linux/arch/arm/boot/dts/stuib.dtsi
Lee Jones 7cf261dd1e ARM: ux500: Change IRQ from low-to-high edge triggered to high-to-low
When the STMPE IRQ is triggered to be active high level-sensitive, the
Nomadik GPIO controller it uses complains, although it still works.
Recently we attempted to move triggering to low-to-high in an attempt
to prevent the warning; however, this ensured that the IRQ was actually
missed completely. Now we have a solution which both works and keeps the
GPIO controller happy.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-01 23:20:14 +01:00

79 lines
1.5 KiB
Plaintext

/*
* Copyright 2012 ST-Ericsson AB
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/ {
soc-u9500 {
i2c@80004000 {
stmpe1601: stmpe1601@40 {
compatible = "st,stmpe1601";
reg = <0x40>;
interrupts = <26 0x2>;
interrupt-parent = <&gpio6>;
interrupt-controller;
wakeup-source;
st,autosleep-timeout = <1024>;
stmpe_keypad {
compatible = "st,stmpe-keypad";
debounce-interval = <64>;
st,scan-count = <8>;
st,no-autorepeat;
linux,keymap = <0x205006b
0x4010074
0x3050072
0x1030004
0x502006a
0x500000a
0x5008b
0x706001c
0x405000b
0x6070003
0x3040067
0x303006c
0x60400e7
0x602009e
0x4020073
0x5050002
0x4030069
0x3020008>;
};
};
};
i2c@80110000 {
bu21013_tp@0x5c {
compatible = "rhom,bu21013_tp";
reg = <0x5c>;
touch-gpio = <&gpio2 20 0x4>;
avdd-supply = <&ab8500_ldo_aux1_reg>;
rhom,touch-max-x = <384>;
rhom,touch-max-y = <704>;
rhom,flip-y;
};
bu21013_tp@0x5d {
compatible = "rhom,bu21013_tp";
reg = <0x5d>;
touch-gpio = <&gpio2 20 0x4>;
avdd-supply = <&ab8500_ldo_aux1_reg>;
rhom,touch-max-x = <384>;
rhom,touch-max-y = <704>;
rhom,flip-y;
};
};
};
};