forked from Minki/linux
f48ad614c1
The TODO list for the hfi1 driver was completed during 4.6. In addition other objections raised (which are far beyond what was in the TODO list) have been addressed as well. It is now time to remove the driver from staging and into the drivers/infiniband sub-tree. Reviewed-by: Jubin John <jubin.john@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
3055 lines
81 KiB
C
3055 lines
81 KiB
C
/*
|
|
* Copyright(c) 2015, 2016 Intel Corporation.
|
|
*
|
|
* This file is provided under a dual BSD/GPLv2 license. When using or
|
|
* redistributing this file, you may do so under either license.
|
|
*
|
|
* GPL LICENSE SUMMARY
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of version 2 of the GNU General Public License as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* BSD LICENSE
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* - Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* - Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* - Neither the name of Intel Corporation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
*/
|
|
|
|
#include <linux/spinlock.h>
|
|
#include <linux/seqlock.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <linux/highmem.h>
|
|
|
|
#include "hfi.h"
|
|
#include "common.h"
|
|
#include "qp.h"
|
|
#include "sdma.h"
|
|
#include "iowait.h"
|
|
#include "trace.h"
|
|
|
|
/* must be a power of 2 >= 64 <= 32768 */
|
|
#define SDMA_DESCQ_CNT 2048
|
|
#define SDMA_DESC_INTR 64
|
|
#define INVALID_TAIL 0xffff
|
|
|
|
static uint sdma_descq_cnt = SDMA_DESCQ_CNT;
|
|
module_param(sdma_descq_cnt, uint, S_IRUGO);
|
|
MODULE_PARM_DESC(sdma_descq_cnt, "Number of SDMA descq entries");
|
|
|
|
static uint sdma_idle_cnt = 250;
|
|
module_param(sdma_idle_cnt, uint, S_IRUGO);
|
|
MODULE_PARM_DESC(sdma_idle_cnt, "sdma interrupt idle delay (ns,default 250)");
|
|
|
|
uint mod_num_sdma;
|
|
module_param_named(num_sdma, mod_num_sdma, uint, S_IRUGO);
|
|
MODULE_PARM_DESC(num_sdma, "Set max number SDMA engines to use");
|
|
|
|
static uint sdma_desct_intr = SDMA_DESC_INTR;
|
|
module_param_named(desct_intr, sdma_desct_intr, uint, S_IRUGO | S_IWUSR);
|
|
MODULE_PARM_DESC(desct_intr, "Number of SDMA descriptor before interrupt");
|
|
|
|
#define SDMA_WAIT_BATCH_SIZE 20
|
|
/* max wait time for a SDMA engine to indicate it has halted */
|
|
#define SDMA_ERR_HALT_TIMEOUT 10 /* ms */
|
|
/* all SDMA engine errors that cause a halt */
|
|
|
|
#define SD(name) SEND_DMA_##name
|
|
#define ALL_SDMA_ENG_HALT_ERRS \
|
|
(SD(ENG_ERR_STATUS_SDMA_WRONG_DW_ERR_SMASK) \
|
|
| SD(ENG_ERR_STATUS_SDMA_GEN_MISMATCH_ERR_SMASK) \
|
|
| SD(ENG_ERR_STATUS_SDMA_TOO_LONG_ERR_SMASK) \
|
|
| SD(ENG_ERR_STATUS_SDMA_TAIL_OUT_OF_BOUNDS_ERR_SMASK) \
|
|
| SD(ENG_ERR_STATUS_SDMA_FIRST_DESC_ERR_SMASK) \
|
|
| SD(ENG_ERR_STATUS_SDMA_MEM_READ_ERR_SMASK) \
|
|
| SD(ENG_ERR_STATUS_SDMA_HALT_ERR_SMASK) \
|
|
| SD(ENG_ERR_STATUS_SDMA_LENGTH_MISMATCH_ERR_SMASK) \
|
|
| SD(ENG_ERR_STATUS_SDMA_PACKET_DESC_OVERFLOW_ERR_SMASK) \
|
|
| SD(ENG_ERR_STATUS_SDMA_HEADER_SELECT_ERR_SMASK) \
|
|
| SD(ENG_ERR_STATUS_SDMA_HEADER_ADDRESS_ERR_SMASK) \
|
|
| SD(ENG_ERR_STATUS_SDMA_HEADER_LENGTH_ERR_SMASK) \
|
|
| SD(ENG_ERR_STATUS_SDMA_TIMEOUT_ERR_SMASK) \
|
|
| SD(ENG_ERR_STATUS_SDMA_DESC_TABLE_UNC_ERR_SMASK) \
|
|
| SD(ENG_ERR_STATUS_SDMA_ASSEMBLY_UNC_ERR_SMASK) \
|
|
| SD(ENG_ERR_STATUS_SDMA_PACKET_TRACKING_UNC_ERR_SMASK) \
|
|
| SD(ENG_ERR_STATUS_SDMA_HEADER_STORAGE_UNC_ERR_SMASK) \
|
|
| SD(ENG_ERR_STATUS_SDMA_HEADER_REQUEST_FIFO_UNC_ERR_SMASK))
|
|
|
|
/* sdma_sendctrl operations */
|
|
#define SDMA_SENDCTRL_OP_ENABLE BIT(0)
|
|
#define SDMA_SENDCTRL_OP_INTENABLE BIT(1)
|
|
#define SDMA_SENDCTRL_OP_HALT BIT(2)
|
|
#define SDMA_SENDCTRL_OP_CLEANUP BIT(3)
|
|
|
|
/* handle long defines */
|
|
#define SDMA_EGRESS_PACKET_OCCUPANCY_SMASK \
|
|
SEND_EGRESS_SEND_DMA_STATUS_SDMA_EGRESS_PACKET_OCCUPANCY_SMASK
|
|
#define SDMA_EGRESS_PACKET_OCCUPANCY_SHIFT \
|
|
SEND_EGRESS_SEND_DMA_STATUS_SDMA_EGRESS_PACKET_OCCUPANCY_SHIFT
|
|
|
|
static const char * const sdma_state_names[] = {
|
|
[sdma_state_s00_hw_down] = "s00_HwDown",
|
|
[sdma_state_s10_hw_start_up_halt_wait] = "s10_HwStartUpHaltWait",
|
|
[sdma_state_s15_hw_start_up_clean_wait] = "s15_HwStartUpCleanWait",
|
|
[sdma_state_s20_idle] = "s20_Idle",
|
|
[sdma_state_s30_sw_clean_up_wait] = "s30_SwCleanUpWait",
|
|
[sdma_state_s40_hw_clean_up_wait] = "s40_HwCleanUpWait",
|
|
[sdma_state_s50_hw_halt_wait] = "s50_HwHaltWait",
|
|
[sdma_state_s60_idle_halt_wait] = "s60_IdleHaltWait",
|
|
[sdma_state_s80_hw_freeze] = "s80_HwFreeze",
|
|
[sdma_state_s82_freeze_sw_clean] = "s82_FreezeSwClean",
|
|
[sdma_state_s99_running] = "s99_Running",
|
|
};
|
|
|
|
#ifdef CONFIG_SDMA_VERBOSITY
|
|
static const char * const sdma_event_names[] = {
|
|
[sdma_event_e00_go_hw_down] = "e00_GoHwDown",
|
|
[sdma_event_e10_go_hw_start] = "e10_GoHwStart",
|
|
[sdma_event_e15_hw_halt_done] = "e15_HwHaltDone",
|
|
[sdma_event_e25_hw_clean_up_done] = "e25_HwCleanUpDone",
|
|
[sdma_event_e30_go_running] = "e30_GoRunning",
|
|
[sdma_event_e40_sw_cleaned] = "e40_SwCleaned",
|
|
[sdma_event_e50_hw_cleaned] = "e50_HwCleaned",
|
|
[sdma_event_e60_hw_halted] = "e60_HwHalted",
|
|
[sdma_event_e70_go_idle] = "e70_GoIdle",
|
|
[sdma_event_e80_hw_freeze] = "e80_HwFreeze",
|
|
[sdma_event_e81_hw_frozen] = "e81_HwFrozen",
|
|
[sdma_event_e82_hw_unfreeze] = "e82_HwUnfreeze",
|
|
[sdma_event_e85_link_down] = "e85_LinkDown",
|
|
[sdma_event_e90_sw_halted] = "e90_SwHalted",
|
|
};
|
|
#endif
|
|
|
|
static const struct sdma_set_state_action sdma_action_table[] = {
|
|
[sdma_state_s00_hw_down] = {
|
|
.go_s99_running_tofalse = 1,
|
|
.op_enable = 0,
|
|
.op_intenable = 0,
|
|
.op_halt = 0,
|
|
.op_cleanup = 0,
|
|
},
|
|
[sdma_state_s10_hw_start_up_halt_wait] = {
|
|
.op_enable = 0,
|
|
.op_intenable = 0,
|
|
.op_halt = 1,
|
|
.op_cleanup = 0,
|
|
},
|
|
[sdma_state_s15_hw_start_up_clean_wait] = {
|
|
.op_enable = 0,
|
|
.op_intenable = 1,
|
|
.op_halt = 0,
|
|
.op_cleanup = 1,
|
|
},
|
|
[sdma_state_s20_idle] = {
|
|
.op_enable = 0,
|
|
.op_intenable = 1,
|
|
.op_halt = 0,
|
|
.op_cleanup = 0,
|
|
},
|
|
[sdma_state_s30_sw_clean_up_wait] = {
|
|
.op_enable = 0,
|
|
.op_intenable = 0,
|
|
.op_halt = 0,
|
|
.op_cleanup = 0,
|
|
},
|
|
[sdma_state_s40_hw_clean_up_wait] = {
|
|
.op_enable = 0,
|
|
.op_intenable = 0,
|
|
.op_halt = 0,
|
|
.op_cleanup = 1,
|
|
},
|
|
[sdma_state_s50_hw_halt_wait] = {
|
|
.op_enable = 0,
|
|
.op_intenable = 0,
|
|
.op_halt = 0,
|
|
.op_cleanup = 0,
|
|
},
|
|
[sdma_state_s60_idle_halt_wait] = {
|
|
.go_s99_running_tofalse = 1,
|
|
.op_enable = 0,
|
|
.op_intenable = 0,
|
|
.op_halt = 1,
|
|
.op_cleanup = 0,
|
|
},
|
|
[sdma_state_s80_hw_freeze] = {
|
|
.op_enable = 0,
|
|
.op_intenable = 0,
|
|
.op_halt = 0,
|
|
.op_cleanup = 0,
|
|
},
|
|
[sdma_state_s82_freeze_sw_clean] = {
|
|
.op_enable = 0,
|
|
.op_intenable = 0,
|
|
.op_halt = 0,
|
|
.op_cleanup = 0,
|
|
},
|
|
[sdma_state_s99_running] = {
|
|
.op_enable = 1,
|
|
.op_intenable = 1,
|
|
.op_halt = 0,
|
|
.op_cleanup = 0,
|
|
.go_s99_running_totrue = 1,
|
|
},
|
|
};
|
|
|
|
#define SDMA_TAIL_UPDATE_THRESH 0x1F
|
|
|
|
/* declare all statics here rather than keep sorting */
|
|
static void sdma_complete(struct kref *);
|
|
static void sdma_finalput(struct sdma_state *);
|
|
static void sdma_get(struct sdma_state *);
|
|
static void sdma_hw_clean_up_task(unsigned long);
|
|
static void sdma_put(struct sdma_state *);
|
|
static void sdma_set_state(struct sdma_engine *, enum sdma_states);
|
|
static void sdma_start_hw_clean_up(struct sdma_engine *);
|
|
static void sdma_sw_clean_up_task(unsigned long);
|
|
static void sdma_sendctrl(struct sdma_engine *, unsigned);
|
|
static void init_sdma_regs(struct sdma_engine *, u32, uint);
|
|
static void sdma_process_event(
|
|
struct sdma_engine *sde,
|
|
enum sdma_events event);
|
|
static void __sdma_process_event(
|
|
struct sdma_engine *sde,
|
|
enum sdma_events event);
|
|
static void dump_sdma_state(struct sdma_engine *sde);
|
|
static void sdma_make_progress(struct sdma_engine *sde, u64 status);
|
|
static void sdma_desc_avail(struct sdma_engine *sde, unsigned avail);
|
|
static void sdma_flush_descq(struct sdma_engine *sde);
|
|
|
|
/**
|
|
* sdma_state_name() - return state string from enum
|
|
* @state: state
|
|
*/
|
|
static const char *sdma_state_name(enum sdma_states state)
|
|
{
|
|
return sdma_state_names[state];
|
|
}
|
|
|
|
static void sdma_get(struct sdma_state *ss)
|
|
{
|
|
kref_get(&ss->kref);
|
|
}
|
|
|
|
static void sdma_complete(struct kref *kref)
|
|
{
|
|
struct sdma_state *ss =
|
|
container_of(kref, struct sdma_state, kref);
|
|
|
|
complete(&ss->comp);
|
|
}
|
|
|
|
static void sdma_put(struct sdma_state *ss)
|
|
{
|
|
kref_put(&ss->kref, sdma_complete);
|
|
}
|
|
|
|
static void sdma_finalput(struct sdma_state *ss)
|
|
{
|
|
sdma_put(ss);
|
|
wait_for_completion(&ss->comp);
|
|
}
|
|
|
|
static inline void write_sde_csr(
|
|
struct sdma_engine *sde,
|
|
u32 offset0,
|
|
u64 value)
|
|
{
|
|
write_kctxt_csr(sde->dd, sde->this_idx, offset0, value);
|
|
}
|
|
|
|
static inline u64 read_sde_csr(
|
|
struct sdma_engine *sde,
|
|
u32 offset0)
|
|
{
|
|
return read_kctxt_csr(sde->dd, sde->this_idx, offset0);
|
|
}
|
|
|
|
/*
|
|
* sdma_wait_for_packet_egress() - wait for the VL FIFO occupancy for
|
|
* sdma engine 'sde' to drop to 0.
|
|
*/
|
|
static void sdma_wait_for_packet_egress(struct sdma_engine *sde,
|
|
int pause)
|
|
{
|
|
u64 off = 8 * sde->this_idx;
|
|
struct hfi1_devdata *dd = sde->dd;
|
|
int lcnt = 0;
|
|
u64 reg_prev;
|
|
u64 reg = 0;
|
|
|
|
while (1) {
|
|
reg_prev = reg;
|
|
reg = read_csr(dd, off + SEND_EGRESS_SEND_DMA_STATUS);
|
|
|
|
reg &= SDMA_EGRESS_PACKET_OCCUPANCY_SMASK;
|
|
reg >>= SDMA_EGRESS_PACKET_OCCUPANCY_SHIFT;
|
|
if (reg == 0)
|
|
break;
|
|
/* counter is reest if accupancy count changes */
|
|
if (reg != reg_prev)
|
|
lcnt = 0;
|
|
if (lcnt++ > 500) {
|
|
/* timed out - bounce the link */
|
|
dd_dev_err(dd, "%s: engine %u timeout waiting for packets to egress, remaining count %u, bouncing link\n",
|
|
__func__, sde->this_idx, (u32)reg);
|
|
queue_work(dd->pport->hfi1_wq,
|
|
&dd->pport->link_bounce_work);
|
|
break;
|
|
}
|
|
udelay(1);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* sdma_wait() - wait for packet egress to complete for all SDMA engines,
|
|
* and pause for credit return.
