linux/drivers/i2c/busses/i2c-ismt.c
Radu Rendec aad550f93f i2c: ismt: dump registers at the end of transactions
This patch dumps general and master registers at the end of transactions
when debugging is enabled. Previously, registers were only dumped before
submitting new descriptors (at the beginning of transactions).

This helps debugging if some registers change as result of a failed
transaction (e.g. bits are set in the ERRSTS general register).

Signed-off-by: Radu Rendec <radu.rendec@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-15 18:03:56 +01:00

959 lines
27 KiB
C

/*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* Copyright(c) 2012 Intel Corporation. All rights reserved.
*
* GPL LICENSE SUMMARY
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* BSD LICENSE
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Supports the SMBus Message Transport (SMT) in the Intel Atom Processor
* S12xx Product Family.
*
* Features supported by this driver:
* Hardware PEC yes
* Block buffer yes
* Block process call transaction no
* Slave mode no
*/
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/stddef.h>
#include <linux/completion.h>
#include <linux/dma-mapping.h>
#include <linux/i2c.h>
#include <linux/acpi.h>
#include <linux/interrupt.h>
#include <linux/io-64-nonatomic-lo-hi.h>
/* PCI Address Constants */
#define SMBBAR 0
/* PCI DIDs for the Intel SMBus Message Transport (SMT) Devices */
#define PCI_DEVICE_ID_INTEL_S1200_SMT0 0x0c59
#define PCI_DEVICE_ID_INTEL_S1200_SMT1 0x0c5a
#define PCI_DEVICE_ID_INTEL_DNV_SMT 0x19ac
#define PCI_DEVICE_ID_INTEL_AVOTON_SMT 0x1f15
#define ISMT_DESC_ENTRIES 2 /* number of descriptor entries */
#define ISMT_MAX_RETRIES 3 /* number of SMBus retries to attempt */
/* Hardware Descriptor Constants - Control Field */
#define ISMT_DESC_CWRL 0x01 /* Command/Write Length */
#define ISMT_DESC_BLK 0X04 /* Perform Block Transaction */
#define ISMT_DESC_FAIR 0x08 /* Set fairness flag upon successful arbit. */
#define ISMT_DESC_PEC 0x10 /* Packet Error Code */
#define ISMT_DESC_I2C 0x20 /* I2C Enable */
#define ISMT_DESC_INT 0x40 /* Interrupt */
#define ISMT_DESC_SOE 0x80 /* Stop On Error */
/* Hardware Descriptor Constants - Status Field */
#define ISMT_DESC_SCS 0x01 /* Success */
#define ISMT_DESC_DLTO 0x04 /* Data Low Time Out */
#define ISMT_DESC_NAK 0x08 /* NAK Received */
#define ISMT_DESC_CRC 0x10 /* CRC Error */
#define ISMT_DESC_CLTO 0x20 /* Clock Low Time Out */
#define ISMT_DESC_COL 0x40 /* Collisions */
#define ISMT_DESC_LPR 0x80 /* Large Packet Received */
/* Macros */
#define ISMT_DESC_ADDR_RW(addr, rw) (((addr) << 1) | (rw))
/* iSMT General Register address offsets (SMBBAR + <addr>) */
#define ISMT_GR_GCTRL 0x000 /* General Control */
#define ISMT_GR_SMTICL 0x008 /* SMT Interrupt Cause Location */
#define ISMT_GR_ERRINTMSK 0x010 /* Error Interrupt Mask */
#define ISMT_GR_ERRAERMSK 0x014 /* Error AER Mask */
#define ISMT_GR_ERRSTS 0x018 /* Error Status */
#define ISMT_GR_ERRINFO 0x01c /* Error Information */
/* iSMT Master Registers */
