forked from Minki/linux
a4b1aeb726
Remove unused key_val field in struct mpr121_touchkey. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
316 lines
8.1 KiB
C
316 lines
8.1 KiB
C
/*
|
|
* Touchkey driver for Freescale MPR121 Controllor
|
|
*
|
|
* Copyright (C) 2011 Freescale Semiconductor, Inc.
|
|
* Author: Zhang Jiejing <jiejing.zhang@freescale.com>
|
|
*
|
|
* Based on mcs_touchkey.c
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/input.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/i2c/mpr121_touchkey.h>
|
|
|
|
/* Register definitions */
|
|
#define ELE_TOUCH_STATUS_0_ADDR 0x0
|
|
#define ELE_TOUCH_STATUS_1_ADDR 0X1
|
|
#define MHD_RISING_ADDR 0x2b
|
|
#define NHD_RISING_ADDR 0x2c
|
|
#define NCL_RISING_ADDR 0x2d
|
|
#define FDL_RISING_ADDR 0x2e
|
|
#define MHD_FALLING_ADDR 0x2f
|
|
#define NHD_FALLING_ADDR 0x30
|
|
#define NCL_FALLING_ADDR 0x31
|
|
#define FDL_FALLING_ADDR 0x32
|
|
#define ELE0_TOUCH_THRESHOLD_ADDR 0x41
|
|
#define ELE0_RELEASE_THRESHOLD_ADDR 0x42
|
|
#define AFE_CONF_ADDR 0x5c
|
|
#define FILTER_CONF_ADDR 0x5d
|
|
|
|
/*
|
|
* ELECTRODE_CONF_ADDR: This register configures the number of
|
|
* enabled capacitance sensing inputs and its run/suspend mode.
|
|
*/
|
|
#define ELECTRODE_CONF_ADDR 0x5e
|
|
#define ELECTRODE_CONF_QUICK_CHARGE 0x80
|
|
#define AUTO_CONFIG_CTRL_ADDR 0x7b
|
|
#define AUTO_CONFIG_USL_ADDR 0x7d
|
|
#define AUTO_CONFIG_LSL_ADDR 0x7e
|
|
#define AUTO_CONFIG_TL_ADDR 0x7f
|
|
|
|
/* Threshold of touch/release trigger */
|
|
#define TOUCH_THRESHOLD 0x08
|
|
#define RELEASE_THRESHOLD 0x05
|
|
/* Masks for touch and release triggers */
|
|
#define TOUCH_STATUS_MASK 0xfff
|
|
/* MPR121 has 12 keys */
|
|
#define MPR121_MAX_KEY_COUNT 12
|
|
|
|
struct mpr121_touchkey {
|
|
struct i2c_client *client;
|
|
struct input_dev *input_dev;
|
|
unsigned int statusbits;
|
|
unsigned int keycount;
|
|
u16 keycodes[MPR121_MAX_KEY_COUNT];
|
|
};
|
|
|
|
struct mpr121_init_register {
|
|
int addr;
|
|
u8 val;
|
|
};
|
|
|
|
static const struct mpr121_init_register init_reg_table[] = {
|
|
{ MHD_RISING_ADDR, 0x1 },
|
|
{ NHD_RISING_ADDR, 0x1 },
|
|
{ MHD_FALLING_ADDR, 0x1 },
|
|
{ NHD_FALLING_ADDR, 0x1 },
|
|
{ NCL_FALLING_ADDR, 0xff },
|
|
{ FDL_FALLING_ADDR, 0x02 },
|
|
{ FILTER_CONF_ADDR, 0x04 },
|
|
{ AFE_CONF_ADDR, 0x0b },
|
|
{ AUTO_CONFIG_CTRL_ADDR, 0x0b },
|
|
};
|
|
|
|
static irqreturn_t mpr_touchkey_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct mpr121_touchkey *mpr121 = dev_id;
|
|
struct i2c_client *client = mpr121->client;
|
|