|
|
*/
|
|
void sdma_wait(struct hfi1_devdata *dd)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < dd->num_sdma; i++) {
|
|
struct sdma_engine *sde = &dd->per_sdma[i];
|
|
|
|
sdma_wait_for_packet_egress(sde, 0);
|
|
}
|
|
}
|
|
|
|
static inline void sdma_set_desc_cnt(struct sdma_engine *sde, unsigned cnt)
|
|
{
|
|
u64 reg;
|
|
|
|
if (!(sde->dd->flags & HFI1_HAS_SDMA_TIMEOUT))
|
|
return;
|
|
reg = cnt;
|
|
reg &= SD(DESC_CNT_CNT_MASK);
|
|
reg <<= SD(DESC_CNT_CNT_SHIFT);
|
|
write_sde_csr(sde, SD(DESC_CNT), reg);
|
|
}
|
|
|
|
static inline void complete_tx(struct sdma_engine *sde,
|
|
struct sdma_txreq *tx,
|
|
int res)
|
|
{
|
|
/* protect against complete modifying */
|
|
struct iowait *wait = tx->wait;
|
|
callback_t complete = tx->complete;
|
|
|
|
#ifdef CONFIG_HFI1_DEBUG_SDMA_ORDER
|
|
trace_hfi1_sdma_out_sn(sde, tx->sn);
|
|
if (WARN_ON_ONCE(sde->head_sn != tx->sn))
|
|
dd_dev_err(sde->dd, "expected %llu got %llu\n",
|
|
sde->head_sn, tx->sn);
|
|
sde->head_sn++;
|
|
#endif
|
|
sdma_txclean(sde->dd, tx);
|
|
if (complete)
|
|
(*complete)(tx, res);
|
|
if (wait && iowait_sdma_dec(wait))
|
|
iowait_drain_wakeup(wait);
|
|
}
|
|
|
|
/*
|
|
* Complete all the sdma requests with a SDMA_TXREQ_S_ABORTED status
|
|
*
|
|
* Depending on timing there can be txreqs in two places:
|
|
* - in the descq ring
|
|
* - in the flush list
|
|
*
|
|
* To avoid ordering issues the descq ring needs to be flushed
|
|
* first followed by the flush list.
|
|
*
|
|
* This routine is called from two places
|
|
* - From a work queue item
|
|
* - Directly from the state machine just before setting the
|
|
* state to running
|
|
*
|
|
* Must be called with head_lock held
|
|
*
|
|
*/
|
|
static void sdma_flush(struct sdma_engine *sde)
|
|
{
|
|
struct sdma_txreq *txp, *txp_next;
|
|
LIST_HEAD(flushlist);
|
|
unsigned long flags;
|
|
|
|
/* flush from head to tail */
|
|
sdma_flush_descq(sde);
|
|
spin_lock_irqsave(&sde->flushlist_lock, flags);
|
|
/* copy flush list */
|
|
list_for_each_entry_safe(txp, txp_next, &sde->flushlist, list) {
|
|
list_del_init(&txp->list);
|
|
list_add_tail(&txp->list, &flushlist);
|
|
}
|
|
spin_unlock_irqrestore(&sde->flushlist_lock, flags);
|
|
/* flush from flush list */
|
|
list_for_each_entry_safe(txp, txp_next, &flushlist, list)
|
|
complete_tx(sde, txp, SDMA_TXREQ_S_ABORTED);
|
|
}
|
|
|
|
/*
|
|
* Fields a work request for flushing the descq ring
|
|
* and the flush list
|
|
*
|
|
* If the engine has been brought to running during
|
|
* the scheduling delay, the flush is ignored, assuming
|
|
* that the process of bringing the engine to running
|
|
* would have done this flush prior to going to running.
|
|
*
|
|
*/
|
|
static void sdma_field_flush(struct work_struct *work)
|
|
{
|
|
unsigned long flags;
|
|
struct sdma_engine *sde =
|
|
container_of(work, struct sdma_engine, flush_worker);
|
|
|
|
write_seqlock_irqsave(&sde->head_lock, flags);
|
|
if (!__sdma_running(sde))
|
|
sdma_flush(sde);
|
|
write_sequnlock_irqrestore(&sde->head_lock, flags);
|
|
}
|
|
|
|
static void sdma_err_halt_wait(struct work_struct *work)
|
|
{
|
|
struct sdma_engine *sde = container_of(work, struct sdma_engine,
|
|
err_halt_worker);
|
|
u64 statuscsr;
|
|
unsigned long timeout;
|
|
|
|
timeout = jiffies + msecs_to_jiffies(SDMA_ERR_HALT_TIMEOUT);
|
|
while (1) {
|
|
statuscsr = read_sde_csr(sde, SD(STATUS));
|
|
statuscsr &= SD(STATUS_ENG_HALTED_SMASK);
|
|
if (statuscsr)
|
|
break;
|
|
if (time_after(jiffies, timeout)) {
|
|
dd_dev_err(sde->dd,
|
|
"SDMA engine %d - timeout waiting for engine to halt\n",
|
|
sde->this_idx);
|
|
/*
|
|
* Continue anyway. This could happen if there was
|
|
* an uncorrectable error in the wrong spot.
|
|
*/
|
|
break;
|
|
}
|
|
usleep_range(80, 120);
|
|
}
|
|
|
|
sdma_process_event(sde, sdma_event_e15_hw_halt_done);
|
|
}
|
|
|
|
static void sdma_err_progress_check_schedule(struct sdma_engine *sde)
|
|
{
|
|
if (!is_bx(sde->dd) && HFI1_CAP_IS_KSET(SDMA_AHG)) {
|
|
unsigned index;
|
|
struct hfi1_devdata *dd = sde->dd;
|
|
|
|
for (index = 0; index < dd->num_sdma; index++) {
|
|
struct sdma_engine *curr_sdma = &dd->per_sdma[index];
|
|
|
|
if (curr_sdma != sde)
|
|
curr_sdma->progress_check_head =
|
|
curr_sdma->descq_head;
|
|
}
|
|
dd_dev_err(sde->dd,
|
|
"SDMA engine %d - check scheduled\n",
|
|
sde->this_idx);
|
|
mod_timer(&sde->err_progress_check_timer, jiffies + 10);
|
|
}
|
|
}
|
|
|
|
static void sdma_err_progress_check(unsigned long data)
|
|
{
|
|
unsigned index;
|
|
struct sdma_engine *sde = (struct sdma_engine *)data;
|
|
|
|
dd_dev_err(sde->dd, "SDE progress check event\n");
|
|
for (index = 0; index < sde->dd->num_sdma; index++) {
|
|
struct sdma_engine *curr_sde = &sde->dd->per_sdma[index];
|
|
unsigned long flags;
|
|
|
|
/* check progress on each engine except the current one */
|
|
if (curr_sde == sde)
|
|
continue;
|
|
/*
|
|
* We must lock interrupts when acquiring sde->lock,
|
|
* to avoid a deadlock if interrupt triggers and spins on
|
|
* the same lock on same CPU
|
|
*/
|
|
spin_lock_irqsave(&curr_sde->tail_lock, flags);
|
|
write_seqlock(&curr_sde->head_lock);
|
|
|
|
/* skip non-running queues */
|
|
if (curr_sde->state.current_state != sdma_state_s99_running) {
|
|
write_sequnlock(&curr_sde->head_lock);
|
|
spin_unlock_irqrestore(&curr_sde->tail_lock, flags);
|
|
continue;
|
|
}
|
|
|
|
if ((curr_sde->descq_head != curr_sde->descq_tail) &&
|
|
(curr_sde->descq_head ==
|
|
curr_sde->progress_check_head))
|
|
__sdma_process_event(curr_sde,
|
|
sdma_event_e90_sw_halted);
|
|
write_sequnlock(&curr_sde->head_lock);
|
|
spin_unlock_irqrestore(&curr_sde->tail_lock, flags);
|
|
}
|
|
schedule_work(&sde->err_halt_worker);
|
|
}
|
|
|
|
static void sdma_hw_clean_up_task(unsigned long opaque)
|
|
{
|
|
struct sdma_engine *sde = (struct sdma_engine *)opaque;
|
|
u64 statuscsr;
|
|
|
|
while (1) {
|
|
#ifdef CONFIG_SDMA_VERBOSITY
|
|
dd_dev_err(sde->dd, "CONFIG SDMA(%u) %s:%d %s()\n",
|
|
sde->this_idx, slashstrip(__FILE__), __LINE__,
|
|
__func__);
|
|
#endif
|
|
statuscsr = read_sde_csr(sde, SD(STATUS));
|
|
statuscsr &= SD(STATUS_ENG_CLEANED_UP_SMASK);
|
|
if (statuscsr)
|
|
break;
|
|
udelay(10);
|
|
}
|
|
|
|
sdma_process_event(sde, sdma_event_e25_hw_clean_up_done);
|
|
}
|
|
|
|
static inline struct sdma_txreq *get_txhead(struct sdma_engine *sde)
|
|
{
|
|
smp_read_barrier_depends(); /* see sdma_update_tail() */
|
|
return sde->tx_ring[sde->tx_head & sde->sdma_mask];
|
|
}
|
|
|
|
/*
|
|
* flush ring for recovery
|
|
*/
|
|
static void sdma_flush_descq(struct sdma_engine *sde)
|
|
{
|
|
u16 head, tail;
|
|
int progress = 0;
|
|
struct sdma_txreq *txp = get_txhead(sde);
|
|
|
|
/* The reason for some of the complexity of this code is that
|
|
* not all descriptors have corresponding txps. So, we have to
|
|
* be able to skip over descs until we wander into the range of
|
|
* the next txp on the list.
|
|
*/
|
|
head = sde->descq_head & sde->sdma_mask;
|
|
tail = sde->descq_tail & sde->sdma_mask;
|
|
while (head != tail) {
|
|
/* advance head, wrap if needed */
|
|
head = ++sde->descq_head & sde->sdma_mask;
|
|
/* if now past this txp's descs, do the callback */
|
|
if (txp && txp->next_descq_idx == head) {
|
|
/* remove from list */
|
|
sde->tx_ring[sde->tx_head++ & sde->sdma_mask] = NULL;
|
|
complete_tx(sde, txp, SDMA_TXREQ_S_ABORTED);
|
|
trace_hfi1_sdma_progress(sde, head, tail, txp);
|
|
txp = get_txhead(sde);
|
|
}
|
|
progress++;
|
|
}
|
|
if (progress)
|
|
sdma_desc_avail(sde, sdma_descq_freecnt(sde));
|
|
}
|
|
|
|
static void sdma_sw_clean_up_task(unsigned long opaque)
|
|
{
|
|
struct sdma_engine *sde = (struct sdma_engine *)opaque;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&sde->tail_lock, flags);
|
|
write_seqlock(&sde->head_lock);
|
|
|
|
/*
|
|
* At this point, the following should always be true:
|
|
* - We are halted, so no more descriptors are getting retired.
|
|
* - We are not running, so no one is submitting new work.
|
|
* - Only we can send the e40_sw_cleaned, so we can't start
|
|
* running again until we say so. So, the active list and
|
|
* descq are ours to play with.
|
|
*/
|
|
|
|
/*
|
|
* In the error clean up sequence, software clean must be called
|
|
* before the hardware clean so we can use the hardware head in
|
|
* the progress routine. A hardware clean or SPC unfreeze will
|
|
* reset the hardware head.
|
|
*
|
|
* Process all retired requests. The progress routine will use the
|
|
* latest physical hardware head - we are not running so speed does
|
|
* not matter.
|
|
*/
|
|
sdma_make_progress(sde, 0);
|
|
|
|
sdma_flush(sde);
|
|
|
|
/*
|
|
* Reset our notion of head and tail.
|
|
* Note that the HW registers have been reset via an earlier
|
|
* clean up.
|
|
*/
|
|
sde->descq_tail = 0;
|
|
sde->descq_head = 0;
|
|
sde->desc_avail = sdma_descq_freecnt(sde);
|
|
*sde->head_dma = 0;
|
|
|
|
__sdma_process_event(sde, sdma_event_e40_sw_cleaned);
|
|
|
|
write_sequnlock(&sde->head_lock);
|
|
spin_unlock_irqrestore(&sde->tail_lock, flags);
|
|
}
|
|
|
|
static void sdma_sw_tear_down(struct sdma_engine *sde)
|
|
{
|
|
struct sdma_state *ss = &sde->state;
|
|
|
|
/* Releasing this reference means the state machine has stopped. */
|
|
sdma_put(ss);
|
|
|
|
/* stop waiting for all unfreeze events to complete */
|
|
atomic_set(&sde->dd->sdma_unfreeze_count, -1);
|
|
wake_up_interruptible(&sde->dd->sdma_unfreeze_wq);
|
|
}
|
|
|
|
static void sdma_start_hw_clean_up(struct sdma_engine *sde)
|
|
{
|
|
tasklet_hi_schedule(&sde->sdma_hw_clean_up_task);
|
|
}
|
|
|
|
static void sdma_set_state(struct sdma_engine *sde,
|
|
enum sdma_states next_state)
|
|
{
|
|
struct sdma_state *ss = &sde->state;
|
|
const struct sdma_set_state_action *action = sdma_action_table;
|
|
unsigned op = 0;
|
|
|
|
trace_hfi1_sdma_state(
|
|
sde,
|
|
sdma_state_names[ss->current_state],
|
|
sdma_state_names[next_state]);
|
|
|
|
/* debugging bookkeeping */
|
|
ss->previous_state = ss->current_state;
|
|
ss->previous_op = ss->current_op;
|
|
ss->current_state = next_state;
|
|
|
|
if (ss->previous_state != sdma_state_s99_running &&
|
|
next_state == sdma_state_s99_running)
|
|
sdma_flush(sde);
|
|
|
|
if (action[next_state].op_enable)
|
|
op |= SDMA_SENDCTRL_OP_ENABLE;
|
|
|
|
if (action[next_state].op_intenable)
|
|
op |= SDMA_SENDCTRL_OP_INTENABLE;
|
|
|
|
if (action[next_state].op_halt)
|
|
op |= SDMA_SENDCTRL_OP_HALT;
|
|
|
|
if (action[next_state].op_cleanup)
|
|
op |= SDMA_SENDCTRL_OP_CLEANUP;
|
|
|
|
if (action[next_state].go_s99_running_tofalse)
|
|
ss->go_s99_running = 0;
|
|
|
|
if (action[next_state].go_s99_running_totrue)
|
|
ss->go_s99_running = 1;
|
|
|
|
ss->current_op = op;
|
|
sdma_sendctrl(sde, ss->current_op);
|
|
}
|
|
|
|
/**
|
|
* sdma_get_descq_cnt() - called when device probed
|
|
*
|
|
* Return a validated descq count.
|
|
*
|
|
* This is currently only used in the verbs initialization to build the tx
|
|
* list.
|
|
*
|
|
* This will probably be deleted in favor of a more scalable approach to
|
|
* alloc tx's.
|
|
*
|
|
*/
|
|
u16 sdma_get_descq_cnt(void)
|
|
{
|
|
u16 count = sdma_descq_cnt;
|
|
|
|
if (!count)
|
|
return SDMA_DESCQ_CNT;
|
|
/* count must be a power of 2 greater than 64 and less than
|
|
* 32768. Otherwise return default.
|
|
*/
|
|
if (!is_power_of_2(count))
|
|
return SDMA_DESCQ_CNT;
|
|
if (count < 64 || count > 32768)
|
|
return SDMA_DESCQ_CNT;
|
|
return count;
|
|
}
|
|
|
|
/**
|
|
* sdma_select_engine_vl() - select sdma engine
|
|
* @dd: devdata
|
|
* @selector: a spreading factor
|
|
* @vl: this vl
|
|
*
|
|
*
|
|
* This function returns an engine based on the selector and a vl. The
|
|
* mapping fields are protected by RCU.
|
|
*/
|
|
struct sdma_engine *sdma_select_engine_vl(
|
|
struct hfi1_devdata *dd,
|
|
u32 selector,
|
|
u8 vl)
|
|
{
|
|
struct sdma_vl_map *m;
|
|
struct sdma_map_elem *e;
|
|
struct sdma_engine *rval;
|
|
|
|
/* NOTE This should only happen if SC->VL changed after the initial
|
|
* checks on the QP/AH
|
|
* Default will return engine 0 below
|
|
*/
|
|
if (vl >= num_vls) {
|
|
rval = NULL;
|
|
goto done;
|
|
}
|
|
|
|
rcu_read_lock();
|
|
m = rcu_dereference(dd->sdma_map);
|
|
if (unlikely(!m)) {
|
|
rcu_read_unlock();
|
|
return &dd->per_sdma[0];
|
|
}
|
|
e = m->map[vl & m->mask];
|
|
rval = e->sde[selector & e->mask];
|
|
rcu_read_unlock();
|
|
|
|
done:
|
|
rval = !rval ? &dd->per_sdma[0] : rval;
|
|
trace_hfi1_sdma_engine_select(dd, selector, vl, rval->this_idx);
|
|
return rval;
|
|
}
|
|
|
|
/**
|
|
* sdma_select_engine_sc() - select sdma engine
|
|
* @dd: devdata
|
|
* @selector: a spreading factor
|
|
* @sc5: the 5 bit sc
|
|
*
|
|
*
|
|
* This function returns an engine based on the selector and an sc.