#define ISMT_MSTR_MDBA 0x100 /* Master Descriptor Base Address */
#define ISMT_MSTR_MCTRL 0x108 /* Master Control */
#define ISMT_MSTR_MSTS 0x10c /* Master Status */
#define ISMT_MSTR_MDS 0x110 /* Master Descriptor Size */
#define ISMT_MSTR_RPOLICY 0x114 /* Retry Policy */
/* iSMT Miscellaneous Registers */
#define ISMT_SPGT 0x300 /* SMBus PHY Global Timing */
/* General Control Register (GCTRL) bit definitions */
#define ISMT_GCTRL_TRST 0x04 /* Target Reset */
#define ISMT_GCTRL_KILL 0x08 /* Kill */
#define ISMT_GCTRL_SRST 0x40 /* Soft Reset */
/* Master Control Register (MCTRL) bit definitions */
#define ISMT_MCTRL_SS 0x01 /* Start/Stop */
#define ISMT_MCTRL_MEIE 0x10 /* Master Error Interrupt Enable */
#define ISMT_MCTRL_FMHP 0x00ff0000 /* Firmware Master Head Ptr (FMHP) */
/* Master Status Register (MSTS) bit definitions */
#define ISMT_MSTS_HMTP 0xff0000 /* HW Master Tail Pointer (HMTP) */
#define ISMT_MSTS_MIS 0x20 /* Master Interrupt Status (MIS) */
#define ISMT_MSTS_MEIS 0x10 /* Master Error Int Status (MEIS) */
#define ISMT_MSTS_IP 0x01 /* In Progress */
/* Master Descriptor Size (MDS) bit definitions */
#define ISMT_MDS_MASK 0xff /* Master Descriptor Size mask (MDS) */
/* SMBus PHY Global Timing Register (SPGT) bit definitions */
#define ISMT_SPGT_SPD_MASK 0xc0000000 /* SMBus Speed mask */
#define ISMT_SPGT_SPD_80K 0x00 /* 80 kHz */
#define ISMT_SPGT_SPD_100K (0x1 << 30) /* 100 kHz */
#define ISMT_SPGT_SPD_400K (0x2 << 30) /* 400 kHz */
#define ISMT_SPGT_SPD_1M (0x3 << 30) /* 1 MHz */
/* MSI Control Register (MSICTL) bit definitions */
#define ISMT_MSICTL_MSIE 0x01 /* MSI Enable */
/* iSMT Hardware Descriptor */
struct ismt_desc {
u8 tgtaddr_rw; /* target address & r/w bit */
u8 wr_len_cmd; /* write length in bytes or a command */
u8 rd_len; /* read length */
u8 control; /* control bits */
u8 status; /* status bits */
u8 retry; /* collision retry and retry count */
u8 rxbytes; /* received bytes */
u8 txbytes; /* transmitted bytes */
u32 dptr_low; /* lower 32 bit of the data pointer */
u32 dptr_high; /* upper 32 bit of the data pointer */
} __packed;
struct ismt_priv {
struct i2c_adapter adapter;
void __iomem *smba; /* PCI BAR */
struct pci_dev *pci_dev;
struct ismt_desc *hw; /* descriptor virt base addr */
dma_addr_t io_rng_dma; /* descriptor HW base addr */
u8 head; /* ring buffer head pointer */
struct completion cmp; /* interrupt completion */
u8 dma_buffer[I2C_SMBUS_BLOCK_MAX + 1]; /* temp R/W data buffer */
};
/**
* ismt_ids - PCI device IDs supported by this driver
*/
static const struct pci_device_id ismt_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_S1200_SMT0) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_S1200_SMT1) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DNV_SMT) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_AVOTON_SMT) },
{ 0, }
};
MODULE_DEVICE_TABLE(pci, ismt_ids);
/* Bus speed control bits for slow debuggers - refer to the docs for usage */
static unsigned int bus_speed;
module_param(bus_speed, uint, S_IRUGO);
MODULE_PARM_DESC(bus_speed, "Bus Speed in kHz (0 = BIOS default)");
