forked from Minki/linux
a8a8bd547e
Currently, when our driver becomes idle for i915.pc8_timeout (default:
5s) we enable PC8, so we save some power, but not everything we can.
Then, while PC8 is enabled, if we stay idle for more
autosuspend_delay_ms (default: 10s) we'll enter runtime PM and put the
graphics device in D3 state, saving even more power. The two features
are separate things with increasing levels of power savings, but if we
disable PC8 we'll never get into D3.
While from the modularity point of view it would be nice to keep these
features as separate, we have reasons to merge them:
- We are not aware of anybody wanting a "PC8 without D3" environment.
- If we keep both features as separate, we'll have to to test both
PC8 and PC8+D3 code paths. We're already having a major pain to
make QA do automated testing of just one thing, testing both paths
will cost even more.
- Only Haswell+ supports PC8, so if we want to add runtime PM support
to, for example, IVB, we'll have to copy some code from the PC8
feature to runtime PM, so merging both features as a single thing
will make it easier for enabling runtime PM on other platforms.
This patch only does the very basic steps required to have PC8 and
runtime PM merged on a single feature: the next patches will take care
of cleaning up everything.
v2: - Rebase.
v3: - Rebase.
- Fully remove the deprecated i915 params since Daniel doesn't
consider them as part of the ABI.
v4: - Rebase.
- Fix typo in the commit message.
v5: - Rebase, again.
- Add a huge comment explaining the different forcewake usage
(Chris, Daniel).
- Use open-coded forcewake functions (Daniel).
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
155 lines
5.9 KiB
C
155 lines
5.9 KiB
C
/*
|
|
* Copyright © 2014 Intel Corporation
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
* copy of this software and associated documentation files (the
|
|
* "Software"), to deal in the Software without restriction, including
|
|
* without limitation the rights to use, copy, modify, merge, publish,
|
|
* distribute, sub license, and/or sell copies of the Software, and to
|
|
* permit persons to whom the Software is furnished to do so, subject to
|
|
* the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice (including the
|
|
* next paragraph) shall be included in all copies or substantial portions
|
|
* of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
|
|
* IN THE SOFTWARE.
|
|
*/
|
|
|
|
#include "i915_drv.h"
|
|
|
|
struct i915_params i915 __read_mostly = {
|
|
.modeset = -1,
|
|
.panel_ignore_lid = 1,
|
|
.powersave = 1,
|
|
.semaphores = -1,
|
|
.lvds_downclock = 0,
|
|
.lvds_channel_mode = 0,
|
|
.panel_use_ssc = -1,
|
|
.vbt_sdvo_panel_type = -1,
|
|
.enable_rc6 = -1,
|
|
.enable_fbc = -1,
|
|
.enable_hangcheck = true,
|
|
.enable_ppgtt = -1,
|
|
.enable_psr = 0,
|
|
.preliminary_hw_support = IS_ENABLED(CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT),
|
|
.disable_power_well = 1,
|
|
.enable_ips = 1,
|
|
.fastboot = 0,
|
|
.prefault_disable = 0,
|
|
.reset = true,
|
|
.invert_brightness = 0,
|
|
.disable_display = 0,
|
|
.enable_cmd_parser = 0,
|
|
};
|
|
|
|
module_param_named(modeset, i915.modeset, int, 0400);
|
|
MODULE_PARM_DESC(modeset,
|
|
"Use kernel modesetting [KMS] (0=DRM_I915_KMS from .config, "
|
|
"1=on, -1=force vga console preference [default])");
|
|
|
|
module_param_named(panel_ignore_lid, i915.panel_ignore_lid, int, 0600);
|
|
MODULE_PARM_DESC(panel_ignore_lid,
|
|
"Override lid status (0=autodetect, 1=autodetect disabled [default], "
|
|
"-1=force lid closed, -2=force lid open)");
|
|
|
|
module_param_named(powersave, i915.powersave, int, 0600);
|
|
MODULE_PARM_DESC(powersave,
|
|
"Enable powersavings, fbc, downclocking, etc. (default: true)");
|
|
|
|
module_param_named(semaphores, i915.semaphores, int, 0400);
|
|
MODULE_PARM_DESC(semaphores,
|
|
"Use semaphores for inter-ring sync "
|
|