|
|
*/
|
|
struct sdma_engine *sdma_select_engine_sc(
|
|
struct hfi1_devdata *dd,
|
|
u32 selector,
|
|
u8 sc5)
|
|
{
|
|
u8 vl = sc_to_vlt(dd, sc5);
|
|
|
|
return sdma_select_engine_vl(dd, selector, vl);
|
|
}
|
|
|
|
/*
|
|
* Free the indicated map struct
|
|
*/
|
|
static void sdma_map_free(struct sdma_vl_map *m)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; m && i < m->actual_vls; i++)
|
|
kfree(m->map[i]);
|
|
kfree(m);
|
|
}
|
|
|
|
/*
|
|
* Handle RCU callback
|
|
*/
|
|
static void sdma_map_rcu_callback(struct rcu_head *list)
|
|
{
|
|
struct sdma_vl_map *m = container_of(list, struct sdma_vl_map, list);
|
|
|
|
sdma_map_free(m);
|
|
}
|
|
|
|
/**
|
|
* sdma_map_init - called when # vls change
|
|
* @dd: hfi1_devdata
|
|
* @port: port number
|
|
* @num_vls: number of vls
|
|
* @vl_engines: per vl engine mapping (optional)
|
|
*
|
|
* This routine changes the mapping based on the number of vls.
|
|
*
|
|
* vl_engines is used to specify a non-uniform vl/engine loading. NULL
|
|
* implies auto computing the loading and giving each VLs a uniform
|
|
* distribution of engines per VL.
|
|
*
|
|
* The auto algorithm computes the sde_per_vl and the number of extra
|
|
* engines. Any extra engines are added from the last VL on down.
|
|
*
|
|
* rcu locking is used here to control access to the mapping fields.
|
|
*
|
|
* If either the num_vls or num_sdma are non-power of 2, the array sizes
|
|
* in the struct sdma_vl_map and the struct sdma_map_elem are rounded
|
|
* up to the next highest power of 2 and the first entry is reused
|
|
* in a round robin fashion.
|
|
*
|
|
* If an error occurs the map change is not done and the mapping is
|
|
* not changed.
|
|
*
|
|
*/
|
|
int sdma_map_init(struct hfi1_devdata *dd, u8 port, u8 num_vls, u8 *vl_engines)
|
|
{
|
|
int i, j;
|
|
int extra, sde_per_vl;
|
|
int engine = 0;
|
|
u8 lvl_engines[OPA_MAX_VLS];
|
|
struct sdma_vl_map *oldmap, *newmap;
|
|
|
|
if (!(dd->flags & HFI1_HAS_SEND_DMA))
|
|
return 0;
|
|
|
|
if (!vl_engines) {
|
|
/* truncate divide */
|
|
sde_per_vl = dd->num_sdma / num_vls;
|
|
/* extras */
|
|
extra = dd->num_sdma % num_vls;
|
|
vl_engines = lvl_engines;
|
|
/* add extras from last vl down */
|
|
for (i = num_vls - 1; i >= 0; i--, extra--)
|
|
vl_engines[i] = sde_per_vl + (extra > 0 ? 1 : 0);
|
|
}
|
|
/* build new map */
|
|
newmap = kzalloc(
|
|
sizeof(struct sdma_vl_map) +
|
|
roundup_pow_of_two(num_vls) *
|
|
sizeof(struct sdma_map_elem *),
|
|
GFP_KERNEL);
|
|
if (!newmap)
|
|
goto bail;
|
|
newmap->actual_vls = num_vls;
|
|
newmap->vls = roundup_pow_of_two(num_vls);
|
|
newmap->mask = (1 << ilog2(newmap->vls)) - 1;
|
|
/* initialize back-map */
|
|
for (i = 0; i < TXE_NUM_SDMA_ENGINES; i++)
|
|
newmap->engine_to_vl[i] = -1;
|
|
for (i = 0; i < newmap->vls; i++) {
|
|
/* save for wrap around */
|
|
int first_engine = engine;
|
|
|
|
if (i < newmap->actual_vls) {
|
|
int sz = roundup_pow_of_two(vl_engines[i]);
|
|
|
|
/* only allocate once */
|
|
newmap->map[i] = kzalloc(
|
|
sizeof(struct sdma_map_elem) +
|
|
sz * sizeof(struct sdma_engine *),
|
|
GFP_KERNEL);
|
|
if (!newmap->map[i])
|
|
goto bail;
|
|
newmap->map[i]->mask = (1 << ilog2(sz)) - 1;
|
|
/* assign engines */
|
|
for (j = 0; j < sz; j++) {
|
|
newmap->map[i]->sde[j] =
|
|
&dd->per_sdma[engine];
|
|
if (++engine >= first_engine + vl_engines[i])
|
|
/* wrap back to first engine */
|
|
engine = first_engine;
|
|
}
|
|
/* assign back-map */
|
|
for (j = 0; j < vl_engines[i]; j++)
|
|
newmap->engine_to_vl[first_engine + j] = i;
|
|
} else {
|
|
/* just re-use entry without allocating */
|
|
newmap->map[i] = newmap->map[i % num_vls];
|
|
}
|
|
engine = first_engine + vl_engines[i];
|
|
}
|
|
/* newmap in hand, save old map */
|
|
spin_lock_irq(&dd->sde_map_lock);
|
|
oldmap = rcu_dereference_protected(dd->sdma_map,
|
|
lockdep_is_held(&dd->sde_map_lock));
|
|
|
|
/* publish newmap */
|
|
rcu_assign_pointer(dd->sdma_map, newmap);
|
|
|
|
spin_unlock_irq(&dd->sde_map_lock);
|
|
/* success, free any old map after grace period */
|
|
if (oldmap)
|
|
call_rcu(&oldmap->list, sdma_map_rcu_callback);
|
|
return 0;
|
|
bail:
|
|
/* free any partial allocation */
|
|
sdma_map_free(newmap);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/*
|
|
* Clean up allocated memory.
|
|
*
|
|
* This routine is can be called regardless of the success of sdma_init()
|
|
*
|
|
*/
|
|
static void sdma_clean(struct hfi1_devdata *dd, size_t num_engines)
|
|
{
|
|
size_t i;
|
|
struct sdma_engine *sde;
|
|
|
|
if (dd->sdma_pad_dma) {
|
|
dma_free_coherent(&dd->pcidev->dev, 4,
|
|
(void *)dd->sdma_pad_dma,
|
|
dd->sdma_pad_phys);
|
|
dd->sdma_pad_dma = NULL;
|
|
dd->sdma_pad_phys = 0;
|
|
}
|
|
if (dd->sdma_heads_dma) {
|
|
dma_free_coherent(&dd->pcidev->dev, dd->sdma_heads_size,
|
|
(void *)dd->sdma_heads_dma,
|
|
dd->sdma_heads_phys);
|
|
dd->sdma_heads_dma = NULL;
|
|
dd->sdma_heads_phys = 0;
|
|
}
|
|
for (i = 0; dd->per_sdma && i < num_engines; ++i) {
|
|
sde = &dd->per_sdma[i];
|
|
|
|
sde->head_dma = NULL;
|
|
sde->head_phys = 0;
|
|
|
|
if (sde->descq) {
|
|
dma_free_coherent(
|
|
&dd->pcidev->dev,
|
|
sde->descq_cnt * sizeof(u64[2]),
|
|
sde->descq,
|
|
sde->descq_phys
|
|
);
|
|
sde->descq = NULL;
|
|
sde->descq_phys = 0;
|
|
}
|
|
kvfree(sde->tx_ring);
|
|
sde->tx_ring = NULL;
|
|
}
|
|
spin_lock_irq(&dd->sde_map_lock);
|
|
sdma_map_free(rcu_access_pointer(dd->sdma_map));
|
|
RCU_INIT_POINTER(dd->sdma_map, NULL);
|
|
spin_unlock_irq(&dd->sde_map_lock);
|
|
synchronize_rcu();
|
|
kfree(dd->per_sdma);
|
|
dd->per_sdma = NULL;
|
|
}
|
|
|
|
/**
|
|
* sdma_init() - called when device probed
|
|
* @dd: hfi1_devdata
|
|
* @port: port number (currently only zero)
|
|
*
|
|
* sdma_init initializes the specified number of engines.
|
|
*
|
|
* The code initializes each sde, its csrs. Interrupts
|
|
* are not required to be enabled.
|
|
*
|
|
* Returns:
|
|
* 0 - success, -errno on failure
|
|
*/
|
|
int sdma_init(struct hfi1_devdata *dd, u8 port)
|
|
{
|
|
unsigned this_idx;
|
|
struct sdma_engine *sde;
|
|
u16 descq_cnt;
|
|
void *curr_head;
|
|
struct hfi1_pportdata *ppd = dd->pport + port;
|
|
u32 per_sdma_credits;
|
|
uint idle_cnt = sdma_idle_cnt;
|
|
size_t num_engines = dd->chip_sdma_engines;
|
|
|
|
if (!HFI1_CAP_IS_KSET(SDMA)) {
|
|
HFI1_CAP_CLEAR(SDMA_AHG);
|
|
return 0;
|
|
}
|
|
if (mod_num_sdma &&
|
|
/* can't exceed chip support */
|
|
mod_num_sdma <= dd->chip_sdma_engines &&
|
|
/* count must be >= vls */
|
|
mod_num_sdma >= num_vls)
|
|
num_engines = mod_num_sdma;
|
|
|
|
dd_dev_info(dd, "SDMA mod_num_sdma: %u\n", mod_num_sdma);
|
|
dd_dev_info(dd, "SDMA chip_sdma_engines: %u\n", dd->chip_sdma_engines);
|
|
dd_dev_info(dd, "SDMA chip_sdma_mem_size: %u\n",
|
|
dd->chip_sdma_mem_size);
|
|
|
|
per_sdma_credits =
|
|
dd->chip_sdma_mem_size / (num_engines * SDMA_BLOCK_SIZE);
|
|
|
|
/* set up freeze waitqueue */
|
|
init_waitqueue_head(&dd->sdma_unfreeze_wq);
|
|
atomic_set(&dd->sdma_unfreeze_count, 0);
|
|
|
|
descq_cnt = sdma_get_descq_cnt();
|
|
dd_dev_info(dd, "SDMA engines %zu descq_cnt %u\n",
|
|
num_engines, descq_cnt);
|
|
|
|
/* alloc memory for array of send engines */
|
|
dd->per_sdma = kcalloc(num_engines, sizeof(*dd->per_sdma), GFP_KERNEL);
|
|
if (!dd->per_sdma)
|
|
return -ENOMEM;
|
|
|
|
idle_cnt = ns_to_cclock(dd, idle_cnt);
|
|
if (!sdma_desct_intr)
|
|
sdma_desct_intr = SDMA_DESC_INTR;
|
|
|
|
/* Allocate memory for SendDMA descriptor FIFOs */
|
|
for (this_idx = 0; this_idx < num_engines; ++this_idx) {
|
|
sde = &dd->per_sdma[this_idx];
|
|
sde->dd = dd;
|
|
sde->ppd = ppd;
|
|
sde->this_idx = this_idx;
|
|
sde->descq_cnt = descq_cnt;
|
|
sde->desc_avail = sdma_descq_freecnt(sde);
|
|
sde->sdma_shift = ilog2(descq_cnt);
|
|
sde->sdma_mask = (1 << sde->sdma_shift) - 1;
|
|
|
|
/* Create a mask specifically for each interrupt source */
|
|
sde->int_mask = (u64)1 << (0 * TXE_NUM_SDMA_ENGINES +
|
|
this_idx);
|
|
sde->progress_mask = (u64)1 << (1 * TXE_NUM_SDMA_ENGINES +
|
|
this_idx);
|
|
sde->idle_mask = (u64)1 << (2 * TXE_NUM_SDMA_ENGINES +
|
|
this_idx);
|
|
/* Create a combined mask to cover all 3 interrupt sources */
|
|
sde->imask = sde->int_mask | sde->progress_mask |
|
|
sde->idle_mask;
|
|
|
|
spin_lock_init(&sde->tail_lock);
|
|
seqlock_init(&sde->head_lock);
|
|
spin_lock_init(&sde->senddmactrl_lock);
|
|
spin_lock_init(&sde->flushlist_lock);
|
|
/* insure there is always a zero bit */
|
|
sde->ahg_bits = 0xfffffffe00000000ULL;
|
|
|
|
sdma_set_state(sde, sdma_state_s00_hw_down);
|
|
|
|
/* set up reference counting */
|
|
kref_init(&sde->state.kref);
|
|
init_completion(&sde->state.comp);
|
|
|
|
INIT_LIST_HEAD(&sde->flushlist);
|
|
INIT_LIST_HEAD(&sde->dmawait);
|
|
|
|
sde->tail_csr =
|
|
get_kctxt_csr_addr(dd, this_idx, SD(TAIL));
|
|
|
|
if (idle_cnt)
|
|
dd->default_desc1 =
|
|
SDMA_DESC1_HEAD_TO_HOST_FLAG;
|
|
else
|
|
dd->default_desc1 =
|
|
SDMA_DESC1_INT_REQ_FLAG;
|
|
|
|
tasklet_init(&sde->sdma_hw_clean_up_task, sdma_hw_clean_up_task,
|
|
(unsigned long)sde);
|
|
|
|
tasklet_init(&sde->sdma_sw_clean_up_task, sdma_sw_clean_up_task,
|
|
(unsigned long)sde);
|
|
INIT_WORK(&sde->err_halt_worker, sdma_err_halt_wait);
|
|
INIT_WORK(&sde->flush_worker, sdma_field_flush);
|
|
|
|
sde->progress_check_head = 0;
|
|
|
|
setup_timer(&sde->err_progress_check_timer,
|
|
sdma_err_progress_check, (unsigned long)sde);
|
|
|
|
sde->descq = dma_zalloc_coherent(
|
|
&dd->pcidev->dev,
|
|
descq_cnt * sizeof(u64[2]),
|
|
&sde->descq_phys,
|
|
GFP_KERNEL
|
|
);
|
|
if (!sde->descq)
|
|
goto bail;
|
|
sde->tx_ring =
|
|
kcalloc(descq_cnt, sizeof(struct sdma_txreq *),
|
|
GFP_KERNEL);
|
|
if (!sde->tx_ring)
|
|
sde->tx_ring =
|
|
vzalloc(
|
|
sizeof(struct sdma_txreq *) *
|
|
descq_cnt);
|
|
if (!sde->tx_ring)
|
|
goto bail;
|
|
}
|
|
|
|
dd->sdma_heads_size = L1_CACHE_BYTES * num_engines;
|
|
/* Allocate memory for DMA of head registers to memory */
|
|
dd->sdma_heads_dma = dma_zalloc_coherent(
|
|
&dd->pcidev->dev,
|
|
dd->sdma_heads_size,
|
|
&dd->sdma_heads_phys,
|
|
GFP_KERNEL
|
|
);
|
|
if (!dd->sdma_heads_dma) {
|
|
dd_dev_err(dd, "failed to allocate SendDMA head memory\n");
|
|
goto bail;
|
|
}
|
|
|
|
/* Allocate memory for pad */
|
|
dd->sdma_pad_dma = dma_zalloc_coherent(
|
|
&dd->pcidev->dev,
|
|
sizeof(u32),
|
|
&dd->sdma_pad_phys,
|
|
GFP_KERNEL
|
|
);
|
|
if (!dd->sdma_pad_dma) {
|
|
dd_dev_err(dd, "failed to allocate SendDMA pad memory\n");
|
|
goto bail;
|
|
}
|
|
|
|
/* assign each engine to different cacheline and init registers */
|
|
curr_head = (void *)dd->sdma_heads_dma;
|
|
for (this_idx = 0; this_idx < num_engines; ++this_idx) {
|
|
unsigned long phys_offset;
|
|
|
|
sde = &dd->per_sdma[this_idx];
|
|
|
|
sde->head_dma = curr_head;
|
|
curr_head += L1_CACHE_BYTES;
|
|
phys_offset = (unsigned long)sde->head_dma -
|
|
(unsigned long)dd->sdma_heads_dma;
|
|
sde->head_phys = dd->sdma_heads_phys + phys_offset;
|
|
init_sdma_regs(sde, per_sdma_credits, idle_cnt);
|
|
}
|
|
dd->flags |= HFI1_HAS_SEND_DMA;
|
|
dd->flags |= idle_cnt ? HFI1_HAS_SDMA_TIMEOUT : 0;
|
|
dd->num_sdma = num_engines;
|
|
if (sdma_map_init(dd, port, ppd->vls_operational, NULL))
|
|
goto bail;
|
|
dd_dev_info(dd, "SDMA num_sdma: %u\n", dd->num_sdma);
|
|
return 0;
|
|
|
|
bail:
|
|
sdma_clean(dd, num_engines);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/**
|
|
* sdma_all_running() - called when the link goes up
|
|
* @dd: hfi1_devdata
|
|
*
|
|
* This routine moves all engines to the running state.
