forked from Minki/linux
6505d75cd2
Change tomi.valkeinen@nokia.com to tomi.valkeinen@ti.com. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
470 lines
12 KiB
C
470 lines
12 KiB
C
/*
|
|
* Toppoly TD028TTEC1 panel support
|
|
*
|
|
* Copyright (C) 2008 Nokia Corporation
|
|
* Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
*
|
|
* Neo 1973 code (jbt6k74.c):
|
|
* Copyright (C) 2006-2007 by OpenMoko, Inc.
|
|
* Author: Harald Welte <laforge@openmoko.org>
|
|
*
|
|
* Ported and adapted from Neo 1973 U-Boot by:
|
|
* H. Nikolaus Schaller <hns@goldelico.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published by
|
|
* the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/gpio.h>
|
|
|
|
#include "../dss/omapdss.h"
|
|
|
|
struct panel_drv_data {
|
|
struct omap_dss_device dssdev;
|
|
struct omap_dss_device *in;
|
|
|
|
struct videomode vm;
|
|
|
|
struct spi_device *spi_dev;
|
|
};
|
|
|
|
static const struct videomode td028ttec1_panel_vm = {
|
|
.hactive = 480,
|
|
.vactive = 640,
|
|
.pixelclock = 22153000,
|
|
.hfront_porch = 24,
|
|
.hsync_len = 8,
|
|
.hback_porch = 8,
|
|
.vfront_porch = 4,
|
|
.vsync_len = 2,
|
|
.vback_porch = 2,
|
|
|
|
.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
|
|
DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_SYNC_POSEDGE |
|
|
DISPLAY_FLAGS_PIXDATA_NEGEDGE,
|
|
/*
|
|
* Note: According to the panel documentation:
|
|
* SYNC needs to be driven on the FALLING edge
|
|
*/
|
|
};
|
|
|
|
#define JBT_COMMAND 0x000
|
|
#define JBT_DATA 0x100
|
|
|
|
static int jbt_ret_write_0(struct panel_drv_data *ddata, u8 reg)
|
|
{
|
|
int rc;
|
|
u16 tx_buf = JBT_COMMAND | reg;
|
|
|
|
rc = spi_write(ddata->spi_dev, (u8 *)&tx_buf,
|
|
1*sizeof(u16));
|
|
if (rc != 0)
|
|
dev_err(&ddata->spi_dev->dev,
|
|
"jbt_ret_write_0 spi_write ret %d\n", rc);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int jbt_reg_write_1(struct panel_drv_data *ddata, u8 reg, u8 data)
|
|
{
|
|
int rc;
|
|
u16 tx_buf[2];
|
|
|
|
tx_buf[0] = JBT_COMMAND | reg;
|
|
tx_buf[1] = JBT_DATA | data;
|
|
rc = spi_write(ddata->spi_dev, (u8 *)tx_buf,
|
|
2*sizeof(u16));
|
|
if (rc != 0)
|
|
dev_err(&ddata->spi_dev->dev,
|
|
"jbt_reg_write_1 spi_write ret %d\n", rc);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int jbt_reg_write_2(struct panel_drv_data *ddata, u8 reg, u16 data)
|
|
{
|
|
int rc;
|
|
u16 tx_buf[3];
|
|
|
|
tx_buf[0] = JBT_COMMAND | reg;
|
|
tx_buf[1] = JBT_DATA | (data >> 8);
|
|
tx_buf[2] = JBT_DATA | (data & 0xff);
|
|
|
|
rc = spi_write(ddata->spi_dev, (u8 *)tx_buf,
|
|
3*sizeof(u16));
|
|
|
|
if (rc != 0)
|
|
dev_err(&ddata->spi_dev->dev,
|
|
"jbt_reg_write_2 spi_write ret %d\n", rc);
|
|
