forked from Minki/linux
834f65e18c
GPU PLL was designed with dynamic frequency switching in mind so driver can adjust rate based on the GPU load. Allow GPU clock to change parent rate (GPU PLL is the only possible parent of GPU clock). Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <mripard@kernel.org>
1259 lines
38 KiB
C
1259 lines
38 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.io>
|
|
*/
|
|
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include "ccu_common.h"
|
|
#include "ccu_reset.h"
|
|
|
|
#include "ccu_div.h"
|
|
#include "ccu_gate.h"
|
|
#include "ccu_mp.h"
|
|
#include "ccu_mult.h"
|
|
#include "ccu_nk.h"
|
|
#include "ccu_nkm.h"
|
|
#include "ccu_nkmp.h"
|
|
#include "ccu_nm.h"
|
|
|
|
#include "ccu-sun50i-h6.h"
|
|
|
|
/*
|
|
* The CPU PLL is actually NP clock, with P being /1, /2 or /4. However
|
|
* P should only be used for output frequencies lower than 288 MHz.
|
|
*
|
|
* For now we can just model it as a multiplier clock, and force P to /1.
|
|
*
|
|
* The M factor is present in the register's description, but not in the
|
|
* frequency formula, and it's documented as "M is only used for backdoor
|
|
* testing", so it's not modelled and then force to 0.
|
|
*/
|
|
#define SUN50I_H6_PLL_CPUX_REG 0x000
|
|
static struct ccu_mult pll_cpux_clk = {
|
|
.enable = BIT(31),
|
|
.lock = BIT(28),
|
|
.mult = _SUNXI_CCU_MULT_MIN(8, 8, 12),
|
|
.common = {
|
|
.reg = 0x000,
|
|
.hw.init = CLK_HW_INIT("pll-cpux", "osc24M",
|
|
&ccu_mult_ops,
|
|
CLK_SET_RATE_UNGATE),
|
|
},
|
|
};
|
|
|
|
/* Some PLLs are input * N / div1 / P. Model them as NKMP with no K */
|
|
#define SUN50I_H6_PLL_DDR0_REG 0x010
|
|
static struct ccu_nkmp pll_ddr0_clk = {
|
|
.enable = BIT(31),
|
|
.lock = BIT(28),
|
|
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
|
|
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
|
|
.p = _SUNXI_CCU_DIV(0, 1), /* output divider */
|
|
.common = {
|
|
.reg = 0x010,
|
|
.hw.init = CLK_HW_INIT("pll-ddr0", "osc24M",
|
|
&ccu_nkmp_ops,
|
|
CLK_SET_RATE_UNGATE),
|
|
},
|
|
};
|
|
|
|
#define SUN50I_H6_PLL_PERIPH0_REG 0x020
|
|
static struct ccu_nkmp pll_periph0_clk = {
|
|
.enable = BIT(31),
|
|
.lock = BIT(28),
|
|
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
|
|
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
|
|
.p = _SUNXI_CCU_DIV(0, 1), /* output divider */
|
|
.fixed_post_div = 4,
|
|
.common = {
|
|
.reg = 0x020,
|
|
.features = CCU_FEATURE_FIXED_POSTDIV,
|
|
.hw.init = CLK_HW_INIT("pll-periph0", "osc24M",
|
|
&ccu_nkmp_ops,
|
|
CLK_SET_RATE_UNGATE),
|
|
},
|
|
};
|
|
|
|
#define SUN50I_H6_PLL_PERIPH1_REG 0x028
|
|
static struct ccu_nkmp pll_periph1_clk = {
|
|
.enable = BIT(31),
|
|
.lock = BIT(28),
|
|
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
|
|
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
|
|
.p = _SUNXI_CCU_DIV(0, 1), /* output divider */
|
|
.fixed_post_div = 4,
|
|
.common = {
|
|
.reg = 0x028,
|
|
.features = CCU_FEATURE_FIXED_POSTDIV,
|
|
.hw.init = CLK_HW_INIT("pll-periph1", "osc24M",
|
|
&ccu_nkmp_ops,
|
|
CLK_SET_RATE_UNGATE),
|
|
},
|
|
};
|
|
|
|
#define SUN50I_H6_PLL_GPU_REG 0x030
|
|
static struct ccu_nkmp pll_gpu_clk = {
|
|
.enable = BIT(31),
|
|
.lock = BIT(28),
|
|
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
|
|
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
|
|
.p = _SUNXI_CCU_DIV(0, 1), /* output divider */
|
|
.common = {
|
|
.reg = 0x030,
|
|
.hw.init = CLK_HW_INIT("pll-gpu", "osc24M",
|
|
&ccu_nkmp_ops,
|
|
CLK_SET_RATE_UNGATE),
|
|
},
|
|
};
|
|
|
|
/*
|
|
* For Video PLLs, the output divider is described as "used for testing"
|
|
* in the user manual. So it's not modelled and forced to 0.
|
|
*/
|
|
#define SUN50I_H6_PLL_VIDEO0_REG 0x040
|
|
static struct ccu_nm pll_video0_clk = {
|
|
.enable = BIT(31),
|
|
.lock = BIT(28),
|
|
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
|
|
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
|
|
.fixed_post_div = 4,
|
|
.min_rate = 288000000,
|
|
.max_rate = 2400000000UL,
|
|
.common = {
|
|
.reg = 0x040,
|
|
.features = CCU_FEATURE_FIXED_POSTDIV,
|
|
.hw.init = CLK_HW_INIT("pll-video0", "osc24M",
|
|
&ccu_nm_ops,
|
|
CLK_SET_RATE_UNGATE),
|
|
},
|
|
};
|
|
|
|
#define SUN50I_H6_PLL_VIDEO1_REG 0x048
|
|
static struct ccu_nm pll_video1_clk = {
|
|
.enable = BIT(31),
|
|
.lock = BIT(28),
|
|
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
|
|
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
|
|
.fixed_post_div = 4,
|
|
.min_rate = 288000000,
|
|
.max_rate = 2400000000UL,
|
|
.common = {
|
|
.reg = 0x048,
|
|
.features = CCU_FEATURE_FIXED_POSTDIV,
|
|
.hw.init = CLK_HW_INIT("pll-video1", "osc24M",
|
|
&ccu_nm_ops,
|
|
CLK_SET_RATE_UNGATE),
|
|
},
|
|
};
|
|
|
|
#define SUN50I_H6_PLL_VE_REG 0x058
|
|
static struct ccu_nkmp pll_ve_clk = {
|
|
.enable = BIT(31),
|
|
.lock = BIT(28),
|
|
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
|
|
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
|
|
.p = _SUNXI_CCU_DIV(0, 1), /* output divider */
|
|
.common = {
|
|
.reg = 0x058,
|
|
.hw.init = CLK_HW_INIT("pll-ve", "osc24M",
|
|
&ccu_nkmp_ops,
|
|
CLK_SET_RATE_UNGATE),
|
|
},
|
|
};
|
|
|
|
#define SUN50I_H6_PLL_DE_REG 0x060
|
|
static struct ccu_nkmp pll_de_clk = {
|
|
.enable = BIT(31),
|
|
.lock = BIT(28),
|
|
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
|
|
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
|
|
.p = _SUNXI_CCU_DIV(0, 1), /* output divider */
|
|
.common = {
|
|
.reg = 0x060,
|
|
.hw.init = CLK_HW_INIT("pll-de", "osc24M",
|
|
&ccu_nkmp_ops,
|
|
CLK_SET_RATE_UNGATE),
|
|
},
|
|
};
|
|
|
|
#define SUN50I_H6_PLL_HSIC_REG 0x070
|
|
static struct ccu_nkmp pll_hsic_clk = {
|
|
.enable = BIT(31),
|
|
.lock = BIT(28),
|
|
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
|
|
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
|
|
.p = _SUNXI_CCU_DIV(0, 1), /* output divider */
|
|
.common = {
|
|
.reg = 0x070,
|
|
.hw.init = CLK_HW_INIT("pll-hsic", "osc24M",
|
|
&ccu_nkmp_ops,
|
|
CLK_SET_RATE_UNGATE),
|
|
},
|
|
};
|
|
|
|
/*
|
|
* The Audio PLL is supposed to have 3 outputs: 2 fixed factors from
|
|
* the base (2x and 4x), and one variable divider (the one true pll audio).
|
|
*
|
|
* We don't have any need for the variable divider for now, so we just
|
|
* hardcode it to match with the clock names.
