forked from Minki/linux
a8adb83208
Miscellaneous Small Fixes - part 2 - Fix ndlp left in PLOGI state after link up - Fix cannot rcv unsol ELS frames after running HBA resets for a few minutes - Fix HBQ buffer_count implemention - Fix RPI leak - Fix crash while deleting vports while HBA is reset - Revert the FCP Fbits offset back to 7 - Fix panic when deleting vports - Remove unused code in switch statement outside of a case - Reject PLOGI from invalid PName or NName of 0 - Ignore PLOGI responses from WWPName or WWNName of 0 - Fix debugfs hbqinfo display for ppc - Added 8G to list of supported speeds for sysfs parameter - Defer ndlp cleanup to dev-loss timeout handler - Added support for WRITE_VPARMS mailbox command by applications Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
4054 lines
104 KiB
C
4054 lines
104 KiB
C
/*******************************************************************
|
|
* This file is part of the Emulex Linux Device Driver for *
|
|
* Fibre Channel Host Bus Adapters. *
|
|
* Copyright (C) 2004-2007 Emulex. All rights reserved. *
|
|
* EMULEX and SLI are trademarks of Emulex. *
|
|
* www.emulex.com *
|
|
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
|
|
* *
|
|
* This program is free software; you can redistribute it and/or *
|
|
* modify it under the terms of version 2 of the GNU General *
|
|
* Public License as published by the Free Software Foundation. *
|
|
* This program is distributed in the hope that it will be useful. *
|
|
* ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
|
|
* WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
|
|
* FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
|
|
* DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
|
|
* TO BE LEGALLY INVALID. See the GNU General Public License for *
|
|
* more details, a copy of which can be found in the file COPYING *
|
|
* included with this package. *
|
|
*******************************************************************/
|
|
|
|
#include <linux/blkdev.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <scsi/scsi.h>
|
|
#include <scsi/scsi_cmnd.h>
|
|
#include <scsi/scsi_device.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <scsi/scsi_transport_fc.h>
|
|
|
|
#include "lpfc_hw.h"
|
|
#include "lpfc_sli.h"
|
|
#include "lpfc_disc.h"
|
|
#include "lpfc_scsi.h"
|
|
#include "lpfc.h"
|
|
#include "lpfc_crtn.h"
|
|
#include "lpfc_logmsg.h"
|
|
#include "lpfc_compat.h"
|
|
#include "lpfc_debugfs.h"
|
|
|
|
/*
|
|
* Define macro to log: Mailbox command x%x cannot issue Data
|
|
* This allows multiple uses of lpfc_msgBlk0311
|
|
* w/o perturbing log msg utility.
|
|
*/
|
|
#define LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag) \
|
|
lpfc_printf_log(phba, \
|
|
KERN_INFO, \
|
|
LOG_MBOX | LOG_SLI, \
|
|
"(%d):0311 Mailbox command x%x cannot " \
|
|
"issue Data: x%x x%x x%x\n", \
|
|
pmbox->vport ? pmbox->vport->vpi : 0, \
|
|
pmbox->mb.mbxCommand, \
|
|
phba->pport->port_state, \
|
|
psli->sli_flag, \
|
|
flag)
|
|
|
|
|
|
/* There are only four IOCB completion types. */
|
|
typedef enum _lpfc_iocb_type {
|
|
LPFC_UNKNOWN_IOCB,
|
|
LPFC_UNSOL_IOCB,
|
|
LPFC_SOL_IOCB,
|
|
LPFC_ABORT_IOCB
|
|
} lpfc_iocb_type;
|
|
|
|
/* SLI-2/SLI-3 provide different sized iocbs. Given a pointer
|
|
* to the start of the ring, and the slot number of the
|
|
* desired iocb entry, calc a pointer to that entry.
|
|
*/
|
|
static inline IOCB_t *
|
|
lpfc_cmd_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
|
|
{
|
|
return (IOCB_t *) (((char *) pring->cmdringaddr) +
|
|
pring->cmdidx * phba->iocb_cmd_size);
|
|
}
|
|
|
|
static inline IOCB_t *
|
|
lpfc_resp_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
|
|
{
|
|
return (IOCB_t *) (((char *) pring->rspringaddr) +
|
|
pring->rspidx * phba->iocb_rsp_size);
|
|
}
|
|
|
|
static struct lpfc_iocbq *
|
|
__lpfc_sli_get_iocbq(struct lpfc_hba *phba)
|
|
{
|
|
struct list_head *lpfc_iocb_list = &phba->lpfc_iocb_list;
|
|
struct lpfc_iocbq * iocbq = NULL;
|
|
|
|
list_remove_head(lpfc_iocb_list, iocbq, struct lpfc_iocbq, list);
|
|
return iocbq;
|
|
}
|
|
|
|
struct lpfc_iocbq *
|
|
lpfc_sli_get_iocbq(struct lpfc_hba *phba)
|
|
{
|
|
struct lpfc_iocbq * iocbq = NULL;
|
|
unsigned long iflags;
|
|
|
|
spin_lock_irqsave(&phba->hbalock, iflags);
|
|
iocbq = __lpfc_sli_get_iocbq(phba);
|
|
spin_unlock_irqrestore(&phba->hbalock, iflags);
|
|
return iocbq;
|
|
}
|
|
|
|
void
|
|
__lpfc_sli_release_iocbq(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
|
|
{
|
|
size_t start_clean = offsetof(struct lpfc_iocbq, iocb);
|
|
|
|
/*
|
|
* Clean all volatile data fields, preserve iotag and node struct.
|
|
*/
|
|
memset((char*)iocbq + start_clean, 0, sizeof(*iocbq) - start_clean);
|
|
list_add_tail(&iocbq->list, &phba->lpfc_iocb_list);
|
|
}
|
|
|
|
void
|
|
lpfc_sli_release_iocbq(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
|
|
{
|
|
unsigned long iflags;
|
|
|
|
/*
|
|
* Clean all volatile data fields, preserve iotag and node struct.
|
|
*/
|
|
spin_lock_irqsave(&phba->hbalock, iflags);
|
|
__lpfc_sli_release_iocbq(phba, iocbq);
|
|
spin_unlock_irqrestore(&phba->hbalock, iflags);
|
|
}
|
|
|
|
/*
|
|
* Translate the iocb command to an iocb command type used to decide the final
|
|
* disposition of each completed IOCB.
|
|
*/
|
|
static lpfc_iocb_type
|
|
lpfc_sli_iocb_cmd_type(uint8_t iocb_cmnd)
|
|
{
|
|
lpfc_iocb_type type = LPFC_UNKNOWN_IOCB;
|
|
|
|
if (iocb_cmnd > CMD_MAX_IOCB_CMD)
|
|
return 0;
|
|
|
|
switch (iocb_cmnd) {
|
|
case CMD_XMIT_SEQUENCE_CR:
|
|
case CMD_XMIT_SEQUENCE_CX:
|
|
case CMD_XMIT_BCAST_CN:
|
|
case CMD_XMIT_BCAST_CX:
|
|
case CMD_ELS_REQUEST_CR:
|
|
case CMD_ELS_REQUEST_CX:
|
|
case CMD_CREATE_XRI_CR:
|
|
case CMD_CREATE_XRI_CX:
|
|
case CMD_GET_RPI_CN:
|
|
case CMD_XMIT_ELS_RSP_CX:
|
|
case CMD_GET_RPI_CR:
|
|
case CMD_FCP_IWRITE_CR:
|
|
case CMD_FCP_IWRITE_CX:
|
|
case CMD_FCP_IREAD_CR:
|
|
case CMD_FCP_IREAD_CX:
|
|
case CMD_FCP_ICMND_CR:
|
|
case CMD_FCP_ICMND_CX:
|
|
case CMD_FCP_TSEND_CX:
|
|
case CMD_FCP_TRSP_CX:
|
|
case CMD_FCP_TRECEIVE_CX:
|
|
case CMD_FCP_AUTO_TRSP_CX:
|
|
case CMD_ADAPTER_MSG:
|
|
case CMD_ADAPTER_DUMP:
|
|
case CMD_XMIT_SEQUENCE64_CR:
|
|
case CMD_XMIT_SEQUENCE64_CX:
|
|
case CMD_XMIT_BCAST64_CN:
|
|
case CMD_XMIT_BCAST64_CX:
|
|
case CMD_ELS_REQUEST64_CR:
|
|
case CMD_ELS_REQUEST64_CX:
|
|
case CMD_FCP_IWRITE64_CR:
|
|
case CMD_FCP_IWRITE64_CX:
|
|
case CMD_FCP_IREAD64_CR:
|
|
case CMD_FCP_IREAD64_CX:
|
|
case CMD_FCP_ICMND64_CR:
|
|
case CMD_FCP_ICMND64_CX:
|
|
case CMD_FCP_TSEND64_CX:
|
|
case CMD_FCP_TRSP64_CX:
|
|
case CMD_FCP_TRECEIVE64_CX:
|
|
case CMD_GEN_REQUEST64_CR:
|
|
case CMD_GEN_REQUEST64_CX:
|
|
case CMD_XMIT_ELS_RSP64_CX:
|
|
type = LPFC_SOL_IOCB;
|
|
break;
|
|
case CMD_ABORT_XRI_CN:
|
|
case CMD_ABORT_XRI_CX:
|
|
case CMD_CLOSE_XRI_CN:
|
|
case CMD_CLOSE_XRI_CX:
|
|
case CMD_XRI_ABORTED_CX:
|
|
case CMD_ABORT_MXRI64_CN:
|
|
type = LPFC_ABORT_IOCB;
|
|
break;
|
|
case CMD_RCV_SEQUENCE_CX:
|
|
case CMD_RCV_ELS_REQ_CX:
|
|
case CMD_RCV_SEQUENCE64_CX:
|
|
case CMD_RCV_ELS_REQ64_CX:
|
|
case CMD_ASYNC_STATUS:
|
|
case CMD_IOCB_RCV_SEQ64_CX:
|
|
case CMD_IOCB_RCV_ELS64_CX:
|
|
case CMD_IOCB_RCV_CONT64_CX:
|
|
type = LPFC_UNSOL_IOCB;
|
|
break;
|
|
default:
|
|
type = LPFC_UNKNOWN_IOCB;
|
|
break;
|
|
}
|
|
|
|
return type;
|
|
}
|
|
|
|
static int
|
|
lpfc_sli_ring_map(struct lpfc_hba *phba)
|
|
{
|
|
struct lpfc_sli *psli = &phba->sli;
|
|
LPFC_MBOXQ_t *pmb;
|
|
MAILBOX_t *pmbox;
|
|
int i, rc, ret = 0;
|
|
|
|
pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
|
|
if (!pmb)
|
|
return -ENOMEM;
|
|
pmbox = &pmb->mb;
|
|
phba->link_state = LPFC_INIT_MBX_CMDS;
|
|
for (i = 0; i < psli->num_rings; i++) {
|
|
lpfc_config_ring(phba, i, pmb);
|
|
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
|
|
if (rc != MBX_SUCCESS) {
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
|
|
"0446 Adapter failed to init (%d), "
|
|
"mbxCmd x%x CFG_RING, mbxStatus x%x, "
|
|
"ring %d\n",
|
|
rc, pmbox->mbxCommand,
|
|
pmbox->mbxStatus, i);
|
|
phba->link_state = LPFC_HBA_ERROR;
|
|
ret = -ENXIO;
|
|
break;
|
|
}
|
|
}
|
|
mempool_free(pmb, phba->mbox_mem_pool);
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
lpfc_sli_ringtxcmpl_put(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
|
|
struct lpfc_iocbq *piocb)
|
|
{
|
|
list_add_tail(&piocb->list, &pring->txcmplq);
|
|
pring->txcmplq_cnt++;
|
|
if ((unlikely(pring->ringno == LPFC_ELS_RING)) &&
|
|
(piocb->iocb.ulpCommand != CMD_ABORT_XRI_CN) &&
|
|
(piocb->iocb.ulpCommand != CMD_CLOSE_XRI_CN)) {
|
|
if (!piocb->vport)
|
|
BUG();
|
|
else
|
|
mod_timer(&piocb->vport->els_tmofunc,
|
|
jiffies + HZ * (phba->fc_ratov << 1));
|
|
}
|
|
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct lpfc_iocbq *
|
|
lpfc_sli_ringtx_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
|
|
{
|
|
struct lpfc_iocbq *cmd_iocb;
|
|
|
|
list_remove_head((&pring->txq), cmd_iocb, struct lpfc_iocbq, list);
|
|
if (cmd_iocb != NULL)
|
|
pring->txq_cnt--;
|
|
return cmd_iocb;
|
|
}
|
|
|
|
static IOCB_t *
|
|
lpfc_sli_next_iocb_slot (struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
|
|
{
|
|
struct lpfc_pgp *pgp = (phba->sli_rev == 3) ?
|
|
&phba->slim2p->mbx.us.s3_pgp.port[pring->ringno] :
|
|
&phba->slim2p->mbx.us.s2.port[pring->ringno];
|
|
uint32_t max_cmd_idx = pring->numCiocb;
|
|
|
|
if ((pring->next_cmdidx == pring->cmdidx) &&
|
|
(++pring->next_cmdidx >= max_cmd_idx))
|
|
pring->next_cmdidx = 0;
|
|
|
|
if (unlikely(pring->local_getidx == pring->next_cmdidx)) {
|
|
|
|
pring->local_getidx = le32_to_cpu(pgp->cmdGetInx);
|
|
|
|
if (unlikely(pring->local_getidx >= max_cmd_idx)) {
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
|
|
"0315 Ring %d issue: portCmdGet %d "
|
|
"is bigger then cmd ring %d\n",
|
|
pring->ringno,
|
|
pring->local_getidx, max_cmd_idx);
|
|
|
|
phba->link_state = LPFC_HBA_ERROR;
|
|
/*
|
|
* All error attention handlers are posted to
|
|
* worker thread
|
|
*/
|
|
phba->work_ha |= HA_ERATT;
|
|
phba->work_hs = HS_FFER3;
|
|
|
|
/* hbalock should already be held */
|
|
if (phba->work_wait)
|
|
lpfc_worker_wake_up(phba);
|
|
|
|
return NULL;
|
|
}
|
|
|
|
if (pring->local_getidx == pring->next_cmdidx)
|
|
return NULL;
|
|
}
|
|
|
|
return lpfc_cmd_iocb(phba, pring);
|
|
}
|
|
|
|
uint16_t
|
|
lpfc_sli_next_iotag(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
|
|
{
|
|
struct lpfc_iocbq **new_arr;
|
|
struct lpfc_iocbq **old_arr;
|
|
size_t new_len;
|
|
struct lpfc_sli *psli = &phba->sli;
|
|
uint16_t iotag;
|
|
|
|
spin_lock_irq(&phba->hbalock);
|
|
iotag = psli->last_iotag;
|
|
if(++iotag < psli->iocbq_lookup_len) {
|
|
psli->last_iotag = iotag;
|
|
psli->iocbq_lookup[iotag] = iocbq;
|
|
spin_unlock_irq(&phba->hbalock);
|
|
iocbq->iotag = iotag;
|
|
return iotag;
|
|
} else if (psli->iocbq_lookup_len < (0xffff
|
|
- LPFC_IOCBQ_LOOKUP_INCREMENT)) {
|
|
new_len = psli->iocbq_lookup_len + LPFC_IOCBQ_LOOKUP_INCREMENT;
|
|
spin_unlock_irq(&phba->hbalock);
|
|
new_arr = kzalloc(new_len * sizeof (struct lpfc_iocbq *),
|
|
GFP_KERNEL);
|
|
if (new_arr) {
|
|
spin_lock_irq(&phba->hbalock);
|
|
old_arr = psli->iocbq_lookup;
|
|
if (new_len <= psli->iocbq_lookup_len) {
|
|
/* highly unprobable case */
|
|
kfree(new_arr);
|
|
iotag = psli->last_iotag;
|
|
if(++iotag < psli->iocbq_lookup_len) {
|
|
psli->last_iotag = iotag;
|
|
psli->iocbq_lookup[iotag] = iocbq;
|
|
spin_unlock_irq(&phba->hbalock);
|
|
iocbq->iotag = iotag;
|
|
return iotag;
|
|
}
|
|
spin_unlock_irq(&phba->hbalock);
|
|
return 0;
|
|
}
|
|
if (psli->iocbq_lookup)
|
|
memcpy(new_arr, old_arr,
|
|
((psli->last_iotag + 1) *
|
|
sizeof (struct lpfc_iocbq *)));
|
|
psli->iocbq_lookup = new_arr;
|
|
psli->iocbq_lookup_len = new_len;
|
|
psli->last_iotag = iotag;
|
|
psli->iocbq_lookup[iotag] = iocbq;
|
|
spin_unlock_irq(&phba->hbalock);
|
|
iocbq->iotag = iotag;
|
|
kfree(old_arr);
|
|
return iotag;
|
|
}
|
|
} else
|
|
spin_unlock_irq(&phba->hbalock);
|
|
|
|
lpfc_printf_log(phba, KERN_ERR,LOG_SLI,
|
|
"0318 Failed to allocate IOTAG.last IOTAG is %d\n",
|
|
psli->last_iotag);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
lpfc_sli_submit_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
|
|
IOCB_t *iocb, struct lpfc_iocbq *nextiocb)
|
|
{
|
|
/*
|
|
* Set up an iotag
|
|
*/
|
|
nextiocb->iocb.ulpIoTag = (nextiocb->iocb_cmpl) ? nextiocb->iotag : 0;
|
|
|
|
if (pring->ringno == LPFC_ELS_RING) {
|
|
lpfc_debugfs_slow_ring_trc(phba,
|
|
"IOCB cmd ring: wd4:x%08x wd6:x%08x wd7:x%08x",
|
|
*(((uint32_t *) &nextiocb->iocb) + 4),
|
|
*(((uint32_t *) &nextiocb->iocb) + 6),
|
|
*(((uint32_t *) &nextiocb->iocb) + 7));
|
|
}
|
|
|
|
/*
|
|
* Issue iocb command to adapter
|
|
*/
|
|
lpfc_sli_pcimem_bcopy(&nextiocb->iocb, iocb, phba->iocb_cmd_size);
|
|
wmb();
|
|
pring->stats.iocb_cmd++;
|
|
|
|
/*
|
|
* If there is no completion routine to call, we can release the
|
|
* IOCB buffer back right now. For IOCBs, like QUE_RING_BUF,
|
|
* that have no rsp ring completion, iocb_cmpl MUST be NULL.
|
|
*/
|
|
if (nextiocb->iocb_cmpl)
|
|
lpfc_sli_ringtxcmpl_put(phba, pring, nextiocb);
|
|
else
|
|
__lpfc_sli_release_iocbq(phba, nextiocb);
|
|
|
|
/*
|
|
* Let the HBA know what IOCB slot will be the next one the
|
|
* driver will put a command into.
|
|
*/
|
|
pring->cmdidx = pring->next_cmdidx;
|
|
writel(pring->cmdidx, &phba->host_gp[pring->ringno].cmdPutInx);
|
|
}
|
|
|
|
static void
|
|
lpfc_sli_update_full_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
|
|
{
|
|
int ringno = pring->ringno;
|
|
|
|
pring->flag |= LPFC_CALL_RING_AVAILABLE;
|
|
|
|
wmb();
|
|
|
|
/*
|
|
* Set ring 'ringno' to SET R0CE_REQ in Chip Att register.
|
|
* The HBA will tell us when an IOCB entry is available.
|
|
*/
|
|
writel((CA_R0ATT|CA_R0CE_REQ) << (ringno*4), phba->CAregaddr);
|
|
readl(phba->CAregaddr); /* flush */
|
|
|
|
pring->stats.iocb_cmd_full++;
|
|
}
|
|
|
|
static void
|
|
lpfc_sli_update_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
|
|
{
|
|
int ringno = pring->ringno;
|
|
|
|
/*
|
|
* Tell the HBA that there is work to do in this ring.
|
|
*/
|
|
wmb();
|
|
writel(CA_R0ATT << (ringno * 4), phba->CAregaddr);
|
|
readl(phba->CAregaddr); /* flush */
|
|
}
|
|
|
|
static void
|
|
lpfc_sli_resume_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
|
|
{
|
|
IOCB_t *iocb;
|
|
struct lpfc_iocbq *nextiocb;
|
|
|
|
/*
|
|
* Check to see if:
|
|
* (a) there is anything on the txq to send
|
|
* (b) link is up
|
|
* (c) link attention events can be processed (fcp ring only)
|
|
* (d) IOCB processing is not blocked by the outstanding mbox command.
