linux/drivers/mtd/nand/gpmi-nand
Huang Shijie a5370e9ed5 mtd: gpmi: scan two nand chips
Some nand chip has two DIEs in a single chip, such as Micron MT29F32G08QAA.
Each die has its own chip select pin, so this chip acts as two nand
chips.

If we only scan one chip, we may find that we only get 2G for this chip,
but in actually, this chip's size is 4G.

So scan two chips by default.

Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06 23:33:03 -08:00
..
bch-regs.h mtd: gpmi: set the Golois Field bit for mx6q's BCH 2013-02-04 10:27:59 +02:00
gpmi-lib.c mtd: gpmi: decouple the chip select from the DMA channel 2013-11-06 23:33:01 -08:00
gpmi-nand.c mtd: gpmi: scan two nand chips 2013-11-06 23:33:03 -08:00
gpmi-nand.h mtd: gpmi: move to use generic DMA helper 2013-04-04 21:22:45 +08:00
gpmi-regs.h mtd: gpmi: decouple the chip select from the DMA channel 2013-11-06 23:33:01 -08:00
Makefile mtd: add GPMI-NAND driver in the config and Makefile 2011-09-11 15:02:18 +03:00