forked from Minki/linux
ab725cbec3
The xHCI driver currently has the IMOD set to 160, which
translates to an IMOD interval of 40,000ns (160 * 250)ns
Commit 0cbd4b34cd
("xhci: mediatek: support MTK xHCI host controller")
introduced a QUIRK for the MTK platform to adjust this interval to 20,
which translates to an IMOD interval of 5,000ns (20 * 250)ns. This is
due to the fact that the MTK controller IMOD interval is 8 times
as much as defined in xHCI spec.
Instead of adding more quirk bits for additional platforms, this patch
introduces the ability for vendors to set the IMOD_INTERVAL as is
optimal for their platform. By using device_property_read_u32() on
"imod-interval-ns", the IMOD INTERVAL can be specified in nano seconds.
If no interval is specified, the default of 40,000ns (IMOD=160) will be
used.
No bounds checking has been implemented due to the fact that a vendor
may have violated the spec and would need to specify a value outside of
the max 8,000 IRQs/second limit specified in the xHCI spec.
Tested-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Adam Wallis <awallis@codeaurora.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
844 lines
20 KiB
C
844 lines
20 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* MediaTek xHCI Host Controller Driver
|
|
*
|
|
* Copyright (c) 2015 MediaTek Inc.
|
|
* Author:
|
|
* Chunfeng Yun <chunfeng.yun@mediatek.com>
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
#include "xhci.h"
|
|
#include "xhci-mtk.h"
|
|
|
|
/* ip_pw_ctrl0 register */
|
|
#define CTRL0_IP_SW_RST BIT(0)
|
|
|
|
/* ip_pw_ctrl1 register */
|
|
#define CTRL1_IP_HOST_PDN BIT(0)
|
|
|
|
/* ip_pw_ctrl2 register */
|
|
#define CTRL2_IP_DEV_PDN BIT(0)
|
|
|
|
/* ip_pw_sts1 register */
|
|
#define STS1_IP_SLEEP_STS BIT(30)
|
|
#define STS1_U3_MAC_RST BIT(16)
|
|
#define STS1_XHCI_RST BIT(11)
|
|
#define STS1_SYS125_RST BIT(10)
|
|
#define STS1_REF_RST BIT(8)
|
|
#define STS1_SYSPLL_STABLE BIT(0)
|
|
|
|
/* ip_xhci_cap register */
|
|
#define CAP_U3_PORT_NUM(p) ((p) & 0xff)
|
|
#define CAP_U2_PORT_NUM(p) (((p) >> 8) & 0xff)
|
|
|
|
/* u3_ctrl_p register */
|
|
#define CTRL_U3_PORT_HOST_SEL BIT(2)
|
|
#define CTRL_U3_PORT_PDN BIT(1)
|
|
#define CTRL_U3_PORT_DIS BIT(0)
|
|
|
|
/* u2_ctrl_p register */
|
|
#define CTRL_U2_PORT_HOST_SEL BIT(2)
|
|
#define CTRL_U2_PORT_PDN BIT(1)
|
|
#define CTRL_U2_PORT_DIS BIT(0)
|
|
|
|
/* u2_phy_pll register */
|
|
#define CTRL_U2_FORCE_PLL_STB BIT(28)
|
|
|
|
#define PERI_WK_CTRL0 0x400
|
|
#define UWK_CTR0_0P_LS_PE BIT(8) /* posedge */
|
|
#define UWK_CTR0_0P_LS_NE BIT(7) /* negedge for 0p linestate*/
|
|
#define UWK_CTL1_1P_LS_C(x) (((x) & 0xf) << 1)
|
|
#define UWK_CTL1_1P_LS_E BIT(0)
|
|
|
|
#define PERI_WK_CTRL1 0x404
|
|
#define UWK_CTL1_IS_C(x) (((x) & 0xf) << 26)
|
|
#define UWK_CTL1_IS_E BIT(25)
|
|
#define UWK_CTL1_0P_LS_C(x) (((x) & 0xf) << 21)
|
|
#define UWK_CTL1_0P_LS_E BIT(20)
|
|
#define UWK_CTL1_IDDIG_C(x) (((x) & 0xf) << 11) /* cycle debounce */