|
|
*/
|
|
if (pring->txq_cnt &&
|
|
lpfc_is_link_up(phba) &&
|
|
(pring->ringno != phba->sli.fcp_ring ||
|
|
phba->sli.sli_flag & LPFC_PROCESS_LA)) {
|
|
|
|
while ((iocb = lpfc_sli_next_iocb_slot(phba, pring)) &&
|
|
(nextiocb = lpfc_sli_ringtx_get(phba, pring)))
|
|
lpfc_sli_submit_iocb(phba, pring, iocb, nextiocb);
|
|
|
|
if (iocb)
|
|
lpfc_sli_update_ring(phba, pring);
|
|
else
|
|
lpfc_sli_update_full_ring(phba, pring);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
struct lpfc_hbq_entry *
|
|
lpfc_sli_next_hbq_slot(struct lpfc_hba *phba, uint32_t hbqno)
|
|
{
|
|
struct hbq_s *hbqp = &phba->hbqs[hbqno];
|
|
|
|
if (hbqp->next_hbqPutIdx == hbqp->hbqPutIdx &&
|
|
++hbqp->next_hbqPutIdx >= hbqp->entry_count)
|
|
hbqp->next_hbqPutIdx = 0;
|
|
|
|
if (unlikely(hbqp->local_hbqGetIdx == hbqp->next_hbqPutIdx)) {
|
|
uint32_t raw_index = phba->hbq_get[hbqno];
|
|
uint32_t getidx = le32_to_cpu(raw_index);
|
|
|
|
hbqp->local_hbqGetIdx = getidx;
|
|
|
|
if (unlikely(hbqp->local_hbqGetIdx >= hbqp->entry_count)) {
|
|
lpfc_printf_log(phba, KERN_ERR,
|
|
LOG_SLI | LOG_VPORT,
|
|
"1802 HBQ %d: local_hbqGetIdx "
|
|
"%u is > than hbqp->entry_count %u\n",
|
|
hbqno, hbqp->local_hbqGetIdx,
|
|
hbqp->entry_count);
|
|
|
|
phba->link_state = LPFC_HBA_ERROR;
|
|
return NULL;
|
|
}
|
|
|
|
if (hbqp->local_hbqGetIdx == hbqp->next_hbqPutIdx)
|
|
return NULL;
|
|
}
|
|
|
|
return (struct lpfc_hbq_entry *) phba->hbqs[hbqno].hbq_virt +
|
|
hbqp->hbqPutIdx;
|
|
}
|
|
|
|
void
|
|
lpfc_sli_hbqbuf_free_all(struct lpfc_hba *phba)
|
|
{
|
|
struct lpfc_dmabuf *dmabuf, *next_dmabuf;
|
|
struct hbq_dmabuf *hbq_buf;
|
|
int i, hbq_count;
|
|
|
|
hbq_count = lpfc_sli_hbq_count();
|
|
/* Return all memory used by all HBQs */
|
|
for (i = 0; i < hbq_count; ++i) {
|
|
list_for_each_entry_safe(dmabuf, next_dmabuf,
|
|
&phba->hbqs[i].hbq_buffer_list, list) {
|
|
hbq_buf = container_of(dmabuf, struct hbq_dmabuf, dbuf);
|
|
list_del(&hbq_buf->dbuf.list);
|
|
(phba->hbqs[i].hbq_free_buffer)(phba, hbq_buf);
|
|
}
|
|
phba->hbqs[i].buffer_count = 0;
|
|
}
|
|
}
|
|
|
|
static struct lpfc_hbq_entry *
|
|
lpfc_sli_hbq_to_firmware(struct lpfc_hba *phba, uint32_t hbqno,
|
|
struct hbq_dmabuf *hbq_buf)
|
|
{
|
|
struct lpfc_hbq_entry *hbqe;
|
|
dma_addr_t physaddr = hbq_buf->dbuf.phys;
|
|
|
|
/* Get next HBQ entry slot to use */
|
|
hbqe = lpfc_sli_next_hbq_slot(phba, hbqno);
|
|
if (hbqe) {
|
|
struct hbq_s *hbqp = &phba->hbqs[hbqno];
|
|
|
|
hbqe->bde.addrHigh = le32_to_cpu(putPaddrHigh(physaddr));
|
|
hbqe->bde.addrLow = le32_to_cpu(putPaddrLow(physaddr));
|
|
hbqe->bde.tus.f.bdeSize = hbq_buf->size;
|
|
hbqe->bde.tus.f.bdeFlags = 0;
|
|
hbqe->bde.tus.w = le32_to_cpu(hbqe->bde.tus.w);
|
|
hbqe->buffer_tag = le32_to_cpu(hbq_buf->tag);
|
|
/* Sync SLIM */
|
|
hbqp->hbqPutIdx = hbqp->next_hbqPutIdx;
|
|
writel(hbqp->hbqPutIdx, phba->hbq_put + hbqno);
|
|
/* flush */
|
|
readl(phba->hbq_put + hbqno);
|
|
list_add_tail(&hbq_buf->dbuf.list, &hbqp->hbq_buffer_list);
|
|
}
|
|
return hbqe;
|
|
}
|
|
|
|
static struct lpfc_hbq_init lpfc_els_hbq = {
|
|
.rn = 1,
|
|
.entry_count = 200,
|
|
.mask_count = 0,
|
|
.profile = 0,
|
|
.ring_mask = (1 << LPFC_ELS_RING),
|
|
.buffer_count = 0,
|
|
.init_count = 20,
|
|
.add_count = 5,
|
|
};
|
|
|
|
static struct lpfc_hbq_init lpfc_extra_hbq = {
|
|
.rn = 1,
|
|
.entry_count = 200,
|
|
.mask_count = 0,
|
|
.profile = 0,
|
|
.ring_mask = (1 << LPFC_EXTRA_RING),
|
|
.buffer_count = 0,
|
|
.init_count = 0,
|
|
.add_count = 5,
|
|
};
|
|
|
|
struct lpfc_hbq_init *lpfc_hbq_defs[] = {
|
|
&lpfc_els_hbq,
|
|
&lpfc_extra_hbq,
|
|
};
|
|
|
|
static int
|
|
lpfc_sli_hbqbuf_fill_hbqs(struct lpfc_hba *phba, uint32_t hbqno, uint32_t count)
|
|
{
|
|
uint32_t i, start, end;
|
|
struct hbq_dmabuf *hbq_buffer;
|
|
|
|
if (!phba->hbqs[hbqno].hbq_alloc_buffer) {
|
|
return 0;
|
|
}
|
|
|
|
start = phba->hbqs[hbqno].buffer_count;
|
|
end = count + start;
|
|
if (end > lpfc_hbq_defs[hbqno]->entry_count) {
|
|
end = lpfc_hbq_defs[hbqno]->entry_count;
|
|
}
|
|
|
|
/* Populate HBQ entries */
|
|
for (i = start; i < end; i++) {
|
|
hbq_buffer = (phba->hbqs[hbqno].hbq_alloc_buffer)(phba);
|
|
if (!hbq_buffer)
|
|
return 1;
|
|
hbq_buffer->tag = (i | (hbqno << 16));
|
|
if (lpfc_sli_hbq_to_firmware(phba, hbqno, hbq_buffer))
|
|
phba->hbqs[hbqno].buffer_count++;
|
|
else
|
|
(phba->hbqs[hbqno].hbq_free_buffer)(phba, hbq_buffer);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
lpfc_sli_hbqbuf_add_hbqs(struct lpfc_hba *phba, uint32_t qno)
|
|
{
|
|
return(lpfc_sli_hbqbuf_fill_hbqs(phba, qno,
|
|
lpfc_hbq_defs[qno]->add_count));
|
|
}
|
|
|
|
int
|
|
lpfc_sli_hbqbuf_init_hbqs(struct lpfc_hba *phba, uint32_t qno)
|
|
{
|
|
return(lpfc_sli_hbqbuf_fill_hbqs(phba, qno,
|
|
lpfc_hbq_defs[qno]->init_count));
|
|
}
|
|
|
|
struct hbq_dmabuf *
|
|
lpfc_sli_hbqbuf_find(struct lpfc_hba *phba, uint32_t tag)
|
|
{
|
|
struct lpfc_dmabuf *d_buf;
|
|
struct hbq_dmabuf *hbq_buf;
|
|
uint32_t hbqno;
|
|
|
|
hbqno = tag >> 16;
|
|
if (hbqno >= LPFC_MAX_HBQS)
|
|
return NULL;
|
|
|
|
list_for_each_entry(d_buf, &phba->hbqs[hbqno].hbq_buffer_list, list) {
|
|
hbq_buf = container_of(d_buf, struct hbq_dmabuf, dbuf);
|
|
if (hbq_buf->tag == tag) {
|
|
return hbq_buf;
|
|
}
|
|
}
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_SLI | LOG_VPORT,
|
|
"1803 Bad hbq tag. Data: x%x x%x\n",
|
|
tag, phba->hbqs[tag >> 16].buffer_count);
|
|
return NULL;
|
|
}
|
|
|
|
void
|
|
lpfc_sli_free_hbq(struct lpfc_hba *phba, struct hbq_dmabuf *hbq_buffer)
|
|
{
|
|
uint32_t hbqno;
|
|
|
|
if (hbq_buffer) {
|
|
hbqno = hbq_buffer->tag >> 16;
|
|
if (!lpfc_sli_hbq_to_firmware(phba, hbqno, hbq_buffer)) {
|
|
(phba->hbqs[hbqno].hbq_free_buffer)(phba, hbq_buffer);
|
|
}
|
|
}
|
|
}
|
|
|
|
static int
|
|
lpfc_sli_chk_mbx_command(uint8_t mbxCommand)
|
|
{
|
|
uint8_t ret;
|
|
|
|
switch (mbxCommand) {
|
|
case MBX_LOAD_SM:
|
|
case MBX_READ_NV:
|
|
case MBX_WRITE_NV:
|
|
case MBX_WRITE_VPARMS:
|
|
case MBX_RUN_BIU_DIAG:
|
|
case MBX_INIT_LINK:
|
|
case MBX_DOWN_LINK:
|
|
case MBX_CONFIG_LINK:
|
|
case MBX_CONFIG_RING:
|
|
case MBX_RESET_RING:
|
|
case MBX_READ_CONFIG:
|
|
case MBX_READ_RCONFIG:
|
|
case MBX_READ_SPARM:
|
|
case MBX_READ_STATUS:
|
|
case MBX_READ_RPI:
|
|
case MBX_READ_XRI:
|
|
case MBX_READ_REV:
|
|
case MBX_READ_LNK_STAT:
|
|
case MBX_REG_LOGIN:
|
|
case MBX_UNREG_LOGIN:
|
|
case MBX_READ_LA:
|
|
case MBX_CLEAR_LA:
|
|
case MBX_DUMP_MEMORY:
|
|
case MBX_DUMP_CONTEXT:
|
|
case MBX_RUN_DIAGS:
|
|
case MBX_RESTART:
|
|
case MBX_UPDATE_CFG:
|
|
case MBX_DOWN_LOAD:
|
|
case MBX_DEL_LD_ENTRY:
|
|
case MBX_RUN_PROGRAM:
|
|
case MBX_SET_MASK:
|
|
case MBX_SET_SLIM:
|
|
case MBX_UNREG_D_ID:
|
|
case MBX_KILL_BOARD:
|
|
case MBX_CONFIG_FARP:
|
|
case MBX_BEACON:
|
|
case MBX_LOAD_AREA:
|
|
case MBX_RUN_BIU_DIAG64:
|
|
case MBX_CONFIG_PORT:
|
|
case MBX_READ_SPARM64:
|
|
case MBX_READ_RPI64:
|
|
case MBX_REG_LOGIN64:
|
|
case MBX_READ_LA64:
|
|
case MBX_FLASH_WR_ULA:
|
|
case MBX_SET_DEBUG:
|
|
case MBX_LOAD_EXP_ROM:
|
|
case MBX_ASYNCEVT_ENABLE:
|
|
case MBX_REG_VPI:
|
|
case MBX_UNREG_VPI:
|
|
case MBX_HEARTBEAT:
|
|
ret = mbxCommand;
|
|
break;
|
|
default:
|
|
ret = MBX_SHUTDOWN;
|
|
break;
|
|
}
|
|
return ret;
|
|
}
|
|
static void
|
|
lpfc_sli_wake_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq)
|
|
{
|
|
wait_queue_head_t *pdone_q;
|
|
unsigned long drvr_flag;
|
|
|
|
/*
|
|
* If pdone_q is empty, the driver thread gave up waiting and
|
|
* continued running.
|
|
*/
|
|
pmboxq->mbox_flag |= LPFC_MBX_WAKE;
|
|
spin_lock_irqsave(&phba->hbalock, drvr_flag);
|
|
pdone_q = (wait_queue_head_t *) pmboxq->context1;
|
|
if (pdone_q)
|
|
wake_up_interruptible(pdone_q);
|
|
spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
|
|
return;
|
|
}
|
|
|
|
void
|
|
lpfc_sli_def_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
|
|
{
|
|
struct lpfc_dmabuf *mp;
|
|
uint16_t rpi;
|
|
int rc;
|
|
|
|
mp = (struct lpfc_dmabuf *) (pmb->context1);
|
|
|
|
if (mp) {
|
|
lpfc_mbuf_free(phba, mp->virt, mp->phys);
|
|
kfree(mp);
|
|
}
|
|
|
|
/*
|
|
* If a REG_LOGIN succeeded after node is destroyed or node
|
|
* is in re-discovery driver need to cleanup the RPI.
|
|
*/
|
|
if (!(phba->pport->load_flag & FC_UNLOADING) &&
|
|
pmb->mb.mbxCommand == MBX_REG_LOGIN64 &&
|
|
!pmb->mb.mbxStatus) {
|
|
|
|
rpi = pmb->mb.un.varWords[0];
|
|
lpfc_unreg_login(phba, pmb->mb.un.varRegLogin.vpi, rpi, pmb);
|
|
pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
|
|
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
|
|
if (rc != MBX_NOT_FINISHED)
|
|
return;
|
|
}
|
|
|
|
mempool_free(pmb, phba->mbox_mem_pool);
|
|
return;
|
|
}
|
|
|
|
int
|
|
lpfc_sli_handle_mb_event(struct lpfc_hba *phba)
|
|
{
|
|
MAILBOX_t *pmbox;
|
|
LPFC_MBOXQ_t *pmb;
|
|
int rc;
|
|
LIST_HEAD(cmplq);
|
|
|
|
phba->sli.slistat.mbox_event++;
|
|
|
|
/* Get all completed mailboxe buffers into the cmplq */
|
|
spin_lock_irq(&phba->hbalock);
|
|
list_splice_init(&phba->sli.mboxq_cmpl, &cmplq);
|
|
spin_unlock_irq(&phba->hbalock);
|
|
|
|
/* Get a Mailbox buffer to setup mailbox commands for callback */
|
|
do {
|
|
list_remove_head(&cmplq, pmb, LPFC_MBOXQ_t, list);
|
|
if (pmb == NULL)
|
|
break;
|
|
|
|
pmbox = &pmb->mb;
|
|
|
|
if (pmbox->mbxCommand != MBX_HEARTBEAT) {
|
|
if (pmb->vport) {
|
|
lpfc_debugfs_disc_trc(pmb->vport,
|
|
LPFC_DISC_TRC_MBOX_VPORT,
|
|
"MBOX cmpl vport: cmd:x%x mb:x%x x%x",
|
|
(uint32_t)pmbox->mbxCommand,
|
|
pmbox->un.varWords[0],
|
|
pmbox->un.varWords[1]);
|
|
}
|
|
else {
|
|
lpfc_debugfs_disc_trc(phba->pport,
|
|
LPFC_DISC_TRC_MBOX,
|
|
"MBOX cmpl: cmd:x%x mb:x%x x%x",
|
|
(uint32_t)pmbox->mbxCommand,
|
|
pmbox->un.varWords[0],
|
|
pmbox->un.varWords[1]);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* It is a fatal error if unknown mbox command completion.
|
|
*/
|
|
if (lpfc_sli_chk_mbx_command(pmbox->mbxCommand) ==
|
|
MBX_SHUTDOWN) {
|
|
/* Unknow mailbox command compl */
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
|
|
"(%d):0323 Unknown Mailbox command "
|
|
"%x Cmpl\n",
|
|
pmb->vport ? pmb->vport->vpi : 0,
|
|
pmbox->mbxCommand);
|
|
phba->link_state = LPFC_HBA_ERROR;
|
|
phba->work_hs = HS_FFER3;
|
|
lpfc_handle_eratt(phba);
|
|
continue;
|
|
}
|
|
|
|
if (pmbox->mbxStatus) {
|
|
phba->sli.slistat.mbox_stat_err++;
|
|
if (pmbox->mbxStatus == MBXERR_NO_RESOURCES) {
|
|
/* Mbox cmd cmpl error - RETRYing */
|
|
lpfc_printf_log(phba, KERN_INFO,
|
|
LOG_MBOX | LOG_SLI,
|
|
"(%d):0305 Mbox cmd cmpl "
|
|
"error - RETRYing Data: x%x "
|
|
"x%x x%x x%x\n",
|
|
pmb->vport ? pmb->vport->vpi :0,
|
|
pmbox->mbxCommand,
|
|
pmbox->mbxStatus,
|
|
pmbox->un.varWords[0],
|
|
pmb->vport->port_state);
|
|
pmbox->mbxStatus = 0;
|
|
pmbox->mbxOwner = OWN_HOST;
|
|
spin_lock_irq(&phba->hbalock);
|
|
phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
|
|
spin_unlock_irq(&phba->hbalock);
|
|
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
|
|
if (rc == MBX_SUCCESS)
|
|
continue;
|
|
}
|
|
}
|
|
|
|
/* Mailbox cmd <cmd> Cmpl <cmpl> */
|
|
lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
|
|
"(%d):0307 Mailbox cmd x%x Cmpl x%p "
|
|
"Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x\n",
|
|
pmb->vport ? pmb->vport->vpi : 0,
|
|
pmbox->mbxCommand,
|
|
pmb->mbox_cmpl,
|
|
*((uint32_t *) pmbox),
|
|
pmbox->un.varWords[0],
|
|
pmbox->un.varWords[1],
|
|
pmbox->un.varWords[2],
|
|
pmbox->un.varWords[3],
|
|
pmbox->un.varWords[4],
|
|
pmbox->un.varWords[5],
|
|
pmbox->un.varWords[6],
|
|
pmbox->un.varWords[7]);
|
|
|
|
if (pmb->mbox_cmpl)
|
|
pmb->mbox_cmpl(phba,pmb);
|
|
} while (1);
|
|
return 0;
|
|
}
|
|
|
|
static struct lpfc_dmabuf *
|
|
lpfc_sli_replace_hbqbuff(struct lpfc_hba *phba, uint32_t tag)
|
|
{
|
|
struct hbq_dmabuf *hbq_entry, *new_hbq_entry;
|
|
uint32_t hbqno;
|
|
void *virt; /* virtual address ptr */
|
|
dma_addr_t phys; /* mapped address */
|
|
|
|
hbq_entry = lpfc_sli_hbqbuf_find(phba, tag);
|
|
if (hbq_entry == NULL)
|
|
return NULL;
|
|
list_del(&hbq_entry->dbuf.list);
|
|
|
|
hbqno = tag >> 16;
|
|
new_hbq_entry = (phba->hbqs[hbqno].hbq_alloc_buffer)(phba);
|
|
if (new_hbq_entry == NULL)
|
|
return &hbq_entry->dbuf;
|
|
new_hbq_entry->tag = -1;
|
|
phys = new_hbq_entry->dbuf.phys;
|
|
virt = new_hbq_entry->dbuf.virt;
|
|
new_hbq_entry->dbuf.phys = hbq_entry->dbuf.phys;
|
|
new_hbq_entry->dbuf.virt = hbq_entry->dbuf.virt;
|
|
hbq_entry->dbuf.phys = phys;
|
|
hbq_entry->dbuf.virt = virt;
|
|
lpfc_sli_free_hbq(phba, hbq_entry);
|
|
return &new_hbq_entry->dbuf;
|
|
}
|
|
|
|
|
|
static int
|
|
lpfc_sli_process_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
|
|
struct lpfc_iocbq *saveq)
|
|
{
|
|
IOCB_t * irsp;
|
|
WORD5 * w5p;
|
|
uint32_t Rctl, Type;
|
|
uint32_t match, i;
|
|
|
|
match = 0;
|
|
irsp = &(saveq->iocb);
|
|
|
|
if (irsp->ulpCommand == CMD_ASYNC_STATUS) {
|
|
if (pring->lpfc_sli_rcv_async_status)
|
|
pring->lpfc_sli_rcv_async_status(phba, pring, saveq);
|
|
else
|
|
lpfc_printf_log(phba,
|
|
KERN_WARNING,
|
|
LOG_SLI,
|
|
"0316 Ring %d handler: unexpected "
|
|
"ASYNC_STATUS iocb received evt_code "
|
|
"0x%x\n",
|
|
pring->ringno,
|
|
irsp->un.asyncstat.evt_code);
|
|
return 1;
|
|
}
|
|
|
|
if ((irsp->ulpCommand == CMD_RCV_ELS_REQ64_CX)
|
|
|| (irsp->ulpCommand == CMD_RCV_ELS_REQ_CX)
|
|
|| (irsp->ulpCommand == CMD_IOCB_RCV_ELS64_CX)
|
|
|| (irsp->ulpCommand == CMD_IOCB_RCV_CONT64_CX)) {
|
|
Rctl = FC_ELS_REQ;
|
|
Type = FC_ELS_DATA;
|
|
} else {
|
|
w5p =
|
|
(WORD5 *) & (saveq->iocb.un.
