Tony Lindgren a54879a008 ARM: dts: Fix USB dts configuration for dm816x ... Commit 7800064ba5 ("ARM: dts: Add basic dm816x device tree configuration") added basic devices for dm816x, but I was not able to test the USB completely because of an unconfigured USB phy, and I only tested it to make sure the Mentor chips are detected and clocked without a phy. After testing the USB with actual devices I noticed a few issues that should be fixed to avoid confusion: - The USB id pin on dm8168-evm is hardwired and can be changed only by software. As there are two USB-A type connectors, let's start both in host mode instead of otg. - The Mentor core is configured in such a way on dm8168-evm that it's not capable of multipoint at least on revision c board that I have. - We need ranges for the syscon to properly set up the phy as children of the SCM syscon area. - Let's not disable the second interface, the board specific dts files can do that if really needed. Most boards should just keep it enabled to ensure the device is idled properly. Note that also a phy and several musb fixes are still needed to make the USB to work properly in addition to this fix. Cc: Brian Hutchinson <b.hutchman@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>		2015-02-24 08:48:52 -08:00
..
bootp	ARM: 8153/1: Enable gcov support on the ARM architecture	2014-09-26 14:39:57 +01:00
compressed	Merge branches 'debug', 'fixes', 'l2c' (early part), 'misc' and 'sa1100' into for-next	2015-02-10 10:26:27 +00:00
dts	ARM: dts: Fix USB dts configuration for dm816x	2015-02-24 08:48:52 -08:00
.gitignore
install.sh
Makefile