|
|
#define UWK_CTL1_IDDIG_E BIT(10) /* enable debounce */
|
|
#define UWK_CTL1_IDDIG_P BIT(9) /* polarity */
|
|
#define UWK_CTL1_0P_LS_P BIT(7)
|
|
#define UWK_CTL1_IS_P BIT(6) /* polarity for ip sleep */
|
|
|
|
enum ssusb_wakeup_src {
|
|
SSUSB_WK_IP_SLEEP = 1,
|
|
SSUSB_WK_LINE_STATE = 2,
|
|
};
|
|
|
|
static int xhci_mtk_host_enable(struct xhci_hcd_mtk *mtk)
|
|
{
|
|
struct mu3c_ippc_regs __iomem *ippc = mtk->ippc_regs;
|
|
u32 value, check_val;
|
|
int u3_ports_disabed = 0;
|
|
int ret;
|
|
int i;
|
|
|
|
if (!mtk->has_ippc)
|
|
return 0;
|
|
|
|
/* power on host ip */
|
|
value = readl(&ippc->ip_pw_ctr1);
|
|
value &= ~CTRL1_IP_HOST_PDN;
|
|
writel(value, &ippc->ip_pw_ctr1);
|
|
|
|
/* power on and enable u3 ports except skipped ones */
|
|
for (i = 0; i < mtk->num_u3_ports; i++) {
|
|
if ((0x1 << i) & mtk->u3p_dis_msk) {
|
|
u3_ports_disabed++;
|
|
continue;
|
|
}
|
|
|
|
value = readl(&ippc->u3_ctrl_p[i]);
|
|
value &= ~(CTRL_U3_PORT_PDN | CTRL_U3_PORT_DIS);
|
|
value |= CTRL_U3_PORT_HOST_SEL;
|
|
writel(value, &ippc->u3_ctrl_p[i]);
|
|
}
|
|
|
|
/* power on and enable all u2 ports */
|
|
for (i = 0; i < mtk->num_u2_ports; i++) {
|
|
value = readl(&ippc->u2_ctrl_p[i]);
|
|
value &= ~(CTRL_U2_PORT_PDN | CTRL_U2_PORT_DIS);
|
|
value |= CTRL_U2_PORT_HOST_SEL;
|
|
writel(value, &ippc->u2_ctrl_p[i]);
|
|
}
|
|
|
|
/*
|
|
* wait for clocks to be stable, and clock domains reset to
|
|
* be inactive after power on and enable ports
|
|
*/
|
|
check_val = STS1_SYSPLL_STABLE | STS1_REF_RST |
|
|
STS1_SYS125_RST | STS1_XHCI_RST;
|
|
|
|
if (mtk->num_u3_ports > u3_ports_disabed)
|
|
check_val |= STS1_U3_MAC_RST;
|
|
|
|
ret = readl_poll_timeout(&ippc->ip_pw_sts1, value,
|
|
(check_val == (value & check_val)), 100, 20000);
|
|
if (ret) {
|
|
dev_err(mtk->dev, "clocks are not stable (0x%x)\n", value);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int xhci_mtk_host_disable(struct xhci_hcd_mtk *mtk)
|
|
{
|
|
struct mu3c_ippc_regs __iomem *ippc = mtk->ippc_regs;
|
|
u32 value;
|
|
int ret;
|
|
int i;
|
|
|
|
if (!mtk->has_ippc)
|
|
return 0;
|
|
|
|
/* power down u3 ports except skipped ones */
|
|
for (i = 0; i < mtk->num_u3_ports; i++) {
|
|
if ((0x1 << i) & mtk->u3p_dis_msk)
|
|
continue;
|
|
|
|
value = readl(&ippc->u3_ctrl_p[i]);
|
|
value |= CTRL_U3_PORT_PDN;
|
|
writel(value, &ippc->u3_ctrl_p[i]);
|
|
}
|
|
|
|
/* power down all u2 ports */
|
|
for (i = 0; i < mtk->num_u2_ports; i++) {
|
|
value = readl(&ippc->u2_ctrl_p[i]);
|
|
value |= CTRL_U2_PORT_PDN;
|
|
writel(value, &ippc->u2_ctrl_p[i]);
|
|
}
|
|
|
|
/* power down host ip */
|
|
value = readl(&ippc->ip_pw_ctr1);
|
|
value |= CTRL1_IP_HOST_PDN;
|
|
writel(value, &ippc->ip_pw_ctr1);
|
|
|
|
/* wait for host ip to sleep */
|
|
ret = readl_poll_timeout(&ippc->ip_pw_sts1, value,
|
|
(value & STS1_IP_SLEEP_STS), 100, 100000);
|
|
if (ret) {
|
|
dev_err(mtk->dev, "ip sleep failed!!!\n");