/**
* __ismt_desc_dump() - dump the contents of a specific descriptor
*/
static void __ismt_desc_dump(struct device *dev, const struct ismt_desc *desc)
{
dev_dbg(dev, "Descriptor struct: %p\n", desc);
dev_dbg(dev, "\ttgtaddr_rw=0x%02X\n", desc->tgtaddr_rw);
dev_dbg(dev, "\twr_len_cmd=0x%02X\n", desc->wr_len_cmd);
dev_dbg(dev, "\trd_len= 0x%02X\n", desc->rd_len);
dev_dbg(dev, "\tcontrol= 0x%02X\n", desc->control);
dev_dbg(dev, "\tstatus= 0x%02X\n", desc->status);
dev_dbg(dev, "\tretry= 0x%02X\n", desc->retry);
dev_dbg(dev, "\trxbytes= 0x%02X\n", desc->rxbytes);
dev_dbg(dev, "\ttxbytes= 0x%02X\n", desc->txbytes);
dev_dbg(dev, "\tdptr_low= 0x%08X\n", desc->dptr_low);
dev_dbg(dev, "\tdptr_high= 0x%08X\n", desc->dptr_high);
}
/**
* ismt_desc_dump() - dump the contents of a descriptor for debug purposes
* @priv: iSMT private data
*/
static void ismt_desc_dump(struct ismt_priv *priv)
{
struct device *dev = &priv->pci_dev->dev;
struct ismt_desc *desc = &priv->hw[priv->head];
dev_dbg(dev, "Dump of the descriptor struct: 0x%X\n", priv->head);
__ismt_desc_dump(dev, desc);
}
/**
* ismt_gen_reg_dump() - dump the iSMT General Registers
* @priv: iSMT private data
*/
static void ismt_gen_reg_dump(struct ismt_priv *priv)
{
struct device *dev = &priv->pci_dev->dev;
dev_dbg(dev, "Dump of the iSMT General Registers\n");
dev_dbg(dev, " GCTRL.... : (0x%p)=0x%X\n",
priv->smba + ISMT_GR_GCTRL,
readl(priv->smba + ISMT_GR_GCTRL));
dev_dbg(dev, " SMTICL... : (0x%p)=0x%016llX\n",
priv->smba + ISMT_GR_SMTICL,
(long long unsigned int)readq(priv->smba + ISMT_GR_SMTICL));
dev_dbg(dev, " ERRINTMSK : (0x%p)=0x%X\n",
priv->smba + ISMT_GR_ERRINTMSK,
readl(priv->smba + ISMT_GR_ERRINTMSK));
dev_dbg(dev, " ERRAERMSK : (0x%p)=0x%X\n",
priv->smba + ISMT_GR_ERRAERMSK,
readl(priv->smba + ISMT_GR_ERRAERMSK));
dev_dbg(dev, " ERRSTS... : (0x%p)=0x%X\n",
priv->smba + ISMT_GR_ERRSTS,
readl(priv->smba + ISMT_GR_ERRSTS));
dev_dbg(dev, " ERRINFO.. : (0x%p)=0x%X\n",
priv->smba + ISMT_GR_ERRINFO,
readl(priv->smba + ISMT_GR_ERRINFO));
}
/**
* ismt_mstr_reg_dump() - dump the iSMT Master Registers
* @priv: iSMT private data
*/
static void ismt_mstr_reg_dump(struct ismt_priv *priv)
{
struct device *dev = &priv->pci_dev->dev;
dev_dbg(dev, "Dump of the iSMT Master Registers\n");
dev_dbg(dev, " MDBA..... : (0x%p)=0x%016llX\n",
priv->smba + ISMT_MSTR_MDBA,
(long long unsigned int)readq(priv->smba + ISMT_MSTR_MDBA));
dev_dbg(dev, " MCTRL.... : (0x%p)=0x%X\n",
priv->smba + ISMT_MSTR_MCTRL,
readl(priv->smba + ISMT_MSTR_MCTRL));
dev_dbg(dev, " MSTS..... : (0x%p)=0x%X\n",
priv->smba + ISMT_MSTR_MSTS,
readl(priv->smba + ISMT_MSTR_MSTS));
dev_dbg(dev, " MDS...... : (0x%p)=0x%X\n",
priv->smba + ISMT_MSTR_MDS,
readl(priv->smba + ISMT_MSTR_MDS));
dev_dbg(dev, " RPOLICY.. : (0x%p)=0x%X\n",
priv->smba + ISMT_MSTR_RPOLICY,
readl(priv->smba + ISMT_MSTR_RPOLICY));
dev_dbg(dev, " SPGT..... : (0x%p)=0x%X\n",
priv->smba + ISMT_SPGT,
readl(priv->smba + ISMT_SPGT));
}
/**
* ismt_submit_desc() - add a descriptor to the ring
* @priv: iSMT private data
*/
