|
tpo_td043_power_off(ddata);
|
|
|
|
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
|
|
}
|
|
|
|
static void tpo_td043_set_timings(struct omap_dss_device *dssdev,
|
|
struct videomode *vm)
|
|
{
|
|
struct panel_drv_data *ddata = to_panel_data(dssdev);
|
|
struct omap_dss_device *in = ddata->in;
|
|
|
|
ddata->vm = *vm;
|
|
dssdev->panel.vm = *vm;
|
|
|
|
in->ops.dpi->set_timings(in, vm);
|
|
}
|
|
|
|
static void tpo_td043_get_timings(struct omap_dss_device *dssdev,
|
|
struct videomode *vm)
|
|
{
|
|
struct panel_drv_data *ddata = to_panel_data(dssdev);
|
|
|
|
*vm = ddata->vm;
|
|
}
|
|
|
|
static int tpo_td043_check_timings(struct omap_dss_device *dssdev,
|
|
struct videomode *vm)
|
|
{
|
|
struct panel_drv_data *ddata = to_panel_data(dssdev);
|
|
struct omap_dss_device *in = ddata->in;
|
|
|
|
return in->ops.dpi->check_timings(in, vm);
|
|
}
|
|
|
|
static struct omap_dss_driver tpo_td043_ops = {
|
|
.connect = tpo_td043_connect,
|
|
.disconnect = tpo_td043_disconnect,
|
|
|
|
.enable = tpo_td043_enable,
|
|
.disable = tpo_td043_disable,
|
|
|
|
.set_timings = tpo_td043_set_timings,
|
|
.get_timings = tpo_td043_get_timings,
|
|
.check_timings = tpo_td043_check_timings,
|
|
|
|
.set_mirror = tpo_td043_set_hmirror,
|
|
.get_mirror = tpo_td043_get_hmirror,
|
|
};
|
|
|
|
static int tpo_td043_probe_of(struct spi_device *spi)
|
|
{
|
|
struct device_node *node = spi->dev.of_node;
|
|
struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
|
|
int gpio;
|
|
|
|
gpio = of_get_named_gpio(node, "reset-gpios", 0);
|
|
if (!gpio_is_valid(gpio)) {
|
|
dev_err(&spi->dev, "failed to parse enable gpio\n");
|
|
return gpio;
|
|
}
|
|
ddata->nreset_gpio = gpio;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tpo_td043_probe(struct spi_device *spi)
|
|
{
|
|
struct panel_drv_data *ddata;
|
|
struct omap_dss_device *dssdev;
|
|
int r;
|
|
|
|
dev_dbg(&spi->dev, "%s\n", __func__);
|
|
|
|
spi->bits_per_word = 16;
|
|
spi->mode = SPI_MODE_0;
|
|
|
|
r = spi_setup(spi);
|
|
if (r < 0) {
|
|
dev_err(&spi->dev, "spi_setup failed: %d\n", r);
|
|
return r;
|
|
}
|
|
|
|
ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
|
|
if (ddata == NULL)
|
|
return -ENOMEM;
|
|
|
|
dev_set_drvdata(&spi->dev, ddata);
|
|
|
|
ddata->spi = spi;
|
|
|
|
r = tpo_td043_probe_of(spi);
|
|
if (r)
|
|
return r;
|
|
|
|
ddata->mode = TPO_R02_MODE_800x480;
|
|
memcpy(ddata->gamma, tpo_td043_def_gamma, sizeof(ddata->gamma));
|
|
|
|
ddata->vcc_reg = devm_regulator_get(&spi->dev, "vcc");
|
|
if (IS_ERR(ddata->vcc_reg)) {
|
|
dev_err(&spi->dev, "failed to get LCD VCC regulator\n");
|
|
r = PTR_ERR(ddata->vcc_reg);
|
|
goto err_regulator;
|
|
}
|
|
|
|
if (gpio_is_valid(ddata->nreset_gpio)) {
|
|
r = devm_gpio_request_one(&spi->dev,
|
|
ddata->nreset_gpio, GPIOF_OUT_INIT_LOW,
|
|
"lcd reset");
|
|