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int xhci_mtk_ssusb_config(struct xhci_hcd_mtk *mtk)
|
|
{
|
|
struct mu3c_ippc_regs __iomem *ippc = mtk->ippc_regs;
|
|
u32 value;
|
|
|
|
if (!mtk->has_ippc)
|
|
return 0;
|
|
|
|
/* reset whole ip */
|
|
value = readl(&ippc->ip_pw_ctr0);
|
|
value |= CTRL0_IP_SW_RST;
|
|
writel(value, &ippc->ip_pw_ctr0);
|
|
udelay(1);
|
|
value = readl(&ippc->ip_pw_ctr0);
|
|
value &= ~CTRL0_IP_SW_RST;
|
|
writel(value, &ippc->ip_pw_ctr0);
|
|
|
|
/*
|
|
* device ip is default power-on in fact
|
|
* power down device ip, otherwise ip-sleep will fail
|
|
*/
|
|
value = readl(&ippc->ip_pw_ctr2);
|
|
value |= CTRL2_IP_DEV_PDN;
|
|
writel(value, &ippc->ip_pw_ctr2);
|
|
|
|
value = readl(&ippc->ip_xhci_cap);
|
|
mtk->num_u3_ports = CAP_U3_PORT_NUM(value);
|
|
mtk->num_u2_ports = CAP_U2_PORT_NUM(value);
|
|
dev_dbg(mtk->dev, "%s u2p:%d, u3p:%d\n", __func__,
|
|
mtk->num_u2_ports, mtk->num_u3_ports);
|
|
|
|
return xhci_mtk_host_enable(mtk);
|
|
}
|
|
|
|
/* ignore the error if the clock does not exist */
|
|
static struct clk *optional_clk_get(struct device *dev, const char *id)
|
|
{
|
|
struct clk *opt_clk;
|
|
|
|
opt_clk = devm_clk_get(dev, id);
|
|
/* ignore error number except EPROBE_DEFER */
|
|
if (IS_ERR(opt_clk) && (PTR_ERR(opt_clk) != -EPROBE_DEFER))
|
|
opt_clk = NULL;
|
|
|
|
return opt_clk;
|
|
}
|
|
|
|
static int xhci_mtk_clks_get(struct xhci_hcd_mtk *mtk)
|
|
{
|
|
struct device *dev = mtk->dev;
|
|
|
|
mtk->sys_clk = devm_clk_get(dev, "sys_ck");
|
|
if (IS_ERR(mtk->sys_clk)) {
|
|
dev_err(dev, "fail to get sys_ck\n");
|
|
return PTR_ERR(mtk->sys_clk);
|
|
}
|
|
|
|
mtk->ref_clk = optional_clk_get(dev, "ref_ck");
|
|
if (IS_ERR(mtk->ref_clk))
|
|
return PTR_ERR(mtk->ref_clk);
|
|
|
|
mtk->mcu_clk = optional_clk_get(dev, "mcu_ck");
|
|
if (IS_ERR(mtk->mcu_clk))
|
|
return PTR_ERR(mtk->mcu_clk);
|
|
|
|
mtk->dma_clk = optional_clk_get(dev, "dma_ck");
|
|
return PTR_ERR_OR_ZERO(mtk->dma_clk);
|
|
}
|
|
|
|
static int xhci_mtk_clks_enable(struct xhci_hcd_mtk *mtk)
|
|
{
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(mtk->ref_clk);
|
|
if (ret) {
|
|
dev_err(mtk->dev, "failed to enable ref_clk\n");
|
|
goto ref_clk_err;
|
|
}
|
|
|
|
ret = clk_prepare_enable(mtk->sys_clk);
|
|
if (ret) {
|
|
dev_err(mtk->dev, "failed to enable sys_clk\n");
|
|
goto sys_clk_err;
|
|
}
|
|
|
|
ret = clk_prepare_enable(mtk->mcu_clk);
|
|
if (ret) {
|
|
dev_err(mtk->dev, "failed to enable mcu_clk\n");
|
|
goto mcu_clk_err;
|
|
}
|
|
|
|
ret = clk_prepare_enable(mtk->dma_clk);
|
|
if (ret) {
|
|
dev_err(mtk->dev, "failed to enable dma_clk\n");
|
|
goto dma_clk_err;
|
|
}
|
|
|
|
return 0;
|
|
|
|
dma_clk_err:
|
|
clk_disable_unprepare(mtk->mcu_clk);
|
|
mcu_clk_err:
|
|
clk_disable_unprepare(mtk->sys_clk);
|
|
sys_clk_err:
|
|
clk_disable_unprepare(mtk->ref_clk);
|
|
ref_clk_err:
|
|
return ret;
|
|
}
|
|
|
|
static void xhci_mtk_clks_disable(struct xhci_hcd_mtk *mtk)
|
|
{
|
|