|
|
*/
|
|
void sdma_all_running(struct hfi1_devdata *dd)
|
|
{
|
|
struct sdma_engine *sde;
|
|
unsigned int i;
|
|
|
|
/* move all engines to running */
|
|
for (i = 0; i < dd->num_sdma; ++i) {
|
|
sde = &dd->per_sdma[i];
|
|
sdma_process_event(sde, sdma_event_e30_go_running);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* sdma_all_idle() - called when the link goes down
|
|
* @dd: hfi1_devdata
|
|
*
|
|
* This routine moves all engines to the idle state.
|
|
*/
|
|
void sdma_all_idle(struct hfi1_devdata *dd)
|
|
{
|
|
struct sdma_engine *sde;
|
|
unsigned int i;
|
|
|
|
/* idle all engines */
|
|
for (i = 0; i < dd->num_sdma; ++i) {
|
|
sde = &dd->per_sdma[i];
|
|
sdma_process_event(sde, sdma_event_e70_go_idle);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* sdma_start() - called to kick off state processing for all engines
|
|
* @dd: hfi1_devdata
|
|
*
|
|
* This routine is for kicking off the state processing for all required
|
|
* sdma engines. Interrupts need to be working at this point.
|
|
*
|
|
*/
|
|
void sdma_start(struct hfi1_devdata *dd)
|
|
{
|
|
unsigned i;
|
|
struct sdma_engine *sde;
|
|
|
|
/* kick off the engines state processing */
|
|
for (i = 0; i < dd->num_sdma; ++i) {
|
|
sde = &dd->per_sdma[i];
|
|
sdma_process_event(sde, sdma_event_e10_go_hw_start);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* sdma_exit() - used when module is removed
|
|
* @dd: hfi1_devdata
|
|
*/
|
|
void sdma_exit(struct hfi1_devdata *dd)
|
|
{
|
|
unsigned this_idx;
|
|
struct sdma_engine *sde;
|
|
|
|
for (this_idx = 0; dd->per_sdma && this_idx < dd->num_sdma;
|
|
++this_idx) {
|
|
sde = &dd->per_sdma[this_idx];
|
|
if (!list_empty(&sde->dmawait))
|
|
dd_dev_err(dd, "sde %u: dmawait list not empty!\n",
|
|
sde->this_idx);
|
|
sdma_process_event(sde, sdma_event_e00_go_hw_down);
|
|
|
|
del_timer_sync(&sde->err_progress_check_timer);
|
|
|
|
/*
|
|
* This waits for the state machine to exit so it is not
|
|
* necessary to kill the sdma_sw_clean_up_task to make sure
|
|
* it is not running.
|
|
*/
|
|
sdma_finalput(&sde->state);
|
|
}
|
|
sdma_clean(dd, dd->num_sdma);
|
|
}
|
|
|
|
/*
|
|
* unmap the indicated descriptor
|
|
*/
|
|
static inline void sdma_unmap_desc(
|
|
struct hfi1_devdata *dd,
|
|
struct sdma_desc *descp)
|
|
{
|
|
switch (sdma_mapping_type(descp)) {
|
|
case SDMA_MAP_SINGLE:
|
|
dma_unmap_single(
|
|
&dd->pcidev->dev,
|
|
sdma_mapping_addr(descp),
|
|
sdma_mapping_len(descp),
|
|
DMA_TO_DEVICE);
|
|
break;
|
|
case SDMA_MAP_PAGE:
|
|
dma_unmap_page(
|
|
&dd->pcidev->dev,
|
|
sdma_mapping_addr(descp),
|
|
sdma_mapping_len(descp),
|
|
DMA_TO_DEVICE);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* return the mode as indicated by the first
|
|
* descriptor in the tx.
|
|
*/
|
|
static inline u8 ahg_mode(struct sdma_txreq *tx)
|
|
{
|
|
return (tx->descp[0].qw[1] & SDMA_DESC1_HEADER_MODE_SMASK)
|
|
>> SDMA_DESC1_HEADER_MODE_SHIFT;
|
|
}
|
|
|
|
/**
|
|
* sdma_txclean() - clean tx of mappings, descp *kmalloc's
|
|
* @dd: hfi1_devdata for unmapping
|
|
* @tx: tx request to clean
|
|
*
|
|
* This is used in the progress routine to clean the tx or
|
|
* by the ULP to toss an in-process tx build.
|
|
*
|
|
* The code can be called multiple times without issue.
|
|
*
|
|
*/
|
|
void sdma_txclean(
|
|
struct hfi1_devdata *dd,
|
|
struct sdma_txreq *tx)
|
|
{
|
|
u16 i;
|
|
|
|
if (tx->num_desc) {
|
|
u8 skip = 0, mode = ahg_mode(tx);
|
|
|
|
/* unmap first */
|
|
sdma_unmap_desc(dd, &tx->descp[0]);
|
|
/* determine number of AHG descriptors to skip */
|
|
if (mode > SDMA_AHG_APPLY_UPDATE1)
|
|
skip = mode >> 1;
|
|
for (i = 1 + skip; i < tx->num_desc; i++)
|
|
sdma_unmap_desc(dd, &tx->descp[i]);
|
|
tx->num_desc = 0;
|
|
}
|
|
kfree(tx->coalesce_buf);
|
|
tx->coalesce_buf = NULL;
|
|
/* kmalloc'ed descp */
|
|
if (unlikely(tx->desc_limit > ARRAY_SIZE(tx->descs))) {
|
|
tx->desc_limit = ARRAY_SIZE(tx->descs);
|
|
kfree(tx->descp);
|
|
}
|
|
}
|
|
|
|
static inline u16 sdma_gethead(struct sdma_engine *sde)
|
|
{
|
|
struct hfi1_devdata *dd = sde->dd;
|
|
int use_dmahead;
|
|
u16 hwhead;
|
|
|
|
#ifdef CONFIG_SDMA_VERBOSITY
|
|
dd_dev_err(sde->dd, "CONFIG SDMA(%u) %s:%d %s()\n",
|
|
sde->this_idx, slashstrip(__FILE__), __LINE__, __func__);
|
|
#endif
|
|
|
|
retry:
|
|
use_dmahead = HFI1_CAP_IS_KSET(USE_SDMA_HEAD) && __sdma_running(sde) &&
|
|
(dd->flags & HFI1_HAS_SDMA_TIMEOUT);
|
|
hwhead = use_dmahead ?
|
|
(u16)le64_to_cpu(*sde->head_dma) :
|
|
(u16)read_sde_csr(sde, SD(HEAD));
|
|
|
|
if (unlikely(HFI1_CAP_IS_KSET(SDMA_HEAD_CHECK))) {
|
|
u16 cnt;
|
|
u16 swtail;
|
|
u16 swhead;
|
|
int sane;
|
|
|
|
swhead = sde->descq_head & sde->sdma_mask;
|
|
/* this code is really bad for cache line trading */
|
|
swtail = ACCESS_ONCE(sde->descq_tail) & sde->sdma_mask;
|
|
cnt = sde->descq_cnt;
|
|
|
|
if (swhead < swtail)
|
|
/* not wrapped */
|
|
sane = (hwhead >= swhead) & (hwhead <= swtail);
|
|
else if (swhead > swtail)
|
|
/* wrapped around */
|
|
sane = ((hwhead >= swhead) && (hwhead < cnt)) ||
|
|
(hwhead <= swtail);
|
|
else
|
|
/* empty */
|
|
sane = (hwhead == swhead);
|
|
|
|
if (unlikely(!sane)) {
|
|
dd_dev_err(dd, "SDMA(%u) bad head (%s) hwhd=%hu swhd=%hu swtl=%hu cnt=%hu\n",
|
|
sde->this_idx,
|
|
use_dmahead ? "dma" : "kreg",
|
|
hwhead, swhead, swtail, cnt);
|
|
if (use_dmahead) {
|
|
/* try one more time, using csr */
|
|
use_dmahead = 0;
|
|
goto retry;
|
|
}
|
|
/* proceed as if no progress */
|
|
hwhead = swhead;
|
|
}
|
|
}
|
|
return hwhead;
|
|
}
|
|
|
|
/*
|
|
* This is called when there are send DMA descriptors that might be
|
|
* available.
|
|
*
|
|
* This is called with head_lock held.
|
|
*/
|
|
static void sdma_desc_avail(struct sdma_engine *sde, unsigned avail)
|
|
{
|
|
struct iowait *wait, *nw;
|
|
struct iowait *waits[SDMA_WAIT_BATCH_SIZE];
|
|
unsigned i, n = 0, seq;
|
|
struct sdma_txreq *stx;
|
|
struct hfi1_ibdev *dev = &sde->dd->verbs_dev;
|
|
|
|
#ifdef CONFIG_SDMA_VERBOSITY
|
|
dd_dev_err(sde->dd, "CONFIG SDMA(%u) %s:%d %s()\n", sde->this_idx,
|
|
slashstrip(__FILE__), __LINE__, __func__);
|
|
dd_dev_err(sde->dd, "avail: %u\n", avail);
|
|
#endif
|
|
|
|
do {
|
|
seq = read_seqbegin(&dev->iowait_lock);
|
|
if (!list_empty(&sde->dmawait)) {
|
|
/* at least one item */
|
|
write_seqlock(&dev->iowait_lock);
|
|
/* Harvest waiters wanting DMA descriptors */
|
|
list_for_each_entry_safe(
|
|
wait,
|
|
nw,
|
|
&sde->dmawait,
|
|
list) {
|
|
u16 num_desc = 0;
|
|
|
|
if (!wait->wakeup)
|
|
continue;
|
|
if (n == ARRAY_SIZE(waits))
|
|
break;
|
|
if (!list_empty(&wait->tx_head)) {
|
|
stx = list_first_entry(
|
|
&wait->tx_head,
|
|
struct sdma_txreq,
|
|
list);
|
|
num_desc = stx->num_desc;
|
|
}
|
|
if (num_desc > avail)
|
|
break;
|
|
avail -= num_desc;
|
|
list_del_init(&wait->list);
|
|
waits[n++] = wait;
|
|
}
|
|
write_sequnlock(&dev->iowait_lock);
|
|
break;
|
|
}
|
|
} while (read_seqretry(&dev->iowait_lock, seq));
|
|
|
|
for (i = 0; i < n; i++)
|
|
waits[i]->wakeup(waits[i], SDMA_AVAIL_REASON);
|
|
}
|
|
|
|
/* head_lock must be held */
|
|
static void sdma_make_progress(struct sdma_engine *sde, u64 status)
|
|
{
|
|
struct sdma_txreq *txp = NULL;
|
|
int progress = 0;
|
|
u16 hwhead, swhead;
|
|
int idle_check_done = 0;
|
|
|
|
hwhead = sdma_gethead(sde);
|
|
|
|
/* The reason for some of the complexity of this code is that
|
|
* not all descriptors have corresponding txps. So, we have to
|
|
* be able to skip over descs until we wander into the range of
|
|
* the next txp on the list.
|
|
*/
|
|
|
|
retry:
|
|
txp = get_txhead(sde);
|
|
swhead = sde->descq_head & sde->sdma_mask;
|
|
trace_hfi1_sdma_progress(sde, hwhead, swhead, txp);
|
|
while (swhead != hwhead) {
|
|
/* advance head, wrap if needed */
|
|
swhead = ++sde->descq_head & sde->sdma_mask;
|
|
|
|
/* if now past this txp's descs, do the callback */
|
|
if (txp && txp->next_descq_idx == swhead) {
|
|
/* remove from list */
|
|
sde->tx_ring[sde->tx_head++ & sde->sdma_mask] = NULL;
|
|
complete_tx(sde, txp, SDMA_TXREQ_S_OK);
|
|
/* see if there is another txp */
|
|
txp = get_txhead(sde);
|
|
}
|
|
trace_hfi1_sdma_progress(sde, hwhead, swhead, txp);
|
|
progress++;
|
|
}
|
|
|
|
/*
|
|
* The SDMA idle interrupt is not guaranteed to be ordered with respect
|
|
* to updates to the the dma_head location in host memory. The head
|
|
* value read might not be fully up to date. If there are pending
|
|
* descriptors and the SDMA idle interrupt fired then read from the
|
|
* CSR SDMA head instead to get the latest value from the hardware.
|
|
* The hardware SDMA head should be read at most once in this invocation
|
|
* of sdma_make_progress(..) which is ensured by idle_check_done flag
|
|
*/
|
|
if ((status & sde->idle_mask) && !idle_check_done) {
|
|
u16 swtail;
|
|
|
|
swtail = ACCESS_ONCE(sde->descq_tail) & sde->sdma_mask;
|
|
if (swtail != hwhead) {
|
|
hwhead = (u16)read_sde_csr(sde, SD(HEAD));
|
|
idle_check_done = 1;
|
|
goto retry;
|
|
}
|
|
}
|
|
|
|
sde->last_status = status;
|
|
if (progress)
|
|
sdma_desc_avail(sde, sdma_descq_freecnt(sde));
|
|
}
|
|
|
|
/*
|
|
* sdma_engine_interrupt() - interrupt handler for engine
|
|
* @sde: sdma engine
|
|
* @status: sdma interrupt reason
|
|
*
|
|
* Status is a mask of the 3 possible interrupts for this engine. It will
|
|
* contain bits _only_ for this SDMA engine. It will contain at least one
|
|
* bit, it may contain more.
