forked from Minki/linux
a4d68468ca
Allow the regulator framework to directly access the time it takes any given regulator to settle. This saves time and code because without it we would have to implement a dedication function to read the value from elsewhere. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
3273 lines
81 KiB
C
3273 lines
81 KiB
C
/*
|
|
* Copyright (C) ST-Ericsson SA 2010
|
|
*
|
|
* License Terms: GNU General Public License v2
|
|
*
|
|
* Authors: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
|
|
* Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson
|
|
* Daniel Willerud <daniel.willerud@stericsson.com> for ST-Ericsson
|
|
*
|
|
* AB8500 peripheral regulators
|
|
*
|
|
* AB8500 supports the following regulators:
|
|
* VAUX1/2/3, VINTCORE, VTVOUT, VUSB, VAUDIO, VAMIC1/2, VDMIC, VANA
|
|
*
|
|
* AB8505 supports the following regulators:
|
|
* VAUX1/2/3/4/5/6, VINTCORE, VADC, VUSB, VAUDIO, VAMIC1/2, VDMIC, VANA
|
|
*/
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/err.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mfd/abx500.h>
|
|
#include <linux/mfd/abx500/ab8500.h>
|
|
#include <linux/of.h>
|
|
#include <linux/regulator/of_regulator.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/regulator/ab8500.h>
|
|
#include <linux/slab.h>
|
|
|
|
/**
|
|
* struct ab8500_shared_mode - is used when mode is shared between
|
|
* two regulators.
|
|
* @shared_regulator: pointer to the other sharing regulator
|
|
* @lp_mode_req: low power mode requested by this regulator
|
|
*/
|
|
struct ab8500_shared_mode {
|
|
struct ab8500_regulator_info *shared_regulator;
|
|
bool lp_mode_req;
|
|
};
|
|
|
|
/**
|
|
* struct ab8500_regulator_info - ab8500 regulator information
|
|
* @dev: device pointer
|
|
* @desc: regulator description
|
|
* @regulator_dev: regulator device
|
|
* @shared_mode: used when mode is shared between two regulators
|
|
* @is_enabled: status of regulator (on/off)
|
|
* @load_lp_uA: maximum load in idle (low power) mode
|
|
* @update_bank: bank to control on/off
|
|
* @update_reg: register to control on/off
|
|
* @update_mask: mask to enable/disable and set mode of regulator
|
|
* @update_val: bits holding the regulator current mode
|
|
* @update_val_idle: bits to enable the regulator in idle (low power) mode
|
|
* @update_val_normal: bits to enable the regulator in normal (high power) mode
|
|
* @mode_bank: bank with location of mode register
|
|
* @mode_reg: mode register
|
|
* @mode_mask: mask for setting mode
|
|
* @mode_val_idle: mode setting for low power
|
|
* @mode_val_normal: mode setting for normal power
|
|
* @voltage_bank: bank to control regulator voltage
|
|
* @voltage_reg: register to control regulator voltage
|
|
* @voltage_mask: mask to control regulator voltage
|
|
* @voltage_shift: shift to control regulator voltage
|
|
*/
|
|
struct ab8500_regulator_info {
|
|
struct device *dev;
|
|
struct regulator_desc desc;
|
|
struct regulator_dev *regulator;
|
|
struct ab8500_shared_mode *shared_mode;
|
|
bool is_enabled;
|
|
int load_lp_uA;
|
|
u8 update_bank;
|
|
u8 update_reg;
|
|
u8 update_mask;
|
|
u8 update_val;
|
|
u8 update_val_idle;
|
|
u8 update_val_normal;
|
|
u8 mode_bank;
|
|
u8 mode_reg;
|
|
u8 mode_mask;
|
|
u8 mode_val_idle;
|
|
u8 mode_val_normal;
|
|
u8 voltage_bank;
|
|
u8 voltage_reg;
|
|
u8 voltage_mask;
|
|
u8 voltage_shift;
|
|
struct {
|
|
u8 voltage_limit;
|
|
u8 voltage_bank;
|
|
u8 voltage_reg;
|
|
u8 voltage_mask;
|
|
u8 voltage_shift;
|
|
} expand_register;
|
|
};
|
|
|
|
/* voltage tables for the vauxn/vintcore supplies */
|
|
static const unsigned int ldo_vauxn_voltages[] = {
|
|
1100000,
|
|
1200000,
|
|
1300000,
|
|
1400000,
|
|
1500000,
|
|
1800000,
|
|
1850000,
|
|
1900000,
|
|
2500000,
|
|
2650000,
|
|
2700000,
|
|
2750000,
|
|
2800000,
|
|
2900000,
|
|
3000000,
|
|
3300000,
|
|
};
|
|
|
|
static const unsigned int ldo_vaux3_voltages[] = {
|
|
1200000,
|
|
1500000,
|
|
1800000,
|
|
2100000,
|
|
2500000,
|
|
2750000,
|
|
2790000,
|
|
2910000,
|
|
};
|
|
|
|
static const unsigned int ldo_vaux56_voltages[] = {
|
|
1800000,
|
|
1050000,
|
|
1100000,
|
|
1200000,
|
|
1500000,
|
|
2200000,
|
|
2500000,
|
|
2790000,
|
|
};
|
|
|
|
static const unsigned int ldo_vaux3_ab8540_voltages[] = {
|
|
1200000,
|
|
1500000,
|
|
1800000,
|
|
2100000,
|
|
2500000,
|
|
2750000,
|
|
2790000,
|
|
2910000,
|
|
3050000,
|
|
};
|
|
|
|
static const unsigned int ldo_vaux56_ab8540_voltages[] = {
|
|
750000, 760000, 770000, 780000, 790000, 800000,
|
|
810000, 820000, 830000, 840000, 850000, 860000,
|
|
870000, 880000, 890000, 900000, 910000, 920000,
|
|
930000, 940000, 950000, 960000, 970000, 980000,
|
|
990000, 1000000, 1010000, 1020000, 1030000,
|
|
1040000, 1050000, 1060000, 1070000, 1080000,
|
|
1090000, 1100000, 1110000, 1120000, 1130000,
|
|
1140000, 1150000, 1160000, 1170000, 1180000,
|
|
1190000, 1200000, 1210000, 1220000, 1230000,
|
|
1240000, 1250000, 1260000, 1270000, 1280000,
|
|
1290000, 1300000, 1310000, 1320000, 1330000,
|
|
1340000, 1350000, 1360000, 1800000, 2790000,
|
|
};
|
|
|
|
static const unsigned int ldo_vintcore_voltages[] = {
|
|
1200000,
|
|
1225000,
|
|
1250000,
|
|
1275000,
|
|
1300000,
|
|
1325000,
|
|
1350000,
|
|
};
|
|
|
|
static const unsigned int ldo_sdio_voltages[] = {
|
|
1160000,
|
|
1050000,
|
|
1100000,
|
|
1500000,
|
|
1800000,
|
|
2200000,
|
|
2910000,
|
|
3050000,
|
|
};
|
|
|
|
static const unsigned int fixed_1200000_voltage[] = {
|
|
1200000,
|
|
};
|
|
|
|
static const unsigned int fixed_1800000_voltage[] = {
|
|
1800000,
|
|
};
|
|
|
|
static const unsigned int fixed_2000000_voltage[] = {
|
|
2000000,
|
|
};
|
|
|
|
static const unsigned int fixed_2050000_voltage[] = {
|
|
2050000,
|
|
};
|
|
|
|
static const unsigned int fixed_3300000_voltage[] = {
|
|
3300000,
|
|
};
|
|
|
|
static const unsigned int ldo_vana_voltages[] = {
|
|
1050000,
|
|
1075000,
|
|
1100000,
|
|
1125000,
|
|
1150000,
|
|
1175000,
|
|
1200000,
|
|
1225000,
|
|
};
|
|
|
|
static const unsigned int ldo_vaudio_voltages[] = {
|
|
2000000,
|
|
2100000,
|
|
2200000,
|
|
2300000,
|
|
2400000,
|
|
2500000,
|
|
2600000,
|
|
2600000, /* Duplicated in Vaudio and IsoUicc Control register. */
|
|
};
|
|
|
|
static const unsigned int ldo_vdmic_voltages[] = {
|
|
1800000,
|
|
1900000,
|
|
2000000,
|
|
2850000,
|
|
};
|
|
|
|
static DEFINE_MUTEX(shared_mode_mutex);
|
|
static struct ab8500_shared_mode ldo_anamic1_shared;
|
|
static struct ab8500_shared_mode ldo_anamic2_shared;
|
|
static struct ab8500_shared_mode ab8540_ldo_anamic1_shared;
|
|
static struct ab8500_shared_mode ab8540_ldo_anamic2_shared;
|
|
|
|
static int ab8500_regulator_enable(struct regulator_dev *rdev)
|
|
{
|
|
int ret;
|
|
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
|
|
|
|
if (info == NULL) {
|
|
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = abx500_mask_and_set_register_interruptible(info->dev,
|
|
info->update_bank, info->update_reg,
|
|
info->update_mask, info->update_val);
|
|
if (ret < 0) {
|
|
dev_err(rdev_get_dev(rdev),
|
|
"couldn't set enable bits for regulator\n");
|
|
return ret;
|
|
}
|
|
|
|
info->is_enabled = true;
|
|
|
|
dev_vdbg(rdev_get_dev(rdev),
|
|
"%s-enable (bank, reg, mask, value): 0x%x, 0x%x, 0x%x, 0x%x\n",
|
|
info->desc.name, info->update_bank, info->update_reg,
|
|
info->update_mask, info->update_val);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ab8500_regulator_disable(struct regulator_dev *rdev)
|
|
{
|
|
int ret;
|
|
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
|
|
|
|
if (info == NULL) {
|
|
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = abx500_mask_and_set_register_interruptible(info->dev,
|
|
info->update_bank, info->update_reg,
|
|
info->update_mask, 0x0);
|
|
if (ret < 0) {
|
|
dev_err(rdev_get_dev(rdev),
|
|
"couldn't set disable bits for regulator\n");
|
|
return ret;
|
|
}
|
|
|
|
info->is_enabled = false;
|
|
|
|
dev_vdbg(rdev_get_dev(rdev),
|
|
"%s-disable (bank, reg, mask, value): 0x%x, 0x%x, 0x%x, 0x%x\n",
|
|
info->desc.name, info->update_bank, info->update_reg,
|
|
info->update_mask, 0x0);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static unsigned int ab8500_regulator_get_optimum_mode(
|
|
struct regulator_dev *rdev, int input_uV,
|
|
int output_uV, int load_uA)
|
|
{
|
|
unsigned int mode;
|
|
|
|
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
|
|
|
|
if (info == NULL) {
|
|
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (load_uA <= info->load_lp_uA)
|
|
mode = REGULATOR_MODE_IDLE;
|
|
else
|
|
mode = REGULATOR_MODE_NORMAL;
|
|
|
|
return mode;
|
|
}
|
|
|
|
static int ab8500_regulator_set_mode(struct regulator_dev *rdev,
|
|
unsigned int mode)
|
|
{
|
|
int ret = 0;
|
|
u8 bank;
|
|
u8 reg;
|
|
u8 mask;
|
|
u8 val;
|
|
bool dmr = false; /* Dedicated mode register */
|
|
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
|
|
|
|
if (info == NULL) {
|
|
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (info->shared_mode) {
|
|
/*
|
|
* Special case where mode is shared between two regulators.
|
|
*/
|
|
struct ab8500_shared_mode *sm = info->shared_mode;
|
|
mutex_lock(&shared_mode_mutex);
|
|
|
|
if (mode == REGULATOR_MODE_IDLE) {
|
|
sm->lp_mode_req = true; /* Low power mode requested */
|
|
if (!((sm->shared_regulator)->
|
|
shared_mode->lp_mode_req)) {
|
|
mutex_unlock(&shared_mode_mutex);
|
|
return 0; /* Other regulator prevent LP mode */
|
|
}
|
|
} else {
|
|
sm->lp_mode_req = false;
|
|
}
|
|
}
|
|
|
|
if (info->mode_mask) {
|
|
/* Dedicated register for handling mode */
|
|
|
|
dmr = true;
|
|
|
|
switch (mode) {
|
|
case REGULATOR_MODE_NORMAL:
|
|
val = info->mode_val_normal;
|
|
break;
|
|
case REGULATOR_MODE_IDLE:
|
|
val = info->mode_val_idle;
|
|
break;
|
|
default:
|
|
if (info->shared_mode)
|
|
mutex_unlock(&shared_mode_mutex);
|
|
return -EINVAL;
|
|
}
|
|
|
|
bank = info->mode_bank;
|
|
reg = info->mode_reg;
|
|
mask = info->mode_mask;
|
|
} else {
|
|
/* Mode register same as enable register */
|
|
|
|
switch (mode) {
|
|
case REGULATOR_MODE_NORMAL:
|
|
info->update_val = info->update_val_normal;
|
|
val = info->update_val_normal;
|
|
break;
|
|
case REGULATOR_MODE_IDLE:
|
|
info->update_val = info->update_val_idle;
|
|
val = info->update_val_idle;
|
|
break;
|
|
default:
|
|
if (info->shared_mode)
|
|
mutex_unlock(&shared_mode_mutex);
|
|
return -EINVAL;
|
|
}
|
|
|
|
bank = info->update_bank;
|
|
reg = info->update_reg;
|
|
mask = info->update_mask;
|
|
}
|
|
|
|
if (info->is_enabled || dmr) {
|
|
ret = abx500_mask_and_set_register_interruptible(info->dev,
|
|
bank, reg, mask, val);
|
|
if (ret < 0)
|
|
dev_err(rdev_get_dev(rdev),
|
|
"couldn't set regulator mode\n");
|
|
|
|
dev_vdbg(rdev_get_dev(rdev),
|
|
"%s-set_mode (bank, reg, mask, value): "
|
|
"0x%x, 0x%x, 0x%x, 0x%x\n",
|
|
info->desc.name, bank, reg,
|
|
mask, val);
|
|
}
|
|
|
|
if (info->shared_mode)
|
|
mutex_unlock(&shared_mode_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static unsigned int ab8500_regulator_get_mode(struct regulator_dev *rdev)
|
|
{
|
|
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
|
|
int ret;
|
|
u8 val;
|
|
u8 val_normal;
|
|
u8 val_idle;
|
|
|
|
if (info == NULL) {
|
|
