forked from Minki/linux
d39284f21d
SAM9X60's PMC uses different offset for master clock register. Add a member of type struct pmc_reg_config in struct reg_config, fill it correspondingly for SAMA5D2 and SAM9X60 and use it in poweroff() function. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
424 lines
10 KiB
C
424 lines
10 KiB
C
/*
|
|
* Atmel SAMA5D2-Compatible Shutdown Controller (SHDWC) driver.
|
|
* Found on some SoCs as the sama5d2 (obviously).
|
|
*
|
|
* Copyright (C) 2015 Atmel Corporation,
|
|
* Nicolas Ferre <nicolas.ferre@atmel.com>
|
|
*
|
|
* Evolved from driver at91-poweroff.c.
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without any
|
|
* warranty of any kind, whether express or implied.
|
|
*
|
|
* TODO:
|
|
* - addition to status of other wake-up inputs [1 - 15]
|
|
* - Analog Comparator wake-up alarm
|
|
* - Serial RX wake-up alarm
|
|
* - low power debouncer
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/clk/at91_pmc.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/printk.h>
|
|
|
|
#include <soc/at91/at91sam9_ddrsdr.h>
|
|
|
|
#define SLOW_CLOCK_FREQ 32768
|
|
|
|
#define AT91_SHDW_CR 0x00 /* Shut Down Control Register */
|
|
#define AT91_SHDW_SHDW BIT(0) /* Shut Down command */
|
|
#define AT91_SHDW_KEY (0xa5UL << 24) /* KEY Password */
|
|
|
|
#define AT91_SHDW_MR 0x04 /* Shut Down Mode Register */
|
|
#define AT91_SHDW_WKUPDBC_SHIFT 24
|
|
#define AT91_SHDW_WKUPDBC_MASK GENMASK(31, 16)
|
|
#define AT91_SHDW_WKUPDBC(x) (((x) << AT91_SHDW_WKUPDBC_SHIFT) \
|
|
& AT91_SHDW_WKUPDBC_MASK)
|
|
|
|
#define AT91_SHDW_SR 0x08 /* Shut Down Status Register */
|
|
#define AT91_SHDW_WKUPIS_SHIFT 16
|
|
#define AT91_SHDW_WKUPIS_MASK GENMASK(31, 16)
|
|
#define AT91_SHDW_WKUPIS(x) ((1 << (x)) << AT91_SHDW_WKUPIS_SHIFT \
|
|
& AT91_SHDW_WKUPIS_MASK)
|
|
|
|
#define AT91_SHDW_WUIR 0x0c /* Shutdown Wake-up Inputs Register */
|
|
#define AT91_SHDW_WKUPEN_MASK GENMASK(15, 0)
|
|
#define AT91_SHDW_WKUPEN(x) ((1 << (x)) & AT91_SHDW_WKUPEN_MASK)
|
|
#define AT91_SHDW_WKUPT_SHIFT 16
|
|
#define AT91_SHDW_WKUPT_MASK GENMASK(31, 16)
|
|
#define AT91_SHDW_WKUPT(x) ((1 << (x)) << AT91_SHDW_WKUPT_SHIFT \
|
|
& AT91_SHDW_WKUPT_MASK)
|
|
|
|
#define SHDW_WK_PIN(reg, cfg) ((reg) & AT91_SHDW_WKUPIS((cfg)->wkup_pin_input))
|
|
#define SHDW_RTCWK(reg, cfg) (((reg) >> ((cfg)->sr_rtcwk_shift)) & 0x1)
|
|
#define SHDW_RTTWK(reg, cfg) (((reg) >> ((cfg)->sr_rttwk_shift)) & 0x1)
|
|
#define SHDW_RTCWKEN(cfg) (1 << ((cfg)->mr_rtcwk_shift))
|
|
#define SHDW_RTTWKEN(cfg) (1 << ((cfg)->mr_rttwk_shift))
|
|
|
|
#define DBC_PERIOD_US(x) DIV_ROUND_UP_ULL((1000000 * (x)), \
|
|
SLOW_CLOCK_FREQ)
|
|
|
|
#define SHDW_CFG_NOT_USED (32)
|
|
|
|
struct shdwc_reg_config {
|
|
u8 wkup_pin_input;
|
|
u8 mr_rtcwk_shift;
|
|
u8 mr_rttwk_shift;
|
|
u8 sr_rtcwk_shift;
|
|
u8 sr_rttwk_shift;
|
|
};
|
|
|
|
struct pmc_reg_config {
|
|
u8 mckr;
|
|
};
|
|
|
|
struct reg_config {
|
|
struct shdwc_reg_config shdwc;
|
|
struct pmc_reg_config pmc;
|
|
};
|
|
|
|
struct shdwc {
|
|
const struct reg_config *rcfg;
|
|
struct clk *sclk;
|
|
void __iomem *shdwc_base;
|
|
void __iomem *mpddrc_base;
|
|
void __iomem *pmc_base;
|
|
};
|
|
|
|
/*
|
|
* Hold configuration here, cannot be more than one instance of the driver
|
|
* since pm_power_off itself is global.