|
|
*/
|
|
void sdma_engine_interrupt(struct sdma_engine *sde, u64 status)
|
|
{
|
|
trace_hfi1_sdma_engine_interrupt(sde, status);
|
|
write_seqlock(&sde->head_lock);
|
|
sdma_set_desc_cnt(sde, sdma_desct_intr);
|
|
if (status & sde->idle_mask)
|
|
sde->idle_int_cnt++;
|
|
else if (status & sde->progress_mask)
|
|
sde->progress_int_cnt++;
|
|
else if (status & sde->int_mask)
|
|
sde->sdma_int_cnt++;
|
|
sdma_make_progress(sde, status);
|
|
write_sequnlock(&sde->head_lock);
|
|
}
|
|
|
|
/**
|
|
* sdma_engine_error() - error handler for engine
|
|
* @sde: sdma engine
|
|
* @status: sdma interrupt reason
|
|
*/
|
|
void sdma_engine_error(struct sdma_engine *sde, u64 status)
|
|
{
|
|
unsigned long flags;
|
|
|
|
#ifdef CONFIG_SDMA_VERBOSITY
|
|
dd_dev_err(sde->dd, "CONFIG SDMA(%u) error status 0x%llx state %s\n",
|
|
sde->this_idx,
|
|
(unsigned long long)status,
|
|
sdma_state_names[sde->state.current_state]);
|
|
#endif
|
|
spin_lock_irqsave(&sde->tail_lock, flags);
|
|
write_seqlock(&sde->head_lock);
|
|
if (status & ALL_SDMA_ENG_HALT_ERRS)
|
|
__sdma_process_event(sde, sdma_event_e60_hw_halted);
|
|
if (status & ~SD(ENG_ERR_STATUS_SDMA_HALT_ERR_SMASK)) {
|
|
dd_dev_err(sde->dd,
|
|
"SDMA (%u) engine error: 0x%llx state %s\n",
|
|
sde->this_idx,
|
|
(unsigned long long)status,
|
|
sdma_state_names[sde->state.current_state]);
|
|
dump_sdma_state(sde);
|
|
}
|
|
write_sequnlock(&sde->head_lock);
|
|
spin_unlock_irqrestore(&sde->tail_lock, flags);
|
|
}
|
|
|
|
static void sdma_sendctrl(struct sdma_engine *sde, unsigned op)
|
|
{
|
|
u64 set_senddmactrl = 0;
|
|
u64 clr_senddmactrl = 0;
|
|
unsigned long flags;
|
|
|
|
#ifdef CONFIG_SDMA_VERBOSITY
|
|
dd_dev_err(sde->dd, "CONFIG SDMA(%u) senddmactrl E=%d I=%d H=%d C=%d\n",
|
|
sde->this_idx,
|
|
(op & SDMA_SENDCTRL_OP_ENABLE) ? 1 : 0,
|
|
(op & SDMA_SENDCTRL_OP_INTENABLE) ? 1 : 0,
|
|
(op & SDMA_SENDCTRL_OP_HALT) ? 1 : 0,
|
|
(op & SDMA_SENDCTRL_OP_CLEANUP) ? 1 : 0);
|
|
#endif
|
|
|
|
if (op & SDMA_SENDCTRL_OP_ENABLE)
|
|
set_senddmactrl |= SD(CTRL_SDMA_ENABLE_SMASK);
|
|
else
|
|
clr_senddmactrl |= SD(CTRL_SDMA_ENABLE_SMASK);
|
|
|
|
if (op & SDMA_SENDCTRL_OP_INTENABLE)
|
|
set_senddmactrl |= SD(CTRL_SDMA_INT_ENABLE_SMASK);
|
|
else
|
|
clr_senddmactrl |= SD(CTRL_SDMA_INT_ENABLE_SMASK);
|
|
|
|
if (op & SDMA_SENDCTRL_OP_HALT)
|
|
set_senddmactrl |= SD(CTRL_SDMA_HALT_SMASK);
|
|
else
|
|
clr_senddmactrl |= SD(CTRL_SDMA_HALT_SMASK);
|
|
|
|
spin_lock_irqsave(&sde->senddmactrl_lock, flags);
|
|
|
|
sde->p_senddmactrl |= set_senddmactrl;
|
|
sde->p_senddmactrl &= ~clr_senddmactrl;
|
|
|
|
if (op & SDMA_SENDCTRL_OP_CLEANUP)
|
|
write_sde_csr(sde, SD(CTRL),
|
|
sde->p_senddmactrl |
|
|
SD(CTRL_SDMA_CLEANUP_SMASK));
|
|
else
|
|
write_sde_csr(sde, SD(CTRL), sde->p_senddmactrl);
|
|
|
|
spin_unlock_irqrestore(&sde->senddmactrl_lock, flags);
|
|
|
|
#ifdef CONFIG_SDMA_VERBOSITY
|
|
sdma_dumpstate(sde);
|
|
#endif
|
|
}
|
|
|
|
static void sdma_setlengen(struct sdma_engine *sde)
|
|
{
|
|
#ifdef CONFIG_SDMA_VERBOSITY
|
|
dd_dev_err(sde->dd, "CONFIG SDMA(%u) %s:%d %s()\n",
|
|
sde->this_idx, slashstrip(__FILE__), __LINE__, __func__);
|
|
#endif
|
|
|
|
/*
|
|
* Set SendDmaLenGen and clear-then-set the MSB of the generation
|
|
* count to enable generation checking and load the internal
|
|
* generation counter.
|
|
*/
|
|
write_sde_csr(sde, SD(LEN_GEN),
|
|
(sde->descq_cnt / 64) << SD(LEN_GEN_LENGTH_SHIFT));
|
|
write_sde_csr(sde, SD(LEN_GEN),
|
|
((sde->descq_cnt / 64) << SD(LEN_GEN_LENGTH_SHIFT)) |
|
|
(4ULL << SD(LEN_GEN_GENERATION_SHIFT)));
|
|
}
|
|
|
|
static inline void sdma_update_tail(struct sdma_engine *sde, u16 tail)
|
|
{
|
|
/* Commit writes to memory and advance the tail on the chip */
|
|
smp_wmb(); /* see get_txhead() */
|
|
writeq(tail, sde->tail_csr);
|
|
}
|
|
|
|
/*
|
|
* This is called when changing to state s10_hw_start_up_halt_wait as
|
|
* a result of send buffer errors or send DMA descriptor errors.
|
|
*/
|
|
static void sdma_hw_start_up(struct sdma_engine *sde)
|
|
{
|
|
u64 reg;
|
|
|
|
#ifdef CONFIG_SDMA_VERBOSITY
|
|
dd_dev_err(sde->dd, "CONFIG SDMA(%u) %s:%d %s()\n",
|
|
sde->this_idx, slashstrip(__FILE__), __LINE__, __func__);
|
|
#endif
|
|
|
|
sdma_setlengen(sde);
|
|
sdma_update_tail(sde, 0); /* Set SendDmaTail */
|
|
*sde->head_dma = 0;
|
|
|
|
reg = SD(ENG_ERR_CLEAR_SDMA_HEADER_REQUEST_FIFO_UNC_ERR_MASK) <<
|
|
SD(ENG_ERR_CLEAR_SDMA_HEADER_REQUEST_FIFO_UNC_ERR_SHIFT);
|
|
write_sde_csr(sde, SD(ENG_ERR_CLEAR), reg);
|
|
}
|
|
|
|
#define CLEAR_STATIC_RATE_CONTROL_SMASK(r) \
|
|
(r &= ~SEND_DMA_CHECK_ENABLE_DISALLOW_PBC_STATIC_RATE_CONTROL_SMASK)
|
|
|
|
#define SET_STATIC_RATE_CONTROL_SMASK(r) \
|
|
(r |= SEND_DMA_CHECK_ENABLE_DISALLOW_PBC_STATIC_RATE_CONTROL_SMASK)
|
|
/*
|
|
* set_sdma_integrity
|
|
*
|
|
* Set the SEND_DMA_CHECK_ENABLE register for send DMA engine 'sde'.
|
|
*/
|
|
static void set_sdma_integrity(struct sdma_engine *sde)
|
|
{
|
|
struct hfi1_devdata *dd = sde->dd;
|
|
u64 reg;
|
|
|
|
if (unlikely(HFI1_CAP_IS_KSET(NO_INTEGRITY)))
|
|
return;
|
|
|
|
reg = hfi1_pkt_base_sdma_integrity(dd);
|
|
|
|
if (HFI1_CAP_IS_KSET(STATIC_RATE_CTRL))
|
|
CLEAR_STATIC_RATE_CONTROL_SMASK(reg);
|
|
else
|
|
SET_STATIC_RATE_CONTROL_SMASK(reg);
|
|
|
|
write_sde_csr(sde, SD(CHECK_ENABLE), reg);
|
|
}
|
|
|
|
static void init_sdma_regs(
|
|
struct sdma_engine *sde,
|
|
u32 credits,
|
|
uint idle_cnt)
|
|
{
|
|
u8 opval, opmask;
|
|
#ifdef CONFIG_SDMA_VERBOSITY
|
|
struct hfi1_devdata *dd = sde->dd;
|
|
|
|
dd_dev_err(dd, "CONFIG SDMA(%u) %s:%d %s()\n",
|
|
sde->this_idx, slashstrip(__FILE__), __LINE__, __func__);
|
|
#endif
|
|
|
|
write_sde_csr(sde, SD(BASE_ADDR), sde->descq_phys);
|
|
sdma_setlengen(sde);
|
|
sdma_update_tail(sde, 0); /* Set SendDmaTail */
|
|
write_sde_csr(sde, SD(RELOAD_CNT), idle_cnt);
|
|
write_sde_csr(sde, SD(DESC_CNT), 0);
|
|
write_sde_csr(sde, SD(HEAD_ADDR), sde->head_phys);
|
|
write_sde_csr(sde, SD(MEMORY),
|
|
((u64)credits << SD(MEMORY_SDMA_MEMORY_CNT_SHIFT)) |
|
|
((u64)(credits * sde->this_idx) <<
|
|
SD(MEMORY_SDMA_MEMORY_INDEX_SHIFT)));
|
|
write_sde_csr(sde, SD(ENG_ERR_MASK), ~0ull);
|
|
set_sdma_integrity(sde);
|
|
opmask = OPCODE_CHECK_MASK_DISABLED;
|
|
opval = OPCODE_CHECK_VAL_DISABLED;
|
|
write_sde_csr(sde, SD(CHECK_OPCODE),
|
|
(opmask << SEND_CTXT_CHECK_OPCODE_MASK_SHIFT) |
|
|
(opval << SEND_CTXT_CHECK_OPCODE_VALUE_SHIFT));
|
|
}
|
|
|
|
#ifdef CONFIG_SDMA_VERBOSITY
|
|
|
|
#define sdma_dumpstate_helper0(reg) do { \
|
|
csr = read_csr(sde->dd, reg); \
|
|
dd_dev_err(sde->dd, "%36s 0x%016llx\n", #reg, csr); \
|
|
} while (0)
|
|
|
|
#define sdma_dumpstate_helper(reg) do { \
|
|
csr = read_sde_csr(sde, reg); \
|
|
dd_dev_err(sde->dd, "%36s[%02u] 0x%016llx\n", \
|
|
#reg, sde->this_idx, csr); \
|
|
} while (0)
|
|
|
|
#define sdma_dumpstate_helper2(reg) do { \
|
|
csr = read_csr(sde->dd, reg + (8 * i)); \
|
|
dd_dev_err(sde->dd, "%33s_%02u 0x%016llx\n", \
|
|
#reg, i, csr); \
|
|
} while (0)
|
|
|
|
void sdma_dumpstate(struct sdma_engine *sde)
|
|
{
|
|
u64 csr;
|
|
unsigned i;
|
|
|
|
sdma_dumpstate_helper(SD(CTRL));
|
|
sdma_dumpstate_helper(SD(STATUS));
|
|
sdma_dumpstate_helper0(SD(ERR_STATUS));
|
|
sdma_dumpstate_helper0(SD(ERR_MASK));
|
|
sdma_dumpstate_helper(SD(ENG_ERR_STATUS));
|
|
sdma_dumpstate_helper(SD(ENG_ERR_MASK));
|
|
|
|
for (i = 0; i < CCE_NUM_INT_CSRS; ++i) {
|
|
sdma_dumpstate_helper2(CCE_INT_STATUS);
|
|
sdma_dumpstate_helper2(CCE_INT_MASK);
|
|
sdma_dumpstate_helper2(CCE_INT_BLOCKED);
|
|
}
|
|
|
|
sdma_dumpstate_helper(SD(TAIL));
|
|
sdma_dumpstate_helper(SD(HEAD));
|
|
sdma_dumpstate_helper(SD(PRIORITY_THLD));
|
|
sdma_dumpstate_helper(SD(IDLE_CNT));
|
|
sdma_dumpstate_helper(SD(RELOAD_CNT));
|
|
sdma_dumpstate_helper(SD(DESC_CNT));
|
|
sdma_dumpstate_helper(SD(DESC_FETCHED_CNT));
|
|
sdma_dumpstate_helper(SD(MEMORY));
|
|
sdma_dumpstate_helper0(SD(ENGINES));
|
|
sdma_dumpstate_helper0(SD(MEM_SIZE));
|
|
/* sdma_dumpstate_helper(SEND_EGRESS_SEND_DMA_STATUS); */
|
|
sdma_dumpstate_helper(SD(BASE_ADDR));
|
|
sdma_dumpstate_helper(SD(LEN_GEN));
|
|
sdma_dumpstate_helper(SD(HEAD_ADDR));
|
|
sdma_dumpstate_helper(SD(CHECK_ENABLE));
|
|
sdma_dumpstate_helper(SD(CHECK_VL));
|
|
sdma_dumpstate_helper(SD(CHECK_JOB_KEY));
|
|
sdma_dumpstate_helper(SD(CHECK_PARTITION_KEY));
|
|
sdma_dumpstate_helper(SD(CHECK_SLID));
|
|
sdma_dumpstate_helper(SD(CHECK_OPCODE));
|
|
}
|
|
#endif
|
|
|
|
static void dump_sdma_state(struct sdma_engine *sde)
|
|
{
|
|
struct hw_sdma_desc *descq;
|
|
struct hw_sdma_desc *descqp;
|
|
u64 desc[2];
|
|
u64 addr;
|
|
u8 gen;
|
|
u16 len;
|
|
u16 head, tail, cnt;
|
|
|
|
head = sde->descq_head & sde->sdma_mask;
|
|
tail = sde->descq_tail & sde->sdma_mask;
|
|
cnt = sdma_descq_freecnt(sde);
|
|
descq = sde->descq;
|
|
|
|
dd_dev_err(sde->dd,
|
|
"SDMA (%u) descq_head: %u descq_tail: %u freecnt: %u FLE %d\n",
|
|
sde->this_idx, head, tail, cnt,
|
|
!list_empty(&sde->flushlist));
|
|
|
|
/* print info for each entry in the descriptor queue */
|
|
while (head != tail) {
|
|
char flags[6] = { 'x', 'x', 'x', 'x', 0 };
|
|
|
|
descqp = &sde->descq[head];
|
|
desc[0] = le64_to_cpu(descqp->qw[0]);
|
|
desc[1] = le64_to_cpu(descqp->qw[1]);
|
|
flags[0] = (desc[1] & SDMA_DESC1_INT_REQ_FLAG) ? 'I' : '-';
|
|
flags[1] = (desc[1] & SDMA_DESC1_HEAD_TO_HOST_FLAG) ?
|
|
'H' : '-';
|
|
flags[2] = (desc[0] & SDMA_DESC0_FIRST_DESC_FLAG) ? 'F' : '-';
|
|
flags[3] = (desc[0] & SDMA_DESC0_LAST_DESC_FLAG) ? 'L' : '-';
|
|
addr = (desc[0] >> SDMA_DESC0_PHY_ADDR_SHIFT)
|
|
& SDMA_DESC0_PHY_ADDR_MASK;
|
|
gen = (desc[1] >> SDMA_DESC1_GENERATION_SHIFT)
|
|
& SDMA_DESC1_GENERATION_MASK;
|
|
len = (desc[0] >> SDMA_DESC0_BYTE_COUNT_SHIFT)
|
|
& SDMA_DESC0_BYTE_COUNT_MASK;
|
|
dd_dev_err(sde->dd,
|
|
"SDMA sdmadesc[%u]: flags:%s addr:0x%016llx gen:%u len:%u bytes\n",
|
|
head, flags, addr, gen, len);
|
|
dd_dev_err(sde->dd,
|
|
"\tdesc0:0x%016llx desc1 0x%016llx\n",
|
|
desc[0], desc[1]);
|
|
if (desc[0] & SDMA_DESC0_FIRST_DESC_FLAG)
|
|
dd_dev_err(sde->dd,
|
|
"\taidx: %u amode: %u alen: %u\n",
|
|
(u8)((desc[1] &
|
|
SDMA_DESC1_HEADER_INDEX_SMASK) >>
|
|
SDMA_DESC1_HEADER_INDEX_SHIFT),
|
|
(u8)((desc[1] &
|
|
SDMA_DESC1_HEADER_MODE_SMASK) >>
|
|
SDMA_DESC1_HEADER_MODE_SHIFT),
|
|
(u8)((desc[1] &
|
|
SDMA_DESC1_HEADER_DWS_SMASK) >>
|
|
SDMA_DESC1_HEADER_DWS_SHIFT));
|
|
head++;
|
|
head &= sde->sdma_mask;
|
|
}
|
|
}
|
|
|
|
#define SDE_FMT \
|
|
"SDE %u CPU %d STE %s C 0x%llx S 0x%016llx E 0x%llx T(HW) 0x%llx T(SW) 0x%x H(HW) 0x%llx H(SW) 0x%x H(D) 0x%llx DM 0x%llx GL 0x%llx R 0x%llx LIS 0x%llx AHGI 0x%llx TXT %u TXH %u DT %u DH %u FLNE %d DQF %u SLC 0x%llx\n"
|
|
/**
|
|
* sdma_seqfile_dump_sde() - debugfs dump of sde
|
|
* @s: seq file
|
|
* @sde: send dma engine to dump
|
|
*
|
|
* This routine dumps the sde to the indicated seq file.