|
|
*/
|
|
#define SUN50I_H6_PLL_AUDIO_REG 0x078
|
|
|
|
static struct ccu_sdm_setting pll_audio_sdm_table[] = {
|
|
{ .rate = 541900800, .pattern = 0xc001288d, .m = 1, .n = 22 },
|
|
{ .rate = 589824000, .pattern = 0xc00126e9, .m = 1, .n = 24 },
|
|
};
|
|
|
|
static struct ccu_nm pll_audio_base_clk = {
|
|
.enable = BIT(31),
|
|
.lock = BIT(28),
|
|
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
|
|
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
|
|
.sdm = _SUNXI_CCU_SDM(pll_audio_sdm_table,
|
|
BIT(24), 0x178, BIT(31)),
|
|
.common = {
|
|
.features = CCU_FEATURE_SIGMA_DELTA_MOD,
|
|
.reg = 0x078,
|
|
.hw.init = CLK_HW_INIT("pll-audio-base", "osc24M",
|
|
&ccu_nm_ops,
|
|
CLK_SET_RATE_UNGATE),
|
|
},
|
|
};
|
|
|
|
static const char * const cpux_parents[] = { "osc24M", "osc32k",
|
|
"iosc", "pll-cpux" };
|
|
static SUNXI_CCU_MUX(cpux_clk, "cpux", cpux_parents,
|
|
0x500, 24, 2, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
|
|
static SUNXI_CCU_M(axi_clk, "axi", "cpux", 0x500, 0, 2, 0);
|
|
static SUNXI_CCU_M(cpux_apb_clk, "cpux-apb", "cpux", 0x500, 8, 2, 0);
|
|
|
|
static const char * const psi_ahb1_ahb2_parents[] = { "osc24M", "osc32k",
|
|
"iosc", "pll-periph0" };
|
|
static SUNXI_CCU_MP_WITH_MUX(psi_ahb1_ahb2_clk, "psi-ahb1-ahb2",
|
|
psi_ahb1_ahb2_parents,
|
|
0x510,
|
|
0, 5, /* M */
|
|
8, 2, /* P */
|
|
24, 2, /* mux */
|
|
0);
|
|
|
|
static const char * const ahb3_apb1_apb2_parents[] = { "osc24M", "osc32k",
|
|
"psi-ahb1-ahb2",
|
|
"pll-periph0" };
|
|
static SUNXI_CCU_MP_WITH_MUX(ahb3_clk, "ahb3", ahb3_apb1_apb2_parents, 0x51c,
|
|
0, 5, /* M */
|
|
8, 2, /* P */
|
|
24, 2, /* mux */
|
|
0);
|
|
|
|
static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", ahb3_apb1_apb2_parents, 0x520,
|
|
0, 5, /* M */
|
|
8, 2, /* P */
|
|
24, 2, /* mux */
|
|
0);
|
|
|
|
static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", ahb3_apb1_apb2_parents, 0x524,
|
|
0, 5, /* M */
|
|
8, 2, /* P */
|
|
24, 2, /* mux */
|
|
0);
|
|
|
|
static const char * const mbus_parents[] = { "osc24M", "pll-periph0-2x",
|
|
"pll-ddr0", "pll-periph0-4x" };
|
|
static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents, 0x540,
|
|
0, 3, /* M */
|
|
24, 2, /* mux */
|
|
BIT(31), /* gate */
|
|
CLK_IS_CRITICAL);
|
|
|
|
static const char * const de_parents[] = { "pll-de", "pll-periph0-2x" };
|
|
static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents, 0x600,
|
|
0, 4, /* M */
|
|
24, 1, /* mux */
|
|
BIT(31), /* gate */
|
|
CLK_SET_RATE_PARENT);
|
|
|
|
static SUNXI_CCU_GATE(bus_de_clk, "bus-de", "psi-ahb1-ahb2",
|
|
0x60c, BIT(0), 0);
|
|
|
|
static const char * const deinterlace_parents[] = { "pll-periph0",
|
|
"pll-periph1" };
|
|
static SUNXI_CCU_M_WITH_MUX_GATE(deinterlace_clk, "deinterlace",
|
|
deinterlace_parents,
|
|
0x620,
|
|
0, 4, /* M */
|
|
24, 1, /* mux */
|
|
BIT(31), /* gate */
|
|
0);
|
|
|
|
static SUNXI_CCU_GATE(bus_deinterlace_clk, "bus-deinterlace", "psi-ahb1-ahb2",
|
|
0x62c, BIT(0), 0);
|
|
|
|
static const char * const gpu_parents[] = { "pll-gpu" };
|
|
static SUNXI_CCU_M_WITH_MUX_GATE(gpu_clk, "gpu", gpu_parents, 0x670,
|
|
0, 3, /* M */
|
|
24, 1, /* mux */
|
|
BIT(31), /* gate */
|
|
CLK_SET_RATE_PARENT);
|
|
|
|
static SUNXI_CCU_GATE(bus_gpu_clk, "bus-gpu", "psi-ahb1-ahb2",
|
|
0x67c, BIT(0), 0);
|
|
|
|
/* Also applies to EMCE */
|
|
static const char * const ce_parents[] = { "osc24M", "pll-periph0-2x" };
|
|
static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", ce_parents, 0x680,
|
|
0, 4, /* M */
|
|
8, 2, /* N */
|
|
24, 1, /* mux */
|
|
BIT(31),/* gate */
|
|
0);
|
|
|
|
static SUNXI_CCU_GATE(bus_ce_clk, "bus-ce", "psi-ahb1-ahb2",
|
|
0x68c, BIT(0), 0);
|
|
|
|
static const char * const ve_parents[] = { "pll-ve" };
|
|
static SUNXI_CCU_M_WITH_MUX_GATE(ve_clk, "ve", ve_parents, 0x690,
|
|
0, 3, /* M */
|
|
24, 1, /* mux */
|
|
BIT(31), /* gate */
|
|
CLK_SET_RATE_PARENT);
|
|
|
|
static SUNXI_CCU_GATE(bus_ve_clk, "bus-ve", "psi-ahb1-ahb2",
|
|
0x69c, BIT(0), 0);
|
|
|
|
static SUNXI_CCU_MP_WITH_MUX_GATE(emce_clk, "emce", ce_parents, 0x6b0,
|
|
0, 4, /* M */
|
|
8, 2, /* N */
|
|
24, 1, /* mux */
|
|
BIT(31),/* gate */
|
|
0);
|
|
|
|
static SUNXI_CCU_GATE(bus_emce_clk, "bus-emce", "psi-ahb1-ahb2",
|
|
0x6bc, BIT(0), 0);
|
|
|
|
static const char * const vp9_parents[] = { "pll-ve", "pll-periph0-2x" };
|
|
static SUNXI_CCU_M_WITH_MUX_GATE(vp9_clk, "vp9", vp9_parents, 0x6c0,
|
|
0, 3, /* M */
|
|
24, 1, /* mux */
|
|
BIT(31), /* gate */
|
|
0);
|
|
|
|
static SUNXI_CCU_GATE(bus_vp9_clk, "bus-vp9", "psi-ahb1-ahb2",
|
|
0x6cc, BIT(0), 0);
|
|
|
|
static SUNXI_CCU_GATE(bus_dma_clk, "bus-dma", "psi-ahb1-ahb2",
|
|
0x70c, BIT(0), 0);
|
|
|
|
static SUNXI_CCU_GATE(bus_msgbox_clk, "bus-msgbox", "psi-ahb1-ahb2",
|
|
0x71c, BIT(0), 0);
|
|
|
|
static SUNXI_CCU_GATE(bus_spinlock_clk, "bus-spinlock", "psi-ahb1-ahb2",
|
|
0x72c, BIT(0), 0);
|
|
|
|
static SUNXI_CCU_GATE(bus_hstimer_clk, "bus-hstimer", "psi-ahb1-ahb2",
|
|
0x73c, BIT(0), 0);
|
|
|
|
static SUNXI_CCU_GATE(avs_clk, "avs", "osc24M", 0x740, BIT(31), 0);
