forked from Minki/linux
ac67b07e26
Currently, the aspeed-sgpio driver exposes up to 80 GPIO lines,
corresponding to the 80 status bits available in hardware. Each of these
lines can be configured as either an input or an output.
However, each of these GPIOs is actually an input *and* an output; we
actually have 80 inputs plus 80 outputs.
This change expands the maximum number of GPIOs to 160; the lower half
of this range are the input-only GPIOs, the upper half are the outputs.
We fix the GPIO directions to correspond to this mapping.
This also fixes a bug when setting GPIOs - we were reading from the
input register, making it impossible to set more than one output GPIO.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Fixes: 7db47faae7
("gpio: aspeed: Add SGPIO driver")
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
576 lines
14 KiB
C
576 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Copyright 2019 American Megatrends International LLC.
|
|
*
|
|
* Author: Karthikeyan Mani <karthikeyanm@amiindia.co.in>
|
|
*/
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/hashtable.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/string.h>
|
|
|
|
/*
|
|
* MAX_NR_HW_GPIO represents the number of actual hardware-supported GPIOs (ie,
|
|
* slots within the clocked serial GPIO data). Since each HW GPIO is both an
|
|
* input and an output, we provide MAX_NR_HW_GPIO * 2 lines on our gpiochip
|
|
* device.
|
|
*
|
|
* We use SGPIO_OUTPUT_OFFSET to define the split between the inputs and
|
|
* outputs; the inputs start at line 0, the outputs start at OUTPUT_OFFSET.
|
|
*/
|
|
#define MAX_NR_HW_SGPIO 80
|
|
#define SGPIO_OUTPUT_OFFSET MAX_NR_HW_SGPIO
|
|
|
|
#define ASPEED_SGPIO_CTRL 0x54
|
|
|
|
#define ASPEED_SGPIO_PINS_MASK GENMASK(9, 6)
|
|
#define ASPEED_SGPIO_CLK_DIV_MASK GENMASK(31, 16)
|
|
#define ASPEED_SGPIO_ENABLE BIT(0)
|
|
|
|
struct aspeed_sgpio {
|
|
struct gpio_chip chip;
|
|
struct clk *pclk;
|
|
spinlock_t lock;
|
|
void __iomem *base;
|
|
int irq;
|
|
int n_sgpio;
|
|
};
|
|
|
|
struct aspeed_sgpio_bank {
|
|
uint16_t val_regs;
|
|
uint16_t rdata_reg;
|
|
uint16_t irq_regs;
|
|
const char names[4][3];
|
|
};
|
|
|
|
/*
|
|
* Note: The "value" register returns the input value when the GPIO is
|
|
* configured as an input.
|
|
*
|
|
* The "rdata" register returns the output value when the GPIO is
|
|
* configured as an output.
|
|
*/
|
|
static const struct aspeed_sgpio_bank aspeed_sgpio_banks[] = {
|
|
{
|
|
.val_regs = 0x0000,
|
|
.rdata_reg = 0x0070,
|
|
.irq_regs = 0x0004,
|
|
.names = { "A", "B", "C", "D" },
|
|
},
|
|
{
|
|
.val_regs = 0x001C,
|
|
.rdata_reg = 0x0074,
|
|
.irq_regs = 0x0020,
|
|
.names = { "E", "F", "G", "H" },
|
|
},
|
|
{
|
|
.val_regs = 0x0038,
|
|
.rdata_reg = 0x0078,
|
|
.irq_regs = 0x003C,
|
|
.names = { "I", "J" },