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Need special handling for shared mode */
|
|
if (info->shared_mode) {
|
|
if (info->shared_mode->lp_mode_req)
|
|
return REGULATOR_MODE_IDLE;
|
|
else
|
|
return REGULATOR_MODE_NORMAL;
|
|
}
|
|
|
|
if (info->mode_mask) {
|
|
/* Dedicated register for handling mode */
|
|
ret = abx500_get_register_interruptible(info->dev,
|
|
info->mode_bank, info->mode_reg, &val);
|
|
val = val & info->mode_mask;
|
|
|
|
val_normal = info->mode_val_normal;
|
|
val_idle = info->mode_val_idle;
|
|
} else {
|
|
/* Mode register same as enable register */
|
|
val = info->update_val;
|
|
val_normal = info->update_val_normal;
|
|
val_idle = info->update_val_idle;
|
|
}
|
|
|
|
if (val == val_normal)
|
|
ret = REGULATOR_MODE_NORMAL;
|
|
else if (val == val_idle)
|
|
ret = REGULATOR_MODE_IDLE;
|
|
else
|
|
ret = -EINVAL;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ab8500_regulator_is_enabled(struct regulator_dev *rdev)
|
|
{
|
|
int ret;
|
|
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
|
|
u8 regval;
|
|
|
|
if (info == NULL) {
|
|
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = abx500_get_register_interruptible(info->dev,
|
|
info->update_bank, info->update_reg, ®val);
|
|
if (ret < 0) {
|
|
dev_err(rdev_get_dev(rdev),
|
|
"couldn't read 0x%x register\n", info->update_reg);
|
|
return ret;
|
|
}
|
|
|
|
dev_vdbg(rdev_get_dev(rdev),
|
|
"%s-is_enabled (bank, reg, mask, value): 0x%x, 0x%x, 0x%x,"
|
|
" 0x%x\n",
|
|
info->desc.name, info->update_bank, info->update_reg,
|
|
info->update_mask, regval);
|
|
|
|
if (regval & info->update_mask)
|
|
info->is_enabled = true;
|
|
else
|
|
info->is_enabled = false;
|
|
|
|
return info->is_enabled;
|
|
}
|
|
|
|
static int ab8500_regulator_get_voltage_sel(struct regulator_dev *rdev)
|
|
{
|
|
int ret, val;
|
|
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
|
|
u8 regval;
|
|
|
|
if (info == NULL) {
|
|
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = abx500_get_register_interruptible(info->dev,
|
|
info->voltage_bank, info->voltage_reg, ®val);
|
|
if (ret < 0) {
|
|
dev_err(rdev_get_dev(rdev),
|
|
"couldn't read voltage reg for regulator\n");
|
|
return ret;
|
|
}
|
|
|
|
dev_vdbg(rdev_get_dev(rdev),
|
|
"%s-get_voltage (bank, reg, mask, shift, value): "
|
|
"0x%x, 0x%x, 0x%x, 0x%x, 0x%x\n",
|
|
info->desc.name, info->voltage_bank,
|
|
info->voltage_reg, info->voltage_mask,
|
|
info->voltage_shift, regval);
|
|
|
|
val = regval & info->voltage_mask;
|
|
return val >> info->voltage_shift;
|
|
}
|
|
|
|
static int ab8540_aux3_regulator_get_voltage_sel(struct regulator_dev *rdev)
|
|
{
|
|
int ret, val;
|
|
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
|
|
u8 regval, regval_expand;
|
|
|
|
if (info == NULL) {
|
|
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = abx500_get_register_interruptible(info->dev,
|
|
info->voltage_bank, info->voltage_reg, ®val);
|
|
|
|
if (ret < 0) {
|
|
dev_err(rdev_get_dev(rdev),
|
|
"couldn't read voltage reg for regulator\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = abx500_get_register_interruptible(info->dev,
|
|
info->expand_register.voltage_bank,
|
|
info->expand_register.voltage_reg, ®val_expand);
|
|
|
|
if (ret < 0) {
|
|
dev_err(rdev_get_dev(rdev),
|
|
"couldn't read voltage reg for regulator\n");
|
|
return ret;
|
|
}
|
|
|
|
dev_vdbg(rdev_get_dev(rdev),
|
|
"%s-get_voltage (bank, reg, mask, value): 0x%x, 0x%x, 0x%x,"
|
|
" 0x%x\n",
|
|
info->desc.name, info->voltage_bank, info->voltage_reg,
|
|
info->voltage_mask, regval);
|
|
dev_vdbg(rdev_get_dev(rdev),
|
|
"%s-get_voltage expand (bank, reg, mask, value): 0x%x, 0x%x, 0x%x,"
|
|
" 0x%x\n",
|
|
info->desc.name, info->expand_register.voltage_bank,
|
|
info->expand_register.voltage_reg,
|
|
info->expand_register.voltage_mask, regval_expand);
|
|
|
|
if (regval_expand&(info->expand_register.voltage_mask))
|
|
/* Vaux3 has a different layout */
|
|
val = info->expand_register.voltage_limit;
|
|
else
|
|
val = (regval & info->voltage_mask) >> info->voltage_shift;
|
|
|
|
return val;
|
|
}
|
|
|
|
static int ab8500_regulator_set_voltage_sel(struct regulator_dev *rdev,
|
|
unsigned selector)
|
|
{
|
|
int ret;
|
|
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
|
|
u8 regval;
|
|
|
|
if (info == NULL) {
|
|
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* set the registers for the request */
|
|
regval = (u8)selector << info->voltage_shift;
|
|
ret = abx500_mask_and_set_register_interruptible(info->dev,
|
|
info->voltage_bank, info->voltage_reg,
|
|
info->voltage_mask, regval);
|
|
if (ret < 0)
|
|
dev_err(rdev_get_dev(rdev),
|
|
"couldn't set voltage reg for regulator\n");
|
|
|
|
dev_vdbg(rdev_get_dev(rdev),
|
|
"%s-set_voltage (bank, reg, mask, value): 0x%x, 0x%x, 0x%x,"
|
|
" 0x%x\n",
|
|
info->desc.name, info->voltage_bank, info->voltage_reg,
|
|
info->voltage_mask, regval);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ab8540_aux3_regulator_set_voltage_sel(struct regulator_dev *rdev,
|
|
unsigned selector)
|
|
{
|
|
int ret;
|
|
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
|
|
u8 regval;
|
|
|
|
if (info == NULL) {
|
|
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (selector >= info->expand_register.voltage_limit) {
|
|
/* Vaux3 bit4 has different layout */
|
|
regval = (u8)selector << info->expand_register.voltage_shift;
|
|
ret = abx500_mask_and_set_register_interruptible(info->dev,
|
|
info->expand_register.voltage_bank,
|
|
info->expand_register.voltage_reg,
|
|
info->expand_register.voltage_mask,
|
|
regval);
|
|
} else {
|
|
/* set the registers for the request */
|
|
regval = (u8)selector << info->voltage_shift;
|
|
ret = abx500_mask_and_set_register_interruptible(info->dev,
|
|
info->voltage_bank, info->voltage_reg,
|
|
info->voltage_mask, regval);
|
|
}
|
|
if (ret < 0)
|
|
dev_err(rdev_get_dev(rdev),
|
|
"couldn't set voltage reg for regulator\n");
|
|
|
|
dev_vdbg(rdev_get_dev(rdev),
|
|
"%s-set_voltage (bank, reg, mask, value): 0x%x, 0x%x, 0x%x,"
|
|
" 0x%x\n",
|
|
info->desc.name, info->voltage_bank, info->voltage_reg,
|
|
info->voltage_mask, regval);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ab8500_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
|
|
unsigned int old_sel,
|
|
unsigned int new_sel)
|
|
{
|
|
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
|
|
|
|
return info->delay;
|
|
}
|
|
|
|
static struct regulator_ops ab8500_regulator_volt_mode_ops = {
|
|
.enable = ab8500_regulator_enable,
|
|
.disable = ab8500_regulator_disable,
|
|
.is_enabled = ab8500_regulator_is_enabled,
|
|
.get_optimum_mode = ab8500_regulator_get_optimum_mode,
|
|
.set_mode = ab8500_regulator_set_mode,
|
|
.get_mode = ab8500_regulator_get_mode,
|
|
.get_voltage_sel = ab8500_regulator_get_voltage_sel,
|
|
.set_voltage_sel = ab8500_regulator_set_voltage_sel,
|
|
.list_voltage = regulator_list_voltage_table,
|
|
};
|
|
|
|
static struct regulator_ops ab8540_aux3_regulator_volt_mode_ops = {
|
|
.enable = ab8500_regulator_enable,
|
|
.disable = ab8500_regulator_disable,
|
|
.get_optimum_mode = ab8500_regulator_get_optimum_mode,
|
|
.set_mode = ab8500_regulator_set_mode,
|
|
.get_mode = ab8500_regulator_get_mode,
|
|
.is_enabled = ab8500_regulator_is_enabled,
|
|
.get_voltage_sel = ab8540_aux3_regulator_get_voltage_sel,
|
|
.set_voltage_sel = ab8540_aux3_regulator_set_voltage_sel,
|
|
.list_voltage = regulator_list_voltage_table,
|
|
.set_voltage_time_sel = ab8500_regulator_set_voltage_time_sel,
|
|
};
|
|
|
|
static struct regulator_ops ab8500_regulator_volt_ops = {
|
|
.enable = ab8500_regulator_enable,
|
|
.disable = ab8500_regulator_disable,
|
|
.is_enabled = ab8500_regulator_is_enabled,
|
|
.get_voltage_sel = ab8500_regulator_get_voltage_sel,
|
|
.set_voltage_sel = ab8500_regulator_set_voltage_sel,
|
|
.list_voltage = regulator_list_voltage_table,
|
|
.set_voltage_time_sel = ab8500_regulator_set_voltage_time_sel,
|
|
};
|
|
|
|
static struct regulator_ops ab8500_regulator_mode_ops = {
|
|
.enable = ab8500_regulator_enable,
|
|
.disable = ab8500_regulator_disable,
|
|
.is_enabled = ab8500_regulator_is_enabled,
|
|
.get_optimum_mode = ab8500_regulator_get_optimum_mode,
|
|
.set_mode = ab8500_regulator_set_mode,
|
|
.get_mode = ab8500_regulator_get_mode,
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
};
|
|
|
|
static struct regulator_ops ab8500_regulator_ops = {
|
|
.enable = ab8500_regulator_enable,
|
|
.disable = ab8500_regulator_disable,
|
|
.is_enabled = ab8500_regulator_is_enabled,
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
};
|
|
|
|
static struct regulator_ops ab8500_regulator_anamic_mode_ops = {
|
|
.enable = ab8500_regulator_enable,
|
|
.disable = ab8500_regulator_disable,
|
|
.is_enabled = ab8500_regulator_is_enabled,
|
|
.set_mode = ab8500_regulator_set_mode,
|
|
.get_mode = ab8500_regulator_get_mode,
|
|
.list_voltage = regulator_list_voltage_table,
|
|
};
|
|
|
|
/* AB8500 regulator information */
|
|
static struct ab8500_regulator_info
|
|
ab8500_regulator_info[AB8500_NUM_REGULATORS] = {
|
|
/*
|
|
* Variable Voltage Regulators
|
|
* name, min mV, max mV,
|
|
* update bank, reg, mask, enable val
|
|
* volt bank, reg, mask
|
|
*/
|
|
[AB8500_LDO_AUX1] = {
|
|
.desc = {
|
|
.name = "LDO-AUX1",
|
|
.ops = &ab8500_regulator_volt_mode_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8500_LDO_AUX1,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
|
|
.volt_table = ldo_vauxn_voltages,
|
|
.enable_time = 200,
|
|
},
|
|
.load_lp_uA = 5000,
|
|
.update_bank = 0x04,
|
|
.update_reg = 0x09,
|
|
.update_mask = 0x03,
|
|
.update_val = 0x01,
|
|
.update_val_idle = 0x03,
|
|
.update_val_normal = 0x01,
|
|
.voltage_bank = 0x04,
|
|
.voltage_reg = 0x1f,
|
|
.voltage_mask = 0x0f,
|
|
},
|
|
[AB8500_LDO_AUX2] = {
|
|
.desc = {
|
|
.name = "LDO-AUX2",
|
|
.ops = &ab8500_regulator_volt_mode_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8500_LDO_AUX2,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
|
|
.volt_table = ldo_vauxn_voltages,
|
|
.enable_time = 200,
|
|
},
|
|
.load_lp_uA = 5000,
|
|
.update_bank = 0x04,
|
|
.update_reg = 0x09,
|
|
.update_mask = 0x0c,
|
|
.update_val = 0x04,
|
|
.update_val_idle = 0x0c,
|
|
.update_val_normal = 0x04,
|
|
.voltage_bank = 0x04,
|
|
.voltage_reg = 0x20,
|
|
.voltage_mask = 0x0f,
|
|
},
|
|
[AB8500_LDO_AUX3] = {
|
|
.desc = {
|
|
.name = "LDO-AUX3",
|
|
.ops = &ab8500_regulator_volt_mode_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8500_LDO_AUX3,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = ARRAY_SIZE(ldo_vaux3_voltages),
|
|
.volt_table = ldo_vaux3_voltages,
|
|
.enable_time = 450,
|
|
},
|
|
.load_lp_uA = 5000,
|
|
.update_bank = 0x04,
|
|
.update_reg = 0x0a,
|
|
.update_mask = 0x03,
|
|
.update_val = 0x01,
|
|
.update_val_idle = 0x03,
|
|
.update_val_normal = 0x01,
|
|
.voltage_bank = 0x04,
|
|
.voltage_reg = 0x21,
|
|
.voltage_mask = 0x07,
|
|
},
|
|
[AB8500_LDO_INTCORE] = {
|
|
.desc = {
|
|
.name = "LDO-INTCORE",
|
|
.ops = &ab8500_regulator_volt_mode_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8500_LDO_INTCORE,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = ARRAY_SIZE(ldo_vintcore_voltages),
|
|
.volt_table = ldo_vintcore_voltages,