clk_disable_unprepare(mtk->dma_clk);
|
|
clk_disable_unprepare(mtk->mcu_clk);
|
|
clk_disable_unprepare(mtk->sys_clk);
|
|
clk_disable_unprepare(mtk->ref_clk);
|
|
}
|
|
|
|
/* only clocks can be turn off for ip-sleep wakeup mode */
|
|
static void usb_wakeup_ip_sleep_en(struct xhci_hcd_mtk *mtk)
|
|
{
|
|
u32 tmp;
|
|
struct regmap *pericfg = mtk->pericfg;
|
|
|
|
regmap_read(pericfg, PERI_WK_CTRL1, &tmp);
|
|
tmp &= ~UWK_CTL1_IS_P;
|
|
tmp &= ~(UWK_CTL1_IS_C(0xf));
|
|
tmp |= UWK_CTL1_IS_C(0x8);
|
|
regmap_write(pericfg, PERI_WK_CTRL1, tmp);
|
|
regmap_write(pericfg, PERI_WK_CTRL1, tmp | UWK_CTL1_IS_E);
|
|
|
|
regmap_read(pericfg, PERI_WK_CTRL1, &tmp);
|
|
dev_dbg(mtk->dev, "%s(): WK_CTRL1[P6,E25,C26:29]=%#x\n",
|
|
__func__, tmp);
|
|
}
|
|
|
|
static void usb_wakeup_ip_sleep_dis(struct xhci_hcd_mtk *mtk)
|
|
{
|
|
u32 tmp;
|
|
|
|
regmap_read(mtk->pericfg, PERI_WK_CTRL1, &tmp);
|
|
tmp &= ~UWK_CTL1_IS_E;
|
|
regmap_write(mtk->pericfg, PERI_WK_CTRL1, tmp);
|
|
}
|
|
|
|
/*
|
|
* for line-state wakeup mode, phy's power should not power-down
|
|
* and only support cable plug in/out
|
|
*/
|
|
static void usb_wakeup_line_state_en(struct xhci_hcd_mtk *mtk)
|
|
{
|
|
u32 tmp;
|
|
struct regmap *pericfg = mtk->pericfg;
|
|
|
|
/* line-state of u2-port0 */
|
|
regmap_read(pericfg, PERI_WK_CTRL1, &tmp);
|
|
tmp &= ~UWK_CTL1_0P_LS_P;
|
|
tmp &= ~(UWK_CTL1_0P_LS_C(0xf));
|
|
tmp |= UWK_CTL1_0P_LS_C(0x8);
|
|
regmap_write(pericfg, PERI_WK_CTRL1, tmp);
|
|
regmap_read(pericfg, PERI_WK_CTRL1, &tmp);
|
|
regmap_write(pericfg, PERI_WK_CTRL1, tmp | UWK_CTL1_0P_LS_E);
|
|
|
|
/* line-state of u2-port1 */
|
|
regmap_read(pericfg, PERI_WK_CTRL0, &tmp);
|
|
tmp &= ~(UWK_CTL1_1P_LS_C(0xf));
|
|
tmp |= UWK_CTL1_1P_LS_C(0x8);
|
|
regmap_write(pericfg, PERI_WK_CTRL0, tmp);
|
|
regmap_write(pericfg, PERI_WK_CTRL0, tmp | UWK_CTL1_1P_LS_E);
|
|
}
|
|
|
|
static void usb_wakeup_line_state_dis(struct xhci_hcd_mtk *mtk)
|
|
{
|
|
u32 tmp;
|
|
struct regmap *pericfg = mtk->pericfg;
|
|
|
|
/* line-state of u2-port0 */
|
|
regmap_read(pericfg, PERI_WK_CTRL1, &tmp);
|
|
tmp &= ~UWK_CTL1_0P_LS_E;
|
|
regmap_write(pericfg, PERI_WK_CTRL1, tmp);
|
|
|
|
/* line-state of u2-port1 */
|
|
regmap_read(pericfg, PERI_WK_CTRL0, &tmp);
|
|
tmp &= ~UWK_CTL1_1P_LS_E;
|
|
regmap_write(pericfg, PERI_WK_CTRL0, tmp);
|
|
}
|
|
|
|
static void usb_wakeup_enable(struct xhci_hcd_mtk *mtk)
|
|
{
|
|
if (mtk->wakeup_src == SSUSB_WK_IP_SLEEP)
|
|
usb_wakeup_ip_sleep_en(mtk);
|
|
else if (mtk->wakeup_src == SSUSB_WK_LINE_STATE)
|
|
usb_wakeup_line_state_en(mtk);
|
|
}
|
|
|
|
static void usb_wakeup_disable(struct xhci_hcd_mtk *mtk)
|
|
{
|
|
if (mtk->wakeup_src == SSUSB_WK_IP_SLEEP)
|
|
usb_wakeup_ip_sleep_dis(mtk);
|
|
else if (mtk->wakeup_src == SSUSB_WK_LINE_STATE)
|
|
usb_wakeup_line_state_dis(mtk);
|
|
}
|
|
|
|
static int usb_wakeup_of_property_parse(struct xhci_hcd_mtk *mtk,
|
|
struct device_node *dn)
|
|
{
|
|
struct device *dev = mtk->dev;
|
|
|
|
/*
|
|