|
|
},
|
|
};
|
|
|
|
enum aspeed_sgpio_reg {
|
|
reg_val,
|
|
reg_rdata,
|
|
reg_irq_enable,
|
|
reg_irq_type0,
|
|
reg_irq_type1,
|
|
reg_irq_type2,
|
|
reg_irq_status,
|
|
};
|
|
|
|
#define GPIO_VAL_VALUE 0x00
|
|
#define GPIO_IRQ_ENABLE 0x00
|
|
#define GPIO_IRQ_TYPE0 0x04
|
|
#define GPIO_IRQ_TYPE1 0x08
|
|
#define GPIO_IRQ_TYPE2 0x0C
|
|
#define GPIO_IRQ_STATUS 0x10
|
|
|
|
static void __iomem *bank_reg(struct aspeed_sgpio *gpio,
|
|
const struct aspeed_sgpio_bank *bank,
|
|
const enum aspeed_sgpio_reg reg)
|
|
{
|
|
switch (reg) {
|
|
case reg_val:
|
|
return gpio->base + bank->val_regs + GPIO_VAL_VALUE;
|
|
case reg_rdata:
|
|
return gpio->base + bank->rdata_reg;
|
|
case reg_irq_enable:
|
|
return gpio->base + bank->irq_regs + GPIO_IRQ_ENABLE;
|
|
case reg_irq_type0:
|
|
return gpio->base + bank->irq_regs + GPIO_IRQ_TYPE0;
|
|
case reg_irq_type1:
|
|
return gpio->base + bank->irq_regs + GPIO_IRQ_TYPE1;
|
|
case reg_irq_type2:
|
|
return gpio->base + bank->irq_regs + GPIO_IRQ_TYPE2;
|
|
case reg_irq_status:
|
|
return gpio->base + bank->irq_regs + GPIO_IRQ_STATUS;
|
|
default:
|
|
/* acturally if code runs to here, it's an error case */
|
|
BUG();
|
|
}
|
|
}
|
|
|
|
#define GPIO_BANK(x) ((x % SGPIO_OUTPUT_OFFSET) >> 5)
|
|
#define GPIO_OFFSET(x) ((x % SGPIO_OUTPUT_OFFSET) & 0x1f)
|
|
#define GPIO_BIT(x) BIT(GPIO_OFFSET(x))
|
|
|
|
static const struct aspeed_sgpio_bank *to_bank(unsigned int offset)
|
|
{
|
|
unsigned int bank;
|
|
|
|
bank = GPIO_BANK(offset);
|
|
|
|
WARN_ON(bank >= ARRAY_SIZE(aspeed_sgpio_banks));
|
|
return &aspeed_sgpio_banks[bank];
|
|
}
|
|
|
|
static int aspeed_sgpio_init_valid_mask(struct gpio_chip *gc,
|
|
unsigned long *valid_mask, unsigned int ngpios)
|
|
{
|
|
struct aspeed_sgpio *sgpio = gpiochip_get_data(gc);
|
|
int n = sgpio->n_sgpio;
|
|
int c = SGPIO_OUTPUT_OFFSET - n;
|
|
|
|
WARN_ON(ngpios < MAX_NR_HW_SGPIO * 2);
|
|
|
|
/* input GPIOs in the lower range */
|
|
bitmap_set(valid_mask, 0, n);
|
|
bitmap_clear(valid_mask, n, c);
|
|
|
|
/* output GPIOS above SGPIO_OUTPUT_OFFSET */
|
|
bitmap_set(valid_mask, SGPIO_OUTPUT_OFFSET, n);
|
|
bitmap_clear(valid_mask, SGPIO_OUTPUT_OFFSET + n, c);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void aspeed_sgpio_irq_init_valid_mask(struct gpio_chip *gc,
|
|
unsigned long *valid_mask, unsigned int ngpios)
|
|
{
|
|
struct aspeed_sgpio *sgpio = gpiochip_get_data(gc);
|
|
int n = sgpio->n_sgpio;
|
|
|
|
WARN_ON(ngpios < MAX_NR_HW_SGPIO * 2);
|
|
|
|
/* input GPIOs in the lower range */
|
|
bitmap_set(valid_mask, 0, n);
|
|
bitmap_clear(valid_mask, n, ngpios - n);
|
|
}
|
|
|
|
static bool aspeed_sgpio_is_input(unsigned int offset)
|
|
{
|
|
return offset < SGPIO_OUTPUT_OFFSET;
|
|
}
|
|
|
|
static int aspeed_sgpio_get(struct gpio_chip *gc, unsigned int offset)
|
|
{
|
|
