Pull second vfs pile from Al Viro: "The stuff in there: fsfreeze deadlock fixes by Jan (essentially, the deadlock reproduced by xfstests 068), symlink and hardlink restriction patches, plus assorted cleanups and fixes. Note that another fsfreeze deadlock (emergency thaw one) is *not* dealt with - the series by Fernando conflicts a lot with Jan's, breaks userland ABI (FIFREEZE semantics gets changed) and trades the deadlock for massive vfsmount leak; this is going to be handled next cycle. There probably will be another pull request, but that stuff won't be in it." Fix up trivial conflicts due to unrelated changes next to each other in drivers/{staging/gdm72xx/usb_boot.c, usb/gadget/storage_common.c} * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits) delousing target_core_file a bit Documentation: Correct s_umount state for freeze_fs/unfreeze_fs fs: Remove old freezing mechanism ext2: Implement freezing btrfs: Convert to new freezing mechanism nilfs2: Convert to new freezing mechanism ntfs: Convert to new freezing mechanism fuse: Convert to new freezing mechanism gfs2: Convert to new freezing mechanism ocfs2: Convert to new freezing mechanism xfs: Convert to new freezing code ext4: Convert to new freezing mechanism fs: Protect write paths by sb_start_write - sb_end_write fs: Skip atime update on frozen filesystem fs: Add freezing handling to mnt_want_write() / mnt_drop_write() fs: Improve filesystem freezing handling switch the protection of percpu_counter list to spinlock nfsd: Push mnt_want_write() outside of i_mutex btrfs: Push mnt_want_write() outside of i_mutex fat: Push mnt_want_write() outside of i_mutex ...
1235 lines
29 KiB
C
1235 lines
29 KiB
C
/*
|
|
* Copyright (c) 2010 Broadcom Corporation
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
|
|
* SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
|
|
* OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
|
|
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/kthread.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/mmc/sdio_func.h>
|
|
#include <linux/random.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/fcntl.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/hardirq.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/module.h>
|
|
#include <net/cfg80211.h>
|
|
#include <net/rtnetlink.h>
|
|
#include <defs.h>
|
|
#include <brcmu_utils.h>
|
|
#include <brcmu_wifi.h>
|
|
|
|
#include "dhd.h"
|
|
#include "dhd_bus.h"
|
|
#include "dhd_proto.h"
|
|
#include "dhd_dbg.h"
|
|
#include "wl_cfg80211.h"
|
|
|
|
MODULE_AUTHOR("Broadcom Corporation");
|
|
MODULE_DESCRIPTION("Broadcom 802.11n wireless LAN fullmac driver.");
|
|
MODULE_SUPPORTED_DEVICE("Broadcom 802.11n WLAN fullmac cards");
|
|
MODULE_LICENSE("Dual BSD/GPL");
|
|
|
|
|
|
/* Interface control information */
|
|
struct brcmf_if {
|
|
struct brcmf_pub *drvr; /* back pointer to brcmf_pub */
|
|
/* OS/stack specifics */
|
|
struct net_device *ndev;
|
|
struct net_device_stats stats;
|
|
int idx; /* iface idx in dongle */
|
|
u8 mac_addr[ETH_ALEN]; /* assigned MAC address */
|
|
};
|
|
|
|
/* Error bits */
|
|
int brcmf_msg_level = BRCMF_ERROR_VAL;
|
|
module_param(brcmf_msg_level, int, 0);
|
|
|
|
int brcmf_ifname2idx(struct brcmf_pub *drvr, char *name)
|
|
{
|
|
int i = BRCMF_MAX_IFS;
|
|
struct brcmf_if *ifp;
|
|
|
|
if (name == NULL || *name == '\0')
|
|
return 0;
|
|
|
|
while (--i > 0) {
|
|
ifp = drvr->iflist[i];
|
|
if (ifp && !strncmp(ifp->ndev->name, name, IFNAMSIZ))
|
|
break;
|
|
}
|
|
|
|
brcmf_dbg(TRACE, "return idx %d for \"%s\"\n", i, name);
|
|
|
|
return i; /* default - the primary interface */
|
|
}
|
|
|
|
char *brcmf_ifname(struct brcmf_pub *drvr, int ifidx)
|
|
{
|
|
if (ifidx < 0 || ifidx >= BRCMF_MAX_IFS) {
|
|
brcmf_dbg(ERROR, "ifidx %d out of range\n", ifidx);
|
|
return "<if_bad>";
|
|
}
|
|
|
|
if (drvr->iflist[ifidx] == NULL) {
|
|
brcmf_dbg(ERROR, "null i/f %d\n", ifidx);
|
|
return "<if_null>";
|
|
}
|
|
|
|
if (drvr->iflist[ifidx]->ndev)
|
|
return drvr->iflist[ifidx]->ndev->name;
|
|
|
|
return "<if_none>";
|
|
}
|
|
|
|
static void _brcmf_set_multicast_list(struct work_struct *work)
|
|
{
|
|
struct net_device *ndev;
|
|
struct netdev_hw_addr *ha;
|
|
u32 dcmd_value, cnt;
|
|
__le32 cnt_le;
|
|
__le32 dcmd_le_value;
|
|
|
|
struct brcmf_dcmd dcmd;
|
|
char *buf, *bufp;
|
|
uint buflen;
|
|
int ret;
|
|
|
|
struct brcmf_pub *drvr = container_of(work, struct brcmf_pub,
|
|
multicast_work);
|
|
|
|
ndev = drvr->iflist[0]->ndev;
|
|
cnt = netdev_mc_count(ndev);
|
|
|
|
/* Determine initial value of allmulti flag */
|
|
dcmd_value = (ndev->flags & IFF_ALLMULTI) ? true : false;
|
|
|
|
/* Send down the multicast list first. */
|
|
|
|
buflen = sizeof("mcast_list") + sizeof(cnt) + (cnt * ETH_ALEN);
|
|
bufp = buf = kmalloc(buflen, GFP_ATOMIC);
|
|
if (!bufp)
|
|
return;
|
|
|
|
strcpy(bufp, "mcast_list");
|
|
bufp += strlen("mcast_list") + 1;
|
|
|
|
cnt_le = cpu_to_le32(cnt);
|
|
memcpy(bufp, &cnt_le, sizeof(cnt));
|
|
bufp += sizeof(cnt_le);
|
|
|
|
netdev_for_each_mc_addr(ha, ndev) {
|
|
if (!cnt)
|
|
break;
|
|
memcpy(bufp, ha->addr, ETH_ALEN);
|
|
bufp += ETH_ALEN;
|
|
cnt--;
|
|
}
|
|
|
|
memset(&dcmd, 0, sizeof(dcmd));
|
|
dcmd.cmd = BRCMF_C_SET_VAR;
|
|
dcmd.buf = buf;
|
|
dcmd.len = buflen;
|
|
dcmd.set = true;
|
|
|
|
ret = brcmf_proto_dcmd(drvr, 0, &dcmd, dcmd.len);
|
|
if (ret < 0) {
|
|
brcmf_dbg(ERROR, "%s: set mcast_list failed, cnt %d\n",
|
|
brcmf_ifname(drvr, 0), cnt);
|
|
dcmd_value = cnt ? true : dcmd_value;
|
|
}
|
|
|
|
kfree(buf);
|
|
|
|
/* Now send the allmulti setting. This is based on the setting in the
|
|
* net_device flags, but might be modified above to be turned on if we
|
|
* were trying to set some addresses and dongle rejected it...