* wakeup function is optional, so it is not an error if this property
|
|
* does not exist, and in such case, no need to get relative
|
|
* properties anymore.
|
|
*/
|
|
of_property_read_u32(dn, "mediatek,wakeup-src", &mtk->wakeup_src);
|
|
if (!mtk->wakeup_src)
|
|
return 0;
|
|
|
|
mtk->pericfg = syscon_regmap_lookup_by_phandle(dn,
|
|
"mediatek,syscon-wakeup");
|
|
if (IS_ERR(mtk->pericfg)) {
|
|
dev_err(dev, "fail to get pericfg regs\n");
|
|
return PTR_ERR(mtk->pericfg);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int xhci_mtk_setup(struct usb_hcd *hcd);
|
|
static const struct xhci_driver_overrides xhci_mtk_overrides __initconst = {
|
|
.reset = xhci_mtk_setup,
|
|
};
|
|
|
|
static struct hc_driver __read_mostly xhci_mtk_hc_driver;
|
|
|
|
static int xhci_mtk_phy_init(struct xhci_hcd_mtk *mtk)
|
|
{
|
|
int i;
|
|
int ret;
|
|
|
|
for (i = 0; i < mtk->num_phys; i++) {
|
|
ret = phy_init(mtk->phys[i]);
|
|
if (ret)
|
|
goto exit_phy;
|
|
}
|
|
return 0;
|
|
|
|
exit_phy:
|
|
for (; i > 0; i--)
|
|
phy_exit(mtk->phys[i - 1]);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int xhci_mtk_phy_exit(struct xhci_hcd_mtk *mtk)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < mtk->num_phys; i++)
|
|
phy_exit(mtk->phys[i]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int xhci_mtk_phy_power_on(struct xhci_hcd_mtk *mtk)
|
|
{
|
|
int i;
|
|
int ret;
|
|
|
|
for (i = 0; i < mtk->num_phys; i++) {
|
|
ret = phy_power_on(mtk->phys[i]);
|
|
if (ret)
|
|
goto power_off_phy;
|
|
}
|
|
return 0;
|
|
|
|
power_off_phy:
|
|
for (; i > 0; i--)
|
|
phy_power_off(mtk->phys[i - 1]);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void xhci_mtk_phy_power_off(struct xhci_hcd_mtk *mtk)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < mtk->num_phys; i++)
|
|
phy_power_off(mtk->phys[i]);
|
|
}
|
|
|
|
static int xhci_mtk_ldos_enable(struct xhci_hcd_mtk *mtk)
|
|
{
|
|
int ret;
|
|
|
|
ret = regulator_enable(mtk->vbus);
|
|
if (ret) {
|
|
dev_err(mtk->dev, "failed to enable vbus\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = regulator_enable(mtk->vusb33);
|
|
if (ret) {
|
|
dev_err(mtk->dev, "failed to enable vusb33\n");
|
|
regulator_disable(mtk->vbus);
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void xhci_mtk_ldos_disable(struct xhci_hcd_mtk *mtk)
|
|
{
|
|
regulator_disable(mtk->vbus);
|
|
regulator_disable(mtk->vusb33);
|
|
}
|
|
|
|
static void xhci_mtk_quirks(struct device *dev, struct xhci_hcd *xhci)
|
|
{
|
|
struct usb_hcd *hcd = xhci_to_hcd(xhci);
|
|
struct xhci_hcd_mtk *mtk = hcd_to_mtk(hcd);
|
|
|
|
/*
|
|
* As of now platform drivers don't provide MSI support so we ensure
|
|
* here that the generic code does not try to make a pci_dev from our
|
|
* dev struct in order to setup MSI
|
|
*/
|
|
xhci->quirks |= XHCI_PLAT;
|
|
xhci->quirks |= XHCI_MTK_HOST;
|
|
/*
|
|
* MTK host controller gives a spurious successful event after a
|
|
* short transfer. Ignore it.