|
|
ulpWord[5]);
|
|
Rctl = w5p->hcsw.Rctl;
|
|
Type = w5p->hcsw.Type;
|
|
|
|
/* Firmware Workaround */
|
|
if ((Rctl == 0) && (pring->ringno == LPFC_ELS_RING) &&
|
|
(irsp->ulpCommand == CMD_RCV_SEQUENCE64_CX ||
|
|
irsp->ulpCommand == CMD_IOCB_RCV_SEQ64_CX)) {
|
|
Rctl = FC_ELS_REQ;
|
|
Type = FC_ELS_DATA;
|
|
w5p->hcsw.Rctl = Rctl;
|
|
w5p->hcsw.Type = Type;
|
|
}
|
|
}
|
|
|
|
if (phba->sli3_options & LPFC_SLI3_HBQ_ENABLED) {
|
|
if (irsp->ulpBdeCount != 0)
|
|
saveq->context2 = lpfc_sli_replace_hbqbuff(phba,
|
|
irsp->un.ulpWord[3]);
|
|
if (irsp->ulpBdeCount == 2)
|
|
saveq->context3 = lpfc_sli_replace_hbqbuff(phba,
|
|
irsp->unsli3.sli3Words[7]);
|
|
}
|
|
|
|
/* unSolicited Responses */
|
|
if (pring->prt[0].profile) {
|
|
if (pring->prt[0].lpfc_sli_rcv_unsol_event)
|
|
(pring->prt[0].lpfc_sli_rcv_unsol_event) (phba, pring,
|
|
saveq);
|
|
match = 1;
|
|
} else {
|
|
/* We must search, based on rctl / type
|
|
for the right routine */
|
|
for (i = 0; i < pring->num_mask;
|
|
i++) {
|
|
if ((pring->prt[i].rctl ==
|
|
Rctl)
|
|
&& (pring->prt[i].
|
|
type == Type)) {
|
|
if (pring->prt[i].lpfc_sli_rcv_unsol_event)
|
|
(pring->prt[i].lpfc_sli_rcv_unsol_event)
|
|
(phba, pring, saveq);
|
|
match = 1;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
if (match == 0) {
|
|
/* Unexpected Rctl / Type received */
|
|
/* Ring <ringno> handler: unexpected
|
|
Rctl <Rctl> Type <Type> received */
|
|
lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
|
|
"0313 Ring %d handler: unexpected Rctl x%x "
|
|
"Type x%x received\n",
|
|
pring->ringno, Rctl, Type);
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
static struct lpfc_iocbq *
|
|
lpfc_sli_iocbq_lookup(struct lpfc_hba *phba,
|
|
struct lpfc_sli_ring *pring,
|
|
struct lpfc_iocbq *prspiocb)
|
|
{
|
|
struct lpfc_iocbq *cmd_iocb = NULL;
|
|
uint16_t iotag;
|
|
|
|
iotag = prspiocb->iocb.ulpIoTag;
|
|
|
|
if (iotag != 0 && iotag <= phba->sli.last_iotag) {
|
|
cmd_iocb = phba->sli.iocbq_lookup[iotag];
|
|
list_del_init(&cmd_iocb->list);
|
|
pring->txcmplq_cnt--;
|
|
return cmd_iocb;
|
|
}
|
|
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
|
|
"0317 iotag x%x is out off "
|
|
"range: max iotag x%x wd0 x%x\n",
|
|
iotag, phba->sli.last_iotag,
|
|
*(((uint32_t *) &prspiocb->iocb) + 7));
|
|
return NULL;
|
|
}
|
|
|
|
static int
|
|
lpfc_sli_process_sol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
|
|
struct lpfc_iocbq *saveq)
|
|
{
|
|
struct lpfc_iocbq *cmdiocbp;
|
|
int rc = 1;
|
|
unsigned long iflag;
|
|
|
|
/* Based on the iotag field, get the cmd IOCB from the txcmplq */
|
|
spin_lock_irqsave(&phba->hbalock, iflag);
|
|
cmdiocbp = lpfc_sli_iocbq_lookup(phba, pring, saveq);
|
|
spin_unlock_irqrestore(&phba->hbalock, iflag);
|
|
|
|
if (cmdiocbp) {
|
|
if (cmdiocbp->iocb_cmpl) {
|
|
/*
|
|
* Post all ELS completions to the worker thread.
|
|
* All other are passed to the completion callback.
|
|
*/
|
|
if (pring->ringno == LPFC_ELS_RING) {
|
|
if (cmdiocbp->iocb_flag & LPFC_DRIVER_ABORTED) {
|
|
cmdiocbp->iocb_flag &=
|
|
~LPFC_DRIVER_ABORTED;
|
|
saveq->iocb.ulpStatus =
|
|
IOSTAT_LOCAL_REJECT;
|
|
saveq->iocb.un.ulpWord[4] =
|
|
IOERR_SLI_ABORTED;
|
|
}
|
|
}
|
|
(cmdiocbp->iocb_cmpl) (phba, cmdiocbp, saveq);
|
|
} else
|
|
lpfc_sli_release_iocbq(phba, cmdiocbp);
|
|
} else {
|
|
/*
|
|
* Unknown initiating command based on the response iotag.
|
|
* This could be the case on the ELS ring because of
|
|
* lpfc_els_abort().
|
|
*/
|
|
if (pring->ringno != LPFC_ELS_RING) {
|
|
/*
|
|
* Ring <ringno> handler: unexpected completion IoTag
|
|
* <IoTag>
|
|
*/
|
|
lpfc_printf_vlog(cmdiocbp->vport, KERN_WARNING, LOG_SLI,
|
|
"0322 Ring %d handler: "
|
|
"unexpected completion IoTag x%x "
|
|
"Data: x%x x%x x%x x%x\n",
|
|
pring->ringno,
|
|
saveq->iocb.ulpIoTag,
|
|
saveq->iocb.ulpStatus,
|
|
saveq->iocb.un.ulpWord[4],
|
|
saveq->iocb.ulpCommand,
|
|
saveq->iocb.ulpContext);
|
|
}
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void
|
|
lpfc_sli_rsp_pointers_error(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
|
|
{
|
|
struct lpfc_pgp *pgp = (phba->sli_rev == 3) ?
|
|
&phba->slim2p->mbx.us.s3_pgp.port[pring->ringno] :
|
|
&phba->slim2p->mbx.us.s2.port[pring->ringno];
|
|
/*
|
|
* Ring <ringno> handler: portRspPut <portRspPut> is bigger then
|
|
* rsp ring <portRspMax>
|
|
*/
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
|
|
"0312 Ring %d handler: portRspPut %d "
|
|
"is bigger then rsp ring %d\n",
|
|
pring->ringno, le32_to_cpu(pgp->rspPutInx),
|
|
pring->numRiocb);
|
|
|
|
phba->link_state = LPFC_HBA_ERROR;
|
|
|
|
/*
|
|
* All error attention handlers are posted to
|
|
* worker thread
|
|
*/
|
|
phba->work_ha |= HA_ERATT;
|
|
phba->work_hs = HS_FFER3;
|
|
|
|
/* hbalock should already be held */
|
|
if (phba->work_wait)
|
|
lpfc_worker_wake_up(phba);
|
|
|
|
return;
|
|
}
|
|
|
|
void lpfc_sli_poll_fcp_ring(struct lpfc_hba *phba)
|
|
{
|
|
struct lpfc_sli *psli = &phba->sli;
|
|
struct lpfc_sli_ring *pring = &psli->ring[LPFC_FCP_RING];
|
|
IOCB_t *irsp = NULL;
|
|
IOCB_t *entry = NULL;
|
|
struct lpfc_iocbq *cmdiocbq = NULL;
|
|
struct lpfc_iocbq rspiocbq;
|
|
struct lpfc_pgp *pgp;
|
|
uint32_t status;
|
|
uint32_t portRspPut, portRspMax;
|
|
int type;
|
|
uint32_t rsp_cmpl = 0;
|
|
uint32_t ha_copy;
|
|
unsigned long iflags;
|
|
|
|
pring->stats.iocb_event++;
|
|
|
|
pgp = (phba->sli_rev == 3) ?
|
|
&phba->slim2p->mbx.us.s3_pgp.port[pring->ringno] :
|
|
&phba->slim2p->mbx.us.s2.port[pring->ringno];
|
|
|
|
|
|
/*
|
|
* The next available response entry should never exceed the maximum
|
|
* entries. If it does, treat it as an adapter hardware error.
|
|
*/
|
|
portRspMax = pring->numRiocb;
|
|
portRspPut = le32_to_cpu(pgp->rspPutInx);
|
|
if (unlikely(portRspPut >= portRspMax)) {
|
|
lpfc_sli_rsp_pointers_error(phba, pring);
|
|
return;
|
|
}
|
|
|
|
rmb();
|
|
while (pring->rspidx != portRspPut) {
|
|
entry = lpfc_resp_iocb(phba, pring);
|
|
if (++pring->rspidx >= portRspMax)
|
|
pring->rspidx = 0;
|
|
|
|
lpfc_sli_pcimem_bcopy((uint32_t *) entry,
|
|
(uint32_t *) &rspiocbq.iocb,
|
|
phba->iocb_rsp_size);
|
|
irsp = &rspiocbq.iocb;
|
|
type = lpfc_sli_iocb_cmd_type(irsp->ulpCommand & CMD_IOCB_MASK);
|
|
pring->stats.iocb_rsp++;
|
|
rsp_cmpl++;
|
|
|
|
if (unlikely(irsp->ulpStatus)) {
|
|
/* Rsp ring <ringno> error: IOCB */
|
|
lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
|
|
"0326 Rsp Ring %d error: IOCB Data: "
|
|
"x%x x%x x%x x%x x%x x%x x%x x%x\n",
|
|
pring->ringno,
|
|
irsp->un.ulpWord[0],
|
|
irsp->un.ulpWord[1],
|
|
irsp->un.ulpWord[2],
|
|
irsp->un.ulpWord[3],
|
|
irsp->un.ulpWord[4],
|
|
irsp->un.ulpWord[5],
|
|
*(((uint32_t *) irsp) + 6),
|
|
*(((uint32_t *) irsp) + 7));
|
|
}
|
|
|
|
switch (type) {
|
|
case LPFC_ABORT_IOCB:
|
|
case LPFC_SOL_IOCB:
|
|
/*
|
|
* Idle exchange closed via ABTS from port. No iocb
|
|
* resources need to be recovered.
|
|
*/
|
|
if (unlikely(irsp->ulpCommand == CMD_XRI_ABORTED_CX)) {
|
|
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
|
|
"0314 IOCB cmd 0x%x "
|
|
"processed. Skipping "
|
|
"completion",
|
|
irsp->ulpCommand);
|
|
break;
|
|
}
|
|
|
|
spin_lock_irqsave(&phba->hbalock, iflags);
|
|
cmdiocbq = lpfc_sli_iocbq_lookup(phba, pring,
|
|
&rspiocbq);
|
|
spin_unlock_irqrestore(&phba->hbalock, iflags);
|
|
if ((cmdiocbq) && (cmdiocbq->iocb_cmpl)) {
|
|
(cmdiocbq->iocb_cmpl)(phba, cmdiocbq,
|
|
&rspiocbq);
|
|
}
|
|
break;
|
|
default:
|
|
if (irsp->ulpCommand == CMD_ADAPTER_MSG) {
|
|
char adaptermsg[LPFC_MAX_ADPTMSG];
|
|
memset(adaptermsg, 0, LPFC_MAX_ADPTMSG);
|
|
memcpy(&adaptermsg[0], (uint8_t *) irsp,
|
|
MAX_MSG_DATA);
|
|
dev_warn(&((phba->pcidev)->dev),
|
|
"lpfc%d: %s\n",
|
|
phba->brd_no, adaptermsg);
|
|
} else {
|
|
/* Unknown IOCB command */
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
|
|
"0321 Unknown IOCB command "
|
|
"Data: x%x, x%x x%x x%x x%x\n",
|
|
type, irsp->ulpCommand,
|
|
irsp->ulpStatus,
|
|
irsp->ulpIoTag,
|
|
irsp->ulpContext);
|
|
}
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* The response IOCB has been processed. Update the ring
|
|
* pointer in SLIM. If the port response put pointer has not
|
|
* been updated, sync the pgp->rspPutInx and fetch the new port
|
|
* response put pointer.
|
|
*/
|
|
writel(pring->rspidx, &phba->host_gp[pring->ringno].rspGetInx);
|
|
|
|
if (pring->rspidx == portRspPut)
|
|
portRspPut = le32_to_cpu(pgp->rspPutInx);
|
|
}
|
|
|
|
ha_copy = readl(phba->HAregaddr);
|
|
ha_copy >>= (LPFC_FCP_RING * 4);
|
|
|
|
if ((rsp_cmpl > 0) && (ha_copy & HA_R0RE_REQ)) {
|
|
spin_lock_irqsave(&phba->hbalock, iflags);
|
|
pring->stats.iocb_rsp_full++;
|
|
status = ((CA_R0ATT | CA_R0RE_RSP) << (LPFC_FCP_RING * 4));
|
|
writel(status, phba->CAregaddr);
|
|
readl(phba->CAregaddr);
|
|
spin_unlock_irqrestore(&phba->hbalock, iflags);
|
|
}
|
|
if ((ha_copy & HA_R0CE_RSP) &&
|
|
(pring->flag & LPFC_CALL_RING_AVAILABLE)) {
|
|
spin_lock_irqsave(&phba->hbalock, iflags);
|
|
pring->flag &= ~LPFC_CALL_RING_AVAILABLE;
|
|
pring->stats.iocb_cmd_empty++;
|
|
|
|
/* Force update of the local copy of cmdGetInx */
|
|
pring->local_getidx = le32_to_cpu(pgp->cmdGetInx);
|
|
lpfc_sli_resume_iocb(phba, pring);
|
|
|
|
if ((pring->lpfc_sli_cmd_available))
|
|
(pring->lpfc_sli_cmd_available) (phba, pring);
|
|
|
|
spin_unlock_irqrestore(&phba->hbalock, iflags);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* This routine presumes LPFC_FCP_RING handling and doesn't bother
|
|
* to check it explicitly.
|
|
*/
|
|
static int
|
|
lpfc_sli_handle_fast_ring_event(struct lpfc_hba *phba,
|
|
struct lpfc_sli_ring *pring, uint32_t mask)
|
|
{
|
|
struct lpfc_pgp *pgp = (phba->sli_rev == 3) ?
|
|
&phba->slim2p->mbx.us.s3_pgp.port[pring->ringno] :
|
|
&phba->slim2p->mbx.us.s2.port[pring->ringno];
|
|
IOCB_t *irsp = NULL;
|
|
IOCB_t *entry = NULL;
|
|
struct lpfc_iocbq *cmdiocbq = NULL;
|
|
struct lpfc_iocbq rspiocbq;
|
|
uint32_t status;
|
|
uint32_t portRspPut, portRspMax;
|
|
int rc = 1;
|
|
lpfc_iocb_type type;
|
|
unsigned long iflag;
|
|
uint32_t rsp_cmpl = 0;
|
|
|
|
spin_lock_irqsave(&phba->hbalock, iflag);
|
|
pring->stats.iocb_event++;
|
|
|
|
/*
|
|
* The next available response entry should never exceed the maximum
|
|
* entries. If it does, treat it as an adapter hardware error.
|
|
*/
|
|
portRspMax = pring->numRiocb;
|
|
portRspPut = le32_to_cpu(pgp->rspPutInx);
|
|
if (unlikely(portRspPut >= portRspMax)) {
|
|
lpfc_sli_rsp_pointers_error(phba, pring);
|
|
spin_unlock_irqrestore(&phba->hbalock, iflag);
|
|
return 1;
|
|
}
|
|
|
|
rmb();
|
|
while (pring->rspidx != portRspPut) {
|
|
/*
|
|
* Fetch an entry off the ring and copy it into a local data
|
|
* structure. The copy involves a byte-swap since the
|
|
* network byte order and pci byte orders are different.
|
|
*/
|
|
entry = lpfc_resp_iocb(phba, pring);
|
|
phba->last_completion_time = jiffies;
|
|
|
|
if (++pring->rspidx >= portRspMax)
|
|
pring->rspidx = 0;
|
|
|
|
lpfc_sli_pcimem_bcopy((uint32_t *) entry,
|
|
(uint32_t *) &rspiocbq.iocb,
|
|
phba->iocb_rsp_size);
|
|
INIT_LIST_HEAD(&(rspiocbq.list));
|
|
irsp = &rspiocbq.iocb;
|
|
|
|
type = lpfc_sli_iocb_cmd_type(irsp->ulpCommand & CMD_IOCB_MASK);
|
|
pring->stats.iocb_rsp++;
|
|
rsp_cmpl++;
|
|
|
|
if (unlikely(irsp->ulpStatus)) {
|
|
/*
|
|
* If resource errors reported from HBA, reduce
|
|
* queuedepths of the SCSI device.
|
|
*/
|
|
if ((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) &&
|
|
(irsp->un.ulpWord[4] == IOERR_NO_RESOURCES)) {
|
|
spin_unlock_irqrestore(&phba->hbalock, iflag);
|
|
lpfc_adjust_queue_depth(phba);
|
|
spin_lock_irqsave(&phba->hbalock, iflag);
|
|
}
|
|
|
|
/* Rsp ring <ringno> error: IOCB */
|
|
lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
|
|
"0336 Rsp Ring %d error: IOCB Data: "
|
|
"x%x x%x x%x x%x x%x x%x x%x x%x\n",
|
|
pring->ringno,
|
|
irsp->un.ulpWord[0],
|
|
irsp->un.ulpWord[1],
|
|
irsp->un.ulpWord[2],
|
|
irsp->un.ulpWord[3],
|
|
irsp->un.ulpWord[4],
|
|
irsp->un.ulpWord[5],
|
|
*(((uint32_t *) irsp) + 6),
|
|
*(((uint32_t *) irsp) + 7));
|
|
}
|
|
|
|
switch (type) {
|
|
case LPFC_ABORT_IOCB:
|
|
case LPFC_SOL_IOCB:
|
|
/*
|
|
* Idle exchange closed via ABTS from port. No iocb
|
|
* resources need to be recovered.
|
|
*/
|
|
if (unlikely(irsp->ulpCommand == CMD_XRI_ABORTED_CX)) {
|
|
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
|
|
"0333 IOCB cmd 0x%x"
|
|
" processed. Skipping"
|
|
" completion\n",
|
|
irsp->ulpCommand);
|
|
break;
|
|
}
|
|
|
|
cmdiocbq = lpfc_sli_iocbq_lookup(phba, pring,
|
|
&rspiocbq);
|
|
if ((cmdiocbq) && (cmdiocbq->iocb_cmpl)) {
|
|
if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
|
|
(cmdiocbq->iocb_cmpl)(phba, cmdiocbq,
|
|
&rspiocbq);
|
|
} else {
|
|
spin_unlock_irqrestore(&phba->hbalock,
|
|
iflag);
|
|
(cmdiocbq->iocb_cmpl)(phba, cmdiocbq,
|
|
&rspiocbq);
|
|
spin_lock_irqsave(&phba->hbalock,
|
|
iflag);
|
|
}
|
|
}
|
|
break;
|
|
case LPFC_UNSOL_IOCB:
|
|
spin_unlock_irqrestore(&phba->hbalock, iflag);
|
|
lpfc_sli_process_unsol_iocb(phba, pring, &rspiocbq);
|
|
spin_lock_irqsave(&phba->hbalock, iflag);
|
|
break;
|
|
default:
|
|
if (irsp->ulpCommand == CMD_ADAPTER_MSG) {
|
|
char adaptermsg[LPFC_MAX_ADPTMSG];
|
|
memset(adaptermsg, 0, LPFC_MAX_ADPTMSG);
|
|
memcpy(&adaptermsg[0], (uint8_t *) irsp,
|
|
MAX_MSG_DATA);
|
|
dev_warn(&((phba->pcidev)->dev),
|
|
"lpfc%d: %s\n",
|
|
phba->brd_no, adaptermsg);
|
|
} else {
|
|
/* Unknown IOCB command */
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
|
|
"0334 Unknown IOCB command "
|
|
"Data: x%x, x%x x%x x%x x%x\n",
|
|
type, irsp->ulpCommand,
|
|
irsp->ulpStatus,
|
|
irsp->ulpIoTag,
|
|
irsp->ulpContext);
|
|
}
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* The response IOCB has been processed. Update the ring
|
|
* pointer in SLIM. If the port response put pointer has not
|
|
* been updated, sync the pgp->rspPutInx and fetch the new port
|
|
* response put pointer.
|
|
*/
|
|
writel(pring->rspidx, &phba->host_gp[pring->ringno].rspGetInx);
|
|
|
|
if (pring->rspidx == portRspPut)
|
|
portRspPut = le32_to_cpu(pgp->rspPutInx);
|
|
}
|
|
|
|
if ((rsp_cmpl > 0) && (mask & HA_R0RE_REQ)) {
|
|
pring->stats.iocb_rsp_full++;
|
|
status = ((CA_R0ATT | CA_R0RE_RSP) << (pring->ringno * 4));
|
|
writel(status, phba->CAregaddr);
|
|
readl(phba->CAregaddr);
|
|
}
|
|
if ((mask & HA_R0CE_RSP) && (pring->flag & LPFC_CALL_RING_AVAILABLE)) {
|
|
pring->flag &= ~LPFC_CALL_RING_AVAILABLE;
|
|
pring->stats.iocb_cmd_empty++;
|
|
|
|
/* Force update of the local copy of cmdGetInx */
|
|
pring->local_getidx = le32_to_cpu(pgp->cmdGetInx);
|
|
lpfc_sli_resume_iocb(phba, pring);
|
|
|
|
if ((pring->lpfc_sli_cmd_available))
|
|
(pring->lpfc_sli_cmd_available) (phba, pring);
|
|
|
|
}
|
|
|
|
spin_unlock_irqrestore(&phba->hbalock, iflag);
|
|
return rc;
|
|
}
|
|
|
|
int
|
|
lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba,
|
|
struct lpfc_sli_ring *pring, uint32_t mask)
|
|
{
|
|
struct lpfc_pgp *pgp = (phba->sli_rev == 3) ?