|
|
*/
|
|
void sdma_seqfile_dump_sde(struct seq_file *s, struct sdma_engine *sde)
|
|
{
|
|
u16 head, tail;
|
|
struct hw_sdma_desc *descqp;
|
|
u64 desc[2];
|
|
u64 addr;
|
|
u8 gen;
|
|
u16 len;
|
|
|
|
head = sde->descq_head & sde->sdma_mask;
|
|
tail = ACCESS_ONCE(sde->descq_tail) & sde->sdma_mask;
|
|
seq_printf(s, SDE_FMT, sde->this_idx,
|
|
sde->cpu,
|
|
sdma_state_name(sde->state.current_state),
|
|
(unsigned long long)read_sde_csr(sde, SD(CTRL)),
|
|
(unsigned long long)read_sde_csr(sde, SD(STATUS)),
|
|
(unsigned long long)read_sde_csr(sde, SD(ENG_ERR_STATUS)),
|
|
(unsigned long long)read_sde_csr(sde, SD(TAIL)), tail,
|
|
(unsigned long long)read_sde_csr(sde, SD(HEAD)), head,
|
|
(unsigned long long)le64_to_cpu(*sde->head_dma),
|
|
(unsigned long long)read_sde_csr(sde, SD(MEMORY)),
|
|
(unsigned long long)read_sde_csr(sde, SD(LEN_GEN)),
|
|
(unsigned long long)read_sde_csr(sde, SD(RELOAD_CNT)),
|
|
(unsigned long long)sde->last_status,
|
|
(unsigned long long)sde->ahg_bits,
|
|
sde->tx_tail,
|
|
sde->tx_head,
|
|
sde->descq_tail,
|
|
sde->descq_head,
|
|
!list_empty(&sde->flushlist),
|
|
sde->descq_full_count,
|
|
(unsigned long long)read_sde_csr(sde, SEND_DMA_CHECK_SLID));
|
|
|
|
/* print info for each entry in the descriptor queue */
|
|
while (head != tail) {
|
|
char flags[6] = { 'x', 'x', 'x', 'x', 0 };
|
|
|
|
descqp = &sde->descq[head];
|
|
desc[0] = le64_to_cpu(descqp->qw[0]);
|
|
desc[1] = le64_to_cpu(descqp->qw[1]);
|
|
flags[0] = (desc[1] & SDMA_DESC1_INT_REQ_FLAG) ? 'I' : '-';
|
|
flags[1] = (desc[1] & SDMA_DESC1_HEAD_TO_HOST_FLAG) ?
|
|
'H' : '-';
|
|
flags[2] = (desc[0] & SDMA_DESC0_FIRST_DESC_FLAG) ? 'F' : '-';
|
|
flags[3] = (desc[0] & SDMA_DESC0_LAST_DESC_FLAG) ? 'L' : '-';
|
|
addr = (desc[0] >> SDMA_DESC0_PHY_ADDR_SHIFT)
|
|
& SDMA_DESC0_PHY_ADDR_MASK;
|
|
gen = (desc[1] >> SDMA_DESC1_GENERATION_SHIFT)
|
|
& SDMA_DESC1_GENERATION_MASK;
|
|
len = (desc[0] >> SDMA_DESC0_BYTE_COUNT_SHIFT)
|
|
& SDMA_DESC0_BYTE_COUNT_MASK;
|
|
seq_printf(s,
|
|
"\tdesc[%u]: flags:%s addr:0x%016llx gen:%u len:%u bytes\n",
|
|
head, flags, addr, gen, len);
|
|
if (desc[0] & SDMA_DESC0_FIRST_DESC_FLAG)
|
|
seq_printf(s, "\t\tahgidx: %u ahgmode: %u\n",
|
|
(u8)((desc[1] &
|
|
SDMA_DESC1_HEADER_INDEX_SMASK) >>
|
|
SDMA_DESC1_HEADER_INDEX_SHIFT),
|
|
(u8)((desc[1] &
|
|
SDMA_DESC1_HEADER_MODE_SMASK) >>
|
|
SDMA_DESC1_HEADER_MODE_SHIFT));
|
|
head = (head + 1) & sde->sdma_mask;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* add the generation number into
|
|
* the qw1 and return
|
|
*/
|
|
static inline u64 add_gen(struct sdma_engine *sde, u64 qw1)
|
|
{
|
|
u8 generation = (sde->descq_tail >> sde->sdma_shift) & 3;
|
|
|
|
qw1 &= ~SDMA_DESC1_GENERATION_SMASK;
|
|
qw1 |= ((u64)generation & SDMA_DESC1_GENERATION_MASK)
|
|
<< SDMA_DESC1_GENERATION_SHIFT;
|
|
return qw1;
|
|
}
|
|
|
|
/*
|
|
* This routine submits the indicated tx
|
|
*
|
|
* Space has already been guaranteed and
|
|
* tail side of ring is locked.
|
|
*
|
|
* The hardware tail update is done
|
|
* in the caller and that is facilitated
|
|
* by returning the new tail.
|
|
*
|
|
* There is special case logic for ahg
|
|
* to not add the generation number for
|
|
* up to 2 descriptors that follow the
|
|
* first descriptor.
|
|
*
|
|
*/
|
|
static inline u16 submit_tx(struct sdma_engine *sde, struct sdma_txreq *tx)
|
|
{
|
|
int i;
|
|
u16 tail;
|
|
struct sdma_desc *descp = tx->descp;
|
|
u8 skip = 0, mode = ahg_mode(tx);
|
|
|
|
tail = sde->descq_tail & sde->sdma_mask;
|
|
sde->descq[tail].qw[0] = cpu_to_le64(descp->qw[0]);
|
|
sde->descq[tail].qw[1] = cpu_to_le64(add_gen(sde, descp->qw[1]));
|
|
trace_hfi1_sdma_descriptor(sde, descp->qw[0], descp->qw[1],
|
|
tail, &sde->descq[tail]);
|
|
tail = ++sde->descq_tail & sde->sdma_mask;
|
|
descp++;
|
|
if (mode > SDMA_AHG_APPLY_UPDATE1)
|
|
skip = mode >> 1;
|
|
for (i = 1; i < tx->num_desc; i++, descp++) {
|
|
u64 qw1;
|
|
|
|
sde->descq[tail].qw[0] = cpu_to_le64(descp->qw[0]);
|
|
if (skip) {
|
|
/* edits don't have generation */
|
|
qw1 = descp->qw[1];
|
|
skip--;
|
|
} else {
|
|
/* replace generation with real one for non-edits */
|
|
qw1 = add_gen(sde, descp->qw[1]);
|
|
}
|
|
sde->descq[tail].qw[1] = cpu_to_le64(qw1);
|
|
trace_hfi1_sdma_descriptor(sde, descp->qw[0], qw1,
|
|
tail, &sde->descq[tail]);
|
|
tail = ++sde->descq_tail & sde->sdma_mask;
|
|
}
|
|
tx->next_descq_idx = tail;
|
|
#ifdef CONFIG_HFI1_DEBUG_SDMA_ORDER
|
|
tx->sn = sde->tail_sn++;
|
|
trace_hfi1_sdma_in_sn(sde, tx->sn);
|
|
WARN_ON_ONCE(sde->tx_ring[sde->tx_tail & sde->sdma_mask]);
|
|
#endif
|
|
sde->tx_ring[sde->tx_tail++ & sde->sdma_mask] = tx;
|
|
sde->desc_avail -= tx->num_desc;
|
|
return tail;
|
|
}
|
|
|
|
/*
|
|
* Check for progress
|
|
*/
|
|
static int sdma_check_progress(
|
|
struct sdma_engine *sde,
|
|
struct iowait *wait,
|
|
struct sdma_txreq *tx)
|
|
{
|
|
int ret;
|
|
|
|
sde->desc_avail = sdma_descq_freecnt(sde);
|
|
if (tx->num_desc <= sde->desc_avail)
|
|
return -EAGAIN;
|
|
/* pulse the head_lock */
|
|
if (wait && wait->sleep) {
|
|
unsigned seq;
|
|
|
|
seq = raw_seqcount_begin(
|
|
(const seqcount_t *)&sde->head_lock.seqcount);
|
|
ret = wait->sleep(sde, wait, tx, seq);
|
|
if (ret == -EAGAIN)
|
|
sde->desc_avail = sdma_descq_freecnt(sde);
|
|
} else {
|
|
ret = -EBUSY;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* sdma_send_txreq() - submit a tx req to ring
|
|
* @sde: sdma engine to use
|
|
* @wait: wait structure to use when full (may be NULL)
|
|
* @tx: sdma_txreq to submit
|
|
*
|
|
* The call submits the tx into the ring. If a iowait structure is non-NULL
|
|
* the packet will be queued to the list in wait.
|
|
*
|
|
* Return:
|
|
* 0 - Success, -EINVAL - sdma_txreq incomplete, -EBUSY - no space in
|
|
* ring (wait == NULL)
|
|
* -EIOCBQUEUED - tx queued to iowait, -ECOMM bad sdma state
|
|
*/
|
|
int sdma_send_txreq(struct sdma_engine *sde,
|
|
struct iowait *wait,
|
|
struct sdma_txreq *tx)
|
|
{
|
|
int ret = 0;
|
|
u16 tail;
|
|
unsigned long flags;
|
|
|
|
/* user should have supplied entire packet */
|
|
if (unlikely(tx->tlen))
|
|
return -EINVAL;
|
|
tx->wait = wait;
|
|
spin_lock_irqsave(&sde->tail_lock, flags);
|
|
retry:
|
|
if (unlikely(!__sdma_running(sde)))
|
|
goto unlock_noconn;
|
|
if (unlikely(tx->num_desc > sde->desc_avail))
|
|
goto nodesc;
|
|
tail = submit_tx(sde, tx);
|
|
if (wait)
|
|
iowait_sdma_inc(wait);
|
|
sdma_update_tail(sde, tail);
|
|
unlock:
|
|
spin_unlock_irqrestore(&sde->tail_lock, flags);
|
|
return ret;
|
|
unlock_noconn:
|
|
if (wait)
|
|
iowait_sdma_inc(wait);
|
|
tx->next_descq_idx = 0;
|
|
#ifdef CONFIG_HFI1_DEBUG_SDMA_ORDER
|
|
tx->sn = sde->tail_sn++;
|
|
trace_hfi1_sdma_in_sn(sde, tx->sn);
|
|
#endif
|
|
spin_lock(&sde->flushlist_lock);
|
|
list_add_tail(&tx->list, &sde->flushlist);
|
|
spin_unlock(&sde->flushlist_lock);
|
|
if (wait) {
|
|
wait->tx_count++;
|
|
wait->count += tx->num_desc;
|
|
}
|
|
schedule_work(&sde->flush_worker);
|
|
ret = -ECOMM;
|
|
goto unlock;
|
|
nodesc:
|
|
ret = sdma_check_progress(sde, wait, tx);
|
|
if (ret == -EAGAIN) {
|
|
ret = 0;
|
|
goto retry;
|
|
}
|
|
sde->descq_full_count++;
|
|
goto unlock;
|
|
}
|
|
|
|
/**
|
|
* sdma_send_txlist() - submit a list of tx req to ring
|
|
* @sde: sdma engine to use
|
|
* @wait: wait structure to use when full (may be NULL)
|
|
* @tx_list: list of sdma_txreqs to submit
|
|
*
|
|
* The call submits the list into the ring.
|
|
*
|
|
* If the iowait structure is non-NULL and not equal to the iowait list
|
|
* the unprocessed part of the list will be appended to the list in wait.
|
|
*
|
|
* In all cases, the tx_list will be updated so the head of the tx_list is
|
|
* the list of descriptors that have yet to be transmitted.
|
|
*
|
|
* The intent of this call is to provide a more efficient
|
|
* way of submitting multiple packets to SDMA while holding the tail
|
|
* side locking.
|
|
*
|
|
* Return:
|
|
* > 0 - Success (value is number of sdma_txreq's submitted),
|
|
* -EINVAL - sdma_txreq incomplete, -EBUSY - no space in ring (wait == NULL)
|
|
* -EIOCBQUEUED - tx queued to iowait, -ECOMM bad sdma state
|
|
*/
|
|
int sdma_send_txlist(struct sdma_engine *sde, struct iowait *wait,
|
|
struct list_head *tx_list)
|
|
{
|
|
struct sdma_txreq *tx, *tx_next;
|
|
int ret = 0;
|
|
unsigned long flags;
|
|
u16 tail = INVALID_TAIL;
|
|
int count = 0;
|
|
|
|
spin_lock_irqsave(&sde->tail_lock, flags);
|
|
retry:
|
|
list_for_each_entry_safe(tx, tx_next, tx_list, list) {
|
|
tx->wait = wait;
|
|
if (unlikely(!__sdma_running(sde)))
|
|
goto unlock_noconn;
|
|
if (unlikely(tx->num_desc > sde->desc_avail))
|
|
goto nodesc;
|
|
if (unlikely(tx->tlen)) {
|
|
ret = -EINVAL;
|
|
goto update_tail;
|
|
}
|
|
list_del_init(&tx->list);
|
|
tail = submit_tx(sde, tx);
|
|
count++;
|
|
if (tail != INVALID_TAIL &&
|
|
(count & SDMA_TAIL_UPDATE_THRESH) == 0) {
|
|
sdma_update_tail(sde, tail);
|
|
tail = INVALID_TAIL;
|
|
}
|
|
}
|
|
update_tail:
|
|
if (wait)
|
|
iowait_sdma_add(wait, count);
|
|
if (tail != INVALID_TAIL)
|
|
sdma_update_tail(sde, tail);
|
|
spin_unlock_irqrestore(&sde->tail_lock, flags);
|
|
return ret == 0 ? count : ret;
|
|
unlock_noconn:
|
|
spin_lock(&sde->flushlist_lock);
|
|
list_for_each_entry_safe(tx, tx_next, tx_list, list) {
|
|
tx->wait = wait;
|
|
list_del_init(&tx->list);
|
|
if (wait)
|
|
iowait_sdma_inc(wait);
|
|
tx->next_descq_idx = 0;
|
|
#ifdef CONFIG_HFI1_DEBUG_SDMA_ORDER
|
|
tx->sn = sde->tail_sn++;
|
|
trace_hfi1_sdma_in_sn(sde, tx->sn);
|
|
#endif
|
|
list_add_tail(&tx->list, &sde->flushlist);
|
|
if (wait) {
|
|
wait->tx_count++;
|
|
wait->count += tx->num_desc;
|
|
}
|
|
}
|
|
spin_unlock(&sde->flushlist_lock);
|
|
schedule_work(&sde->flush_worker);
|
|
ret = -ECOMM;
|
|
goto update_tail;
|
|
nodesc:
|
|
ret = sdma_check_progress(sde, wait, tx);
|
|
if (ret == -EAGAIN) {
|
|
ret = 0;
|
|
goto retry;
|
|
}
|
|
sde->descq_full_count++;
|
|
goto update_tail;
|
|
}
|
|
|
|
static void sdma_process_event(struct sdma_engine *sde, enum sdma_events event)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&sde->tail_lock, flags);
|
|
write_seqlock(&sde->head_lock);
|
|
|
|
__sdma_process_event(sde, event);
|
|
|
|
if (sde->state.current_state == sdma_state_s99_running)
|
|
sdma_desc_avail(sde, sdma_descq_freecnt(sde));
|
|
|
|
write_sequnlock(&sde->head_lock);
|
|
spin_unlock_irqrestore(&sde->tail_lock, flags);
|
|
}
|
|
|
|
static void __sdma_process_event(struct sdma_engine *sde,
|
|
enum sdma_events event)
|
|
{
|
|
struct sdma_state *ss = &sde->state;
|
|
int need_progress = 0;
|
|
|
|
/* CONFIG SDMA temporary */
|
|
#ifdef CONFIG_SDMA_VERBOSITY
|
|
dd_dev_err(sde->dd, "CONFIG SDMA(%u) [%s] %s\n", sde->this_idx,
|
|
sdma_state_names[ss->current_state],
|
|
sdma_event_names[event]);
|
|
#endif
|
|
|
|
switch (ss->current_state) {
|
|
case sdma_state_s00_hw_down:
|
|
switch (event) {
|
|
case sdma_event_e00_go_hw_down:
|
|
break;
|
|
case sdma_event_e30_go_running:
|
|
/*
|
|
* If down, but running requested (usually result
|
|
* of link up, then we need to start up.
|
|
* This can happen when hw down is requested while
|
|
* bringing the link up with traffic active on
|
|
* 7220, e.g.
