forked from Minki/linux
aafe93516b
Every time the hub signals a reset while we (device) are hsotg->connected,
dwc2_hsotg_core_init_disconnected() is called, which in turn calls
dwc2_hs_phy_init().
GUSBCFG.USBTrdTim is cleared upon Core Soft Reset, so if
hsotg->params.phy_utmi_width is 8-bit, the value of GUSBCFG.USBTrdTim (the
default one: 0x5, corresponding to 16-bit) is always different from
hsotg->params.phy_utmi_width, thus dwc2_core_reset() is called every
time (usbcfg != usbcfg_old), which causes 2 issues:
1) The call to dwc2_core_reset() does another reset 300us after the initial
Chirp K of the first reset (which should last at least Tuch = 1ms), and
messes up the High-speed Detection Handshake: both hub and device drive
current into the D+ and D- lines at the same time.
2) GUSBCFG.USBTrdTim is cleared by the second reset, so its value is always
the default one (0x5).
Setting GUSBCFG.USBTrdTim after the potential call to dwc2_core_reset()
fixes both issues. It is now set even when select_phy is false because the
cost of the Core Soft Reset is removed.
Fixes:
|
||
|---|---|---|
| .. | ||
| core_intr.c | ||
| core.c | ||
| core.h | ||
| debug.h | ||
| debugfs.c | ||
| drd.c | ||
| gadget.c | ||
| hcd_ddma.c | ||
| hcd_intr.c | ||
| hcd_queue.c | ||
| hcd.c | ||
| hcd.h | ||
| hw.h | ||
| Kconfig | ||
| Makefile | ||
| params.c | ||
| pci.c | ||
| platform.c | ||