|
|
*/
|
|
|
|
buflen = sizeof("allmulti") + sizeof(dcmd_value);
|
|
buf = kmalloc(buflen, GFP_ATOMIC);
|
|
if (!buf)
|
|
return;
|
|
|
|
dcmd_le_value = cpu_to_le32(dcmd_value);
|
|
|
|
if (!brcmf_c_mkiovar
|
|
("allmulti", (void *)&dcmd_le_value,
|
|
sizeof(dcmd_le_value), buf, buflen)) {
|
|
brcmf_dbg(ERROR, "%s: mkiovar failed for allmulti, datalen %d buflen %u\n",
|
|
brcmf_ifname(drvr, 0),
|
|
(int)sizeof(dcmd_value), buflen);
|
|
kfree(buf);
|
|
return;
|
|
}
|
|
|
|
memset(&dcmd, 0, sizeof(dcmd));
|
|
dcmd.cmd = BRCMF_C_SET_VAR;
|
|
dcmd.buf = buf;
|
|
dcmd.len = buflen;
|
|
dcmd.set = true;
|
|
|
|
ret = brcmf_proto_dcmd(drvr, 0, &dcmd, dcmd.len);
|
|
if (ret < 0) {
|
|
brcmf_dbg(ERROR, "%s: set allmulti %d failed\n",
|
|
brcmf_ifname(drvr, 0),
|
|
le32_to_cpu(dcmd_le_value));
|
|
}
|
|
|
|
kfree(buf);
|
|
|
|
/* Finally, pick up the PROMISC flag as well, like the NIC
|
|
driver does */
|
|
|
|
dcmd_value = (ndev->flags & IFF_PROMISC) ? true : false;
|
|
dcmd_le_value = cpu_to_le32(dcmd_value);
|
|
|
|
memset(&dcmd, 0, sizeof(dcmd));
|
|
dcmd.cmd = BRCMF_C_SET_PROMISC;
|
|
dcmd.buf = &dcmd_le_value;
|
|
dcmd.len = sizeof(dcmd_le_value);
|
|
dcmd.set = true;
|
|
|
|
ret = brcmf_proto_dcmd(drvr, 0, &dcmd, dcmd.len);
|
|
if (ret < 0) {
|
|
brcmf_dbg(ERROR, "%s: set promisc %d failed\n",
|
|
brcmf_ifname(drvr, 0),
|
|
le32_to_cpu(dcmd_le_value));
|
|
}
|
|
}
|
|
|
|
static void
|
|
_brcmf_set_mac_address(struct work_struct *work)
|
|
{
|
|
char buf[32];
|
|
struct brcmf_dcmd dcmd;
|
|
int ret;
|
|
|
|
struct brcmf_pub *drvr = container_of(work, struct brcmf_pub,
|
|
setmacaddr_work);
|
|
|
|
brcmf_dbg(TRACE, "enter\n");
|
|
if (!brcmf_c_mkiovar("cur_etheraddr", (char *)drvr->macvalue,
|
|
ETH_ALEN, buf, 32)) {
|
|
brcmf_dbg(ERROR, "%s: mkiovar failed for cur_etheraddr\n",
|
|
brcmf_ifname(drvr, 0));
|
|
return;
|
|
}
|
|
memset(&dcmd, 0, sizeof(dcmd));
|
|
dcmd.cmd = BRCMF_C_SET_VAR;
|
|
dcmd.buf = buf;
|
|
dcmd.len = 32;
|
|
dcmd.set = true;
|
|
|
|
ret = brcmf_proto_dcmd(drvr, 0, &dcmd, dcmd.len);
|
|
if (ret < 0)
|
|
brcmf_dbg(ERROR, "%s: set cur_etheraddr failed\n",
|
|
brcmf_ifname(drvr, 0));
|
|
else
|
|
memcpy(drvr->iflist[0]->ndev->dev_addr,
|
|
drvr->macvalue, ETH_ALEN);
|
|
|
|
return;
|
|
}
|
|
|
|
static int brcmf_netdev_set_mac_address(struct net_device *ndev, void *addr)
|
|
{
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
struct sockaddr *sa = (struct sockaddr *)addr;
|
|
|
|
memcpy(&drvr->macvalue, sa->sa_data, ETH_ALEN);
|
|
schedule_work(&drvr->setmacaddr_work);
|
|
return 0;
|
|
}
|
|
|
|
static void brcmf_netdev_set_multicast_list(struct net_device *ndev)
|
|
{
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
|
|
schedule_work(&drvr->multicast_work);
|
|
}
|
|
|
|
int brcmf_sendpkt(struct brcmf_pub *drvr, int ifidx, struct sk_buff *pktbuf)
|
|
{
|
|
/* Reject if down */
|
|
if (!drvr->bus_if->drvr_up || (drvr->bus_if->state == BRCMF_BUS_DOWN))
|
|
return -ENODEV;
|
|
|
|
/* Update multicast statistic */
|
|
if (pktbuf->len >= ETH_ALEN) {
|
|
u8 *pktdata = (u8 *) (pktbuf->data);
|
|
struct ethhdr *eh = (struct ethhdr *)pktdata;
|
|
|
|
if (is_multicast_ether_addr(eh->h_dest))
|
|
drvr->tx_multicast++;
|
|
if (ntohs(eh->h_proto) == ETH_P_PAE)
|
|
atomic_inc(&drvr->pend_8021x_cnt);
|
|
}
|
|
|
|
/* If the protocol uses a data header, apply it */
|
|
brcmf_proto_hdrpush(drvr, ifidx, pktbuf);
|
|
|
|
/* Use bus module to send data frame */
|
|
return drvr->bus_if->brcmf_bus_txdata(drvr->dev, pktbuf);
|
|
}
|
|
|
|
static int brcmf_netdev_start_xmit(struct sk_buff *skb, struct net_device *ndev)
|
|
{
|
|
int ret;
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
|
|
/* Reject if down */
|
|
if (!drvr->bus_if->drvr_up ||
|
|
(drvr->bus_if->state == BRCMF_BUS_DOWN)) {
|
|
brcmf_dbg(ERROR, "xmit rejected drvup=%d state=%d\n",
|
|
drvr->bus_if->drvr_up,
|
|
drvr->bus_if->state);
|
|
netif_stop_queue(ndev);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (!drvr->iflist[ifp->idx]) {