|
|
*/
|
|
xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
|
|
if (mtk->lpm_support)
|
|
xhci->quirks |= XHCI_LPM_SUPPORT;
|
|
}
|
|
|
|
/* called during probe() after chip reset completes */
|
|
static int xhci_mtk_setup(struct usb_hcd *hcd)
|
|
{
|
|
struct xhci_hcd_mtk *mtk = hcd_to_mtk(hcd);
|
|
int ret;
|
|
|
|
if (usb_hcd_is_primary_hcd(hcd)) {
|
|
ret = xhci_mtk_ssusb_config(mtk);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
ret = xhci_gen_setup(hcd, xhci_mtk_quirks);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (usb_hcd_is_primary_hcd(hcd)) {
|
|
ret = xhci_mtk_sch_init(mtk);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int xhci_mtk_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *node = dev->of_node;
|
|
struct xhci_hcd_mtk *mtk;
|
|
const struct hc_driver *driver;
|
|
struct xhci_hcd *xhci;
|
|
struct resource *res;
|
|
struct usb_hcd *hcd;
|
|
struct phy *phy;
|
|
int phy_num;
|
|
int ret = -ENODEV;
|
|
int irq;
|
|
|
|
if (usb_disabled())
|
|
return -ENODEV;
|
|
|
|
driver = &xhci_mtk_hc_driver;
|
|
mtk = devm_kzalloc(dev, sizeof(*mtk), GFP_KERNEL);
|
|
if (!mtk)
|
|
return -ENOMEM;
|
|
|
|
mtk->dev = dev;
|
|
mtk->vbus = devm_regulator_get(dev, "vbus");
|
|
if (IS_ERR(mtk->vbus)) {
|
|
dev_err(dev, "fail to get vbus\n");
|
|
return PTR_ERR(mtk->vbus);
|
|
}
|
|
|
|
mtk->vusb33 = devm_regulator_get(dev, "vusb33");
|
|
if (IS_ERR(mtk->vusb33)) {
|
|
dev_err(dev, "fail to get vusb33\n");
|
|
return PTR_ERR(mtk->vusb33);
|
|
}
|
|
|
|
ret = xhci_mtk_clks_get(mtk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mtk->lpm_support = of_property_read_bool(node, "usb3-lpm-capable");
|
|
/* optional property, ignore the error if it does not exist */
|
|
of_property_read_u32(node, "mediatek,u3p-dis-msk",
|
|
&mtk->u3p_dis_msk);
|
|
|
|
ret = usb_wakeup_of_property_parse(mtk, node);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mtk->num_phys = of_count_phandle_with_args(node,
|
|
"phys", "#phy-cells");
|
|
if (mtk->num_phys > 0) {
|
|
mtk->phys = devm_kcalloc(dev, mtk->num_phys,
|
|
sizeof(*mtk->phys), GFP_KERNEL);
|
|
if (!mtk->phys)
|
|
return -ENOMEM;
|
|
} else {
|
|
mtk->num_phys = 0;
|
|
}
|
|
pm_runtime_enable(dev);
|
|
pm_runtime_get_sync(dev);
|
|
device_enable_async_suspend(dev);
|
|
|
|
ret = xhci_mtk_ldos_enable(mtk);
|
|
if (ret)
|
|
goto disable_pm;
|
|
|
|
ret = xhci_mtk_clks_enable(mtk);
|
|
if (ret)
|
|
goto disable_ldos;
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0) {
|
|
ret = irq;
|
|
goto disable_clk;
|
|
}
|
|
|
|
/* Initialize dma_mask and coherent_dma_mask to 32-bits */
|
|
ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
|
|
if (ret)
|
|
goto disable_clk;
|
|
|
|
hcd = usb_create_hcd(driver, dev, dev_name(dev));
|
|
if (!hcd) {
|
|
ret = -ENOMEM;
|
|
goto disable_clk;
|
|
}
|
|
|
|
/*
|
|
* USB 2.0 roothub is stored in the platform_device.