|
|
|
|
static SUNXI_CCU_GATE(bus_dbg_clk, "bus-dbg", "psi-ahb1-ahb2",
|
|
0x78c, BIT(0), 0);
|
|
|
|
static SUNXI_CCU_GATE(bus_psi_clk, "bus-psi", "psi-ahb1-ahb2",
|
|
0x79c, BIT(0), 0);
|
|
|
|
static SUNXI_CCU_GATE(bus_pwm_clk, "bus-pwm", "apb1", 0x7ac, BIT(0), 0);
|
|
|
|
static SUNXI_CCU_GATE(bus_iommu_clk, "bus-iommu", "apb1", 0x7bc, BIT(0), 0);
|
|
|
|
static const char * const dram_parents[] = { "pll-ddr0" };
|
|
static struct ccu_div dram_clk = {
|
|
.div = _SUNXI_CCU_DIV(0, 2),
|
|
.mux = _SUNXI_CCU_MUX(24, 2),
|
|
.common = {
|
|
.reg = 0x800,
|
|
.hw.init = CLK_HW_INIT_PARENTS("dram",
|
|
dram_parents,
|
|
&ccu_div_ops,
|
|
CLK_IS_CRITICAL),
|
|
},
|
|
};
|
|
|
|
static SUNXI_CCU_GATE(mbus_dma_clk, "mbus-dma", "mbus",
|
|
0x804, BIT(0), 0);
|
|
static SUNXI_CCU_GATE(mbus_ve_clk, "mbus-ve", "mbus",
|
|
0x804, BIT(1), 0);
|
|
static SUNXI_CCU_GATE(mbus_ce_clk, "mbus-ce", "mbus",
|
|
0x804, BIT(2), 0);
|
|
static SUNXI_CCU_GATE(mbus_ts_clk, "mbus-ts", "mbus",
|
|
0x804, BIT(3), 0);
|
|
static SUNXI_CCU_GATE(mbus_nand_clk, "mbus-nand", "mbus",
|
|
0x804, BIT(5), 0);
|
|
static SUNXI_CCU_GATE(mbus_csi_clk, "mbus-csi", "mbus",
|
|
0x804, BIT(8), 0);
|
|
static SUNXI_CCU_GATE(mbus_deinterlace_clk, "mbus-deinterlace", "mbus",
|
|
0x804, BIT(11), 0);
|
|
|
|
static SUNXI_CCU_GATE(bus_dram_clk, "bus-dram", "psi-ahb1-ahb2",
|
|
0x80c, BIT(0), CLK_IS_CRITICAL);
|
|
|
|
static const char * const nand_spi_parents[] = { "osc24M", "pll-periph0",
|
|
"pll-periph1", "pll-periph0-2x",
|
|
"pll-periph1-2x" };
|
|
static SUNXI_CCU_MP_WITH_MUX_GATE(nand0_clk, "nand0", nand_spi_parents, 0x810,
|
|
0, 4, /* M */
|
|
8, 2, /* N */
|
|
24, 3, /* mux */
|
|
BIT(31),/* gate */
|
|
0);
|
|
|
|
static SUNXI_CCU_MP_WITH_MUX_GATE(nand1_clk, "nand1", nand_spi_parents, 0x814,
|
|
0, 4, /* M */
|
|
8, 2, /* N */
|
|
24, 3, /* mux */
|
|
BIT(31),/* gate */
|
|
0);
|
|
|
|
static SUNXI_CCU_GATE(bus_nand_clk, "bus-nand", "ahb3", 0x82c, BIT(0), 0);
|
|
|
|
static const char * const mmc_parents[] = { "osc24M", "pll-periph0-2x",
|
|
"pll-periph1-2x" };
|
|
static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc0_clk, "mmc0", mmc_parents, 0x830,
|
|
0, 4, /* M */
|
|
8, 2, /* N */
|
|
24, 2, /* mux */
|
|
BIT(31), /* gate */
|
|
2, /* post-div */
|
|
0);
|
|
|
|
static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc1_clk, "mmc1", mmc_parents, 0x834,
|
|
0, 4, /* M */
|
|
8, 2, /* N */
|
|
24, 2, /* mux */
|
|
BIT(31), /* gate */
|
|
2, /* post-div */
|
|
0);
|
|
|
|
static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc2_clk, "mmc2", mmc_parents, 0x838,
|
|
0, 4, /* M */
|
|
8, 2, /* N */
|
|
24, 2, /* mux */
|
|
BIT(31), /* gate */
|
|
2, /* post-div */
|
|
0);
|
|
|
|
static SUNXI_CCU_GATE(bus_mmc0_clk, "bus-mmc0", "ahb3", 0x84c, BIT(0), 0);
|
|
static SUNXI_CCU_GATE(bus_mmc1_clk, "bus-mmc1", "ahb3", 0x84c, BIT(1), 0);
|
|
static SUNXI_CCU_GATE(bus_mmc2_clk, "bus-mmc2", "ahb3", 0x84c, BIT(2), 0);
|
|
|
|
static SUNXI_CCU_GATE(bus_uart0_clk, "bus-uart0", "apb2", 0x90c, BIT(0), 0);
|
|
static SUNXI_CCU_GATE(bus_uart1_clk, "bus-uart1", "apb2", 0x90c, BIT(1), 0);
|
|
static SUNXI_CCU_GATE(bus_uart2_clk, "bus-uart2", "apb2", 0x90c, BIT(2), 0);
|
|
static SUNXI_CCU_GATE(bus_uart3_clk, "bus-uart3", "apb2", 0x90c, BIT(3), 0);
|
|
|
|
static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb2", 0x91c, BIT(0), 0);
|
|
static SUNXI_CCU_GATE(bus_i2c1_clk, "bus-i2c1", "apb2", 0x91c, BIT(1), 0);
|
|
static SUNXI_CCU_GATE(bus_i2c2_clk, "bus-i2c2", "apb2", 0x91c, BIT(2), 0);
|
|
static SUNXI_CCU_GATE(bus_i2c3_clk, "bus-i2c3", "apb2", 0x91c, BIT(3), 0);
|
|
|
|
static SUNXI_CCU_GATE(bus_scr0_clk, "bus-scr0", "apb2", 0x93c, BIT(0), 0);
|
|
static SUNXI_CCU_GATE(bus_scr1_clk, "bus-scr1", "apb2", 0x93c, BIT(1), 0);
|
|
|
|
static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", nand_spi_parents, 0x940,
|
|
0, 4, /* M */
|
|
8, 2, /* N */
|
|
24, 3, /* mux */
|
|
BIT(31),/* gate */
|
|
0);
|
|
|
|
static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", nand_spi_parents, 0x944,
|
|
0, 4, /* M */
|
|
8, 2, /* N */
|
|
24, 3, /* mux */
|
|
BIT(31),/* gate */
|
|
0);
|
|
|
|
static SUNXI_CCU_GATE(bus_spi0_clk, "bus-spi0", "ahb3", 0x96c, BIT(0), 0);
|
|
static SUNXI_CCU_GATE(bus_spi1_clk, "bus-spi1", "ahb3", 0x96c, BIT(1), 0);
|
|
|
|
static SUNXI_CCU_GATE(bus_emac_clk, "bus-emac", "ahb3", 0x97c, BIT(0), 0);
|
|
|
|
static const char * const ts_parents[] = { "osc24M", "pll-periph0" };
|
|
static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", ts_parents, 0x9b0,
|
|
0, 4, /* M */
|
|
8, 2, /* N */
|
|
24, 1, /* mux */
|
|
BIT(31),/* gate */
|
|
0);
|
|
|
|
static SUNXI_CCU_GATE(bus_ts_clk, "bus-ts", "ahb3", 0x9bc, BIT(0), 0);
|
|
|
|
static const char * const ir_tx_parents[] = { "osc32k", "osc24M" };
|
|
static SUNXI_CCU_MP_WITH_MUX_GATE(ir_tx_clk, "ir-tx", ir_tx_parents, 0x9c0,
|
|
0, 4, /* M */
|
|
8, 2, /* N */
|
|
24, 1, /* mux */
|
|
BIT(31),/* gate */
|
|
0);
|
|
|
|
static SUNXI_CCU_GATE(bus_ir_tx_clk, "bus-ir-tx", "apb1", 0x9cc, BIT(0), 0);
|
|
|
|