|
|
&phba->slim2p->mbx.us.s3_pgp.port[pring->ringno] :
|
|
&phba->slim2p->mbx.us.s2.port[pring->ringno];
|
|
IOCB_t *entry;
|
|
IOCB_t *irsp = NULL;
|
|
struct lpfc_iocbq *rspiocbp = NULL;
|
|
struct lpfc_iocbq *next_iocb;
|
|
struct lpfc_iocbq *cmdiocbp;
|
|
struct lpfc_iocbq *saveq;
|
|
uint8_t iocb_cmd_type;
|
|
lpfc_iocb_type type;
|
|
uint32_t status, free_saveq;
|
|
uint32_t portRspPut, portRspMax;
|
|
int rc = 1;
|
|
unsigned long iflag;
|
|
|
|
spin_lock_irqsave(&phba->hbalock, iflag);
|
|
pring->stats.iocb_event++;
|
|
|
|
/*
|
|
* The next available response entry should never exceed the maximum
|
|
* entries. If it does, treat it as an adapter hardware error.
|
|
*/
|
|
portRspMax = pring->numRiocb;
|
|
portRspPut = le32_to_cpu(pgp->rspPutInx);
|
|
if (portRspPut >= portRspMax) {
|
|
/*
|
|
* Ring <ringno> handler: portRspPut <portRspPut> is bigger then
|
|
* rsp ring <portRspMax>
|
|
*/
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
|
|
"0303 Ring %d handler: portRspPut %d "
|
|
"is bigger then rsp ring %d\n",
|
|
pring->ringno, portRspPut, portRspMax);
|
|
|
|
phba->link_state = LPFC_HBA_ERROR;
|
|
spin_unlock_irqrestore(&phba->hbalock, iflag);
|
|
|
|
phba->work_hs = HS_FFER3;
|
|
lpfc_handle_eratt(phba);
|
|
|
|
return 1;
|
|
}
|
|
|
|
rmb();
|
|
while (pring->rspidx != portRspPut) {
|
|
/*
|
|
* Build a completion list and call the appropriate handler.
|
|
* The process is to get the next available response iocb, get
|
|
* a free iocb from the list, copy the response data into the
|
|
* free iocb, insert to the continuation list, and update the
|
|
* next response index to slim. This process makes response
|
|
* iocb's in the ring available to DMA as fast as possible but
|
|
* pays a penalty for a copy operation. Since the iocb is
|
|
* only 32 bytes, this penalty is considered small relative to
|
|
* the PCI reads for register values and a slim write. When
|
|
* the ulpLe field is set, the entire Command has been
|
|
* received.
|
|
*/
|
|
entry = lpfc_resp_iocb(phba, pring);
|
|
|
|
phba->last_completion_time = jiffies;
|
|
rspiocbp = __lpfc_sli_get_iocbq(phba);
|
|
if (rspiocbp == NULL) {
|
|
printk(KERN_ERR "%s: out of buffers! Failing "
|
|
"completion.\n", __FUNCTION__);
|
|
break;
|
|
}
|
|
|
|
lpfc_sli_pcimem_bcopy(entry, &rspiocbp->iocb,
|
|
phba->iocb_rsp_size);
|
|
irsp = &rspiocbp->iocb;
|
|
|
|
if (++pring->rspidx >= portRspMax)
|
|
pring->rspidx = 0;
|
|
|
|
if (pring->ringno == LPFC_ELS_RING) {
|
|
lpfc_debugfs_slow_ring_trc(phba,
|
|
"IOCB rsp ring: wd4:x%08x wd6:x%08x wd7:x%08x",
|
|
*(((uint32_t *) irsp) + 4),
|
|
*(((uint32_t *) irsp) + 6),
|
|
*(((uint32_t *) irsp) + 7));
|
|
}
|
|
|
|
writel(pring->rspidx, &phba->host_gp[pring->ringno].rspGetInx);
|
|
|
|
if (list_empty(&(pring->iocb_continueq))) {
|
|
list_add(&rspiocbp->list, &(pring->iocb_continueq));
|
|
} else {
|
|
list_add_tail(&rspiocbp->list,
|
|
&(pring->iocb_continueq));
|
|
}
|
|
|
|
pring->iocb_continueq_cnt++;
|
|
if (irsp->ulpLe) {
|
|
/*
|
|
* By default, the driver expects to free all resources
|
|
* associated with this iocb completion.
|
|
*/
|
|
free_saveq = 1;
|
|
saveq = list_get_first(&pring->iocb_continueq,
|
|
struct lpfc_iocbq, list);
|
|
irsp = &(saveq->iocb);
|
|
list_del_init(&pring->iocb_continueq);
|
|
pring->iocb_continueq_cnt = 0;
|
|
|
|
pring->stats.iocb_rsp++;
|
|
|
|
/*
|
|
* If resource errors reported from HBA, reduce
|
|
* queuedepths of the SCSI device.
|
|
*/
|
|
if ((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) &&
|
|
(irsp->un.ulpWord[4] == IOERR_NO_RESOURCES)) {
|
|
spin_unlock_irqrestore(&phba->hbalock, iflag);
|
|
lpfc_adjust_queue_depth(phba);
|
|
spin_lock_irqsave(&phba->hbalock, iflag);
|
|
}
|
|
|
|
if (irsp->ulpStatus) {
|
|
/* Rsp ring <ringno> error: IOCB */
|
|
lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
|
|
"0328 Rsp Ring %d error: "
|
|
"IOCB Data: "
|
|
"x%x x%x x%x x%x "
|
|
"x%x x%x x%x x%x "
|
|
"x%x x%x x%x x%x "
|
|
"x%x x%x x%x x%x\n",
|
|
pring->ringno,
|
|
irsp->un.ulpWord[0],
|
|
irsp->un.ulpWord[1],
|
|
irsp->un.ulpWord[2],
|
|
irsp->un.ulpWord[3],
|
|
irsp->un.ulpWord[4],
|
|
irsp->un.ulpWord[5],
|
|
*(((uint32_t *) irsp) + 6),
|
|
*(((uint32_t *) irsp) + 7),
|
|
*(((uint32_t *) irsp) + 8),
|
|
*(((uint32_t *) irsp) + 9),
|
|
*(((uint32_t *) irsp) + 10),
|
|
*(((uint32_t *) irsp) + 11),
|
|
*(((uint32_t *) irsp) + 12),
|
|
*(((uint32_t *) irsp) + 13),
|
|
*(((uint32_t *) irsp) + 14),
|
|
*(((uint32_t *) irsp) + 15));
|
|
}
|
|
|
|
/*
|
|
* Fetch the IOCB command type and call the correct
|
|
* completion routine. Solicited and Unsolicited
|
|
* IOCBs on the ELS ring get freed back to the
|
|
* lpfc_iocb_list by the discovery kernel thread.
|
|
*/
|
|
iocb_cmd_type = irsp->ulpCommand & CMD_IOCB_MASK;
|
|
type = lpfc_sli_iocb_cmd_type(iocb_cmd_type);
|
|
if (type == LPFC_SOL_IOCB) {
|
|
spin_unlock_irqrestore(&phba->hbalock,
|
|
iflag);
|
|
rc = lpfc_sli_process_sol_iocb(phba, pring,
|
|
saveq);
|
|
spin_lock_irqsave(&phba->hbalock, iflag);
|
|
} else if (type == LPFC_UNSOL_IOCB) {
|
|
spin_unlock_irqrestore(&phba->hbalock,
|
|
iflag);
|
|
rc = lpfc_sli_process_unsol_iocb(phba, pring,
|
|
saveq);
|
|
spin_lock_irqsave(&phba->hbalock, iflag);
|
|
} else if (type == LPFC_ABORT_IOCB) {
|
|
if ((irsp->ulpCommand != CMD_XRI_ABORTED_CX) &&
|
|
((cmdiocbp =
|
|
lpfc_sli_iocbq_lookup(phba, pring,
|
|
saveq)))) {
|
|
/* Call the specified completion
|
|
routine */
|
|
if (cmdiocbp->iocb_cmpl) {
|
|
spin_unlock_irqrestore(
|
|
&phba->hbalock,
|
|
iflag);
|
|
(cmdiocbp->iocb_cmpl) (phba,
|
|
cmdiocbp, saveq);
|
|
spin_lock_irqsave(
|
|
&phba->hbalock,
|
|
iflag);
|
|
} else
|
|
__lpfc_sli_release_iocbq(phba,
|
|
cmdiocbp);
|
|
}
|
|
} else if (type == LPFC_UNKNOWN_IOCB) {
|
|
if (irsp->ulpCommand == CMD_ADAPTER_MSG) {
|
|
|
|
char adaptermsg[LPFC_MAX_ADPTMSG];
|
|
|
|
memset(adaptermsg, 0,
|
|
LPFC_MAX_ADPTMSG);
|
|
memcpy(&adaptermsg[0], (uint8_t *) irsp,
|
|
MAX_MSG_DATA);
|
|
dev_warn(&((phba->pcidev)->dev),
|
|
"lpfc%d: %s\n",
|
|
phba->brd_no, adaptermsg);
|
|
} else {
|
|
/* Unknown IOCB command */
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
|
|
"0335 Unknown IOCB "
|
|
"command Data: x%x "
|
|
"x%x x%x x%x\n",
|
|
irsp->ulpCommand,
|
|
irsp->ulpStatus,
|
|
irsp->ulpIoTag,
|
|
irsp->ulpContext);
|
|
}
|
|
}
|
|
|
|
if (free_saveq) {
|
|
list_for_each_entry_safe(rspiocbp, next_iocb,
|
|
&saveq->list, list) {
|
|
list_del(&rspiocbp->list);
|
|
__lpfc_sli_release_iocbq(phba,
|
|
rspiocbp);
|
|
}
|
|
__lpfc_sli_release_iocbq(phba, saveq);
|
|
}
|
|
rspiocbp = NULL;
|
|
}
|
|
|
|
/*
|
|
* If the port response put pointer has not been updated, sync
|
|
* the pgp->rspPutInx in the MAILBOX_tand fetch the new port
|
|
* response put pointer.
|
|
*/
|
|
if (pring->rspidx == portRspPut) {
|
|
portRspPut = le32_to_cpu(pgp->rspPutInx);
|
|
}
|
|
} /* while (pring->rspidx != portRspPut) */
|
|
|
|
if ((rspiocbp != NULL) && (mask & HA_R0RE_REQ)) {
|
|
/* At least one response entry has been freed */
|
|
pring->stats.iocb_rsp_full++;
|
|
/* SET RxRE_RSP in Chip Att register */
|
|
status = ((CA_R0ATT | CA_R0RE_RSP) << (pring->ringno * 4));
|
|
writel(status, phba->CAregaddr);
|
|
readl(phba->CAregaddr); /* flush */
|
|
}
|
|
if ((mask & HA_R0CE_RSP) && (pring->flag & LPFC_CALL_RING_AVAILABLE)) {
|
|
pring->flag &= ~LPFC_CALL_RING_AVAILABLE;
|
|
pring->stats.iocb_cmd_empty++;
|
|
|
|
/* Force update of the local copy of cmdGetInx */
|
|
pring->local_getidx = le32_to_cpu(pgp->cmdGetInx);
|
|
lpfc_sli_resume_iocb(phba, pring);
|
|
|
|
if ((pring->lpfc_sli_cmd_available))
|
|
(pring->lpfc_sli_cmd_available) (phba, pring);
|
|
|
|
}
|
|
|
|
spin_unlock_irqrestore(&phba->hbalock, iflag);
|
|
return rc;
|
|
}
|
|
|
|
void
|
|
lpfc_sli_abort_iocb_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
|
|
{
|
|
LIST_HEAD(completions);
|
|
struct lpfc_iocbq *iocb, *next_iocb;
|
|
IOCB_t *cmd = NULL;
|
|
|
|
if (pring->ringno == LPFC_ELS_RING) {
|
|
lpfc_fabric_abort_hba(phba);
|
|
}
|
|
|
|
/* Error everything on txq and txcmplq
|
|
* First do the txq.
|
|
*/
|
|
spin_lock_irq(&phba->hbalock);
|
|
list_splice_init(&pring->txq, &completions);
|
|
pring->txq_cnt = 0;
|
|
|
|
/* Next issue ABTS for everything on the txcmplq */
|
|
list_for_each_entry_safe(iocb, next_iocb, &pring->txcmplq, list)
|
|
lpfc_sli_issue_abort_iotag(phba, pring, iocb);
|
|
|
|
spin_unlock_irq(&phba->hbalock);
|
|
|
|
while (!list_empty(&completions)) {
|
|
iocb = list_get_first(&completions, struct lpfc_iocbq, list);
|
|
cmd = &iocb->iocb;
|
|
list_del_init(&iocb->list);
|
|
|
|
if (!iocb->iocb_cmpl)
|
|
lpfc_sli_release_iocbq(phba, iocb);
|
|
else {
|
|
cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
|
|
cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
|
|
(iocb->iocb_cmpl) (phba, iocb, iocb);
|
|
}
|
|
}
|
|
}
|
|
|
|
int
|
|
lpfc_sli_brdready(struct lpfc_hba *phba, uint32_t mask)
|
|
{
|
|
uint32_t status;
|
|
int i = 0;
|
|
int retval = 0;
|
|
|
|
/* Read the HBA Host Status Register */
|
|
status = readl(phba->HSregaddr);
|
|
|
|
/*
|
|
* Check status register every 100ms for 5 retries, then every
|
|
* 500ms for 5, then every 2.5 sec for 5, then reset board and
|
|
* every 2.5 sec for 4.
|
|
* Break our of the loop if errors occurred during init.
|
|
*/
|
|
while (((status & mask) != mask) &&
|
|
!(status & HS_FFERM) &&
|
|
i++ < 20) {
|
|
|
|
if (i <= 5)
|
|
msleep(10);
|
|
else if (i <= 10)
|
|
msleep(500);
|
|
else
|
|
msleep(2500);
|
|
|
|
if (i == 15) {
|
|
/* Do post */
|
|
phba->pport->port_state = LPFC_VPORT_UNKNOWN;
|
|
lpfc_sli_brdrestart(phba);
|
|
}
|
|
/* Read the HBA Host Status Register */
|
|
status = readl(phba->HSregaddr);
|
|
}
|
|
|
|
/* Check to see if any errors occurred during init */
|
|
if ((status & HS_FFERM) || (i >= 20)) {
|
|
phba->link_state = LPFC_HBA_ERROR;
|
|
retval = 1;
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
#define BARRIER_TEST_PATTERN (0xdeadbeef)
|
|
|
|
void lpfc_reset_barrier(struct lpfc_hba *phba)
|
|
{
|
|
uint32_t __iomem *resp_buf;
|
|
uint32_t __iomem *mbox_buf;
|
|
volatile uint32_t mbox;
|
|
uint32_t hc_copy;
|
|
int i;
|
|
uint8_t hdrtype;
|
|
|
|
pci_read_config_byte(phba->pcidev, PCI_HEADER_TYPE, &hdrtype);
|
|
if (hdrtype != 0x80 ||
|
|
(FC_JEDEC_ID(phba->vpd.rev.biuRev) != HELIOS_JEDEC_ID &&
|
|
FC_JEDEC_ID(phba->vpd.rev.biuRev) != THOR_JEDEC_ID))
|
|
return;
|
|
|
|
/*
|
|
* Tell the other part of the chip to suspend temporarily all
|
|
* its DMA activity.
|
|
*/
|
|
resp_buf = phba->MBslimaddr;
|
|
|
|
/* Disable the error attention */
|
|
hc_copy = readl(phba->HCregaddr);
|
|
writel((hc_copy & ~HC_ERINT_ENA), phba->HCregaddr);
|
|
readl(phba->HCregaddr); /* flush */
|
|
phba->link_flag |= LS_IGNORE_ERATT;
|
|
|
|
if (readl(phba->HAregaddr) & HA_ERATT) {
|
|
/* Clear Chip error bit */
|
|
writel(HA_ERATT, phba->HAregaddr);
|
|
phba->pport->stopped = 1;
|
|
}
|
|
|
|
mbox = 0;
|
|
((MAILBOX_t *)&mbox)->mbxCommand = MBX_KILL_BOARD;
|
|
((MAILBOX_t *)&mbox)->mbxOwner = OWN_CHIP;
|
|
|
|
writel(BARRIER_TEST_PATTERN, (resp_buf + 1));
|
|
mbox_buf = phba->MBslimaddr;
|
|
writel(mbox, mbox_buf);
|
|
|
|
for (i = 0;
|
|
readl(resp_buf + 1) != ~(BARRIER_TEST_PATTERN) && i < 50; i++)
|
|
mdelay(1);
|
|
|
|
if (readl(resp_buf + 1) != ~(BARRIER_TEST_PATTERN)) {
|
|
if (phba->sli.sli_flag & LPFC_SLI2_ACTIVE ||
|
|
phba->pport->stopped)
|
|
goto restore_hc;
|
|
else
|
|
goto clear_errat;
|
|
}
|
|
|
|
((MAILBOX_t *)&mbox)->mbxOwner = OWN_HOST;
|
|
for (i = 0; readl(resp_buf) != mbox && i < 500; i++)
|
|
mdelay(1);
|
|
|
|
clear_errat:
|
|
|
|
while (!(readl(phba->HAregaddr) & HA_ERATT) && ++i < 500)
|
|
mdelay(1);
|
|
|
|
if (readl(phba->HAregaddr) & HA_ERATT) {
|
|
writel(HA_ERATT, phba->HAregaddr);
|
|
phba->pport->stopped = 1;
|
|
}
|
|
|
|
restore_hc:
|
|
phba->link_flag &= ~LS_IGNORE_ERATT;
|
|
writel(hc_copy, phba->HCregaddr);
|
|
readl(phba->HCregaddr); /* flush */
|
|
}
|
|
|
|
int
|
|
lpfc_sli_brdkill(struct lpfc_hba *phba)
|
|
{
|
|
struct lpfc_sli *psli;
|
|
LPFC_MBOXQ_t *pmb;
|
|
uint32_t status;
|
|
uint32_t ha_copy;
|
|
int retval;
|
|
int i = 0;
|
|
|
|
psli = &phba->sli;
|
|
|
|
/* Kill HBA */
|
|
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
|
|
"0329 Kill HBA Data: x%x x%x\n",
|
|
phba->pport->port_state, psli->sli_flag);
|
|
|
|
pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
|
|
if (!pmb)
|
|
return 1;
|
|
|
|
/* Disable the error attention */
|
|
spin_lock_irq(&phba->hbalock);
|
|
status = readl(phba->HCregaddr);
|
|
status &= ~HC_ERINT_ENA;
|
|
writel(status, phba->HCregaddr);
|
|
readl(phba->HCregaddr); /* flush */
|
|
phba->link_flag |= LS_IGNORE_ERATT;
|
|
spin_unlock_irq(&phba->hbalock);
|
|
|
|
lpfc_kill_board(phba, pmb);
|
|
pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
|
|
retval = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
|
|
|
|
if (retval != MBX_SUCCESS) {
|
|
if (retval != MBX_BUSY)
|
|
mempool_free(pmb, phba->mbox_mem_pool);
|
|
spin_lock_irq(&phba->hbalock);
|
|
phba->link_flag &= ~LS_IGNORE_ERATT;
|
|
spin_unlock_irq(&phba->hbalock);
|
|
return 1;
|
|
}
|
|
|
|
psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
|
|
|
|
mempool_free(pmb, phba->mbox_mem_pool);
|
|
|
|
/* There is no completion for a KILL_BOARD mbox cmd. Check for an error
|
|
* attention every 100ms for 3 seconds. If we don't get ERATT after
|
|
* 3 seconds we still set HBA_ERROR state because the status of the
|
|
* board is now undefined.
