forked from Minki/linux
aaa080fa7e
The Tanix TX3 Mini is a TV box based on the Amlogic S905W chipset. There are two variants: - 1 GiB or 2 GiB of DDR3 memory - 8 GB or 16 GB eMMC flash Both variants come with: - 802.11 b/g/n wifi (Silicon Valley Microelectronics SSV6051, does not support Bluetooth) - an LED 7 segment display with an FD628 controller - HDMI and AV (CVBS) output - 2x USB (utilizing both USB ports provided by the SoC) - micro SD card slot - serial console (uart_AO) has to be soldered after opening the case The board seems to be very similar to the P23x and Q20x reference boards, which is why it includes meson-gx-p23x-q20x.dtsi: - eMMC reset routed to BOOT_9 - the SDIO wifi chip's reset line is routed to GPIOX_6 and the reference clock is 32.768KHz on PWM_E - SD card detection is routed to CARD_6 - vqmmc of all MMC controllers is hard-wired to 1.8V (VDDIO_BOOT) - uart_AO can be accessed after opening the case and soldering RX, TX and GND lines onto the exposed solder points (marked with RX, TX and GND) Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> |
||
|---|---|---|
| .. | ||
| boot | ||
| configs | ||
| crypto | ||
| include | ||
| kernel | ||
| kvm | ||
| lib | ||
| mm | ||
| net | ||
| xen | ||
| Kconfig | ||
| Kconfig.debug | ||
| Kconfig.platforms | ||
| Makefile | ||