static SUNXI_CCU_GATE(bus_ths_clk, "bus-ths", "apb1", 0x9fc, BIT(0), 0);
|
|
|
|
static const char * const audio_parents[] = { "pll-audio", "pll-audio-2x", "pll-audio-4x" };
|
|
static struct ccu_div i2s3_clk = {
|
|
.enable = BIT(31),
|
|
.div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
|
|
.mux = _SUNXI_CCU_MUX(24, 2),
|
|
.common = {
|
|
.reg = 0xa0c,
|
|
.hw.init = CLK_HW_INIT_PARENTS("i2s3",
|
|
audio_parents,
|
|
&ccu_div_ops,
|
|
CLK_SET_RATE_PARENT),
|
|
},
|
|
};
|
|
|
|
static struct ccu_div i2s0_clk = {
|
|
.enable = BIT(31),
|
|
.div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
|
|
.mux = _SUNXI_CCU_MUX(24, 2),
|
|
.common = {
|
|
.reg = 0xa10,
|
|
.hw.init = CLK_HW_INIT_PARENTS("i2s0",
|
|
audio_parents,
|
|
&ccu_div_ops,
|
|
CLK_SET_RATE_PARENT),
|
|
},
|
|
};
|
|
|
|
static struct ccu_div i2s1_clk = {
|
|
.enable = BIT(31),
|
|
.div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
|
|
.mux = _SUNXI_CCU_MUX(24, 2),
|
|
.common = {
|
|
.reg = 0xa14,
|
|
.hw.init = CLK_HW_INIT_PARENTS("i2s1",
|
|
audio_parents,
|
|
&ccu_div_ops,
|
|
CLK_SET_RATE_PARENT),
|
|
},
|
|
};
|
|
|
|
static struct ccu_div i2s2_clk = {
|
|
.enable = BIT(31),
|
|
.div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
|
|
.mux = _SUNXI_CCU_MUX(24, 2),
|
|
.common = {
|
|
.reg = 0xa18,
|
|
.hw.init = CLK_HW_INIT_PARENTS("i2s2",
|
|
audio_parents,
|
|
&ccu_div_ops,
|
|
CLK_SET_RATE_PARENT),
|
|
},
|
|
};
|
|
|
|
static SUNXI_CCU_GATE(bus_i2s0_clk, "bus-i2s0", "apb1", 0xa1c, BIT(0), 0);
|
|
static SUNXI_CCU_GATE(bus_i2s1_clk, "bus-i2s1", "apb1", 0xa1c, BIT(1), 0);
|
|
static SUNXI_CCU_GATE(bus_i2s2_clk, "bus-i2s2", "apb1", 0xa1c, BIT(2), 0);
|
|
static SUNXI_CCU_GATE(bus_i2s3_clk, "bus-i2s3", "apb1", 0xa1c, BIT(3), 0);
|
|
|
|
static struct ccu_div spdif_clk = {
|
|
.enable = BIT(31),
|
|
.div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
|
|
.mux = _SUNXI_CCU_MUX(24, 2),
|
|
.common = {
|
|
.reg = 0xa20,
|
|
.hw.init = CLK_HW_INIT_PARENTS("spdif",
|
|
audio_parents,
|
|
&ccu_div_ops,
|
|
0),
|
|
},
|
|
};
|
|
|
|
static SUNXI_CCU_GATE(bus_spdif_clk, "bus-spdif", "apb1", 0xa2c, BIT(0), 0);
|
|
|
|
static struct ccu_div dmic_clk = {
|
|
.enable = BIT(31),
|
|
.div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
|
|
.mux = _SUNXI_CCU_MUX(24, 2),
|
|
.common = {
|
|
.reg = 0xa40,
|
|
.hw.init = CLK_HW_INIT_PARENTS("dmic",
|
|
audio_parents,
|
|
&ccu_div_ops,
|
|
0),
|
|
},
|
|
};
|
|
|
|
static SUNXI_CCU_GATE(bus_dmic_clk, "bus-dmic", "apb1", 0xa4c, BIT(0), 0);
|
|
|
|
static struct ccu_div audio_hub_clk = {
|
|
.enable = BIT(31),
|
|
.div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
|
|
.mux = _SUNXI_CCU_MUX(24, 2),
|
|
.common = {
|
|
.reg = 0xa60,
|
|
.hw.init = CLK_HW_INIT_PARENTS("audio-hub",
|
|
audio_parents,
|
|
&ccu_div_ops,
|
|
0),
|
|
},
|
|
};
|
|
|
|
static SUNXI_CCU_GATE(bus_audio_hub_clk, "bus-audio-hub", "apb1", 0xa6c, BIT(0), 0);
|
|
|
|
/*
|
|
* There are OHCI 12M clock source selection bits for 2 USB 2.0 ports.
|
|
* We will force them to 0 (12M divided from 48M).
|
|
*/
|
|
#define SUN50I_H6_USB0_CLK_REG 0xa70
|
|
#define SUN50I_H6_USB3_CLK_REG 0xa7c
|
|
|
|
static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "osc12M", 0xa70, BIT(31), 0);
|
|
static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "osc24M", 0xa70, BIT(29), 0);
|
|
|
|
static SUNXI_CCU_GATE(usb_phy1_clk, "usb-phy1", "osc24M", 0xa74, BIT(29), 0);
|
|
|
|
static SUNXI_CCU_GATE(usb_ohci3_clk, "usb-ohci3", "osc12M", 0xa7c, BIT(31), 0);
|
|
static SUNXI_CCU_GATE(usb_phy3_clk, "usb-phy3", "osc12M", 0xa7c, BIT(29), 0);
|
|
static SUNXI_CCU_GATE(usb_hsic_12m_clk, "usb-hsic-12M", "osc12M", 0xa7c, BIT(27), 0);
|
|
static SUNXI_CCU_GATE(usb_hsic_clk, "usb-hsic", "pll-hsic", 0xa7c, BIT(26), 0);
|
|
|
|
static SUNXI_CCU_GATE(bus_ohci0_clk, "bus-ohci0", "ahb3", 0xa8c, BIT(0), 0);
|
|
static SUNXI_CCU_GATE(bus_ohci3_clk, "bus-ohci3", "ahb3", 0xa8c, BIT(3), 0);
|
|
static SUNXI_CCU_GATE(bus_ehci0_clk, "bus-ehci0", "ahb3", 0xa8c, BIT(4), 0);
|
|
static SUNXI_CCU_GATE(bus_xhci_clk, "bus-xhci", "ahb3", 0xa8c, BIT(5), 0);
|
|
static SUNXI_CCU_GATE(bus_ehci3_clk, "bus-ehci3", "ahb3", 0xa8c, BIT(7), 0);
|
|
static SUNXI_CCU_GATE(bus_otg_clk, "bus-otg", "ahb3", 0xa8c, BIT(8), 0);
|
|
|
|
static struct clk_fixed_factor pll_periph0_4x_clk;
|
|
static CLK_FIXED_FACTOR_HW(pcie_ref_100m_clk, "pcie-ref-100M",
|
|
&pll_periph0_4x_clk.hw, 24, 1, 0);
|
|
static SUNXI_CCU_GATE(pcie_ref_clk, "pcie-ref", "pcie-ref-100M",
|
|
0xab0, BIT(31), 0);
|
|
static SUNXI_CCU_GATE(pcie_ref_out_clk, "pcie-ref-out", "pcie-ref",
|
|
0xab0, BIT(30), 0);
|
|
|
|
static SUNXI_CCU_M_WITH_GATE(pcie_maxi_clk, "pcie-maxi",
|
|
"pll-periph0", 0xab4,
|
|
0, 4, /* M */
|
|
BIT(31), /* gate */
|
|
0);
|
|
|
|
static SUNXI_CCU_M_WITH_GATE(pcie_aux_clk, "pcie-aux", "osc24M", 0xab8,
|
|
0, 5, /* M */
|
|
BIT(31), /* gate */
|
|
0);
|
|
|
|
static SUNXI_CCU_GATE(bus_pcie_clk, "bus-pcie", "psi-ahb1-ahb2",
|
|
0xabc, BIT(0), 0);
|
|
|
|
static const char * const hdmi_parents[] = { "pll-video0", "pll-video1",
|
|
