The WWAN framework provides a unified way to handle WWAN/modems and its
control port(s). It has initially been introduced to support MHI/PCI
modems, offering the same control protocols as the USB variants such as
MBIM, QMI, AT... The WWAN framework exposes these control protocols as
character devices, similarly to cdc-wdm, but in a bus agnostic fashion.
This change adds registration of the USB modem cdc-wdm control endpoints
to the WWAN framework as standard control ports (wwanXpY...).
Exposing cdc-wdm through WWAN framework normally maintains backward
compatibility, e.g:
    $ qmicli --device-open-qmi -d /dev/wwan0p1QMI --dms-get-ids
instead of
    $ qmicli --device-open-qmi -d /dev/cdc-wdm0 --dms-get-ids
However, some tools may rely on cdc-wdm driver/device name for device
detection. It is then safer to keep the 'legacy' cdc-wdm character
device to prevent any breakage. This is handled in this change by
API mutual exclusion, only one access method can be used at a time,
either cdc-wdm chardev or WWAN API.
Note that unknown channel types (other than MBIM, AT or MBIM) are not
registered to the WWAN framework.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
		
	
			
		
			
				
	
	
		
			228 lines
		
	
	
		
			6.2 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			228 lines
		
	
	
		
			6.2 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0-only
 | |
| /* huawei_cdc_ncm.c - handles Huawei devices using the CDC NCM protocol as
 | |
|  * transport layer.
 | |
|  * Copyright (C) 2013	 Enrico Mioso <mrkiko.rs@gmail.com>
 | |
|  *
 | |
|  * ABSTRACT:
 | |
|  * This driver handles devices resembling the CDC NCM standard, but
 | |
|  * encapsulating another protocol inside it. An example are some Huawei 3G
 | |
|  * devices, exposing an embedded AT channel where you can set up the NCM
 | |
|  * connection.
 | |
|  * This code has been heavily inspired by the cdc_mbim.c driver, which is
 | |
|  * Copyright (c) 2012  Smith Micro Software, Inc.
 | |
|  * Copyright (c) 2012  Bjørn Mork <bjorn@mork.no>
 | |
|  */
 | |
| 
 | |
| #include <linux/module.h>
 | |
| #include <linux/netdevice.h>
 | |
| #include <linux/ethtool.h>
 | |
| #include <linux/if_vlan.h>
 | |
| #include <linux/ip.h>
 | |
| #include <linux/mii.h>
 | |
| #include <linux/usb.h>
 | |
| #include <linux/usb/cdc.h>
 | |
| #include <linux/usb/usbnet.h>
 | |
| #include <linux/usb/cdc-wdm.h>
 | |
| #include <linux/usb/cdc_ncm.h>
 | |
| 
 | |
| /* Driver data */
 | |
| struct huawei_cdc_ncm_state {
 | |
| 	struct cdc_ncm_ctx *ctx;
 | |
| 	atomic_t pmcount;
 | |
| 	struct usb_driver *subdriver;
 | |
| 	struct usb_interface *control;
 | |
| 	struct usb_interface *data;
 | |
| };
 | |
| 
 | |
| static int huawei_cdc_ncm_manage_power(struct usbnet *usbnet_dev, int on)
 | |
| {
 | |
| 	struct huawei_cdc_ncm_state *drvstate = (void *)&usbnet_dev->data;
 | |
| 	int rv;
 | |
| 
 | |
| 	if ((on && atomic_add_return(1, &drvstate->pmcount) == 1) ||
 | |
| 			(!on && atomic_dec_and_test(&drvstate->pmcount))) {
 | |
| 		rv = usb_autopm_get_interface(usbnet_dev->intf);
 | |
| 		usbnet_dev->intf->needs_remote_wakeup = on;
 | |