|
|
*/
|
|
static struct shdwc *at91_shdwc;
|
|
|
|
static const unsigned long long sdwc_dbc_period[] = {
|
|
0, 3, 32, 512, 4096, 32768,
|
|
};
|
|
|
|
static void __init at91_wakeup_status(struct platform_device *pdev)
|
|
{
|
|
struct shdwc *shdw = platform_get_drvdata(pdev);
|
|
const struct reg_config *rcfg = shdw->rcfg;
|
|
u32 reg;
|
|
char *reason = "unknown";
|
|
|
|
reg = readl(shdw->shdwc_base + AT91_SHDW_SR);
|
|
|
|
dev_dbg(&pdev->dev, "%s: status = %#x\n", __func__, reg);
|
|
|
|
/* Simple power-on, just bail out */
|
|
if (!reg)
|
|
return;
|
|
|
|
if (SHDW_WK_PIN(reg, &rcfg->shdwc))
|
|
reason = "WKUP pin";
|
|
else if (SHDW_RTCWK(reg, &rcfg->shdwc))
|
|
reason = "RTC";
|
|
else if (SHDW_RTTWK(reg, &rcfg->shdwc))
|
|
reason = "RTT";
|
|
|
|
pr_info("AT91: Wake-Up source: %s\n", reason);
|
|
}
|
|
|
|
static void at91_poweroff(void)
|
|
{
|
|
asm volatile(
|
|
/* Align to cache lines */
|
|
".balign 32\n\t"
|
|
|
|
/* Ensure AT91_SHDW_CR is in the TLB by reading it */
|
|
" ldr r6, [%2, #" __stringify(AT91_SHDW_CR) "]\n\t"
|
|
|
|
/* Power down SDRAM0 */
|
|
" tst %0, #0\n\t"
|
|
" beq 1f\n\t"
|
|
" str %1, [%0, #" __stringify(AT91_DDRSDRC_LPR) "]\n\t"
|
|
|
|
/* Switch the master clock source to slow clock. */
|
|
"1: ldr r6, [%4, %5]\n\t"
|
|
" bic r6, r6, #" __stringify(AT91_PMC_CSS) "\n\t"
|
|
" str r6, [%4, %5]\n\t"
|
|
/* Wait for clock switch. */
|
|
"2: ldr r6, [%4, #" __stringify(AT91_PMC_SR) "]\n\t"
|
|
" tst r6, #" __stringify(AT91_PMC_MCKRDY) "\n\t"
|
|
" beq 2b\n\t"
|
|
|
|
/* Shutdown CPU */
|
|
" str %3, [%2, #" __stringify(AT91_SHDW_CR) "]\n\t"
|
|
|
|
" b .\n\t"
|
|
:
|
|
: "r" (at91_shdwc->mpddrc_base),
|
|
"r" cpu_to_le32(AT91_DDRSDRC_LPDDR2_PWOFF),
|
|
"r" (at91_shdwc->shdwc_base),
|
|
"r" cpu_to_le32(AT91_SHDW_KEY | AT91_SHDW_SHDW),
|
|
"r" (at91_shdwc->pmc_base),
|
|
"r" (at91_shdwc->rcfg->pmc.mckr)
|
|
: "r6");
|
|
}
|
|
|
|
static u32 at91_shdwc_debouncer_value(struct platform_device *pdev,
|
|
u32 in_period_us)
|
|
{
|
|
int i;
|
|
int max_idx = ARRAY_SIZE(sdwc_dbc_period) - 1;
|
|
unsigned long long period_us;
|
|
unsigned long long max_period_us = DBC_PERIOD_US(sdwc_dbc_period[max_idx]);
|
|
|
|
if (in_period_us > max_period_us) {
|
|
dev_warn(&pdev->dev,
|
|
"debouncer period %u too big, reduced to %llu us\n",
|
|
in_period_us, max_period_us);
|
|
return max_idx;
|
|
}
|
|
|
|
for (i = max_idx - 1; i > 0; i--) {
|
|
period_us = DBC_PERIOD_US(sdwc_dbc_period[i]);
|
|
dev_dbg(&pdev->dev, "%s: ref[%d] = %llu\n",
|
|
__func__, i, period_us);
|
|
if (in_period_us > period_us)
|
|
break;
|
|
}
|
|
|
|
return i + 1;
|
|
}
|
|
|
|
static u32 at91_shdwc_get_wakeup_input(struct platform_device *pdev,
|
|
struct device_node *np)
|
|
{
|
|
struct device_node *cnp;
|
|
u32 wk_input_mask;
|
|
u32 wuir = 0;
|
|
u32 wk_input;
|
|
|
|
for_each_child_of_node(np, cnp) {
|
|