"pll-video1-4x" };
|
|
static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents, 0xb00,
|
|
0, 4, /* M */
|
|
24, 2, /* mux */
|
|
BIT(31), /* gate */
|
|
0);
|
|
|
|
static SUNXI_CCU_GATE(hdmi_slow_clk, "hdmi-slow", "osc24M", 0xb04, BIT(31), 0);
|
|
|
|
static const char * const hdmi_cec_parents[] = { "osc32k", "pll-periph0-2x" };
|
|
static const struct ccu_mux_fixed_prediv hdmi_cec_predivs[] = {
|
|
{ .index = 1, .div = 36621 },
|
|
};
|
|
|
|
#define SUN50I_H6_HDMI_CEC_CLK_REG 0xb10
|
|
static struct ccu_mux hdmi_cec_clk = {
|
|
.enable = BIT(31),
|
|
|
|
.mux = {
|
|
.shift = 24,
|
|
.width = 2,
|
|
|
|
.fixed_predivs = hdmi_cec_predivs,
|
|
.n_predivs = ARRAY_SIZE(hdmi_cec_predivs),
|
|
},
|
|
|
|
.common = {
|
|
.reg = 0xb10,
|
|
.features = CCU_FEATURE_VARIABLE_PREDIV,
|
|
.hw.init = CLK_HW_INIT_PARENTS("hdmi-cec",
|
|
hdmi_cec_parents,
|
|
&ccu_mux_ops,
|
|
0),
|
|
},
|
|
};
|
|
|
|
static SUNXI_CCU_GATE(bus_hdmi_clk, "bus-hdmi", "ahb3", 0xb1c, BIT(0), 0);
|
|
|
|
static SUNXI_CCU_GATE(bus_tcon_top_clk, "bus-tcon-top", "ahb3",
|
|
0xb5c, BIT(0), 0);
|
|
|
|
static const char * const tcon_lcd0_parents[] = { "pll-video0",
|
|
"pll-video0-4x",
|
|
"pll-video1" };
|
|
static SUNXI_CCU_MUX_WITH_GATE(tcon_lcd0_clk, "tcon-lcd0",
|
|
tcon_lcd0_parents, 0xb60,
|
|
24, 3, /* mux */
|
|
BIT(31), /* gate */
|
|
CLK_SET_RATE_PARENT);
|
|
|
|
static SUNXI_CCU_GATE(bus_tcon_lcd0_clk, "bus-tcon-lcd0", "ahb3",
|
|
0xb7c, BIT(0), 0);
|
|
|
|
static const char * const tcon_tv0_parents[] = { "pll-video0",
|
|
"pll-video0-4x",
|
|
"pll-video1",
|
|
"pll-video1-4x" };
|
|
static SUNXI_CCU_MP_WITH_MUX_GATE(tcon_tv0_clk, "tcon-tv0",
|
|
tcon_tv0_parents, 0xb80,
|
|
0, 4, /* M */
|
|
8, 2, /* P */
|
|
24, 3, /* mux */
|
|
BIT(31), /* gate */
|
|
CLK_SET_RATE_PARENT);
|
|
|
|
static SUNXI_CCU_GATE(bus_tcon_tv0_clk, "bus-tcon-tv0", "ahb3",
|
|
0xb9c, BIT(0), 0);
|
|
|
|
static SUNXI_CCU_GATE(csi_cci_clk, "csi-cci", "osc24M", 0xc00, BIT(0), 0);
|
|
|
|
static const char * const csi_top_parents[] = { "pll-video0", "pll-ve",
|
|
"pll-periph0" };
|
|
static const u8 csi_top_table[] = { 0, 2, 3 };
|
|
static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(csi_top_clk, "csi-top",
|
|
csi_top_parents, csi_top_table, 0xc04,
|
|
0, 4, /* M */
|
|
24, 3, /* mux */
|
|
BIT(31), /* gate */
|
|
0);
|
|
|
|
static const char * const csi_mclk_parents[] = { "osc24M", "pll-video0",
|
|
"pll-periph0", "pll-periph1" };
|
|
static SUNXI_CCU_M_WITH_MUX_GATE(csi_mclk_clk, "csi-mclk",
|
|
csi_mclk_parents, 0xc08,
|
|
0, 5, /* M */
|
|
24, 3, /* mux */
|
|
BIT(31), /* gate */
|
|
0);
|
|
|
|
static SUNXI_CCU_GATE(bus_csi_clk, "bus-csi", "ahb3", 0xc2c, BIT(0), 0);
|
|
|
|
static const char * const hdcp_parents[] = { "pll-periph0", "pll-periph1" };
|
|
static SUNXI_CCU_M_WITH_MUX_GATE(hdcp_clk, "hdcp", hdcp_parents, 0xc40,
|
|
0, 4, /* M */
|
|
24, 2, /* mux */
|
|
BIT(31), /* gate */
|
|
0);
|
|
|
|
static SUNXI_CCU_GATE(bus_hdcp_clk, "bus-hdcp", "ahb3", 0xc4c, BIT(0), 0);
|
|
|
|
/* Fixed factor clocks */
|
|
static CLK_FIXED_FACTOR_FW_NAME(osc12M_clk, "osc12M", "hosc", 2, 1, 0);
|
|
|
|
static const struct clk_hw *clk_parent_pll_audio[] = {
|
|
&pll_audio_base_clk.common.hw
|
|
};
|
|
|
|
/*
|
|
* The divider of pll-audio is fixed to 24 for now, so 24576000 and 22579200
|
|
* rates can be set exactly in conjunction with sigma-delta modulation.
|
|
*/
|
|
static CLK_FIXED_FACTOR_HWS(pll_audio_clk, "pll-audio",
|
|
clk_parent_pll_audio,
|
|
24, 1, CLK_SET_RATE_PARENT);
|
|
static CLK_FIXED_FACTOR_HWS(pll_audio_2x_clk, "pll-audio-2x",
|
|
clk_parent_pll_audio,
|
|
4, 1, CLK_SET_RATE_PARENT);
|
|
static CLK_FIXED_FACTOR_HWS(pll_audio_4x_clk, "pll-audio-4x",
|
|
clk_parent_pll_audio,
|
|
2, 1, CLK_SET_RATE_PARENT);
|
|
|
|
static const struct clk_hw *pll_periph0_parents[] = {
|
|
&pll_periph0_clk.common.hw
|
|
};
|
|
static CLK_FIXED_FACTOR_HWS(pll_periph0_4x_clk, "pll-periph0-4x",
|
|
pll_periph0_parents,
|
|
1, 4, 0);
|
|
static CLK_FIXED_FACTOR_HWS(pll_periph0_2x_clk, "pll-periph0-2x",
|
|
pll_periph0_parents,
|
|
1, 2, 0);
|
|
|
|
static const struct clk_hw *pll_periph1_parents[] = {
|
|
&pll_periph1_clk.common.hw
|
|
};
|
|
static CLK_FIXED_FACTOR_HWS(pll_periph1_4x_clk, "pll-periph1-4x",
|
|
pll_periph1_parents,
|
|
1, 4, 0);
|
|
static CLK_FIXED_FACTOR_HWS(pll_periph1_2x_clk, "pll-periph1-2x",
|
|
pll_periph1_parents,
|
|
1, 2, 0);
|
|
|
|
static CLK_FIXED_FACTOR_HW(pll_video0_4x_clk, "pll-video0-4x",
|
|
&pll_video0_clk.common.hw,
|
|
1, 4, CLK_SET_RATE_PARENT);
|
|
static CLK_FIXED_FACTOR_HW(pll_video1_4x_clk, "pll-video1-4x",
|
|
&pll_video1_clk.common.hw,
|
|
1, 4, CLK_SET_RATE_PARENT);
|
|
|
|
static struct ccu_common *sun50i_h6_ccu_clks[] = {
|
|
&pll_cpux_clk.common,
|
|
&pll_ddr0_clk.common,
|
|
&pll_periph0_clk.common,
|
|
&pll_periph1_clk.common,
|
|
&pll_gpu_clk.common,
|
|
&pll_video0_clk.common,
|
|
&pll_video1_clk.common,
|
|
&pll_ve_clk.common,
|
|
&pll_de_clk.common,
|
|
&pll_hsic_clk.common,
|
|
&pll_audio_base_clk.common,
|
|
&cpux_clk.common,
|
|
&axi_clk.common,
|
|
