linux/drivers/ide
Sergei Shtylyov a9ddabc52c cmd640: fix kernel oops in test_irq() method
When implementing the test_iqr() method, I forgot that this driver is not an
ordinary PCI driver and also needs to support VLB variant of the chip. Moreover,
'hwif->dev' should be NULL, potentially causing oops in pci_read_config_byte().

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-11 00:08:03 -07:00
..
aec62xx.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
ali14xx.c ide: change ->set_pio_mode method parameters 2010-01-19 01:44:41 -08:00
alim15x3.c alim15x3: fix handling of UDMA enable bit 2010-01-19 01:52:31 -08:00
amd74xx.c amd74xx: use ->pio_mode value to determine pair device speed 2010-01-19 01:52:32 -08:00
at91_ide.c ide: change ->set_pio_mode method parameters 2010-01-19 01:44:41 -08:00
atiixp.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
au1xxx-ide.c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-next-2.6 2010-03-04 08:24:06 -08:00
buddha.c ide: move ack_intr() method into 'struct ide_port_ops' (take 2) 2009-06-15 18:52:58 +02:00
cmd64x.c cmd64x: fix handling of address setup timings 2010-01-19 01:52:32 -08:00
cmd640.c cmd640: fix kernel oops in test_irq() method 2010-05-11 00:08:03 -07:00
cs5520.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
cs5530.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
cs5535.c cs5535: use ->pio_mode value to determine pair device speed 2010-01-19 01:52:33 -08:00
cs5536.c cs5536: use ->pio_mode value to determine pair device speed 2010-01-19 01:52:33 -08:00
cy82c693.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
delkin_cb.c ide: remove hw_regs_t typedef 2009-05-17 19:12:25 +02:00
dtc2278.c ide: change ->set_pio_mode method parameters 2010-01-19 01:44:41 -08:00
falconide.c ide: move ack_intr() method into 'struct ide_port_ops' (take 2) 2009-06-15 18:52:58 +02:00
gayle.c ide: move ack_intr() method into 'struct ide_port_ops' (take 2) 2009-06-15 18:52:58 +02:00
hpt366.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
ht6560b.c ide: change ->set_pio_mode method parameters 2010-01-19 01:44:41 -08:00
icside.c Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/ide-2.6 2010-03-02 23:57:59 -08:00
ide_platform.c IDE: pass IRQ flags to the IDE core 2010-04-15 14:20:53 -07:00
ide-4drives.c ide: remove hw_regs_t typedef 2009-05-17 19:12:25 +02:00
ide-acpi.c ACPI: replace acpi_integer by u64 2010-01-28 01:47:33 -05:00
ide-atapi.c ide: Must hold queue lock when requeueing 2010-04-01 01:31:14 -07:00
ide-cd_ioctl.c ide: remove IDE_AFLAG_NO_DOORLOCKING 2008-10-17 18:09:11 +02:00
ide-cd_verbose.c block: replace sizeof(rq->cmd) with BLK_MAX_CDB 2008-04-29 14:48:55 +02:00
ide-cd.c const: make block_device_operations const 2009-09-22 07:17:25 -07:00
ide-cd.h ide-cd: convert to using generic sense request 2009-04-28 07:37:30 +02:00
ide-cs.c ide/ide-cs: fix order of releasing resources 2010-01-15 01:33:08 -08:00
ide-devsets.c ide: change ->set_pio_mode method parameters 2010-01-19 01:44:41 -08:00
ide-disk_ioctl.c [PATCH] switch ide_disk_ops ->ioctl() to sane prototype 2008-10-21 07:47:30 -04:00
ide-disk_proc.c ide: convert to ->proc_fops 2009-09-01 17:52:57 -07:00
ide-disk.c block: Rename blk_queue_max_sectors to blk_queue_max_hw_sectors 2010-02-26 13:58:08 +01:00
ide-disk.h [PATCH] switch ide_disk_ops ->ioctl() to sane prototype 2008-10-21 07:47:30 -04:00
ide-dma-sff.c ide: remove wmb() from ide-dma-sff.c and scc_pata.c 2009-04-08 14:12:49 +02:00
ide-dma.c ide: Requeue request after DMA timeout 2010-04-01 01:31:13 -07:00
ide-eh.c ide: always kill the whole request on error 2009-06-25 23:57:16 -07:00
ide-floppy_ioctl.c ide-atapi: remove pc->buf 2009-05-15 06:44:38 +02:00
ide-floppy_proc.c ide: convert to ->proc_fops 2009-09-01 17:52:57 -07:00
ide-floppy.c block: Rename blk_queue_max_sectors to blk_queue_max_hw_sectors 2010-02-26 13:58:08 +01:00
ide-floppy.h [PATCH] switch ide_disk_ops ->ioctl() to sane prototype 2008-10-21 07:47:30 -04:00
ide-gd.c const: make block_device_operations const 2009-09-22 07:17:25 -07:00
ide-gd.h ide: move ->failed_pc to ide_drive_t 2009-03-27 12:46:34 +01:00
ide-generic.c ide: remove hw_regs_t typedef 2009-05-17 19:12:25 +02:00
ide-h8300.c ide: remove hw_regs_t typedef 2009-05-17 19:12:25 +02:00
ide-io-std.c ide: refactor tf_read() method 2009-04-08 14:13:03 +02:00
