forked from Minki/linux
a771151a83
The cleanups for v4.9 are a little larger that usual, but thankfully
that is almost exclusively due to removing a significant number of
files that have become obsolete after the still ongoing conversion
of old board files to devicetree.
- for mach-omap2, which is still the largest platform in arch/arm/,
the conversion to DT is finally complete after the Nokia N900 is
now fully supported there, along with the omap3 LDP, and we can
remove those two board files.
If no regressions are found, another large cleanup for the platform
will happen as a follow-up, removing dead code and restructuring
the platform based on being DT-only.
- In mach-imx, similar work is ongoing, but has not come that far.
This time, we remove the obsolete board file for the i.MX1
generation, which like i.MX25, i.MX5, i.MX6, and i.MX7 is now DT-only.
The remaining board files are for i.MX2 and i.MX3 machines
based on old ARM926 or ARM1136 cores that should work with DT
in principle.
- realview has just been converted from board files to DT, and a lot
of code gets removed in the process. This is the last
ARM/Keil/Versatile derived platform that was still using board
files, the other ones being integrator, versatile and vexpress.
We can probably merge the remaining code into a single directory
in the near future.
- clps711x had completed the conversion in v4.8, but we accidentally
left the files in place that should have been deleted then.
Conflicts: two files deleted here have been modified upstream,
the changes can be discarded.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=WaLy
-----END PGP SIGNATURE-----
Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanups from Arnd Bergmann:
"The cleanups for v4.9 are a little larger that usual, but thankfully
that is almost exclusively due to removing a significant number of
files that have become obsolete after the still ongoing conversion of
old board files to devicetree.
- for mach-omap2, which is still the largest platform in arch/arm/,
the conversion to DT is finally complete after the Nokia N900 is
now fully supported there, along with the omap3 LDP, and we can
remove those two board files. If no regressions are found, another
large cleanup for the platform will happen as a follow-up, removing
dead code and restructuring the platform based on being DT-only.
- In mach-imx, similar work is ongoing, but has not come that far.
This time, we remove the obsolete board file for the i.MX1
generation, which like i.MX25, i.MX5, i.MX6, and i.MX7 is now
DT-only. The remaining board files are for i.MX2 and i.MX3 machines
based on old ARM926 or ARM1136 cores that should work with DT in
principle.
- realview has just been converted from board files to DT, and a lot
of code gets removed in the process. This is the last
ARM/Keil/Versatile derived platform that was still using board
files, the other ones being integrator, versatile and vexpress. We
can probably merge the remaining code into a single directory in
the near future.
- clps711x had completed the conversion in v4.8, but we accidentally
left the files in place that should have been deleted then"
* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits)
ARM: select PCI_DOMAINS config from ARCH_MULTIPLATFORM
ARM: stop *MIGHT_HAVE_PCI* config from being selected redundantly
ARM: imx: (trivial) fix typo and grammar
ARM: clps711x: remove extraneous files
ARM: imx: use IS_ENABLED() instead of checking for built-in or module
ARM: OMAP2+: use IS_ENABLED() instead of checking for built-in or module
ARM: OMAP1: use IS_ENABLED() instead of checking for built-in or module
ARM: imx: remove platform-mxc_rnga
ARM: realview: imply device tree boot
ARM: realview: no need to select SMP_ON_UP explicitly
ARM: realview: delete the RealView board files
ARM: imx: no need to select SMP_ON_UP explicitly
ARM: i.MX: Move SOC_IMX1 into 'Device tree only'
ARM: i.MX: Remove i.MX1 non-DT support
ARM: i.MX: Remove i.MX1 Synertronixx SCB9328 board support
ARM: i.MX: Remove i.MX1 Armadeus APF9328 board support
ARM: mxs: remove obsolete startup code for TX28
ARM: i.MX31 iomux: remove duplicates with alternate name
ARM: i.MX31 iomux: remove plain duplicates
ARM: OMAP2+: Drop legacy board file for LDP
...