&cpux_apb_clk.common,
|
|
&psi_ahb1_ahb2_clk.common,
|
|
&ahb3_clk.common,
|
|
&apb1_clk.common,
|
|
&apb2_clk.common,
|
|
&mbus_clk.common,
|
|
&de_clk.common,
|
|
&bus_de_clk.common,
|
|
&deinterlace_clk.common,
|
|
&bus_deinterlace_clk.common,
|
|
&gpu_clk.common,
|
|
&bus_gpu_clk.common,
|
|
&ce_clk.common,
|
|
&bus_ce_clk.common,
|
|
&ve_clk.common,
|
|
&bus_ve_clk.common,
|
|
&emce_clk.common,
|
|
&bus_emce_clk.common,
|
|
&vp9_clk.common,
|
|
&bus_vp9_clk.common,
|
|
&bus_dma_clk.common,
|
|
&bus_msgbox_clk.common,
|
|
&bus_spinlock_clk.common,
|
|
&bus_hstimer_clk.common,
|
|
&avs_clk.common,
|
|
&bus_dbg_clk.common,
|
|
&bus_psi_clk.common,
|
|
&bus_pwm_clk.common,
|
|
&bus_iommu_clk.common,
|
|
&dram_clk.common,
|
|
&mbus_dma_clk.common,
|
|
&mbus_ve_clk.common,
|
|
&mbus_ce_clk.common,
|
|
&mbus_ts_clk.common,
|
|
&mbus_nand_clk.common,
|
|
&mbus_csi_clk.common,
|
|
&mbus_deinterlace_clk.common,
|
|
&bus_dram_clk.common,
|
|
&nand0_clk.common,
|
|
&nand1_clk.common,
|
|
&bus_nand_clk.common,
|
|
&mmc0_clk.common,
|
|
&mmc1_clk.common,
|
|
&mmc2_clk.common,
|
|
&bus_mmc0_clk.common,
|
|
&bus_mmc1_clk.common,
|
|
&bus_mmc2_clk.common,
|
|
&bus_uart0_clk.common,
|
|
&bus_uart1_clk.common,
|
|
&bus_uart2_clk.common,
|
|
&bus_uart3_clk.common,
|
|
&bus_i2c0_clk.common,
|
|
&bus_i2c1_clk.common,
|
|
&bus_i2c2_clk.common,
|
|
&bus_i2c3_clk.common,
|
|
&bus_scr0_clk.common,
|
|
&bus_scr1_clk.common,
|
|
&spi0_clk.common,
|
|
&spi1_clk.common,
|
|
&bus_spi0_clk.common,
|
|
&bus_spi1_clk.common,
|
|
&bus_emac_clk.common,
|
|
&ts_clk.common,
|
|
&bus_ts_clk.common,
|
|
&ir_tx_clk.common,
|
|
&bus_ir_tx_clk.common,
|
|
&bus_ths_clk.common,
|
|
&i2s3_clk.common,
|
|
&i2s0_clk.common,
|
|
&i2s1_clk.common,
|
|
&i2s2_clk.common,
|
|
&bus_i2s0_clk.common,
|
|
&bus_i2s1_clk.common,
|
|
&bus_i2s2_clk.common,
|
|
&bus_i2s3_clk.common,
|
|
&spdif_clk.common,
|
|
&bus_spdif_clk.common,
|
|
&dmic_clk.common,
|
|
&bus_dmic_clk.common,
|
|
&audio_hub_clk.common,
|
|
&bus_audio_hub_clk.common,
|
|
&usb_ohci0_clk.common,
|
|
&usb_phy0_clk.common,
|
|
&usb_phy1_clk.common,
|
|
&usb_ohci3_clk.common,
|
|
&usb_phy3_clk.common,
|
|
&usb_hsic_12m_clk.common,
|
|
&usb_hsic_clk.common,
|
|
&bus_ohci0_clk.common,
|
|
&bus_ohci3_clk.common,
|
|
&bus_ehci0_clk.common,
|
|
&bus_xhci_clk.common,
|
|
&bus_ehci3_clk.common,
|
|
&bus_otg_clk.common,
|
|
&pcie_ref_clk.common,
|
|
&pcie_ref_out_clk.common,
|
|
&pcie_maxi_clk.common,
|
|
&pcie_aux_clk.common,
|
|
&bus_pcie_clk.common,
|
|
&hdmi_clk.common,
|
|
&hdmi_slow_clk.common,
|
|
&hdmi_cec_clk.common,
|
|
&bus_hdmi_clk.common,
|
|
&bus_tcon_top_clk.common,
|
|
&tcon_lcd0_clk.common,
|
|
&bus_tcon_lcd0_clk.common,
|
|
&tcon_tv0_clk.common,
|
|
&bus_tcon_tv0_clk.common,
|
|
&csi_cci_clk.common,
|
|
&csi_top_clk.common,
|
|
&csi_mclk_clk.common,
|
|
&bus_csi_clk.common,
|
|
&hdcp_clk.common,
|
|
&bus_hdcp_clk.common,
|
|
};
|
|
|
|
static struct clk_hw_onecell_data sun50i_h6_hw_clks = {
|
|
.hws = {
|
|
[CLK_OSC12M] = &osc12M_clk.hw,
|
|
[CLK_PLL_CPUX] = &pll_cpux_clk.common.hw,
|
|
[CLK_PLL_DDR0] = &pll_ddr0_clk.common.hw,
|
|
[CLK_PLL_PERIPH0] = &pll_periph0_clk.common.hw,
|
|
[CLK_PLL_PERIPH0_2X] = &pll_periph0_2x_clk.hw,
|
|
[CLK_PLL_PERIPH0_4X] = &pll_periph0_4x_clk.hw,
|
|
[CLK_PLL_PERIPH1] = &pll_periph1_clk.common.hw,
|
|
[CLK_PLL_PERIPH1_2X] = &pll_periph1_2x_clk.hw,
|
|
[CLK_PLL_PERIPH1_4X] = &pll_periph1_4x_clk.hw,
|
|
[CLK_PLL_GPU] = &pll_gpu_clk.common.hw,
|
|
[CLK_PLL_VIDEO0] = &pll_video0_clk.common.hw,
|
|
[CLK_PLL_VIDEO0_4X] = &pll_video0_4x_clk.hw,
|
|
[CLK_PLL_VIDEO1] = &pll_video1_clk.common.hw,
|
|
[CLK_PLL_VIDEO1_4X] = &pll_video1_4x_clk.hw,
|
|
[CLK_PLL_VE] = &pll_ve_clk.common.hw,
|
|
[CLK_PLL_DE] = &pll_de_clk.common.hw,
|
|
[CLK_PLL_HSIC] = &pll_hsic_clk.common.hw,
|
|
[CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw,
|
|
[CLK_PLL_AUDIO] = &pll_audio_clk.hw,
|
|
[CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
|
|
[CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
|
|
[CLK_CPUX] = &cpux_clk.common.hw,
|
|
[CLK_AXI] = &axi_clk.common.hw,
|
|
[CLK_CPUX_APB] = &cpux_apb_clk.common.hw,
|
|
[CLK_PSI_AHB1_AHB2] = &psi_ahb1_ahb2_clk.common.hw,
|
|
[CLK_AHB3] = &ahb3_clk.common.hw,
|
|
[CLK_APB1] = &apb1_clk.common.hw,
|
|
[CLK_APB2] = &apb2_clk.common.hw,
|
|
[CLK_MBUS] = &mbus_clk.common.hw,
|
|
[CLK_DE] = &de_clk.common.hw,
|
|
[CLK_BUS_DE] = &bus_de_clk.common.hw,
|
|
[CLK_DEINTERLACE] = &deinterlace_clk.common.hw,
|
|
[CLK_BUS_DEINTERLACE] = &bus_deinterlace_clk.common.hw,
|
|
[CLK_GPU] = &gpu_clk.common.hw,
|
|
[CLK_BUS_GPU] = &bus_gpu_clk.common.hw,
|
|
[CLK_CE] = &ce_clk.common.hw,
|
|
[CLK_BUS_CE] = &bus_ce_clk.common.hw,
|
|
[CLK_VE] = &ve_clk.common.hw,
|
|
[CLK_BUS_VE] = &bus_ve_clk.common.hw,
|
|
[CLK_EMCE] = &emce_clk.common.hw,
|
|
[CLK_BUS_EMCE] = &bus_emce_clk.common.hw,
|
|
[CLK_VP9] = &vp9_clk.common.hw,
|
|
[CLK_BUS_VP9] = &bus_vp9_clk.common.hw,
|
|
[CLK_BUS_DMA] = &bus_dma_clk.common.hw,
|
|
[CLK_BUS_MSGBOX] = &bus_msgbox_clk.common.hw,
|
|
[CLK_BUS_SPINLOCK] = &bus_spinlock_clk.common.hw,