|
|
brcmf_dbg(ERROR, "bad ifidx %d\n", ifp->idx);
|
|
netif_stop_queue(ndev);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Make sure there's enough room for any header */
|
|
if (skb_headroom(skb) < drvr->hdrlen) {
|
|
struct sk_buff *skb2;
|
|
|
|
brcmf_dbg(INFO, "%s: insufficient headroom\n",
|
|
brcmf_ifname(drvr, ifp->idx));
|
|
drvr->bus_if->tx_realloc++;
|
|
skb2 = skb_realloc_headroom(skb, drvr->hdrlen);
|
|
dev_kfree_skb(skb);
|
|
skb = skb2;
|
|
if (skb == NULL) {
|
|
brcmf_dbg(ERROR, "%s: skb_realloc_headroom failed\n",
|
|
brcmf_ifname(drvr, ifp->idx));
|
|
ret = -ENOMEM;
|
|
goto done;
|
|
}
|
|
}
|
|
|
|
ret = brcmf_sendpkt(drvr, ifp->idx, skb);
|
|
|
|
done:
|
|
if (ret)
|
|
drvr->bus_if->dstats.tx_dropped++;
|
|
else
|
|
drvr->bus_if->dstats.tx_packets++;
|
|
|
|
/* Return ok: we always eat the packet */
|
|
return 0;
|
|
}
|
|
|
|
void brcmf_txflowcontrol(struct device *dev, int ifidx, bool state)
|
|
{
|
|
struct net_device *ndev;
|
|
struct brcmf_bus *bus_if = dev_get_drvdata(dev);
|
|
struct brcmf_pub *drvr = bus_if->drvr;
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
|
|
ndev = drvr->iflist[ifidx]->ndev;
|
|
if (state == ON)
|
|
netif_stop_queue(ndev);
|
|
else
|
|
netif_wake_queue(ndev);
|
|
}
|
|
|
|
static int brcmf_host_event(struct brcmf_pub *drvr, int *ifidx,
|
|
void *pktdata, struct brcmf_event_msg *event,
|
|
void **data)
|
|
{
|
|
int bcmerror = 0;
|
|
|
|
bcmerror = brcmf_c_host_event(drvr, ifidx, pktdata, event, data);
|
|
if (bcmerror != 0)
|
|
return bcmerror;
|
|
|
|
if (drvr->iflist[*ifidx]->ndev)
|
|
brcmf_cfg80211_event(drvr->iflist[*ifidx]->ndev,
|
|
event, *data);
|
|
|
|
return bcmerror;
|
|
}
|
|
|
|
void brcmf_rx_frame(struct device *dev, int ifidx,
|
|
struct sk_buff_head *skb_list)
|
|
{
|
|
unsigned char *eth;
|
|
uint len;
|
|
void *data;
|
|
struct sk_buff *skb, *pnext;
|
|
struct brcmf_if *ifp;
|
|
struct brcmf_event_msg event;
|
|
struct brcmf_bus *bus_if = dev_get_drvdata(dev);
|
|
struct brcmf_pub *drvr = bus_if->drvr;
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
|
|
skb_queue_walk_safe(skb_list, skb, pnext) {
|
|
skb_unlink(skb, skb_list);
|
|
|
|
/* Get the protocol, maintain skb around eth_type_trans()
|
|
* The main reason for this hack is for the limitation of
|
|
* Linux 2.4 where 'eth_type_trans' uses the
|
|
* 'net->hard_header_len'
|
|
* to perform skb_pull inside vs ETH_HLEN. Since to avoid
|
|
* coping of the packet coming from the network stack to add
|
|
* BDC, Hardware header etc, during network interface
|
|
* registration
|
|
* we set the 'net->hard_header_len' to ETH_HLEN + extra space
|
|
* required
|
|
* for BDC, Hardware header etc. and not just the ETH_HLEN
|
|
*/
|
|
eth = skb->data;
|
|
len = skb->len;
|
|
|
|
ifp = drvr->iflist[ifidx];
|
|
if (ifp == NULL)
|
|
ifp = drvr->iflist[0];
|
|
|
|
if (!ifp || !ifp->ndev ||
|
|
ifp->ndev->reg_state != NETREG_REGISTERED) {
|
|
brcmu_pkt_buf_free_skb(skb);
|
|
continue;
|
|
}
|
|
|
|
skb->dev = ifp->ndev;
|
|
skb->protocol = eth_type_trans(skb, skb->dev);
|
|
|
|
if (skb->pkt_type == PACKET_MULTICAST)
|
|
bus_if->dstats.multicast++;
|
|
|
|
skb->data = eth;
|
|
skb->len = len;
|
|
|
|
/* Strip header, count, deliver upward */
|
|
skb_pull(skb, ETH_HLEN);
|
|
|
|
/* Process special event packets and then discard them */
|
|
if (ntohs(skb->protocol) == ETH_P_LINK_CTL)
|
|
brcmf_host_event(drvr, &ifidx,
|
|
skb_mac_header(skb),
|
|
&event, &data);
|
|
|
|
if (drvr->iflist[ifidx]) {
|
|
ifp = drvr->iflist[ifidx];
|
|
ifp->ndev->last_rx = jiffies;
|
|
}
|
|
|
|
bus_if->dstats.rx_bytes += skb->len;
|
|
bus_if->dstats.rx_packets++; /* Local count */
|
|
|
|
if (in_interrupt())
|
|
netif_rx(skb);
|
|
else
|
|
/* If the receive is not processed inside an ISR,
|
|
* the softirqd must be woken explicitly to service
|
|
* the NET_RX_SOFTIRQ. In 2.6 kernels, this is handled
|
|
* by netif_rx_ni(), but in earlier kernels, we need
|
|
* to do it manually.