|
|
*/
|
|
ha_copy = readl(phba->HAregaddr);
|
|
|
|
while ((i++ < 30) && !(ha_copy & HA_ERATT)) {
|
|
mdelay(100);
|
|
ha_copy = readl(phba->HAregaddr);
|
|
}
|
|
|
|
del_timer_sync(&psli->mbox_tmo);
|
|
if (ha_copy & HA_ERATT) {
|
|
writel(HA_ERATT, phba->HAregaddr);
|
|
phba->pport->stopped = 1;
|
|
}
|
|
spin_lock_irq(&phba->hbalock);
|
|
psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
|
|
phba->link_flag &= ~LS_IGNORE_ERATT;
|
|
spin_unlock_irq(&phba->hbalock);
|
|
|
|
psli->mbox_active = NULL;
|
|
lpfc_hba_down_post(phba);
|
|
phba->link_state = LPFC_HBA_ERROR;
|
|
|
|
return ha_copy & HA_ERATT ? 0 : 1;
|
|
}
|
|
|
|
int
|
|
lpfc_sli_brdreset(struct lpfc_hba *phba)
|
|
{
|
|
struct lpfc_sli *psli;
|
|
struct lpfc_sli_ring *pring;
|
|
uint16_t cfg_value;
|
|
int i;
|
|
|
|
psli = &phba->sli;
|
|
|
|
/* Reset HBA */
|
|
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
|
|
"0325 Reset HBA Data: x%x x%x\n",
|
|
phba->pport->port_state, psli->sli_flag);
|
|
|
|
/* perform board reset */
|
|
phba->fc_eventTag = 0;
|
|
phba->pport->fc_myDID = 0;
|
|
phba->pport->fc_prevDID = 0;
|
|
|
|
/* Turn off parity checking and serr during the physical reset */
|
|
pci_read_config_word(phba->pcidev, PCI_COMMAND, &cfg_value);
|
|
pci_write_config_word(phba->pcidev, PCI_COMMAND,
|
|
(cfg_value &
|
|
~(PCI_COMMAND_PARITY | PCI_COMMAND_SERR)));
|
|
|
|
psli->sli_flag &= ~(LPFC_SLI2_ACTIVE | LPFC_PROCESS_LA);
|
|
/* Now toggle INITFF bit in the Host Control Register */
|
|
writel(HC_INITFF, phba->HCregaddr);
|
|
mdelay(1);
|
|
readl(phba->HCregaddr); /* flush */
|
|
writel(0, phba->HCregaddr);
|
|
readl(phba->HCregaddr); /* flush */
|
|
|
|
/* Restore PCI cmd register */
|
|
pci_write_config_word(phba->pcidev, PCI_COMMAND, cfg_value);
|
|
|
|
/* Initialize relevant SLI info */
|
|
for (i = 0; i < psli->num_rings; i++) {
|
|
pring = &psli->ring[i];
|
|
pring->flag = 0;
|
|
pring->rspidx = 0;
|
|
pring->next_cmdidx = 0;
|
|
pring->local_getidx = 0;
|
|
pring->cmdidx = 0;
|
|
pring->missbufcnt = 0;
|
|
}
|
|
|
|
phba->link_state = LPFC_WARM_START;
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
lpfc_sli_brdrestart(struct lpfc_hba *phba)
|
|
{
|
|
MAILBOX_t *mb;
|
|
struct lpfc_sli *psli;
|
|
uint16_t skip_post;
|
|
volatile uint32_t word0;
|
|
void __iomem *to_slim;
|
|
|
|
spin_lock_irq(&phba->hbalock);
|
|
|
|
psli = &phba->sli;
|
|
|
|
/* Restart HBA */
|
|
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
|
|
"0337 Restart HBA Data: x%x x%x\n",
|
|
phba->pport->port_state, psli->sli_flag);
|
|
|
|
word0 = 0;
|
|
mb = (MAILBOX_t *) &word0;
|
|
mb->mbxCommand = MBX_RESTART;
|
|
mb->mbxHc = 1;
|
|
|
|
lpfc_reset_barrier(phba);
|
|
|
|
to_slim = phba->MBslimaddr;
|
|
writel(*(uint32_t *) mb, to_slim);
|
|
readl(to_slim); /* flush */
|
|
|
|
/* Only skip post after fc_ffinit is completed */
|
|
if (phba->pport->port_state) {
|
|
skip_post = 1;
|
|
word0 = 1; /* This is really setting up word1 */
|
|
} else {
|
|
skip_post = 0;
|
|
word0 = 0; /* This is really setting up word1 */
|
|
}
|
|
to_slim = phba->MBslimaddr + sizeof (uint32_t);
|
|
writel(*(uint32_t *) mb, to_slim);
|
|
readl(to_slim); /* flush */
|
|
|
|
lpfc_sli_brdreset(phba);
|
|
phba->pport->stopped = 0;
|
|
phba->link_state = LPFC_INIT_START;
|
|
|
|
spin_unlock_irq(&phba->hbalock);
|
|
|
|
memset(&psli->lnk_stat_offsets, 0, sizeof(psli->lnk_stat_offsets));
|
|
psli->stats_start = get_seconds();
|
|
|
|
if (skip_post)
|
|
mdelay(100);
|
|
else
|
|
mdelay(2000);
|
|
|
|
lpfc_hba_down_post(phba);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
lpfc_sli_chipset_init(struct lpfc_hba *phba)
|
|
{
|
|
uint32_t status, i = 0;
|
|
|
|
/* Read the HBA Host Status Register */
|
|
status = readl(phba->HSregaddr);
|
|
|
|
/* Check status register to see what current state is */
|
|
i = 0;
|
|
while ((status & (HS_FFRDY | HS_MBRDY)) != (HS_FFRDY | HS_MBRDY)) {
|
|
|
|
/* Check every 100ms for 5 retries, then every 500ms for 5, then
|
|
* every 2.5 sec for 5, then reset board and every 2.5 sec for
|
|
* 4.
|
|
*/
|
|
if (i++ >= 20) {
|
|
/* Adapter failed to init, timeout, status reg
|
|
<status> */
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
|
|
"0436 Adapter failed to init, "
|
|
"timeout, status reg x%x\n", status);
|
|
phba->link_state = LPFC_HBA_ERROR;
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
/* Check to see if any errors occurred during init */
|
|
if (status & HS_FFERM) {
|
|
/* ERROR: During chipset initialization */
|
|
/* Adapter failed to init, chipset, status reg
|
|
<status> */
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
|
|
"0437 Adapter failed to init, "
|
|
"chipset, status reg x%x\n", status);
|
|
phba->link_state = LPFC_HBA_ERROR;
|
|
return -EIO;
|
|
}
|
|
|
|
if (i <= 5) {
|
|
msleep(10);
|
|
} else if (i <= 10) {
|
|
msleep(500);
|
|
} else {
|
|
msleep(2500);
|
|
}
|
|
|
|
if (i == 15) {
|
|
/* Do post */
|
|
phba->pport->port_state = LPFC_VPORT_UNKNOWN;
|
|
lpfc_sli_brdrestart(phba);
|
|
}
|
|
/* Read the HBA Host Status Register */
|
|
status = readl(phba->HSregaddr);
|
|
}
|
|
|
|
/* Check to see if any errors occurred during init */
|
|
if (status & HS_FFERM) {
|
|
/* ERROR: During chipset initialization */
|
|
/* Adapter failed to init, chipset, status reg <status> */
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
|
|
"0438 Adapter failed to init, chipset, "
|
|
"status reg x%x\n", status);
|
|
phba->link_state = LPFC_HBA_ERROR;
|
|
return -EIO;
|
|
}
|
|
|
|
/* Clear all interrupt enable conditions */
|
|
writel(0, phba->HCregaddr);
|
|
readl(phba->HCregaddr); /* flush */
|
|
|
|
/* setup host attn register */
|
|
writel(0xffffffff, phba->HAregaddr);
|
|
readl(phba->HAregaddr); /* flush */
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
lpfc_sli_hbq_count(void)
|
|
{
|
|
return ARRAY_SIZE(lpfc_hbq_defs);
|
|
}
|
|
|
|
static int
|
|
lpfc_sli_hbq_entry_count(void)
|
|
{
|
|
int hbq_count = lpfc_sli_hbq_count();
|
|
int count = 0;
|
|
int i;
|
|
|
|
for (i = 0; i < hbq_count; ++i)
|
|
count += lpfc_hbq_defs[i]->entry_count;
|
|
return count;
|
|
}
|
|
|
|
int
|
|
lpfc_sli_hbq_size(void)
|
|
{
|
|
return lpfc_sli_hbq_entry_count() * sizeof(struct lpfc_hbq_entry);
|
|
}
|
|
|
|
static int
|
|
lpfc_sli_hbq_setup(struct lpfc_hba *phba)
|
|
{
|
|
int hbq_count = lpfc_sli_hbq_count();
|
|
LPFC_MBOXQ_t *pmb;
|
|
MAILBOX_t *pmbox;
|
|
uint32_t hbqno;
|
|
uint32_t hbq_entry_index;
|
|
|
|
/* Get a Mailbox buffer to setup mailbox
|
|
* commands for HBA initialization
|
|
*/
|
|
pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
|
|
|
|
if (!pmb)
|
|
return -ENOMEM;
|
|
|
|
pmbox = &pmb->mb;
|
|
|
|
/* Initialize the struct lpfc_sli_hbq structure for each hbq */
|
|
phba->link_state = LPFC_INIT_MBX_CMDS;
|
|
|
|
hbq_entry_index = 0;
|
|
for (hbqno = 0; hbqno < hbq_count; ++hbqno) {
|
|
phba->hbqs[hbqno].next_hbqPutIdx = 0;
|
|
phba->hbqs[hbqno].hbqPutIdx = 0;
|
|
phba->hbqs[hbqno].local_hbqGetIdx = 0;
|
|
phba->hbqs[hbqno].entry_count =
|
|
lpfc_hbq_defs[hbqno]->entry_count;
|
|
lpfc_config_hbq(phba, hbqno, lpfc_hbq_defs[hbqno],
|
|
hbq_entry_index, pmb);
|
|
hbq_entry_index += phba->hbqs[hbqno].entry_count;
|
|
|
|
if (lpfc_sli_issue_mbox(phba, pmb, MBX_POLL) != MBX_SUCCESS) {
|
|
/* Adapter failed to init, mbxCmd <cmd> CFG_RING,
|
|
mbxStatus <status>, ring <num> */
|
|
|
|
lpfc_printf_log(phba, KERN_ERR,
|
|
LOG_SLI | LOG_VPORT,
|
|
"1805 Adapter failed to init. "
|
|
"Data: x%x x%x x%x\n",
|
|
pmbox->mbxCommand,
|
|
pmbox->mbxStatus, hbqno);
|
|
|
|
phba->link_state = LPFC_HBA_ERROR;
|
|
mempool_free(pmb, phba->mbox_mem_pool);
|
|
return ENXIO;
|
|
}
|
|
}
|
|
phba->hbq_count = hbq_count;
|
|
|
|
mempool_free(pmb, phba->mbox_mem_pool);
|
|
|
|
/* Initially populate or replenish the HBQs */
|
|
for (hbqno = 0; hbqno < hbq_count; ++hbqno) {
|
|
if (lpfc_sli_hbqbuf_init_hbqs(phba, hbqno))
|
|
return -ENOMEM;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
lpfc_do_config_port(struct lpfc_hba *phba, int sli_mode)
|
|
{
|
|
LPFC_MBOXQ_t *pmb;
|
|
uint32_t resetcount = 0, rc = 0, done = 0;
|
|
|
|
pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
|
|
if (!pmb) {
|
|
phba->link_state = LPFC_HBA_ERROR;
|
|
return -ENOMEM;
|
|
}
|
|
|
|
phba->sli_rev = sli_mode;
|
|
while (resetcount < 2 && !done) {
|
|
spin_lock_irq(&phba->hbalock);
|
|
phba->sli.sli_flag |= LPFC_SLI_MBOX_ACTIVE;
|
|
spin_unlock_irq(&phba->hbalock);
|
|
phba->pport->port_state = LPFC_VPORT_UNKNOWN;
|
|
lpfc_sli_brdrestart(phba);
|
|
msleep(2500);
|
|
rc = lpfc_sli_chipset_init(phba);
|
|
if (rc)
|
|
break;
|
|
|
|
spin_lock_irq(&phba->hbalock);
|
|
phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
|
|
spin_unlock_irq(&phba->hbalock);
|
|
resetcount++;
|
|
|
|
/* Call pre CONFIG_PORT mailbox command initialization. A
|
|
* value of 0 means the call was successful. Any other
|
|
* nonzero value is a failure, but if ERESTART is returned,
|
|
* the driver may reset the HBA and try again.
|
|
*/
|
|
rc = lpfc_config_port_prep(phba);
|
|
if (rc == -ERESTART) {
|
|
phba->link_state = LPFC_LINK_UNKNOWN;
|
|
continue;
|
|
} else if (rc) {
|
|
break;
|
|
}
|
|
|
|
phba->link_state = LPFC_INIT_MBX_CMDS;
|
|
lpfc_config_port(phba, pmb);
|
|
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
|
|
if (rc != MBX_SUCCESS) {
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
|
|
"0442 Adapter failed to init, mbxCmd x%x "
|
|
"CONFIG_PORT, mbxStatus x%x Data: x%x\n",
|
|
pmb->mb.mbxCommand, pmb->mb.mbxStatus, 0);
|
|
spin_lock_irq(&phba->hbalock);
|
|
phba->sli.sli_flag &= ~LPFC_SLI2_ACTIVE;
|
|
spin_unlock_irq(&phba->hbalock);
|
|
rc = -ENXIO;
|
|
} else {
|
|
done = 1;
|
|
phba->max_vpi = (phba->max_vpi &&
|
|
pmb->mb.un.varCfgPort.gmv) != 0
|
|
? pmb->mb.un.varCfgPort.max_vpi
|
|
: 0;
|
|
}
|
|
}
|
|
|
|
if (!done) {
|
|
rc = -EINVAL;
|
|
goto do_prep_failed;
|
|
}
|
|
|
|
if ((pmb->mb.un.varCfgPort.sli_mode == 3) &&
|
|
(!pmb->mb.un.varCfgPort.cMA)) {
|
|
rc = -ENXIO;
|
|
goto do_prep_failed;
|
|
}
|
|
return rc;
|
|
|
|
do_prep_failed:
|
|
mempool_free(pmb, phba->mbox_mem_pool);
|
|
return rc;
|
|
}
|
|
|
|
int
|
|
lpfc_sli_hba_setup(struct lpfc_hba *phba)
|
|
{
|
|
uint32_t rc;
|
|
int mode = 3;
|
|
|
|
switch (lpfc_sli_mode) {
|
|
case 2:
|
|
if (phba->cfg_enable_npiv) {
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_INIT | LOG_VPORT,
|
|
"1824 NPIV enabled: Override lpfc_sli_mode "
|
|
"parameter (%d) to auto (0).\n",
|
|
lpfc_sli_mode);
|
|
break;
|
|
}
|
|
mode = 2;
|
|
break;
|
|
case 0:
|
|
case 3:
|
|
break;
|
|
default:
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_INIT | LOG_VPORT,
|
|
"1819 Unrecognized lpfc_sli_mode "
|
|
"parameter: %d.\n", lpfc_sli_mode);
|
|
|
|
break;
|
|
}
|
|
|
|
rc = lpfc_do_config_port(phba, mode);
|
|
if (rc && lpfc_sli_mode == 3)
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_INIT | LOG_VPORT,
|
|
"1820 Unable to select SLI-3. "
|
|
"Not supported by adapter.\n");
|
|
if (rc && mode != 2)
|
|
rc = lpfc_do_config_port(phba, 2);
|
|
if (rc)
|
|
goto lpfc_sli_hba_setup_error;
|
|
|
|
if (phba->sli_rev == 3) {
|
|
phba->iocb_cmd_size = SLI3_IOCB_CMD_SIZE;
|
|
phba->iocb_rsp_size = SLI3_IOCB_RSP_SIZE;
|
|
phba->sli3_options |= LPFC_SLI3_ENABLED;
|
|
phba->sli3_options |= LPFC_SLI3_HBQ_ENABLED;
|
|
|
|
} else {
|
|
phba->iocb_cmd_size = SLI2_IOCB_CMD_SIZE;
|
|
phba->iocb_rsp_size = SLI2_IOCB_RSP_SIZE;
|
|
phba->sli3_options = 0;
|
|
}
|
|
|
|
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
|
|
"0444 Firmware in SLI %x mode. Max_vpi %d\n",
|
|
phba->sli_rev, phba->max_vpi);
|
|
rc = lpfc_sli_ring_map(phba);
|
|
|
|
if (rc)
|
|
goto lpfc_sli_hba_setup_error;
|
|
|
|
/* Init HBQs */
|
|
|
|
if (phba->sli3_options & LPFC_SLI3_HBQ_ENABLED) {
|
|
rc = lpfc_sli_hbq_setup(phba);
|
|
if (rc)
|
|
goto lpfc_sli_hba_setup_error;
|
|
}
|
|
|
|
phba->sli.sli_flag |= LPFC_PROCESS_LA;
|
|
|
|
rc = lpfc_config_port_post(phba);
|
|
if (rc)
|
|
goto lpfc_sli_hba_setup_error;
|
|
|
|
return rc;
|
|
|
|
lpfc_sli_hba_setup_error:
|
|
phba->link_state = LPFC_HBA_ERROR;
|
|
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
|
|
"0445 Firmware initialization failed\n");
|
|
return rc;
|
|
}
|
|
|
|
/*! lpfc_mbox_timeout
|
|
*
|
|
* \pre
|
|
* \post
|
|
* \param hba Pointer to per struct lpfc_hba structure
|
|
* \param l1 Pointer to the driver's mailbox queue.
|
|
* \return
|
|
* void
|
|
*
|
|
* \b Description:
|
|
*
|
|
* This routine handles mailbox timeout events at timer interrupt context.
|
|
*/
|
|
void
|
|
lpfc_mbox_timeout(unsigned long ptr)
|
|
{
|
|
struct lpfc_hba *phba = (struct lpfc_hba *) ptr;
|
|
unsigned long iflag;
|
|
uint32_t tmo_posted;
|
|
|
|
spin_lock_irqsave(&phba->pport->work_port_lock, iflag);
|
|
tmo_posted = phba->pport->work_port_events & WORKER_MBOX_TMO;
|
|
if (!tmo_posted)
|
|
phba->pport->work_port_events |= WORKER_MBOX_TMO;
|
|
spin_unlock_irqrestore(&phba->pport->work_port_lock, iflag);
|
|
|
|
if (!tmo_posted) {
|
|
spin_lock_irqsave(&phba->hbalock, iflag);
|
|
if (phba->work_wait)
|
|
lpfc_worker_wake_up(phba);
|
|
spin_unlock_irqrestore(&phba->hbalock, iflag);
|
|
}
|
|
}
|
|
|
|
void
|
|
lpfc_mbox_timeout_handler(struct lpfc_hba *phba)
|
|
{
|
|
LPFC_MBOXQ_t *pmbox = phba->sli.mbox_active;
|
|
MAILBOX_t *mb = &pmbox->mb;
|
|
struct lpfc_sli *psli = &phba->sli;
|
|
struct lpfc_sli_ring *pring;
|
|
|
|
if (!(phba->pport->work_port_events & WORKER_MBOX_TMO)) {
|
|
return;
|
|
}
|
|
|
|
/* Mbox cmd <mbxCommand> timeout */
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
|
|
"0310 Mailbox command x%x timeout Data: x%x x%x x%p\n",
|
|
mb->mbxCommand,
|
|
phba->pport->port_state,
|
|
phba->sli.sli_flag,
|
|
phba->sli.mbox_active);
|
|
|
|
/* Setting state unknown so lpfc_sli_abort_iocb_ring
|
|
* would get IOCB_ERROR from lpfc_sli_issue_iocb, allowing
|
|
* it to fail all oustanding SCSI IO.
|
|
*/
|
|
spin_lock_irq(&phba->pport->work_port_lock);
|
|
phba->pport->work_port_events &= ~WORKER_MBOX_TMO;
|
|
spin_unlock_irq(&phba->pport->work_port_lock);
|
|
spin_lock_irq(&phba->hbalock);
|
|
phba->link_state = LPFC_LINK_UNKNOWN;
|
|
phba->pport->fc_flag |= FC_ESTABLISH_LINK;
|
|
psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
|
|
spin_unlock_irq(&phba->hbalock);
|
|
|
|
pring = &psli->ring[psli->fcp_ring];
|
|
lpfc_sli_abort_iocb_ring(phba, pring);
|
|
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
|
|
"0316 Resetting board due to mailbox timeout\n");
|
|
/*
|
|
* lpfc_offline calls lpfc_sli_hba_down which will clean up
|
|
* on oustanding mailbox commands.
|
|
*/
|
|
lpfc_offline_prep(phba);
|
|
lpfc_offline(phba);
|
|
lpfc_sli_brdrestart(phba);
|
|
if (lpfc_online(phba) == 0) /* Initialize the HBA */
|
|
mod_timer(&phba->fc_estabtmo, jiffies + HZ * 60);
|
|
lpfc_unblock_mgmt_io(phba);
|
|
return;
|
|
}
|
|
|
|
int
|
|
lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
|
|
{
|
|
MAILBOX_t *mb;
|
|
struct lpfc_sli *psli = &phba->sli;
|
|
uint32_t status, evtctr;
|
|
uint32_t ha_copy;
|
|
int i;
|
|
unsigned long drvr_flag = 0;
|
|
volatile uint32_t word0, ldata;
|
|
void __iomem *to_slim;
|
|
|
|
if (pmbox->mbox_cmpl && pmbox->mbox_cmpl != lpfc_sli_def_mbox_cmpl &&
|
|
pmbox->mbox_cmpl != lpfc_sli_wake_mbox_wait) {
|
|
if(!pmbox->vport) {
|
|
lpfc_printf_log(phba, KERN_ERR,
|
|
LOG_MBOX | LOG_VPORT,
|
|
"1806 Mbox x%x failed. No vport\n",
|
|
pmbox->mb.mbxCommand);
|
|
dump_stack();
|
|
return MBXERR_ERROR;
|
|
}
|
|
}
|
|
|
|
|
|
/* If the PCI channel is in offline state, do not post mbox. */
|
|
if (unlikely(pci_channel_offline(phba->pcidev)))
|
|
return MBX_NOT_FINISHED;
|
|
|
|
spin_lock_irqsave(&phba->hbalock, drvr_flag);
|
|
psli = &phba->sli;
|
|
|
|
|
|
mb = &pmbox->mb;
|
|
status = MBX_SUCCESS;
|
|
|
|
if (phba->link_state == LPFC_HBA_ERROR) {
|
|
spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
|
|
|
|
/* Mbox command <mbxCommand> cannot issue */
|
|
LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag)
|
|
return MBX_NOT_FINISHED;
|
|
}
|
|
|
|
if (mb->mbxCommand != MBX_KILL_BOARD && flag & MBX_NOWAIT &&
|
|
!(readl(phba->HCregaddr) & HC_MBINT_ENA)) {
|
|
spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
|
|
LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag)
|
|
return MBX_NOT_FINISHED;
|
|
}
|
|
|
|
if (psli->sli_flag & LPFC_SLI_MBOX_ACTIVE) {
|
|
/* Polling for a mbox command when another one is already active
|
|
* is not allowed in SLI. Also, the driver must have established
|
|
* SLI2 mode to queue and process multiple mbox commands.