"(default: -1 (use per-chip defaults))");
|
|
|
|
module_param_named(enable_rc6, i915.enable_rc6, int, 0400);
|
|
MODULE_PARM_DESC(enable_rc6,
|
|
"Enable power-saving render C-state 6. "
|
|
"Different stages can be selected via bitmask values "
|
|
"(0 = disable; 1 = enable rc6; 2 = enable deep rc6; 4 = enable deepest rc6). "
|
|
"For example, 3 would enable rc6 and deep rc6, and 7 would enable everything. "
|
|
"default: -1 (use per-chip default)");
|
|
|
|
module_param_named(enable_fbc, i915.enable_fbc, int, 0600);
|
|
MODULE_PARM_DESC(enable_fbc,
|
|
"Enable frame buffer compression for power savings "
|
|
"(default: -1 (use per-chip default))");
|
|
|
|
module_param_named(lvds_downclock, i915.lvds_downclock, int, 0400);
|
|
MODULE_PARM_DESC(lvds_downclock,
|
|
"Use panel (LVDS/eDP) downclocking for power savings "
|
|
"(default: false)");
|
|
|
|
module_param_named(lvds_channel_mode, i915.lvds_channel_mode, int, 0600);
|
|
MODULE_PARM_DESC(lvds_channel_mode,
|
|
"Specify LVDS channel mode "
|
|
"(0=probe BIOS [default], 1=single-channel, 2=dual-channel)");
|
|
|
|
module_param_named(lvds_use_ssc, i915.panel_use_ssc, int, 0600);
|
|
MODULE_PARM_DESC(lvds_use_ssc,
|
|
"Use Spread Spectrum Clock with panels [LVDS/eDP] "
|
|
"(default: auto from VBT)");
|
|
|
|
module_param_named(vbt_sdvo_panel_type, i915.vbt_sdvo_panel_type, int, 0600);
|
|
MODULE_PARM_DESC(vbt_sdvo_panel_type,
|
|
"Override/Ignore selection of SDVO panel mode in the VBT "
|
|
"(-2=ignore, -1=auto [default], index in VBT BIOS table)");
|
|
|
|
module_param_named(reset, i915.reset, bool, 0600);
|
|
MODULE_PARM_DESC(reset, "Attempt GPU resets (default: true)");
|
|
|
|
module_param_named(enable_hangcheck, i915.enable_hangcheck, bool, 0644);
|
|
MODULE_PARM_DESC(enable_hangcheck,
|
|
"Periodically check GPU activity for detecting hangs. "
|
|
"WARNING: Disabling this can cause system wide hangs. "
|
|
"(default: true)");
|
|
|
|
module_param_named(enable_ppgtt, i915.enable_ppgtt, int, 0400);
|
|
MODULE_PARM_DESC(enable_ppgtt,
|
|
"Override PPGTT usage. "
|
|
"(-1=auto [default], 0=disabled, 1=aliasing, 2=full)");
|
|
|
|
module_param_named(enable_psr, i915.enable_psr, int, 0600);
|
|
MODULE_PARM_DESC(enable_psr, "Enable PSR (default: false)");
|
|
|
|
module_param_named(preliminary_hw_support, i915.preliminary_hw_support, int, 0600);
|
|
MODULE_PARM_DESC(preliminary_hw_support,
|
|
"Enable preliminary hardware support.");
|
|
|
|
module_param_named(disable_power_well, i915.disable_power_well, int, 0600);
|
|
MODULE_PARM_DESC(disable_power_well,
|
|
"Disable the power well when possible (default: true)");
|
|
|
|
module_param_named(enable_ips, i915.enable_ips, int, 0600);
|
|
MODULE_PARM_DESC(enable_ips, "Enable IPS (default: true)");
|
|
|
|
module_param_named(fastboot, i915.fastboot, bool, 0600);
|
|
MODULE_PARM_DESC(fastboot,
|
|
"Try to skip unnecessary mode sets at boot time (default: false)");
|
|
|
|
module_param_named(prefault_disable, i915.prefault_disable, bool, 0600);
|
|
MODULE_PARM_DESC(prefault_disable,
|
|
"Disable page prefaulting for pread/pwrite/reloc (default:false). "
|
|
"For developers only.");
|
|
|
|
module_param_named(invert_brightness, i915.invert_brightness, int, 0600);
|
|
MODULE_PARM_DESC(invert_brightness,
|
|
"Invert backlight brightness "
|
|
"(-1 force normal, 0 machine defaults, 1 force inversion), please "
|
|
"report PCI device ID, subsystem vendor and subsystem device ID "
|
|
"to dri-devel@lists.freedesktop.org, if your machine needs it. "
|
|
"It will then be included in an upcoming module version.");
|
|
|
|
module_param_named(disable_display, i915.disable_display, bool, 0600);
|
|
MODULE_PARM_DESC(disable_display, "Disable display (default: false)");
|
|
|
|
module_param_named(enable_cmd_parser, i915.enable_cmd_parser, int, 0600);
|
|
MODULE_PARM_DESC(enable_cmd_parser,
|
|
"Enable command parsing (1=enabled, 0=disabled [default])");
|