leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
ac363cf9eb
linux/net
History
Szymon Janc ac363cf9eb Bluetooth: Fix sending Read Remote Extended Features command 
This command should only be used if remote device reports that it
supports extended features. Otherwise command will fail and connection
will be dropped.

Some devices support SSP but don't support extended features so
current check for SSP support is not enought.

Instead of checking for SSP support just check if both ends support
Extended Feature.

< HCI Command: Create Connection (0x01|0x0005) plen 13
        Address: D0:9C:30:00:19:6F (Foster Electric Company, Limited)
        Packet type: 0xcc18
          DM1 may be used
          DH1 may be used
          DM3 may be used
          DH3 may be used
          DM5 may be used
          DH5 may be used
        Page scan repetition mode: R1 (0x01)
        Page scan mode: Mandatory (0x00)
        Clock offset: 0x94c8
        Role switch: Allow slave (0x01)
> HCI Event: Command Status (0x0f) plen 4
      Create Connection (0x01|0x0005) ncmd 1
        Status: Success (0x00)
> HCI Event: Connect Complete (0x03) plen 11
        Status: Success (0x00)
        Handle: 5
        Address: D0:9C:30:00:19:6F (Foster Electric Company, Limited)
        Link type: ACL (0x01)
        Encryption: Disabled (0x00)
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
        Handle: 5
> HCI Event: Command Status (0x0f) plen 4
      Read Remote Supported Features (0x01|0x001b) ncmd 1
        Status: Success (0x00)
> HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
        Address: D0:9C:30:00:19:6F (Foster Electric Company, Limited)
        Page scan repetition mode: R1 (0x01)
> HCI Event: Read Remote Supported Features (0x0b) plen 11
        Status: Success (0x00)
        Handle: 5
        Features: 0xff 0xff 0x8f 0xfe 0xdb 0xff 0x5b 0x07
          3 slot packets
          5 slot packets
          Encryption
          Slot offset
          Timing accuracy
          Role switch
          Hold mode
          Sniff mode
          Park state
          Power control requests
          Channel quality driven data rate (CQDDR)
          SCO link
          HV2 packets
          HV3 packets
          u-law log synchronous data
          A-law log synchronous data
          CVSD synchronous data
          Paging parameter negotiation
          Power control
          Transparent synchronous data
          Broadcast Encryption
          Enhanced Data Rate ACL 2 Mbps mode
          Enhanced Data Rate ACL 3 Mbps mode
          Enhanced inquiry scan
          Interlaced inquiry scan
          Interlaced page scan
          RSSI with inquiry results
          Extended SCO link (EV3 packets)
          EV4 packets
          EV5 packets
          AFH capable slave
          AFH classification slave
          LE Supported (Controller)
          3-slot Enhanced Data Rate ACL packets
          5-slot Enhanced Data Rate ACL packets
          Sniff subrating
          Pause encryption
          AFH capable master
          AFH classification master
          Enhanced Data Rate eSCO 2 Mbps mode
          Enhanced Data Rate eSCO 3 Mbps mode
          3-slot Enhanced Data Rate eSCO packets
          Extended Inquiry Response
          Simultaneous LE and BR/EDR (Controller)
          Secure Simple Pairing
          Encapsulated PDU
          Non-flushable Packet Boundary Flag
          Link Supervision Timeout Changed Event
          Inquiry TX Power Level
          Enhanced Power Control
< HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3
        Handle: 5
        Page: 1
> HCI Event: Command Status (0x0f) plen 4
      Read Remote Extended Features (0x01|0x001c) ncmd 1
        Status: Command Disallowed (0x0c)
< HCI Command: Read Clock Offset (0x01|0x001f) plen 2
        Handle: 5
> HCI Event: Command Status (0x0f) plen 4
      Read Clock Offset (0x01|0x001f) ncmd 1
        Status: Success (0x00)
< HCI Command: Disconnect (0x01|0x0006) plen 3
        Handle: 5
        Reason: Remote User Terminated Connection (0x13)

Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-01-29 16:59:53 +01:00
..
6lowpan net/6lowpan: Remove FSF address from GPL statement. 2014-12-05 12:43:04 +01:00
9p
802
8021q net: rename vlan_tx_* helpers since "tx" is misleading there 2015-01-13 17:51:08 -05:00
appletalk new helper: memcpy_from_msg() 2014-11-24 04:28:48 -05:00
atm put iov_iter into msghdr 2014-12-09 16:29:03 -05:00
ax25 new helper: memcpy_from_msg() 2014-11-24 04:28:48 -05:00
batman-adv batman-adv: Kconfig, Add missing DEBUG_FS dependency 2015-01-07 22:17:11 +01:00
bluetooth Bluetooth: Fix sending Read Remote Extended Features command 2015-01-29 16:59:53 +01:00
bridge net: bridge: reject DSA-enabled master netdevices as bridge members 2015-01-19 15:45:10 -05:00
caif put iov_iter into msghdr 2014-12-09 16:29:03 -05:00
can netlink: make nlmsg_end() and genlmsg_end() void 2015-01-18 01:03:45 -05:00
ceph libceph: fix sparse endianness warnings 2015-01-08 20:36:57 +03:00
core rtnl: allow to create device with IFLA_LINK_NETNSID set 2015-01-19 14:32:03 -05:00
dcb dcbnl : Disable software interrupts before taking dcb_lock 2014-11-16 14:50:52 -05:00
dccp net: introduce helper macro for_each_cmsghdr 2014-12-10 22:41:55 -05:00
decnet netlink: Fix bugs in nlmsg_end() conversions. 2015-01-18 23:36:08 -05:00
dns_resolver
dsa Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
ethernet net: Add Transparent Ethernet Bridging GRO support. 2015-01-02 15:46:41 -05:00
hsr
ieee802154 netlink: make nlmsg_end() and genlmsg_end() void 2015-01-18 01:03:45 -05:00
ipv4 net: ipv4: handle DSA enabled master network devices 2015-01-19 15:45:10 -05:00
ipv6 tunnels: advertise link netns via netlink 2015-01-19 14:32:03 -05:00
ipx switch ipxrtr_route_packet() from iovec to msghdr 2014-11-24 04:28:49 -05:00
irda irda: Convert function pointer arrays and uses to const 2014-12-10 15:33:16 -05:00
iucv net: introduce helper macro for_each_cmsghdr 2014-12-10 22:41:55 -05:00
key new helper: memcpy_from_msg() 2014-11-24 04:28:48 -05:00
l2tp netlink: make nlmsg_end() and genlmsg_end() void 2015-01-18 01:03:45 -05:00
lapb
llc llc: Make llc_sap_action_t function pointer arrays const 2014-12-10 15:21:24 -05:00
mac80211 mac80211: delete the assoc/auth timer upon suspend 2015-01-19 18:59:20 +01:00
mac802154 mac802154: fix kbuild test robot warning 2015-01-03 01:51:51 +01:00
mpls mpls: Fix allowed protocols for mpls gso 2014-12-23 23:57:31 -05:00
netfilter netlink: make nlmsg_end() and genlmsg_end() void 2015-01-18 01:03:45 -05:00
netlabel netlink: make nlmsg_end() and genlmsg_end() void 2015-01-18 01:03:45 -05:00
netlink netlink: make nlmsg_end() and genlmsg_end() void 2015-01-18 01:03:45 -05:00
netrom new helper: memcpy_from_msg() 2014-11-24 04:28:48 -05:00
nfc netlink: make nlmsg_end() and genlmsg_end() void 2015-01-18 01:03:45 -05:00
openvswitch netlink: make nlmsg_end() and genlmsg_end() void 2015-01-18 01:03:45 -05:00
packet netlink: make nlmsg_end() and genlmsg_end() void 2015-01-18 01:03:45 -05:00
phonet phonet netlink: allow multiple messages per skb in route dump 2015-01-19 16:20:17 -05:00
rds rds: Fix min() warning in rds_message_inc_copy_to_user() 2014-12-15 11:49:09 -05:00
rfkill Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
rose new helper: memcpy_from_msg() 2014-11-24 04:28:48 -05:00
rxrpc net: introduce helper macro for_each_cmsghdr 2014-12-10 22:41:55 -05:00
sched net: sched: Introduce connmark action 2015-01-19 16:02:06 -05:00
sctp net: introduce helper macro for_each_cmsghdr 2014-12-10 22:41:55 -05:00
sunrpc rpc: fix xdr_truncate_encode to handle buffer ending on page boundary 2015-01-07 14:03:58 -05:00
switchdev switchdev: introduce switchdev notifier 2015-01-18 00:23:57 -05:00
tipc tipc: fix socket list regression in new nl api 2015-01-18 00:27:05 -05:00
unix netlink: make nlmsg_end() and genlmsg_end() void 2015-01-18 01:03:45 -05:00
vmw_vsock put iov_iter into msghdr 2014-12-09 16:29:03 -05:00
wimax
wireless Some further updates for net-next: 2015-01-19 16:22:19 -05:00
x25 new helper: memcpy_from_msg() 2014-11-24 04:28:48 -05:00
xfrm netlink: make nlmsg_end() and genlmsg_end() void 2015-01-18 01:03:45 -05:00
compat.c put iov_iter into msghdr 2014-12-09 16:29:03 -05:00
Kconfig net: introduce generic switch devices support 2014-12-02 20:01:20 -08:00
Makefile Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs 2014-12-16 15:53:03 -08:00
socket.c socket: use ki_nbytes instead of iov_length() 2015-01-17 23:58:37 -05:00
sysctl_net.c