|
|
return rc;
|
|
}
|
|
|
|
enum jbt_register {
|
|
JBT_REG_SLEEP_IN = 0x10,
|
|
JBT_REG_SLEEP_OUT = 0x11,
|
|
|
|
JBT_REG_DISPLAY_OFF = 0x28,
|
|
JBT_REG_DISPLAY_ON = 0x29,
|
|
|
|
JBT_REG_RGB_FORMAT = 0x3a,
|
|
JBT_REG_QUAD_RATE = 0x3b,
|
|
|
|
JBT_REG_POWER_ON_OFF = 0xb0,
|
|
JBT_REG_BOOSTER_OP = 0xb1,
|
|
JBT_REG_BOOSTER_MODE = 0xb2,
|
|
JBT_REG_BOOSTER_FREQ = 0xb3,
|
|
JBT_REG_OPAMP_SYSCLK = 0xb4,
|
|
JBT_REG_VSC_VOLTAGE = 0xb5,
|
|
JBT_REG_VCOM_VOLTAGE = 0xb6,
|
|
JBT_REG_EXT_DISPL = 0xb7,
|
|
JBT_REG_OUTPUT_CONTROL = 0xb8,
|
|
JBT_REG_DCCLK_DCEV = 0xb9,
|
|
JBT_REG_DISPLAY_MODE1 = 0xba,
|
|
JBT_REG_DISPLAY_MODE2 = 0xbb,
|
|
JBT_REG_DISPLAY_MODE = 0xbc,
|
|
JBT_REG_ASW_SLEW = 0xbd,
|
|
JBT_REG_DUMMY_DISPLAY = 0xbe,
|
|
JBT_REG_DRIVE_SYSTEM = 0xbf,
|
|
|
|
JBT_REG_SLEEP_OUT_FR_A = 0xc0,
|
|
JBT_REG_SLEEP_OUT_FR_B = 0xc1,
|
|
JBT_REG_SLEEP_OUT_FR_C = 0xc2,
|
|
JBT_REG_SLEEP_IN_LCCNT_D = 0xc3,
|
|
JBT_REG_SLEEP_IN_LCCNT_E = 0xc4,
|
|
JBT_REG_SLEEP_IN_LCCNT_F = 0xc5,
|
|
JBT_REG_SLEEP_IN_LCCNT_G = 0xc6,
|
|
|
|
JBT_REG_GAMMA1_FINE_1 = 0xc7,
|
|
JBT_REG_GAMMA1_FINE_2 = 0xc8,
|
|
JBT_REG_GAMMA1_INCLINATION = 0xc9,
|
|
JBT_REG_GAMMA1_BLUE_OFFSET = 0xca,
|
|
|
|
JBT_REG_BLANK_CONTROL = 0xcf,
|
|
JBT_REG_BLANK_TH_TV = 0xd0,
|
|
JBT_REG_CKV_ON_OFF = 0xd1,
|
|
JBT_REG_CKV_1_2 = 0xd2,
|
|
JBT_REG_OEV_TIMING = 0xd3,
|
|
JBT_REG_ASW_TIMING_1 = 0xd4,
|
|
JBT_REG_ASW_TIMING_2 = 0xd5,
|
|
|
|
JBT_REG_HCLOCK_VGA = 0xec,
|
|
JBT_REG_HCLOCK_QVGA = 0xed,
|
|
};
|
|
|
|
#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
|
|
|
|
static int td028ttec1_panel_connect(struct omap_dss_device *dssdev)
|
|
{
|
|
struct panel_drv_data *ddata = to_panel_data(dssdev);
|
|
struct omap_dss_device *in;
|
|
int r;
|
|
|
|
if (omapdss_device_is_connected(dssdev))
|
|
return 0;
|
|
|
|
in = omapdss_of_find_source_for_first_ep(dssdev->dev->of_node);
|
|
if (IS_ERR(in)) {
|
|
dev_err(dssdev->dev, "failed to find video source\n");
|
|
return PTR_ERR(in);
|
|
}
|
|
|
|
r = in->ops.dpi->connect(in, dssdev);
|
|
if (r) {
|
|
omap_dss_put_device(in);
|
|
return r;
|
|
}
|
|
|
|
ddata->in = in;
|
|
return 0;
|
|
}
|
|
|
|
static void td028ttec1_panel_disconnect(struct omap_dss_device *dssdev)
|
|
{
|
|
struct panel_drv_data *ddata = to_panel_data(dssdev);
|
|
struct omap_dss_device *in = ddata->in;
|
|
|
|
if (!omapdss_device_is_connected(dssdev))
|
|
return;
|
|
|
|
in->ops.dpi->disconnect(in, dssdev);
|
|
|
|
omap_dss_put_device(in);
|
|
ddata->in = NULL;
|
|
}
|
|
|
|
static int td028ttec1_panel_enable(struct omap_dss_device *dssdev)
|
|
{
|
|
struct panel_drv_data *ddata = to_panel_data(dssdev);
|
|
struct omap_dss_device *in = ddata->in;
|
|
int r;
|
|
|
|
