forked from Minki/linux
a45cb698a7
This moves the input-pulled-up setting for GPIO217 as used on the HREFs prior to v60 from the boardfile to the device tree. GPIO218 is only used with the TVK UIB so move it to that .dtsi file. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
878 lines
34 KiB
C
878 lines
34 KiB
C
/*
|
|
* Copyright (C) ST-Ericsson SA 2010
|
|
*
|
|
* License terms: GNU General Public License (GPL) version 2
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/bug.h>
|
|
#include <linux/string.h>
|
|
#include <linux/pinctrl/machine.h>
|
|
#include <linux/pinctrl/pinconf-generic.h>
|
|
#include <linux/platform_data/pinctrl-nomadik.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
|
|
#include "board-mop500.h"
|
|
|
|
enum custom_pin_cfg_t {
|
|
PINS_FOR_DEFAULT,
|
|
PINS_FOR_U9500,
|
|
};
|
|
|
|
static enum custom_pin_cfg_t pinsfor;
|
|
|
|
/* These simply sets bias for pins */
|
|
#define BIAS(a,b) static unsigned long a[] = { b }
|
|
|
|
BIAS(pd, PIN_PULL_DOWN);
|
|
BIAS(in_nopull, PIN_INPUT_NOPULL);
|
|
BIAS(in_pu, PIN_INPUT_PULLUP);
|
|
BIAS(in_pd, PIN_INPUT_PULLDOWN);
|
|
BIAS(out_hi, PIN_OUTPUT_HIGH);
|
|
BIAS(out_lo, PIN_OUTPUT_LOW);
|
|
|
|
BIAS(abx500_out_lo, PIN_CONF_PACKED(PIN_CONFIG_OUTPUT, 0));
|
|
BIAS(abx500_in_pd, PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_DOWN, 1));
|
|
BIAS(abx500_in_nopull, PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_DOWN, 0));
|
|
|
|
/* These also force them into GPIO mode */
|
|
BIAS(gpio_in_pu, PIN_INPUT_PULLUP|PIN_GPIOMODE_ENABLED);
|
|
BIAS(gpio_in_pd, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED);
|
|
BIAS(gpio_in_pu_slpm_gpio_nopull, PIN_INPUT_PULLUP|PIN_GPIOMODE_ENABLED|PIN_SLPM_GPIO|PIN_SLPM_INPUT_NOPULL);
|
|
BIAS(gpio_in_pd_slpm_gpio_nopull, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED|PIN_SLPM_GPIO|PIN_SLPM_INPUT_NOPULL);
|
|
BIAS(gpio_out_hi, PIN_OUTPUT_HIGH|PIN_GPIOMODE_ENABLED);
|
|
BIAS(gpio_out_lo, PIN_OUTPUT_LOW|PIN_GPIOMODE_ENABLED);
|
|
/* Sleep modes */
|
|
BIAS(slpm_in_wkup_pdis, PIN_SLEEPMODE_ENABLED|
|
|
PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
|
|
BIAS(slpm_in_wkup_pdis_en, PIN_SLEEPMODE_ENABLED|
|
|
PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED);
|
|
BIAS(slpm_wkup_pdis, PIN_SLEEPMODE_ENABLED|
|
|
PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
|
|
BIAS(slpm_wkup_pdis_en, PIN_SLEEPMODE_ENABLED|
|
|
PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED);
|
|
BIAS(slpm_out_lo_pdis, PIN_SLEEPMODE_ENABLED|
|
|
PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE|PIN_SLPM_PDIS_DISABLED);
|
|
BIAS(slpm_out_lo_wkup_pdis, PIN_SLEEPMODE_ENABLED|
|
|
PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
|
|
BIAS(slpm_out_hi_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_OUTPUT_HIGH|
|
|
PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
|
|
BIAS(slpm_in_pu_wkup_pdis_en, PIN_SLEEPMODE_ENABLED|PIN_SLPM_INPUT_PULLUP|
|
|
PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED);
|
|
|
|
/* We use these to define hog settings that are always done on boot */
|
|
#define DB8500_MUX_HOG(group,func) \
|
|
PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-db8500", group, func)
|
|
#define DB8500_PIN_HOG(pin,conf) \
|
|
PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-db8500", pin, conf)
|
|
|
|
/* These are default states associated with device and changed runtime */
|
|
#define DB8500_MUX(group,func,dev) \
|
|
PIN_MAP_MUX_GROUP_DEFAULT(dev, "pinctrl-db8500", group, func)
|
|
#define DB8500_PIN(pin,conf,dev) \
|
|
PIN_MAP_CONFIGS_PIN_DEFAULT(dev, "pinctrl-db8500", pin, conf)
|
|
#define DB8500_PIN_IDLE(pin, conf, dev) \
|
|
PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_IDLE, "pinctrl-db8500", \
|
|
pin, conf)
|
|