| 		if (!rv)
 | |
| 			usb_autopm_put_interface(usbnet_dev->intf);
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int huawei_cdc_ncm_wdm_manage_power(struct usb_interface *intf,
 | |
| 					   int status)
 | |
| {
 | |
| 	struct usbnet *usbnet_dev = usb_get_intfdata(intf);
 | |
| 
 | |
| 	/* can be called while disconnecting */
 | |
| 	if (!usbnet_dev)
 | |
| 		return 0;
 | |
| 
 | |
| 	return huawei_cdc_ncm_manage_power(usbnet_dev, status);
 | |
| }
 | |
| 
 | |
| 
 | |
| static int huawei_cdc_ncm_bind(struct usbnet *usbnet_dev,
 | |
| 			       struct usb_interface *intf)
 | |
| {
 | |
| 	struct cdc_ncm_ctx *ctx;
 | |
| 	struct usb_driver *subdriver = ERR_PTR(-ENODEV);
 | |
| 	int ret;
 | |
| 	struct huawei_cdc_ncm_state *drvstate = (void *)&usbnet_dev->data;
 | |
| 	int drvflags = 0;
 | |
| 
 | |
| 	/* altsetting should always be 1 for NCM devices - so we hard-coded
 | |
| 	 * it here. Some huawei devices will need the NDP part of the NCM package to
 | |
| 	 * be at the end of the frame.
 | |
| 	 */
 | |
| 	drvflags |= CDC_NCM_FLAG_NDP_TO_END;
 | |
| 
 | |
| 	/* For many Huawei devices the NTB32 mode is the default and the best mode
 | |
| 	 * they work with. Huawei E5785 and E5885 devices refuse to work in NTB16 mode at all.
 | |
| 	 */
 | |
| 	drvflags |= CDC_NCM_FLAG_PREFER_NTB32;
 | |
| 
 | |
| 	ret = cdc_ncm_bind_common(usbnet_dev, intf, 1, drvflags);
 | |
| 	if (ret)
 | |
| 		goto err;
 | |
| 
 | |
| 	ctx = drvstate->ctx;
 | |
| 
 | |
| 	if (usbnet_dev->status)
 | |
| 		/* The wMaxCommand buffer must be big enough to hold
 | |
| 		 * any message from the modem. Experience has shown
 | |
| 		 * that some replies are more than 256 bytes long
 | |
| 		 */
 | |
| 		subdriver = usb_cdc_wdm_register(ctx->control,
 | |
| 						 &usbnet_dev->status->desc,
 | |
| 						 1024, /* wMaxCommand */
 | |
| 						 WWAN_PORT_AT,
 | |
| 						 huawei_cdc_ncm_wdm_manage_power);
 | |
| 	if (IS_ERR(subdriver)) {
 | |
| 		ret = PTR_ERR(subdriver);
 | |
| 		cdc_ncm_unbind(usbnet_dev, intf);
 | |
| 		goto err;
 | |
| 	}
 | |
| 
 | |
| 	/* Prevent usbnet from using the status descriptor */
 | |
| 	usbnet_dev->status = NULL;
 | |
| 
 | |
| 	drvstate->subdriver = subdriver;
 | |
| 
 | |
| err:
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static void huawei_cdc_ncm_unbind(struct usbnet *usbnet_dev,
 | |
| 				  struct usb_interface *intf)
 | |
| {
 | |
| 	struct huawei_cdc_ncm_state *drvstate = (void *)&usbnet_dev->data;
 | |
| 	struct cdc_ncm_ctx *ctx = drvstate->ctx;
 | |
| 
 | |
| 	if (drvstate->subdriver && drvstate->subdriver->disconnect)
 | |
| 		drvstate->subdriver->disconnect(ctx->control);
 | |
| 	drvstate->subdriver = NULL;
 | |
| 
 | |
| 	cdc_ncm_unbind(usbnet_dev, intf);
 | |
| }
 | |
| 
 | |
| static int huawei_cdc_ncm_suspend(struct usb_interface *intf,
 | |
| 				  pm_message_t message)
 | |
| {
 | |
| 	int ret = 0;
 | |
| 	struct usbnet *usbnet_dev = usb_get_intfdata(intf);
 | |
| 	struct huawei_cdc_ncm_state *drvstate = (void *)&usbnet_dev->data;
 | |
| 	struct cdc_ncm_ctx *ctx = drvstate->ctx;
 | |
| 
 | |
| 	if (ctx == NULL) {
 | |
| 		ret = -ENODEV;
 | |
| 		goto error;