|
|
*/
|
|
netif_rx_ni(skb);
|
|
}
|
|
}
|
|
|
|
void brcmf_txcomplete(struct device *dev, struct sk_buff *txp, bool success)
|
|
{
|
|
uint ifidx;
|
|
struct ethhdr *eh;
|
|
u16 type;
|
|
struct brcmf_bus *bus_if = dev_get_drvdata(dev);
|
|
struct brcmf_pub *drvr = bus_if->drvr;
|
|
|
|
brcmf_proto_hdrpull(dev, &ifidx, txp);
|
|
|
|
eh = (struct ethhdr *)(txp->data);
|
|
type = ntohs(eh->h_proto);
|
|
|
|
if (type == ETH_P_PAE)
|
|
atomic_dec(&drvr->pend_8021x_cnt);
|
|
|
|
}
|
|
|
|
static struct net_device_stats *brcmf_netdev_get_stats(struct net_device *ndev)
|
|
{
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_bus *bus_if = ifp->drvr->bus_if;
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
|
|
/* Copy dongle stats to net device stats */
|
|
ifp->stats.rx_packets = bus_if->dstats.rx_packets;
|
|
ifp->stats.tx_packets = bus_if->dstats.tx_packets;
|
|
ifp->stats.rx_bytes = bus_if->dstats.rx_bytes;
|
|
ifp->stats.tx_bytes = bus_if->dstats.tx_bytes;
|
|
ifp->stats.rx_errors = bus_if->dstats.rx_errors;
|
|
ifp->stats.tx_errors = bus_if->dstats.tx_errors;
|
|
ifp->stats.rx_dropped = bus_if->dstats.rx_dropped;
|
|
ifp->stats.tx_dropped = bus_if->dstats.tx_dropped;
|
|
ifp->stats.multicast = bus_if->dstats.multicast;
|
|
|
|
return &ifp->stats;
|
|
}
|
|
|
|
/* Retrieve current toe component enables, which are kept
|
|
as a bitmap in toe_ol iovar */
|
|
static int brcmf_toe_get(struct brcmf_pub *drvr, int ifidx, u32 *toe_ol)
|
|
{
|
|
struct brcmf_dcmd dcmd;
|
|
__le32 toe_le;
|
|
char buf[32];
|
|
int ret;
|
|
|
|
memset(&dcmd, 0, sizeof(dcmd));
|
|
|
|
dcmd.cmd = BRCMF_C_GET_VAR;
|
|
dcmd.buf = buf;
|
|
dcmd.len = (uint) sizeof(buf);
|
|
dcmd.set = false;
|
|
|
|
strcpy(buf, "toe_ol");
|
|
ret = brcmf_proto_dcmd(drvr, ifidx, &dcmd, dcmd.len);
|
|
if (ret < 0) {
|
|
/* Check for older dongle image that doesn't support toe_ol */
|
|
if (ret == -EIO) {
|
|
brcmf_dbg(ERROR, "%s: toe not supported by device\n",
|
|
brcmf_ifname(drvr, ifidx));
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
brcmf_dbg(INFO, "%s: could not get toe_ol: ret=%d\n",
|
|
brcmf_ifname(drvr, ifidx), ret);
|
|
return ret;
|
|
}
|
|
|
|
memcpy(&toe_le, buf, sizeof(u32));
|
|
*toe_ol = le32_to_cpu(toe_le);
|
|
return 0;
|
|
}
|
|
|
|
/* Set current toe component enables in toe_ol iovar,
|
|
and set toe global enable iovar */
|
|
static int brcmf_toe_set(struct brcmf_pub *drvr, int ifidx, u32 toe_ol)
|
|
{
|
|
struct brcmf_dcmd dcmd;
|
|
char buf[32];
|
|
int ret;
|
|
__le32 toe_le = cpu_to_le32(toe_ol);
|
|
|
|
memset(&dcmd, 0, sizeof(dcmd));
|
|
|
|
dcmd.cmd = BRCMF_C_SET_VAR;
|
|
dcmd.buf = buf;
|
|
dcmd.len = (uint) sizeof(buf);
|
|
dcmd.set = true;
|
|
|
|
/* Set toe_ol as requested */
|
|
strcpy(buf, "toe_ol");
|
|
memcpy(&buf[sizeof("toe_ol")], &toe_le, sizeof(u32));
|
|
|
|
ret = brcmf_proto_dcmd(drvr, ifidx, &dcmd, dcmd.len);
|
|
if (ret < 0) {
|
|
brcmf_dbg(ERROR, "%s: could not set toe_ol: ret=%d\n",
|
|
brcmf_ifname(drvr, ifidx), ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Enable toe globally only if any components are enabled. */
|
|
toe_le = cpu_to_le32(toe_ol != 0);
|
|
|
|
strcpy(buf, "toe");
|
|
memcpy(&buf[sizeof("toe")], &toe_le, sizeof(u32));
|
|
|
|
ret = brcmf_proto_dcmd(drvr, ifidx, &dcmd, dcmd.len);
|
|
if (ret < 0) {
|
|
brcmf_dbg(ERROR, "%s: could not set toe: ret=%d\n",
|
|
brcmf_ifname(drvr, ifidx), ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void brcmf_ethtool_get_drvinfo(struct net_device *ndev,
|
|
struct ethtool_drvinfo *info)
|
|
{
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
|
|
sprintf(info->driver, KBUILD_MODNAME);
|
|
sprintf(info->version, "%lu", drvr->drv_version);
|
|
sprintf(info->bus_info, "%s", dev_name(drvr->dev));
|
|
}
|
|
|
|
static const struct ethtool_ops brcmf_ethtool_ops = {
|
|
.get_drvinfo = brcmf_ethtool_get_drvinfo,
|
|
};
|
|
|
|
static int brcmf_ethtool(struct brcmf_pub *drvr, void __user *uaddr)
|
|
{
|
|
struct ethtool_drvinfo info;
|
|