#define DB8500_PIN_SLEEP(pin, conf, dev) \
|
|
PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_SLEEP, "pinctrl-db8500", \
|
|
pin, conf)
|
|
#define DB8500_MUX_STATE(group, func, dev, state) \
|
|
PIN_MAP_MUX_GROUP(dev, state, "pinctrl-db8500", group, func)
|
|
#define DB8500_PIN_STATE(pin, conf, dev, state) \
|
|
PIN_MAP_CONFIGS_PIN(dev, state, "pinctrl-db8500", pin, conf)
|
|
|
|
#define AB8500_MUX_HOG(group, func) \
|
|
PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-ab8500.0", group, func)
|
|
#define AB8500_PIN_HOG(pin, conf) \
|
|
PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-ab8500.0", pin, abx500_##conf)
|
|
|
|
#define AB8500_MUX_STATE(group, func, dev, state) \
|
|
PIN_MAP_MUX_GROUP(dev, state, "pinctrl-ab8500.0", group, func)
|
|
#define AB8500_PIN_STATE(pin, conf, dev, state) \
|
|
PIN_MAP_CONFIGS_PIN(dev, state, "pinctrl-ab8500.0", pin, abx500_##conf)
|
|
|
|
#define AB8505_MUX_HOG(group, func) \
|
|
PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-ab8505.0", group, func)
|
|
#define AB8505_PIN_HOG(pin, conf) \
|
|
PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-ab8505.0", pin, abx500_##conf)
|
|
|
|
#define AB8505_MUX_STATE(group, func, dev, state) \
|
|
PIN_MAP_MUX_GROUP(dev, state, "pinctrl-ab8505.0", group, func)
|
|
#define AB8505_PIN_STATE(pin, conf, dev, state) \
|
|
PIN_MAP_CONFIGS_PIN(dev, state, "pinctrl-ab8505.0", pin, abx500_##conf)
|
|
|
|
static struct pinctrl_map __initdata ab8500_pinmap[] = {
|
|
/* Sysclkreq2 */
|
|
AB8500_MUX_STATE("sysclkreq2_d_1", "sysclkreq", "regulator.35", PINCTRL_STATE_DEFAULT),
|
|
AB8500_PIN_STATE("GPIO1_T10", in_nopull, "regulator.35", PINCTRL_STATE_DEFAULT),
|
|
/* sysclkreq2 disable, mux in gpio configured in input pulldown */
|
|
AB8500_MUX_STATE("gpio1_a_1", "gpio", "regulator.35", PINCTRL_STATE_SLEEP),
|
|
AB8500_PIN_STATE("GPIO1_T10", in_pd, "regulator.35", PINCTRL_STATE_SLEEP),
|
|
|
|
/* pins 2 is muxed in GPIO, configured in INPUT PULL DOWN */
|
|
AB8500_MUX_HOG("gpio2_a_1", "gpio"),
|
|
AB8500_PIN_HOG("GPIO2_T9", in_pd),
|
|
|
|
/* Sysclkreq4 */
|
|
AB8500_MUX_STATE("sysclkreq4_d_1", "sysclkreq", "regulator.36", PINCTRL_STATE_DEFAULT),
|
|
AB8500_PIN_STATE("GPIO3_U9", in_nopull, "regulator.36", PINCTRL_STATE_DEFAULT),
|
|
/* sysclkreq4 disable, mux in gpio configured in input pulldown */
|
|
AB8500_MUX_STATE("gpio3_a_1", "gpio", "regulator.36", PINCTRL_STATE_SLEEP),
|
|
AB8500_PIN_STATE("GPIO3_U9", in_pd, "regulator.36", PINCTRL_STATE_SLEEP),
|
|
|
|
/* pins 4 is muxed in GPIO, configured in INPUT PULL DOWN */
|
|
AB8500_MUX_HOG("gpio4_a_1", "gpio"),
|
|
AB8500_PIN_HOG("GPIO4_W2", in_pd),
|
|
|
|
/*
|
|
* pins 6,7,8 and 9 are muxed in YCBCR0123
|
|
* configured in INPUT PULL UP
|
|
*/
|
|
AB8500_MUX_HOG("ycbcr0123_d_1", "ycbcr"),
|
|
AB8500_PIN_HOG("GPIO6_Y18", in_nopull),
|
|
AB8500_PIN_HOG("GPIO7_AA20", in_nopull),
|
|
AB8500_PIN_HOG("GPIO8_W18", in_nopull),
|
|
AB8500_PIN_HOG("GPIO9_AA19", in_nopull),
|
|
|
|
/*
|
|
* pins 10,11,12 and 13 are muxed in GPIO
|
|
* configured in INPUT PULL DOWN
|
|
*/
|
|
AB8500_MUX_HOG("gpio10_d_1", "gpio"),
|
|
AB8500_PIN_HOG("GPIO10_U17", in_pd),
|
|
|
|
AB8500_MUX_HOG("gpio11_d_1", "gpio"),
|
|
AB8500_PIN_HOG("GPIO11_AA18", in_pd),
|
|
|
|
AB8500_MUX_HOG("gpio12_d_1", "gpio"),
|
|
AB8500_PIN_HOG("GPIO12_U16", in_pd),
|
|
|
|
AB8500_MUX_HOG("gpio13_d_1", "gpio"),
|
|
AB8500_PIN_HOG("GPIO13_W17", in_pd),
|
|
|
|
/*
|
|
* pins 14,15 are muxed in PWM1 and PWM2
|
|
* configured in INPUT PULL DOWN
|
|
*/
|
|
AB8500_MUX_HOG("pwmout1_d_1", "pwmout"),
|
|
AB8500_PIN_HOG("GPIO14_F14", in_pd),
|
|
|
|
AB8500_MUX_HOG("pwmout2_d_1", "pwmout"),
|
|
AB8500_PIN_HOG("GPIO15_B17", in_pd),
|
|
|
|
/*
|
|
* pins 16 is muxed in GPIO
|
|
* configured in INPUT PULL DOWN
|
|
*/
|
|
