linux/drivers/net/wireless/ti/wl1251
Avraham Stern 7947d3e075 mac80211: Add support for beacon report radio measurement
Add the following to support beacon report radio measurement
with the measurement mode field set to passive or active:
1. Propagate the required scan duration to the device
2. Report the scan start time (in terms of TSF)
3. Report each BSS's detection time (also in terms of TSF)

TSF times refer to the BSS that the interface that requested the
scan is connected to.

Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
[changed ath9k/10k, at76c59x-usb, iwlegacy, wl1251 and wlcore to match
the new API]
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-07-06 14:53:19 +02:00
..
acx.c wl1251: drop unneeded goto 2015-06-08 11:38:18 +03:00
acx.h wl1251: implement multicast address filtering (fwd) 2014-01-09 10:56:06 -05:00
boot.c wl1251: retry power save entry 2014-01-09 10:53:38 -05:00
boot.h
cmd.c lib/crc7: Shift crc7() output left 1 bit 2014-05-16 14:26:52 -04:00
cmd.h wl1251: split RX and TX data path initialisation 2014-01-09 10:53:39 -05:00
debugfs.c
debugfs.h
event.c mac80211: Add support for beacon report radio measurement 2016-07-06 14:53:19 +02:00
event.h wl1251: retry power save entry 2014-01-09 10:53:38 -05:00
init.c wl1251: implement multicast address filtering (fwd) 2014-01-09 10:56:06 -05:00
init.h
io.c
io.h
Kconfig ti: unify Kconfig with other vendors 2015-11-18 14:28:31 +02:00
main.c mac80211: Add support for beacon report radio measurement 2016-07-06 14:53:19 +02:00
Makefile
ps.c wl1251: use to_delayed_work() 2016-04-07 19:37:37 +03:00
ps.h
reg.h
rx.c cfg80211: remove enum ieee80211_band 2016-04-12 15:56:15 +02:00
rx.h
sdio.c wl1251: move power GPIO handling into the driver 2014-02-28 14:08:26 -05:00
spi.c spi: Drop owner assignment from spi_drivers 2015-10-28 10:30:17 +09:00
spi.h
tx.c wl1251: disable retry and ACK policy for injected packets 2014-01-09 10:56:36 -05:00
tx.h
wl12xx_80211.h
wl1251.h wl1251: spi: add vio regulator support 2014-02-28 14:08:27 -05:00