if (of_property_read_u32(cnp, "reg", &wk_input)) {
|
|
dev_warn(&pdev->dev, "reg property is missing for %pOF\n",
|
|
cnp);
|
|
continue;
|
|
}
|
|
|
|
wk_input_mask = 1 << wk_input;
|
|
if (!(wk_input_mask & AT91_SHDW_WKUPEN_MASK)) {
|
|
dev_warn(&pdev->dev,
|
|
"wake-up input %d out of bounds ignore\n",
|
|
wk_input);
|
|
continue;
|
|
}
|
|
wuir |= wk_input_mask;
|
|
|
|
if (of_property_read_bool(cnp, "atmel,wakeup-active-high"))
|
|
wuir |= AT91_SHDW_WKUPT(wk_input);
|
|
|
|
dev_dbg(&pdev->dev, "%s: (child %d) wuir = %#x\n",
|
|
__func__, wk_input, wuir);
|
|
}
|
|
|
|
return wuir;
|
|
}
|
|
|
|
static void at91_shdwc_dt_configure(struct platform_device *pdev)
|
|
{
|
|
struct shdwc *shdw = platform_get_drvdata(pdev);
|
|
const struct reg_config *rcfg = shdw->rcfg;
|
|
struct device_node *np = pdev->dev.of_node;
|
|
u32 mode = 0, tmp, input;
|
|
|
|
if (!np) {
|
|
dev_err(&pdev->dev, "device node not found\n");
|
|
return;
|
|
}
|
|
|
|
if (!of_property_read_u32(np, "debounce-delay-us", &tmp))
|
|
mode |= AT91_SHDW_WKUPDBC(at91_shdwc_debouncer_value(pdev, tmp));
|
|
|
|
if (of_property_read_bool(np, "atmel,wakeup-rtc-timer"))
|
|
mode |= SHDW_RTCWKEN(&rcfg->shdwc);
|
|
|
|
if (of_property_read_bool(np, "atmel,wakeup-rtt-timer"))
|
|
mode |= SHDW_RTTWKEN(&rcfg->shdwc);
|
|
|
|
dev_dbg(&pdev->dev, "%s: mode = %#x\n", __func__, mode);
|
|
writel(mode, shdw->shdwc_base + AT91_SHDW_MR);
|
|
|
|
input = at91_shdwc_get_wakeup_input(pdev, np);
|
|
writel(input, shdw->shdwc_base + AT91_SHDW_WUIR);
|
|
}
|
|
|
|
static const struct reg_config sama5d2_reg_config = {
|
|
.shdwc = {
|
|
.wkup_pin_input = 0,
|
|
.mr_rtcwk_shift = 17,
|
|
.mr_rttwk_shift = SHDW_CFG_NOT_USED,
|
|
.sr_rtcwk_shift = 5,
|
|
.sr_rttwk_shift = SHDW_CFG_NOT_USED,
|
|
},
|
|
.pmc = {
|
|
.mckr = 0x30,
|
|
},
|
|
};
|
|
|
|
static const struct reg_config sam9x60_reg_config = {
|
|
.shdwc = {
|
|
.wkup_pin_input = 0,
|
|
.mr_rtcwk_shift = 17,
|
|
.mr_rttwk_shift = 16,
|
|
.sr_rtcwk_shift = 5,
|
|
.sr_rttwk_shift = 4,
|
|
},
|
|
.pmc = {
|
|
.mckr = 0x28,
|
|
},
|
|
};
|
|
|
|
static const struct of_device_id at91_shdwc_of_match[] = {
|
|
{
|
|
.compatible = "atmel,sama5d2-shdwc",
|
|
.data = &sama5d2_reg_config,
|
|
},
|
|
{
|
|
.compatible = "microchip,sam9x60-shdwc",
|
|
.data = &sam9x60_reg_config,
|
|
}, {
|
|
/*sentinel*/
|
|
}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, at91_shdwc_of_match);
|
|
|
|
static const struct of_device_id at91_pmc_ids[] = {
|
|
{ .compatible = "atmel,sama5d2-pmc" },
|
|
{ .compatible = "microchip,sam9x60-pmc" },
|
|
{ /* Sentinel. */ }
|
|
};
|
|
|
|
static int __init at91_shdwc_probe(struct platform_device *pdev)
|
|
{
|
|
struct resource *res;
|
|
const struct of_device_id *match;
|
|
struct device_node *np;
|
|
u32 ddr_type;
|
|
int ret;
|
|
|
|
if (!pdev->dev.of_node)
|
|
return -ENODEV;
|
|
|
|
if (at91_shdwc)
|
|
return -EBUSY;
|
|