|
|
*/
|
|
ss->go_s99_running = 1;
|
|
/* fall through and start dma engine */
|
|
case sdma_event_e10_go_hw_start:
|
|
/* This reference means the state machine is started */
|
|
sdma_get(&sde->state);
|
|
sdma_set_state(sde,
|
|
sdma_state_s10_hw_start_up_halt_wait);
|
|
break;
|
|
case sdma_event_e15_hw_halt_done:
|
|
break;
|
|
case sdma_event_e25_hw_clean_up_done:
|
|
break;
|
|
case sdma_event_e40_sw_cleaned:
|
|
sdma_sw_tear_down(sde);
|
|
break;
|
|
case sdma_event_e50_hw_cleaned:
|
|
break;
|
|
case sdma_event_e60_hw_halted:
|
|
break;
|
|
case sdma_event_e70_go_idle:
|
|
break;
|
|
case sdma_event_e80_hw_freeze:
|
|
break;
|
|
case sdma_event_e81_hw_frozen:
|
|
break;
|
|
case sdma_event_e82_hw_unfreeze:
|
|
break;
|
|
case sdma_event_e85_link_down:
|
|
break;
|
|
case sdma_event_e90_sw_halted:
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case sdma_state_s10_hw_start_up_halt_wait:
|
|
switch (event) {
|
|
case sdma_event_e00_go_hw_down:
|
|
sdma_set_state(sde, sdma_state_s00_hw_down);
|
|
sdma_sw_tear_down(sde);
|
|
break;
|
|
case sdma_event_e10_go_hw_start:
|
|
break;
|
|
case sdma_event_e15_hw_halt_done:
|
|
sdma_set_state(sde,
|
|
sdma_state_s15_hw_start_up_clean_wait);
|
|
sdma_start_hw_clean_up(sde);
|
|
break;
|
|
case sdma_event_e25_hw_clean_up_done:
|
|
break;
|
|
case sdma_event_e30_go_running:
|
|
ss->go_s99_running = 1;
|
|
break;
|
|
case sdma_event_e40_sw_cleaned:
|
|
break;
|
|
case sdma_event_e50_hw_cleaned:
|
|
break;
|
|
case sdma_event_e60_hw_halted:
|
|
schedule_work(&sde->err_halt_worker);
|
|
break;
|
|
case sdma_event_e70_go_idle:
|
|
ss->go_s99_running = 0;
|
|
break;
|
|
case sdma_event_e80_hw_freeze:
|
|
break;
|
|
case sdma_event_e81_hw_frozen:
|
|
break;
|
|
case sdma_event_e82_hw_unfreeze:
|
|
break;
|
|
case sdma_event_e85_link_down:
|
|
break;
|
|
case sdma_event_e90_sw_halted:
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case sdma_state_s15_hw_start_up_clean_wait:
|
|
switch (event) {
|
|
case sdma_event_e00_go_hw_down:
|
|
sdma_set_state(sde, sdma_state_s00_hw_down);
|
|
sdma_sw_tear_down(sde);
|
|
break;
|
|
case sdma_event_e10_go_hw_start:
|
|
break;
|
|
case sdma_event_e15_hw_halt_done:
|
|
break;
|
|
case sdma_event_e25_hw_clean_up_done:
|
|
sdma_hw_start_up(sde);
|
|
sdma_set_state(sde, ss->go_s99_running ?
|
|
sdma_state_s99_running :
|
|
sdma_state_s20_idle);
|
|
break;
|
|
case sdma_event_e30_go_running:
|
|
ss->go_s99_running = 1;
|
|
break;
|
|
case sdma_event_e40_sw_cleaned:
|
|
break;
|
|
case sdma_event_e50_hw_cleaned:
|
|
break;
|
|
case sdma_event_e60_hw_halted:
|
|
break;
|
|
case sdma_event_e70_go_idle:
|
|
ss->go_s99_running = 0;
|
|
break;
|
|
case sdma_event_e80_hw_freeze:
|
|
break;
|
|
case sdma_event_e81_hw_frozen:
|
|
break;
|
|
case sdma_event_e82_hw_unfreeze:
|
|
break;
|
|
case sdma_event_e85_link_down:
|
|
break;
|
|
case sdma_event_e90_sw_halted:
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case sdma_state_s20_idle:
|
|
switch (event) {
|
|
case sdma_event_e00_go_hw_down:
|
|
sdma_set_state(sde, sdma_state_s00_hw_down);
|
|
sdma_sw_tear_down(sde);
|
|
break;
|
|
case sdma_event_e10_go_hw_start:
|
|
break;
|
|
case sdma_event_e15_hw_halt_done:
|
|
break;
|
|
case sdma_event_e25_hw_clean_up_done:
|
|
break;
|
|
case sdma_event_e30_go_running:
|
|
sdma_set_state(sde, sdma_state_s99_running);
|
|
ss->go_s99_running = 1;
|
|
break;
|
|
case sdma_event_e40_sw_cleaned:
|
|
break;
|
|
case sdma_event_e50_hw_cleaned:
|
|
break;
|
|
case sdma_event_e60_hw_halted:
|
|
sdma_set_state(sde, sdma_state_s50_hw_halt_wait);
|
|
schedule_work(&sde->err_halt_worker);
|
|
break;
|
|
case sdma_event_e70_go_idle:
|
|
break;
|
|
case sdma_event_e85_link_down:
|
|
/* fall through */
|
|
case sdma_event_e80_hw_freeze:
|
|
sdma_set_state(sde, sdma_state_s80_hw_freeze);
|
|
atomic_dec(&sde->dd->sdma_unfreeze_count);
|
|
wake_up_interruptible(&sde->dd->sdma_unfreeze_wq);
|
|
break;
|
|
case sdma_event_e81_hw_frozen:
|
|
break;
|
|
case sdma_event_e82_hw_unfreeze:
|
|
break;
|
|
case sdma_event_e90_sw_halted:
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case sdma_state_s30_sw_clean_up_wait:
|
|
switch (event) {
|
|
case sdma_event_e00_go_hw_down:
|
|
sdma_set_state(sde, sdma_state_s00_hw_down);
|
|
break;
|
|
case sdma_event_e10_go_hw_start:
|
|
break;
|
|
case sdma_event_e15_hw_halt_done:
|
|
break;
|
|
case sdma_event_e25_hw_clean_up_done:
|
|
break;
|
|
case sdma_event_e30_go_running:
|
|
ss->go_s99_running = 1;
|
|
break;
|
|
case sdma_event_e40_sw_cleaned:
|
|
sdma_set_state(sde, sdma_state_s40_hw_clean_up_wait);
|
|
sdma_start_hw_clean_up(sde);
|
|
break;
|
|
case sdma_event_e50_hw_cleaned:
|
|
break;
|
|
case sdma_event_e60_hw_halted:
|
|
break;
|
|
case sdma_event_e70_go_idle:
|
|
ss->go_s99_running = 0;
|
|
break;
|
|
case sdma_event_e80_hw_freeze:
|
|
break;
|
|
case sdma_event_e81_hw_frozen:
|
|
break;
|
|
case sdma_event_e82_hw_unfreeze:
|
|
break;
|
|
case sdma_event_e85_link_down:
|
|
ss->go_s99_running = 0;
|
|
break;
|
|
case sdma_event_e90_sw_halted:
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case sdma_state_s40_hw_clean_up_wait:
|
|
switch (event) {
|
|
case sdma_event_e00_go_hw_down:
|
|
sdma_set_state(sde, sdma_state_s00_hw_down);
|
|
tasklet_hi_schedule(&sde->sdma_sw_clean_up_task);
|
|
break;
|
|
case sdma_event_e10_go_hw_start:
|
|
break;
|
|
case sdma_event_e15_hw_halt_done:
|
|
break;
|
|
case sdma_event_e25_hw_clean_up_done:
|
|
sdma_hw_start_up(sde);
|
|
sdma_set_state(sde, ss->go_s99_running ?
|
|
sdma_state_s99_running :
|
|
sdma_state_s20_idle);
|
|
break;
|
|
case sdma_event_e30_go_running:
|
|
ss->go_s99_running = 1;
|
|
break;
|
|
case sdma_event_e40_sw_cleaned:
|
|
break;
|
|
case sdma_event_e50_hw_cleaned:
|
|
break;
|
|
case sdma_event_e60_hw_halted:
|
|
break;
|
|
case sdma_event_e70_go_idle:
|
|
ss->go_s99_running = 0;
|
|
break;
|
|
case sdma_event_e80_hw_freeze:
|
|
break;
|
|
case sdma_event_e81_hw_frozen:
|
|
break;
|
|
case sdma_event_e82_hw_unfreeze:
|
|
break;
|
|
case sdma_event_e85_link_down:
|
|
ss->go_s99_running = 0;
|
|
break;
|
|
case sdma_event_e90_sw_halted:
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case sdma_state_s50_hw_halt_wait:
|
|
switch (event) {
|
|
case sdma_event_e00_go_hw_down:
|
|
sdma_set_state(sde, sdma_state_s00_hw_down);
|
|
tasklet_hi_schedule(&sde->sdma_sw_clean_up_task);
|
|
break;
|
|
case sdma_event_e10_go_hw_start:
|
|
break;
|
|
case sdma_event_e15_hw_halt_done:
|
|
sdma_set_state(sde, sdma_state_s30_sw_clean_up_wait);
|
|
tasklet_hi_schedule(&sde->sdma_sw_clean_up_task);
|
|
break;
|
|
case sdma_event_e25_hw_clean_up_done:
|
|
break;
|
|
case sdma_event_e30_go_running:
|
|
ss->go_s99_running = 1;
|
|
break;
|
|
case sdma_event_e40_sw_cleaned:
|
|
break;
|
|
case sdma_event_e50_hw_cleaned:
|
|
break;
|
|
case sdma_event_e60_hw_halted:
|
|
schedule_work(&sde->err_halt_worker);
|
|
break;
|
|
case sdma_event_e70_go_idle:
|
|
ss->go_s99_running = 0;
|
|
break;
|
|
case sdma_event_e80_hw_freeze:
|
|
break;
|
|
case sdma_event_e81_hw_frozen:
|
|
break;
|
|
case sdma_event_e82_hw_unfreeze:
|
|
break;
|
|
case sdma_event_e85_link_down:
|
|
ss->go_s99_running = 0;
|
|
break;
|
|
case sdma_event_e90_sw_halted:
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case sdma_state_s60_idle_halt_wait:
|
|
switch (event) {
|
|
case sdma_event_e00_go_hw_down:
|
|
sdma_set_state(sde, sdma_state_s00_hw_down);
|
|
tasklet_hi_schedule(&sde->sdma_sw_clean_up_task);
|
|
break;
|
|
case sdma_event_e10_go_hw_start:
|
|
break;
|
|
case sdma_event_e15_hw_halt_done:
|
|
sdma_set_state(sde, sdma_state_s30_sw_clean_up_wait);
|
|
tasklet_hi_schedule(&sde->sdma_sw_clean_up_task);
|
|
break;
|
|
case sdma_event_e25_hw_clean_up_done:
|
|
break;
|
|
case sdma_event_e30_go_running:
|
|
ss->go_s99_running = 1;
|
|
break;
|
|
case sdma_event_e40_sw_cleaned:
|
|
break;
|
|
case sdma_event_e50_hw_cleaned:
|
|
break;
|
|
case sdma_event_e60_hw_halted:
|
|
schedule_work(&sde->err_halt_worker);
|
|
break;
|
|
case sdma_event_e70_go_idle:
|
|
ss->go_s99_running = 0;
|
|
break;
|
|
case sdma_event_e80_hw_freeze:
|
|
break;
|
|
case sdma_event_e81_hw_frozen:
|
|
break;
|
|
case sdma_event_e82_hw_unfreeze:
|
|
break;
|
|
case sdma_event_e85_link_down:
|
|
break;
|
|
case sdma_event_e90_sw_halted:
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case sdma_state_s80_hw_freeze:
|
|
switch (event) {
|
|
case sdma_event_e00_go_hw_down:
|
|
sdma_set_state(sde, sdma_state_s00_hw_down);
|
|
tasklet_hi_schedule(&sde->sdma_sw_clean_up_task);
|
|
break;
|
|
case sdma_event_e10_go_hw_start:
|
|
break;
|
|
case sdma_event_e15_hw_halt_done:
|
|
break;
|
|
case sdma_event_e25_hw_clean_up_done:
|
|
break;
|
|
case sdma_event_e30_go_running:
|
|
ss->go_s99_running = 1;
|
|
break;
|
|
case sdma_event_e40_sw_cleaned:
|
|
break;
|
|
case sdma_event_e50_hw_cleaned:
|
|
break;
|
|
case sdma_event_e60_hw_halted:
|
|
break;
|
|
case sdma_event_e70_go_idle:
|
|
ss->go_s99_running = 0;
|
|
break;
|
|
case sdma_event_e80_hw_freeze:
|
|
break;
|
|
case sdma_event_e81_hw_frozen:
|
|
sdma_set_state(sde, sdma_state_s82_freeze_sw_clean);
|
|
tasklet_hi_schedule(&sde->sdma_sw_clean_up_task);
|
|
break;
|
|
case sdma_event_e82_hw_unfreeze:
|
|
break;
|
|
case sdma_event_e85_link_down:
|
|
break;
|
|
case sdma_event_e90_sw_halted:
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case sdma_state_s82_freeze_sw_clean:
|
|
switch (event) {
|
|
case sdma_event_e00_go_hw_down:
|
|
sdma_set_state(sde, sdma_state_s00_hw_down);
|
|
tasklet_hi_schedule(&sde->sdma_sw_clean_up_task);
|
|
break;
|
|
case sdma_event_e10_go_hw_start:
|
|
break;
|
|
case sdma_event_e15_hw_halt_done:
|
|
break;
|
|
case sdma_event_e25_hw_clean_up_done:
|
|
break;
|
|
case sdma_event_e30_go_running:
|
|
ss->go_s99_running = 1;
|
|
break;
|
|
case sdma_event_e40_sw_cleaned:
|
|
/* notify caller this engine is done cleaning */
|
|
atomic_dec(&sde->dd->sdma_unfreeze_count);
|
|
wake_up_interruptible(&sde->dd->sdma_unfreeze_wq);
|
|
break;
|
|
case sdma_event_e50_hw_cleaned:
|
|
break;
|
|
case sdma_event_e60_hw_halted:
|
|
break;
|
|
case sdma_event_e70_go_idle:
|
|
ss->go_s99_running = 0;
|
|
break;
|
|
case sdma_event_e80_hw_freeze:
|
|
break;
|
|
case sdma_event_e81_hw_frozen:
|
|
break;
|
|
case sdma_event_e82_hw_unfreeze:
|
|
sdma_hw_start_up(sde);
|
|
sdma_set_state(sde, ss->go_s99_running ?
|
|
sdma_state_s99_running :
|
|
sdma_state_s20_idle);
|
|
break;
|
|
case sdma_event_e85_link_down:
|
|
break;
|
|
case sdma_event_e90_sw_halted:
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case sdma_state_s99_running:
|
|
switch (event) {
|
|
case sdma_event_e00_go_hw_down:
|
|
sdma_set_state(sde, sdma_state_s00_hw_down);
|
|
tasklet_hi_schedule(&sde->sdma_sw_clean_up_task);
|
|
break;
|
|
case sdma_event_e10_go_hw_start:
|
|
break;
|
|
case sdma_event_e15_hw_halt_done:
|
|
break;
|
|
case sdma_event_e25_hw_clean_up_done:
|
|
break;
|
|
case sdma_event_e30_go_running:
|
|
break;
|
|
case sdma_event_e40_sw_cleaned:
|
|
break;
|
|
case sdma_event_e50_hw_cleaned:
|
|
break;
|
|
case sdma_event_e60_hw_halted:
|
|
need_progress = 1;
|
|
sdma_err_progress_check_schedule(sde);
|
|
case sdma_event_e90_sw_halted:
|
|
/*
|
|
* SW initiated halt does not perform engines
|
|
* progress check
|
|
*/
|
|
sdma_set_state(sde, sdma_state_s50_hw_halt_wait);
|
|
schedule_work(&sde->err_halt_worker);
|
|
break;
|
|
case sdma_event_e70_go_idle:
|
|
sdma_set_state(sde, sdma_state_s60_idle_halt_wait);
|
|
break;
|
|
case sdma_event_e85_link_down:
|
|
ss->go_s99_running = 0;
|
|
/* fall through */
|
|
case sdma_event_e80_hw_freeze:
|
|
sdma_set_state(sde, sdma_state_s80_hw_freeze);
|
|
atomic_dec(&sde->dd->sdma_unfreeze_count);
|
|
wake_up_interruptible(&sde->dd->sdma_unfreeze_wq);
|
|
break;
|
|
case sdma_event_e81_hw_frozen:
|
|
break;
|
|
case sdma_event_e82_hw_unfreeze:
|
|
break;
|
|
}
|
|
break;
|
|
}
|
|
|
|
ss->last_event = event;
|
|
if (need_progress)
|
|
sdma_make_progress(sde, 0);
|
|
}
|
|
|
|
/*
|
|
* _extend_sdma_tx_descs() - helper to extend txreq
|
|
*
|
|
* This is called once the initial nominal allocation
|
|
* of descriptors in the sdma_txreq is exhausted.
