linux/arch/arm/boot/dts/kirkwood-cloudbox.dts
Sebastian Hesselbarth a948396981 ARM: dts: kirkwood: rename pin-controller nodes
To prepare pin-controller consolidation, first rename all pinctrl nodes
to a more appropriate name regarding ePAPR recommended names.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1398862602-29595-6-git-send-email-sebastian.hesselbarth@gmail.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-05-05 00:51:33 +00:00

107 lines
1.7 KiB
Plaintext

/dts-v1/;
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
model = "LaCie CloudBox";
compatible = "lacie,cloudbox", "marvell,kirkwood-88f6702", "marvell,kirkwood";
memory {
device_type = "memory";
reg = <0x00000000 0x10000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8";
stdout-path = &uart0;
};
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pmx_cloudbox_sata0: pmx-cloudbox-sata0 {
marvell,pins = "mpp15";
marvell,function = "sata0";
};
};
serial@12000 {
pinctrl-0 = <&pmx_uart0>;
pinctrl-names = "default";
status = "okay";
};
sata@80000 {
pinctrl-0 = <&pmx_cloudbox_sata0>;
pinctrl-names = "default";
status = "okay";
nr-ports = <1>;
};
spi@10600 {
pinctrl-0 = <&pmx_spi>;
pinctrl-names = "default";
status = "okay";
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mx25l4005a";
reg = <0>;
spi-max-frequency = <20000000>;
mode = <0>;
partition@0 {
reg = <0x0 0x80000>;
label = "u-boot";
};
};
};
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
button@1 {
label = "Power push button";
linux,code = <KEY_POWER>;
gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
};
};
gpio-leds {
compatible = "gpio-leds";
red-fail {
label = "cloudbox:red:fail";
gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
};
blue-sata {
label = "cloudbox:blue:sata";
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
};
};
gpio_poweroff {
compatible = "gpio-poweroff";
gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
reg = <0>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};