|
|
.enable_time = 750,
|
|
},
|
|
.load_lp_uA = 5000,
|
|
.update_bank = 0x03,
|
|
.update_reg = 0x80,
|
|
.update_mask = 0x44,
|
|
.update_val = 0x44,
|
|
.update_val_idle = 0x44,
|
|
.update_val_normal = 0x04,
|
|
.voltage_bank = 0x03,
|
|
.voltage_reg = 0x80,
|
|
.voltage_mask = 0x38,
|
|
.voltage_shift = 3,
|
|
},
|
|
|
|
/*
|
|
* Fixed Voltage Regulators
|
|
* name, fixed mV,
|
|
* update bank, reg, mask, enable val
|
|
*/
|
|
[AB8500_LDO_TVOUT] = {
|
|
.desc = {
|
|
.name = "LDO-TVOUT",
|
|
.ops = &ab8500_regulator_mode_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8500_LDO_TVOUT,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = 1,
|
|
.volt_table = fixed_2000000_voltage,
|
|
.enable_time = 500,
|
|
},
|
|
.load_lp_uA = 1000,
|
|
.update_bank = 0x03,
|
|
.update_reg = 0x80,
|
|
.update_mask = 0x82,
|
|
.update_val = 0x02,
|
|
.update_val_idle = 0x82,
|
|
.update_val_normal = 0x02,
|
|
},
|
|
[AB8500_LDO_AUDIO] = {
|
|
.desc = {
|
|
.name = "LDO-AUDIO",
|
|
.ops = &ab8500_regulator_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8500_LDO_AUDIO,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = 1,
|
|
.enable_time = 140,
|
|
.volt_table = fixed_2000000_voltage,
|
|
},
|
|
.update_bank = 0x03,
|
|
.update_reg = 0x83,
|
|
.update_mask = 0x02,
|
|
.update_val = 0x02,
|
|
},
|
|
[AB8500_LDO_ANAMIC1] = {
|
|
.desc = {
|
|
.name = "LDO-ANAMIC1",
|
|
.ops = &ab8500_regulator_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8500_LDO_ANAMIC1,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = 1,
|
|
.enable_time = 500,
|
|
.volt_table = fixed_2050000_voltage,
|
|
},
|
|
.update_bank = 0x03,
|
|
.update_reg = 0x83,
|
|
.update_mask = 0x08,
|
|
.update_val = 0x08,
|
|
},
|
|
[AB8500_LDO_ANAMIC2] = {
|
|
.desc = {
|
|
.name = "LDO-ANAMIC2",
|
|
.ops = &ab8500_regulator_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8500_LDO_ANAMIC2,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = 1,
|
|
.enable_time = 500,
|
|
.volt_table = fixed_2050000_voltage,
|
|
},
|
|
.update_bank = 0x03,
|
|
.update_reg = 0x83,
|
|
.update_mask = 0x10,
|
|
.update_val = 0x10,
|
|
},
|
|
[AB8500_LDO_DMIC] = {
|
|
.desc = {
|
|
.name = "LDO-DMIC",
|
|
.ops = &ab8500_regulator_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8500_LDO_DMIC,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = 1,
|
|
.enable_time = 420,
|
|
.volt_table = fixed_1800000_voltage,
|
|
},
|
|
.update_bank = 0x03,
|
|
.update_reg = 0x83,
|
|
.update_mask = 0x04,
|
|
.update_val = 0x04,
|
|
},
|
|
|
|
/*
|
|
* Regulators with fixed voltage and normal/idle modes
|
|
*/
|
|
[AB8500_LDO_ANA] = {
|
|
.desc = {
|
|
.name = "LDO-ANA",
|
|
.ops = &ab8500_regulator_mode_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8500_LDO_ANA,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = 1,
|
|
.enable_time = 140,
|
|
.volt_table = fixed_1200000_voltage,
|
|
},
|
|
.load_lp_uA = 1000,
|
|
.update_bank = 0x04,
|
|
.update_reg = 0x06,
|
|
.update_mask = 0x0c,
|
|
.update_val = 0x04,
|
|
.update_val_idle = 0x0c,
|
|
.update_val_normal = 0x04,
|
|
},
|
|
};
|
|
|
|
/* AB8505 regulator information */
|
|
static struct ab8500_regulator_info
|
|
ab8505_regulator_info[AB8505_NUM_REGULATORS] = {
|
|
/*
|
|
* Variable Voltage Regulators
|
|
* name, min mV, max mV,
|
|
* update bank, reg, mask, enable val
|
|
* volt bank, reg, mask, table, table length
|
|
*/
|
|
[AB8505_LDO_AUX1] = {
|
|
.desc = {
|
|
.name = "LDO-AUX1",
|
|
.ops = &ab8500_regulator_volt_mode_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8505_LDO_AUX1,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
|
|
.volt_table = ldo_vauxn_voltages,
|
|
},
|
|
.load_lp_uA = 5000,
|
|
.update_bank = 0x04,
|
|
.update_reg = 0x09,
|
|
.update_mask = 0x03,
|
|
.update_val = 0x01,
|
|
.update_val_idle = 0x03,
|
|
.update_val_normal = 0x01,
|
|
.voltage_bank = 0x04,
|
|
.voltage_reg = 0x1f,
|
|
.voltage_mask = 0x0f,
|
|
},
|
|
[AB8505_LDO_AUX2] = {
|
|
.desc = {
|
|
.name = "LDO-AUX2",
|
|
.ops = &ab8500_regulator_volt_mode_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8505_LDO_AUX2,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
|
|
.volt_table = ldo_vauxn_voltages,
|
|
},
|
|
.load_lp_uA = 5000,
|
|
.update_bank = 0x04,
|
|
.update_reg = 0x09,
|
|
.update_mask = 0x0c,
|
|
.update_val = 0x04,
|
|
.update_val_idle = 0x0c,
|
|
.update_val_normal = 0x04,
|
|
.voltage_bank = 0x04,
|
|
.voltage_reg = 0x20,
|
|
.voltage_mask = 0x0f,
|
|
},
|
|
[AB8505_LDO_AUX3] = {
|
|
.desc = {
|
|
.name = "LDO-AUX3",
|
|
.ops = &ab8500_regulator_volt_mode_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8505_LDO_AUX3,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = ARRAY_SIZE(ldo_vaux3_voltages),
|
|
.volt_table = ldo_vaux3_voltages,
|
|
},
|
|
.load_lp_uA = 5000,
|
|
.update_bank = 0x04,
|
|
.update_reg = 0x0a,
|
|
.update_mask = 0x03,
|
|
.update_val = 0x01,
|
|
.update_val_idle = 0x03,
|
|
.update_val_normal = 0x01,
|
|
.voltage_bank = 0x04,
|
|
.voltage_reg = 0x21,
|
|
.voltage_mask = 0x07,
|
|
},
|
|
[AB8505_LDO_AUX4] = {
|
|
.desc = {
|
|
.name = "LDO-AUX4",
|
|
.ops = &ab8500_regulator_volt_mode_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8505_LDO_AUX4,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
|
|
.volt_table = ldo_vauxn_voltages,
|
|
},
|
|
.load_lp_uA = 5000,
|
|
/* values for Vaux4Regu register */
|
|
.update_bank = 0x04,
|
|
.update_reg = 0x2e,
|
|
.update_mask = 0x03,
|
|
.update_val = 0x01,
|
|
.update_val_idle = 0x03,
|
|
.update_val_normal = 0x01,
|
|
/* values for Vaux4SEL register */
|
|
.voltage_bank = 0x04,
|
|
.voltage_reg = 0x2f,
|
|
.voltage_mask = 0x0f,
|
|
},
|
|
[AB8505_LDO_AUX5] = {
|
|
.desc = {
|
|
.name = "LDO-AUX5",
|
|
.ops = &ab8500_regulator_volt_mode_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8505_LDO_AUX5,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = ARRAY_SIZE(ldo_vaux56_voltages),
|
|
.volt_table = ldo_vaux56_voltages,
|
|
},
|
|
.load_lp_uA = 2000,
|
|
/* values for CtrlVaux5 register */
|
|
.update_bank = 0x01,
|
|
.update_reg = 0x55,
|
|
.update_mask = 0x18,
|
|
.update_val = 0x10,
|
|
.update_val_idle = 0x18,
|
|
.update_val_normal = 0x10,
|
|
.voltage_bank = 0x01,
|
|
.voltage_reg = 0x55,
|
|
.voltage_mask = 0x07,
|
|
},
|
|
[AB8505_LDO_AUX6] = {
|
|
.desc = {
|
|
.name = "LDO-AUX6",
|
|
.ops = &ab8500_regulator_volt_mode_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8505_LDO_AUX6,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = ARRAY_SIZE(ldo_vaux56_voltages),
|
|
.volt_table = ldo_vaux56_voltages,
|
|
},
|
|
.load_lp_uA = 2000,
|
|
/* values for CtrlVaux6 register */
|
|
.update_bank = 0x01,
|
|
.update_reg = 0x56,
|
|
.update_mask = 0x18,
|
|
.update_val = 0x10,
|
|
.update_val_idle = 0x18,
|
|
.update_val_normal = 0x10,
|
|
.voltage_bank = 0x01,
|
|
.voltage_reg = 0x56,
|
|
.voltage_mask = 0x07,
|
|
},
|
|
[AB8505_LDO_INTCORE] = {
|
|
.desc = {
|
|
.name = "LDO-INTCORE",
|
|
.ops = &ab8500_regulator_volt_mode_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8505_LDO_INTCORE,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = ARRAY_SIZE(ldo_vintcore_voltages),
|
|
.volt_table = ldo_vintcore_voltages,
|
|
},
|
|
.load_lp_uA = 5000,
|
|
.update_bank = 0x03,
|
|
.update_reg = 0x80,
|
|
.update_mask = 0x44,
|
|
.update_val = 0x04,
|
|
.update_val_idle = 0x44,
|
|
.update_val_normal = 0x04,
|
|
.voltage_bank = 0x03,
|
|
.voltage_reg = 0x80,
|
|
.voltage_mask = 0x38,
|
|
.voltage_shift = 3,
|
|
},
|
|
|
|
/*
|
|
* Fixed Voltage Regulators
|
|
* name, fixed mV,
|
|
* update bank, reg, mask, enable val
|
|
*/
|
|
[AB8505_LDO_ADC] = {
|
|
.desc = {
|
|
.name = "LDO-ADC",
|
|
.ops = &ab8500_regulator_mode_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8505_LDO_ADC,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = 1,
|
|
.volt_table = fixed_2000000_voltage,
|
|
.enable_time = 10000,
|
|
},
|
|
.delay = 10000,
|
|
.load_lp_uA = 1000,
|
|
.update_bank = 0x03,
|
|
.update_reg = 0x80,
|
|
.update_mask = 0x82,
|
|
.update_val = 0x02,
|
|
.update_val_idle = 0x82,
|
|
.update_val_normal = 0x02,
|
|
},
|
|
[AB8505_LDO_USB] = {
|
|
.desc = {
|
|
.name = "LDO-USB",
|
|
.ops = &ab8500_regulator_mode_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8505_LDO_USB,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = 1,
|
|
.volt_table = fixed_3300000_voltage,
|
|
},
|
|
.update_bank = 0x03,
|
|
.update_reg = 0x82,
|
|
.update_mask = 0x03,
|
|
.update_val = 0x01,
|
|
.update_val_idle = 0x03,
|
|
.update_val_normal = 0x01,
|
|
},
|
|
[AB8505_LDO_AUDIO] = {
|
|
.desc = {
|
|
.name = "LDO-AUDIO",
|
|
.ops = &ab8500_regulator_volt_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8505_LDO_AUDIO,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = ARRAY_SIZE(ldo_vaudio_voltages),
|
|
.volt_table = ldo_vaudio_voltages,
|
|
},
|
|
.update_bank = 0x03,
|
|
.update_reg = 0x83,
|
|
.update_mask = 0x02,
|
|
.update_val = 0x02,
|
|
.voltage_bank = 0x01,
|
|
.voltage_reg = 0x57,
|
|
.voltage_mask = 0x7,
|
|
.voltage_shift = 4,
|
|
.voltages = ldo_vaudio_voltages,
|
|
.voltages_len = ARRAY_SIZE(ldo_vaudio_voltages),
|
|
},
|
|
[AB8505_LDO_ANAMIC1] = {
|
|
.desc = {
|
|
.name = "LDO-ANAMIC1",
|
|
.ops = &ab8500_regulator_anamic_mode_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8505_LDO_ANAMIC1,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = 1,
|
|
.volt_table = fixed_2050000_voltage,
|
|
},
|
|
.shared_mode = &ldo_anamic1_shared,
|
|
.update_bank = 0x03,
|
|
.update_reg = 0x83,
|
|
.update_mask = 0x08,
|
|
.update_val = 0x08,
|
|
.mode_bank = 0x01,
|
|
.mode_reg = 0x54,
|
|
.mode_mask = 0x04,
|
|
.mode_val_idle = 0x04,
|
|
.mode_val_normal = 0x00,
|
|
},
|
|
[AB8505_LDO_ANAMIC2] = {
|
|
.desc = {
|
|
.name = "LDO-ANAMIC2",
|
|
.ops = &ab8500_regulator_anamic_mode_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8505_LDO_ANAMIC2,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = 1,
|
|
.volt_table = fixed_2050000_voltage,
|
|
},
|
|
.shared_mode = &ldo_anamic2_shared,
|
|
.update_bank = 0x03,
|
|
.update_reg = 0x83,
|
|
.update_mask = 0x10,
|
|
.update_val = 0x10,
|
|
.mode_bank = 0x01,
|
|
.mode_reg = 0x54,
|
|
.mode_mask = 0x04,
|
|
.mode_val_idle = 0x04,
|
|
.mode_val_normal = 0x00,
|
|
},
|
|
[AB8505_LDO_AUX8] = {
|
|
.desc = {
|
|
.name = "LDO-AUX8",
|
|
.ops = &ab8500_regulator_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8505_LDO_AUX8,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = 1,
|
|
.volt_table = fixed_1800000_voltage,
|
|
},
|
|
.update_bank = 0x03,
|
|
.update_reg = 0x83,
|
|
.update_mask = 0x04,
|
|
.update_val = 0x04,
|
|
},
|
|
/*
|
|
* Regulators with fixed voltage and normal/idle modes
|
|
*/
|
|
[AB8505_LDO_ANA] = {
|
|
.desc = {
|
|
.name = "LDO-ANA",
|
|
.ops = &ab8500_regulator_volt_mode_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8505_LDO_ANA,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = ARRAY_SIZE(ldo_vana_voltages),
|
|
.volt_table = ldo_vana_voltages,
|
|
},
|
|
.load_lp_uA = 1000,
|
|
.update_bank = 0x04,
|
|
.update_reg = 0x06,
|
|
.update_mask = 0x0c,
|
|
.update_val = 0x04,
|
|
.update_val_idle = 0x0c,
|
|
.update_val_normal = 0x04,
|
|
.voltage_bank = 0x04,