|
||
|---|---|---|
| .. | ||
| devices | ||
| 3ds_debugboard.c | ||
| 3ds_debugboard.h | ||
| anatop.c | ||
| avic.c | ||
| board-mx31lilly.h | ||
| board-mx31lite.h | ||
| board-mx31moboard.h | ||
| common.h | ||
| cpu-imx5.c | ||
| cpu-imx25.c | ||
| cpu-imx27.c | ||
| cpu-imx31.c | ||
| cpu-imx35.c | ||
| cpu.c | ||
| cpuidle-imx5.c | ||
| cpuidle-imx6q.c | ||
| cpuidle-imx6sl.c | ||
| cpuidle-imx6sx.c | ||
| cpuidle.h | ||
| crmregs-imx3.h | ||
| devices-imx21.h | ||
| devices-imx27.h | ||
| devices-imx31.h | ||
| devices-imx35.h | ||
| ehci-imx27.c | ||
| ehci-imx31.c | ||
| ehci-imx35.c | ||
| ehci.h | ||
| epit.c | ||
| gpc.c | ||
| hardware.h | ||
| headsmp.S | ||
| hotplug.c | ||
| iim.h | ||
| imx27-dt.c | ||
| imx31-dt.c | ||
| imx35-dt.c | ||
| iomux-imx31.c | ||
| iomux-mx2x.h | ||
| iomux-mx3.h | ||
| iomux-mx21.h | ||
| iomux-mx27.h | ||
| iomux-mx35.h | ||
| iomux-v1.c | ||
| iomux-v1.h | ||
| iomux-v3.c | ||
| iomux-v3.h | ||
| irq-common.c | ||
| irq-common.h | ||
| Kconfig | ||
| mach-armadillo5x0.c | ||
| mach-bug.c | ||
| mach-imx1.c | ||
| mach-imx6q.c | ||
| mach-imx6sl.c | ||
| mach-imx6sx.c | ||
| mach-imx6ul.c | ||
| mach-imx7d.c | ||
| mach-imx25.c | ||
| mach-imx27_visstrim_m10.c | ||
| mach-imx50.c | ||
| mach-imx51.c | ||
| mach-imx53.c | ||
| mach-kzm_arm11_01.c | ||
| mach-ls1021a.c | ||
| mach-mx21ads.c | ||
| mach-mx27_3ds.c | ||
| mach-mx27ads.c | ||
| mach-mx31_3ds.c | ||
| mach-mx31ads.c | ||
| mach-mx31lilly.c | ||
| mach-mx31lite.c | ||
| mach-mx31moboard.c | ||
| mach-mx35_3ds.c | ||
| mach-pca100.c | ||
| mach-pcm037_eet.c | ||
| mach-pcm037.c | ||
| mach-pcm043.c | ||
| mach-qong.c | ||
| mach-vf610.c | ||
| mach-vpr200.c | ||
| Makefile | ||
| Makefile.boot | ||
| mm-imx3.c | ||
| mm-imx21.c | ||
| mm-imx27.c | ||
| mmdc.c | ||
| mx2x.h | ||
| mx3x.h | ||
| mx21.h | ||
| mx27.h | ||
| mx31.h | ||
| mx31lilly-db.c | ||
| mx31lite-db.c | ||
| mx31moboard-devboard.c | ||
| mx31moboard-marxbot.c | ||
| mx31moboard-smartbot.c | ||
| mx35.h | ||
| mxc.h | ||
| pcm037.h | ||
| platsmp.c | ||
| pm-imx5.c | ||
| pm-imx6.c | ||
| pm-imx25.c | ||
| pm-imx27.c | ||
| src.c | ||
| ssi-fiq-ksym.c | ||
| ssi-fiq.S | ||
| suspend-imx6.S | ||
| suspend-imx53.S | ||
| system.c | ||
| tzic.c | ||
| ulpi.h | ||