struct aspeed_sgpio *gpio = gpiochip_get_data(gc);
|
|
const struct aspeed_sgpio_bank *bank = to_bank(offset);
|
|
unsigned long flags;
|
|
enum aspeed_sgpio_reg reg;
|
|
int rc = 0;
|
|
|
|
spin_lock_irqsave(&gpio->lock, flags);
|
|
|
|
reg = aspeed_sgpio_is_input(offset) ? reg_val : reg_rdata;
|
|
rc = !!(ioread32(bank_reg(gpio, bank, reg)) & GPIO_BIT(offset));
|
|
|
|
spin_unlock_irqrestore(&gpio->lock, flags);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int sgpio_set_value(struct gpio_chip *gc, unsigned int offset, int val)
|
|
{
|
|
struct aspeed_sgpio *gpio = gpiochip_get_data(gc);
|
|
const struct aspeed_sgpio_bank *bank = to_bank(offset);
|
|
void __iomem *addr_r, *addr_w;
|
|
u32 reg = 0;
|
|
|
|
if (aspeed_sgpio_is_input(offset))
|
|
return -EINVAL;
|
|
|
|
/* Since this is an output, read the cached value from rdata, then
|
|
* update val. */
|
|
addr_r = bank_reg(gpio, bank, reg_rdata);
|
|
addr_w = bank_reg(gpio, bank, reg_val);
|
|
|
|
reg = ioread32(addr_r);
|
|
|
|
if (val)
|
|
reg |= GPIO_BIT(offset);
|
|
else
|
|
reg &= ~GPIO_BIT(offset);
|
|
|
|
iowrite32(reg, addr_w);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void aspeed_sgpio_set(struct gpio_chip *gc, unsigned int offset, int val)
|
|
{
|
|
struct aspeed_sgpio *gpio = gpiochip_get_data(gc);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&gpio->lock, flags);
|
|
|
|
sgpio_set_value(gc, offset, val);
|
|
|
|
spin_unlock_irqrestore(&gpio->lock, flags);
|
|
}
|
|
|
|
static int aspeed_sgpio_dir_in(struct gpio_chip *gc, unsigned int offset)
|
|
{
|
|
return aspeed_sgpio_is_input(offset) ? 0 : -EINVAL;
|
|
}
|
|
|
|
static int aspeed_sgpio_dir_out(struct gpio_chip *gc, unsigned int offset, int val)
|
|
{
|
|
struct aspeed_sgpio *gpio = gpiochip_get_data(gc);
|
|
unsigned long flags;
|
|
int rc;
|
|
|
|
/* No special action is required for setting the direction; we'll
|
|
* error-out in sgpio_set_value if this isn't an output GPIO */
|
|
|
|
spin_lock_irqsave(&gpio->lock, flags);
|
|
rc = sgpio_set_value(gc, offset, val);
|
|
spin_unlock_irqrestore(&gpio->lock, flags);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int aspeed_sgpio_get_direction(struct gpio_chip *gc, unsigned int offset)
|
|
{
|
|
return !!aspeed_sgpio_is_input(offset);
|
|
}
|
|
|
|
static void irqd_to_aspeed_sgpio_data(struct irq_data *d,
|
|
struct aspeed_sgpio **gpio,
|
|
const struct aspeed_sgpio_bank **bank,
|
|
u32 *bit, int *offset)
|
|
{
|
|
struct aspeed_sgpio *internal;
|
|
|
|
*offset = irqd_to_hwirq(d);
|
|
internal = irq_data_get_irq_chip_data(d);
|
|
WARN_ON(!internal);
|
|
|
|
*gpio = internal;
|
|
*bank = to_bank(*offset);
|
|
*bit = GPIO_BIT(*offset);
|
|
}
|
|
|
|
static void aspeed_sgpio_irq_ack(struct irq_data *d)
|
|
{
|
|
const struct aspeed_sgpio_bank *bank;
|
|
struct aspeed_sgpio *gpio;