struct input_dev *input = mpr121->input_dev;
|
|
unsigned int key_num, key_val, pressed;
|
|
int reg;
|
|
|
|
reg = i2c_smbus_read_byte_data(client, ELE_TOUCH_STATUS_1_ADDR);
|
|
if (reg < 0) {
|
|
dev_err(&client->dev, "i2c read error [%d]\n", reg);
|
|
goto out;
|
|
}
|
|
|
|
reg <<= 8;
|
|
reg |= i2c_smbus_read_byte_data(client, ELE_TOUCH_STATUS_0_ADDR);
|
|
if (reg < 0) {
|
|
dev_err(&client->dev, "i2c read error [%d]\n", reg);
|
|
goto out;
|
|
}
|
|
|
|
reg &= TOUCH_STATUS_MASK;
|
|
/* use old press bit to figure out which bit changed */
|
|
key_num = ffs(reg ^ mpr121->statusbits) - 1;
|
|
pressed = reg & (1 << key_num);
|
|
mpr121->statusbits = reg;
|
|
|
|
key_val = mpr121->keycodes[key_num];
|
|
|
|
input_event(input, EV_MSC, MSC_SCAN, key_num);
|
|
input_report_key(input, key_val, pressed);
|
|
input_sync(input);
|
|
|
|
dev_dbg(&client->dev, "key %d %d %s\n", key_num, key_val,
|
|
pressed ? "pressed" : "released");
|
|
|
|
out:
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int mpr121_phys_init(const struct mpr121_platform_data *pdata,
|
|
struct mpr121_touchkey *mpr121,
|
|
struct i2c_client *client)
|
|
{
|
|
const struct mpr121_init_register *reg;
|
|
unsigned char usl, lsl, tl, eleconf;
|
|
int i, t, vdd, ret;
|
|
|
|
/* Set up touch/release threshold for ele0-ele11 */
|
|
for (i = 0; i <= MPR121_MAX_KEY_COUNT; i++) {
|
|
t = ELE0_TOUCH_THRESHOLD_ADDR + (i * 2);
|
|
ret = i2c_smbus_write_byte_data(client, t, TOUCH_THRESHOLD);
|
|
if (ret < 0)
|
|
goto err_i2c_write;
|
|
ret = i2c_smbus_write_byte_data(client, t + 1,
|
|
RELEASE_THRESHOLD);
|
|
if (ret < 0)
|
|
goto err_i2c_write;
|
|
}
|
|
|
|
/* Set up init register */
|
|
for (i = 0; i < ARRAY_SIZE(init_reg_table); i++) {
|
|
reg = &init_reg_table[i];
|
|
ret = i2c_smbus_write_byte_data(client, reg->addr, reg->val);
|
|
if (ret < 0)
|
|
goto err_i2c_write;
|
|
}
|
|
|
|
|
|
/*
|
|
* Capacitance on sensing input varies and needs to be compensated.
|
|
* The internal MPR121-auto-configuration can do this if it's
|
|
* registers are set properly (based on pdata->vdd_uv).
|
|
*/
|
|
vdd = pdata->vdd_uv / 1000;
|
|
usl = ((vdd - 700) * 256) / vdd;
|
|
lsl = (usl * 65) / 100;
|
|
tl = (usl * 90) / 100;
|
|
ret = i2c_smbus_write_byte_data(client, AUTO_CONFIG_USL_ADDR, usl);
|
|
ret |= i2c_smbus_write_byte_data(client, AUTO_CONFIG_LSL_ADDR, lsl);
|
|
ret |= i2c_smbus_write_byte_data(client, AUTO_CONFIG_TL_ADDR, tl);
|
|
|
|
/*
|
|
* Quick charge bit will let the capacitive charge to ready
|
|
* state quickly, or the buttons may not function after system
|
|
* boot.
