linux/drivers/pinctrl
David Cohen d90c338189 pinctrl: baytrail: show output gpio state correctly on Intel Baytrail
Even if a gpio pin is set to output, we still need to set INPUT_EN
functionality (by clearing INPUT_EN bit) to be able to read the pin's
level.

E.g. without this change, we'll always read low level state from sysfs.

Cc: <stable@vger.kernel.org> # v3.14+
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-28 11:16:26 +01:00
..
berlin pinctrl: berlin: fix the dt_free_map function 2014-09-23 17:01:47 +02:00
freescale pinctrl: imx: detect uninitialized pins 2014-09-23 11:45:47 +02:00
mvebu pinctrl: clean up after enable refactoring 2014-09-04 10:05:07 +02:00
nomadik This is the bulk of GPIO changes for the v3.18 development 2014-10-09 14:58:15 -04:00
qcom This is the bulk of GPIO changes for the v3.18 development 2014-10-09 14:58:15 -04:00
samsung This is the bulk of GPIO changes for the v3.18 development 2014-10-09 14:58:15 -04:00
sh-pfc This is the bulk of pin control changes for the v3.18 2014-10-07 20:56:28 -04:00
sirf This is the bulk of GPIO changes for the v3.18 development 2014-10-09 14:58:15 -04:00
spear pinctrl: clean up after enable refactoring 2014-09-04 10:05:07 +02:00
sunxi pinctrl: clean up after enable refactoring 2014-09-04 10:05:07 +02:00
vt8500 pinctrl: clean up after enable refactoring 2014-09-04 10:05:07 +02:00
core.c pinctrl: avoid duplicated calling enable_pinmux_setting for a pin 2014-07-11 14:08:26 +02:00
core.h
devicetree.c pinctrl: Quiet logging about missing DT nodes when not using DT 2014-02-24 10:44:54 +01:00
devicetree.h
Kconfig This is the bulk of GPIO changes for the v3.18 development 2014-10-09 14:58:15 -04:00
Makefile pinctrl: imx/mxs: move freescale drivers to subdir 2014-09-04 10:05:28 +02:00
pinconf-generic.c pinctrl: Enable "power-source" to be extracted from DT files 2014-05-28 10:16:35 +02:00
pinconf.c
pinconf.h
pinctrl-adi2-bf54x.c pinctrl: pinctrl-adi: combine multiple groups of one function together 2014-02-25 10:49:13 +01:00
pinctrl-adi2-bf60x.c pinctrl: pinctrl-adi: combine multiple groups of one function together 2014-02-25 10:49:13 +01:00
pinctrl-adi2.c pinctrl: adi2: Remove duplicate gpiochip_remove_pin_ranges 2014-09-05 10:33:51 +02:00
pinctrl-adi2.h pinctrl: pinctrl-adi: combine multiple groups of one function together 2014-02-25 10:49:13 +01:00
pinctrl-as3722.c pinctrl: clean up after enable refactoring 2014-09-04 10:05:07 +02:00
pinctrl-at91.c This is the bulk of pin control changes for the v3.18 2014-10-07 20:56:28 -04:00
pinctrl-baytrail.c pinctrl: baytrail: show output gpio state correctly on Intel Baytrail 2014-10-28 11:16:26 +01:00
pinctrl-bcm281xx.c pinctrl: clean up after enable refactoring 2014-09-04 10:05:07 +02:00
pinctrl-bcm2835.c pinctrl: clean up after enable refactoring 2014-09-04 10:05:07 +02:00
pinctrl-coh901.c pinctrl: remove all usage of gpio_remove ret val in driver/pinctl 2014-07-22 16:34:12 +02:00
pinctrl-coh901.h
pinctrl-falcon.c
pinctrl-lantiq.c pinctrl: clean up after enable refactoring 2014-09-04 10:05:07 +02:00
pinctrl-lantiq.h pinctrl: lantiq: Fix header file include guard 2014-04-22 08:41:35 +02:00
pinctrl-palmas.c pinctrl: clean up after enable refactoring 2014-09-04 10:05:07 +02:00
pinctrl-rockchip.c This is the bulk of pin control changes for the v3.18 2014-10-07 20:56:28 -04:00
pinctrl-single.c pinctrl: single: fix freudian slip 2014-09-05 10:33:25 +02:00
pinctrl-st.c pinctrl: st: remove gpiochip in failure cases 2014-09-23 16:53:18 +02:00
pinctrl-tb10x.c pinctrl: clean up after enable refactoring 2014-09-04 10:05:07 +02:00
pinctrl-tegra20.c pinctrl: Make of_device_id array const 2014-08-29 07:13:04 +02:00
pinctrl-tegra30.c pinctrl: Make of_device_id array const 2014-08-29 07:13:04 +02:00
pinctrl-tegra114.c pinctrl: Make of_device_id array const 2014-08-29 07:13:04 +02:00
pinctrl-tegra124.c pinctrl: tegra: Add MIPI pad control 2014-09-19 12:28:54 -05:00
pinctrl-tegra-xusb.c This is the bulk of pin control changes for the v3.18 2014-10-07 20:56:28 -04:00
pinctrl-tegra.c pinctrl: clean up after enable refactoring 2014-09-04 10:05:07 +02:00
pinctrl-tegra.h pinctrl: tegra: add missing kerneldoc 2014-04-22 16:55:41 +02:00
pinctrl-tz1090-pdc.c pinctrl: clean up after enable refactoring 2014-09-04 10:05:07 +02:00
pinctrl-tz1090.c pinctrl: clean up after enable refactoring 2014-09-04 10:05:07 +02:00
pinctrl-u300.c pinctrl: clean up after enable refactoring 2014-09-04 10:05:07 +02:00
pinctrl-utils.c
pinctrl-utils.h
pinctrl-xway.c pinctrl: lantiq: Release gpiochip resources in fail case 2014-09-23 12:23:09 +02:00
pinmux.c pinctrl: clean up after enable refactoring 2014-09-04 10:05:07 +02:00
pinmux.h