|
|
*/
|
|
|
|
if (flag & MBX_POLL) {
|
|
spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
|
|
|
|
/* Mbox command <mbxCommand> cannot issue */
|
|
LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag);
|
|
return MBX_NOT_FINISHED;
|
|
}
|
|
|
|
if (!(psli->sli_flag & LPFC_SLI2_ACTIVE)) {
|
|
spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
|
|
/* Mbox command <mbxCommand> cannot issue */
|
|
LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag);
|
|
return MBX_NOT_FINISHED;
|
|
}
|
|
|
|
/* Another mailbox command is still being processed, queue this
|
|
* command to be processed later.
|
|
*/
|
|
lpfc_mbox_put(phba, pmbox);
|
|
|
|
/* Mbox cmd issue - BUSY */
|
|
lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
|
|
"(%d):0308 Mbox cmd issue - BUSY Data: "
|
|
"x%x x%x x%x x%x\n",
|
|
pmbox->vport ? pmbox->vport->vpi : 0xffffff,
|
|
mb->mbxCommand, phba->pport->port_state,
|
|
psli->sli_flag, flag);
|
|
|
|
psli->slistat.mbox_busy++;
|
|
spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
|
|
|
|
if (pmbox->vport) {
|
|
lpfc_debugfs_disc_trc(pmbox->vport,
|
|
LPFC_DISC_TRC_MBOX_VPORT,
|
|
"MBOX Bsy vport: cmd:x%x mb:x%x x%x",
|
|
(uint32_t)mb->mbxCommand,
|
|
mb->un.varWords[0], mb->un.varWords[1]);
|
|
}
|
|
else {
|
|
lpfc_debugfs_disc_trc(phba->pport,
|
|
LPFC_DISC_TRC_MBOX,
|
|
"MBOX Bsy: cmd:x%x mb:x%x x%x",
|
|
(uint32_t)mb->mbxCommand,
|
|
mb->un.varWords[0], mb->un.varWords[1]);
|
|
}
|
|
|
|
return MBX_BUSY;
|
|
}
|
|
|
|
psli->sli_flag |= LPFC_SLI_MBOX_ACTIVE;
|
|
|
|
/* If we are not polling, we MUST be in SLI2 mode */
|
|
if (flag != MBX_POLL) {
|
|
if (!(psli->sli_flag & LPFC_SLI2_ACTIVE) &&
|
|
(mb->mbxCommand != MBX_KILL_BOARD)) {
|
|
psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
|
|
spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
|
|
/* Mbox command <mbxCommand> cannot issue */
|
|
LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag);
|
|
return MBX_NOT_FINISHED;
|
|
}
|
|
/* timeout active mbox command */
|
|
mod_timer(&psli->mbox_tmo, (jiffies +
|
|
(HZ * lpfc_mbox_tmo_val(phba, mb->mbxCommand))));
|
|
}
|
|
|
|
/* Mailbox cmd <cmd> issue */
|
|
lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
|
|
"(%d):0309 Mailbox cmd x%x issue Data: x%x x%x "
|
|
"x%x\n",
|
|
pmbox->vport ? pmbox->vport->vpi : 0,
|
|
mb->mbxCommand, phba->pport->port_state,
|
|
psli->sli_flag, flag);
|
|
|
|
if (mb->mbxCommand != MBX_HEARTBEAT) {
|
|
if (pmbox->vport) {
|
|
lpfc_debugfs_disc_trc(pmbox->vport,
|
|
LPFC_DISC_TRC_MBOX_VPORT,
|
|
"MBOX Send vport: cmd:x%x mb:x%x x%x",
|
|
(uint32_t)mb->mbxCommand,
|
|
mb->un.varWords[0], mb->un.varWords[1]);
|
|
}
|
|
else {
|
|
lpfc_debugfs_disc_trc(phba->pport,
|
|
LPFC_DISC_TRC_MBOX,
|
|
"MBOX Send: cmd:x%x mb:x%x x%x",
|
|
(uint32_t)mb->mbxCommand,
|
|
mb->un.varWords[0], mb->un.varWords[1]);
|
|
}
|
|
}
|
|
|
|
psli->slistat.mbox_cmd++;
|
|
evtctr = psli->slistat.mbox_event;
|
|
|
|
/* next set own bit for the adapter and copy over command word */
|
|
mb->mbxOwner = OWN_CHIP;
|
|
|
|
if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
|
|
/* First copy command data to host SLIM area */
|
|
lpfc_sli_pcimem_bcopy(mb, &phba->slim2p->mbx, MAILBOX_CMD_SIZE);
|
|
} else {
|
|
if (mb->mbxCommand == MBX_CONFIG_PORT) {
|
|
/* copy command data into host mbox for cmpl */
|
|
lpfc_sli_pcimem_bcopy(mb, &phba->slim2p->mbx,
|
|
MAILBOX_CMD_SIZE);
|
|
}
|
|
|
|
/* First copy mbox command data to HBA SLIM, skip past first
|
|
word */
|
|
to_slim = phba->MBslimaddr + sizeof (uint32_t);
|
|
lpfc_memcpy_to_slim(to_slim, &mb->un.varWords[0],
|
|
MAILBOX_CMD_SIZE - sizeof (uint32_t));
|
|
|
|
/* Next copy over first word, with mbxOwner set */
|
|
ldata = *((volatile uint32_t *)mb);
|
|
to_slim = phba->MBslimaddr;
|
|
writel(ldata, to_slim);
|
|
readl(to_slim); /* flush */
|
|
|
|
if (mb->mbxCommand == MBX_CONFIG_PORT) {
|
|
/* switch over to host mailbox */
|
|
psli->sli_flag |= LPFC_SLI2_ACTIVE;
|
|
}
|
|
}
|
|
|
|
wmb();
|
|
/* interrupt board to doit right away */
|
|
writel(CA_MBATT, phba->CAregaddr);
|
|
readl(phba->CAregaddr); /* flush */
|
|
|
|
switch (flag) {
|
|
case MBX_NOWAIT:
|
|
/* Don't wait for it to finish, just return */
|
|
psli->mbox_active = pmbox;
|
|
break;
|
|
|
|
case MBX_POLL:
|
|
psli->mbox_active = NULL;
|
|
if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
|
|
/* First read mbox status word */
|
|
word0 = *((volatile uint32_t *)&phba->slim2p->mbx);
|
|
word0 = le32_to_cpu(word0);
|
|
} else {
|
|
/* First read mbox status word */
|
|
word0 = readl(phba->MBslimaddr);
|
|
}
|
|
|
|
/* Read the HBA Host Attention Register */
|
|
ha_copy = readl(phba->HAregaddr);
|
|
|
|
i = lpfc_mbox_tmo_val(phba, mb->mbxCommand);
|
|
i *= 1000; /* Convert to ms */
|
|
|
|
/* Wait for command to complete */
|
|
while (((word0 & OWN_CHIP) == OWN_CHIP) ||
|
|
(!(ha_copy & HA_MBATT) &&
|
|
(phba->link_state > LPFC_WARM_START))) {
|
|
if (i-- <= 0) {
|
|
psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
|
|
spin_unlock_irqrestore(&phba->hbalock,
|
|
drvr_flag);
|
|
return MBX_NOT_FINISHED;
|
|
}
|
|
|
|
/* Check if we took a mbox interrupt while we were
|
|
polling */
|
|
if (((word0 & OWN_CHIP) != OWN_CHIP)
|
|
&& (evtctr != psli->slistat.mbox_event))
|
|
break;
|
|
|
|
spin_unlock_irqrestore(&phba->hbalock,
|
|
drvr_flag);
|
|
|
|
msleep(1);
|
|
|
|
spin_lock_irqsave(&phba->hbalock, drvr_flag);
|
|
|
|
if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
|
|
/* First copy command data */
|
|
word0 = *((volatile uint32_t *)
|
|
&phba->slim2p->mbx);
|
|
word0 = le32_to_cpu(word0);
|
|
if (mb->mbxCommand == MBX_CONFIG_PORT) {
|
|
MAILBOX_t *slimmb;
|
|
volatile uint32_t slimword0;
|
|
/* Check real SLIM for any errors */
|
|
slimword0 = readl(phba->MBslimaddr);
|
|
slimmb = (MAILBOX_t *) & slimword0;
|
|
if (((slimword0 & OWN_CHIP) != OWN_CHIP)
|
|
&& slimmb->mbxStatus) {
|
|
psli->sli_flag &=
|
|
~LPFC_SLI2_ACTIVE;
|
|
word0 = slimword0;
|
|
}
|
|
}
|
|
} else {
|
|
/* First copy command data */
|
|
word0 = readl(phba->MBslimaddr);
|
|
}
|
|
/* Read the HBA Host Attention Register */
|
|
ha_copy = readl(phba->HAregaddr);
|
|
}
|
|
|
|
if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
|
|
/* copy results back to user */
|
|
lpfc_sli_pcimem_bcopy(&phba->slim2p->mbx, mb,
|
|
MAILBOX_CMD_SIZE);
|
|
} else {
|
|
/* First copy command data */
|
|
lpfc_memcpy_from_slim(mb, phba->MBslimaddr,
|
|
MAILBOX_CMD_SIZE);
|
|
if ((mb->mbxCommand == MBX_DUMP_MEMORY) &&
|
|
pmbox->context2) {
|
|
lpfc_memcpy_from_slim((void *)pmbox->context2,
|
|
phba->MBslimaddr + DMP_RSP_OFFSET,
|
|
mb->un.varDmp.word_cnt);
|
|
}
|
|
}
|
|
|
|
writel(HA_MBATT, phba->HAregaddr);
|
|
readl(phba->HAregaddr); /* flush */
|
|
|
|
psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
|
|
status = mb->mbxStatus;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
* Caller needs to hold lock.
|
|
*/
|
|
static void
|
|
__lpfc_sli_ringtx_put(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
|
|
struct lpfc_iocbq *piocb)
|
|
{
|
|
/* Insert the caller's iocb in the txq tail for later processing. */
|
|
list_add_tail(&piocb->list, &pring->txq);
|
|
pring->txq_cnt++;
|
|
}
|
|
|
|
static struct lpfc_iocbq *
|
|
lpfc_sli_next_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
|
|
struct lpfc_iocbq **piocb)
|
|
{
|
|
struct lpfc_iocbq * nextiocb;
|
|
|
|
nextiocb = lpfc_sli_ringtx_get(phba, pring);
|
|
if (!nextiocb) {
|
|
nextiocb = *piocb;
|
|
*piocb = NULL;
|
|
}
|
|
|
|
return nextiocb;
|
|
}
|
|
|
|
/*
|
|
* Lockless version of lpfc_sli_issue_iocb.
|
|
*/
|
|
static int
|
|
__lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
|
|
struct lpfc_iocbq *piocb, uint32_t flag)
|
|
{
|
|
struct lpfc_iocbq *nextiocb;
|
|
IOCB_t *iocb;
|
|
|
|
if (piocb->iocb_cmpl && (!piocb->vport) &&
|
|
(piocb->iocb.ulpCommand != CMD_ABORT_XRI_CN) &&
|
|
(piocb->iocb.ulpCommand != CMD_CLOSE_XRI_CN)) {
|
|
lpfc_printf_log(phba, KERN_ERR,
|
|
LOG_SLI | LOG_VPORT,
|
|
"1807 IOCB x%x failed. No vport\n",
|
|
piocb->iocb.ulpCommand);
|
|
dump_stack();
|
|
return IOCB_ERROR;
|
|
}
|
|
|
|
|
|
/* If the PCI channel is in offline state, do not post iocbs. */
|
|
if (unlikely(pci_channel_offline(phba->pcidev)))
|
|
return IOCB_ERROR;
|
|
|
|
/*
|
|
* We should never get an IOCB if we are in a < LINK_DOWN state
|
|
*/
|
|
if (unlikely(phba->link_state < LPFC_LINK_DOWN))
|
|
return IOCB_ERROR;
|
|
|
|
/*
|
|
* Check to see if we are blocking IOCB processing because of a
|
|
* outstanding event.
|
|
*/
|
|
if (unlikely(pring->flag & LPFC_STOP_IOCB_EVENT))
|
|
goto iocb_busy;
|
|
|
|
if (unlikely(phba->link_state == LPFC_LINK_DOWN)) {
|
|
/*
|
|
* Only CREATE_XRI, CLOSE_XRI, and QUE_RING_BUF
|
|
* can be issued if the link is not up.
|
|
*/
|
|
switch (piocb->iocb.ulpCommand) {
|
|
case CMD_QUE_RING_BUF_CN:
|
|
case CMD_QUE_RING_BUF64_CN:
|
|
/*
|
|
* For IOCBs, like QUE_RING_BUF, that have no rsp ring
|
|
* completion, iocb_cmpl MUST be 0.
|
|
*/
|
|
if (piocb->iocb_cmpl)
|
|
piocb->iocb_cmpl = NULL;
|
|
/*FALLTHROUGH*/
|
|
case CMD_CREATE_XRI_CR:
|
|
case CMD_CLOSE_XRI_CN:
|
|
case CMD_CLOSE_XRI_CX:
|
|
break;
|
|
default:
|
|
goto iocb_busy;
|
|
}
|
|
|
|
/*
|
|
* For FCP commands, we must be in a state where we can process link
|
|
* attention events.
|
|
*/
|
|
} else if (unlikely(pring->ringno == phba->sli.fcp_ring &&
|
|
!(phba->sli.sli_flag & LPFC_PROCESS_LA))) {
|
|
goto iocb_busy;
|
|
}
|
|
|
|
while ((iocb = lpfc_sli_next_iocb_slot(phba, pring)) &&
|
|
(nextiocb = lpfc_sli_next_iocb(phba, pring, &piocb)))
|
|
lpfc_sli_submit_iocb(phba, pring, iocb, nextiocb);
|
|
|
|
if (iocb)
|
|
lpfc_sli_update_ring(phba, pring);
|
|
else
|
|
lpfc_sli_update_full_ring(phba, pring);
|
|
|
|
if (!piocb)
|
|
return IOCB_SUCCESS;
|
|
|
|
goto out_busy;
|
|
|
|
iocb_busy:
|
|
pring->stats.iocb_cmd_delay++;
|
|
|
|
out_busy:
|
|
|
|
if (!(flag & SLI_IOCB_RET_IOCB)) {
|
|
__lpfc_sli_ringtx_put(phba, pring, piocb);
|
|
return IOCB_SUCCESS;
|
|
}
|
|
|
|
return IOCB_BUSY;
|
|
}
|
|
|
|
|
|
int
|
|
lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
|
|
struct lpfc_iocbq *piocb, uint32_t flag)
|
|
{
|
|
unsigned long iflags;
|
|
int rc;
|
|
|
|
spin_lock_irqsave(&phba->hbalock, iflags);
|
|
rc = __lpfc_sli_issue_iocb(phba, pring, piocb, flag);
|
|
spin_unlock_irqrestore(&phba->hbalock, iflags);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int
|
|
lpfc_extra_ring_setup( struct lpfc_hba *phba)
|
|
{
|
|
struct lpfc_sli *psli;
|
|
struct lpfc_sli_ring *pring;
|
|
|
|
psli = &phba->sli;
|
|
|
|
/* Adjust cmd/rsp ring iocb entries more evenly */
|
|
|
|
/* Take some away from the FCP ring */
|
|
pring = &psli->ring[psli->fcp_ring];
|
|
pring->numCiocb -= SLI2_IOCB_CMD_R1XTRA_ENTRIES;
|
|
pring->numRiocb -= SLI2_IOCB_RSP_R1XTRA_ENTRIES;
|
|
pring->numCiocb -= SLI2_IOCB_CMD_R3XTRA_ENTRIES;
|
|
pring->numRiocb -= SLI2_IOCB_RSP_R3XTRA_ENTRIES;
|
|
|
|
/* and give them to the extra ring */
|
|
pring = &psli->ring[psli->extra_ring];
|
|
|
|
pring->numCiocb += SLI2_IOCB_CMD_R1XTRA_ENTRIES;
|
|
pring->numRiocb += SLI2_IOCB_RSP_R1XTRA_ENTRIES;
|
|
pring->numCiocb += SLI2_IOCB_CMD_R3XTRA_ENTRIES;
|
|
pring->numRiocb += SLI2_IOCB_RSP_R3XTRA_ENTRIES;
|
|
|
|
/* Setup default profile for this ring */
|
|
pring->iotag_max = 4096;
|
|
pring->num_mask = 1;
|
|
pring->prt[0].profile = 0; /* Mask 0 */
|
|
pring->prt[0].rctl = phba->cfg_multi_ring_rctl;
|
|
pring->prt[0].type = phba->cfg_multi_ring_type;
|
|
pring->prt[0].lpfc_sli_rcv_unsol_event = NULL;
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
lpfc_sli_async_event_handler(struct lpfc_hba * phba,
|
|
struct lpfc_sli_ring * pring, struct lpfc_iocbq * iocbq)
|
|
{
|
|
IOCB_t *icmd;
|
|
uint16_t evt_code;
|
|
uint16_t temp;
|
|
struct temp_event temp_event_data;
|
|
struct Scsi_Host *shost;
|
|
|
|
icmd = &iocbq->iocb;
|
|
evt_code = icmd->un.asyncstat.evt_code;
|
|
temp = icmd->ulpContext;
|
|
|
|
if ((evt_code != ASYNC_TEMP_WARN) &&
|
|
(evt_code != ASYNC_TEMP_SAFE)) {
|
|
lpfc_printf_log(phba,
|
|
KERN_ERR,
|
|
LOG_SLI,
|
|
"0327 Ring %d handler: unexpected ASYNC_STATUS"
|
|
" evt_code 0x%x\n",
|
|
pring->ringno,
|
|
icmd->un.asyncstat.evt_code);
|
|
return;
|
|
}
|
|
temp_event_data.data = (uint32_t)temp;
|
|
temp_event_data.event_type = FC_REG_TEMPERATURE_EVENT;
|
|
if (evt_code == ASYNC_TEMP_WARN) {
|
|
temp_event_data.event_code = LPFC_THRESHOLD_TEMP;
|
|
lpfc_printf_log(phba,
|
|
KERN_WARNING,
|
|
LOG_TEMP,
|
|
"0339 Adapter is very hot, please take "
|
|
"corrective action. temperature : %d Celsius\n",
|
|
temp);
|
|
}
|
|
if (evt_code == ASYNC_TEMP_SAFE) {
|
|
temp_event_data.event_code = LPFC_NORMAL_TEMP;
|
|
lpfc_printf_log(phba,
|
|
KERN_INFO,
|
|
LOG_TEMP,
|
|
"0340 Adapter temperature is OK now. "
|
|
"temperature : %d Celsius\n",
|
|
temp);
|
|
}
|
|
|
|
/* Send temperature change event to applications */
|
|
shost = lpfc_shost_from_vport(phba->pport);
|
|
fc_host_post_vendor_event(shost, fc_get_event_number(),
|
|
sizeof(temp_event_data), (char *) &temp_event_data,
|
|
SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX);
|
|
|
|
}
|
|
|
|
|
|
int
|
|
lpfc_sli_setup(struct lpfc_hba *phba)
|
|
{
|
|
int i, totiocbsize = 0;
|
|
struct lpfc_sli *psli = &phba->sli;
|
|
struct lpfc_sli_ring *pring;
|
|
|
|
psli->num_rings = MAX_CONFIGURED_RINGS;
|
|
psli->sli_flag = 0;
|
|
psli->fcp_ring = LPFC_FCP_RING;
|
|
psli->next_ring = LPFC_FCP_NEXT_RING;
|
|
psli->extra_ring = LPFC_EXTRA_RING;
|
|
|
|
psli->iocbq_lookup = NULL;
|
|
psli->iocbq_lookup_len = 0;
|
|
psli->last_iotag = 0;
|
|
|
|
for (i = 0; i < psli->num_rings; i++) {
|
|
pring = &psli->ring[i];
|
|
switch (i) {
|
|
case LPFC_FCP_RING: /* ring 0 - FCP */
|
|
/* numCiocb and numRiocb are used in config_port */
|
|
pring->numCiocb = SLI2_IOCB_CMD_R0_ENTRIES;
|
|
pring->numRiocb = SLI2_IOCB_RSP_R0_ENTRIES;
|
|
pring->numCiocb += SLI2_IOCB_CMD_R1XTRA_ENTRIES;
|
|
pring->numRiocb += SLI2_IOCB_RSP_R1XTRA_ENTRIES;
|
|
pring->numCiocb += SLI2_IOCB_CMD_R3XTRA_ENTRIES;
|
|
pring->numRiocb += SLI2_IOCB_RSP_R3XTRA_ENTRIES;
|
|
pring->sizeCiocb = (phba->sli_rev == 3) ?
|
|
SLI3_IOCB_CMD_SIZE :
|
|
SLI2_IOCB_CMD_SIZE;
|
|
pring->sizeRiocb = (phba->sli_rev == 3) ?
|
|
SLI3_IOCB_RSP_SIZE :
|
|
SLI2_IOCB_RSP_SIZE;
|
|
pring->iotag_ctr = 0;
|
|
pring->iotag_max =
|
|
(phba->cfg_hba_queue_depth * 2);
|
|
pring->fast_iotag = pring->iotag_max;
|
|
pring->num_mask = 0;
|
|
break;
|
|
case LPFC_EXTRA_RING: /* ring 1 - EXTRA */
|
|
/* numCiocb and numRiocb are used in config_port */
|
|
pring->numCiocb = SLI2_IOCB_CMD_R1_ENTRIES;
|
|
pring->numRiocb = SLI2_IOCB_RSP_R1_ENTRIES;
|
|
pring->sizeCiocb = (phba->sli_rev == 3) ?