if (r < 0) {
|
|
dev_err(&spi->dev, "couldn't request reset GPIO\n");
|
|
goto err_gpio_req;
|
|
}
|
|
}
|
|
|
|
r = sysfs_create_group(&spi->dev.kobj, &tpo_td043_attr_group);
|
|
if (r) {
|
|
dev_err(&spi->dev, "failed to create sysfs files\n");
|
|
goto err_sysfs;
|
|
}
|
|
|
|
ddata->vm = tpo_td043_vm;
|
|
|
|
dssdev = &ddata->dssdev;
|
|
dssdev->dev = &spi->dev;
|
|
dssdev->driver = &tpo_td043_ops;
|
|
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
|
|
dssdev->owner = THIS_MODULE;
|
|
dssdev->panel.vm = ddata->vm;
|
|
|
|
r = omapdss_register_display(dssdev);
|
|
if (r) {
|
|
dev_err(&spi->dev, "Failed to register panel\n");
|
|
goto err_reg;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_reg:
|
|
sysfs_remove_group(&spi->dev.kobj, &tpo_td043_attr_group);
|
|
err_sysfs:
|
|
err_gpio_req:
|
|
err_regulator:
|
|
return r;
|
|
}
|
|
|
|
static int tpo_td043_remove(struct spi_device *spi)
|
|
{
|
|
struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
|
|
struct omap_dss_device *dssdev = &ddata->dssdev;
|
|
|
|
dev_dbg(&ddata->spi->dev, "%s\n", __func__);
|
|
|
|
omapdss_unregister_display(dssdev);
|
|
|
|
tpo_td043_disable(dssdev);
|
|
tpo_td043_disconnect(dssdev);
|
|
|
|
sysfs_remove_group(&spi->dev.kobj, &tpo_td043_attr_group);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int tpo_td043_spi_suspend(struct device *dev)
|
|
{
|
|
struct panel_drv_data *ddata = dev_get_drvdata(dev);
|
|
|
|
dev_dbg(dev, "tpo_td043_spi_suspend, tpo %p\n", ddata);
|
|
|
|
ddata->power_on_resume = ddata->powered_on;
|
|
tpo_td043_power_off(ddata);
|
|
ddata->spi_suspended = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tpo_td043_spi_resume(struct device *dev)
|
|
{
|
|
struct panel_drv_data *ddata = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
dev_dbg(dev, "tpo_td043_spi_resume\n");
|
|
|
|
if (ddata->power_on_resume) {
|
|
ret = tpo_td043_power_on(ddata);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
ddata->spi_suspended = 0;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(tpo_td043_spi_pm,
|
|
tpo_td043_spi_suspend, tpo_td043_spi_resume);
|
|
|
|
static const struct of_device_id tpo_td043_of_match[] = {
|
|
{ .compatible = "omapdss,tpo,td043mtea1", },
|
|
{},
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, tpo_td043_of_match);
|
|
|
|
static struct spi_driver tpo_td043_spi_driver = {
|
|
.driver = {
|
|
.name = "panel-tpo-td043mtea1",
|
|
.pm = &tpo_td043_spi_pm,
|
|
.of_match_table = tpo_td043_of_match,
|
|
.suppress_bind_attrs = true,
|
|
},
|
|
.probe = tpo_td043_probe,
|
|
.remove = tpo_td043_remove,
|
|
};
|
|
|
|
module_spi_driver(tpo_td043_spi_driver);
|
|
|
|
MODULE_ALIAS("spi:tpo,td043mtea1");
|
|
MODULE_AUTHOR("Gražvydas Ignotas <notasas@gmail.com>");
|
|
MODULE_DESCRIPTION("TPO TD043MTEA1 LCD Driver");
|
|
MODULE_LICENSE("GPL");
|