|
|
*/
|
|
eleconf = mpr121->keycount | ELECTRODE_CONF_QUICK_CHARGE;
|
|
ret |= i2c_smbus_write_byte_data(client, ELECTRODE_CONF_ADDR,
|
|
eleconf);
|
|
if (ret != 0)
|
|
goto err_i2c_write;
|
|
|
|
dev_dbg(&client->dev, "set up with %x keys.\n", mpr121->keycount);
|
|
|
|
return 0;
|
|
|
|
err_i2c_write:
|
|
dev_err(&client->dev, "i2c write error: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int mpr_touchkey_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
const struct mpr121_platform_data *pdata =
|
|
dev_get_platdata(&client->dev);
|
|
struct mpr121_touchkey *mpr121;
|
|
struct input_dev *input_dev;
|
|
int error;
|
|
int i;
|
|
|
|
if (!pdata) {
|
|
dev_err(&client->dev, "no platform data defined\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!pdata->keymap || !pdata->keymap_size) {
|
|
dev_err(&client->dev, "missing keymap data\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (pdata->keymap_size > MPR121_MAX_KEY_COUNT) {
|
|
dev_err(&client->dev, "too many keys defined\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!client->irq) {
|
|
dev_err(&client->dev, "irq number should not be zero\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
mpr121 = devm_kzalloc(&client->dev, sizeof(*mpr121),
|
|
GFP_KERNEL);
|
|
if (!mpr121)
|
|
return -ENOMEM;
|
|
|
|
input_dev = devm_input_allocate_device(&client->dev);
|
|
if (!input_dev)
|
|
return -ENOMEM;
|
|
|
|
mpr121->client = client;
|
|
mpr121->input_dev = input_dev;
|
|
mpr121->keycount = pdata->keymap_size;
|
|
|
|
input_dev->name = "Freescale MPR121 Touchkey";
|
|
input_dev->id.bustype = BUS_I2C;
|
|
input_dev->dev.parent = &client->dev;
|
|
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
|
|
|
|
input_dev->keycode = mpr121->keycodes;
|
|
input_dev->keycodesize = sizeof(mpr121->keycodes[0]);
|
|
input_dev->keycodemax = mpr121->keycount;
|
|
|
|
for (i = 0; i < pdata->keymap_size; i++) {
|
|
input_set_capability(input_dev, EV_KEY, pdata->keymap[i]);
|
|
mpr121->keycodes[i] = pdata->keymap[i];
|
|
}
|
|
|
|
error = mpr121_phys_init(pdata, mpr121, client);
|
|
if (error) {
|
|
dev_err(&client->dev, "Failed to init register\n");
|
|
return error;
|
|
}
|
|
|
|
error = devm_request_threaded_irq(&client->dev, client->irq, NULL,
|
|
mpr_touchkey_interrupt,
|
|
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
|
|
client->dev.driver->name, mpr121);
|
|
if (error) {
|
|
dev_err(&client->dev, "Failed to register interrupt\n");
|
|
return error;
|
|
}
|
|
|
|
error = input_register_device(input_dev);
|
|
if (error)
|
|
return error;
|
|
|
|
i2c_set_clientdata(client, mpr121);
|
|
device_init_wakeup(&client->dev, pdata->wakeup);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused mpr_suspend(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
|
|
if (device_may_wakeup(&client->dev))
|
|
enable_irq_wake(client->irq);
|
|
|
|
i2c_smbus_write_byte_data(client, ELECTRODE_CONF_ADDR, 0x00);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused mpr_resume(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct mpr121_touchkey *mpr121 = i2c_get_clientdata(client);
|
|
|
|
if (device_may_wakeup(&client->dev))
|
|
disable_irq_wake(client->irq);
|
|
|
|
i2c_smbus_write_byte_data(client, ELECTRODE_CONF_ADDR,
|
|
mpr121->keycount);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(mpr121_touchkey_pm_ops, mpr_suspend, mpr_resume);
|
|
|
|
static const struct i2c_device_id mpr121_id[] = {
|
|
{ "mpr121_touchkey", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, mpr121_id);
|
|
|
|
static struct i2c_driver mpr_touchkey_driver = {
|
|
.driver = {
|
|
.name = "mpr121",
|
|
.pm = &mpr121_touchkey_pm_ops,
|
|
},
|
|
.id_table = mpr121_id,
|
|
.probe = mpr_touchkey_probe,
|
|
};
|
|
|
|
module_i2c_driver(mpr_touchkey_driver);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Zhang Jiejing <jiejing.zhang@freescale.com>");
|
|
MODULE_DESCRIPTION("Touch Key driver for Freescale MPR121 Chip");
|