|
|
unsigned long flags;
|
|
void __iomem *status_addr;
|
|
int offset;
|
|
u32 bit;
|
|
|
|
irqd_to_aspeed_sgpio_data(d, &gpio, &bank, &bit, &offset);
|
|
|
|
status_addr = bank_reg(gpio, bank, reg_irq_status);
|
|
|
|
spin_lock_irqsave(&gpio->lock, flags);
|
|
|
|
iowrite32(bit, status_addr);
|
|
|
|
spin_unlock_irqrestore(&gpio->lock, flags);
|
|
}
|
|
|
|
static void aspeed_sgpio_irq_set_mask(struct irq_data *d, bool set)
|
|
{
|
|
const struct aspeed_sgpio_bank *bank;
|
|
struct aspeed_sgpio *gpio;
|
|
unsigned long flags;
|
|
u32 reg, bit;
|
|
void __iomem *addr;
|
|
int offset;
|
|
|
|
irqd_to_aspeed_sgpio_data(d, &gpio, &bank, &bit, &offset);
|
|
addr = bank_reg(gpio, bank, reg_irq_enable);
|
|
|
|
spin_lock_irqsave(&gpio->lock, flags);
|
|
|
|
reg = ioread32(addr);
|
|
if (set)
|
|
reg |= bit;
|
|
else
|
|
reg &= ~bit;
|
|
|
|
iowrite32(reg, addr);
|
|
|
|
spin_unlock_irqrestore(&gpio->lock, flags);
|
|
}
|
|
|
|
static void aspeed_sgpio_irq_mask(struct irq_data *d)
|
|
{
|
|
aspeed_sgpio_irq_set_mask(d, false);
|
|
}
|
|
|
|
static void aspeed_sgpio_irq_unmask(struct irq_data *d)
|
|
{
|
|
aspeed_sgpio_irq_set_mask(d, true);
|
|
}
|
|
|
|
static int aspeed_sgpio_set_type(struct irq_data *d, unsigned int type)
|
|
{
|
|
u32 type0 = 0;
|
|
u32 type1 = 0;
|
|
u32 type2 = 0;
|
|
u32 bit, reg;
|
|
const struct aspeed_sgpio_bank *bank;
|
|
irq_flow_handler_t handler;
|
|
struct aspeed_sgpio *gpio;
|
|
unsigned long flags;
|
|
void __iomem *addr;
|
|
int offset;
|
|
|
|
irqd_to_aspeed_sgpio_data(d, &gpio, &bank, &bit, &offset);
|
|
|
|
switch (type & IRQ_TYPE_SENSE_MASK) {
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
type2 |= bit;
|
|
/* fall through */
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
type0 |= bit;
|
|
/* fall through */
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
handler = handle_edge_irq;
|
|
break;
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
type0 |= bit;
|
|
/* fall through */
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
type1 |= bit;
|
|
handler = handle_level_irq;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
spin_lock_irqsave(&gpio->lock, flags);
|
|
|
|
addr = bank_reg(gpio, bank, reg_irq_type0);
|
|
reg = ioread32(addr);
|
|
reg = (reg & ~bit) | type0;
|
|
iowrite32(reg, addr);
|
|
|
|
addr = bank_reg(gpio, bank, reg_irq_type1);
|
|
reg = ioread32(addr);
|
|
reg = (reg & ~bit) | type1;
|
|
iowrite32(reg, addr);
|
|
|
|
addr = bank_reg(gpio, bank, reg_irq_type2);
|
|
reg = ioread32(addr);
|
|
reg = (reg & ~bit) | type2;
|
|
iowrite32(reg, addr);
|
|
|
|
spin_unlock_irqrestore(&gpio->lock, flags);
|
|
|
|
irq_set_handler_locked(d, handler);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void aspeed_sgpio_irq_handler(struct irq_desc *desc)
|
|
{
|
|