|
|
* Swap it with mtk HCD.
|
|
*/
|
|
mtk->hcd = platform_get_drvdata(pdev);
|
|
platform_set_drvdata(pdev, mtk);
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mac");
|
|
hcd->regs = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(hcd->regs)) {
|
|
ret = PTR_ERR(hcd->regs);
|
|
goto put_usb2_hcd;
|
|
}
|
|
hcd->rsrc_start = res->start;
|
|
hcd->rsrc_len = resource_size(res);
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ippc");
|
|
if (res) { /* ippc register is optional */
|
|
mtk->ippc_regs = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(mtk->ippc_regs)) {
|
|
ret = PTR_ERR(mtk->ippc_regs);
|
|
goto put_usb2_hcd;
|
|
}
|
|
mtk->has_ippc = true;
|
|
} else {
|
|
mtk->has_ippc = false;
|
|
}
|
|
|
|
for (phy_num = 0; phy_num < mtk->num_phys; phy_num++) {
|
|
phy = devm_of_phy_get_by_index(dev, node, phy_num);
|
|
if (IS_ERR(phy)) {
|
|
ret = PTR_ERR(phy);
|
|
goto put_usb2_hcd;
|
|
}
|
|
mtk->phys[phy_num] = phy;
|
|
}
|
|
|
|
ret = xhci_mtk_phy_init(mtk);
|
|
if (ret)
|
|
goto put_usb2_hcd;
|
|
|
|
ret = xhci_mtk_phy_power_on(mtk);
|
|
if (ret)
|
|
goto exit_phys;
|
|
|
|
device_init_wakeup(dev, true);
|
|
|
|
xhci = hcd_to_xhci(hcd);
|
|
xhci->main_hcd = hcd;
|
|
|
|
/*
|
|
* imod_interval is the interrupt moderation value in nanoseconds.
|
|
* The increment interval is 8 times as much as that defined in
|
|
* the xHCI spec on MTK's controller.
|
|
*/
|
|
xhci->imod_interval = 5000;
|
|
device_property_read_u32(dev, "imod-interval-ns", &xhci->imod_interval);
|
|
|
|
xhci->shared_hcd = usb_create_shared_hcd(driver, dev,
|
|
dev_name(dev), hcd);
|
|
if (!xhci->shared_hcd) {
|
|
ret = -ENOMEM;
|
|
goto power_off_phys;
|
|
}
|
|
|
|
ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
|
|
if (ret)
|
|
goto put_usb3_hcd;
|
|
|
|
if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
|
|
xhci->shared_hcd->can_do_streams = 1;
|
|
|
|
ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
|
|
if (ret)
|
|
goto dealloc_usb2_hcd;
|
|
|
|
return 0;
|
|
|
|
dealloc_usb2_hcd:
|
|
usb_remove_hcd(hcd);
|
|
|
|
put_usb3_hcd:
|
|
xhci_mtk_sch_exit(mtk);
|
|
usb_put_hcd(xhci->shared_hcd);
|
|
|
|
power_off_phys:
|
|
xhci_mtk_phy_power_off(mtk);
|
|
device_init_wakeup(dev, false);
|
|
|
|
exit_phys:
|
|
xhci_mtk_phy_exit(mtk);
|
|
|
|
put_usb2_hcd:
|
|
usb_put_hcd(hcd);
|
|
|
|
disable_clk:
|
|
xhci_mtk_clks_disable(mtk);
|
|
|
|
disable_ldos:
|
|
xhci_mtk_ldos_disable(mtk);
|
|
|
|
disable_pm:
|
|
pm_runtime_put_sync(dev);
|
|
pm_runtime_disable(dev);
|
|
return ret;
|
|
}
|
|
|
|
static int xhci_mtk_remove(struct platform_device *dev)
|
|
{
|
|
struct xhci_hcd_mtk *mtk = platform_get_drvdata(dev);
|
|
struct usb_hcd *hcd = mtk->hcd;
|
|
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
|
|
|
|
usb_remove_hcd(xhci->shared_hcd);
|
|
xhci_mtk_phy_power_off(mtk);
|
|
xhci_mtk_phy_exit(mtk);
|
|
device_init_wakeup(&dev->dev, false);
|
|
|
|
usb_remove_hcd(hcd);
|
|
usb_put_hcd(xhci->shared_hcd);
|
|
usb_put_hcd(hcd);
|
|
xhci_mtk_sch_exit(mtk);
|
|
xhci_mtk_clks_disable(mtk);
|
|
xhci_mtk_ldos_disable(mtk);
|
|
pm_runtime_put_sync(&dev->dev);
|
|
pm_runtime_disable(&dev->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* if ip sleep fails, and all clocks are disabled, access register will hang
|
|
* AHB bus, so stop polling roothubs to avoid regs access on bus suspend.