|
|
.voltage_reg = 0x29,
|
|
.voltage_mask = 0x7,
|
|
.voltages = ldo_vana_voltages,
|
|
.voltages_len = ARRAY_SIZE(ldo_vana_voltages),
|
|
},
|
|
};
|
|
|
|
/* AB9540 regulator information */
|
|
static struct ab8500_regulator_info
|
|
ab9540_regulator_info[AB9540_NUM_REGULATORS] = {
|
|
/*
|
|
* Variable Voltage Regulators
|
|
* name, min mV, max mV,
|
|
* update bank, reg, mask, enable val
|
|
* volt bank, reg, mask, table, table length
|
|
*/
|
|
[AB9540_LDO_AUX1] = {
|
|
.desc = {
|
|
.name = "LDO-AUX1",
|
|
.ops = &ab8500_regulator_volt_mode_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB9540_LDO_AUX1,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
|
|
.volt_table = ldo_vauxn_voltages,
|
|
},
|
|
.load_lp_uA = 5000,
|
|
.update_bank = 0x04,
|
|
.update_reg = 0x09,
|
|
.update_mask = 0x03,
|
|
.update_val = 0x01,
|
|
.update_val_idle = 0x03,
|
|
.update_val_normal = 0x01,
|
|
.voltage_bank = 0x04,
|
|
.voltage_reg = 0x1f,
|
|
.voltage_mask = 0x0f,
|
|
},
|
|
[AB9540_LDO_AUX2] = {
|
|
.desc = {
|
|
.name = "LDO-AUX2",
|
|
.ops = &ab8500_regulator_volt_mode_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB9540_LDO_AUX2,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
|
|
.volt_table = ldo_vauxn_voltages,
|
|
},
|
|
.load_lp_uA = 5000,
|
|
.update_bank = 0x04,
|
|
.update_reg = 0x09,
|
|
.update_mask = 0x0c,
|
|
.update_val = 0x04,
|
|
.update_val_idle = 0x0c,
|
|
.update_val_normal = 0x04,
|
|
.voltage_bank = 0x04,
|
|
.voltage_reg = 0x20,
|
|
.voltage_mask = 0x0f,
|
|
},
|
|
[AB9540_LDO_AUX3] = {
|
|
.desc = {
|
|
.name = "LDO-AUX3",
|
|
.ops = &ab8500_regulator_volt_mode_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB9540_LDO_AUX3,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = ARRAY_SIZE(ldo_vaux3_voltages),
|
|
.volt_table = ldo_vaux3_voltages,
|
|
},
|
|
.load_lp_uA = 5000,
|
|
.update_bank = 0x04,
|
|
.update_reg = 0x0a,
|
|
.update_mask = 0x03,
|
|
.update_val = 0x01,
|
|
.update_val_idle = 0x03,
|
|
.update_val_normal = 0x01,
|
|
.voltage_bank = 0x04,
|
|
.voltage_reg = 0x21,
|
|
.voltage_mask = 0x07,
|
|
},
|
|
[AB9540_LDO_AUX4] = {
|
|
.desc = {
|
|
.name = "LDO-AUX4",
|
|
.ops = &ab8500_regulator_volt_mode_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB9540_LDO_AUX4,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
|
|
.volt_table = ldo_vauxn_voltages,
|
|
},
|
|
.load_lp_uA = 5000,
|
|
/* values for Vaux4Regu register */
|
|
.update_bank = 0x04,
|
|
.update_reg = 0x2e,
|
|
.update_mask = 0x03,
|
|
.update_val = 0x01,
|
|
.update_val_idle = 0x03,
|
|
.update_val_normal = 0x01,
|
|
/* values for Vaux4SEL register */
|
|
.voltage_bank = 0x04,
|
|
.voltage_reg = 0x2f,
|
|
.voltage_mask = 0x0f,
|
|
},
|
|
[AB9540_LDO_INTCORE] = {
|
|
.desc = {
|
|
.name = "LDO-INTCORE",
|
|
.ops = &ab8500_regulator_volt_mode_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB9540_LDO_INTCORE,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = ARRAY_SIZE(ldo_vintcore_voltages),
|
|
.volt_table = ldo_vintcore_voltages,
|
|
},
|
|
.load_lp_uA = 5000,
|
|
.update_bank = 0x03,
|
|
.update_reg = 0x80,
|
|
.update_mask = 0x44,
|
|
.update_val = 0x44,
|
|
.update_val_idle = 0x44,
|
|
.update_val_normal = 0x04,
|
|
.voltage_bank = 0x03,
|
|
.voltage_reg = 0x80,
|
|
.voltage_mask = 0x38,
|
|
.voltage_shift = 3,
|
|
},
|
|
|
|
/*
|
|
* Fixed Voltage Regulators
|
|
* name, fixed mV,
|
|
* update bank, reg, mask, enable val
|
|
*/
|
|
[AB9540_LDO_TVOUT] = {
|
|
.desc = {
|
|
.name = "LDO-TVOUT",
|
|
.ops = &ab8500_regulator_mode_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB9540_LDO_TVOUT,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = 1,
|
|
.volt_table = fixed_2000000_voltage,
|
|
.enable_time = 10000,
|
|
},
|
|
.delay = 10000,
|
|
.load_lp_uA = 1000,
|
|
.update_bank = 0x03,
|
|
.update_reg = 0x80,
|
|
.update_mask = 0x82,
|
|
.update_val = 0x02,
|
|
.update_val_idle = 0x82,
|
|
.update_val_normal = 0x02,
|
|
},
|
|
[AB9540_LDO_USB] = {
|
|
.desc = {
|
|
.name = "LDO-USB",
|
|
.ops = &ab8500_regulator_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB9540_LDO_USB,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = 1,
|
|
.volt_table = fixed_3300000_voltage,
|
|
},
|
|
.update_bank = 0x03,
|
|
.update_reg = 0x82,
|
|
.update_mask = 0x03,
|
|
.update_val = 0x01,
|
|
.update_val_idle = 0x03,
|
|
.update_val_normal = 0x01,
|
|
},
|
|
[AB9540_LDO_AUDIO] = {
|
|
.desc = {
|
|
.name = "LDO-AUDIO",
|
|
.ops = &ab8500_regulator_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB9540_LDO_AUDIO,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = 1,
|
|
.volt_table = fixed_2000000_voltage,
|
|
},
|
|
.update_bank = 0x03,
|
|
.update_reg = 0x83,
|
|
.update_mask = 0x02,
|
|
.update_val = 0x02,
|
|
},
|
|
[AB9540_LDO_ANAMIC1] = {
|
|
.desc = {
|
|
.name = "LDO-ANAMIC1",
|
|
.ops = &ab8500_regulator_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB9540_LDO_ANAMIC1,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = 1,
|
|
.volt_table = fixed_2050000_voltage,
|
|
},
|
|
.update_bank = 0x03,
|
|
.update_reg = 0x83,
|
|
.update_mask = 0x08,
|
|
.update_val = 0x08,
|
|
},
|
|
[AB9540_LDO_ANAMIC2] = {
|
|
.desc = {
|
|
.name = "LDO-ANAMIC2",
|
|
.ops = &ab8500_regulator_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB9540_LDO_ANAMIC2,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = 1,
|
|
.volt_table = fixed_2050000_voltage,
|
|
},
|
|
.update_bank = 0x03,
|
|
.update_reg = 0x83,
|
|
.update_mask = 0x10,
|
|
.update_val = 0x10,
|
|
},
|
|
[AB9540_LDO_DMIC] = {
|
|
.desc = {
|
|
.name = "LDO-DMIC",
|
|
.ops = &ab8500_regulator_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB9540_LDO_DMIC,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = 1,
|
|
.volt_table = fixed_1800000_voltage,
|
|
},
|
|
.update_bank = 0x03,
|
|
.update_reg = 0x83,
|
|
.update_mask = 0x04,
|
|
.update_val = 0x04,
|
|
},
|
|
|
|
/*
|
|
* Regulators with fixed voltage and normal/idle modes
|
|
*/
|
|
[AB9540_LDO_ANA] = {
|
|
.desc = {
|
|
.name = "LDO-ANA",
|
|
.ops = &ab8500_regulator_mode_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB9540_LDO_ANA,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = 1,
|
|
.volt_table = fixed_1200000_voltage,
|
|
},
|
|
.load_lp_uA = 1000,
|
|
.update_bank = 0x04,
|
|
.update_reg = 0x06,
|
|
.update_mask = 0x0c,
|
|
.update_val = 0x08,
|
|
.update_val_idle = 0x0c,
|
|
.update_val_normal = 0x08,
|
|
},
|
|
};
|
|
|
|
/* AB8540 regulator information */
|
|
static struct ab8500_regulator_info
|
|
ab8540_regulator_info[AB8540_NUM_REGULATORS] = {
|
|
/*
|
|
* Variable Voltage Regulators
|
|
* name, min mV, max mV,
|
|
* update bank, reg, mask, enable val
|
|
* volt bank, reg, mask, table, table length
|
|
*/
|
|
[AB8540_LDO_AUX1] = {
|
|
.desc = {
|
|
.name = "LDO-AUX1",
|
|
.ops = &ab8500_regulator_volt_mode_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8540_LDO_AUX1,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
|
|
.volt_table = ldo_vauxn_voltages,
|
|
},
|
|
.load_lp_uA = 5000,
|
|
.update_bank = 0x04,
|
|
.update_reg = 0x09,
|
|
.update_mask = 0x03,
|
|
.update_val = 0x01,
|
|
.update_val_idle = 0x03,
|
|
.update_val_normal = 0x01,
|
|
.voltage_bank = 0x04,
|
|
.voltage_reg = 0x1f,
|
|
.voltage_mask = 0x0f,
|
|
},
|
|
[AB8540_LDO_AUX2] = {
|
|
.desc = {
|
|
.name = "LDO-AUX2",
|
|
.ops = &ab8500_regulator_volt_mode_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8540_LDO_AUX2,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
|
|
.volt_table = ldo_vauxn_voltages,
|
|
},
|
|
.load_lp_uA = 5000,
|
|
.update_bank = 0x04,
|
|
.update_reg = 0x09,
|
|
.update_mask = 0x0c,
|
|
.update_val = 0x04,
|
|
.update_val_idle = 0x0c,
|
|
.update_val_normal = 0x04,
|
|
.voltage_bank = 0x04,
|
|
.voltage_reg = 0x20,
|
|
.voltage_mask = 0x0f,
|
|
},
|
|
[AB8540_LDO_AUX3] = {
|
|
.desc = {
|
|
.name = "LDO-AUX3",
|
|
.ops = &ab8540_aux3_regulator_volt_mode_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8540_LDO_AUX3,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = ARRAY_SIZE(ldo_vaux3_ab8540_voltages),
|
|
.volt_table = ldo_vaux3_ab8540_voltages,
|
|
},
|
|
.load_lp_uA = 5000,
|
|
.update_bank = 0x04,
|
|
.update_reg = 0x0a,
|
|
.update_mask = 0x03,
|
|
.update_val = 0x01,
|
|
.update_val_idle = 0x03,
|
|
.update_val_normal = 0x01,
|
|
.voltage_bank = 0x04,
|
|
.voltage_reg = 0x21,
|
|
.voltage_mask = 0x07,
|
|
.expand_register = {
|
|
.voltage_limit = 8,
|
|
.voltage_bank = 0x04,
|
|
.voltage_reg = 0x01,
|
|
.voltage_mask = 0x10,
|
|
.voltage_shift = 1,
|
|
}
|
|
},
|
|
[AB8540_LDO_AUX4] = {
|
|
.desc = {
|
|
.name = "LDO-AUX4",
|
|
.ops = &ab8500_regulator_volt_mode_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8540_LDO_AUX4,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
|
|
.volt_table = ldo_vauxn_voltages,
|
|
},
|
|
.load_lp_uA = 5000,
|
|
/* values for Vaux4Regu register */
|
|
.update_bank = 0x04,
|
|
.update_reg = 0x2e,
|
|
.update_mask = 0x03,
|
|
.update_val = 0x01,
|
|
.update_val_idle = 0x03,
|
|
.update_val_normal = 0x01,
|
|
/* values for Vaux4SEL register */
|
|
.voltage_bank = 0x04,
|
|
.voltage_reg = 0x2f,
|
|
.voltage_mask = 0x0f,
|
|
},
|
|
[AB8540_LDO_AUX5] = {
|
|
.desc = {
|
|
.name = "LDO-AUX5",
|
|
.ops = &ab8500_regulator_volt_mode_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8540_LDO_AUX5,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = ARRAY_SIZE(ldo_vaux56_ab8540_voltages),
|
|
},
|
|
.load_lp_uA = 20000,
|
|
/* values for Vaux5Regu register */
|
|
.update_bank = 0x04,
|
|
.update_reg = 0x32,
|
|
.update_mask = 0x03,
|
|
.update_val = 0x01,
|
|
.update_val_idle = 0x03,
|
|
.update_val_normal = 0x01,
|
|
/* values for Vaux5SEL register */
|
|
.voltage_bank = 0x04,
|
|
.voltage_reg = 0x33,
|
|
.voltage_mask = 0x3f,
|
|
.voltages = ldo_vaux56_ab8540_voltages,
|
|
.voltages_len = ARRAY_SIZE(ldo_vaux56_ab8540_voltages),
|
|
},
|
|
[AB8540_LDO_AUX6] = {
|
|
.desc = {
|
|
.name = "LDO-AUX6",
|
|
.ops = &ab8500_regulator_volt_mode_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8540_LDO_AUX6,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = ARRAY_SIZE(ldo_vaux56_ab8540_voltages),
|
|
},
|
|
.load_lp_uA = 20000,
|
|
/* values for Vaux6Regu register */
|
|
.update_bank = 0x04,
|
|
.update_reg = 0x35,
|
|
.update_mask = 0x03,
|
|
.update_val = 0x01,
|
|
.update_val_idle = 0x03,
|
|
.update_val_normal = 0x01,
|
|
/* values for Vaux6SEL register */
|
|
.voltage_bank = 0x04,
|
|
.voltage_reg = 0x36,
|
|
.voltage_mask = 0x3f,
|
|
.voltages = ldo_vaux56_ab8540_voltages,
|
|
.voltages_len = ARRAY_SIZE(ldo_vaux56_ab8540_voltages),
|
|
},
|
|
[AB8540_LDO_INTCORE] = {
|
|
.desc = {
|
|
.name = "LDO-INTCORE",
|
|
.ops = &ab8500_regulator_volt_mode_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8540_LDO_INTCORE,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = ARRAY_SIZE(ldo_vintcore_voltages),
|
|
.volt_table = ldo_vintcore_voltages,
|
|
},
|
|
.load_lp_uA = 5000,
|
|
.update_bank = 0x03,
|
|
.update_reg = 0x80,
|
|
.update_mask = 0x44,
|
|
.update_val = 0x44,
|
|
.update_val_idle = 0x44,
|
|
.update_val_normal = 0x04,
|
|
.voltage_bank = 0x03,
|
|
.voltage_reg = 0x80,
|
|
.voltage_mask = 0x38,
|
|