char drvname[sizeof(info.driver)];
|
|
u32 cmd;
|
|
struct ethtool_value edata;
|
|
u32 toe_cmpnt, csum_dir;
|
|
int ret;
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
|
|
/* all ethtool calls start with a cmd word */
|
|
if (copy_from_user(&cmd, uaddr, sizeof(u32)))
|
|
return -EFAULT;
|
|
|
|
switch (cmd) {
|
|
case ETHTOOL_GDRVINFO:
|
|
/* Copy out any request driver name */
|
|
if (copy_from_user(&info, uaddr, sizeof(info)))
|
|
return -EFAULT;
|
|
strncpy(drvname, info.driver, sizeof(info.driver));
|
|
drvname[sizeof(info.driver) - 1] = '\0';
|
|
|
|
/* clear struct for return */
|
|
memset(&info, 0, sizeof(info));
|
|
info.cmd = cmd;
|
|
|
|
/* if requested, identify ourselves */
|
|
if (strcmp(drvname, "?dhd") == 0) {
|
|
sprintf(info.driver, "dhd");
|
|
strcpy(info.version, BRCMF_VERSION_STR);
|
|
}
|
|
|
|
/* otherwise, require dongle to be up */
|
|
else if (!drvr->bus_if->drvr_up) {
|
|
brcmf_dbg(ERROR, "dongle is not up\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* finally, report dongle driver type */
|
|
else if (drvr->iswl)
|
|
sprintf(info.driver, "wl");
|
|
else
|
|
sprintf(info.driver, "xx");
|
|
|
|
sprintf(info.version, "%lu", drvr->drv_version);
|
|
if (copy_to_user(uaddr, &info, sizeof(info)))
|
|
return -EFAULT;
|
|
brcmf_dbg(CTL, "given %*s, returning %s\n",
|
|
(int)sizeof(drvname), drvname, info.driver);
|
|
break;
|
|
|
|
/* Get toe offload components from dongle */
|
|
case ETHTOOL_GRXCSUM:
|
|
case ETHTOOL_GTXCSUM:
|
|
ret = brcmf_toe_get(drvr, 0, &toe_cmpnt);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
csum_dir =
|
|
(cmd == ETHTOOL_GTXCSUM) ? TOE_TX_CSUM_OL : TOE_RX_CSUM_OL;
|
|
|
|
edata.cmd = cmd;
|
|
edata.data = (toe_cmpnt & csum_dir) ? 1 : 0;
|
|
|
|
if (copy_to_user(uaddr, &edata, sizeof(edata)))
|
|
return -EFAULT;
|
|
break;
|
|
|
|
/* Set toe offload components in dongle */
|
|
case ETHTOOL_SRXCSUM:
|
|
case ETHTOOL_STXCSUM:
|
|
if (copy_from_user(&edata, uaddr, sizeof(edata)))
|
|
return -EFAULT;
|
|
|
|
/* Read the current settings, update and write back */
|
|
ret = brcmf_toe_get(drvr, 0, &toe_cmpnt);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
csum_dir =
|
|
(cmd == ETHTOOL_STXCSUM) ? TOE_TX_CSUM_OL : TOE_RX_CSUM_OL;
|
|
|
|
if (edata.data != 0)
|
|
toe_cmpnt |= csum_dir;
|
|
else
|
|
toe_cmpnt &= ~csum_dir;
|
|
|
|
ret = brcmf_toe_set(drvr, 0, toe_cmpnt);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* If setting TX checksum mode, tell Linux the new mode */
|
|
if (cmd == ETHTOOL_STXCSUM) {
|
|
if (edata.data)
|
|
drvr->iflist[0]->ndev->features |=
|
|
NETIF_F_IP_CSUM;
|
|
else
|
|
drvr->iflist[0]->ndev->features &=
|
|
~NETIF_F_IP_CSUM;
|
|
}
|
|
|
|
break;
|
|
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int brcmf_netdev_ioctl_entry(struct net_device *ndev, struct ifreq *ifr,
|
|
int cmd)
|
|
{
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
|
|
brcmf_dbg(TRACE, "ifidx %d, cmd 0x%04x\n", ifp->idx, cmd);
|
|
|
|
if (!drvr->iflist[ifp->idx])
|
|
return -1;
|
|
|
|
if (cmd == SIOCETHTOOL)
|
|
return brcmf_ethtool(drvr, ifr->ifr_data);
|
|
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
/* called only from within this driver. Sends a command to the dongle. */
|
|
s32 brcmf_exec_dcmd(struct net_device *ndev, u32 cmd, void *arg, u32 len)
|
|
{
|
|
struct brcmf_dcmd dcmd;
|
|
s32 err = 0;
|
|
int buflen = 0;
|
|
bool is_set_key_cmd;
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
|
|
memset(&dcmd, 0, sizeof(dcmd));
|
|
dcmd.cmd = cmd;
|
|
dcmd.buf = arg;
|
|
dcmd.len = len;
|
|
|
|
if (dcmd.buf != NULL)
|
|
buflen = min_t(uint, dcmd.len, BRCMF_DCMD_MAXLEN);
|
|
|
|
/* send to dongle (must be up, and wl) */
|
|
if ((drvr->bus_if->state != BRCMF_BUS_DATA)) {
|
|
brcmf_dbg(ERROR, "DONGLE_DOWN\n");
|
|
err = -EIO;
|
|
goto done;
|
|
}
|
|
|
|
if (!drvr->iswl) {
|
|
err = -EIO;
|
|
goto done;
|
|
}
|
|
|
|
/*
|
|
* Intercept BRCMF_C_SET_KEY CMD - serialize M4 send and
|
|
* set key CMD to prevent M4 encryption.