AB8500_MUX_HOG("gpio16_a_1", "gpio"),
|
|
AB8500_PIN_HOG("GPIO14_F14", in_pd),
|
|
|
|
/*
|
|
* pins 17,18,19 and 20 are muxed in AUDIO interface 1
|
|
* configured in INPUT PULL DOWN
|
|
*/
|
|
AB8500_MUX_HOG("adi1_d_1", "adi1"),
|
|
AB8500_PIN_HOG("GPIO17_P5", in_pd),
|
|
AB8500_PIN_HOG("GPIO18_R5", in_pd),
|
|
AB8500_PIN_HOG("GPIO19_U5", in_pd),
|
|
AB8500_PIN_HOG("GPIO20_T5", in_pd),
|
|
|
|
/*
|
|
* pins 21,22 and 23 are muxed in USB UICC
|
|
* configured in INPUT PULL DOWN
|
|
*/
|
|
AB8500_MUX_HOG("usbuicc_d_1", "usbuicc"),
|
|
AB8500_PIN_HOG("GPIO21_H19", in_pd),
|
|
AB8500_PIN_HOG("GPIO22_G20", in_pd),
|
|
AB8500_PIN_HOG("GPIO23_G19", in_pd),
|
|
|
|
/*
|
|
* pins 24,25 are muxed in GPIO
|
|
* configured in INPUT PULL DOWN
|
|
*/
|
|
AB8500_MUX_HOG("gpio24_a_1", "gpio"),
|
|
AB8500_PIN_HOG("GPIO24_T14", in_pd),
|
|
|
|
AB8500_MUX_HOG("gpio25_a_1", "gpio"),
|
|
AB8500_PIN_HOG("GPIO25_R16", in_pd),
|
|
|
|
/*
|
|
* pins 26 is muxed in GPIO
|
|
* configured in OUTPUT LOW
|
|
*/
|
|
AB8500_MUX_HOG("gpio26_d_1", "gpio"),
|
|
AB8500_PIN_HOG("GPIO26_M16", out_lo),
|
|
|
|
/*
|
|
* pins 27,28 are muxed in DMIC12
|
|
* configured in INPUT PULL DOWN
|
|
*/
|
|
AB8500_MUX_HOG("dmic12_d_1", "dmic"),
|
|
AB8500_PIN_HOG("GPIO27_J6", in_pd),
|
|
AB8500_PIN_HOG("GPIO28_K6", in_pd),
|
|
|
|
/*
|
|
* pins 29,30 are muxed in DMIC34
|
|
* configured in INPUT PULL DOWN
|
|
*/
|
|
AB8500_MUX_HOG("dmic34_d_1", "dmic"),
|
|
AB8500_PIN_HOG("GPIO29_G6", in_pd),
|
|
AB8500_PIN_HOG("GPIO30_H6", in_pd),
|
|
|
|
/*
|
|
* pins 31,32 are muxed in DMIC56
|
|
* configured in INPUT PULL DOWN
|
|
*/
|
|
AB8500_MUX_HOG("dmic56_d_1", "dmic"),
|
|
AB8500_PIN_HOG("GPIO31_F5", in_pd),
|
|
AB8500_PIN_HOG("GPIO32_G5", in_pd),
|
|
|
|
/*
|
|
* pins 34 is muxed in EXTCPENA
|
|
* configured INPUT PULL DOWN
|
|
*/
|
|
AB8500_MUX_HOG("extcpena_d_1", "extcpena"),
|
|
AB8500_PIN_HOG("GPIO34_R17", in_pd),
|
|
|
|
/*
|
|
* pins 35 is muxed in GPIO
|
|
* configured in OUTPUT LOW
|
|
*/
|
|
AB8500_MUX_HOG("gpio35_d_1", "gpio"),
|
|
AB8500_PIN_HOG("GPIO35_W15", in_pd),
|
|
|
|
/*
|
|
* pins 36,37,38 and 39 are muxed in GPIO
|
|
* configured in INPUT PULL DOWN
|
|
*/
|
|
AB8500_MUX_HOG("gpio36_a_1", "gpio"),
|
|
AB8500_PIN_HOG("GPIO36_A17", in_pd),
|
|
|
|
AB8500_MUX_HOG("gpio37_a_1", "gpio"),
|
|
AB8500_PIN_HOG("GPIO37_E15", in_pd),
|
|
|
|
AB8500_MUX_HOG("gpio38_a_1", "gpio"),
|
|
AB8500_PIN_HOG("GPIO38_C17", in_pd),
|
|
|
|
AB8500_MUX_HOG("gpio39_a_1", "gpio"),
|
|
AB8500_PIN_HOG("GPIO39_E16", in_pd),
|
|
|
|
/*
|
|
* pins 40 and 41 are muxed in MODCSLSDA
|
|
* configured INPUT PULL DOWN
|
|
*/
|
|
AB8500_MUX_HOG("modsclsda_d_1", "modsclsda"),
|
|
AB8500_PIN_HOG("GPIO40_T19", in_pd),
|
|
AB8500_PIN_HOG("GPIO41_U19", in_pd),
|
|
|
|
/*
|
|
* pins 42 is muxed in GPIO
|
|
* configured INPUT PULL DOWN
|
|
*/
|
|
AB8500_MUX_HOG("gpio42_a_1", "gpio"),
|
|
AB8500_PIN_HOG("GPIO42_U2", in_pd),
|
|
};
|
|
|
|
static struct pinctrl_map __initdata ab8505_pinmap[] = {
|
|
/* Sysclkreq2 */
|
|
AB8505_MUX_STATE("sysclkreq2_d_1", "sysclkreq", "regulator.36", PINCTRL_STATE_DEFAULT),
|
|
AB8505_PIN_STATE("GPIO1_N4", in_nopull, "regulator.36", PINCTRL_STATE_DEFAULT),
|
|
/* sysclkreq2 disable, mux in gpio configured in input pulldown */
|
|
AB8505_MUX_STATE("gpio1_a_1", "gpio", "regulator.36", PINCTRL_STATE_SLEEP),
|
|
AB8505_PIN_STATE("GPIO1_N4", in_pd, "regulator.36", PINCTRL_STATE_SLEEP),
|
|
|
|
/* pins 2 is muxed in GPIO, configured in INPUT PULL DOWN */
|
|
AB8505_MUX_HOG("gpio2_a_1", "gpio"),
|
|
AB8505_PIN_HOG("GPIO2_R5", in_pd),
|
|
|
|
/* Sysclkreq4 */
|
|
AB8505_MUX_STATE("sysclkreq4_d_1", "sysclkreq", "regulator.37", PINCTRL_STATE_DEFAULT),
|
|
AB8505_PIN_STATE("GPIO3_P5", in_nopull, "regulator.37", PINCTRL_STATE_DEFAULT),
|
|