 | |
| 	}
 | |
| 
 | |
| 	ret = usbnet_suspend(intf, message);
 | |
| 	if (ret < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	if (intf == ctx->control &&
 | |
| 		drvstate->subdriver &&
 | |
| 		drvstate->subdriver->suspend)
 | |
| 		ret = drvstate->subdriver->suspend(intf, message);
 | |
| 	if (ret < 0)
 | |
| 		usbnet_resume(intf);
 | |
| 
 | |
| error:
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int huawei_cdc_ncm_resume(struct usb_interface *intf)
 | |
| {
 | |
| 	int ret = 0;
 | |
| 	struct usbnet *usbnet_dev = usb_get_intfdata(intf);
 | |
| 	struct huawei_cdc_ncm_state *drvstate = (void *)&usbnet_dev->data;
 | |
| 	bool callsub;
 | |
| 	struct cdc_ncm_ctx *ctx = drvstate->ctx;
 | |
| 
 | |
| 	/* should we call subdriver's resume function? */
 | |
| 	callsub =
 | |
| 		(intf == ctx->control &&
 | |
| 		drvstate->subdriver &&
 | |
| 		drvstate->subdriver->resume);
 | |
| 
 | |
| 	if (callsub)
 | |
| 		ret = drvstate->subdriver->resume(intf);
 | |
| 	if (ret < 0)
 | |
| 		goto err;
 | |
| 	ret = usbnet_resume(intf);
 | |
| 	if (ret < 0 && callsub)
 | |
| 		drvstate->subdriver->suspend(intf, PMSG_SUSPEND);
 | |
| err:
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static const struct driver_info huawei_cdc_ncm_info = {
 | |
| 	.description = "Huawei CDC NCM device",
 | |
| 	.flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET | FLAG_WWAN,
 | |
| 	.bind = huawei_cdc_ncm_bind,
 | |
| 	.unbind = huawei_cdc_ncm_unbind,
 | |
| 	.manage_power = huawei_cdc_ncm_manage_power,
 | |
| 	.rx_fixup = cdc_ncm_rx_fixup,
 | |
| 	.tx_fixup = cdc_ncm_tx_fixup,
 | |
| };
 | |
| 
 | |
| static const struct usb_device_id huawei_cdc_ncm_devs[] = {
 | |
| 	/* Huawei NCM devices disguised as vendor specific */
 | |
| 	{ USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x02, 0x16),
 | |
| 	  .driver_info = (unsigned long)&huawei_cdc_ncm_info,
 | |
| 	},
 | |
| 	{ USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x02, 0x46),
 | |
| 	  .driver_info = (unsigned long)&huawei_cdc_ncm_info,
 | |
| 	},
 | |
| 	{ USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x02, 0x76),
 | |
| 	  .driver_info = (unsigned long)&huawei_cdc_ncm_info,
 | |
| 	},
 | |
| 	{ USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x03, 0x16),
 | |
| 	  .driver_info = (unsigned long)&huawei_cdc_ncm_info,
 | |
| 	},
 | |
| 
 | |
| 	/* Terminating entry */
 | |
| 	{
 | |
| 	},
 | |
| };
 | |
| MODULE_DEVICE_TABLE(usb, huawei_cdc_ncm_devs);
 | |
| 
 | |
| static struct usb_driver huawei_cdc_ncm_driver = {
 | |
| 	.name = "huawei_cdc_ncm",
 | |
| 	.id_table = huawei_cdc_ncm_devs,
 | |
| 	.probe = usbnet_probe,
 | |
| 	.disconnect = usbnet_disconnect,
 | |
| 	.suspend = huawei_cdc_ncm_suspend,
 | |
| 	.resume = huawei_cdc_ncm_resume,
 | |
| 	.reset_resume = huawei_cdc_ncm_resume,
 | |
| 	.supports_autosuspend = 1,
 | |
| 	.disable_hub_initiated_lpm = 1,
 | |
| };
 | |
| module_usb_driver(huawei_cdc_ncm_driver);
 | |
| MODULE_AUTHOR("Enrico Mioso <mrkiko.rs@gmail.com>");
 | |
| MODULE_DESCRIPTION("USB CDC NCM host driver with encapsulated protocol support");
 | |
| MODULE_LICENSE("GPL");
 |