.voltage_shift = 3,
|
|
},
|
|
|
|
/*
|
|
* Fixed Voltage Regulators
|
|
* name, fixed mV,
|
|
* update bank, reg, mask, enable val
|
|
*/
|
|
[AB8540_LDO_TVOUT] = {
|
|
.desc = {
|
|
.name = "LDO-TVOUT",
|
|
.ops = &ab8500_regulator_mode_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8540_LDO_TVOUT,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = 1,
|
|
.enable_time = 10000,
|
|
},
|
|
.delay = 10000,
|
|
.load_lp_uA = 1000,
|
|
.update_bank = 0x03,
|
|
.update_reg = 0x80,
|
|
.update_mask = 0x82,
|
|
.update_val = 0x02,
|
|
.update_val_idle = 0x82,
|
|
.update_val_normal = 0x02,
|
|
},
|
|
[AB8540_LDO_AUDIO] = {
|
|
.desc = {
|
|
.name = "LDO-AUDIO",
|
|
.ops = &ab8500_regulator_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8540_LDO_AUDIO,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = 1,
|
|
.volt_table = fixed_2000000_voltage,
|
|
},
|
|
.update_bank = 0x03,
|
|
.update_reg = 0x83,
|
|
.update_mask = 0x02,
|
|
.update_val = 0x02,
|
|
},
|
|
[AB8540_LDO_ANAMIC1] = {
|
|
.desc = {
|
|
.name = "LDO-ANAMIC1",
|
|
.ops = &ab8500_regulator_anamic_mode_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8540_LDO_ANAMIC1,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = 1,
|
|
.volt_table = fixed_2050000_voltage,
|
|
},
|
|
.shared_mode = &ab8540_ldo_anamic1_shared,
|
|
.update_bank = 0x03,
|
|
.update_reg = 0x83,
|
|
.update_mask = 0x08,
|
|
.update_val = 0x08,
|
|
.mode_bank = 0x03,
|
|
.mode_reg = 0x83,
|
|
.mode_mask = 0x20,
|
|
.mode_val_idle = 0x20,
|
|
.mode_val_normal = 0x00,
|
|
},
|
|
[AB8540_LDO_ANAMIC2] = {
|
|
.desc = {
|
|
.name = "LDO-ANAMIC2",
|
|
.ops = &ab8500_regulator_anamic_mode_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8540_LDO_ANAMIC2,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = 1,
|
|
.volt_table = fixed_2050000_voltage,
|
|
},
|
|
.shared_mode = &ab8540_ldo_anamic2_shared,
|
|
.update_bank = 0x03,
|
|
.update_reg = 0x83,
|
|
.update_mask = 0x10,
|
|
.update_val = 0x10,
|
|
.mode_bank = 0x03,
|
|
.mode_reg = 0x83,
|
|
.mode_mask = 0x20,
|
|
.mode_val_idle = 0x20,
|
|
.mode_val_normal = 0x00,
|
|
},
|
|
[AB8540_LDO_DMIC] = {
|
|
.desc = {
|
|
.name = "LDO-DMIC",
|
|
.ops = &ab8500_regulator_volt_mode_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8540_LDO_DMIC,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = ARRAY_SIZE(ldo_vdmic_voltages),
|
|
},
|
|
.load_lp_uA = 1000,
|
|
.update_bank = 0x03,
|
|
.update_reg = 0x83,
|
|
.update_mask = 0x04,
|
|
.update_val = 0x04,
|
|
.voltage_bank = 0x03,
|
|
.voltage_reg = 0x83,
|
|
.voltage_mask = 0xc0,
|
|
.voltages = ldo_vdmic_voltages,
|
|
.voltages_len = ARRAY_SIZE(ldo_vdmic_voltages),
|
|
},
|
|
|
|
/*
|
|
* Regulators with fixed voltage and normal/idle modes
|
|
*/
|
|
[AB8540_LDO_ANA] = {
|
|
.desc = {
|
|
.name = "LDO-ANA",
|
|
.ops = &ab8500_regulator_mode_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8540_LDO_ANA,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = 1,
|
|
.volt_table = fixed_1200000_voltage,
|
|
},
|
|
.load_lp_uA = 1000,
|
|
.update_bank = 0x04,
|
|
.update_reg = 0x06,
|
|
.update_mask = 0x0c,
|
|
.update_val = 0x04,
|
|
.update_val_idle = 0x0c,
|
|
.update_val_normal = 0x04,
|
|
},
|
|
[AB8540_LDO_SDIO] = {
|
|
.desc = {
|
|
.name = "LDO-SDIO",
|
|
.ops = &ab8500_regulator_volt_mode_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.id = AB8540_LDO_SDIO,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = ARRAY_SIZE(ldo_sdio_voltages),
|
|
.volt_table = ldo_sdio_voltages,
|
|
},
|
|
.load_lp_uA = 5000,
|
|
.update_bank = 0x03,
|
|
.update_reg = 0x88,
|
|
.update_mask = 0x30,
|
|
.update_val = 0x10,
|
|
.update_val_idle = 0x30,
|
|
.update_val_normal = 0x10,
|
|
.voltage_bank = 0x03,
|
|
.voltage_reg = 0x88,
|
|
.voltage_mask = 0x07,
|
|
},
|
|
};
|
|
|
|
static struct ab8500_shared_mode ldo_anamic1_shared = {
|
|
.shared_regulator = &ab8505_regulator_info[AB8505_LDO_ANAMIC2],
|
|
};
|
|
|
|
static struct ab8500_shared_mode ldo_anamic2_shared = {
|
|
.shared_regulator = &ab8505_regulator_info[AB8505_LDO_ANAMIC1],
|
|
};
|
|
|
|
static struct ab8500_shared_mode ab8540_ldo_anamic1_shared = {
|
|
.shared_regulator = &ab8540_regulator_info[AB8540_LDO_ANAMIC2],
|
|
};
|
|
|
|
static struct ab8500_shared_mode ab8540_ldo_anamic2_shared = {
|
|
.shared_regulator = &ab8540_regulator_info[AB8540_LDO_ANAMIC1],
|
|
};
|
|
|
|
struct ab8500_reg_init {
|
|
u8 bank;
|
|
u8 addr;
|
|
u8 mask;
|
|
};
|
|
|
|
#define REG_INIT(_id, _bank, _addr, _mask) \
|
|
[_id] = { \
|
|
.bank = _bank, \
|
|
.addr = _addr, \
|
|
.mask = _mask, \
|
|
}
|
|
|
|
/* AB8500 register init */
|
|
static struct ab8500_reg_init ab8500_reg_init[] = {
|
|
/*
|
|
* 0x30, VanaRequestCtrl
|
|
* 0xc0, VextSupply1RequestCtrl
|
|
*/
|
|
REG_INIT(AB8500_REGUREQUESTCTRL2, 0x03, 0x04, 0xf0),
|
|
/*
|
|
* 0x03, VextSupply2RequestCtrl
|
|
* 0x0c, VextSupply3RequestCtrl
|
|
* 0x30, Vaux1RequestCtrl
|
|
* 0xc0, Vaux2RequestCtrl
|
|
*/
|
|
REG_INIT(AB8500_REGUREQUESTCTRL3, 0x03, 0x05, 0xff),
|
|
/*
|
|
* 0x03, Vaux3RequestCtrl
|
|
* 0x04, SwHPReq
|
|
*/
|
|
REG_INIT(AB8500_REGUREQUESTCTRL4, 0x03, 0x06, 0x07),
|
|
/*
|
|
* 0x08, VanaSysClkReq1HPValid
|
|
* 0x20, Vaux1SysClkReq1HPValid
|
|
* 0x40, Vaux2SysClkReq1HPValid
|
|
* 0x80, Vaux3SysClkReq1HPValid
|
|
*/
|
|
REG_INIT(AB8500_REGUSYSCLKREQ1HPVALID1, 0x03, 0x07, 0xe8),
|
|
/*
|
|
* 0x10, VextSupply1SysClkReq1HPValid
|
|
* 0x20, VextSupply2SysClkReq1HPValid
|
|
* 0x40, VextSupply3SysClkReq1HPValid
|
|
*/
|
|
REG_INIT(AB8500_REGUSYSCLKREQ1HPVALID2, 0x03, 0x08, 0x70),
|
|
/*
|
|
* 0x08, VanaHwHPReq1Valid
|
|
* 0x20, Vaux1HwHPReq1Valid
|
|
* 0x40, Vaux2HwHPReq1Valid
|
|
* 0x80, Vaux3HwHPReq1Valid
|
|
*/
|
|
REG_INIT(AB8500_REGUHWHPREQ1VALID1, 0x03, 0x09, 0xe8),
|
|
/*
|
|
* 0x01, VextSupply1HwHPReq1Valid
|
|
* 0x02, VextSupply2HwHPReq1Valid
|
|
* 0x04, VextSupply3HwHPReq1Valid
|
|
*/
|
|
REG_INIT(AB8500_REGUHWHPREQ1VALID2, 0x03, 0x0a, 0x07),
|
|
/*
|
|
* 0x08, VanaHwHPReq2Valid
|
|
* 0x20, Vaux1HwHPReq2Valid
|
|
* 0x40, Vaux2HwHPReq2Valid
|
|
* 0x80, Vaux3HwHPReq2Valid
|
|
*/
|
|
REG_INIT(AB8500_REGUHWHPREQ2VALID1, 0x03, 0x0b, 0xe8),
|
|
/*
|
|
* 0x01, VextSupply1HwHPReq2Valid
|
|
* 0x02, VextSupply2HwHPReq2Valid
|
|
* 0x04, VextSupply3HwHPReq2Valid
|
|
*/
|
|
REG_INIT(AB8500_REGUHWHPREQ2VALID2, 0x03, 0x0c, 0x07),
|
|
/*
|
|
* 0x20, VanaSwHPReqValid
|
|
* 0x80, Vaux1SwHPReqValid
|
|
*/
|
|
REG_INIT(AB8500_REGUSWHPREQVALID1, 0x03, 0x0d, 0xa0),
|
|
/*
|
|
* 0x01, Vaux2SwHPReqValid
|
|
* 0x02, Vaux3SwHPReqValid
|
|
* 0x04, VextSupply1SwHPReqValid
|
|
* 0x08, VextSupply2SwHPReqValid
|
|
* 0x10, VextSupply3SwHPReqValid
|
|
*/
|
|
REG_INIT(AB8500_REGUSWHPREQVALID2, 0x03, 0x0e, 0x1f),
|
|
/*
|
|
* 0x02, SysClkReq2Valid1
|
|
* 0x04, SysClkReq3Valid1
|
|
* 0x08, SysClkReq4Valid1
|
|
* 0x10, SysClkReq5Valid1
|
|
* 0x20, SysClkReq6Valid1
|
|
* 0x40, SysClkReq7Valid1
|
|
* 0x80, SysClkReq8Valid1
|
|
*/
|
|
REG_INIT(AB8500_REGUSYSCLKREQVALID1, 0x03, 0x0f, 0xfe),
|
|
/*
|
|
* 0x02, SysClkReq2Valid2
|
|
* 0x04, SysClkReq3Valid2
|
|
* 0x08, SysClkReq4Valid2
|
|
* 0x10, SysClkReq5Valid2
|
|
* 0x20, SysClkReq6Valid2
|
|
* 0x40, SysClkReq7Valid2
|
|
* 0x80, SysClkReq8Valid2
|
|
*/
|
|
REG_INIT(AB8500_REGUSYSCLKREQVALID2, 0x03, 0x10, 0xfe),
|
|
/*
|
|
* 0x02, VTVoutEna
|
|
* 0x04, Vintcore12Ena
|
|
* 0x38, Vintcore12Sel
|
|
* 0x40, Vintcore12LP
|
|
* 0x80, VTVoutLP
|
|
*/
|
|
REG_INIT(AB8500_REGUMISC1, 0x03, 0x80, 0xfe),
|
|
/*
|
|
* 0x02, VaudioEna
|
|
* 0x04, VdmicEna
|
|
* 0x08, Vamic1Ena
|
|
* 0x10, Vamic2Ena
|
|
*/
|
|
REG_INIT(AB8500_VAUDIOSUPPLY, 0x03, 0x83, 0x1e),
|
|
/*
|
|
* 0x01, Vamic1_dzout
|
|
* 0x02, Vamic2_dzout
|
|
*/
|
|
REG_INIT(AB8500_REGUCTRL1VAMIC, 0x03, 0x84, 0x03),
|
|
/*
|
|
* 0x03, VpllRegu (NOTE! PRCMU register bits)
|
|
* 0x0c, VanaRegu
|
|
*/
|
|
REG_INIT(AB8500_VPLLVANAREGU, 0x04, 0x06, 0x0f),
|
|
/*
|
|
* 0x01, VrefDDREna
|
|
* 0x02, VrefDDRSleepMode
|
|
*/
|
|
REG_INIT(AB8500_VREFDDR, 0x04, 0x07, 0x03),
|
|
/*
|
|
* 0x03, VextSupply1Regu
|
|
* 0x0c, VextSupply2Regu
|
|
* 0x30, VextSupply3Regu
|
|
* 0x40, ExtSupply2Bypass
|
|
* 0x80, ExtSupply3Bypass
|
|
*/
|
|
REG_INIT(AB8500_EXTSUPPLYREGU, 0x04, 0x08, 0xff),
|
|
/*
|
|
* 0x03, Vaux1Regu
|
|
* 0x0c, Vaux2Regu
|
|
*/
|
|
REG_INIT(AB8500_VAUX12REGU, 0x04, 0x09, 0x0f),
|
|
/*
|
|
* 0x03, Vaux3Regu
|
|
*/
|
|
REG_INIT(AB8500_VRF1VAUX3REGU, 0x04, 0x0a, 0x03),
|
|
/*
|
|
* 0x0f, Vaux1Sel
|
|
*/
|
|
REG_INIT(AB8500_VAUX1SEL, 0x04, 0x1f, 0x0f),
|
|
/*
|
|
* 0x0f, Vaux2Sel
|
|
*/
|
|
REG_INIT(AB8500_VAUX2SEL, 0x04, 0x20, 0x0f),
|
|
/*
|
|
* 0x07, Vaux3Sel
|
|
*/
|
|
REG_INIT(AB8500_VRF1VAUX3SEL, 0x04, 0x21, 0x07),
|
|
/*
|
|
* 0x01, VextSupply12LP
|
|
*/
|
|
REG_INIT(AB8500_REGUCTRL2SPARE, 0x04, 0x22, 0x01),
|
|
/*
|
|
* 0x04, Vaux1Disch
|
|
* 0x08, Vaux2Disch
|
|
* 0x10, Vaux3Disch
|
|
* 0x20, Vintcore12Disch
|
|
* 0x40, VTVoutDisch
|
|
* 0x80, VaudioDisch
|
|
*/
|
|
REG_INIT(AB8500_REGUCTRLDISCH, 0x04, 0x43, 0xfc),
|
|
/*
|
|
* 0x02, VanaDisch
|
|
* 0x04, VdmicPullDownEna
|
|
* 0x10, VdmicDisch
|
|
*/
|
|
REG_INIT(AB8500_REGUCTRLDISCH2, 0x04, 0x44, 0x16),
|
|
};
|
|
|
|
/* AB8505 register init */
|
|
static struct ab8500_reg_init ab8505_reg_init[] = {
|
|
/*
|
|
* 0x03, VarmRequestCtrl
|
|
* 0x0c, VsmpsCRequestCtrl
|
|
* 0x30, VsmpsARequestCtrl
|
|
* 0xc0, VsmpsBRequestCtrl
|
|
*/
|
|
REG_INIT(AB8505_REGUREQUESTCTRL1, 0x03, 0x03, 0xff),
|
|
/*
|
|
* 0x03, VsafeRequestCtrl
|
|
* 0x0c, VpllRequestCtrl
|
|
* 0x30, VanaRequestCtrl
|
|
*/
|
|
REG_INIT(AB8505_REGUREQUESTCTRL2, 0x03, 0x04, 0x3f),
|
|
/*
|
|
* 0x30, Vaux1RequestCtrl
|
|
* 0xc0, Vaux2RequestCtrl
|
|
*/
|
|
REG_INIT(AB8505_REGUREQUESTCTRL3, 0x03, 0x05, 0xf0),
|
|
/*
|
|
* 0x03, Vaux3RequestCtrl
|
|
* 0x04, SwHPReq
|
|
*/
|
|
REG_INIT(AB8505_REGUREQUESTCTRL4, 0x03, 0x06, 0x07),
|
|
/*
|
|
* 0x01, VsmpsASysClkReq1HPValid
|
|
* 0x02, VsmpsBSysClkReq1HPValid
|
|
* 0x04, VsafeSysClkReq1HPValid
|
|
* 0x08, VanaSysClkReq1HPValid
|
|
* 0x10, VpllSysClkReq1HPValid
|
|
* 0x20, Vaux1SysClkReq1HPValid
|
|
* 0x40, Vaux2SysClkReq1HPValid
|
|
* 0x80, Vaux3SysClkReq1HPValid
|
|
*/
|
|
REG_INIT(AB8505_REGUSYSCLKREQ1HPVALID1, 0x03, 0x07, 0xff),
|
|
/*
|
|
* 0x01, VsmpsCSysClkReq1HPValid
|
|
* 0x02, VarmSysClkReq1HPValid
|
|
* 0x04, VbbSysClkReq1HPValid
|
|
* 0x08, VsmpsMSysClkReq1HPValid
|
|
*/
|
|
REG_INIT(AB8505_REGUSYSCLKREQ1HPVALID2, 0x03, 0x08, 0x0f),
|
|
/*
|
|
* 0x01, VsmpsAHwHPReq1Valid
|
|
* 0x02, VsmpsBHwHPReq1Valid
|
|
* 0x04, VsafeHwHPReq1Valid
|
|
* 0x08, VanaHwHPReq1Valid
|
|
* 0x10, VpllHwHPReq1Valid
|
|
* 0x20, Vaux1HwHPReq1Valid
|
|
* 0x40, Vaux2HwHPReq1Valid
|
|
* 0x80, Vaux3HwHPReq1Valid
|
|
*/
|
|
REG_INIT(AB8505_REGUHWHPREQ1VALID1, 0x03, 0x09, 0xff),
|
|
/*
|
|
* 0x08, VsmpsMHwHPReq1Valid
|
|
*/
|
|
REG_INIT(AB8505_REGUHWHPREQ1VALID2, 0x03, 0x0a, 0x08),
|
|
/*
|
|
* 0x01, VsmpsAHwHPReq2Valid
|
|
* 0x02, VsmpsBHwHPReq2Valid
|
|
* 0x04, VsafeHwHPReq2Valid
|
|
* 0x08, VanaHwHPReq2Valid
|
|
* 0x10, VpllHwHPReq2Valid
|
|
* 0x20, Vaux1HwHPReq2Valid
|
|
* 0x40, Vaux2HwHPReq2Valid
|
|
* 0x80, Vaux3HwHPReq2Valid
|
|
*/
|
|
REG_INIT(AB8505_REGUHWHPREQ2VALID1, 0x03, 0x0b, 0xff),
|
|
/*
|
|
* 0x08, VsmpsMHwHPReq2Valid
|
|
*/
|
|
REG_INIT(AB8505_REGUHWHPREQ2VALID2, 0x03, 0x0c, 0x08),
|
|
/*
|
|
* 0x01, VsmpsCSwHPReqValid