|
|
[CLK_BUS_HSTIMER] = &bus_hstimer_clk.common.hw,
|
|
[CLK_AVS] = &avs_clk.common.hw,
|
|
[CLK_BUS_DBG] = &bus_dbg_clk.common.hw,
|
|
[CLK_BUS_PSI] = &bus_psi_clk.common.hw,
|
|
[CLK_BUS_PWM] = &bus_pwm_clk.common.hw,
|
|
[CLK_BUS_IOMMU] = &bus_iommu_clk.common.hw,
|
|
[CLK_DRAM] = &dram_clk.common.hw,
|
|
[CLK_MBUS_DMA] = &mbus_dma_clk.common.hw,
|
|
[CLK_MBUS_VE] = &mbus_ve_clk.common.hw,
|
|
[CLK_MBUS_CE] = &mbus_ce_clk.common.hw,
|
|
[CLK_MBUS_TS] = &mbus_ts_clk.common.hw,
|
|
[CLK_MBUS_NAND] = &mbus_nand_clk.common.hw,
|
|
[CLK_MBUS_CSI] = &mbus_csi_clk.common.hw,
|
|
[CLK_MBUS_DEINTERLACE] = &mbus_deinterlace_clk.common.hw,
|
|
[CLK_BUS_DRAM] = &bus_dram_clk.common.hw,
|
|
[CLK_NAND0] = &nand0_clk.common.hw,
|
|
[CLK_NAND1] = &nand1_clk.common.hw,
|
|
[CLK_BUS_NAND] = &bus_nand_clk.common.hw,
|
|
[CLK_MMC0] = &mmc0_clk.common.hw,
|
|
[CLK_MMC1] = &mmc1_clk.common.hw,
|
|
[CLK_MMC2] = &mmc2_clk.common.hw,
|
|
[CLK_BUS_MMC0] = &bus_mmc0_clk.common.hw,
|
|
[CLK_BUS_MMC1] = &bus_mmc1_clk.common.hw,
|
|
[CLK_BUS_MMC2] = &bus_mmc2_clk.common.hw,
|
|
[CLK_BUS_UART0] = &bus_uart0_clk.common.hw,
|
|
[CLK_BUS_UART1] = &bus_uart1_clk.common.hw,
|
|
[CLK_BUS_UART2] = &bus_uart2_clk.common.hw,
|
|
[CLK_BUS_UART3] = &bus_uart3_clk.common.hw,
|
|
[CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw,
|
|
[CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw,
|
|
[CLK_BUS_I2C2] = &bus_i2c2_clk.common.hw,
|
|
[CLK_BUS_I2C3] = &bus_i2c3_clk.common.hw,
|
|
[CLK_BUS_SCR0] = &bus_scr0_clk.common.hw,
|
|
[CLK_BUS_SCR1] = &bus_scr1_clk.common.hw,
|
|
[CLK_SPI0] = &spi0_clk.common.hw,
|
|
[CLK_SPI1] = &spi1_clk.common.hw,
|
|
[CLK_BUS_SPI0] = &bus_spi0_clk.common.hw,
|
|
[CLK_BUS_SPI1] = &bus_spi1_clk.common.hw,
|
|
[CLK_BUS_EMAC] = &bus_emac_clk.common.hw,
|
|
[CLK_TS] = &ts_clk.common.hw,
|
|
[CLK_BUS_TS] = &bus_ts_clk.common.hw,
|
|
[CLK_IR_TX] = &ir_tx_clk.common.hw,
|
|
[CLK_BUS_IR_TX] = &bus_ir_tx_clk.common.hw,
|
|
[CLK_BUS_THS] = &bus_ths_clk.common.hw,
|
|
[CLK_I2S3] = &i2s3_clk.common.hw,
|
|
[CLK_I2S0] = &i2s0_clk.common.hw,
|
|
[CLK_I2S1] = &i2s1_clk.common.hw,
|
|
[CLK_I2S2] = &i2s2_clk.common.hw,
|
|
[CLK_BUS_I2S0] = &bus_i2s0_clk.common.hw,
|
|
[CLK_BUS_I2S1] = &bus_i2s1_clk.common.hw,
|
|
[CLK_BUS_I2S2] = &bus_i2s2_clk.common.hw,
|
|
[CLK_BUS_I2S3] = &bus_i2s3_clk.common.hw,
|
|
[CLK_SPDIF] = &spdif_clk.common.hw,
|
|
[CLK_BUS_SPDIF] = &bus_spdif_clk.common.hw,
|
|
[CLK_DMIC] = &dmic_clk.common.hw,
|
|
[CLK_BUS_DMIC] = &bus_dmic_clk.common.hw,
|
|
[CLK_AUDIO_HUB] = &audio_hub_clk.common.hw,
|
|
[CLK_BUS_AUDIO_HUB] = &bus_audio_hub_clk.common.hw,
|
|
[CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
|
|
[CLK_USB_PHY0] = &usb_phy0_clk.common.hw,
|
|
[CLK_USB_PHY1] = &usb_phy1_clk.common.hw,
|
|
[CLK_USB_OHCI3] = &usb_ohci3_clk.common.hw,
|
|
[CLK_USB_PHY3] = &usb_phy3_clk.common.hw,
|
|
[CLK_USB_HSIC_12M] = &usb_hsic_12m_clk.common.hw,
|
|
[CLK_USB_HSIC] = &usb_hsic_clk.common.hw,
|
|
[CLK_BUS_OHCI0] = &bus_ohci0_clk.common.hw,
|
|
[CLK_BUS_OHCI3] = &bus_ohci3_clk.common.hw,
|
|
[CLK_BUS_EHCI0] = &bus_ehci0_clk.common.hw,
|
|
[CLK_BUS_XHCI] = &bus_xhci_clk.common.hw,
|
|
[CLK_BUS_EHCI3] = &bus_ehci3_clk.common.hw,
|
|
[CLK_BUS_OTG] = &bus_otg_clk.common.hw,
|
|
[CLK_PCIE_REF_100M] = &pcie_ref_100m_clk.hw,
|
|
[CLK_PCIE_REF] = &pcie_ref_clk.common.hw,
|
|
[CLK_PCIE_REF_OUT] = &pcie_ref_out_clk.common.hw,
|
|
[CLK_PCIE_MAXI] = &pcie_maxi_clk.common.hw,
|
|
[CLK_PCIE_AUX] = &pcie_aux_clk.common.hw,
|
|
[CLK_BUS_PCIE] = &bus_pcie_clk.common.hw,
|
|
[CLK_HDMI] = &hdmi_clk.common.hw,
|
|
[CLK_HDMI_SLOW] = &hdmi_slow_clk.common.hw,
|
|
[CLK_HDMI_CEC] = &hdmi_cec_clk.common.hw,
|
|
[CLK_BUS_HDMI] = &bus_hdmi_clk.common.hw,
|
|
[CLK_BUS_TCON_TOP] = &bus_tcon_top_clk.common.hw,
|
|
[CLK_TCON_LCD0] = &tcon_lcd0_clk.common.hw,
|
|
[CLK_BUS_TCON_LCD0] = &bus_tcon_lcd0_clk.common.hw,
|
|
[CLK_TCON_TV0] = &tcon_tv0_clk.common.hw,
|
|
[CLK_BUS_TCON_TV0] = &bus_tcon_tv0_clk.common.hw,
|
|
[CLK_CSI_CCI] = &csi_cci_clk.common.hw,
|
|
[CLK_CSI_TOP] = &csi_top_clk.common.hw,
|
|
[CLK_CSI_MCLK] = &csi_mclk_clk.common.hw,
|
|
[CLK_BUS_CSI] = &bus_csi_clk.common.hw,
|
|
[CLK_HDCP] = &hdcp_clk.common.hw,
|
|
[CLK_BUS_HDCP] = &bus_hdcp_clk.common.hw,
|
|
},
|
|
.num = CLK_NUMBER,
|
|
};
|
|
|
|
static struct ccu_reset_map sun50i_h6_ccu_resets[] = {
|
|
[RST_MBUS] = { 0x540, BIT(30) },
|
|
|
|
[RST_BUS_DE] = { 0x60c, BIT(16) },
|
|
[RST_BUS_DEINTERLACE] = { 0x62c, BIT(16) },
|
|
[RST_BUS_GPU] = { 0x67c, BIT(16) },
|
|
[RST_BUS_CE] = { 0x68c, BIT(16) },
|
|
[RST_BUS_VE] = { 0x69c, BIT(16) },
|
|
[RST_BUS_EMCE] = { 0x6bc, BIT(16) },
|
|
[RST_BUS_VP9] = { 0x6cc, BIT(16) },
|
|
[RST_BUS_DMA] = { 0x70c, BIT(16) },
|
|
[RST_BUS_MSGBOX] = { 0x71c, BIT(16) },
|
|
[RST_BUS_SPINLOCK] = { 0x72c, BIT(16) },
|
|
[RST_BUS_HSTIMER] = { 0x73c, BIT(16) },
|
|
[RST_BUS_DBG] = { 0x78c, BIT(16) },
|
|
[RST_BUS_PSI] = { 0x79c, BIT(16) },
|
|
[RST_BUS_PWM] = { 0x7ac, BIT(16) },
|
|
[RST_BUS_IOMMU] = { 0x7bc, BIT(16) },
|
|
[RST_BUS_DRAM] = { 0x80c, BIT(16) },
|
|
[RST_BUS_NAND] = { 0x82c, BIT(16) },