static void ismt_submit_desc(struct ismt_priv *priv)
{
uint fmhp;
uint val;
ismt_desc_dump(priv);
ismt_gen_reg_dump(priv);
ismt_mstr_reg_dump(priv);
/* Set the FMHP (Firmware Master Head Pointer)*/
fmhp = ((priv->head + 1) % ISMT_DESC_ENTRIES) << 16;
val = readl(priv->smba + ISMT_MSTR_MCTRL);
writel((val & ~ISMT_MCTRL_FMHP) | fmhp,
priv->smba + ISMT_MSTR_MCTRL);
/* Set the start bit */
val = readl(priv->smba + ISMT_MSTR_MCTRL);
writel(val | ISMT_MCTRL_SS,
priv->smba + ISMT_MSTR_MCTRL);
}
/**
* ismt_process_desc() - handle the completion of the descriptor
* @desc: the iSMT hardware descriptor
* @data: data buffer from the upper layer
* @priv: ismt_priv struct holding our dma buffer
* @size: SMBus transaction type
* @read_write: flag to indicate if this is a read or write
*/
static int ismt_process_desc(const struct ismt_desc *desc,
union i2c_smbus_data *data,
struct ismt_priv *priv, int size,
char read_write)
{
u8 *dma_buffer = priv->dma_buffer;
dev_dbg(&priv->pci_dev->dev, "Processing completed descriptor\n");
__ismt_desc_dump(&priv->pci_dev->dev, desc);
ismt_gen_reg_dump(priv);
ismt_mstr_reg_dump(priv);
if (desc->status & ISMT_DESC_SCS) {
if (read_write == I2C_SMBUS_WRITE &&
size != I2C_SMBUS_PROC_CALL)
return 0;
switch (size) {
case I2C_SMBUS_BYTE:
case I2C_SMBUS_BYTE_DATA:
data->byte = dma_buffer[0];
break;
case I2C_SMBUS_WORD_DATA:
case I2C_SMBUS_PROC_CALL:
data->word = dma_buffer[0] | (dma_buffer[1] << 8);
break;
case I2C_SMBUS_BLOCK_DATA:
if (desc->rxbytes != dma_buffer[0] + 1)
return -EMSGSIZE;
memcpy(data->block, dma_buffer, desc->rxbytes);
break;
case I2C_SMBUS_I2C_BLOCK_DATA:
memcpy(&data->block[1], dma_buffer, desc->rxbytes);
data->block[0] = desc->rxbytes;
break;
}
return 0;
}
if (likely(desc->status & ISMT_DESC_NAK))
return -ENXIO;
if (desc->status & ISMT_DESC_CRC)
return -EBADMSG;
if (desc->status & ISMT_DESC_COL)
return -EAGAIN;
if (desc->status & ISMT_DESC_LPR)
return -EPROTO;
if (desc->status & (ISMT_DESC_DLTO | ISMT_DESC_CLTO))
return -ETIMEDOUT;
return -EIO;
}
/**
* ismt_access() - process an SMBus command
* @adap: the i2c host adapter
* @addr: address of the i2c/SMBus target
* @flags: command options
* @read_write: read from or write to device
* @command: the i2c/SMBus command to issue
* @size: SMBus transaction type
* @data: read/write data buffer
*/
static int ismt_access(struct i2c_adapter *adap, u16 addr,
unsigned short flags, char read_write, u8 command,
int size, union i2c_smbus_data *data)
{
int ret;
unsigned long time_left;
dma_addr_t dma_addr = 0; /* address of the data buffer */
u8 dma_size = 0;
enum dma_data_direction dma_direction = 0;
struct ismt_desc *desc;
struct ismt_priv *priv = i2c_get_adapdata(adap);
struct device *dev = &priv->pci_dev->dev;
desc = &priv->hw[priv->head];
/* Initialize the DMA buffer */
memset(priv->dma_buffer, 0, sizeof(priv->dma_buffer));
/* Initialize the descriptor */
memset(desc, 0, sizeof(struct ismt_desc));
desc->tgtaddr_rw = ISMT_DESC_ADDR_RW(addr, read_write);
/* Initialize common control bits */
if (likely(pci_dev_msi_enabled(priv->pci_dev)))