|
|
*/
|
|
is_set_key_cmd = ((dcmd.cmd == BRCMF_C_SET_KEY) ||
|
|
((dcmd.cmd == BRCMF_C_SET_VAR) &&
|
|
!(strncmp("wsec_key", dcmd.buf, 9))) ||
|
|
((dcmd.cmd == BRCMF_C_SET_VAR) &&
|
|
!(strncmp("bsscfg:wsec_key", dcmd.buf, 15))));
|
|
if (is_set_key_cmd)
|
|
brcmf_netdev_wait_pend8021x(ndev);
|
|
|
|
err = brcmf_proto_dcmd(drvr, ifp->idx, &dcmd, buflen);
|
|
|
|
done:
|
|
if (err > 0)
|
|
err = 0;
|
|
|
|
return err;
|
|
}
|
|
|
|
static int brcmf_netdev_stop(struct net_device *ndev)
|
|
{
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
brcmf_cfg80211_down(drvr->config);
|
|
if (drvr->bus_if->drvr_up == 0)
|
|
return 0;
|
|
|
|
/* Set state and stop OS transmissions */
|
|
drvr->bus_if->drvr_up = false;
|
|
netif_stop_queue(ndev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int brcmf_netdev_open(struct net_device *ndev)
|
|
{
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
struct brcmf_bus *bus_if = drvr->bus_if;
|
|
u32 toe_ol;
|
|
s32 ret = 0;
|
|
uint up = 0;
|
|
|
|
brcmf_dbg(TRACE, "ifidx %d\n", ifp->idx);
|
|
|
|
if (ifp->idx == 0) { /* do it only for primary eth0 */
|
|
/* If bus is not ready, can't continue */
|
|
if (bus_if->state != BRCMF_BUS_DATA) {
|
|
brcmf_dbg(ERROR, "failed bus is not ready\n");
|
|
return -EAGAIN;
|
|
}
|
|
|
|
atomic_set(&drvr->pend_8021x_cnt, 0);
|
|
|
|
memcpy(ndev->dev_addr, drvr->mac, ETH_ALEN);
|
|
|
|
/* Get current TOE mode from dongle */
|
|
if (brcmf_toe_get(drvr, ifp->idx, &toe_ol) >= 0
|
|
&& (toe_ol & TOE_TX_CSUM_OL) != 0)
|
|
drvr->iflist[ifp->idx]->ndev->features |=
|
|
NETIF_F_IP_CSUM;
|
|
else
|
|
drvr->iflist[ifp->idx]->ndev->features &=
|
|
~NETIF_F_IP_CSUM;
|
|
}
|
|
|
|
/* make sure RF is ready for work */
|
|
brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_UP, (char *)&up, sizeof(up));
|
|
|
|
/* Allow transmit calls */
|
|
netif_start_queue(ndev);
|
|
drvr->bus_if->drvr_up = true;
|
|
if (brcmf_cfg80211_up(drvr->config)) {
|
|
brcmf_dbg(ERROR, "failed to bring up cfg80211\n");
|
|
return -1;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct net_device_ops brcmf_netdev_ops_pri = {
|
|
.ndo_open = brcmf_netdev_open,
|
|
.ndo_stop = brcmf_netdev_stop,
|
|
.ndo_get_stats = brcmf_netdev_get_stats,
|
|
.ndo_do_ioctl = brcmf_netdev_ioctl_entry,
|
|
.ndo_start_xmit = brcmf_netdev_start_xmit,
|
|
.ndo_set_mac_address = brcmf_netdev_set_mac_address,
|
|
.ndo_set_rx_mode = brcmf_netdev_set_multicast_list
|
|
};
|
|
|
|
static int brcmf_net_attach(struct brcmf_if *ifp)
|
|
{
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
struct net_device *ndev;
|
|
u8 temp_addr[ETH_ALEN];
|
|
|
|
brcmf_dbg(TRACE, "ifidx %d\n", ifp->idx);
|
|
|
|
ndev = drvr->iflist[ifp->idx]->ndev;
|
|
ndev->netdev_ops = &brcmf_netdev_ops_pri;
|
|
|
|
/*
|
|
* determine mac address to use
|
|
*/
|
|
if (is_valid_ether_addr(ifp->mac_addr))
|
|
memcpy(temp_addr, ifp->mac_addr, ETH_ALEN);
|
|
else
|
|
memcpy(temp_addr, drvr->mac, ETH_ALEN);
|
|
|
|
if (ifp->idx == 1) {
|
|
brcmf_dbg(TRACE, "ACCESS POINT MAC:\n");
|
|
/* ACCESSPOINT INTERFACE CASE */
|
|
temp_addr[0] |= 0X02; /* set bit 2 ,
|
|
- Locally Administered address */
|
|
|
|
}
|
|
ndev->hard_header_len = ETH_HLEN + drvr->hdrlen;
|
|
ndev->ethtool_ops = &brcmf_ethtool_ops;
|
|
|
|
drvr->rxsz = ndev->mtu + ndev->hard_header_len +
|
|
drvr->hdrlen;
|
|
|
|
memcpy(ndev->dev_addr, temp_addr, ETH_ALEN);
|
|
|
|
/* attach to cfg80211 for primary interface */
|
|
if (!ifp->idx) {
|
|
drvr->config = brcmf_cfg80211_attach(ndev, drvr->dev, drvr);
|
|
if (drvr->config == NULL) {
|
|
brcmf_dbg(ERROR, "wl_cfg80211_attach failed\n");
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
if (register_netdev(ndev) != 0) {
|
|
brcmf_dbg(ERROR, "couldn't register the net device\n");
|
|
goto fail;
|
|
}
|
|
|
|
brcmf_dbg(INFO, "%s: Broadcom Dongle Host Driver\n", ndev->name);
|
|
|
|
return 0;
|
|
|
|
fail:
|
|
ndev->netdev_ops = NULL;
|
|
return -EBADE;
|
|
}
|
|
|
|
int
|
|
brcmf_add_if(struct device *dev, int ifidx, char *name, u8 *mac_addr)
|
|
{
|
|
struct brcmf_if *ifp;
|
|
struct net_device *ndev;
|
|
struct brcmf_bus *bus_if = dev_get_drvdata(dev);
|
|
struct brcmf_pub *drvr = bus_if->drvr;
|
|
|
|
brcmf_dbg(TRACE, "idx %d\n", ifidx);
|
|
|
|
ifp = drvr->iflist[ifidx];
|
|
/*
|
|
* Delete the existing interface before overwriting it
|
|
* in case we missed the BRCMF_E_IF_DEL event.