/* sysclkreq4 disable, mux in gpio configured in input pulldown */
|
|
AB8505_MUX_STATE("gpio3_a_1", "gpio", "regulator.37", PINCTRL_STATE_SLEEP),
|
|
AB8505_PIN_STATE("GPIO3_P5", in_pd, "regulator.37", PINCTRL_STATE_SLEEP),
|
|
|
|
AB8505_MUX_HOG("gpio10_d_1", "gpio"),
|
|
AB8505_PIN_HOG("GPIO10_B16", in_pd),
|
|
|
|
AB8505_MUX_HOG("gpio11_d_1", "gpio"),
|
|
AB8505_PIN_HOG("GPIO11_B17", in_pd),
|
|
|
|
AB8505_MUX_HOG("gpio13_d_1", "gpio"),
|
|
AB8505_PIN_HOG("GPIO13_D17", in_nopull),
|
|
|
|
AB8505_MUX_HOG("pwmout1_d_1", "pwmout"),
|
|
AB8505_PIN_HOG("GPIO14_C16", in_pd),
|
|
|
|
AB8505_MUX_HOG("adi2_d_1", "adi2"),
|
|
AB8505_PIN_HOG("GPIO17_P2", in_pd),
|
|
AB8505_PIN_HOG("GPIO18_N3", in_pd),
|
|
AB8505_PIN_HOG("GPIO19_T1", in_pd),
|
|
AB8505_PIN_HOG("GPIO20_P3", in_pd),
|
|
|
|
AB8505_MUX_HOG("gpio34_a_1", "gpio"),
|
|
AB8505_PIN_HOG("GPIO34_H14", in_pd),
|
|
|
|
AB8505_MUX_HOG("modsclsda_d_1", "modsclsda"),
|
|
AB8505_PIN_HOG("GPIO40_J15", in_pd),
|
|
AB8505_PIN_HOG("GPIO41_J14", in_pd),
|
|
|
|
AB8505_MUX_HOG("gpio50_d_1", "gpio"),
|
|
AB8505_PIN_HOG("GPIO50_L4", in_nopull),
|
|
|
|
AB8505_MUX_HOG("resethw_d_1", "resethw"),
|
|
AB8505_PIN_HOG("GPIO52_D16", in_pd),
|
|
|
|
AB8505_MUX_HOG("service_d_1", "service"),
|
|
AB8505_PIN_HOG("GPIO53_D15", in_pd),
|
|
};
|
|
|
|
/* Pin control settings */
|
|
static struct pinctrl_map __initdata mop500_family_pinmap[] = {
|
|
/*
|
|
* LCD, set TE0 (using LCD VSI0) and D14 (touch screen interrupt) to
|
|
* pull-up
|
|
* TODO: is this really correct? Snowball doesn't have a LCD.
|
|
*/
|
|
DB8500_MUX_HOG("lcdvsi0_a_1", "lcd"),
|
|
DB8500_PIN_HOG("GPIO68_E1", in_pu),
|
|
DB8500_PIN_HOG("GPIO84_C2", gpio_in_pu),
|
|
/* Mux in LCD data lines 8 thru 11 and LCDA CLK for MCDE TVOUT */
|
|
DB8500_MUX("lcd_d8_d11_a_1", "lcd", "mcde-tvout"),
|
|
DB8500_MUX("lcdaclk_b_1", "lcda", "mcde-tvout"),
|
|
/* Mux in LCD VSI1 and pull it up for MCDE HDMI output */
|
|
DB8500_MUX("lcdvsi1_a_1", "lcd", "0-0070"),
|
|
DB8500_PIN("GPIO69_E2", in_pu, "0-0070"),
|
|
/* LCD VSI1 sleep state */
|
|
DB8500_PIN_SLEEP("GPIO69_E2", slpm_in_wkup_pdis, "0-0070"),
|
|
|
|
/* Mux in USB pins, drive STP high */
|
|
/* USB default state */
|
|
DB8500_MUX("usb_a_1", "usb", "ab8500-usb.0"),
|
|
DB8500_PIN("GPIO257_AE29", out_hi, "ab8500-usb.0"), /* STP */
|
|
/* USB sleep state */
|
|
DB8500_PIN_SLEEP("GPIO256_AF28", slpm_wkup_pdis_en, "ab8500-usb.0"), /* NXT */
|
|
DB8500_PIN_SLEEP("GPIO257_AE29", slpm_out_hi_wkup_pdis, "ab8500-usb.0"), /* STP */
|
|
DB8500_PIN_SLEEP("GPIO258_AD29", slpm_wkup_pdis_en, "ab8500-usb.0"), /* XCLK */
|
|
DB8500_PIN_SLEEP("GPIO259_AC29", slpm_wkup_pdis_en, "ab8500-usb.0"), /* DIR */
|
|
DB8500_PIN_SLEEP("GPIO260_AD28", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT7 */
|
|
DB8500_PIN_SLEEP("GPIO261_AD26", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT6 */
|
|
DB8500_PIN_SLEEP("GPIO262_AE26", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT5 */
|
|
DB8500_PIN_SLEEP("GPIO263_AG29", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT4 */
|
|
DB8500_PIN_SLEEP("GPIO264_AE27", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT3 */
|
|
DB8500_PIN_SLEEP("GPIO265_AD27", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT2 */
|
|
DB8500_PIN_SLEEP("GPIO266_AC28", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT1 */
|
|
DB8500_PIN_SLEEP("GPIO267_AC27", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT0 */
|
|
|
|
/* Mux in SPI2 pins on the "other C1" altfunction */
|
|
DB8500_MUX("spi2_oc1_2", "spi2", "spi2"),
|
|
DB8500_PIN("GPIO216_AG12", gpio_out_hi, "spi2"), /* FRM */
|
|
DB8500_PIN("GPIO218_AH11", in_pd, "spi2"), /* RXD */
|
|
DB8500_PIN("GPIO215_AH13", out_lo, "spi2"), /* TXD */
|
|
DB8500_PIN("GPIO217_AH12", out_lo, "spi2"), /* CLK */
|
|