struct gpio_chip *gc = irq_desc_get_handler_data(desc);
|
|
struct irq_chip *ic = irq_desc_get_chip(desc);
|
|
struct aspeed_sgpio *data = gpiochip_get_data(gc);
|
|
unsigned int i, p, girq;
|
|
unsigned long reg;
|
|
|
|
chained_irq_enter(ic, desc);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(aspeed_sgpio_banks); i++) {
|
|
const struct aspeed_sgpio_bank *bank = &aspeed_sgpio_banks[i];
|
|
|
|
reg = ioread32(bank_reg(data, bank, reg_irq_status));
|
|
|
|
for_each_set_bit(p, ®, 32) {
|
|
girq = irq_find_mapping(gc->irq.domain, i * 32 + p);
|
|
generic_handle_irq(girq);
|
|
}
|
|
|
|
}
|
|
|
|
chained_irq_exit(ic, desc);
|
|
}
|
|
|
|
static struct irq_chip aspeed_sgpio_irqchip = {
|
|
.name = "aspeed-sgpio",
|
|
.irq_ack = aspeed_sgpio_irq_ack,
|
|
.irq_mask = aspeed_sgpio_irq_mask,
|
|
.irq_unmask = aspeed_sgpio_irq_unmask,
|
|
.irq_set_type = aspeed_sgpio_set_type,
|
|
};
|
|
|
|
static int aspeed_sgpio_setup_irqs(struct aspeed_sgpio *gpio,
|
|
struct platform_device *pdev)
|
|
{
|
|
int rc, i;
|
|
const struct aspeed_sgpio_bank *bank;
|
|
struct gpio_irq_chip *irq;
|
|
|
|
rc = platform_get_irq(pdev, 0);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
gpio->irq = rc;
|
|
|
|
/* Disable IRQ and clear Interrupt status registers for all SGPIO Pins. */
|
|
for (i = 0; i < ARRAY_SIZE(aspeed_sgpio_banks); i++) {
|
|
bank = &aspeed_sgpio_banks[i];
|
|
/* disable irq enable bits */
|
|
iowrite32(0x00000000, bank_reg(gpio, bank, reg_irq_enable));
|
|
/* clear status bits */
|
|
iowrite32(0xffffffff, bank_reg(gpio, bank, reg_irq_status));
|
|
}
|
|
|
|
irq = &gpio->chip.irq;
|
|
irq->chip = &aspeed_sgpio_irqchip;
|
|
irq->init_valid_mask = aspeed_sgpio_irq_init_valid_mask;
|
|
irq->handler = handle_bad_irq;
|
|
irq->default_type = IRQ_TYPE_NONE;
|
|
irq->parent_handler = aspeed_sgpio_irq_handler;
|
|
irq->parent_handler_data = gpio;
|
|
irq->parents = &gpio->irq;
|
|
irq->num_parents = 1;
|
|
|
|
/* set IRQ settings and Enable Interrupt */
|
|
for (i = 0; i < ARRAY_SIZE(aspeed_sgpio_banks); i++) {
|
|
bank = &aspeed_sgpio_banks[i];
|
|
/* set falling or level-low irq */
|
|
iowrite32(0x00000000, bank_reg(gpio, bank, reg_irq_type0));
|
|
/* trigger type is edge */
|
|
iowrite32(0x00000000, bank_reg(gpio, bank, reg_irq_type1));
|
|
/* dual edge trigger mode. */
|
|
iowrite32(0xffffffff, bank_reg(gpio, bank, reg_irq_type2));
|
|
/* enable irq */
|
|
iowrite32(0xffffffff, bank_reg(gpio, bank, reg_irq_enable));
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id aspeed_sgpio_of_table[] = {
|
|
{ .compatible = "aspeed,ast2400-sgpio" },
|
|
{ .compatible = "aspeed,ast2500-sgpio" },
|
|
{}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, aspeed_sgpio_of_table);
|
|
|
|
static int __init aspeed_sgpio_probe(struct platform_device *pdev)
|
|
{
|
|
struct aspeed_sgpio *gpio;
|
|