|
|
[RST_BUS_MMC0] = { 0x84c, BIT(16) },
|
|
[RST_BUS_MMC1] = { 0x84c, BIT(17) },
|
|
[RST_BUS_MMC2] = { 0x84c, BIT(18) },
|
|
[RST_BUS_UART0] = { 0x90c, BIT(16) },
|
|
[RST_BUS_UART1] = { 0x90c, BIT(17) },
|
|
[RST_BUS_UART2] = { 0x90c, BIT(18) },
|
|
[RST_BUS_UART3] = { 0x90c, BIT(19) },
|
|
[RST_BUS_I2C0] = { 0x91c, BIT(16) },
|
|
[RST_BUS_I2C1] = { 0x91c, BIT(17) },
|
|
[RST_BUS_I2C2] = { 0x91c, BIT(18) },
|
|
[RST_BUS_I2C3] = { 0x91c, BIT(19) },
|
|
[RST_BUS_SCR0] = { 0x93c, BIT(16) },
|
|
[RST_BUS_SCR1] = { 0x93c, BIT(17) },
|
|
[RST_BUS_SPI0] = { 0x96c, BIT(16) },
|
|
[RST_BUS_SPI1] = { 0x96c, BIT(17) },
|
|
[RST_BUS_EMAC] = { 0x97c, BIT(16) },
|
|
[RST_BUS_TS] = { 0x9bc, BIT(16) },
|
|
[RST_BUS_IR_TX] = { 0x9cc, BIT(16) },
|
|
[RST_BUS_THS] = { 0x9fc, BIT(16) },
|
|
[RST_BUS_I2S0] = { 0xa1c, BIT(16) },
|
|
[RST_BUS_I2S1] = { 0xa1c, BIT(17) },
|
|
[RST_BUS_I2S2] = { 0xa1c, BIT(18) },
|
|
[RST_BUS_I2S3] = { 0xa1c, BIT(19) },
|
|
[RST_BUS_SPDIF] = { 0xa2c, BIT(16) },
|
|
[RST_BUS_DMIC] = { 0xa4c, BIT(16) },
|
|
[RST_BUS_AUDIO_HUB] = { 0xa6c, BIT(16) },
|
|
|
|
[RST_USB_PHY0] = { 0xa70, BIT(30) },
|
|
[RST_USB_PHY1] = { 0xa74, BIT(30) },
|
|
[RST_USB_PHY3] = { 0xa7c, BIT(30) },
|
|
[RST_USB_HSIC] = { 0xa7c, BIT(28) },
|
|
|
|
[RST_BUS_OHCI0] = { 0xa8c, BIT(16) },
|
|
[RST_BUS_OHCI3] = { 0xa8c, BIT(19) },
|
|
[RST_BUS_EHCI0] = { 0xa8c, BIT(20) },
|
|
[RST_BUS_XHCI] = { 0xa8c, BIT(21) },
|
|
[RST_BUS_EHCI3] = { 0xa8c, BIT(23) },
|
|
[RST_BUS_OTG] = { 0xa8c, BIT(24) },
|
|
[RST_BUS_PCIE] = { 0xabc, BIT(16) },
|
|
|
|
[RST_PCIE_POWERUP] = { 0xabc, BIT(17) },
|
|
|
|
[RST_BUS_HDMI] = { 0xb1c, BIT(16) },
|
|
[RST_BUS_HDMI_SUB] = { 0xb1c, BIT(17) },
|
|
[RST_BUS_TCON_TOP] = { 0xb5c, BIT(16) },
|
|
[RST_BUS_TCON_LCD0] = { 0xb7c, BIT(16) },
|
|
[RST_BUS_TCON_TV0] = { 0xb9c, BIT(16) },
|
|
[RST_BUS_CSI] = { 0xc2c, BIT(16) },
|
|
[RST_BUS_HDCP] = { 0xc4c, BIT(16) },
|
|
};
|
|
|
|
static const struct sunxi_ccu_desc sun50i_h6_ccu_desc = {
|
|
.ccu_clks = sun50i_h6_ccu_clks,
|
|
.num_ccu_clks = ARRAY_SIZE(sun50i_h6_ccu_clks),
|
|
|
|
.hw_clks = &sun50i_h6_hw_clks,
|
|
|
|
.resets = sun50i_h6_ccu_resets,
|
|
.num_resets = ARRAY_SIZE(sun50i_h6_ccu_resets),
|
|
};
|
|
|
|
static const u32 pll_regs[] = {
|
|
SUN50I_H6_PLL_CPUX_REG,
|
|
SUN50I_H6_PLL_DDR0_REG,
|
|
SUN50I_H6_PLL_PERIPH0_REG,
|
|
SUN50I_H6_PLL_PERIPH1_REG,
|
|
SUN50I_H6_PLL_GPU_REG,
|
|
SUN50I_H6_PLL_VIDEO0_REG,
|
|
SUN50I_H6_PLL_VIDEO1_REG,
|
|
SUN50I_H6_PLL_VE_REG,
|
|
SUN50I_H6_PLL_DE_REG,
|
|
SUN50I_H6_PLL_HSIC_REG,
|
|
SUN50I_H6_PLL_AUDIO_REG,
|
|
};
|
|
|
|
static const u32 pll_video_regs[] = {
|
|
SUN50I_H6_PLL_VIDEO0_REG,
|
|
SUN50I_H6_PLL_VIDEO1_REG,
|
|
};
|
|
|
|
static const u32 usb2_clk_regs[] = {
|
|
SUN50I_H6_USB0_CLK_REG,
|
|
SUN50I_H6_USB3_CLK_REG,
|
|
};
|
|
|
|
static int sun50i_h6_ccu_probe(struct platform_device *pdev)
|
|
{
|
|
struct resource *res;
|
|
void __iomem *reg;
|
|
u32 val;
|
|
int i;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
reg = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(reg))
|
|
return PTR_ERR(reg);
|
|
|
|
/* Enable the lock bits on all PLLs */
|
|
for (i = 0; i < ARRAY_SIZE(pll_regs); i++) {
|
|
val = readl(reg + pll_regs[i]);
|
|
val |= BIT(29);
|
|
writel(val, reg + pll_regs[i]);
|
|
}
|
|
|
|
/*
|
|
* Force the output divider of video PLLs to 0.
|
|
*
|
|
* See the comment before pll-video0 definition for the reason.
|
|
*/
|
|
for (i = 0; i < ARRAY_SIZE(pll_video_regs); i++) {
|
|
val = readl(reg + pll_video_regs[i]);
|
|
val &= ~BIT(0);
|
|
writel(val, reg + pll_video_regs[i]);
|
|
}
|
|
|
|
/*
|
|
* Force OHCI 12M clock sources to 00 (12MHz divided from 48MHz)
|
|
*
|
|
* This clock mux is still mysterious, and the code just enforces
|
|
* it to have a valid clock parent.
|
|
*/
|
|
for (i = 0; i < ARRAY_SIZE(usb2_clk_regs); i++) {
|
|
val = readl(reg + usb2_clk_regs[i]);
|
|
val &= ~GENMASK(25, 24);
|
|
writel (val, reg + usb2_clk_regs[i]);
|
|
}
|
|
|
|
/*
|
|
* Force the post-divider of pll-audio to 12 and the output divider
|
|
* of it to 2, so 24576000 and 22579200 rates can be set exactly.
|
|
*/
|
|
val = readl(reg + SUN50I_H6_PLL_AUDIO_REG);
|
|
val &= ~(GENMASK(21, 16) | BIT(0));
|
|
writel(val | (11 << 16) | BIT(0), reg + SUN50I_H6_PLL_AUDIO_REG);
|
|
|
|
/*
|
|
* First clock parent (osc32K) is unusable for CEC. But since there
|
|
* is no good way to force parent switch (both run with same frequency),
|
|
* just set second clock parent here.
|
|
*/
|
|
val = readl(reg + SUN50I_H6_HDMI_CEC_CLK_REG);
|
|
val |= BIT(24);
|
|
writel(val, reg + SUN50I_H6_HDMI_CEC_CLK_REG);
|
|
|
|
return sunxi_ccu_probe(pdev->dev.of_node, reg, &sun50i_h6_ccu_desc);
|
|
}
|
|
|
|
static const struct of_device_id sun50i_h6_ccu_ids[] = {
|
|
{ .compatible = "allwinner,sun50i-h6-ccu" },
|
|
{ }
|
|
};
|
|
|
|
static struct platform_driver sun50i_h6_ccu_driver = {
|
|
.probe = sun50i_h6_ccu_probe,
|
|
.driver = {
|
|
.name = "sun50i-h6-ccu",
|
|
.of_match_table = sun50i_h6_ccu_ids,
|
|
},
|
|
};
|
|
builtin_platform_driver(sun50i_h6_ccu_driver);
|