|
|
at91_shdwc = devm_kzalloc(&pdev->dev, sizeof(*at91_shdwc), GFP_KERNEL);
|
|
if (!at91_shdwc)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, at91_shdwc);
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
at91_shdwc->shdwc_base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(at91_shdwc->shdwc_base)) {
|
|
dev_err(&pdev->dev, "Could not map reset controller address\n");
|
|
return PTR_ERR(at91_shdwc->shdwc_base);
|
|
}
|
|
|
|
match = of_match_node(at91_shdwc_of_match, pdev->dev.of_node);
|
|
at91_shdwc->rcfg = match->data;
|
|
|
|
at91_shdwc->sclk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(at91_shdwc->sclk))
|
|
return PTR_ERR(at91_shdwc->sclk);
|
|
|
|
ret = clk_prepare_enable(at91_shdwc->sclk);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Could not enable slow clock\n");
|
|
return ret;
|
|
}
|
|
|
|
at91_wakeup_status(pdev);
|
|
|
|
at91_shdwc_dt_configure(pdev);
|
|
|
|
np = of_find_matching_node(NULL, at91_pmc_ids);
|
|
if (!np) {
|
|
ret = -ENODEV;
|
|
goto clk_disable;
|
|
}
|
|
|
|
at91_shdwc->pmc_base = of_iomap(np, 0);
|
|
of_node_put(np);
|
|
|
|
if (!at91_shdwc->pmc_base) {
|
|
ret = -ENOMEM;
|
|
goto clk_disable;
|
|
}
|
|
|
|
np = of_find_compatible_node(NULL, NULL, "atmel,sama5d3-ddramc");
|
|
if (!np) {
|
|
ret = -ENODEV;
|
|
goto unmap;
|
|
}
|
|
|
|
at91_shdwc->mpddrc_base = of_iomap(np, 0);
|
|
of_node_put(np);
|
|
|
|
if (!at91_shdwc->mpddrc_base) {
|
|
ret = -ENOMEM;
|
|
goto unmap;
|
|
}
|
|
|
|
pm_power_off = at91_poweroff;
|
|
|
|
ddr_type = readl(at91_shdwc->mpddrc_base + AT91_DDRSDRC_MDR) &
|
|
AT91_DDRSDRC_MD;
|
|
if (ddr_type != AT91_DDRSDRC_MD_LPDDR2 &&
|
|
ddr_type != AT91_DDRSDRC_MD_LPDDR3) {
|
|
iounmap(at91_shdwc->mpddrc_base);
|
|
at91_shdwc->mpddrc_base = NULL;
|
|
}
|
|
|
|
return 0;
|
|
|
|
unmap:
|
|
iounmap(at91_shdwc->pmc_base);
|
|
clk_disable:
|
|
clk_disable_unprepare(at91_shdwc->sclk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __exit at91_shdwc_remove(struct platform_device *pdev)
|
|
{
|
|
struct shdwc *shdw = platform_get_drvdata(pdev);
|
|
|
|
if (pm_power_off == at91_poweroff)
|
|
pm_power_off = NULL;
|
|
|
|
/* Reset values to disable wake-up features */
|
|
writel(0, shdw->shdwc_base + AT91_SHDW_MR);
|
|
writel(0, shdw->shdwc_base + AT91_SHDW_WUIR);
|
|
|
|
if (shdw->mpddrc_base)
|
|
iounmap(shdw->mpddrc_base);
|
|
iounmap(shdw->pmc_base);
|
|
|
|
clk_disable_unprepare(shdw->sclk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver at91_shdwc_driver = {
|
|
.remove = __exit_p(at91_shdwc_remove),
|
|
.driver = {
|
|
.name = "at91-shdwc",
|
|
.of_match_table = at91_shdwc_of_match,
|
|
},
|
|
};
|
|
module_platform_driver_probe(at91_shdwc_driver, at91_shdwc_probe);
|
|
|
|
MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@atmel.com>");
|
|
MODULE_DESCRIPTION("Atmel shutdown controller driver");
|
|
MODULE_LICENSE("GPL v2");
|