desc->control = ISMT_DESC_INT | ISMT_DESC_FAIR;
else
desc->control = ISMT_DESC_FAIR;
if ((flags & I2C_CLIENT_PEC) && (size != I2C_SMBUS_QUICK)
&& (size != I2C_SMBUS_I2C_BLOCK_DATA))
desc->control |= ISMT_DESC_PEC;
switch (size) {
case I2C_SMBUS_QUICK:
dev_dbg(dev, "I2C_SMBUS_QUICK\n");
break;
case I2C_SMBUS_BYTE:
if (read_write == I2C_SMBUS_WRITE) {
/*
* Send Byte
* The command field contains the write data
*/
dev_dbg(dev, "I2C_SMBUS_BYTE: WRITE\n");
desc->control |= ISMT_DESC_CWRL;
desc->wr_len_cmd = command;
} else {
/* Receive Byte */
dev_dbg(dev, "I2C_SMBUS_BYTE: READ\n");
dma_size = 1;
dma_direction = DMA_FROM_DEVICE;
desc->rd_len = 1;
}
break;
case I2C_SMBUS_BYTE_DATA:
if (read_write == I2C_SMBUS_WRITE) {
/*
* Write Byte
* Command plus 1 data byte
*/
dev_dbg(dev, "I2C_SMBUS_BYTE_DATA: WRITE\n");
desc->wr_len_cmd = 2;
dma_size = 2;
dma_direction = DMA_TO_DEVICE;
priv->dma_buffer[0] = command;
priv->dma_buffer[1] = data->byte;
} else {
/* Read Byte */
dev_dbg(dev, "I2C_SMBUS_BYTE_DATA: READ\n");
desc->control |= ISMT_DESC_CWRL;
desc->wr_len_cmd = command;
desc->rd_len = 1;
dma_size = 1;
dma_direction = DMA_FROM_DEVICE;
}
break;
case I2C_SMBUS_WORD_DATA:
if (read_write == I2C_SMBUS_WRITE) {
/* Write Word */
dev_dbg(dev, "I2C_SMBUS_WORD_DATA: WRITE\n");
desc->wr_len_cmd = 3;
dma_size = 3;
dma_direction = DMA_TO_DEVICE;
priv->dma_buffer[0] = command;
priv->dma_buffer[1] = data->word & 0xff;
priv->dma_buffer[2] = data->word >> 8;
} else {
/* Read Word */
dev_dbg(dev, "I2C_SMBUS_WORD_DATA: READ\n");
desc->wr_len_cmd = command;
desc->control |= ISMT_DESC_CWRL;
desc->rd_len = 2;
dma_size = 2;
dma_direction = DMA_FROM_DEVICE;
}
break;
case I2C_SMBUS_PROC_CALL:
dev_dbg(dev, "I2C_SMBUS_PROC_CALL\n");
desc->wr_len_cmd = 3;
desc->rd_len = 2;
dma_size = 3;
dma_direction = DMA_BIDIRECTIONAL;
priv->dma_buffer[0] = command;
priv->dma_buffer[1] = data->word & 0xff;
priv->dma_buffer[2] = data->word >> 8;
break;
case I2C_SMBUS_BLOCK_DATA:
if (read_write == I2C_SMBUS_WRITE) {
/* Block Write */
dev_dbg(dev, "I2C_SMBUS_BLOCK_DATA: WRITE\n");
dma_size = data->block[0] + 1;
dma_direction = DMA_TO_DEVICE;
desc->wr_len_cmd = dma_size;
desc->control |= ISMT_DESC_BLK;
priv->dma_buffer[0] = command;
memcpy(&priv->dma_buffer[1], &data->block[1], dma_size - 1);
} else {
/* Block Read */
dev_dbg(dev, "I2C_SMBUS_BLOCK_DATA: READ\n");
dma_size = I2C_SMBUS_BLOCK_MAX;
dma_direction = DMA_FROM_DEVICE;
desc->rd_len = dma_size;
desc->wr_len_cmd = command;
desc->control |= (ISMT_DESC_BLK | ISMT_DESC_CWRL);
}
break;
case I2C_SMBUS_I2C_BLOCK_DATA:
/* Make sure the length is valid */
if (data->block[0] < 1)
data->block[0] = 1;
if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
data->block[0] = I2C_SMBUS_BLOCK_MAX;
if (read_write == I2C_SMBUS_WRITE) {
/* i2c Block Write */
dev_dbg(dev, "I2C_SMBUS_I2C_BLOCK_DATA: WRITE\n");
dma_size = data->block[0] + 1;
dma_direction = DMA_TO_DEVICE;
desc->wr_len_cmd = dma_size;
desc->control |= ISMT_DESC_I2C;
priv->dma_buffer[0] = command;
memcpy(&priv->dma_buffer[1], &data->block[1], dma_size - 1);