u32 nr_gpios, sgpio_freq, sgpio_clk_div;
|
|
int rc;
|
|
unsigned long apb_freq;
|
|
|
|
gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
|
|
if (!gpio)
|
|
return -ENOMEM;
|
|
|
|
gpio->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(gpio->base))
|
|
return PTR_ERR(gpio->base);
|
|
|
|
rc = of_property_read_u32(pdev->dev.of_node, "ngpios", &nr_gpios);
|
|
if (rc < 0) {
|
|
dev_err(&pdev->dev, "Could not read ngpios property\n");
|
|
return -EINVAL;
|
|
} else if (nr_gpios > MAX_NR_HW_SGPIO) {
|
|
dev_err(&pdev->dev, "Number of GPIOs exceeds the maximum of %d: %d\n",
|
|
MAX_NR_HW_SGPIO, nr_gpios);
|
|
return -EINVAL;
|
|
}
|
|
gpio->n_sgpio = nr_gpios;
|
|
|
|
rc = of_property_read_u32(pdev->dev.of_node, "bus-frequency", &sgpio_freq);
|
|
if (rc < 0) {
|
|
dev_err(&pdev->dev, "Could not read bus-frequency property\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
gpio->pclk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(gpio->pclk)) {
|
|
dev_err(&pdev->dev, "devm_clk_get failed\n");
|
|
return PTR_ERR(gpio->pclk);
|
|
}
|
|
|
|
apb_freq = clk_get_rate(gpio->pclk);
|
|
|
|
/*
|
|
* From the datasheet,
|
|
* SGPIO period = 1/PCLK * 2 * (GPIO254[31:16] + 1)
|
|
* period = 2 * (GPIO254[31:16] + 1) / PCLK
|
|
* frequency = 1 / (2 * (GPIO254[31:16] + 1) / PCLK)
|
|
* frequency = PCLK / (2 * (GPIO254[31:16] + 1))
|
|
* frequency * 2 * (GPIO254[31:16] + 1) = PCLK
|
|
* GPIO254[31:16] = PCLK / (frequency * 2) - 1
|
|
*/
|
|
if (sgpio_freq == 0)
|
|
return -EINVAL;
|
|
|
|
sgpio_clk_div = (apb_freq / (sgpio_freq * 2)) - 1;
|
|
|
|
if (sgpio_clk_div > (1 << 16) - 1)
|
|
return -EINVAL;
|
|
|
|
iowrite32(FIELD_PREP(ASPEED_SGPIO_CLK_DIV_MASK, sgpio_clk_div) |
|
|
FIELD_PREP(ASPEED_SGPIO_PINS_MASK, (nr_gpios / 8)) |
|
|
ASPEED_SGPIO_ENABLE,
|
|
gpio->base + ASPEED_SGPIO_CTRL);
|
|
|
|
spin_lock_init(&gpio->lock);
|
|
|
|
gpio->chip.parent = &pdev->dev;
|
|
gpio->chip.ngpio = MAX_NR_HW_SGPIO * 2;
|
|
gpio->chip.init_valid_mask = aspeed_sgpio_init_valid_mask;
|
|
gpio->chip.direction_input = aspeed_sgpio_dir_in;
|
|
gpio->chip.direction_output = aspeed_sgpio_dir_out;
|
|
gpio->chip.get_direction = aspeed_sgpio_get_direction;
|
|
gpio->chip.request = NULL;
|
|
gpio->chip.free = NULL;
|
|
gpio->chip.get = aspeed_sgpio_get;
|
|
gpio->chip.set = aspeed_sgpio_set;
|
|
gpio->chip.set_config = NULL;
|
|
gpio->chip.label = dev_name(&pdev->dev);
|
|
gpio->chip.base = -1;
|
|
|
|
aspeed_sgpio_setup_irqs(gpio, pdev);
|
|
|
|
rc = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver aspeed_sgpio_driver = {
|
|
.driver = {
|
|
.name = KBUILD_MODNAME,
|
|
.of_match_table = aspeed_sgpio_of_table,
|
|
},
|
|
};
|
|
|
|
module_platform_driver_probe(aspeed_sgpio_driver, aspeed_sgpio_probe);
|
|
MODULE_DESCRIPTION("Aspeed Serial GPIO Driver");
|
|
MODULE_LICENSE("GPL");
|