if (!omapdss_device_is_connected(dssdev))
|
|
return -ENODEV;
|
|
|
|
if (omapdss_device_is_enabled(dssdev))
|
|
return 0;
|
|
|
|
in->ops.dpi->set_timings(in, &ddata->vm);
|
|
|
|
r = in->ops.dpi->enable(in);
|
|
if (r)
|
|
return r;
|
|
|
|
dev_dbg(dssdev->dev, "td028ttec1_panel_enable() - state %d\n",
|
|
dssdev->state);
|
|
|
|
/* three times command zero */
|
|
r |= jbt_ret_write_0(ddata, 0x00);
|
|
usleep_range(1000, 2000);
|
|
r |= jbt_ret_write_0(ddata, 0x00);
|
|
usleep_range(1000, 2000);
|
|
r |= jbt_ret_write_0(ddata, 0x00);
|
|
usleep_range(1000, 2000);
|
|
|
|
if (r) {
|
|
dev_warn(dssdev->dev, "transfer error\n");
|
|
goto transfer_err;
|
|
}
|
|
|
|
/* deep standby out */
|
|
r |= jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x17);
|
|
|
|
/* RGB I/F on, RAM write off, QVGA through, SIGCON enable */
|
|
r |= jbt_reg_write_1(ddata, JBT_REG_DISPLAY_MODE, 0x80);
|
|
|
|
/* Quad mode off */
|
|
r |= jbt_reg_write_1(ddata, JBT_REG_QUAD_RATE, 0x00);
|
|
|
|
/* AVDD on, XVDD on */
|
|
r |= jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x16);
|
|
|
|
/* Output control */
|
|
r |= jbt_reg_write_2(ddata, JBT_REG_OUTPUT_CONTROL, 0xfff9);
|
|
|
|
/* Sleep mode off */
|
|
r |= jbt_ret_write_0(ddata, JBT_REG_SLEEP_OUT);
|
|
|
|
/* at this point we have like 50% grey */
|
|
|
|
/* initialize register set */
|
|
r |= jbt_reg_write_1(ddata, JBT_REG_DISPLAY_MODE1, 0x01);
|
|
r |= jbt_reg_write_1(ddata, JBT_REG_DISPLAY_MODE2, 0x00);
|
|
r |= jbt_reg_write_1(ddata, JBT_REG_RGB_FORMAT, 0x60);
|
|
r |= jbt_reg_write_1(ddata, JBT_REG_DRIVE_SYSTEM, 0x10);
|
|
r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_OP, 0x56);
|
|
r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_MODE, 0x33);
|
|
r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_FREQ, 0x11);
|
|
r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_FREQ, 0x11);
|
|
r |= jbt_reg_write_1(ddata, JBT_REG_OPAMP_SYSCLK, 0x02);
|
|
r |= jbt_reg_write_1(ddata, JBT_REG_VSC_VOLTAGE, 0x2b);
|
|
r |= jbt_reg_write_1(ddata, JBT_REG_VCOM_VOLTAGE, 0x40);
|
|
r |= jbt_reg_write_1(ddata, JBT_REG_EXT_DISPL, 0x03);
|
|
r |= jbt_reg_write_1(ddata, JBT_REG_DCCLK_DCEV, 0x04);
|
|
/*
|
|
* default of 0x02 in JBT_REG_ASW_SLEW responsible for 72Hz requirement
|
|
* to avoid red / blue flicker
|
|
*/
|
|
r |= jbt_reg_write_1(ddata, JBT_REG_ASW_SLEW, 0x04);
|
|
r |= jbt_reg_write_1(ddata, JBT_REG_DUMMY_DISPLAY, 0x00);
|
|
|
|
r |= jbt_reg_write_1(ddata, JBT_REG_SLEEP_OUT_FR_A, 0x11);
|
|
r |= jbt_reg_write_1(ddata, JBT_REG_SLEEP_OUT_FR_B, 0x11);
|
|
r |= jbt_reg_write_1(ddata, JBT_REG_SLEEP_OUT_FR_C, 0x11);
|
|
r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_D, 0x2040);