/* SPI2 idle state */
|
|
DB8500_PIN_IDLE("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */
|
|
DB8500_PIN_IDLE("GPIO215_AH13", slpm_out_lo_wkup_pdis, "spi2"), /* TXD */
|
|
DB8500_PIN_IDLE("GPIO217_AH12", slpm_wkup_pdis, "spi2"), /* CLK */
|
|
/* SPI2 sleep state */
|
|
DB8500_PIN_SLEEP("GPIO216_AG12", slpm_in_wkup_pdis, "spi2"), /* FRM */
|
|
DB8500_PIN_SLEEP("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */
|
|
DB8500_PIN_SLEEP("GPIO215_AH13", slpm_out_lo_wkup_pdis, "spi2"), /* TXD */
|
|
DB8500_PIN_SLEEP("GPIO217_AH12", slpm_wkup_pdis, "spi2"), /* CLK */
|
|
|
|
/* ske default state */
|
|
DB8500_MUX("kp_a_2", "kp", "nmk-ske-keypad"),
|
|
DB8500_PIN("GPIO153_B17", in_pd, "nmk-ske-keypad"), /* I7 */
|
|
DB8500_PIN("GPIO154_C16", in_pd, "nmk-ske-keypad"), /* I6 */
|
|
DB8500_PIN("GPIO155_C19", in_pd, "nmk-ske-keypad"), /* I5 */
|
|
DB8500_PIN("GPIO156_C17", in_pd, "nmk-ske-keypad"), /* I4 */
|
|
DB8500_PIN("GPIO161_D21", in_pd, "nmk-ske-keypad"), /* I3 */
|
|
DB8500_PIN("GPIO162_D20", in_pd, "nmk-ske-keypad"), /* I2 */
|
|
DB8500_PIN("GPIO163_C20", in_pd, "nmk-ske-keypad"), /* I1 */
|
|
DB8500_PIN("GPIO164_B21", in_pd, "nmk-ske-keypad"), /* I0 */
|
|
DB8500_PIN("GPIO157_A18", out_lo, "nmk-ske-keypad"), /* O7 */
|
|
DB8500_PIN("GPIO158_C18", out_lo, "nmk-ske-keypad"), /* O6 */
|
|
DB8500_PIN("GPIO159_B19", out_lo, "nmk-ske-keypad"), /* O5 */
|
|
DB8500_PIN("GPIO160_B20", out_lo, "nmk-ske-keypad"), /* O4 */
|
|
DB8500_PIN("GPIO165_C21", out_lo, "nmk-ske-keypad"), /* O3 */
|
|
DB8500_PIN("GPIO166_A22", out_lo, "nmk-ske-keypad"), /* O2 */
|
|
DB8500_PIN("GPIO167_B24", out_lo, "nmk-ske-keypad"), /* O1 */
|
|
DB8500_PIN("GPIO168_C22", out_lo, "nmk-ske-keypad"), /* O0 */
|
|
/* ske sleep state */
|
|
DB8500_PIN_SLEEP("GPIO153_B17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I7 */
|
|
DB8500_PIN_SLEEP("GPIO154_C16", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I6 */
|
|
DB8500_PIN_SLEEP("GPIO155_C19", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I5 */
|
|
DB8500_PIN_SLEEP("GPIO156_C17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I4 */
|
|
DB8500_PIN_SLEEP("GPIO161_D21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I3 */
|
|
DB8500_PIN_SLEEP("GPIO162_D20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I2 */
|
|
DB8500_PIN_SLEEP("GPIO163_C20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I1 */
|
|
DB8500_PIN_SLEEP("GPIO164_B21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I0 */
|
|
DB8500_PIN_SLEEP("GPIO157_A18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O7 */
|
|
DB8500_PIN_SLEEP("GPIO158_C18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O6 */
|
|
DB8500_PIN_SLEEP("GPIO159_B19", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O5 */
|
|
DB8500_PIN_SLEEP("GPIO160_B20", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O4 */
|
|
DB8500_PIN_SLEEP("GPIO165_C21", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O3 */
|
|
DB8500_PIN_SLEEP("GPIO166_A22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O2 */
|
|
DB8500_PIN_SLEEP("GPIO167_B24", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O1 */
|
|
DB8500_PIN_SLEEP("GPIO168_C22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O0 */
|
|
|
|
/* STM APE pins states */
|
|
DB8500_MUX_STATE("stmape_c_1", "stmape",
|
|
"stm", "ape_mipi34"),
|
|
DB8500_PIN_STATE("GPIO70_G5", in_nopull,
|
|
"stm", "ape_mipi34"), /* clk */
|
|
DB8500_PIN_STATE("GPIO71_G4", in_nopull,
|
|
"stm", "ape_mipi34"), /* dat3 */
|
|
DB8500_PIN_STATE("GPIO72_H4", in_nopull,
|
|
"stm", "ape_mipi34"), /* dat2 */
|
|
DB8500_PIN_STATE("GPIO73_H3", in_nopull,
|
|
"stm", "ape_mipi34"), /* dat1 */
|
|
DB8500_PIN_STATE("GPIO74_J3", in_nopull,
|
|
"stm", "ape_mipi34"), /* dat0 */
|
|
|
|
DB8500_PIN_STATE("GPIO70_G5", slpm_out_lo_pdis,