} else {
/* i2c Block Read */
dev_dbg(dev, "I2C_SMBUS_I2C_BLOCK_DATA: READ\n");
dma_size = data->block[0];
dma_direction = DMA_FROM_DEVICE;
desc->rd_len = dma_size;
desc->wr_len_cmd = command;
desc->control |= (ISMT_DESC_I2C | ISMT_DESC_CWRL);
/*
* Per the "Table 15-15. I2C Commands",
* in the External Design Specification (EDS),
* (Document Number: 508084, Revision: 2.0),
* the _rw bit must be 0
*/
desc->tgtaddr_rw = ISMT_DESC_ADDR_RW(addr, 0);
}
break;
default:
dev_err(dev, "Unsupported transaction %d\n",
size);
return -EOPNOTSUPP;
}
/* map the data buffer */
if (dma_size != 0) {
dev_dbg(dev, " dev=%p\n", dev);
dev_dbg(dev, " data=%p\n", data);
dev_dbg(dev, " dma_buffer=%p\n", priv->dma_buffer);
dev_dbg(dev, " dma_size=%d\n", dma_size);
dev_dbg(dev, " dma_direction=%d\n", dma_direction);
dma_addr = dma_map_single(dev,
priv->dma_buffer,
dma_size,
dma_direction);
if (dma_mapping_error(dev, dma_addr)) {
dev_err(dev, "Error in mapping dma buffer %p\n",
priv->dma_buffer);
return -EIO;
}
dev_dbg(dev, " dma_addr = %pad\n", &dma_addr);
desc->dptr_low = lower_32_bits(dma_addr);
desc->dptr_high = upper_32_bits(dma_addr);
}
reinit_completion(&priv->cmp);
/* Add the descriptor */
ismt_submit_desc(priv);
/* Now we wait for interrupt completion, 1s */
time_left = wait_for_completion_timeout(&priv->cmp, HZ*1);
/* unmap the data buffer */
if (dma_size != 0)
dma_unmap_single(dev, dma_addr, dma_size, dma_direction);
if (unlikely(!time_left)) {
dev_err(dev, "completion wait timed out\n");
ret = -ETIMEDOUT;
goto out;
}
/* do any post processing of the descriptor here */
ret = ismt_process_desc(desc, data, priv, size, read_write);
out:
/* Update the ring pointer */
priv->head++;
priv->head %= ISMT_DESC_ENTRIES;
return ret;
}
/**
* ismt_func() - report which i2c commands are supported by this adapter
* @adap: the i2c host adapter
*/
static u32 ismt_func(struct i2c_adapter *adap)
{
return I2C_FUNC_SMBUS_QUICK |
I2C_FUNC_SMBUS_BYTE |
I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_WORD_DATA |
I2C_FUNC_SMBUS_PROC_CALL |
I2C_FUNC_SMBUS_BLOCK_DATA |
I2C_FUNC_SMBUS_I2C_BLOCK |
I2C_FUNC_SMBUS_PEC;
}
/**
* smbus_algorithm - the adapter algorithm and supported functionality
* @smbus_xfer: the adapter algorithm
* @functionality: functionality supported by the adapter
*/
static const struct i2c_algorithm smbus_algorithm = {
.smbus_xfer = ismt_access,
.functionality = ismt_func,
};
/**
* ismt_handle_isr() - interrupt handler bottom half
* @priv: iSMT private data
*/
static irqreturn_t ismt_handle_isr(struct ismt_priv *priv)
{
complete(&priv->cmp);
return IRQ_HANDLED;
}
/**
* ismt_do_interrupt() - IRQ interrupt handler
* @vec: interrupt vector
* @data: iSMT private data
*/
static irqreturn_t ismt_do_interrupt(int vec, void *data)
{
u32 val;
struct ismt_priv *priv = data;
/*
* check to see it's our interrupt, return IRQ_NONE if not ours
* since we are sharing interrupt
*/
val = readl(priv->smba + ISMT_MSTR_MSTS);
if (!(val & (ISMT_MSTS_MIS | ISMT_MSTS_MEIS)))
return IRQ_NONE;
else
writel(val | ISMT_MSTS_MIS | ISMT_MSTS_MEIS,