|
|
r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_E, 0x60c0);
|
|
r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_F, 0x1020);
|
|
r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_G, 0x60c0);
|
|
|
|
r |= jbt_reg_write_2(ddata, JBT_REG_GAMMA1_FINE_1, 0x5533);
|
|
r |= jbt_reg_write_1(ddata, JBT_REG_GAMMA1_FINE_2, 0x00);
|
|
r |= jbt_reg_write_1(ddata, JBT_REG_GAMMA1_INCLINATION, 0x00);
|
|
r |= jbt_reg_write_1(ddata, JBT_REG_GAMMA1_BLUE_OFFSET, 0x00);
|
|
|
|
r |= jbt_reg_write_2(ddata, JBT_REG_HCLOCK_VGA, 0x1f0);
|
|
r |= jbt_reg_write_1(ddata, JBT_REG_BLANK_CONTROL, 0x02);
|
|
r |= jbt_reg_write_2(ddata, JBT_REG_BLANK_TH_TV, 0x0804);
|
|
|
|
r |= jbt_reg_write_1(ddata, JBT_REG_CKV_ON_OFF, 0x01);
|
|
r |= jbt_reg_write_2(ddata, JBT_REG_CKV_1_2, 0x0000);
|
|
|
|
r |= jbt_reg_write_2(ddata, JBT_REG_OEV_TIMING, 0x0d0e);
|
|
r |= jbt_reg_write_2(ddata, JBT_REG_ASW_TIMING_1, 0x11a4);
|
|
r |= jbt_reg_write_1(ddata, JBT_REG_ASW_TIMING_2, 0x0e);
|
|
|
|
r |= jbt_ret_write_0(ddata, JBT_REG_DISPLAY_ON);
|
|
|
|
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
|
|
|
|
transfer_err:
|
|
|
|
return r ? -EIO : 0;
|
|
}
|
|
|
|
static void td028ttec1_panel_disable(struct omap_dss_device *dssdev)
|
|
{
|
|
struct panel_drv_data *ddata = to_panel_data(dssdev);
|
|
struct omap_dss_device *in = ddata->in;
|
|
|
|
if (!omapdss_device_is_enabled(dssdev))
|
|
return;
|
|
|
|
dev_dbg(dssdev->dev, "td028ttec1_panel_disable()\n");
|
|
|
|
jbt_ret_write_0(ddata, JBT_REG_DISPLAY_OFF);
|
|
jbt_reg_write_2(ddata, JBT_REG_OUTPUT_CONTROL, 0x8002);
|
|
jbt_ret_write_0(ddata, JBT_REG_SLEEP_IN);
|
|
jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x00);
|
|
|
|
in->ops.dpi->disable(in);
|
|
|
|
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
|
|
}
|
|
|
|
static void td028ttec1_panel_set_timings(struct omap_dss_device *dssdev,
|
|
struct videomode *vm)
|
|
{
|
|
struct panel_drv_data *ddata = to_panel_data(dssdev);
|
|
struct omap_dss_device *in = ddata->in;
|
|
|
|
ddata->vm = *vm;
|
|
dssdev->panel.vm = *vm;
|
|
|
|
in->ops.dpi->set_timings(in, vm);
|
|
}
|
|
|
|
static void td028ttec1_panel_get_timings(struct omap_dss_device *dssdev,
|
|
struct videomode *vm)
|
|
{
|
|
struct panel_drv_data *ddata = to_panel_data(dssdev);
|
|
|
|
*vm = ddata->vm;
|
|
}
|
|
|
|
static int td028ttec1_panel_check_timings(struct omap_dss_device *dssdev,
|
|
struct videomode *vm)
|
|
{
|
|
struct panel_drv_data *ddata = to_panel_data(dssdev);
|
|
struct omap_dss_device *in = ddata->in;
|
|
|
|
return in->ops.dpi->check_timings(in, vm);
|
|
}
|
|
|
|
static struct omap_dss_driver td028ttec1_ops = {
|
|
.connect = td028ttec1_panel_connect,