|
|
*
|
|
* The code will bump the allocation up to the max
|
|
* of MAX_DESC (64) descriptors. There doesn't seem
|
|
* much point in an interim step. The last descriptor
|
|
* is reserved for coalesce buffer in order to support
|
|
* cases where input packet has >MAX_DESC iovecs.
|
|
*
|
|
*/
|
|
static int _extend_sdma_tx_descs(struct hfi1_devdata *dd, struct sdma_txreq *tx)
|
|
{
|
|
int i;
|
|
|
|
/* Handle last descriptor */
|
|
if (unlikely((tx->num_desc == (MAX_DESC - 1)))) {
|
|
/* if tlen is 0, it is for padding, release last descriptor */
|
|
if (!tx->tlen) {
|
|
tx->desc_limit = MAX_DESC;
|
|
} else if (!tx->coalesce_buf) {
|
|
/* allocate coalesce buffer with space for padding */
|
|
tx->coalesce_buf = kmalloc(tx->tlen + sizeof(u32),
|
|
GFP_ATOMIC);
|
|
if (!tx->coalesce_buf)
|
|
goto enomem;
|
|
tx->coalesce_idx = 0;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
if (unlikely(tx->num_desc == MAX_DESC))
|
|
goto enomem;
|
|
|
|
tx->descp = kmalloc_array(
|
|
MAX_DESC,
|
|
sizeof(struct sdma_desc),
|
|
GFP_ATOMIC);
|
|
if (!tx->descp)
|
|
goto enomem;
|
|
|
|
/* reserve last descriptor for coalescing */
|
|
tx->desc_limit = MAX_DESC - 1;
|
|
/* copy ones already built */
|
|
for (i = 0; i < tx->num_desc; i++)
|
|
tx->descp[i] = tx->descs[i];
|
|
return 0;
|
|
enomem:
|
|
sdma_txclean(dd, tx);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/*
|
|
* ext_coal_sdma_tx_descs() - extend or coalesce sdma tx descriptors
|
|
*
|
|
* This is called once the initial nominal allocation of descriptors
|
|
* in the sdma_txreq is exhausted.
|
|
*
|
|
* This function calls _extend_sdma_tx_descs to extend or allocate
|
|
* coalesce buffer. If there is a allocated coalesce buffer, it will
|
|
* copy the input packet data into the coalesce buffer. It also adds
|
|
* coalesce buffer descriptor once when whole packet is received.
|
|
*
|
|
* Return:
|
|
* <0 - error
|
|
* 0 - coalescing, don't populate descriptor
|
|
* 1 - continue with populating descriptor
|
|
*/
|
|
int ext_coal_sdma_tx_descs(struct hfi1_devdata *dd, struct sdma_txreq *tx,
|
|
int type, void *kvaddr, struct page *page,
|
|
unsigned long offset, u16 len)
|
|
{
|
|
int pad_len, rval;
|
|
dma_addr_t addr;
|
|
|
|
rval = _extend_sdma_tx_descs(dd, tx);
|
|
if (rval) {
|
|
sdma_txclean(dd, tx);
|
|
return rval;
|
|
}
|
|
|
|
/* If coalesce buffer is allocated, copy data into it */
|
|
if (tx->coalesce_buf) {
|
|
if (type == SDMA_MAP_NONE) {
|
|
sdma_txclean(dd, tx);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (type == SDMA_MAP_PAGE) {
|
|
kvaddr = kmap(page);
|
|
kvaddr += offset;
|
|
} else if (WARN_ON(!kvaddr)) {
|
|
sdma_txclean(dd, tx);
|
|
return -EINVAL;
|
|
}
|
|
|
|
memcpy(tx->coalesce_buf + tx->coalesce_idx, kvaddr, len);
|
|
tx->coalesce_idx += len;
|
|
if (type == SDMA_MAP_PAGE)
|
|
kunmap(page);
|
|
|
|
/* If there is more data, return */
|
|
if (tx->tlen - tx->coalesce_idx)
|
|
return 0;
|
|
|
|
/* Whole packet is received; add any padding */
|
|
pad_len = tx->packet_len & (sizeof(u32) - 1);
|
|
if (pad_len) {
|
|
pad_len = sizeof(u32) - pad_len;
|
|
memset(tx->coalesce_buf + tx->coalesce_idx, 0, pad_len);
|
|
/* padding is taken care of for coalescing case */
|
|
tx->packet_len += pad_len;
|
|
tx->tlen += pad_len;
|
|
}
|
|
|
|
/* dma map the coalesce buffer */
|
|
addr = dma_map_single(&dd->pcidev->dev,
|
|
tx->coalesce_buf,
|
|
tx->tlen,
|
|
DMA_TO_DEVICE);
|
|
|
|
if (unlikely(dma_mapping_error(&dd->pcidev->dev, addr))) {
|
|
sdma_txclean(dd, tx);
|
|
return -ENOSPC;
|
|
}
|
|
|
|
/* Add descriptor for coalesce buffer */
|
|
tx->desc_limit = MAX_DESC;
|
|
return _sdma_txadd_daddr(dd, SDMA_MAP_SINGLE, tx,
|
|
addr, tx->tlen);
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
/* Update sdes when the lmc changes */
|
|
void sdma_update_lmc(struct hfi1_devdata *dd, u64 mask, u32 lid)
|
|
{
|
|
struct sdma_engine *sde;
|
|
int i;
|
|
u64 sreg;
|
|
|
|
sreg = ((mask & SD(CHECK_SLID_MASK_MASK)) <<
|
|
SD(CHECK_SLID_MASK_SHIFT)) |
|
|
(((lid & mask) & SD(CHECK_SLID_VALUE_MASK)) <<
|
|
SD(CHECK_SLID_VALUE_SHIFT));
|
|
|
|
for (i = 0; i < dd->num_sdma; i++) {
|
|
hfi1_cdbg(LINKVERB, "SendDmaEngine[%d].SLID_CHECK = 0x%x",
|
|
i, (u32)sreg);
|
|
sde = &dd->per_sdma[i];
|
|
write_sde_csr(sde, SD(CHECK_SLID), sreg);
|
|
}
|
|
}
|
|
|
|
/* tx not dword sized - pad */
|
|
int _pad_sdma_tx_descs(struct hfi1_devdata *dd, struct sdma_txreq *tx)
|
|
{
|
|
int rval = 0;
|
|
|
|
tx->num_desc++;
|
|
if ((unlikely(tx->num_desc == tx->desc_limit))) {
|
|
rval = _extend_sdma_tx_descs(dd, tx);
|
|
if (rval) {
|
|
sdma_txclean(dd, tx);
|
|
return rval;
|
|
}
|
|
}
|
|
/* finish the one just added */
|
|
make_tx_sdma_desc(
|
|
tx,
|
|
SDMA_MAP_NONE,
|
|
dd->sdma_pad_phys,
|
|
sizeof(u32) - (tx->packet_len & (sizeof(u32) - 1)));
|
|
_sdma_close_tx(dd, tx);
|
|
return rval;
|
|
}
|
|
|
|
/*
|
|
* Add ahg to the sdma_txreq
|
|
*
|
|
* The logic will consume up to 3
|
|
* descriptors at the beginning of
|
|
* sdma_txreq.
|
|
*/
|
|
void _sdma_txreq_ahgadd(
|
|
struct sdma_txreq *tx,
|
|
u8 num_ahg,
|
|
u8 ahg_entry,
|
|
u32 *ahg,
|
|
u8 ahg_hlen)
|
|
{
|
|
u32 i, shift = 0, desc = 0;
|
|
u8 mode;
|
|
|
|
WARN_ON_ONCE(num_ahg > 9 || (ahg_hlen & 3) || ahg_hlen == 4);
|
|
/* compute mode */
|
|
if (num_ahg == 1)
|
|
mode = SDMA_AHG_APPLY_UPDATE1;
|
|
else if (num_ahg <= 5)
|
|
mode = SDMA_AHG_APPLY_UPDATE2;
|
|
else
|
|
mode = SDMA_AHG_APPLY_UPDATE3;
|
|
tx->num_desc++;
|
|
/* initialize to consumed descriptors to zero */
|
|
switch (mode) {
|
|
case SDMA_AHG_APPLY_UPDATE3:
|
|
tx->num_desc++;
|
|
tx->descs[2].qw[0] = 0;
|
|
tx->descs[2].qw[1] = 0;
|
|
/* FALLTHROUGH */
|
|
case SDMA_AHG_APPLY_UPDATE2:
|
|
tx->num_desc++;
|
|
tx->descs[1].qw[0] = 0;
|
|
tx->descs[1].qw[1] = 0;
|
|
break;
|
|
}
|
|
ahg_hlen >>= 2;
|
|
tx->descs[0].qw[1] |=
|
|
(((u64)ahg_entry & SDMA_DESC1_HEADER_INDEX_MASK)
|
|
<< SDMA_DESC1_HEADER_INDEX_SHIFT) |
|
|
(((u64)ahg_hlen & SDMA_DESC1_HEADER_DWS_MASK)
|
|
<< SDMA_DESC1_HEADER_DWS_SHIFT) |
|
|
(((u64)mode & SDMA_DESC1_HEADER_MODE_MASK)
|
|
<< SDMA_DESC1_HEADER_MODE_SHIFT) |
|
|
(((u64)ahg[0] & SDMA_DESC1_HEADER_UPDATE1_MASK)
|
|
<< SDMA_DESC1_HEADER_UPDATE1_SHIFT);
|
|
for (i = 0; i < (num_ahg - 1); i++) {
|
|
if (!shift && !(i & 2))
|
|
desc++;
|
|
tx->descs[desc].qw[!!(i & 2)] |=
|
|
(((u64)ahg[i + 1])
|
|
<< shift);
|
|
shift = (shift + 32) & 63;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* sdma_ahg_alloc - allocate an AHG entry
|
|
* @sde: engine to allocate from
|
|
*
|
|
* Return:
|
|
* 0-31 when successful, -EOPNOTSUPP if AHG is not enabled,
|
|
* -ENOSPC if an entry is not available
|
|
*/
|
|
int sdma_ahg_alloc(struct sdma_engine *sde)
|
|
{
|
|
int nr;
|
|
int oldbit;
|
|
|
|
if (!sde) {
|
|
trace_hfi1_ahg_allocate(sde, -EINVAL);
|
|
return -EINVAL;
|
|
}
|
|
while (1) {
|
|
nr = ffz(ACCESS_ONCE(sde->ahg_bits));
|
|
if (nr > 31) {
|
|
trace_hfi1_ahg_allocate(sde, -ENOSPC);
|
|
return -ENOSPC;
|
|
}
|
|
oldbit = test_and_set_bit(nr, &sde->ahg_bits);
|
|
if (!oldbit)
|
|
break;
|
|
cpu_relax();
|
|
}
|
|
trace_hfi1_ahg_allocate(sde, nr);
|
|
return nr;
|
|
}
|
|
|
|
/**
|
|
* sdma_ahg_free - free an AHG entry
|
|
* @sde: engine to return AHG entry
|
|
* @ahg_index: index to free
|
|
*
|
|
* This routine frees the indicate AHG entry.
|
|
*/
|
|
void sdma_ahg_free(struct sdma_engine *sde, int ahg_index)
|
|
{
|
|
if (!sde)
|
|
return;
|
|
trace_hfi1_ahg_deallocate(sde, ahg_index);
|
|
if (ahg_index < 0 || ahg_index > 31)
|
|
return;
|
|
clear_bit(ahg_index, &sde->ahg_bits);
|
|
}
|
|
|
|
/*
|
|
* SPC freeze handling for SDMA engines. Called when the driver knows
|
|
* the SPC is going into a freeze but before the freeze is fully
|
|
* settled. Generally an error interrupt.
|
|
*
|
|
* This event will pull the engine out of running so no more entries can be
|
|
* added to the engine's queue.
|
|
*/
|
|
void sdma_freeze_notify(struct hfi1_devdata *dd, int link_down)
|
|
{
|
|
int i;
|
|
enum sdma_events event = link_down ? sdma_event_e85_link_down :
|
|
sdma_event_e80_hw_freeze;
|
|
|
|
/* set up the wait but do not wait here */
|
|
atomic_set(&dd->sdma_unfreeze_count, dd->num_sdma);
|
|
|
|
/* tell all engines to stop running and wait */
|
|
for (i = 0; i < dd->num_sdma; i++)
|
|
sdma_process_event(&dd->per_sdma[i], event);
|
|
|
|
/* sdma_freeze() will wait for all engines to have stopped */
|
|
}
|
|
|
|
/*
|
|
* SPC freeze handling for SDMA engines. Called when the driver knows
|
|
* the SPC is fully frozen.
|
|
*/
|
|
void sdma_freeze(struct hfi1_devdata *dd)
|
|
{
|
|
int i;
|
|
int ret;
|
|
|
|
/*
|
|
* Make sure all engines have moved out of the running state before
|
|
* continuing.
|
|
*/
|
|
ret = wait_event_interruptible(dd->sdma_unfreeze_wq,
|
|
atomic_read(&dd->sdma_unfreeze_count) <=
|
|
0);
|
|
/* interrupted or count is negative, then unloading - just exit */
|
|
if (ret || atomic_read(&dd->sdma_unfreeze_count) < 0)
|
|
return;
|
|
|
|
/* set up the count for the next wait */
|
|
atomic_set(&dd->sdma_unfreeze_count, dd->num_sdma);
|
|
|
|
/* tell all engines that the SPC is frozen, they can start cleaning */
|
|
for (i = 0; i < dd->num_sdma; i++)
|
|
sdma_process_event(&dd->per_sdma[i], sdma_event_e81_hw_frozen);
|
|
|
|
/*
|
|
* Wait for everyone to finish software clean before exiting. The
|
|
* software clean will read engine CSRs, so must be completed before
|
|
* the next step, which will clear the engine CSRs.
|
|
*/
|
|
(void)wait_event_interruptible(dd->sdma_unfreeze_wq,
|
|
atomic_read(&dd->sdma_unfreeze_count) <= 0);
|
|
/* no need to check results - done no matter what */
|
|
}
|
|
|
|
/*
|
|
* SPC freeze handling for the SDMA engines. Called after the SPC is unfrozen.
|
|
*
|
|
* The SPC freeze acts like a SDMA halt and a hardware clean combined. All
|
|
* that is left is a software clean. We could do it after the SPC is fully
|
|
* frozen, but then we'd have to add another state to wait for the unfreeze.
|
|
* Instead, just defer the software clean until the unfreeze step.
|
|
*/
|
|
void sdma_unfreeze(struct hfi1_devdata *dd)
|
|
{
|
|
int i;
|
|
|
|
/* tell all engines start freeze clean up */
|
|
for (i = 0; i < dd->num_sdma; i++)
|
|
sdma_process_event(&dd->per_sdma[i],
|
|
sdma_event_e82_hw_unfreeze);
|
|
}
|
|
|
|
/**
|
|
* _sdma_engine_progress_schedule() - schedule progress on engine
|
|
* @sde: sdma_engine to schedule progress
|
|
*
|
|
*/
|
|
void _sdma_engine_progress_schedule(
|
|
struct sdma_engine *sde)
|
|
{
|
|
trace_hfi1_sdma_engine_progress(sde, sde->progress_mask);
|
|
/* assume we have selected a good cpu */
|
|
write_csr(sde->dd,
|
|
CCE_INT_FORCE + (8 * (IS_SDMA_START / 64)),
|
|
sde->progress_mask);
|
|
}
|