|
|
* 0x02, VarmSwHPReqValid
|
|
* 0x04, VsmpsASwHPReqValid
|
|
* 0x08, VsmpsBSwHPReqValid
|
|
* 0x10, VsafeSwHPReqValid
|
|
* 0x20, VanaSwHPReqValid
|
|
* 0x40, VpllSwHPReqValid
|
|
* 0x80, Vaux1SwHPReqValid
|
|
*/
|
|
REG_INIT(AB8505_REGUSWHPREQVALID1, 0x03, 0x0d, 0xff),
|
|
/*
|
|
* 0x01, Vaux2SwHPReqValid
|
|
* 0x02, Vaux3SwHPReqValid
|
|
* 0x20, VsmpsMSwHPReqValid
|
|
*/
|
|
REG_INIT(AB8505_REGUSWHPREQVALID2, 0x03, 0x0e, 0x23),
|
|
/*
|
|
* 0x02, SysClkReq2Valid1
|
|
* 0x04, SysClkReq3Valid1
|
|
* 0x08, SysClkReq4Valid1
|
|
*/
|
|
REG_INIT(AB8505_REGUSYSCLKREQVALID1, 0x03, 0x0f, 0x0e),
|
|
/*
|
|
* 0x02, SysClkReq2Valid2
|
|
* 0x04, SysClkReq3Valid2
|
|
* 0x08, SysClkReq4Valid2
|
|
*/
|
|
REG_INIT(AB8505_REGUSYSCLKREQVALID2, 0x03, 0x10, 0x0e),
|
|
/*
|
|
* 0x01, Vaux4SwHPReqValid
|
|
* 0x02, Vaux4HwHPReq2Valid
|
|
* 0x04, Vaux4HwHPReq1Valid
|
|
* 0x08, Vaux4SysClkReq1HPValid
|
|
*/
|
|
REG_INIT(AB8505_REGUVAUX4REQVALID, 0x03, 0x11, 0x0f),
|
|
/*
|
|
* 0x02, VadcEna
|
|
* 0x04, VintCore12Ena
|
|
* 0x38, VintCore12Sel
|
|
* 0x40, VintCore12LP
|
|
* 0x80, VadcLP
|
|
*/
|
|
REG_INIT(AB8505_REGUMISC1, 0x03, 0x80, 0xfe),
|
|
/*
|
|
* 0x02, VaudioEna
|
|
* 0x04, VdmicEna
|
|
* 0x08, Vamic1Ena
|
|
* 0x10, Vamic2Ena
|
|
*/
|
|
REG_INIT(AB8505_VAUDIOSUPPLY, 0x03, 0x83, 0x1e),
|
|
/*
|
|
* 0x01, Vamic1_dzout
|
|
* 0x02, Vamic2_dzout
|
|
*/
|
|
REG_INIT(AB8505_REGUCTRL1VAMIC, 0x03, 0x84, 0x03),
|
|
/*
|
|
* 0x03, VsmpsARegu
|
|
* 0x0c, VsmpsASelCtrl
|
|
* 0x10, VsmpsAAutoMode
|
|
* 0x20, VsmpsAPWMMode
|
|
*/
|
|
REG_INIT(AB8505_VSMPSAREGU, 0x04, 0x03, 0x3f),
|
|
/*
|
|
* 0x03, VsmpsBRegu
|
|
* 0x0c, VsmpsBSelCtrl
|
|
* 0x10, VsmpsBAutoMode
|
|
* 0x20, VsmpsBPWMMode
|
|
*/
|
|
REG_INIT(AB8505_VSMPSBREGU, 0x04, 0x04, 0x3f),
|
|
/*
|
|
* 0x03, VsafeRegu
|
|
* 0x0c, VsafeSelCtrl
|
|
* 0x10, VsafeAutoMode
|
|
* 0x20, VsafePWMMode
|
|
*/
|
|
REG_INIT(AB8505_VSAFEREGU, 0x04, 0x05, 0x3f),
|
|
/*
|
|
* 0x03, VpllRegu (NOTE! PRCMU register bits)
|
|
* 0x0c, VanaRegu
|
|
*/
|
|
REG_INIT(AB8505_VPLLVANAREGU, 0x04, 0x06, 0x0f),
|
|
/*
|
|
* 0x03, VextSupply1Regu
|
|
* 0x0c, VextSupply2Regu
|
|
* 0x30, VextSupply3Regu
|
|
* 0x40, ExtSupply2Bypass
|
|
* 0x80, ExtSupply3Bypass
|
|
*/
|
|
REG_INIT(AB8505_EXTSUPPLYREGU, 0x04, 0x08, 0xff),
|
|
/*
|
|
* 0x03, Vaux1Regu
|
|
* 0x0c, Vaux2Regu
|
|
*/
|
|
REG_INIT(AB8505_VAUX12REGU, 0x04, 0x09, 0x0f),
|
|
/*
|
|
* 0x0f, Vaux3Regu
|
|
*/
|
|
REG_INIT(AB8505_VRF1VAUX3REGU, 0x04, 0x0a, 0x0f),
|
|
/*
|
|
* 0x3f, VsmpsASel1
|
|
*/
|
|
REG_INIT(AB8505_VSMPSASEL1, 0x04, 0x13, 0x3f),
|
|
/*
|
|
* 0x3f, VsmpsASel2
|
|
*/
|
|
REG_INIT(AB8505_VSMPSASEL2, 0x04, 0x14, 0x3f),
|
|
/*
|
|
* 0x3f, VsmpsASel3
|
|
*/
|
|
REG_INIT(AB8505_VSMPSASEL3, 0x04, 0x15, 0x3f),
|
|
/*
|
|
* 0x3f, VsmpsBSel1
|
|
*/
|
|
REG_INIT(AB8505_VSMPSBSEL1, 0x04, 0x17, 0x3f),
|
|
/*
|
|
* 0x3f, VsmpsBSel2
|
|
*/
|
|
REG_INIT(AB8505_VSMPSBSEL2, 0x04, 0x18, 0x3f),
|
|
/*
|
|
* 0x3f, VsmpsBSel3
|
|
*/
|
|
REG_INIT(AB8505_VSMPSBSEL3, 0x04, 0x19, 0x3f),
|
|
/*
|
|
* 0x7f, VsafeSel1
|
|
*/
|
|
REG_INIT(AB8505_VSAFESEL1, 0x04, 0x1b, 0x7f),
|
|
/*
|
|
* 0x3f, VsafeSel2
|
|
*/
|
|
REG_INIT(AB8505_VSAFESEL2, 0x04, 0x1c, 0x7f),
|
|
/*
|
|
* 0x3f, VsafeSel3
|
|
*/
|
|
REG_INIT(AB8505_VSAFESEL3, 0x04, 0x1d, 0x7f),
|
|
/*
|
|
* 0x0f, Vaux1Sel
|
|
*/
|
|
REG_INIT(AB8505_VAUX1SEL, 0x04, 0x1f, 0x0f),
|
|
/*
|
|
* 0x0f, Vaux2Sel
|
|
*/
|
|
REG_INIT(AB8505_VAUX2SEL, 0x04, 0x20, 0x0f),
|
|
/*
|
|
* 0x07, Vaux3Sel
|
|
* 0x30, VRF1Sel
|
|
*/
|
|
REG_INIT(AB8505_VRF1VAUX3SEL, 0x04, 0x21, 0x37),
|
|
/*
|
|
* 0x03, Vaux4RequestCtrl
|
|
*/
|
|
REG_INIT(AB8505_VAUX4REQCTRL, 0x04, 0x2d, 0x03),
|
|
/*
|
|
* 0x03, Vaux4Regu
|
|
*/
|
|
REG_INIT(AB8505_VAUX4REGU, 0x04, 0x2e, 0x03),
|
|
/*
|
|
* 0x0f, Vaux4Sel
|
|
*/
|
|
REG_INIT(AB8505_VAUX4SEL, 0x04, 0x2f, 0x0f),
|
|
/*
|
|
* 0x04, Vaux1Disch
|
|
* 0x08, Vaux2Disch
|
|
* 0x10, Vaux3Disch
|
|
* 0x20, Vintcore12Disch
|
|
* 0x40, VTVoutDisch
|
|
* 0x80, VaudioDisch
|
|
*/
|
|
REG_INIT(AB8505_REGUCTRLDISCH, 0x04, 0x43, 0xfc),
|
|
/*
|
|
* 0x02, VanaDisch
|
|
* 0x04, VdmicPullDownEna
|
|
* 0x10, VdmicDisch
|
|
*/
|
|
REG_INIT(AB8505_REGUCTRLDISCH2, 0x04, 0x44, 0x16),
|
|
/*
|
|
* 0x01, Vaux4Disch
|
|
*/
|
|
REG_INIT(AB8505_REGUCTRLDISCH3, 0x04, 0x48, 0x01),
|
|
/*
|
|
* 0x07, Vaux5Sel
|
|
* 0x08, Vaux5LP
|
|
* 0x10, Vaux5Ena
|
|
* 0x20, Vaux5Disch
|
|
* 0x40, Vaux5DisSfst
|
|
* 0x80, Vaux5DisPulld
|
|
*/
|
|
REG_INIT(AB8505_CTRLVAUX5, 0x01, 0x55, 0xff),
|
|
/*
|
|
* 0x07, Vaux6Sel
|
|
* 0x08, Vaux6LP
|
|
* 0x10, Vaux6Ena
|
|
* 0x80, Vaux6DisPulld
|
|
*/
|
|
REG_INIT(AB8505_CTRLVAUX6, 0x01, 0x56, 0x9f),
|
|
};
|
|
|
|
/* AB9540 register init */
|
|
static struct ab8500_reg_init ab9540_reg_init[] = {
|
|
/*
|
|
* 0x03, VarmRequestCtrl
|
|
* 0x0c, VapeRequestCtrl
|
|
* 0x30, Vsmps1RequestCtrl
|
|
* 0xc0, Vsmps2RequestCtrl
|
|
*/
|
|
REG_INIT(AB9540_REGUREQUESTCTRL1, 0x03, 0x03, 0xff),
|
|
/*
|
|
* 0x03, Vsmps3RequestCtrl
|
|
* 0x0c, VpllRequestCtrl
|
|
* 0x30, VanaRequestCtrl
|
|
* 0xc0, VextSupply1RequestCtrl
|
|
*/
|
|
REG_INIT(AB9540_REGUREQUESTCTRL2, 0x03, 0x04, 0xff),
|
|
/*
|
|
* 0x03, VextSupply2RequestCtrl
|
|
* 0x0c, VextSupply3RequestCtrl
|
|
* 0x30, Vaux1RequestCtrl
|
|
* 0xc0, Vaux2RequestCtrl
|
|
*/
|
|
REG_INIT(AB9540_REGUREQUESTCTRL3, 0x03, 0x05, 0xff),
|
|
/*
|
|
* 0x03, Vaux3RequestCtrl
|
|
* 0x04, SwHPReq
|
|
*/
|
|
REG_INIT(AB9540_REGUREQUESTCTRL4, 0x03, 0x06, 0x07),
|
|
/*
|
|
* 0x01, Vsmps1SysClkReq1HPValid
|
|
* 0x02, Vsmps2SysClkReq1HPValid
|
|
* 0x04, Vsmps3SysClkReq1HPValid
|
|
* 0x08, VanaSysClkReq1HPValid
|
|
* 0x10, VpllSysClkReq1HPValid
|
|
* 0x20, Vaux1SysClkReq1HPValid
|
|
* 0x40, Vaux2SysClkReq1HPValid
|
|
* 0x80, Vaux3SysClkReq1HPValid
|
|
*/
|
|
REG_INIT(AB9540_REGUSYSCLKREQ1HPVALID1, 0x03, 0x07, 0xff),
|
|
/*
|
|
* 0x01, VapeSysClkReq1HPValid
|
|
* 0x02, VarmSysClkReq1HPValid
|
|
* 0x04, VbbSysClkReq1HPValid
|
|
* 0x08, VmodSysClkReq1HPValid
|
|
* 0x10, VextSupply1SysClkReq1HPValid
|
|
* 0x20, VextSupply2SysClkReq1HPValid
|
|
* 0x40, VextSupply3SysClkReq1HPValid
|
|
*/
|
|
REG_INIT(AB9540_REGUSYSCLKREQ1HPVALID2, 0x03, 0x08, 0x7f),
|
|
/*
|
|
* 0x01, Vsmps1HwHPReq1Valid
|
|
* 0x02, Vsmps2HwHPReq1Valid
|
|
* 0x04, Vsmps3HwHPReq1Valid
|
|
* 0x08, VanaHwHPReq1Valid
|
|
* 0x10, VpllHwHPReq1Valid
|
|
* 0x20, Vaux1HwHPReq1Valid
|
|
* 0x40, Vaux2HwHPReq1Valid
|
|
* 0x80, Vaux3HwHPReq1Valid
|
|
*/
|
|
REG_INIT(AB9540_REGUHWHPREQ1VALID1, 0x03, 0x09, 0xff),
|
|
/*
|
|
* 0x01, VextSupply1HwHPReq1Valid
|
|
* 0x02, VextSupply2HwHPReq1Valid
|
|
* 0x04, VextSupply3HwHPReq1Valid
|
|
* 0x08, VmodHwHPReq1Valid
|
|
*/
|
|
REG_INIT(AB9540_REGUHWHPREQ1VALID2, 0x03, 0x0a, 0x0f),
|
|
/*
|
|
* 0x01, Vsmps1HwHPReq2Valid
|
|
* 0x02, Vsmps2HwHPReq2Valid
|
|
* 0x03, Vsmps3HwHPReq2Valid
|
|
* 0x08, VanaHwHPReq2Valid
|
|
* 0x10, VpllHwHPReq2Valid
|
|
* 0x20, Vaux1HwHPReq2Valid
|
|
* 0x40, Vaux2HwHPReq2Valid
|
|
* 0x80, Vaux3HwHPReq2Valid
|
|
*/
|
|
REG_INIT(AB9540_REGUHWHPREQ2VALID1, 0x03, 0x0b, 0xff),
|
|
/*
|
|
* 0x01, VextSupply1HwHPReq2Valid
|
|
* 0x02, VextSupply2HwHPReq2Valid
|
|
* 0x04, VextSupply3HwHPReq2Valid
|
|
* 0x08, VmodHwHPReq2Valid
|
|
*/
|
|
REG_INIT(AB9540_REGUHWHPREQ2VALID2, 0x03, 0x0c, 0x0f),
|
|
/*
|
|
* 0x01, VapeSwHPReqValid
|
|
* 0x02, VarmSwHPReqValid
|
|
* 0x04, Vsmps1SwHPReqValid
|
|
* 0x08, Vsmps2SwHPReqValid
|
|
* 0x10, Vsmps3SwHPReqValid
|
|
* 0x20, VanaSwHPReqValid
|
|
* 0x40, VpllSwHPReqValid
|
|
* 0x80, Vaux1SwHPReqValid
|
|
*/
|
|
REG_INIT(AB9540_REGUSWHPREQVALID1, 0x03, 0x0d, 0xff),
|
|
/*
|
|
* 0x01, Vaux2SwHPReqValid
|
|
* 0x02, Vaux3SwHPReqValid
|
|
* 0x04, VextSupply1SwHPReqValid
|
|
* 0x08, VextSupply2SwHPReqValid
|
|
* 0x10, VextSupply3SwHPReqValid
|
|
* 0x20, VmodSwHPReqValid
|
|
*/
|
|
REG_INIT(AB9540_REGUSWHPREQVALID2, 0x03, 0x0e, 0x3f),
|
|
/*
|
|
* 0x02, SysClkReq2Valid1
|
|
* ...
|
|
* 0x80, SysClkReq8Valid1
|
|
*/
|
|
REG_INIT(AB9540_REGUSYSCLKREQVALID1, 0x03, 0x0f, 0xfe),
|
|
/*
|
|
* 0x02, SysClkReq2Valid2
|
|
* ...
|
|
* 0x80, SysClkReq8Valid2
|
|
*/
|
|
REG_INIT(AB9540_REGUSYSCLKREQVALID2, 0x03, 0x10, 0xfe),
|
|
/*
|
|
* 0x01, Vaux4SwHPReqValid
|
|
* 0x02, Vaux4HwHPReq2Valid
|
|
* 0x04, Vaux4HwHPReq1Valid
|
|
* 0x08, Vaux4SysClkReq1HPValid
|
|
*/
|
|
REG_INIT(AB9540_REGUVAUX4REQVALID, 0x03, 0x11, 0x0f),
|
|
/*
|
|
* 0x02, VTVoutEna
|
|
* 0x04, Vintcore12Ena
|
|
* 0x38, Vintcore12Sel
|
|
* 0x40, Vintcore12LP
|
|
* 0x80, VTVoutLP
|
|
*/
|
|
REG_INIT(AB9540_REGUMISC1, 0x03, 0x80, 0xfe),
|
|
/*
|
|
* 0x02, VaudioEna
|
|
* 0x04, VdmicEna
|
|
* 0x08, Vamic1Ena
|
|
* 0x10, Vamic2Ena
|
|
*/
|
|
REG_INIT(AB9540_VAUDIOSUPPLY, 0x03, 0x83, 0x1e),
|
|
/*
|
|
* 0x01, Vamic1_dzout
|
|
* 0x02, Vamic2_dzout
|
|
*/
|
|
REG_INIT(AB9540_REGUCTRL1VAMIC, 0x03, 0x84, 0x03),
|
|
/*
|
|
* 0x03, Vsmps1Regu
|
|
* 0x0c, Vsmps1SelCtrl
|
|
* 0x10, Vsmps1AutoMode
|
|
* 0x20, Vsmps1PWMMode
|
|
*/
|
|
REG_INIT(AB9540_VSMPS1REGU, 0x04, 0x03, 0x3f),
|
|
/*
|
|
* 0x03, Vsmps2Regu
|
|
* 0x0c, Vsmps2SelCtrl
|
|
* 0x10, Vsmps2AutoMode
|
|
* 0x20, Vsmps2PWMMode
|
|
*/
|
|
REG_INIT(AB9540_VSMPS2REGU, 0x04, 0x04, 0x3f),
|
|
/*
|
|
* 0x03, Vsmps3Regu
|
|
* 0x0c, Vsmps3SelCtrl
|
|
* NOTE! PRCMU register
|
|
*/
|
|
REG_INIT(AB9540_VSMPS3REGU, 0x04, 0x05, 0x0f),
|
|
/*
|
|
* 0x03, VpllRegu
|
|
* 0x0c, VanaRegu
|
|
*/
|
|
REG_INIT(AB9540_VPLLVANAREGU, 0x04, 0x06, 0x0f),
|
|
/*
|
|
* 0x03, VextSupply1Regu
|
|
* 0x0c, VextSupply2Regu
|
|
* 0x30, VextSupply3Regu
|
|
* 0x40, ExtSupply2Bypass
|
|
* 0x80, ExtSupply3Bypass
|
|
*/
|
|
REG_INIT(AB9540_EXTSUPPLYREGU, 0x04, 0x08, 0xff),
|
|
/*
|
|
* 0x03, Vaux1Regu
|
|
* 0x0c, Vaux2Regu
|
|
*/
|
|
REG_INIT(AB9540_VAUX12REGU, 0x04, 0x09, 0x0f),
|
|
/*
|
|
* 0x0c, Vrf1Regu
|
|
* 0x03, Vaux3Regu
|
|
*/
|
|
REG_INIT(AB9540_VRF1VAUX3REGU, 0x04, 0x0a, 0x0f),
|
|
/*
|
|
* 0x3f, Vsmps1Sel1
|
|
*/
|
|
REG_INIT(AB9540_VSMPS1SEL1, 0x04, 0x13, 0x3f),
|
|
/*
|
|
* 0x3f, Vsmps1Sel2
|
|
*/
|
|
REG_INIT(AB9540_VSMPS1SEL2, 0x04, 0x14, 0x3f),
|
|
/*
|
|
* 0x3f, Vsmps1Sel3
|
|
*/
|
|
REG_INIT(AB9540_VSMPS1SEL3, 0x04, 0x15, 0x3f),
|
|
/*
|
|
* 0x3f, Vsmps2Sel1
|
|
*/
|
|
REG_INIT(AB9540_VSMPS2SEL1, 0x04, 0x17, 0x3f),
|
|
/*
|
|
* 0x3f, Vsmps2Sel2
|
|
*/
|
|
REG_INIT(AB9540_VSMPS2SEL2, 0x04, 0x18, 0x3f),
|
|
/*
|
|
* 0x3f, Vsmps2Sel3
|
|
*/
|
|
REG_INIT(AB9540_VSMPS2SEL3, 0x04, 0x19, 0x3f),
|
|
/*
|
|
* 0x7f, Vsmps3Sel1
|
|
* NOTE! PRCMU register
|
|
*/
|
|
REG_INIT(AB9540_VSMPS3SEL1, 0x04, 0x1b, 0x7f),
|
|
/*
|
|
* 0x7f, Vsmps3Sel2
|
|
* NOTE! PRCMU register
|
|
*/
|
|
REG_INIT(AB9540_VSMPS3SEL2, 0x04, 0x1c, 0x7f),
|
|
/*
|
|
* 0x0f, Vaux1Sel
|
|
*/
|
|
REG_INIT(AB9540_VAUX1SEL, 0x04, 0x1f, 0x0f),
|
|
/*
|
|
* 0x0f, Vaux2Sel
|
|
*/
|
|
REG_INIT(AB9540_VAUX2SEL, 0x04, 0x20, 0x0f),
|
|
/*
|
|
* 0x07, Vaux3Sel
|
|
* 0x30, Vrf1Sel
|
|
*/
|
|
REG_INIT(AB9540_VRF1VAUX3SEL, 0x04, 0x21, 0x37),
|
|
/*
|
|
* 0x01, VextSupply12LP
|
|
*/
|
|
REG_INIT(AB9540_REGUCTRL2SPARE, 0x04, 0x22, 0x01),
|
|
/*
|
|
* 0x03, Vaux4RequestCtrl
|
|
*/
|
|
REG_INIT(AB9540_VAUX4REQCTRL, 0x04, 0x2d, 0x03),
|
|
/*
|
|
* 0x03, Vaux4Regu
|
|
*/
|
|
REG_INIT(AB9540_VAUX4REGU, 0x04, 0x2e, 0x03),
|
|
/*
|
|
* 0x08, Vaux4Sel
|
|
*/
|
|
REG_INIT(AB9540_VAUX4SEL, 0x04, 0x2f, 0x0f),
|
|
/*
|
|
* 0x01, VpllDisch
|
|
* 0x02, Vrf1Disch
|
|
* 0x04, Vaux1Disch
|
|
* 0x08, Vaux2Disch
|
|