|
|
.disconnect = td028ttec1_panel_disconnect,
|
|
|
|
.enable = td028ttec1_panel_enable,
|
|
.disable = td028ttec1_panel_disable,
|
|
|
|
.set_timings = td028ttec1_panel_set_timings,
|
|
.get_timings = td028ttec1_panel_get_timings,
|
|
.check_timings = td028ttec1_panel_check_timings,
|
|
};
|
|
|
|
static int td028ttec1_panel_probe(struct spi_device *spi)
|
|
{
|
|
struct panel_drv_data *ddata;
|
|
struct omap_dss_device *dssdev;
|
|
int r;
|
|
|
|
dev_dbg(&spi->dev, "%s\n", __func__);
|
|
|
|
spi->bits_per_word = 9;
|
|
spi->mode = SPI_MODE_3;
|
|
|
|
r = spi_setup(spi);
|
|
if (r < 0) {
|
|
dev_err(&spi->dev, "spi_setup failed: %d\n", r);
|
|
return r;
|
|
}
|
|
|
|
ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
|
|
if (ddata == NULL)
|
|
return -ENOMEM;
|
|
|
|
dev_set_drvdata(&spi->dev, ddata);
|
|
|
|
ddata->spi_dev = spi;
|
|
|
|
ddata->vm = td028ttec1_panel_vm;
|
|
|
|
dssdev = &ddata->dssdev;
|
|
dssdev->dev = &spi->dev;
|
|
dssdev->driver = &td028ttec1_ops;
|
|
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
|
|
dssdev->owner = THIS_MODULE;
|
|
dssdev->panel.vm = ddata->vm;
|
|
|
|
r = omapdss_register_display(dssdev);
|
|
if (r) {
|
|
dev_err(&spi->dev, "Failed to register panel\n");
|
|
return r;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int td028ttec1_panel_remove(struct spi_device *spi)
|
|
{
|
|
struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
|
|
struct omap_dss_device *dssdev = &ddata->dssdev;
|
|
|
|
dev_dbg(&ddata->spi_dev->dev, "%s\n", __func__);
|
|
|
|
omapdss_unregister_display(dssdev);
|
|
|
|
td028ttec1_panel_disable(dssdev);
|
|
td028ttec1_panel_disconnect(dssdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id td028ttec1_of_match[] = {
|
|
{ .compatible = "omapdss,tpo,td028ttec1", },
|
|
/* keep to not break older DTB */
|
|
{ .compatible = "omapdss,toppoly,td028ttec1", },
|
|
{},
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, td028ttec1_of_match);
|
|
|
|
static const struct spi_device_id td028ttec1_ids[] = {
|
|
{ "toppoly,td028ttec1", 0 },
|
|
{ "tpo,td028ttec1", 0},
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(spi, td028ttec1_ids);
|
|
|
|
|
|
static struct spi_driver td028ttec1_spi_driver = {
|
|
.probe = td028ttec1_panel_probe,
|
|
.remove = td028ttec1_panel_remove,
|
|
.id_table = td028ttec1_ids,
|
|
|
|
.driver = {
|
|
.name = "panel-tpo-td028ttec1",
|
|
.of_match_table = td028ttec1_of_match,
|
|
.suppress_bind_attrs = true,
|
|
},
|
|
};
|
|
|
|
module_spi_driver(td028ttec1_spi_driver);
|
|
|
|
MODULE_AUTHOR("H. Nikolaus Schaller <hns@goldelico.com>");
|
|
MODULE_DESCRIPTION("Toppoly TD028TTEC1 panel driver");
|
|
MODULE_LICENSE("GPL");
|