ide-io.c ide: Requeue request after DMA timeout 2010-04-01 01:31:13 -07:00
ide-ioctls.c ide: fix ioctl to pass requested transfer mode to ide_find_dma_mode instead of UDMA6 2009-11-25 15:04:54 -08:00
ide-iops.c ide: add SATA cable detection support 2010-01-19 01:41:57 -08:00
ide-legacy.c ide: remove hw_regs_t typedef 2009-05-17 19:12:25 +02:00
ide-lib.c Merge branch 'master' into for-2.6.31 2009-05-22 20:28:35 +02:00
ide-park.c ide: use blk_run_queue() instead of blk_start_queueing() 2009-04-28 07:37:28 +02:00
ide-pci-generic.c pata_piccolo: Driver for old Toshiba chipsets 2009-12-03 14:35:31 -05:00
ide-pio-blacklist.c ide: move PIO blacklist to ide-pio-blacklist.c 2008-07-16 20:33:39 +02:00
ide-pm.c ide: fix resume for CONFIG_BLK_DEV_IDEACPI=y 2009-06-29 19:20:42 -07:00
ide-pnp.c ide: remove hw_regs_t typedef 2009-05-17 19:12:25 +02:00
ide-probe.c Revert "ide: skip probe if there are no devices on the port (v2)" 2010-03-28 18:58:28 -07:00
ide-proc.c ide: use printk_once 2009-09-22 16:29:00 -07:00
ide-scan-pci.c ide: replace remaining __FUNCTION__ occurrences 2008-04-26 22:25:20 +02:00
ide-sysfs.c ide: move sysfs support to ide-sysfs.c 2009-01-02 16:12:48 +01:00
ide-tape.c ide_tape: kill off use of the ->ioctl operation 2010-01-12 01:56:54 -08:00
ide-taskfile.c ide: Fix IDE taskfile with cfq scheduler 2010-04-06 16:43:33 -07:00
ide-timings.c ide: ide_timing_compute() fixup 2010-01-19 11:30:09 -08:00
ide-xfer-mode.c ide: make ide_get_best_pio_mode() static 2010-01-19 01:52:36 -08:00
ide.c ide: preserve Host Protected Area by default (v2) 2009-06-07 13:52:52 +02:00
it821x.c it821x: use ->pio_mode value to determine pair device speed 2010-01-19 01:52:34 -08:00
it8172.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
it8213.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
jmicron.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
Kconfig ide: update Kconfig text to mark as deprecated 2009-10-29 03:09:26 -07:00
macide.c ide: move ack_intr() method into 'struct ide_port_ops' (take 2) 2009-06-15 18:52:58 +02:00
Makefile ide: merge ide_arm and ide_generic host drivers 2009-03-31 20:15:24 +02:00
ns87415.c ide: refactor tf_read() method 2009-04-08 14:13:03 +02:00
opti621.c ide: change ->set_pio_mode method parameters 2010-01-19 01:44:41 -08:00
palm_bk3710.c palm_bk3710: use ->pio_mode value to determine pair device speed 2010-01-19 01:52:34 -08:00
pdc202xx_new.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
pdc202xx_old.c pdc202xx_old: ignore "FIFO empty" bit in test_irq() method 2010-04-22 19:11:24 -07:00
piix.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
pmac.c drivers/ide: Fix continuation line formats 2010-02-03 18:44:44 -08:00
q40ide.c ide: move ack_intr() method into 'struct ide_port_ops' (take 2) 2009-06-15 18:52:58 +02:00
qd65xx.c ide: change ->set_pio_mode method parameters 2010-01-19 01:44:41 -08:00
qd65xx.h ide: do not access ide_drive_t 'drive_data' field directly 2009-06-15 22:13:44 +02:00
rapide.c ide: remove hw_regs_t typedef 2009-05-17 19:12:25 +02:00
rz1000.c rz1000: apply chipset quirks early (v2) 2008-12-29 20:27:33 +01:00
sc1200.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
scc_pata.c Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/ide-2.6 2010-03-02 23:57:59 -08:00
serverworks.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
setup-pci.c ide: re-implement ide_pci_init_one() on top of ide_pci_init_two() 2009-06-10 14:37:21 +02:00
sgiioc4.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
siimage.c siimage: use ->pio_mode value to determine pair device speed 2010-01-19 01:52:35 -08:00
sis5513.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
sl82c105.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
slc90e66.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
tc86c001.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
triflex.c ide: change ->set_dma_mode method parameters 2010-01-19 01:45:29 -08:00
trm290.c ide: turn selectproc() method into dev_select() method (take 5) 2009-03-31 20:15:32 +02:00
tx4938ide.c tx493xide: use ->pio_mode value to determine pair device speed 2010-01-19 01:52:35 -08:00
tx4939ide.c tx493xide: use ->pio_mode value to determine pair device speed 2010-01-19 01:52:35 -08:00
umc8672.c ide: change ->set_pio_mode method parameters 2010-01-19 01:44:41 -08:00
via82cxxx.c Revert "via82cxxx: workaround h/w bugs" 2010-03-27 07:55:58 -07:00