|
|
"stm", "ape_mipi34_sleep"), /* clk */
|
|
DB8500_PIN_STATE("GPIO71_G4", slpm_out_lo_pdis,
|
|
"stm", "ape_mipi34_sleep"), /* dat3 */
|
|
DB8500_PIN_STATE("GPIO72_H4", slpm_out_lo_pdis,
|
|
"stm", "ape_mipi34_sleep"), /* dat2 */
|
|
DB8500_PIN_STATE("GPIO73_H3", slpm_out_lo_pdis,
|
|
"stm", "ape_mipi34_sleep"), /* dat1 */
|
|
DB8500_PIN_STATE("GPIO74_J3", slpm_out_lo_pdis,
|
|
"stm", "ape_mipi34_sleep"), /* dat0 */
|
|
|
|
DB8500_MUX_STATE("stmape_oc1_1", "stmape",
|
|
"stm", "ape_microsd"),
|
|
DB8500_PIN_STATE("GPIO23_AA4", in_nopull,
|
|
"stm", "ape_microsd"), /* clk */
|
|
DB8500_PIN_STATE("GPIO25_Y4", in_nopull,
|
|
"stm", "ape_microsd"), /* dat0 */
|
|
DB8500_PIN_STATE("GPIO26_Y2", in_nopull,
|
|
"stm", "ape_microsd"), /* dat1 */
|
|
DB8500_PIN_STATE("GPIO27_AA2", in_nopull,
|
|
"stm", "ape_microsd"), /* dat2 */
|
|
DB8500_PIN_STATE("GPIO28_AA1", in_nopull,
|
|
"stm", "ape_microsd"), /* dat3 */
|
|
|
|
DB8500_PIN_STATE("GPIO23_AA4", slpm_out_lo_wkup_pdis,
|
|
"stm", "ape_microsd_sleep"), /* clk */
|
|
DB8500_PIN_STATE("GPIO25_Y4", slpm_in_wkup_pdis,
|
|
"stm", "ape_microsd_sleep"), /* dat0 */
|
|
DB8500_PIN_STATE("GPIO26_Y2", slpm_in_wkup_pdis,
|
|
"stm", "ape_microsd_sleep"), /* dat1 */
|
|
DB8500_PIN_STATE("GPIO27_AA2", slpm_in_wkup_pdis,
|
|
"stm", "ape_microsd_sleep"), /* dat2 */
|
|
DB8500_PIN_STATE("GPIO28_AA1", slpm_in_wkup_pdis,
|
|
"stm", "ape_microsd_sleep"), /* dat3 */
|
|
|
|
/* STM Modem pins states */
|
|
DB8500_MUX_STATE("stmmod_oc3_2", "stmmod",
|
|
"stm", "mod_mipi34"),
|
|
DB8500_MUX_STATE("uartmodrx_oc3_1", "uartmod",
|
|
"stm", "mod_mipi34"),
|
|
DB8500_MUX_STATE("uartmodtx_oc3_1", "uartmod",
|
|
"stm", "mod_mipi34"),
|
|
DB8500_PIN_STATE("GPIO70_G5", in_nopull,
|
|
"stm", "mod_mipi34"), /* clk */
|
|
DB8500_PIN_STATE("GPIO71_G4", in_nopull,
|
|
"stm", "mod_mipi34"), /* dat3 */
|
|
DB8500_PIN_STATE("GPIO72_H4", in_nopull,
|
|
"stm", "mod_mipi34"), /* dat2 */
|
|
DB8500_PIN_STATE("GPIO73_H3", in_nopull,
|
|
"stm", "mod_mipi34"), /* dat1 */
|
|
DB8500_PIN_STATE("GPIO74_J3", in_nopull,
|
|
"stm", "mod_mipi34"), /* dat0 */
|
|
DB8500_PIN_STATE("GPIO75_H2", in_pu,
|
|
"stm", "mod_mipi34"), /* uartmod rx */
|
|
DB8500_PIN_STATE("GPIO76_J2", out_lo,
|
|
"stm", "mod_mipi34"), /* uartmod tx */
|
|
|
|
DB8500_PIN_STATE("GPIO70_G5", slpm_out_lo_pdis,
|
|
"stm", "mod_mipi34_sleep"), /* clk */
|
|
DB8500_PIN_STATE("GPIO71_G4", slpm_out_lo_pdis,
|
|
"stm", "mod_mipi34_sleep"), /* dat3 */
|
|
DB8500_PIN_STATE("GPIO72_H4", slpm_out_lo_pdis,
|
|
"stm", "mod_mipi34_sleep"), /* dat2 */
|
|
DB8500_PIN_STATE("GPIO73_H3", slpm_out_lo_pdis,
|
|
"stm", "mod_mipi34_sleep"), /* dat1 */
|
|
DB8500_PIN_STATE("GPIO74_J3", slpm_out_lo_pdis,
|
|
"stm", "mod_mipi34_sleep"), /* dat0 */
|
|
DB8500_PIN_STATE("GPIO75_H2", slpm_in_wkup_pdis,
|
|
"stm", "mod_mipi34_sleep"), /* uartmod rx */
|
|
DB8500_PIN_STATE("GPIO76_J2", slpm_out_lo_wkup_pdis,
|
|
"stm", "mod_mipi34_sleep"), /* uartmod tx */
|
|
|
|
DB8500_MUX_STATE("stmmod_b_1", "stmmod",
|
|
"stm", "mod_microsd"),
|
|
DB8500_MUX_STATE("uartmodrx_oc3_1", "uartmod",
|
|
"stm", "mod_microsd"),
|
|
DB8500_MUX_STATE("uartmodtx_oc3_1", "uartmod",
|
|
"stm", "mod_microsd"),
|
|
DB8500_PIN_STATE("GPIO23_AA4", in_nopull,
|
|
"stm", "mod_microsd"), /* clk */
|
|
DB8500_PIN_STATE("GPIO25_Y4", in_nopull,
|
|
"stm", "mod_microsd"), /* dat0 */
|
|
DB8500_PIN_STATE("GPIO26_Y2", in_nopull,
|
|
"stm", "mod_microsd"), /* dat1 */
|
|
DB8500_PIN_STATE("GPIO27_AA2", in_nopull,
|
|
"stm", "mod_microsd"), /* dat2 */
|
|
DB8500_PIN_STATE("GPIO28_AA1", in_nopull,
|
|
"stm", "mod_microsd"), /* dat3 */
|
|
DB8500_PIN_STATE("GPIO75_H2", in_pu,
|
|
"stm", "mod_microsd"), /* uartmod rx */
|
|
DB8500_PIN_STATE("GPIO76_J2", out_lo,
|
|
"stm", "mod_microsd"), /* uartmod tx */