|
|
*/
|
|
if (ifp) {
|
|
brcmf_dbg(ERROR, "ERROR: netdev:%s already exists, try free & unregister\n",
|
|
ifp->ndev->name);
|
|
netif_stop_queue(ifp->ndev);
|
|
unregister_netdev(ifp->ndev);
|
|
free_netdev(ifp->ndev);
|
|
drvr->iflist[ifidx] = NULL;
|
|
}
|
|
|
|
/* Allocate netdev, including space for private structure */
|
|
ndev = alloc_netdev(sizeof(struct brcmf_if), name, ether_setup);
|
|
if (!ndev) {
|
|
brcmf_dbg(ERROR, "OOM - alloc_netdev\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
ifp = netdev_priv(ndev);
|
|
ifp->ndev = ndev;
|
|
ifp->drvr = drvr;
|
|
drvr->iflist[ifidx] = ifp;
|
|
ifp->idx = ifidx;
|
|
if (mac_addr != NULL)
|
|
memcpy(&ifp->mac_addr, mac_addr, ETH_ALEN);
|
|
|
|
if (brcmf_net_attach(ifp)) {
|
|
brcmf_dbg(ERROR, "brcmf_net_attach failed");
|
|
free_netdev(ifp->ndev);
|
|
drvr->iflist[ifidx] = NULL;
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
brcmf_dbg(TRACE, " ==== pid:%x, net_device for if:%s created ===\n",
|
|
current->pid, ifp->ndev->name);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void brcmf_del_if(struct brcmf_pub *drvr, int ifidx)
|
|
{
|
|
struct brcmf_if *ifp;
|
|
|
|
brcmf_dbg(TRACE, "idx %d\n", ifidx);
|
|
|
|
ifp = drvr->iflist[ifidx];
|
|
if (!ifp) {
|
|
brcmf_dbg(ERROR, "Null interface\n");
|
|
return;
|
|
}
|
|
if (ifp->ndev) {
|
|
if (ifidx == 0) {
|
|
if (ifp->ndev->netdev_ops == &brcmf_netdev_ops_pri) {
|
|
rtnl_lock();
|
|
brcmf_netdev_stop(ifp->ndev);
|
|
rtnl_unlock();
|
|
}
|
|
} else {
|
|
netif_stop_queue(ifp->ndev);
|
|
}
|
|
|
|
unregister_netdev(ifp->ndev);
|
|
drvr->iflist[ifidx] = NULL;
|
|
if (ifidx == 0)
|
|
brcmf_cfg80211_detach(drvr->config);
|
|
free_netdev(ifp->ndev);
|
|
}
|
|
}
|
|
|
|
int brcmf_attach(uint bus_hdrlen, struct device *dev)
|
|
{
|
|
struct brcmf_pub *drvr = NULL;
|
|
int ret = 0;
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
|
|
/* Allocate primary brcmf_info */
|
|
drvr = kzalloc(sizeof(struct brcmf_pub), GFP_ATOMIC);
|
|
if (!drvr)
|
|
return -ENOMEM;
|
|
|
|
mutex_init(&drvr->proto_block);
|
|
|
|
/* Link to bus module */
|
|
drvr->hdrlen = bus_hdrlen;
|
|
drvr->bus_if = dev_get_drvdata(dev);
|
|
drvr->bus_if->drvr = drvr;
|
|
drvr->dev = dev;
|
|
|
|
/* create device debugfs folder */
|
|
brcmf_debugfs_attach(drvr);
|
|
|
|
/* Attach and link in the protocol */
|
|
ret = brcmf_proto_attach(drvr);
|
|
if (ret != 0) {
|
|
brcmf_dbg(ERROR, "brcmf_prot_attach failed\n");
|
|
goto fail;
|
|
}
|
|
|
|
INIT_WORK(&drvr->setmacaddr_work, _brcmf_set_mac_address);
|
|
INIT_WORK(&drvr->multicast_work, _brcmf_set_multicast_list);
|
|
|
|
INIT_LIST_HEAD(&drvr->bus_if->dcmd_list);
|
|
|
|
return ret;
|
|
|
|
fail:
|
|
brcmf_detach(dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
int brcmf_bus_start(struct device *dev)
|
|
{
|
|
int ret = -1;
|
|
/* Room for "event_msgs" + '\0' + bitvec */
|
|
char iovbuf[BRCMF_EVENTING_MASK_LEN + 12];
|
|
struct brcmf_bus *bus_if = dev_get_drvdata(dev);
|
|
struct brcmf_pub *drvr = bus_if->drvr;
|
|
|
|
brcmf_dbg(TRACE, "\n");
|
|
|
|
/* Bring up the bus */
|
|
ret = bus_if->brcmf_bus_init(dev);
|
|
if (ret != 0) {
|
|
brcmf_dbg(ERROR, "brcmf_sdbrcm_bus_init failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
brcmf_c_mkiovar("event_msgs", drvr->eventmask, BRCMF_EVENTING_MASK_LEN,
|
|
iovbuf, sizeof(iovbuf));
|
|
brcmf_proto_cdc_query_dcmd(drvr, 0, BRCMF_C_GET_VAR, iovbuf,
|
|
sizeof(iovbuf));
|
|
memcpy(drvr->eventmask, iovbuf, BRCMF_EVENTING_MASK_LEN);
|
|
|
|
setbit(drvr->eventmask, BRCMF_E_SET_SSID);
|
|
setbit(drvr->eventmask, BRCMF_E_PRUNE);
|
|
setbit(drvr->eventmask, BRCMF_E_AUTH);
|
|
setbit(drvr->eventmask, BRCMF_E_REASSOC);
|
|
setbit(drvr->eventmask, BRCMF_E_REASSOC_IND);
|
|
setbit(drvr->eventmask, BRCMF_E_DEAUTH_IND);
|
|
setbit(drvr->eventmask, BRCMF_E_DISASSOC_IND);
|
|
setbit(drvr->eventmask, BRCMF_E_DISASSOC);
|
|
setbit(drvr->eventmask, BRCMF_E_JOIN);
|
|
setbit(drvr->eventmask, BRCMF_E_ASSOC_IND);
|
|
setbit(drvr->eventmask, BRCMF_E_PSK_SUP);
|
|
setbit(drvr->eventmask, BRCMF_E_LINK);