* 0x10, Vaux3Disch
|
|
* 0x20, Vintcore12Disch
|
|
* 0x40, VTVoutDisch
|
|
* 0x80, VaudioDisch
|
|
*/
|
|
REG_INIT(AB9540_REGUCTRLDISCH, 0x04, 0x43, 0xff),
|
|
/*
|
|
* 0x01, VsimDisch
|
|
* 0x02, VanaDisch
|
|
* 0x04, VdmicPullDownEna
|
|
* 0x08, VpllPullDownEna
|
|
* 0x10, VdmicDisch
|
|
*/
|
|
REG_INIT(AB9540_REGUCTRLDISCH2, 0x04, 0x44, 0x1f),
|
|
/*
|
|
* 0x01, Vaux4Disch
|
|
*/
|
|
REG_INIT(AB9540_REGUCTRLDISCH3, 0x04, 0x48, 0x01),
|
|
};
|
|
|
|
/* AB8540 register init */
|
|
static struct ab8500_reg_init ab8540_reg_init[] = {
|
|
/*
|
|
* 0x01, VSimSycClkReq1Valid
|
|
* 0x02, VSimSycClkReq2Valid
|
|
* 0x04, VSimSycClkReq3Valid
|
|
* 0x08, VSimSycClkReq4Valid
|
|
* 0x10, VSimSycClkReq5Valid
|
|
* 0x20, VSimSycClkReq6Valid
|
|
* 0x40, VSimSycClkReq7Valid
|
|
* 0x80, VSimSycClkReq8Valid
|
|
*/
|
|
REG_INIT(AB8540_VSIMSYSCLKCTRL, 0x02, 0x33, 0xff),
|
|
/*
|
|
* 0x03, VarmRequestCtrl
|
|
* 0x0c, VapeRequestCtrl
|
|
* 0x30, Vsmps1RequestCtrl
|
|
* 0xc0, Vsmps2RequestCtrl
|
|
*/
|
|
REG_INIT(AB8540_REGUREQUESTCTRL1, 0x03, 0x03, 0xff),
|
|
/*
|
|
* 0x03, Vsmps3RequestCtrl
|
|
* 0x0c, VpllRequestCtrl
|
|
* 0x30, VanaRequestCtrl
|
|
* 0xc0, VextSupply1RequestCtrl
|
|
*/
|
|
REG_INIT(AB8540_REGUREQUESTCTRL2, 0x03, 0x04, 0xff),
|
|
/*
|
|
* 0x03, VextSupply2RequestCtrl
|
|
* 0x0c, VextSupply3RequestCtrl
|
|
* 0x30, Vaux1RequestCtrl
|
|
* 0xc0, Vaux2RequestCtrl
|
|
*/
|
|
REG_INIT(AB8540_REGUREQUESTCTRL3, 0x03, 0x05, 0xff),
|
|
/*
|
|
* 0x03, Vaux3RequestCtrl
|
|
* 0x04, SwHPReq
|
|
*/
|
|
REG_INIT(AB8540_REGUREQUESTCTRL4, 0x03, 0x06, 0x07),
|
|
/*
|
|
* 0x01, Vsmps1SysClkReq1HPValid
|
|
* 0x02, Vsmps2SysClkReq1HPValid
|
|
* 0x04, Vsmps3SysClkReq1HPValid
|
|
* 0x08, VanaSysClkReq1HPValid
|
|
* 0x10, VpllSysClkReq1HPValid
|
|
* 0x20, Vaux1SysClkReq1HPValid
|
|
* 0x40, Vaux2SysClkReq1HPValid
|
|
* 0x80, Vaux3SysClkReq1HPValid
|
|
*/
|
|
REG_INIT(AB8540_REGUSYSCLKREQ1HPVALID1, 0x03, 0x07, 0xff),
|
|
/*
|
|
* 0x01, VapeSysClkReq1HPValid
|
|
* 0x02, VarmSysClkReq1HPValid
|
|
* 0x04, VbbSysClkReq1HPValid
|
|
* 0x10, VextSupply1SysClkReq1HPValid
|
|
* 0x20, VextSupply2SysClkReq1HPValid
|
|
* 0x40, VextSupply3SysClkReq1HPValid
|
|
*/
|
|
REG_INIT(AB8540_REGUSYSCLKREQ1HPVALID2, 0x03, 0x08, 0x77),
|
|
/*
|
|
* 0x01, Vsmps1HwHPReq1Valid
|
|
* 0x02, Vsmps2HwHPReq1Valid
|
|
* 0x04, Vsmps3HwHPReq1Valid
|
|
* 0x08, VanaHwHPReq1Valid
|
|
* 0x10, VpllHwHPReq1Valid
|
|
* 0x20, Vaux1HwHPReq1Valid
|
|
* 0x40, Vaux2HwHPReq1Valid
|
|
* 0x80, Vaux3HwHPReq1Valid
|
|
*/
|
|
REG_INIT(AB8540_REGUHWHPREQ1VALID1, 0x03, 0x09, 0xff),
|
|
/*
|
|
* 0x01, VextSupply1HwHPReq1Valid
|
|
* 0x02, VextSupply2HwHPReq1Valid
|
|
* 0x04, VextSupply3HwHPReq1Valid
|
|
*/
|
|
REG_INIT(AB8540_REGUHWHPREQ1VALID2, 0x03, 0x0a, 0x07),
|
|
/*
|
|
* 0x01, Vsmps1HwHPReq2Valid
|
|
* 0x02, Vsmps2HwHPReq2Valid
|
|
* 0x03, Vsmps3HwHPReq2Valid
|
|
* 0x08, VanaHwHPReq2Valid
|
|
* 0x10, VpllHwHPReq2Valid
|
|
* 0x20, Vaux1HwHPReq2Valid
|
|
* 0x40, Vaux2HwHPReq2Valid
|
|
* 0x80, Vaux3HwHPReq2Valid
|
|
*/
|
|
REG_INIT(AB8540_REGUHWHPREQ2VALID1, 0x03, 0x0b, 0xff),
|
|
/*
|
|
* 0x01, VextSupply1HwHPReq2Valid
|
|
* 0x02, VextSupply2HwHPReq2Valid
|
|
* 0x04, VextSupply3HwHPReq2Valid
|
|
*/
|
|
REG_INIT(AB8540_REGUHWHPREQ2VALID2, 0x03, 0x0c, 0x07),
|
|
/*
|
|
* 0x01, VapeSwHPReqValid
|
|
* 0x02, VarmSwHPReqValid
|
|
* 0x04, Vsmps1SwHPReqValid
|
|
* 0x08, Vsmps2SwHPReqValid
|
|
* 0x10, Vsmps3SwHPReqValid
|
|
* 0x20, VanaSwHPReqValid
|
|
* 0x40, VpllSwHPReqValid
|
|
* 0x80, Vaux1SwHPReqValid
|
|
*/
|
|
REG_INIT(AB8540_REGUSWHPREQVALID1, 0x03, 0x0d, 0xff),
|
|
/*
|
|
* 0x01, Vaux2SwHPReqValid
|
|
* 0x02, Vaux3SwHPReqValid
|
|
* 0x04, VextSupply1SwHPReqValid
|
|
* 0x08, VextSupply2SwHPReqValid
|
|
* 0x10, VextSupply3SwHPReqValid
|
|
*/
|
|
REG_INIT(AB8540_REGUSWHPREQVALID2, 0x03, 0x0e, 0x1f),
|
|
/*
|
|
* 0x02, SysClkReq2Valid1
|
|
* ...
|
|
* 0x80, SysClkReq8Valid1
|
|
*/
|
|
REG_INIT(AB8540_REGUSYSCLKREQVALID1, 0x03, 0x0f, 0xff),
|
|
/*
|
|
* 0x02, SysClkReq2Valid2
|
|
* ...
|
|
* 0x80, SysClkReq8Valid2
|
|
*/
|
|
REG_INIT(AB8540_REGUSYSCLKREQVALID2, 0x03, 0x10, 0xff),
|
|
/*
|
|
* 0x01, Vaux4SwHPReqValid
|
|
* 0x02, Vaux4HwHPReq2Valid
|
|
* 0x04, Vaux4HwHPReq1Valid
|
|
* 0x08, Vaux4SysClkReq1HPValid
|
|
*/
|
|
REG_INIT(AB8540_REGUVAUX4REQVALID, 0x03, 0x11, 0x0f),
|
|
/*
|
|
* 0x01, Vaux5SwHPReqValid
|
|
* 0x02, Vaux5HwHPReq2Valid
|
|
* 0x04, Vaux5HwHPReq1Valid
|
|
* 0x08, Vaux5SysClkReq1HPValid
|
|
*/
|
|
REG_INIT(AB8540_REGUVAUX5REQVALID, 0x03, 0x12, 0x0f),
|
|
/*
|
|
* 0x01, Vaux6SwHPReqValid
|
|
* 0x02, Vaux6HwHPReq2Valid
|
|
* 0x04, Vaux6HwHPReq1Valid
|
|
* 0x08, Vaux6SysClkReq1HPValid
|
|
*/
|
|
REG_INIT(AB8540_REGUVAUX6REQVALID, 0x03, 0x13, 0x0f),
|
|
/*
|
|
* 0x01, VclkbSwHPReqValid
|
|
* 0x02, VclkbHwHPReq2Valid
|
|
* 0x04, VclkbHwHPReq1Valid
|
|
* 0x08, VclkbSysClkReq1HPValid
|
|
*/
|
|
REG_INIT(AB8540_REGUVCLKBREQVALID, 0x03, 0x14, 0x0f),
|
|
/*
|
|
* 0x01, Vrf1SwHPReqValid
|
|
* 0x02, Vrf1HwHPReq2Valid
|
|
* 0x04, Vrf1HwHPReq1Valid
|
|
* 0x08, Vrf1SysClkReq1HPValid
|
|
*/
|
|
REG_INIT(AB8540_REGUVRF1REQVALID, 0x03, 0x15, 0x0f),
|
|
/*
|
|
* 0x02, VTVoutEna
|
|
* 0x04, Vintcore12Ena
|
|
* 0x38, Vintcore12Sel
|
|
* 0x40, Vintcore12LP
|
|
* 0x80, VTVoutLP
|
|
*/
|
|
REG_INIT(AB8540_REGUMISC1, 0x03, 0x80, 0xfe),
|
|
/*
|
|
* 0x02, VaudioEna
|
|
* 0x04, VdmicEna
|
|
* 0x08, Vamic1Ena
|
|
* 0x10, Vamic2Ena
|
|
* 0x20, Vamic12LP
|
|
* 0xC0, VdmicSel
|
|
*/
|
|
REG_INIT(AB8540_VAUDIOSUPPLY, 0x03, 0x83, 0xfe),
|
|
/*
|
|
* 0x01, Vamic1_dzout
|
|
* 0x02, Vamic2_dzout
|
|
*/
|
|
REG_INIT(AB8540_REGUCTRL1VAMIC, 0x03, 0x84, 0x03),
|
|
/*
|
|
* 0x07, VHSICSel
|
|
* 0x08, VHSICOffState
|
|
* 0x10, VHSIEna
|
|
* 0x20, VHSICLP
|
|
*/
|
|
REG_INIT(AB8540_VHSIC, 0x03, 0x87, 0x3f),
|
|
/*
|
|
* 0x07, VSDIOSel
|
|
* 0x08, VSDIOOffState
|
|
* 0x10, VSDIOEna
|
|
* 0x20, VSDIOLP
|
|
*/
|
|
REG_INIT(AB8540_VSDIO, 0x03, 0x88, 0x3f),
|
|
/*
|
|
* 0x03, Vsmps1Regu
|
|
* 0x0c, Vsmps1SelCtrl
|
|
* 0x10, Vsmps1AutoMode
|
|
* 0x20, Vsmps1PWMMode
|
|
*/
|
|
REG_INIT(AB8540_VSMPS1REGU, 0x04, 0x03, 0x3f),
|
|
/*
|
|
* 0x03, Vsmps2Regu
|
|
* 0x0c, Vsmps2SelCtrl
|
|
* 0x10, Vsmps2AutoMode
|
|
* 0x20, Vsmps2PWMMode
|
|
*/
|
|
REG_INIT(AB8540_VSMPS2REGU, 0x04, 0x04, 0x3f),
|
|
/*
|
|
* 0x03, Vsmps3Regu
|
|
* 0x0c, Vsmps3SelCtrl
|
|
* 0x10, Vsmps3AutoMode
|
|
* 0x20, Vsmps3PWMMode
|
|
* NOTE! PRCMU register
|
|
*/
|
|
REG_INIT(AB8540_VSMPS3REGU, 0x04, 0x05, 0x0f),
|
|
/*
|
|
* 0x03, VpllRegu
|
|
* 0x0c, VanaRegu
|
|
*/
|
|
REG_INIT(AB8540_VPLLVANAREGU, 0x04, 0x06, 0x0f),
|
|
/*
|
|
* 0x03, VextSupply1Regu
|
|
* 0x0c, VextSupply2Regu
|
|
* 0x30, VextSupply3Regu
|
|
* 0x40, ExtSupply2Bypass
|
|
* 0x80, ExtSupply3Bypass
|
|
*/
|
|
REG_INIT(AB8540_EXTSUPPLYREGU, 0x04, 0x08, 0xff),
|
|
/*
|
|
* 0x03, Vaux1Regu
|
|
* 0x0c, Vaux2Regu
|
|
*/
|
|
REG_INIT(AB8540_VAUX12REGU, 0x04, 0x09, 0x0f),
|
|
/*
|
|
* 0x0c, VRF1Regu
|
|
* 0x03, Vaux3Regu
|
|
*/
|
|
REG_INIT(AB8540_VRF1VAUX3REGU, 0x04, 0x0a, 0x0f),
|
|
/*
|
|
* 0x3f, Vsmps1Sel1
|
|
*/
|
|
REG_INIT(AB8540_VSMPS1SEL1, 0x04, 0x13, 0x3f),
|
|
/*
|
|
* 0x3f, Vsmps1Sel2
|
|
*/
|
|
REG_INIT(AB8540_VSMPS1SEL2, 0x04, 0x14, 0x3f),
|
|
/*
|
|
* 0x3f, Vsmps1Sel3
|
|
*/
|
|
REG_INIT(AB8540_VSMPS1SEL3, 0x04, 0x15, 0x3f),
|
|
/*
|
|
* 0x3f, Vsmps2Sel1
|
|
*/
|
|
REG_INIT(AB8540_VSMPS2SEL1, 0x04, 0x17, 0x3f),
|
|
/*
|
|
* 0x3f, Vsmps2Sel2
|
|
*/
|
|
REG_INIT(AB8540_VSMPS2SEL2, 0x04, 0x18, 0x3f),
|
|
/*
|
|
* 0x3f, Vsmps2Sel3
|
|
*/
|
|
REG_INIT(AB8540_VSMPS2SEL3, 0x04, 0x19, 0x3f),
|
|
/*
|
|
* 0x7f, Vsmps3Sel1
|
|
* NOTE! PRCMU register
|
|
*/
|
|
REG_INIT(AB8540_VSMPS3SEL1, 0x04, 0x1b, 0x7f),
|
|
/*
|
|
* 0x7f, Vsmps3Sel2
|
|
* NOTE! PRCMU register
|
|
*/
|
|
REG_INIT(AB8540_VSMPS3SEL2, 0x04, 0x1c, 0x7f),
|
|
/*
|
|
* 0x0f, Vaux1Sel
|
|
*/
|
|
REG_INIT(AB8540_VAUX1SEL, 0x04, 0x1f, 0x0f),
|
|
/*
|
|
* 0x0f, Vaux2Sel
|
|
*/
|
|
REG_INIT(AB8540_VAUX2SEL, 0x04, 0x20, 0x0f),
|
|
/*
|
|
* 0x07, Vaux3Sel
|
|
* 0x70, Vrf1Sel
|
|
*/
|
|
REG_INIT(AB8540_VRF1VAUX3SEL, 0x04, 0x21, 0x77),
|
|
/*
|
|
* 0x01, VextSupply12LP
|
|
*/
|
|
REG_INIT(AB8540_REGUCTRL2SPARE, 0x04, 0x22, 0x01),
|
|
/*
|
|
* 0x07, Vanasel
|
|
* 0x30, Vpllsel
|
|
*/
|
|
REG_INIT(AB8540_VANAVPLLSEL, 0x04, 0x29, 0x37),
|
|
/*
|
|
* 0x03, Vaux4RequestCtrl
|
|
*/
|
|
REG_INIT(AB8540_VAUX4REQCTRL, 0x04, 0x2d, 0x03),
|
|
/*
|
|
* 0x03, Vaux4Regu
|
|
*/
|
|
REG_INIT(AB8540_VAUX4REGU, 0x04, 0x2e, 0x03),
|
|
/*
|
|
* 0x0f, Vaux4Sel
|
|
*/
|
|
REG_INIT(AB8540_VAUX4SEL, 0x04, 0x2f, 0x0f),
|
|
/*
|
|
* 0x03, Vaux5RequestCtrl
|
|
*/
|
|
REG_INIT(AB8540_VAUX5REQCTRL, 0x04, 0x31, 0x03),
|
|
/*
|
|
* 0x03, Vaux5Regu
|
|
*/
|
|
REG_INIT(AB8540_VAUX5REGU, 0x04, 0x32, 0x03),
|
|
/*
|
|
* 0x3f, Vaux5Sel
|
|
*/
|
|
REG_INIT(AB8540_VAUX5SEL, 0x04, 0x33, 0x3f),
|
|
/*
|
|
* 0x03, Vaux6RequestCtrl
|
|
*/
|
|
REG_INIT(AB8540_VAUX6REQCTRL, 0x04, 0x34, 0x03),
|
|
/*
|
|
* 0x03, Vaux6Regu
|
|
*/
|
|
REG_INIT(AB8540_VAUX6REGU, 0x04, 0x35, 0x03),
|
|
/*
|
|
* 0x3f, Vaux6Sel
|
|
*/
|
|
REG_INIT(AB8540_VAUX6SEL, 0x04, 0x36, 0x3f),
|
|
/*
|
|
* 0x03, VCLKBRequestCtrl
|
|
*/
|
|
REG_INIT(AB8540_VCLKBREQCTRL, 0x04, 0x37, 0x03),
|
|
/*
|
|
* 0x03, VCLKBRegu
|
|
*/
|
|
REG_INIT(AB8540_VCLKBREGU, 0x04, 0x38, 0x03),
|
|
/*
|
|
* 0x07, VCLKBSel
|
|
*/
|
|
REG_INIT(AB8540_VCLKBSEL, 0x04, 0x39, 0x07),
|
|
/*
|
|
* 0x03, Vrf1RequestCtrl
|
|
*/
|
|
REG_INIT(AB8540_VRF1REQCTRL, 0x04, 0x3a, 0x03),
|
|
/*
|
|
* 0x01, VpllDisch
|
|
* 0x02, Vrf1Disch
|
|
* 0x04, Vaux1Disch
|
|
* 0x08, Vaux2Disch
|
|
* 0x10, Vaux3Disch
|
|
* 0x20, Vintcore12Disch
|
|
* 0x40, VTVoutDisch
|
|
* 0x80, VaudioDisch
|
|
*/
|
|
REG_INIT(AB8540_REGUCTRLDISCH, 0x04, 0x43, 0xff),
|
|
/*
|
|
* 0x02, VanaDisch
|
|
* 0x04, VdmicPullDownEna
|
|
* 0x08, VpllPullDownEna
|
|
* 0x10, VdmicDisch
|
|
*/
|
|
REG_INIT(AB8540_REGUCTRLDISCH2, 0x04, 0x44, 0x1e),
|
|
/*
|
|
* 0x01, Vaux4Disch
|
|
*/
|
|
REG_INIT(AB8540_REGUCTRLDISCH3, 0x04, 0x48, 0x01),
|
|
/*
|
|
* 0x01, Vaux5Disch
|
|
* 0x02, Vaux6Disch
|
|
* 0x04, VCLKBDisch
|
|
*/
|
|
REG_INIT(AB8540_REGUCTRLDISCH4, 0x04, 0x49, 0x07),
|
|
};
|
|
|
|
static struct {
|
|
struct ab8500_regulator_info *info;
|
|
int info_size;
|
|
struct ab8500_reg_init *init;
|
|
int init_size;
|
|
struct of_regulator_match *match;
|
|
int match_size;
|
|
} abx500_regulator;
|
|
|
|
static int ab8500_regulator_init_registers(struct platform_device *pdev,
|
|
int id, int mask, int value)
|
|
{
|
|
struct ab8500_reg_init *reg_init = abx500_regulator.init;
|
|
int err;
|
|
|
|
BUG_ON(value & ~mask);
|
|
BUG_ON(mask & ~reg_init[id].mask);
|
|
|
|
/* initialize register */
|
|
err = abx500_mask_and_set_register_interruptible(
|
|
&pdev->dev,
|
|
reg_init[id].bank,
|
|
reg_init[id].addr,
|
|
mask, value);
|
|
if (err < 0) {
|
|
dev_err(&pdev->dev,
|
|
"Failed to initialize 0x%02x, 0x%02x.\n",
|
|
reg_init[id].bank,
|
|
reg_init[id].addr);
|
|
return err;
|
|
}
|
|
dev_vdbg(&pdev->dev,
|
|
" init: 0x%02x, 0x%02x, 0x%02x, 0x%02x\n",
|
|
reg_init[id].bank,
|
|
reg_init[id].addr,
|
|
mask, value);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ab8500_regulator_register(struct platform_device *pdev,
|
|
struct regulator_init_data *init_data,
|
|
int id, struct device_node *np)
|
|
{
|
|
struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
|
|