|
|
SLI3_IOCB_CMD_SIZE :
|
|
SLI2_IOCB_CMD_SIZE;
|
|
pring->sizeRiocb = (phba->sli_rev == 3) ?
|
|
SLI3_IOCB_RSP_SIZE :
|
|
SLI2_IOCB_RSP_SIZE;
|
|
pring->iotag_max = phba->cfg_hba_queue_depth;
|
|
pring->num_mask = 0;
|
|
break;
|
|
case LPFC_ELS_RING: /* ring 2 - ELS / CT */
|
|
/* numCiocb and numRiocb are used in config_port */
|
|
pring->numCiocb = SLI2_IOCB_CMD_R2_ENTRIES;
|
|
pring->numRiocb = SLI2_IOCB_RSP_R2_ENTRIES;
|
|
pring->sizeCiocb = (phba->sli_rev == 3) ?
|
|
SLI3_IOCB_CMD_SIZE :
|
|
SLI2_IOCB_CMD_SIZE;
|
|
pring->sizeRiocb = (phba->sli_rev == 3) ?
|
|
SLI3_IOCB_RSP_SIZE :
|
|
SLI2_IOCB_RSP_SIZE;
|
|
pring->fast_iotag = 0;
|
|
pring->iotag_ctr = 0;
|
|
pring->iotag_max = 4096;
|
|
pring->lpfc_sli_rcv_async_status =
|
|
lpfc_sli_async_event_handler;
|
|
pring->num_mask = 4;
|
|
pring->prt[0].profile = 0; /* Mask 0 */
|
|
pring->prt[0].rctl = FC_ELS_REQ;
|
|
pring->prt[0].type = FC_ELS_DATA;
|
|
pring->prt[0].lpfc_sli_rcv_unsol_event =
|
|
lpfc_els_unsol_event;
|
|
pring->prt[1].profile = 0; /* Mask 1 */
|
|
pring->prt[1].rctl = FC_ELS_RSP;
|
|
pring->prt[1].type = FC_ELS_DATA;
|
|
pring->prt[1].lpfc_sli_rcv_unsol_event =
|
|
lpfc_els_unsol_event;
|
|
pring->prt[2].profile = 0; /* Mask 2 */
|
|
/* NameServer Inquiry */
|
|
pring->prt[2].rctl = FC_UNSOL_CTL;
|
|
/* NameServer */
|
|
pring->prt[2].type = FC_COMMON_TRANSPORT_ULP;
|
|
pring->prt[2].lpfc_sli_rcv_unsol_event =
|
|
lpfc_ct_unsol_event;
|
|
pring->prt[3].profile = 0; /* Mask 3 */
|
|
/* NameServer response */
|
|
pring->prt[3].rctl = FC_SOL_CTL;
|
|
/* NameServer */
|
|
pring->prt[3].type = FC_COMMON_TRANSPORT_ULP;
|
|
pring->prt[3].lpfc_sli_rcv_unsol_event =
|
|
lpfc_ct_unsol_event;
|
|
break;
|
|
}
|
|
totiocbsize += (pring->numCiocb * pring->sizeCiocb) +
|
|
(pring->numRiocb * pring->sizeRiocb);
|
|
}
|
|
if (totiocbsize > MAX_SLIM_IOCB_SIZE) {
|
|
/* Too many cmd / rsp ring entries in SLI2 SLIM */
|
|
printk(KERN_ERR "%d:0462 Too many cmd / rsp ring entries in "
|
|
"SLI2 SLIM Data: x%x x%lx\n",
|
|
phba->brd_no, totiocbsize,
|
|
(unsigned long) MAX_SLIM_IOCB_SIZE);
|
|
}
|
|
if (phba->cfg_multi_ring_support == 2)
|
|
lpfc_extra_ring_setup(phba);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
lpfc_sli_queue_setup(struct lpfc_hba *phba)
|
|
{
|
|
struct lpfc_sli *psli;
|
|
struct lpfc_sli_ring *pring;
|
|
int i;
|
|
|
|
psli = &phba->sli;
|
|
spin_lock_irq(&phba->hbalock);
|
|
INIT_LIST_HEAD(&psli->mboxq);
|
|
INIT_LIST_HEAD(&psli->mboxq_cmpl);
|
|
/* Initialize list headers for txq and txcmplq as double linked lists */
|
|
for (i = 0; i < psli->num_rings; i++) {
|
|
pring = &psli->ring[i];
|
|
pring->ringno = i;
|
|
pring->next_cmdidx = 0;
|
|
pring->local_getidx = 0;
|
|
pring->cmdidx = 0;
|
|
INIT_LIST_HEAD(&pring->txq);
|
|
INIT_LIST_HEAD(&pring->txcmplq);
|
|
INIT_LIST_HEAD(&pring->iocb_continueq);
|
|
INIT_LIST_HEAD(&pring->postbufq);
|
|
}
|
|
spin_unlock_irq(&phba->hbalock);
|
|
return 1;
|
|
}
|
|
|
|
int
|
|
lpfc_sli_host_down(struct lpfc_vport *vport)
|
|
{
|
|
LIST_HEAD(completions);
|
|
struct lpfc_hba *phba = vport->phba;
|
|
struct lpfc_sli *psli = &phba->sli;
|
|
struct lpfc_sli_ring *pring;
|
|
struct lpfc_iocbq *iocb, *next_iocb;
|
|
int i;
|
|
unsigned long flags = 0;
|
|
uint16_t prev_pring_flag;
|
|
|
|
lpfc_cleanup_discovery_resources(vport);
|
|
|
|
spin_lock_irqsave(&phba->hbalock, flags);
|
|
for (i = 0; i < psli->num_rings; i++) {
|
|
pring = &psli->ring[i];
|
|
prev_pring_flag = pring->flag;
|
|
if (pring->ringno == LPFC_ELS_RING) /* Only slow rings */
|
|
pring->flag |= LPFC_DEFERRED_RING_EVENT;
|
|
/*
|
|
* Error everything on the txq since these iocbs have not been
|
|
* given to the FW yet.
|
|
*/
|
|
list_for_each_entry_safe(iocb, next_iocb, &pring->txq, list) {
|
|
if (iocb->vport != vport)
|
|
continue;
|
|
list_move_tail(&iocb->list, &completions);
|
|
pring->txq_cnt--;
|
|
}
|
|
|
|
/* Next issue ABTS for everything on the txcmplq */
|
|
list_for_each_entry_safe(iocb, next_iocb, &pring->txcmplq,
|
|
list) {
|
|
if (iocb->vport != vport)
|
|
continue;
|
|
lpfc_sli_issue_abort_iotag(phba, pring, iocb);
|
|
}
|
|
|
|
pring->flag = prev_pring_flag;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&phba->hbalock, flags);
|
|
|
|
while (!list_empty(&completions)) {
|
|
list_remove_head(&completions, iocb, struct lpfc_iocbq, list);
|
|
|
|
if (!iocb->iocb_cmpl)
|
|
lpfc_sli_release_iocbq(phba, iocb);
|
|
else {
|
|
iocb->iocb.ulpStatus = IOSTAT_LOCAL_REJECT;
|
|
iocb->iocb.un.ulpWord[4] = IOERR_SLI_DOWN;
|
|
(iocb->iocb_cmpl) (phba, iocb, iocb);
|
|
}
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
int
|
|
lpfc_sli_hba_down(struct lpfc_hba *phba)
|
|
{
|
|
LIST_HEAD(completions);
|
|
struct lpfc_sli *psli = &phba->sli;
|
|
struct lpfc_sli_ring *pring;
|
|
LPFC_MBOXQ_t *pmb;
|
|
struct lpfc_iocbq *iocb;
|
|
IOCB_t *cmd = NULL;
|
|
int i;
|
|
unsigned long flags = 0;
|
|
|
|
lpfc_hba_down_prep(phba);
|
|
|
|
lpfc_fabric_abort_hba(phba);
|
|
|
|
spin_lock_irqsave(&phba->hbalock, flags);
|
|
for (i = 0; i < psli->num_rings; i++) {
|
|
pring = &psli->ring[i];
|
|
if (pring->ringno == LPFC_ELS_RING) /* Only slow rings */
|
|
pring->flag |= LPFC_DEFERRED_RING_EVENT;
|
|
|
|
/*
|
|
* Error everything on the txq since these iocbs have not been
|
|
* given to the FW yet.
|
|
*/
|
|
list_splice_init(&pring->txq, &completions);
|
|
pring->txq_cnt = 0;
|
|
|
|
}
|
|
spin_unlock_irqrestore(&phba->hbalock, flags);
|
|
|
|
while (!list_empty(&completions)) {
|
|
list_remove_head(&completions, iocb, struct lpfc_iocbq, list);
|
|
cmd = &iocb->iocb;
|
|
|
|
if (!iocb->iocb_cmpl)
|
|
lpfc_sli_release_iocbq(phba, iocb);
|
|
else {
|
|
cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
|
|
cmd->un.ulpWord[4] = IOERR_SLI_DOWN;
|
|
(iocb->iocb_cmpl) (phba, iocb, iocb);
|
|
}
|
|
}
|
|
|
|
/* Return any active mbox cmds */
|
|
del_timer_sync(&psli->mbox_tmo);
|
|
spin_lock_irqsave(&phba->hbalock, flags);
|
|
|
|
spin_lock(&phba->pport->work_port_lock);
|
|
phba->pport->work_port_events &= ~WORKER_MBOX_TMO;
|
|
spin_unlock(&phba->pport->work_port_lock);
|
|
|
|
if (psli->mbox_active) {
|
|
list_add_tail(&psli->mbox_active->list, &completions);
|
|
psli->mbox_active = NULL;
|
|
psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
|
|
}
|
|
|
|
/* Return any pending or completed mbox cmds */
|
|
list_splice_init(&phba->sli.mboxq, &completions);
|
|
list_splice_init(&phba->sli.mboxq_cmpl, &completions);
|
|
INIT_LIST_HEAD(&psli->mboxq);
|
|
INIT_LIST_HEAD(&psli->mboxq_cmpl);
|
|
|
|
spin_unlock_irqrestore(&phba->hbalock, flags);
|
|
|
|
while (!list_empty(&completions)) {
|
|
list_remove_head(&completions, pmb, LPFC_MBOXQ_t, list);
|
|
pmb->mb.mbxStatus = MBX_NOT_FINISHED;
|
|
if (pmb->mbox_cmpl) {
|
|
pmb->mbox_cmpl(phba,pmb);
|
|
}
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
void
|
|
lpfc_sli_pcimem_bcopy(void *srcp, void *destp, uint32_t cnt)
|
|
{
|
|
uint32_t *src = srcp;
|
|
uint32_t *dest = destp;
|
|
uint32_t ldata;
|
|
int i;
|
|
|
|
for (i = 0; i < (int)cnt; i += sizeof (uint32_t)) {
|
|
ldata = *src;
|
|
ldata = le32_to_cpu(ldata);
|
|
*dest = ldata;
|
|
src++;
|
|
dest++;
|
|
}
|
|
}
|
|
|
|
int
|
|
lpfc_sli_ringpostbuf_put(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
|
|
struct lpfc_dmabuf *mp)
|
|
{
|
|
/* Stick struct lpfc_dmabuf at end of postbufq so driver can look it up
|
|
later */
|
|
spin_lock_irq(&phba->hbalock);
|
|
list_add_tail(&mp->list, &pring->postbufq);
|
|
pring->postbufq_cnt++;
|
|
spin_unlock_irq(&phba->hbalock);
|
|
return 0;
|
|
}
|
|
|
|
|
|
struct lpfc_dmabuf *
|
|
lpfc_sli_ringpostbuf_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
|
|
dma_addr_t phys)
|
|
{
|
|
struct lpfc_dmabuf *mp, *next_mp;
|
|
struct list_head *slp = &pring->postbufq;
|
|
|
|
/* Search postbufq, from the begining, looking for a match on phys */
|
|
spin_lock_irq(&phba->hbalock);
|
|
list_for_each_entry_safe(mp, next_mp, &pring->postbufq, list) {
|
|
if (mp->phys == phys) {
|
|
list_del_init(&mp->list);
|
|
pring->postbufq_cnt--;
|
|
spin_unlock_irq(&phba->hbalock);
|
|
return mp;
|
|
}
|
|
}
|
|
|
|
spin_unlock_irq(&phba->hbalock);
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
|
|
"0410 Cannot find virtual addr for mapped buf on "
|
|
"ring %d Data x%llx x%p x%p x%x\n",
|
|
pring->ringno, (unsigned long long)phys,
|
|
slp->next, slp->prev, pring->postbufq_cnt);
|
|
return NULL;
|
|
}
|
|
|
|
static void
|
|
lpfc_sli_abort_els_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
|
|
struct lpfc_iocbq *rspiocb)
|
|
{
|
|
IOCB_t *irsp = &rspiocb->iocb;
|
|
uint16_t abort_iotag, abort_context;
|
|
struct lpfc_iocbq *abort_iocb;
|
|
struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
|
|
|
|
abort_iocb = NULL;
|
|
|
|
if (irsp->ulpStatus) {
|
|
abort_context = cmdiocb->iocb.un.acxri.abortContextTag;
|
|
abort_iotag = cmdiocb->iocb.un.acxri.abortIoTag;
|
|
|
|
spin_lock_irq(&phba->hbalock);
|
|
if (abort_iotag != 0 && abort_iotag <= phba->sli.last_iotag)
|
|
abort_iocb = phba->sli.iocbq_lookup[abort_iotag];
|
|
|
|
lpfc_printf_log(phba, KERN_INFO, LOG_ELS | LOG_SLI,
|
|
"0327 Cannot abort els iocb %p "
|
|
"with tag %x context %x, abort status %x, "
|
|
"abort code %x\n",
|
|
abort_iocb, abort_iotag, abort_context,
|
|
irsp->ulpStatus, irsp->un.ulpWord[4]);
|
|
|
|
/*
|
|
* make sure we have the right iocbq before taking it
|
|
* off the txcmplq and try to call completion routine.
|
|
*/
|
|
if (!abort_iocb ||
|
|
abort_iocb->iocb.ulpContext != abort_context ||
|
|
(abort_iocb->iocb_flag & LPFC_DRIVER_ABORTED) == 0)
|
|
spin_unlock_irq(&phba->hbalock);
|
|
else {
|
|
list_del_init(&abort_iocb->list);
|
|
pring->txcmplq_cnt--;
|
|
spin_unlock_irq(&phba->hbalock);
|
|
|
|
abort_iocb->iocb_flag &= ~LPFC_DRIVER_ABORTED;
|
|
abort_iocb->iocb.ulpStatus = IOSTAT_LOCAL_REJECT;
|
|
abort_iocb->iocb.un.ulpWord[4] = IOERR_SLI_ABORTED;
|
|
(abort_iocb->iocb_cmpl)(phba, abort_iocb, abort_iocb);
|
|
}
|
|
}
|
|
|
|
lpfc_sli_release_iocbq(phba, cmdiocb);
|
|
return;
|
|
}
|
|
|
|
static void
|
|
lpfc_ignore_els_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
|
|
struct lpfc_iocbq *rspiocb)
|
|
{
|
|
IOCB_t *irsp = &rspiocb->iocb;
|
|
|
|
/* ELS cmd tag <ulpIoTag> completes */
|
|
lpfc_printf_log(phba, KERN_INFO, LOG_ELS,
|
|
"0133 Ignoring ELS cmd tag x%x completion Data: "
|
|
"x%x x%x x%x\n",
|
|
irsp->ulpIoTag, irsp->ulpStatus,
|
|
irsp->un.ulpWord[4], irsp->ulpTimeout);
|
|
if (cmdiocb->iocb.ulpCommand == CMD_GEN_REQUEST64_CR)
|
|
lpfc_ct_free_iocb(phba, cmdiocb);
|
|
else
|
|
lpfc_els_free_iocb(phba, cmdiocb);
|
|
return;
|
|
}
|
|
|
|
int
|
|
lpfc_sli_issue_abort_iotag(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
|
|
struct lpfc_iocbq *cmdiocb)
|
|
{
|
|
struct lpfc_vport *vport = cmdiocb->vport;
|
|
struct lpfc_iocbq *abtsiocbp;
|
|
IOCB_t *icmd = NULL;
|
|
IOCB_t *iabt = NULL;
|
|
int retval = IOCB_ERROR;
|
|
|
|
/*
|
|
* There are certain command types we don't want to abort. And we
|
|
* don't want to abort commands that are already in the process of
|
|
* being aborted.
|
|
*/
|
|
icmd = &cmdiocb->iocb;
|
|
if (icmd->ulpCommand == CMD_ABORT_XRI_CN ||
|
|
icmd->ulpCommand == CMD_CLOSE_XRI_CN ||
|
|
(cmdiocb->iocb_flag & LPFC_DRIVER_ABORTED) != 0)
|
|
return 0;
|
|
|
|
/* If we're unloading, don't abort iocb on the ELS ring, but change the
|
|
* callback so that nothing happens when it finishes.
|
|
*/
|
|
if ((vport->load_flag & FC_UNLOADING) &&
|
|
(pring->ringno == LPFC_ELS_RING)) {
|
|
if (cmdiocb->iocb_flag & LPFC_IO_FABRIC)
|
|
cmdiocb->fabric_iocb_cmpl = lpfc_ignore_els_cmpl;
|
|
else
|
|
cmdiocb->iocb_cmpl = lpfc_ignore_els_cmpl;
|
|
goto abort_iotag_exit;
|
|
}
|
|
|
|
/* issue ABTS for this IOCB based on iotag */
|
|
abtsiocbp = __lpfc_sli_get_iocbq(phba);
|
|
if (abtsiocbp == NULL)
|
|
return 0;
|
|
|
|
/* This signals the response to set the correct status
|
|
* before calling the completion handler.
|
|
*/
|
|
cmdiocb->iocb_flag |= LPFC_DRIVER_ABORTED;
|
|
|
|
iabt = &abtsiocbp->iocb;
|
|
iabt->un.acxri.abortType = ABORT_TYPE_ABTS;
|
|
iabt->un.acxri.abortContextTag = icmd->ulpContext;
|
|
iabt->un.acxri.abortIoTag = icmd->ulpIoTag;
|
|
iabt->ulpLe = 1;
|
|
iabt->ulpClass = icmd->ulpClass;
|
|
|
|
if (phba->link_state >= LPFC_LINK_UP)
|
|
iabt->ulpCommand = CMD_ABORT_XRI_CN;
|
|
else
|
|
iabt->ulpCommand = CMD_CLOSE_XRI_CN;
|
|
|
|
abtsiocbp->iocb_cmpl = lpfc_sli_abort_els_cmpl;
|
|
|
|
lpfc_printf_vlog(vport, KERN_INFO, LOG_SLI,
|
|
"0339 Abort xri x%x, original iotag x%x, "
|
|
"abort cmd iotag x%x\n",
|
|
iabt->un.acxri.abortContextTag,
|
|
iabt->un.acxri.abortIoTag, abtsiocbp->iotag);
|
|
retval = __lpfc_sli_issue_iocb(phba, pring, abtsiocbp, 0);
|
|
|
|
abort_iotag_exit:
|
|
/*
|
|
* Caller to this routine should check for IOCB_ERROR
|
|
* and handle it properly. This routine no longer removes
|
|
* iocb off txcmplq and call compl in case of IOCB_ERROR.