|
|
setbit(drvr->eventmask, BRCMF_E_NDIS_LINK);
|
|
setbit(drvr->eventmask, BRCMF_E_MIC_ERROR);
|
|
setbit(drvr->eventmask, BRCMF_E_PMKID_CACHE);
|
|
setbit(drvr->eventmask, BRCMF_E_TXFAIL);
|
|
setbit(drvr->eventmask, BRCMF_E_JOIN_START);
|
|
setbit(drvr->eventmask, BRCMF_E_SCAN_COMPLETE);
|
|
|
|
/* enable dongle roaming event */
|
|
|
|
drvr->pktfilter_count = 1;
|
|
/* Setup filter to allow only unicast */
|
|
drvr->pktfilter[0] = "100 0 0 0 0x01 0x00";
|
|
|
|
/* Bus is ready, do any protocol initialization */
|
|
ret = brcmf_proto_init(drvr);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* add primary networking interface */
|
|
ret = brcmf_add_if(dev, 0, "wlan%d", drvr->mac);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* signal bus ready */
|
|
bus_if->state = BRCMF_BUS_DATA;
|
|
return 0;
|
|
}
|
|
|
|
static void brcmf_bus_detach(struct brcmf_pub *drvr)
|
|
{
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
|
|
if (drvr) {
|
|
/* Stop the protocol module */
|
|
brcmf_proto_stop(drvr);
|
|
|
|
/* Stop the bus module */
|
|
drvr->bus_if->brcmf_bus_stop(drvr->dev);
|
|
}
|
|
}
|
|
|
|
void brcmf_detach(struct device *dev)
|
|
{
|
|
int i;
|
|
struct brcmf_bus *bus_if = dev_get_drvdata(dev);
|
|
struct brcmf_pub *drvr = bus_if->drvr;
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
|
|
|
|
/* make sure primary interface removed last */
|
|
for (i = BRCMF_MAX_IFS-1; i > -1; i--)
|
|
if (drvr->iflist[i])
|
|
brcmf_del_if(drvr, i);
|
|
|
|
brcmf_bus_detach(drvr);
|
|
|
|
if (drvr->prot) {
|
|
cancel_work_sync(&drvr->setmacaddr_work);
|
|
cancel_work_sync(&drvr->multicast_work);
|
|
brcmf_proto_detach(drvr);
|
|
}
|
|
|
|
brcmf_debugfs_detach(drvr);
|
|
bus_if->drvr = NULL;
|
|
kfree(drvr);
|
|
}
|
|
|
|
static int brcmf_get_pend_8021x_cnt(struct brcmf_pub *drvr)
|
|
{
|
|
return atomic_read(&drvr->pend_8021x_cnt);
|
|
}
|
|
|
|
#define MAX_WAIT_FOR_8021X_TX 10
|
|
|
|
int brcmf_netdev_wait_pend8021x(struct net_device *ndev)
|
|
{
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
int timeout = 10 * HZ / 1000;
|
|
int ntimes = MAX_WAIT_FOR_8021X_TX;
|
|
int pend = brcmf_get_pend_8021x_cnt(drvr);
|
|
|
|
while (ntimes && pend) {
|
|
if (pend) {
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
schedule_timeout(timeout);
|
|
set_current_state(TASK_RUNNING);
|
|
ntimes--;
|
|
}
|
|
pend = brcmf_get_pend_8021x_cnt(drvr);
|
|
}
|
|
return pend;
|
|
}
|
|
|
|
#ifdef DEBUG
|
|
int brcmf_write_to_file(struct brcmf_pub *drvr, const u8 *buf, int size)
|
|
{
|
|
int ret = 0;
|
|
struct file *fp;
|
|
mm_segment_t old_fs;
|
|
loff_t pos = 0;
|
|
|
|
/* change to KERNEL_DS address limit */
|
|
old_fs = get_fs();
|
|
set_fs(KERNEL_DS);
|
|
|
|
/* open file to write */
|
|
fp = filp_open("/tmp/mem_dump", O_WRONLY | O_CREAT, 0640);
|
|
if (!fp) {
|
|
brcmf_dbg(ERROR, "open file error\n");
|
|
ret = -1;
|
|
goto exit;
|
|
}
|
|
|
|
/* Write buf to file */
|
|
fp->f_op->write(fp, (char __user *)buf, size, &pos);
|
|
|
|
exit:
|
|
/* free buf before return */
|
|
kfree(buf);
|
|
/* close file before return */
|
|
if (fp)
|
|
filp_close(fp, NULL);
|
|
/* restore previous address limit */
|
|
set_fs(old_fs);
|
|
|
|
return ret;
|
|
}
|
|
#endif /* DEBUG */
|
|
|
|
static void brcmf_driver_init(struct work_struct *work)
|
|
{
|
|
brcmf_debugfs_init();
|
|
|
|
#ifdef CONFIG_BRCMFMAC_SDIO
|
|
brcmf_sdio_init();
|
|
#endif
|
|
#ifdef CONFIG_BRCMFMAC_USB
|
|
brcmf_usb_init();
|
|
#endif
|
|
}
|
|
static DECLARE_WORK(brcmf_driver_work, brcmf_driver_init);
|
|
|
|
static int __init brcmfmac_module_init(void)
|
|
{
|
|
if (!schedule_work(&brcmf_driver_work))
|
|
return -EBUSY;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __exit brcmfmac_module_exit(void)
|
|
{
|
|
cancel_work_sync(&brcmf_driver_work);
|
|
|
|
#ifdef CONFIG_BRCMFMAC_SDIO
|
|
brcmf_sdio_exit();
|
|
#endif
|
|
#ifdef CONFIG_BRCMFMAC_USB
|
|
brcmf_usb_exit();
|
|
#endif
|
|
brcmf_debugfs_exit();
|
|
}
|
|
|
|
module_init(brcmfmac_module_init);
|
|
module_exit(brcmfmac_module_exit);
|