forked from Minki/linux
40aad3c1a9
The device_type property is deprecated for the flattened device tree and the value "ethernet-phy" has never been defined as having a useful meaning. Neither the kernel nor u-boot depend on it. It should never have appeared in PHY bindings. This patch removes all references to "ethernet-phy" as a device_type value from the documentation and the .dts files. This patch was generated mechanically with the following command and then verified by looking at the diff. sed -i '/"ethernet-phy"/d' `git grep -l '"ethernet-phy"'` Signed-off-by: Grant Likely <grant.likely@linaro.org> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
183 lines
3.9 KiB
Plaintext
183 lines
3.9 KiB
Plaintext
/*
|
|
* Device Tree Source for MPC885 ADS running U-Boot
|
|
*
|
|
* Copyright 2006 MontaVista Software, Inc.
|
|
* Copyright 2007 Freescale Semiconductor, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
/ {
|
|
model = "Analogue & Micro Adder MPC875";
|
|
compatible = "analogue-and-micro,adder875";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
aliases {
|
|
console = &console;
|
|
ethernet0 = ð0;
|
|
ethernet1 = ð1;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
PowerPC,875@0 {
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
d-cache-line-size = <16>;
|
|
i-cache-line-size = <16>;
|
|
d-cache-size = <8192>;
|
|
i-cache-size = <8192>;
|
|
timebase-frequency = <0>;
|
|
bus-frequency = <0>;
|
|
clock-frequency = <0>;
|
|
interrupts = <15 2>; // decrementer interrupt
|
|
interrupt-parent = <&PIC>;
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0 0x01000000>;
|
|
};
|
|
|
|
localbus@ff000100 {
|
|
compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus",
|
|
"simple-bus";
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
reg = <0xff000100 0x40>;
|
|
|
|
ranges = <
|
|
0 0 0xfe000000 0x01000000
|
|
>;
|
|
|
|
flash@0,0 {
|
|
compatible = "cfi-flash";
|
|
reg = <0 0 0x800000>;
|
|
bank-width = <2>;
|
|
device-width = <2>;
|
|
};
|
|
};
|
|
|
|
soc@ff000000 {
|
|
compatible = "fsl,mpc875-immr", "fsl,pq1-soc", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0xff000000 0x00004000>;
|
|
|
|
// Temporary until code stops depending on it.
|
|
device_type = "soc";
|
|
|
|
// Temporary until get_immrbase() is fixed.
|
|
reg = <0xff000000 0x4000>;
|
|
|
|
mdio@e00 {
|
|
compatible = "fsl,mpc875-fec-mdio", "fsl,pq1-fec-mdio";
|
|
reg = <0xe00 0x188>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
PHY0: ethernet-phy@0 {
|
|
reg = <0>;
|
|
};
|
|
|
|
PHY1: ethernet-phy@1 {
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
eth0: ethernet@e00 {
|
|
device_type = "network";
|
|
compatible = "fsl,mpc875-fec-enet",
|
|
"fsl,pq1-fec-enet";
|
|
reg = <0xe00 0x188>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
interrupts = <3 1>;
|
|
interrupt-parent = <&PIC>;
|
|
phy-handle = <&PHY0>;
|
|
linux,network-index = <0>;
|
|
};
|
|
|
|
eth1: ethernet@1e00 {
|
|
device_type = "network";
|
|
compatible = "fsl,mpc875-fec-enet",
|
|
"fsl,pq1-fec-enet";
|
|
reg = <0x1e00 0x188>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
interrupts = <7 1>;
|
|
interrupt-parent = <&PIC>;
|
|
phy-handle = <&PHY1>;
|
|
linux,network-index = <1>;
|
|
};
|
|
|
|
PIC: interrupt-controller@0 {
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0 0x24>;
|
|
compatible = "fsl,mpc875-pic", "fsl,pq1-pic";
|
|
};
|
|
|
|
cpm@9c0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,mpc875-cpm", "fsl,cpm1", "simple-bus";
|
|
interrupts = <0>; // cpm error interrupt
|
|
interrupt-parent = <&CPM_PIC>;
|
|
reg = <0x9c0 0x40>;
|
|
ranges;
|
|
|
|
muram {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x2000 0x2000>;
|
|
|
|
data@0 {
|
|
compatible = "fsl,cpm-muram-data";
|
|
reg = <0 0x1c00>;
|
|
};
|
|
};
|
|
|
|
brg@9f0 {
|
|
compatible = "fsl,mpc875-brg",
|
|
"fsl,cpm1-brg",
|
|
"fsl,cpm-brg";
|
|
clock-frequency = <50000000>;
|
|
reg = <0x9f0 0x10>;
|
|
};
|
|
|
|
CPM_PIC: interrupt-controller@930 {
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
interrupts = <5 2 0 2>;
|
|
interrupt-parent = <&PIC>;
|
|
reg = <0x930 0x20>;
|
|
compatible = "fsl,mpc875-cpm-pic",
|
|
"fsl,cpm1-pic";
|
|
};
|
|
|
|
console: serial@a80 {
|
|
device_type = "serial";
|
|
compatible = "fsl,mpc875-smc-uart",
|
|
"fsl,cpm1-smc-uart";
|
|
reg = <0xa80 0x10 0x3e80 0x40>;
|
|
interrupts = <4>;
|
|
interrupt-parent = <&CPM_PIC>;
|
|
fsl,cpm-brg = <1>;
|
|
fsl,cpm-command = <0x0090>;
|
|
current-speed = <115200>;
|
|
};
|
|
};
|
|
};
|
|
|
|
chosen {
|
|
linux,stdout-path = &console;
|
|
};
|
|
};
|