|
|
|
|
DB8500_PIN_STATE("GPIO23_AA4", slpm_out_lo_wkup_pdis,
|
|
"stm", "mod_microsd_sleep"), /* clk */
|
|
DB8500_PIN_STATE("GPIO25_Y4", slpm_in_wkup_pdis,
|
|
"stm", "mod_microsd_sleep"), /* dat0 */
|
|
DB8500_PIN_STATE("GPIO26_Y2", slpm_in_wkup_pdis,
|
|
"stm", "mod_microsd_sleep"), /* dat1 */
|
|
DB8500_PIN_STATE("GPIO27_AA2", slpm_in_wkup_pdis,
|
|
"stm", "mod_microsd_sleep"), /* dat2 */
|
|
DB8500_PIN_STATE("GPIO28_AA1", slpm_in_wkup_pdis,
|
|
"stm", "mod_microsd_sleep"), /* dat3 */
|
|
DB8500_PIN_STATE("GPIO75_H2", slpm_in_wkup_pdis,
|
|
"stm", "mod_microsd_sleep"), /* uartmod rx */
|
|
DB8500_PIN_STATE("GPIO76_J2", slpm_out_lo_wkup_pdis,
|
|
"stm", "mod_microsd_sleep"), /* uartmod tx */
|
|
|
|
/* STM dual Modem/APE pins state */
|
|
DB8500_MUX_STATE("stmmod_oc3_2", "stmmod",
|
|
"stm", "mod_mipi34_ape_mipi60"),
|
|
DB8500_MUX_STATE("stmape_c_2", "stmape",
|
|
"stm", "mod_mipi34_ape_mipi60"),
|
|
DB8500_MUX_STATE("uartmodrx_oc3_1", "uartmod",
|
|
"stm", "mod_mipi34_ape_mipi60"),
|
|
DB8500_MUX_STATE("uartmodtx_oc3_1", "uartmod",
|
|
"stm", "mod_mipi34_ape_mipi60"),
|
|
DB8500_PIN_STATE("GPIO70_G5", in_nopull,
|
|
"stm", "mod_mipi34_ape_mipi60"), /* clk */
|
|
DB8500_PIN_STATE("GPIO71_G4", in_nopull,
|
|
"stm", "mod_mipi34_ape_mipi60"), /* dat3 */
|
|
DB8500_PIN_STATE("GPIO72_H4", in_nopull,
|
|
"stm", "mod_mipi34_ape_mipi60"), /* dat2 */
|
|
DB8500_PIN_STATE("GPIO73_H3", in_nopull,
|
|
"stm", "mod_mipi34_ape_mipi60"), /* dat1 */
|
|
DB8500_PIN_STATE("GPIO74_J3", in_nopull,
|
|
"stm", "mod_mipi34_ape_mipi60"), /* dat0 */
|
|
DB8500_PIN_STATE("GPIO75_H2", in_pu,
|
|
"stm", "mod_mipi34_ape_mipi60"), /* uartmod rx */
|
|
DB8500_PIN_STATE("GPIO76_J2", out_lo,
|
|
"stm", "mod_mipi34_ape_mipi60"), /* uartmod tx */
|
|
DB8500_PIN_STATE("GPIO155_C19", in_nopull,
|
|
"stm", "mod_mipi34_ape_mipi60"), /* clk */
|
|
DB8500_PIN_STATE("GPIO156_C17", in_nopull,
|
|
"stm", "mod_mipi34_ape_mipi60"), /* dat3 */
|
|
DB8500_PIN_STATE("GPIO157_A18", in_nopull,
|
|
"stm", "mod_mipi34_ape_mipi60"), /* dat2 */
|
|
DB8500_PIN_STATE("GPIO158_C18", in_nopull,
|
|
"stm", "mod_mipi34_ape_mipi60"), /* dat1 */
|
|
DB8500_PIN_STATE("GPIO159_B19", in_nopull,
|
|
"stm", "mod_mipi34_ape_mipi60"), /* dat0 */
|
|
|
|
DB8500_PIN_STATE("GPIO70_G5", slpm_out_lo_pdis,
|
|
"stm", "mod_mipi34_ape_mipi60_sleep"), /* clk */
|
|
DB8500_PIN_STATE("GPIO71_G4", slpm_out_lo_pdis,
|
|
"stm", "mod_mipi34_ape_mipi60_sleep"), /* dat3 */
|
|
DB8500_PIN_STATE("GPIO72_H4", slpm_out_lo_pdis,
|
|
"stm", "mod_mipi34_ape_mipi60_sleep"), /* dat2 */
|
|
DB8500_PIN_STATE("GPIO73_H3", slpm_out_lo_pdis,
|
|
"stm", "mod_mipi34_ape_mipi60_sleep"), /* dat1 */
|
|
DB8500_PIN_STATE("GPIO74_J3", slpm_out_lo_pdis,
|
|
"stm", "mod_mipi34_ape_mipi60_sleep"), /* dat0 */
|
|
DB8500_PIN_STATE("GPIO75_H2", slpm_in_wkup_pdis,
|
|
"stm", "mod_mipi34_ape_mipi60_sleep"), /* uartmod rx */
|
|
DB8500_PIN_STATE("GPIO76_J2", slpm_out_lo_wkup_pdis,
|
|
"stm", "mod_mipi34_ape_mipi60_sleep"), /* uartmod tx */
|
|
DB8500_PIN_STATE("GPIO155_C19", slpm_in_wkup_pdis,
|
|
"stm", "mod_mipi34_ape_mipi60_sleep"), /* clk */
|
|
DB8500_PIN_STATE("GPIO156_C17", slpm_in_wkup_pdis,
|
|
"stm", "mod_mipi34_ape_mipi60_sleep"), /* dat3 */
|
|
DB8500_PIN_STATE("GPIO157_A18", slpm_in_wkup_pdis,
|
|
"stm", "mod_mipi34_ape_mipi60_sleep"), /* dat2 */
|
|
DB8500_PIN_STATE("GPIO158_C18", slpm_in_wkup_pdis,
|
|
"stm", "mod_mipi34_ape_mipi60_sleep"), /* dat1 */
|
|
DB8500_PIN_STATE("GPIO159_B19", slpm_in_wkup_pdis,
|
|
"stm", "mod_mipi34_ape_mipi60_sleep"), /* dat0 */
|
|
};
|
|
|
|
/*
|
|
* These are specifically for the MOP500 and HREFP (pre-v60) version of the
|
|
* board, which utilized a TC35892 GPIO expander instead of using a lot of
|
|
* on-chip pins as the HREFv60 and later does.