|
|
*/
|
|
return retval;
|
|
}
|
|
|
|
static int
|
|
lpfc_sli_validate_fcp_iocb(struct lpfc_iocbq *iocbq, struct lpfc_vport *vport,
|
|
uint16_t tgt_id, uint64_t lun_id,
|
|
lpfc_ctx_cmd ctx_cmd)
|
|
{
|
|
struct lpfc_scsi_buf *lpfc_cmd;
|
|
struct scsi_cmnd *cmnd;
|
|
int rc = 1;
|
|
|
|
if (!(iocbq->iocb_flag & LPFC_IO_FCP))
|
|
return rc;
|
|
|
|
if (iocbq->vport != vport)
|
|
return rc;
|
|
|
|
lpfc_cmd = container_of(iocbq, struct lpfc_scsi_buf, cur_iocbq);
|
|
cmnd = lpfc_cmd->pCmd;
|
|
|
|
if (cmnd == NULL)
|
|
return rc;
|
|
|
|
switch (ctx_cmd) {
|
|
case LPFC_CTX_LUN:
|
|
if ((cmnd->device->id == tgt_id) &&
|
|
(cmnd->device->lun == lun_id))
|
|
rc = 0;
|
|
break;
|
|
case LPFC_CTX_TGT:
|
|
if (cmnd->device->id == tgt_id)
|
|
rc = 0;
|
|
break;
|
|
case LPFC_CTX_HOST:
|
|
rc = 0;
|
|
break;
|
|
default:
|
|
printk(KERN_ERR "%s: Unknown context cmd type, value %d\n",
|
|
__FUNCTION__, ctx_cmd);
|
|
break;
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
int
|
|
lpfc_sli_sum_iocb(struct lpfc_vport *vport, uint16_t tgt_id, uint64_t lun_id,
|
|
lpfc_ctx_cmd ctx_cmd)
|
|
{
|
|
struct lpfc_hba *phba = vport->phba;
|
|
struct lpfc_iocbq *iocbq;
|
|
int sum, i;
|
|
|
|
for (i = 1, sum = 0; i <= phba->sli.last_iotag; i++) {
|
|
iocbq = phba->sli.iocbq_lookup[i];
|
|
|
|
if (lpfc_sli_validate_fcp_iocb (iocbq, vport, tgt_id, lun_id,
|
|
ctx_cmd) == 0)
|
|
sum++;
|
|
}
|
|
|
|
return sum;
|
|
}
|
|
|
|
void
|
|
lpfc_sli_abort_fcp_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
|
|
struct lpfc_iocbq *rspiocb)
|
|
{
|
|
lpfc_sli_release_iocbq(phba, cmdiocb);
|
|
return;
|
|
}
|
|
|
|
int
|
|
lpfc_sli_abort_iocb(struct lpfc_vport *vport, struct lpfc_sli_ring *pring,
|
|
uint16_t tgt_id, uint64_t lun_id, lpfc_ctx_cmd abort_cmd)
|
|
{
|
|
struct lpfc_hba *phba = vport->phba;
|
|
struct lpfc_iocbq *iocbq;
|
|
struct lpfc_iocbq *abtsiocb;
|
|
IOCB_t *cmd = NULL;
|
|
int errcnt = 0, ret_val = 0;
|
|
int i;
|
|
|
|
for (i = 1; i <= phba->sli.last_iotag; i++) {
|
|
iocbq = phba->sli.iocbq_lookup[i];
|
|
|
|
if (lpfc_sli_validate_fcp_iocb(iocbq, vport, tgt_id, lun_id,
|
|
abort_cmd) != 0)
|
|
continue;
|
|
|
|
/* issue ABTS for this IOCB based on iotag */
|
|
abtsiocb = lpfc_sli_get_iocbq(phba);
|
|
if (abtsiocb == NULL) {
|
|
errcnt++;
|
|
continue;
|
|
}
|
|
|
|
cmd = &iocbq->iocb;
|
|
abtsiocb->iocb.un.acxri.abortType = ABORT_TYPE_ABTS;
|
|
abtsiocb->iocb.un.acxri.abortContextTag = cmd->ulpContext;
|
|
abtsiocb->iocb.un.acxri.abortIoTag = cmd->ulpIoTag;
|
|
abtsiocb->iocb.ulpLe = 1;
|
|
abtsiocb->iocb.ulpClass = cmd->ulpClass;
|
|
abtsiocb->vport = phba->pport;
|
|
|
|
if (lpfc_is_link_up(phba))
|
|
abtsiocb->iocb.ulpCommand = CMD_ABORT_XRI_CN;
|
|
else
|
|
abtsiocb->iocb.ulpCommand = CMD_CLOSE_XRI_CN;
|
|
|
|
/* Setup callback routine and issue the command. */
|
|
abtsiocb->iocb_cmpl = lpfc_sli_abort_fcp_cmpl;
|
|
ret_val = lpfc_sli_issue_iocb(phba, pring, abtsiocb, 0);
|
|
if (ret_val == IOCB_ERROR) {
|
|
lpfc_sli_release_iocbq(phba, abtsiocb);
|
|
errcnt++;
|
|
continue;
|
|
}
|
|
}
|
|
|
|
return errcnt;
|
|
}
|
|
|
|
static void
|
|
lpfc_sli_wake_iocb_wait(struct lpfc_hba *phba,
|
|
struct lpfc_iocbq *cmdiocbq,
|
|
struct lpfc_iocbq *rspiocbq)
|
|
{
|
|
wait_queue_head_t *pdone_q;
|
|
unsigned long iflags;
|
|
|
|
spin_lock_irqsave(&phba->hbalock, iflags);
|
|
cmdiocbq->iocb_flag |= LPFC_IO_WAKE;
|
|
if (cmdiocbq->context2 && rspiocbq)
|
|
memcpy(&((struct lpfc_iocbq *)cmdiocbq->context2)->iocb,
|
|
&rspiocbq->iocb, sizeof(IOCB_t));
|
|
|
|
pdone_q = cmdiocbq->context_un.wait_queue;
|
|
if (pdone_q)
|
|
wake_up(pdone_q);
|
|
spin_unlock_irqrestore(&phba->hbalock, iflags);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Issue the caller's iocb and wait for its completion, but no longer than the
|
|
* caller's timeout. Note that iocb_flags is cleared before the
|
|
* lpfc_sli_issue_call since the wake routine sets a unique value and by
|
|
* definition this is a wait function.
|
|
*/
|
|
|
|
int
|
|
lpfc_sli_issue_iocb_wait(struct lpfc_hba *phba,
|
|
struct lpfc_sli_ring *pring,
|
|
struct lpfc_iocbq *piocb,
|
|
struct lpfc_iocbq *prspiocbq,
|
|
uint32_t timeout)
|
|
{
|
|
DECLARE_WAIT_QUEUE_HEAD_ONSTACK(done_q);
|
|
long timeleft, timeout_req = 0;
|
|
int retval = IOCB_SUCCESS;
|
|
uint32_t creg_val;
|
|
|
|
/*
|
|
* If the caller has provided a response iocbq buffer, then context2
|
|
* is NULL or its an error.
|
|
*/
|
|
if (prspiocbq) {
|
|
if (piocb->context2)
|
|
return IOCB_ERROR;
|
|
piocb->context2 = prspiocbq;
|
|
}
|
|
|
|
piocb->iocb_cmpl = lpfc_sli_wake_iocb_wait;
|
|
piocb->context_un.wait_queue = &done_q;
|
|
piocb->iocb_flag &= ~LPFC_IO_WAKE;
|
|
|
|
if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
|
|
creg_val = readl(phba->HCregaddr);
|
|
creg_val |= (HC_R0INT_ENA << LPFC_FCP_RING);
|
|
writel(creg_val, phba->HCregaddr);
|
|
readl(phba->HCregaddr); /* flush */
|
|
}
|
|
|
|
retval = lpfc_sli_issue_iocb(phba, pring, piocb, 0);
|
|
if (retval == IOCB_SUCCESS) {
|
|
timeout_req = timeout * HZ;
|
|
timeleft = wait_event_timeout(done_q,
|
|
piocb->iocb_flag & LPFC_IO_WAKE,
|
|
timeout_req);
|
|
|
|
if (piocb->iocb_flag & LPFC_IO_WAKE) {
|
|
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
|
|
"0331 IOCB wake signaled\n");
|
|
} else if (timeleft == 0) {
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
|
|
"0338 IOCB wait timeout error - no "
|
|
"wake response Data x%x\n", timeout);
|
|
retval = IOCB_TIMEDOUT;
|
|
} else {
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
|
|
"0330 IOCB wake NOT set, "
|
|
"Data x%x x%lx\n",
|
|
timeout, (timeleft / jiffies));
|
|
retval = IOCB_TIMEDOUT;
|
|
}
|
|
} else {
|
|
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
|
|
":0332 IOCB wait issue failed, Data x%x\n",
|
|
retval);
|
|
retval = IOCB_ERROR;
|
|
}
|
|
|
|
if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
|
|
creg_val = readl(phba->HCregaddr);
|
|
creg_val &= ~(HC_R0INT_ENA << LPFC_FCP_RING);
|
|
writel(creg_val, phba->HCregaddr);
|
|
readl(phba->HCregaddr); /* flush */
|
|
}
|
|
|
|
if (prspiocbq)
|
|
piocb->context2 = NULL;
|
|
|
|
piocb->context_un.wait_queue = NULL;
|
|
piocb->iocb_cmpl = NULL;
|
|
return retval;
|
|
}
|
|
|
|
int
|
|
lpfc_sli_issue_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq,
|
|
uint32_t timeout)
|
|
{
|
|
DECLARE_WAIT_QUEUE_HEAD_ONSTACK(done_q);
|
|
int retval;
|
|
unsigned long flag;
|
|
|
|
/* The caller must leave context1 empty. */
|
|
if (pmboxq->context1)
|
|
return MBX_NOT_FINISHED;
|
|
|
|
/* setup wake call as IOCB callback */
|
|
pmboxq->mbox_cmpl = lpfc_sli_wake_mbox_wait;
|
|
/* setup context field to pass wait_queue pointer to wake function */
|
|
pmboxq->context1 = &done_q;
|
|
|
|
/* now issue the command */
|
|
retval = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT);
|
|
|
|
if (retval == MBX_BUSY || retval == MBX_SUCCESS) {
|
|
wait_event_interruptible_timeout(done_q,
|
|
pmboxq->mbox_flag & LPFC_MBX_WAKE,
|
|
timeout * HZ);
|
|
|
|
spin_lock_irqsave(&phba->hbalock, flag);
|
|
pmboxq->context1 = NULL;
|
|
/*
|
|
* if LPFC_MBX_WAKE flag is set the mailbox is completed
|
|
* else do not free the resources.
|
|
*/
|
|
if (pmboxq->mbox_flag & LPFC_MBX_WAKE)
|
|
retval = MBX_SUCCESS;
|
|
else {
|
|
retval = MBX_TIMEOUT;
|
|
pmboxq->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
|
|
}
|
|
spin_unlock_irqrestore(&phba->hbalock, flag);
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
int
|
|
lpfc_sli_flush_mbox_queue(struct lpfc_hba * phba)
|
|
{
|
|
struct lpfc_vport *vport = phba->pport;
|
|
int i = 0;
|
|
uint32_t ha_copy;
|
|
|
|
while (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE && !vport->stopped) {
|
|
if (i++ > LPFC_MBOX_TMO * 1000)
|
|
return 1;
|
|
|
|
/*
|
|
* Call lpfc_sli_handle_mb_event only if a mailbox cmd
|
|
* did finish. This way we won't get the misleading
|
|
* "Stray Mailbox Interrupt" message.
|
|
*/
|
|
spin_lock_irq(&phba->hbalock);
|
|
ha_copy = phba->work_ha;
|
|
phba->work_ha &= ~HA_MBATT;
|
|
spin_unlock_irq(&phba->hbalock);
|
|
|
|
if (ha_copy & HA_MBATT)
|
|
if (lpfc_sli_handle_mb_event(phba) == 0)
|
|
i = 0;
|
|
|
|
msleep(1);
|
|
}
|
|
|
|
return (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) ? 1 : 0;
|
|
}
|
|
|
|
irqreturn_t
|
|
lpfc_intr_handler(int irq, void *dev_id)
|
|
{
|
|
struct lpfc_hba *phba;
|
|
uint32_t ha_copy;
|
|
uint32_t work_ha_copy;
|
|
unsigned long status;
|
|
uint32_t control;
|
|
|
|
MAILBOX_t *mbox, *pmbox;
|
|
struct lpfc_vport *vport;
|
|
struct lpfc_nodelist *ndlp;
|
|
struct lpfc_dmabuf *mp;
|
|
LPFC_MBOXQ_t *pmb;
|
|
int rc;
|
|
|
|
/*
|
|
* Get the driver's phba structure from the dev_id and
|
|
* assume the HBA is not interrupting.
|
|
*/
|
|
phba = (struct lpfc_hba *) dev_id;
|
|
|
|
if (unlikely(!phba))
|
|
return IRQ_NONE;
|
|
|
|
/* If the pci channel is offline, ignore all the interrupts. */
|
|
if (unlikely(pci_channel_offline(phba->pcidev)))
|
|
return IRQ_NONE;
|
|
|
|
phba->sli.slistat.sli_intr++;
|
|
|
|
/*
|
|
* Call the HBA to see if it is interrupting. If not, don't claim
|
|
* the interrupt
|
|
*/
|
|
|
|
/* Ignore all interrupts during initialization. */
|
|
if (unlikely(phba->link_state < LPFC_LINK_DOWN))
|
|
return IRQ_NONE;
|
|
|
|
/*
|
|
* Read host attention register to determine interrupt source
|
|
* Clear Attention Sources, except Error Attention (to
|
|
* preserve status) and Link Attention
|
|
*/
|
|
spin_lock(&phba->hbalock);
|
|
ha_copy = readl(phba->HAregaddr);
|
|
/* If somebody is waiting to handle an eratt don't process it
|
|
* here. The brdkill function will do this.
|
|
*/
|
|
if (phba->link_flag & LS_IGNORE_ERATT)
|
|
ha_copy &= ~HA_ERATT;
|
|
writel((ha_copy & ~(HA_LATT | HA_ERATT)), phba->HAregaddr);
|
|
readl(phba->HAregaddr); /* flush */
|
|
spin_unlock(&phba->hbalock);
|
|
|
|
if (unlikely(!ha_copy))
|
|
return IRQ_NONE;
|
|
|
|
work_ha_copy = ha_copy & phba->work_ha_mask;
|
|
|
|
if (unlikely(work_ha_copy)) {
|
|
if (work_ha_copy & HA_LATT) {
|
|
if (phba->sli.sli_flag & LPFC_PROCESS_LA) {
|
|
/*
|
|
* Turn off Link Attention interrupts
|
|
* until CLEAR_LA done
|
|
*/
|
|
spin_lock(&phba->hbalock);
|
|
phba->sli.sli_flag &= ~LPFC_PROCESS_LA;
|
|
control = readl(phba->HCregaddr);
|
|
control &= ~HC_LAINT_ENA;
|
|
writel(control, phba->HCregaddr);
|
|
readl(phba->HCregaddr); /* flush */
|
|
spin_unlock(&phba->hbalock);
|
|
}
|
|
else
|
|
work_ha_copy &= ~HA_LATT;
|
|
}
|
|
|
|
if (work_ha_copy & ~(HA_ERATT|HA_MBATT|HA_LATT)) {
|
|
/*
|
|
* Turn off Slow Rings interrupts, LPFC_ELS_RING is
|
|
* the only slow ring.
|
|
*/
|
|
status = (work_ha_copy &
|
|
(HA_RXMASK << (4*LPFC_ELS_RING)));
|
|
status >>= (4*LPFC_ELS_RING);
|
|
if (status & HA_RXMASK) {
|
|
spin_lock(&phba->hbalock);
|
|
control = readl(phba->HCregaddr);
|
|
|
|
lpfc_debugfs_slow_ring_trc(phba,
|
|
"ISR slow ring: ctl:x%x stat:x%x isrcnt:x%x",
|
|
control, status,
|
|
(uint32_t)phba->sli.slistat.sli_intr);
|
|
|
|
if (control & (HC_R0INT_ENA << LPFC_ELS_RING)) {
|
|
lpfc_debugfs_slow_ring_trc(phba,
|
|
"ISR Disable ring:"
|
|
"pwork:x%x hawork:x%x wait:x%x",
|
|
phba->work_ha, work_ha_copy,
|
|
(uint32_t)((unsigned long)
|
|
phba->work_wait));
|
|
|
|
control &=
|
|
~(HC_R0INT_ENA << LPFC_ELS_RING);
|
|
writel(control, phba->HCregaddr);
|
|
readl(phba->HCregaddr); /* flush */
|
|
}
|
|
else {
|
|
lpfc_debugfs_slow_ring_trc(phba,
|
|
"ISR slow ring: pwork:"
|
|
"x%x hawork:x%x wait:x%x",
|
|
phba->work_ha, work_ha_copy,
|
|
(uint32_t)((unsigned long)
|
|
phba->work_wait));
|
|
}
|
|
spin_unlock(&phba->hbalock);
|
|
}
|
|
}
|
|
|
|
if (work_ha_copy & HA_ERATT) {
|
|
phba->link_state = LPFC_HBA_ERROR;
|
|
/*
|
|
* There was a link/board error. Read the
|
|
* status register to retrieve the error event
|
|
* and process it.
|
|
*/
|
|
phba->sli.slistat.err_attn_event++;
|
|
/* Save status info */
|
|
phba->work_hs = readl(phba->HSregaddr);
|
|
phba->work_status[0] = readl(phba->MBslimaddr + 0xa8);
|
|
phba->work_status[1] = readl(phba->MBslimaddr + 0xac);
|
|
|
|
/* Clear Chip error bit */
|
|
writel(HA_ERATT, phba->HAregaddr);
|
|
readl(phba->HAregaddr); /* flush */
|
|
phba->pport->stopped = 1;
|
|
}
|
|
|
|
if ((work_ha_copy & HA_MBATT) &&
|
|
(phba->sli.mbox_active)) {
|
|
pmb = phba->sli.mbox_active;
|
|
pmbox = &pmb->mb;
|
|
mbox = &phba->slim2p->mbx;
|
|
vport = pmb->vport;
|
|
|
|
/* First check out the status word */
|
|
lpfc_sli_pcimem_bcopy(mbox, pmbox, sizeof(uint32_t));
|
|
if (pmbox->mbxOwner != OWN_HOST) {
|
|
/*
|
|
* Stray Mailbox Interrupt, mbxCommand <cmd>
|
|
* mbxStatus <status>
|
|
*/
|
|
lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX |
|
|
LOG_SLI,
|
|
"(%d):0304 Stray Mailbox "
|
|
"Interrupt mbxCommand x%x "
|
|
"mbxStatus x%x\n",
|
|
(vport ? vport->vpi : 0),
|
|
pmbox->mbxCommand,
|
|
pmbox->mbxStatus);
|
|
}
|
|
phba->last_completion_time = jiffies;
|
|
del_timer_sync(&phba->sli.mbox_tmo);
|
|
|
|
phba->sli.mbox_active = NULL;
|
|
if (pmb->mbox_cmpl) {
|
|
lpfc_sli_pcimem_bcopy(mbox, pmbox,
|
|
MAILBOX_CMD_SIZE);
|
|
}
|
|
if (pmb->mbox_flag & LPFC_MBX_IMED_UNREG) {
|
|
pmb->mbox_flag &= ~LPFC_MBX_IMED_UNREG;
|
|
|
|
lpfc_debugfs_disc_trc(vport,
|
|
LPFC_DISC_TRC_MBOX_VPORT,
|
|
"MBOX dflt rpi: : status:x%x rpi:x%x",
|
|
(uint32_t)pmbox->mbxStatus,
|
|
pmbox->un.varWords[0], 0);
|
|
|
|
if ( !pmbox->mbxStatus) {
|
|
mp = (struct lpfc_dmabuf *)
|
|
(pmb->context1);
|
|
ndlp = (struct lpfc_nodelist *)
|
|
pmb->context2;
|
|
|
|
/* Reg_LOGIN of dflt RPI was successful.
|
|
* new lets get rid of the RPI using the
|
|
* same mbox buffer.
|
|
*/
|
|
lpfc_unreg_login(phba, vport->vpi,
|
|
pmbox->un.varWords[0], pmb);
|
|
pmb->mbox_cmpl = lpfc_mbx_cmpl_dflt_rpi;
|
|
pmb->context1 = mp;
|
|
pmb->context2 = ndlp;
|
|
pmb->vport = vport;
|
|
spin_lock(&phba->hbalock);
|
|
phba->sli.sli_flag &=
|
|
~LPFC_SLI_MBOX_ACTIVE;
|
|
spin_unlock(&phba->hbalock);
|
|
goto send_current_mbox;
|
|
}
|
|
}
|
|
spin_lock(&phba->pport->work_port_lock);
|
|
phba->pport->work_port_events &= ~WORKER_MBOX_TMO;
|
|
spin_unlock(&phba->pport->work_port_lock);
|
|
lpfc_mbox_cmpl_put(phba, pmb);
|
|
}
|
|
if ((work_ha_copy & HA_MBATT) &&
|
|
(phba->sli.mbox_active == NULL)) {
|
|
send_next_mbox:
|
|
spin_lock(&phba->hbalock);
|
|
phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
|
|
pmb = lpfc_mbox_get(phba);
|
|
spin_unlock(&phba->hbalock);
|
|
send_current_mbox:
|
|
/* Process next mailbox command if there is one */
|
|
if (pmb != NULL) {
|
|
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
|
|
if (rc == MBX_NOT_FINISHED) {
|
|
pmb->mb.mbxStatus = MBX_NOT_FINISHED;
|
|
lpfc_mbox_cmpl_put(phba, pmb);
|
|
goto send_next_mbox;
|
|
}
|
|
}
|
|
|
|
}
|
|
|
|
spin_lock(&phba->hbalock);
|
|
phba->work_ha |= work_ha_copy;
|
|
if (phba->work_wait)
|
|
lpfc_worker_wake_up(phba);
|
|
spin_unlock(&phba->hbalock);
|
|
}
|
|
|
|
ha_copy &= ~(phba->work_ha_mask);
|
|
|
|
/*
|
|
* Process all events on FCP ring. Take the optimized path for
|
|
* FCP IO. Any other IO is slow path and is handled by
|
|
* the worker thread.
|
|
*/
|
|
status = (ha_copy & (HA_RXMASK << (4*LPFC_FCP_RING)));
|
|
status >>= (4*LPFC_FCP_RING);
|
|
if (status & HA_RXMASK)
|
|
lpfc_sli_handle_fast_ring_event(phba,
|
|
&phba->sli.ring[LPFC_FCP_RING],
|
|
status);
|
|
|
|
if (phba->cfg_multi_ring_support == 2) {
|
|
/*
|
|
* Process all events on extra ring. Take the optimized path
|
|
* for extra ring IO. Any other IO is slow path and is handled
|
|
* by the worker thread.
|
|
*/
|
|
status = (ha_copy & (HA_RXMASK << (4*LPFC_EXTRA_RING)));
|
|
status >>= (4*LPFC_EXTRA_RING);
|
|
if (status & HA_RXMASK) {
|
|
lpfc_sli_handle_fast_ring_event(phba,
|
|
&phba->sli.ring[LPFC_EXTRA_RING],
|
|
status);
|
|
}
|
|
}
|
|
return IRQ_HANDLED;
|
|
|
|
} /* lpfc_intr_handler */
|