struct ab8500_regulator_info *info = NULL;
|
|
struct regulator_config config = { };
|
|
int err;
|
|
|
|
/* assign per-regulator data */
|
|
info = &abx500_regulator.info[id];
|
|
info->dev = &pdev->dev;
|
|
|
|
config.dev = &pdev->dev;
|
|
config.init_data = init_data;
|
|
config.driver_data = info;
|
|
config.of_node = np;
|
|
|
|
/* fix for hardware before ab8500v2.0 */
|
|
if (is_ab8500_1p1_or_earlier(ab8500)) {
|
|
if (info->desc.id == AB8500_LDO_AUX3) {
|
|
info->desc.n_voltages =
|
|
ARRAY_SIZE(ldo_vauxn_voltages);
|
|
info->desc.volt_table = ldo_vauxn_voltages;
|
|
info->voltage_mask = 0xf;
|
|
}
|
|
}
|
|
|
|
/* register regulator with framework */
|
|
info->regulator = regulator_register(&info->desc, &config);
|
|
if (IS_ERR(info->regulator)) {
|
|
err = PTR_ERR(info->regulator);
|
|
dev_err(&pdev->dev, "failed to register regulator %s\n",
|
|
info->desc.name);
|
|
/* when we fail, un-register all earlier regulators */
|
|
while (--id >= 0) {
|
|
info = &abx500_regulator.info[id];
|
|
regulator_unregister(info->regulator);
|
|
}
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct of_regulator_match ab8500_regulator_match[] = {
|
|
{ .name = "ab8500_ldo_aux1", .driver_data = (void *) AB8500_LDO_AUX1, },
|
|
{ .name = "ab8500_ldo_aux2", .driver_data = (void *) AB8500_LDO_AUX2, },
|
|
{ .name = "ab8500_ldo_aux3", .driver_data = (void *) AB8500_LDO_AUX3, },
|
|
{ .name = "ab8500_ldo_intcore", .driver_data = (void *) AB8500_LDO_INTCORE, },
|
|
{ .name = "ab8500_ldo_tvout", .driver_data = (void *) AB8500_LDO_TVOUT, },
|
|
{ .name = "ab8500_ldo_audio", .driver_data = (void *) AB8500_LDO_AUDIO, },
|
|
{ .name = "ab8500_ldo_anamic1", .driver_data = (void *) AB8500_LDO_ANAMIC1, },
|
|
{ .name = "ab8500_ldo_amamic2", .driver_data = (void *) AB8500_LDO_ANAMIC2, },
|
|
{ .name = "ab8500_ldo_dmic", .driver_data = (void *) AB8500_LDO_DMIC, },
|
|
{ .name = "ab8500_ldo_ana", .driver_data = (void *) AB8500_LDO_ANA, },
|
|
};
|
|
|
|
static struct of_regulator_match ab8505_regulator_match[] = {
|
|
{ .name = "ab8500_ldo_aux1", .driver_data = (void *) AB8505_LDO_AUX1, },
|
|
{ .name = "ab8500_ldo_aux2", .driver_data = (void *) AB8505_LDO_AUX2, },
|
|
{ .name = "ab8500_ldo_aux3", .driver_data = (void *) AB8505_LDO_AUX3, },
|
|
{ .name = "ab8500_ldo_aux4", .driver_data = (void *) AB8505_LDO_AUX4, },
|
|
{ .name = "ab8500_ldo_aux5", .driver_data = (void *) AB8505_LDO_AUX5, },
|
|
{ .name = "ab8500_ldo_aux6", .driver_data = (void *) AB8505_LDO_AUX6, },
|
|
{ .name = "ab8500_ldo_intcore", .driver_data = (void *) AB8505_LDO_INTCORE, },
|
|
{ .name = "ab8500_ldo_adc", .driver_data = (void *) AB8505_LDO_ADC, },
|
|
{ .name = "ab8500_ldo_audio", .driver_data = (void *) AB8505_LDO_AUDIO, },
|
|
{ .name = "ab8500_ldo_anamic1", .driver_data = (void *) AB8505_LDO_ANAMIC1, },
|
|
{ .name = "ab8500_ldo_amamic2", .driver_data = (void *) AB8505_LDO_ANAMIC2, },
|
|
{ .name = "ab8500_ldo_aux8", .driver_data = (void *) AB8505_LDO_AUX8, },
|
|
{ .name = "ab8500_ldo_ana", .driver_data = (void *) AB8505_LDO_ANA, },
|
|
};
|
|
|
|
static struct of_regulator_match ab8540_regulator_match[] = {
|
|
{ .name = "ab8500_ldo_aux1", .driver_data = (void *) AB8540_LDO_AUX1, },
|
|
{ .name = "ab8500_ldo_aux2", .driver_data = (void *) AB8540_LDO_AUX2, },
|
|
{ .name = "ab8500_ldo_aux3", .driver_data = (void *) AB8540_LDO_AUX3, },
|
|
{ .name = "ab8500_ldo_aux4", .driver_data = (void *) AB8540_LDO_AUX4, },
|
|
{ .name = "ab8500_ldo_aux5", .driver_data = (void *) AB8540_LDO_AUX5, },
|
|
{ .name = "ab8500_ldo_aux6", .driver_data = (void *) AB8540_LDO_AUX6, },
|
|
{ .name = "ab8500_ldo_intcore", .driver_data = (void *) AB8540_LDO_INTCORE, },
|
|
{ .name = "ab8500_ldo_tvout", .driver_data = (void *) AB8540_LDO_TVOUT, },
|
|
{ .name = "ab8500_ldo_audio", .driver_data = (void *) AB8540_LDO_AUDIO, },
|
|
{ .name = "ab8500_ldo_anamic1", .driver_data = (void *) AB8540_LDO_ANAMIC1, },
|
|
{ .name = "ab8500_ldo_amamic2", .driver_data = (void *) AB8540_LDO_ANAMIC2, },
|
|
{ .name = "ab8500_ldo_dmic", .driver_data = (void *) AB8540_LDO_DMIC, },
|
|
{ .name = "ab8500_ldo_ana", .driver_data = (void *) AB8540_LDO_ANA, },
|
|
{ .name = "ab8500_ldo_sdio", .driver_data = (void *) AB8540_LDO_SDIO, },
|
|
};
|
|
|
|
static struct of_regulator_match ab9540_regulator_match[] = {
|
|
{ .name = "ab8500_ldo_aux1", .driver_data = (void *) AB9540_LDO_AUX1, },
|
|
{ .name = "ab8500_ldo_aux2", .driver_data = (void *) AB9540_LDO_AUX2, },
|
|
{ .name = "ab8500_ldo_aux3", .driver_data = (void *) AB9540_LDO_AUX3, },
|
|
{ .name = "ab8500_ldo_aux4", .driver_data = (void *) AB9540_LDO_AUX4, },
|
|
{ .name = "ab8500_ldo_intcore", .driver_data = (void *) AB9540_LDO_INTCORE, },
|
|
{ .name = "ab8500_ldo_tvout", .driver_data = (void *) AB9540_LDO_TVOUT, },
|
|
{ .name = "ab8500_ldo_audio", .driver_data = (void *) AB9540_LDO_AUDIO, },
|
|
{ .name = "ab8500_ldo_anamic1", .driver_data = (void *) AB9540_LDO_ANAMIC1, },
|
|
{ .name = "ab8500_ldo_amamic2", .driver_data = (void *) AB9540_LDO_ANAMIC2, },
|
|
{ .name = "ab8500_ldo_dmic", .driver_data = (void *) AB9540_LDO_DMIC, },
|
|
{ .name = "ab8500_ldo_ana", .driver_data = (void *) AB9540_LDO_ANA, },
|
|
};
|
|
|
|
static void abx500_get_regulator_info(struct ab8500 *ab8500)
|
|
{
|
|
if (is_ab9540(ab8500)) {
|
|
abx500_regulator.info = ab9540_regulator_info;
|
|
abx500_regulator.info_size = ARRAY_SIZE(ab9540_regulator_info);
|
|
abx500_regulator.init = ab9540_reg_init;
|
|
abx500_regulator.init_size = AB9540_NUM_REGULATOR_REGISTERS;
|
|
abx500_regulator.match = ab9540_regulator_match;
|
|
abx500_regulator.match_size = ARRAY_SIZE(ab9540_regulator_match);
|
|
} else if (is_ab8505(ab8500)) {
|
|
abx500_regulator.info = ab8505_regulator_info;
|
|
abx500_regulator.info_size = ARRAY_SIZE(ab8505_regulator_info);
|
|
abx500_regulator.init = ab8505_reg_init;
|
|
abx500_regulator.init_size = AB8505_NUM_REGULATOR_REGISTERS;
|
|
abx500_regulator.match = ab8505_regulator_match;
|
|
abx500_regulator.match_size = ARRAY_SIZE(ab8505_regulator_match);
|
|
} else if (is_ab8540(ab8500)) {
|
|
abx500_regulator.info = ab8540_regulator_info;
|
|
abx500_regulator.info_size = ARRAY_SIZE(ab8540_regulator_info);
|
|
abx500_regulator.init = ab8540_reg_init;
|
|
abx500_regulator.init_size = AB8540_NUM_REGULATOR_REGISTERS;
|
|
abx500_regulator.match = ab8540_regulator_match;
|
|
abx500_regulator.match_size = ARRAY_SIZE(ab8540_regulator_match);
|
|
} else {
|
|
abx500_regulator.info = ab8500_regulator_info;
|
|
abx500_regulator.info_size = ARRAY_SIZE(ab8500_regulator_info);
|
|
abx500_regulator.init = ab8500_reg_init;
|
|
abx500_regulator.init_size = AB8500_NUM_REGULATOR_REGISTERS;
|
|
abx500_regulator.match = ab8500_regulator_match;
|
|
abx500_regulator.match_size = ARRAY_SIZE(ab8500_regulator_match);
|
|
}
|
|
}
|
|
|
|
static int
|
|
ab8500_regulator_of_probe(struct platform_device *pdev,
|
|
struct device_node *np)
|
|
{
|
|
struct of_regulator_match *match = abx500_regulator.match;
|
|
int err, i;
|
|
|
|
for (i = 0; i < abx500_regulator.info_size; i++) {
|
|
err = ab8500_regulator_register(
|
|
pdev, match[i].init_data, i, match[i].of_node);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ab8500_regulator_probe(struct platform_device *pdev)
|
|
{
|
|
struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct ab8500_platform_data *ppdata;
|
|
struct ab8500_regulator_platform_data *pdata;
|
|
int i, err;
|
|
|
|
if (!ab8500) {
|
|
dev_err(&pdev->dev, "null mfd parent\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
abx500_get_regulator_info(ab8500);
|
|
|
|
if (np) {
|
|
err = of_regulator_match(&pdev->dev, np,
|
|
abx500_regulator.match,
|
|
abx500_regulator.match_size);
|
|
if (err < 0) {
|
|
dev_err(&pdev->dev,
|
|
"Error parsing regulator init data: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
err = ab8500_regulator_of_probe(pdev, np);
|
|
return err;
|
|
}
|
|
|
|
ppdata = dev_get_platdata(ab8500->dev);
|
|
if (!ppdata) {
|
|
dev_err(&pdev->dev, "null parent pdata\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
pdata = ppdata->regulator;
|
|
if (!pdata) {
|
|
dev_err(&pdev->dev, "null pdata\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* make sure the platform data has the correct size */
|
|
if (pdata->num_regulator != abx500_regulator.info_size) {
|
|
dev_err(&pdev->dev, "Configuration error: size mismatch.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* initialize debug (initial state is recorded with this call) */
|
|
err = ab8500_regulator_debug_init(pdev);
|
|
if (err)
|
|
return err;
|
|
|
|
/* initialize registers */
|
|
for (i = 0; i < pdata->num_reg_init; i++) {
|
|
int id, mask, value;
|
|
|
|
id = pdata->reg_init[i].id;
|
|
mask = pdata->reg_init[i].mask;
|
|
value = pdata->reg_init[i].value;
|
|
|
|
/* check for configuration errors */
|
|
BUG_ON(id >= abx500_regulator.init_size);
|
|
|
|
err = ab8500_regulator_init_registers(pdev, id, mask, value);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
|
|
if (!is_ab8505(ab8500)) {
|
|
/* register external regulators (before Vaux1, 2 and 3) */
|
|
err = ab8500_ext_regulator_init(pdev);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
/* register all regulators */
|
|
for (i = 0; i < abx500_regulator.info_size; i++) {
|
|
err = ab8500_regulator_register(pdev, &pdata->regulator[i],
|
|
i, NULL);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ab8500_regulator_remove(struct platform_device *pdev)
|
|
{
|
|
int i, err;
|
|
struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
|
|
|
|
for (i = 0; i < abx500_regulator.info_size; i++) {
|
|
struct ab8500_regulator_info *info = NULL;
|
|
info = &abx500_regulator.info[i];
|
|
|
|
dev_vdbg(rdev_get_dev(info->regulator),
|
|
"%s-remove\n", info->desc.name);
|
|
|
|
regulator_unregister(info->regulator);
|
|
}
|
|
|
|
if (!is_ab8505(ab8500)) {
|
|
/* remove external regulators (after Vaux1, 2 and 3) */
|
|
err = ab8500_ext_regulator_exit(pdev);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
/* remove regulator debug */
|
|
err = ab8500_regulator_debug_exit(pdev);
|
|
if (err)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver ab8500_regulator_driver = {
|
|
.probe = ab8500_regulator_probe,
|
|
.remove = ab8500_regulator_remove,
|
|
.driver = {
|
|
.name = "ab8500-regulator",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
static int __init ab8500_regulator_init(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = platform_driver_register(&ab8500_regulator_driver);
|
|
if (ret != 0)
|
|
pr_err("Failed to register ab8500 regulator: %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
subsys_initcall(ab8500_regulator_init);
|
|
|
|
static void __exit ab8500_regulator_exit(void)
|
|
{
|
|
platform_driver_unregister(&ab8500_regulator_driver);
|
|
}
|
|
module_exit(ab8500_regulator_exit);
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_AUTHOR("Sundar Iyer <sundar.iyer@stericsson.com>");
|
|
MODULE_AUTHOR("Bengt Jonsson <bengt.g.jonsson@stericsson.com>");
|
|
MODULE_AUTHOR("Daniel Willerud <daniel.willerud@stericsson.com>");
|
|
MODULE_DESCRIPTION("Regulator Driver for ST-Ericsson AB8500 Mixed-Sig PMIC");
|
|
MODULE_ALIAS("platform:ab8500-regulator");
|