priv->smba + ISMT_MSTR_MSTS);
return ismt_handle_isr(priv);
}
/**
* ismt_do_msi_interrupt() - MSI interrupt handler
* @vec: interrupt vector
* @data: iSMT private data
*/
static irqreturn_t ismt_do_msi_interrupt(int vec, void *data)
{
return ismt_handle_isr(data);
}
/**
* ismt_hw_init() - initialize the iSMT hardware
* @priv: iSMT private data
*/
static void ismt_hw_init(struct ismt_priv *priv)
{
u32 val;
struct device *dev = &priv->pci_dev->dev;
/* initialize the Master Descriptor Base Address (MDBA) */
writeq(priv->io_rng_dma, priv->smba + ISMT_MSTR_MDBA);
/* initialize the Master Control Register (MCTRL) */
writel(ISMT_MCTRL_MEIE, priv->smba + ISMT_MSTR_MCTRL);
/* initialize the Master Status Register (MSTS) */
writel(0, priv->smba + ISMT_MSTR_MSTS);
/* initialize the Master Descriptor Size (MDS) */
val = readl(priv->smba + ISMT_MSTR_MDS);
writel((val & ~ISMT_MDS_MASK) | (ISMT_DESC_ENTRIES - 1),
priv->smba + ISMT_MSTR_MDS);
/*
* Set the SMBus speed (could use this for slow HW debuggers)
*/
val = readl(priv->smba + ISMT_SPGT);
switch (bus_speed) {
case 0:
break;
case 80:
dev_dbg(dev, "Setting SMBus clock to 80 kHz\n");
writel(((val & ~ISMT_SPGT_SPD_MASK) | ISMT_SPGT_SPD_80K),
priv->smba + ISMT_SPGT);
break;
case 100:
dev_dbg(dev, "Setting SMBus clock to 100 kHz\n");
writel(((val & ~ISMT_SPGT_SPD_MASK) | ISMT_SPGT_SPD_100K),
priv->smba + ISMT_SPGT);
break;
case 400:
dev_dbg(dev, "Setting SMBus clock to 400 kHz\n");
writel(((val & ~ISMT_SPGT_SPD_MASK) | ISMT_SPGT_SPD_400K),
priv->smba + ISMT_SPGT);
break;
case 1000:
dev_dbg(dev, "Setting SMBus clock to 1000 kHz\n");
writel(((val & ~ISMT_SPGT_SPD_MASK) | ISMT_SPGT_SPD_1M),
priv->smba + ISMT_SPGT);
break;
default:
dev_warn(dev, "Invalid SMBus clock speed, only 0, 80, 100, 400, and 1000 are valid\n");
break;
}
val = readl(priv->smba + ISMT_SPGT);
switch (val & ISMT_SPGT_SPD_MASK) {
case ISMT_SPGT_SPD_80K:
bus_speed = 80;
break;
case ISMT_SPGT_SPD_100K:
bus_speed = 100;
break;
case ISMT_SPGT_SPD_400K:
bus_speed = 400;
break;
case ISMT_SPGT_SPD_1M:
bus_speed = 1000;
break;
}
dev_dbg(dev, "SMBus clock is running at %d kHz\n", bus_speed);
}
/**
* ismt_dev_init() - initialize the iSMT data structures
* @priv: iSMT private data
*/
static int ismt_dev_init(struct ismt_priv *priv)
{
/* allocate memory for the descriptor */
priv->hw = dmam_alloc_coherent(&priv->pci_dev->dev,
(ISMT_DESC_ENTRIES
* sizeof(struct ismt_desc)),
&priv->io_rng_dma,
GFP_KERNEL);
if (!priv->hw)
return -ENOMEM;
memset(priv->hw, 0, (ISMT_DESC_ENTRIES * sizeof(struct ismt_desc)));
priv->head = 0;
init_completion(&priv->cmp);
return 0;
}
/**
* ismt_int_init() - initialize interrupts
* @priv: iSMT private data
*/
static int ismt_int_init(struct ismt_priv *priv)
{
int err;
/* Try using MSI interrupts */
err = pci_enable_msi(priv->pci_dev);
if (err)
goto intx;
err = devm_request_irq(&priv->pci_dev->dev,
priv->pci_dev->irq,
ismt_do_msi_interrupt,
0,
"ismt-msi",
priv);
if (err) {
pci_disable_msi(priv->pci_dev);
goto intx;
}
return 0;
/* Try using legacy interrupts */
intx:
dev_warn(&priv->pci_dev->dev,
