linux/drivers/usb
Hans de Goede a9c54caa45 uas: Disable uas on ASM1051 devices
There are a large numbers of issues with ASM1051 devices in uas mode:

1) They do not support REPORT SUPPORTED OPERATION CODES

2) They use out of spec 8 byte status iu-s when they have no sense data,
   switching to normal 16 byte status iu-s when they do have sense data.

3) They hang / crash when combined with some disks, e.g. a Crucial M500 ssd.

4) They hang / crash when stressed (through e.g. sg_reset --bus) with disks
   with which then normally do work (once 1 & 2 are worked around).

Where as in BOT mode they appear to work fine, so the best way forward with
these devices is to just blacklist them for uas usage.

Unfortunately this is easier said then done. as older versions of the ASM1053
(which works fine) use the same usb-id as the ASM1051.

When connected over USB-3 the 2 can be told apart by the number of streams
they support. So this patch adds some less then pretty code to disable uas for
the ASM1051. When connected over USB-2, simply disable uas alltogether for
devices with the shared usb-id.

Cc: stable@vger.kernel.org # 3.16
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-10 13:32:35 -07:00
..
atm usb: delete non-required instances of include <linux/init.h> 2014-01-08 15:01:39 -08:00
c67x00 USB: c67x00: correct spelling mistakes in comments 2014-01-08 15:05:14 -08:00
chipidea USB patches for 3.17-rc1 2014-08-04 20:11:28 -07:00
class usb: class: usbtmc.c: Cleaning up uninitialized variables 2014-07-09 15:59:10 -07:00
common usb: common: rename phy-fsm-usb.c to usb-otg-fsm.c 2014-05-27 15:29:44 -07:00
core USB: fix build error with CONFIG_PM_RUNTIME disabled 2014-08-27 16:55:29 -07:00
dwc2 usb: dwc2/gadget: avoid disabling ep0 2014-09-09 10:17:48 -07:00
dwc3 usb: dwc3: omap: signedness bug in dwc3_omap_set_utmi_mode() 2014-08-19 09:24:48 -05:00
early USB: ehci-dbgp: drop dead code. 2013-09-26 16:25:21 -07:00
gadget usb: gadget: f_fs: fix the redundant ep files problem 2014-09-03 09:15:59 -05:00
host usb: host: xhci: fix compliance mode workaround 2014-09-08 14:30:42 -07:00
image USB: image: correct spelling mistake in comment 2014-01-08 15:08:14 -08:00
misc USB: sisusb: add device id for Magic Control USB video 2014-08-26 12:07:46 -07:00
mon
musb usb: musb: cppi41: fix not transmitting zero length packet issue 2014-09-03 09:15:56 -05:00
phy usb: phy: tegra: Avoid use of sizeof(void) 2014-09-03 09:16:01 -05:00
renesas_usbhs usb: renesas_usbhs: fix the usb_pkt_pop() 2014-09-03 09:15:58 -05:00
serial USB: ftdi_sio: Add support for GE Healthcare Nemo Tracker device 2014-09-08 16:01:59 -07:00
storage uas: Disable uas on ASM1051 devices 2014-09-10 13:32:35 -07:00
usbip usbip: remove struct usb_device_id table 2014-08-25 10:40:58 -07:00
wusbcore usb: wusbcore: fix below build warning 2014-08-19 11:28:53 -05:00
Kconfig usbip: move usbip kernel code out of staging 2014-08-25 10:40:06 -07:00
Makefile usbip: move usbip kernel code out of staging 2014-08-25 10:40:06 -07:00
README
usb-skeleton.c usb: delete non-required instances of include <linux/init.h> 2014-01-08 15:01:39 -08:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.