|
|
* and no need to check whether ip sleep failed or not; this will cause SPM
|
|
* to wake up system immediately after system suspend complete if ip sleep
|
|
* fails, it is what we wanted.
|
|
*/
|
|
static int __maybe_unused xhci_mtk_suspend(struct device *dev)
|
|
{
|
|
struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev);
|
|
struct usb_hcd *hcd = mtk->hcd;
|
|
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
|
|
|
|
xhci_dbg(xhci, "%s: stop port polling\n", __func__);
|
|
clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
|
|
del_timer_sync(&hcd->rh_timer);
|
|
clear_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags);
|
|
del_timer_sync(&xhci->shared_hcd->rh_timer);
|
|
|
|
xhci_mtk_host_disable(mtk);
|
|
xhci_mtk_phy_power_off(mtk);
|
|
xhci_mtk_clks_disable(mtk);
|
|
usb_wakeup_enable(mtk);
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused xhci_mtk_resume(struct device *dev)
|
|
{
|
|
struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev);
|
|
struct usb_hcd *hcd = mtk->hcd;
|
|
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
|
|
|
|
usb_wakeup_disable(mtk);
|
|
xhci_mtk_clks_enable(mtk);
|
|
xhci_mtk_phy_power_on(mtk);
|
|
xhci_mtk_host_enable(mtk);
|
|
|
|
xhci_dbg(xhci, "%s: restart port polling\n", __func__);
|
|
set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
|
|
usb_hcd_poll_rh_status(hcd);
|
|
set_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags);
|
|
usb_hcd_poll_rh_status(xhci->shared_hcd);
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops xhci_mtk_pm_ops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(xhci_mtk_suspend, xhci_mtk_resume)
|
|
};
|
|
#define DEV_PM_OPS IS_ENABLED(CONFIG_PM) ? &xhci_mtk_pm_ops : NULL
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id mtk_xhci_of_match[] = {
|
|
{ .compatible = "mediatek,mt8173-xhci"},
|
|
{ .compatible = "mediatek,mtk-xhci"},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mtk_xhci_of_match);
|
|
#endif
|
|
|
|
static struct platform_driver mtk_xhci_driver = {
|
|
.probe = xhci_mtk_probe,
|
|
.remove = xhci_mtk_remove,
|
|
.driver = {
|
|
.name = "xhci-mtk",
|
|
.pm = DEV_PM_OPS,
|
|
.of_match_table = of_match_ptr(mtk_xhci_of_match),
|
|
},
|
|
};
|
|
MODULE_ALIAS("platform:xhci-mtk");
|
|
|
|
static int __init xhci_mtk_init(void)
|
|
{
|
|
xhci_init_driver(&xhci_mtk_hc_driver, &xhci_mtk_overrides);
|
|
return platform_driver_register(&mtk_xhci_driver);
|
|
}
|
|
module_init(xhci_mtk_init);
|
|
|
|
static void __exit xhci_mtk_exit(void)
|
|
{
|
|
platform_driver_unregister(&mtk_xhci_driver);
|
|
}
|
|
module_exit(xhci_mtk_exit);
|
|
|
|
MODULE_AUTHOR("Chunfeng Yun <chunfeng.yun@mediatek.com>");
|
|
MODULE_DESCRIPTION("MediaTek xHCI Host Controller Driver");
|
|
MODULE_LICENSE("GPL v2");
|