"Unable to use MSI interrupts, falling back to legacy\n");
err = devm_request_irq(&priv->pci_dev->dev,
priv->pci_dev->irq,
ismt_do_interrupt,
IRQF_SHARED,
"ismt-intx",
priv);
if (err) {
dev_err(&priv->pci_dev->dev, "no usable interrupts\n");
return err;
}
return 0;
}
static struct pci_driver ismt_driver;
/**
* ismt_probe() - probe for iSMT devices
* @pdev: PCI-Express device
* @id: PCI-Express device ID
*/
static int
ismt_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
int err;
struct ismt_priv *priv;
unsigned long start, len;
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
pci_set_drvdata(pdev, priv);
i2c_set_adapdata(&priv->adapter, priv);
priv->adapter.owner = THIS_MODULE;
priv->adapter.class = I2C_CLASS_HWMON;
priv->adapter.algo = &smbus_algorithm;
priv->adapter.dev.parent = &pdev->dev;
ACPI_COMPANION_SET(&priv->adapter.dev, ACPI_COMPANION(&pdev->dev));
priv->adapter.retries = ISMT_MAX_RETRIES;
priv->pci_dev = pdev;
err = pcim_enable_device(pdev);
if (err) {
dev_err(&pdev->dev, "Failed to enable SMBus PCI device (%d)\n",
err);
return err;
}
/* enable bus mastering */
pci_set_master(pdev);
/* Determine the address of the SMBus area */
start = pci_resource_start(pdev, SMBBAR);
len = pci_resource_len(pdev, SMBBAR);
if (!start || !len) {
dev_err(&pdev->dev,
"SMBus base address uninitialized, upgrade BIOS\n");
return -ENODEV;
}
snprintf(priv->adapter.name, sizeof(priv->adapter.name),
"SMBus iSMT adapter at %lx", start);
dev_dbg(&priv->pci_dev->dev, " start=0x%lX\n", start);
dev_dbg(&priv->pci_dev->dev, " len=0x%lX\n", len);
err = acpi_check_resource_conflict(&pdev->resource[SMBBAR]);
if (err) {
dev_err(&pdev->dev, "ACPI resource conflict!\n");
return err;
}
err = pci_request_region(pdev, SMBBAR, ismt_driver.name);
if (err) {
dev_err(&pdev->dev,
"Failed to request SMBus region 0x%lx-0x%lx\n",
start, start + len);
return err;
}
priv->smba = pcim_iomap(pdev, SMBBAR, len);
if (!priv->smba) {
dev_err(&pdev->dev, "Unable to ioremap SMBus BAR\n");
return -ENODEV;
}
if ((pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0) ||
(pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)) != 0)) {
if ((pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) ||
(pci_set_consistent_dma_mask(pdev,
DMA_BIT_MASK(32)) != 0)) {
dev_err(&pdev->dev, "pci_set_dma_mask fail %p\n",
pdev);
return -ENODEV;
}
}
err = ismt_dev_init(priv);
if (err)
return err;
ismt_hw_init(priv);
err = ismt_int_init(priv);
if (err)
return err;
err = i2c_add_adapter(&priv->adapter);
if (err)
return -ENODEV;
return 0;
}
/**
* ismt_remove() - release driver resources
* @pdev: PCI-Express device
*/
static void ismt_remove(struct pci_dev *pdev)
{
struct ismt_priv *priv = pci_get_drvdata(pdev);
i2c_del_adapter(&priv->adapter);
}
static struct pci_driver ismt_driver = {
.name = "ismt_smbus",
.id_table = ismt_ids,
.probe = ismt_probe,
.remove = ismt_remove,
};
module_pci_driver(ismt_driver);
MODULE_LICENSE("Dual BSD/GPL");
MODULE_AUTHOR("Bill E. Brown <bill.e.brown@intel.com>");
MODULE_DESCRIPTION("Intel SMBus Message Transport (iSMT) driver");