|
|
*/
|
|
static struct pinctrl_map __initdata mop500_pinmap[] = {
|
|
/* Mux in SSP0, pull down RXD pin */
|
|
DB8500_MUX_HOG("ssp0_a_1", "ssp0"),
|
|
DB8500_PIN_HOG("GPIO145_C13", pd),
|
|
/*
|
|
* XENON Flashgun on image processor GPIO (controlled from image
|
|
* processor firmware), mux in these image processor GPIO lines 0
|
|
* (XENON_FLASH_ID) and 1 (XENON_READY) on altfunction C and pull up
|
|
* the pins.
|
|
*/
|
|
DB8500_MUX_HOG("ipgpio0_c_1", "ipgpio"),
|
|
DB8500_MUX_HOG("ipgpio1_c_1", "ipgpio"),
|
|
DB8500_PIN_HOG("GPIO6_AF6", in_pu),
|
|
DB8500_PIN_HOG("GPIO7_AG5", in_pu),
|
|
/*
|
|
* Runtime stuff: make it possible to mux in the SKE keypad
|
|
* and bias the pins
|
|
*/
|
|
/* ske default state */
|
|
DB8500_MUX("kp_a_2", "kp", "nmk-ske-keypad"),
|
|
DB8500_PIN("GPIO153_B17", in_pu, "nmk-ske-keypad"), /* I7 */
|
|
DB8500_PIN("GPIO154_C16", in_pu, "nmk-ske-keypad"), /* I6 */
|
|
DB8500_PIN("GPIO155_C19", in_pu, "nmk-ske-keypad"), /* I5 */
|
|
DB8500_PIN("GPIO156_C17", in_pu, "nmk-ske-keypad"), /* I4 */
|
|
DB8500_PIN("GPIO161_D21", in_pu, "nmk-ske-keypad"), /* I3 */
|
|
DB8500_PIN("GPIO162_D20", in_pu, "nmk-ske-keypad"), /* I2 */
|
|
DB8500_PIN("GPIO163_C20", in_pu, "nmk-ske-keypad"), /* I1 */
|
|
DB8500_PIN("GPIO164_B21", in_pu, "nmk-ske-keypad"), /* I0 */
|
|
DB8500_PIN("GPIO157_A18", out_lo, "nmk-ske-keypad"), /* O7 */
|
|
DB8500_PIN("GPIO158_C18", out_lo, "nmk-ske-keypad"), /* O6 */
|
|
DB8500_PIN("GPIO159_B19", out_lo, "nmk-ske-keypad"), /* O5 */
|
|
DB8500_PIN("GPIO160_B20", out_lo, "nmk-ske-keypad"), /* O4 */
|
|
DB8500_PIN("GPIO165_C21", out_lo, "nmk-ske-keypad"), /* O3 */
|
|
DB8500_PIN("GPIO166_A22", out_lo, "nmk-ske-keypad"), /* O2 */
|
|
DB8500_PIN("GPIO167_B24", out_lo, "nmk-ske-keypad"), /* O1 */
|
|
DB8500_PIN("GPIO168_C22", out_lo, "nmk-ske-keypad"), /* O0 */
|
|
/* ske sleep state */
|
|
DB8500_PIN_SLEEP("GPIO153_B17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I7 */
|
|
DB8500_PIN_SLEEP("GPIO154_C16", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I6 */
|
|
DB8500_PIN_SLEEP("GPIO155_C19", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I5 */
|
|
DB8500_PIN_SLEEP("GPIO156_C17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I4 */
|
|
DB8500_PIN_SLEEP("GPIO161_D21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I3 */
|
|
DB8500_PIN_SLEEP("GPIO162_D20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I2 */
|
|
DB8500_PIN_SLEEP("GPIO163_C20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I1 */
|
|
DB8500_PIN_SLEEP("GPIO164_B21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I0 */
|
|
DB8500_PIN_SLEEP("GPIO157_A18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O7 */
|
|
DB8500_PIN_SLEEP("GPIO158_C18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O6 */
|
|
DB8500_PIN_SLEEP("GPIO159_B19", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O5 */
|
|
DB8500_PIN_SLEEP("GPIO160_B20", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O4 */
|
|
DB8500_PIN_SLEEP("GPIO165_C21", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O3 */
|
|
DB8500_PIN_SLEEP("GPIO166_A22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O2 */
|
|
DB8500_PIN_SLEEP("GPIO167_B24", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O1 */
|
|
DB8500_PIN_SLEEP("GPIO168_C22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O0 */
|
|
};
|
|
|
|
/*
|
|
* The HREFv60 series of platforms is using available pins on the DB8500
|
|
* insteaf of the Toshiba I2C GPIO expander, reusing some pins like the SSP0
|
|
* and SSP1 ports (previously connected to the AB8500) as generic GPIO lines.
|
|
*/
|
|
static struct pinctrl_map __initdata hrefv60_pinmap[] = {
|
|
/* Drive WLAN_ENA low */
|
|
DB8500_PIN_HOG("GPIO85_D5", gpio_out_lo), /* WLAN_ENA */
|
|
/*
|
|
* XENON Flashgun on image processor GPIO (controlled from image
|
|
* processor firmware), mux in these image processor GPIO lines 0
|
|
* (XENON_FLASH_ID), 1 (XENON_READY) and there is an assistant
|
|
* LED on IP GPIO 4 (XENON_EN2) on altfunction C, that need bias
|
|
* from GPIO21 so pull up 0, 1 and drive 4 and GPIO21 low as output.
|
|
*/
|
|
DB8500_MUX_HOG("ipgpio0_c_1", "ipgpio"),
|
|
DB8500_MUX_HOG("ipgpio1_c_1", "ipgpio"),
|
|
DB8500_MUX_HOG("ipgpio4_c_1", "ipgpio"),
|
|
DB8500_PIN_HOG("GPIO6_AF6", in_pu), /* XENON_FLASH_ID */
|
|
DB8500_PIN_HOG("GPIO7_AG5", in_pu), /* XENON_READY */
|
|
DB8500_PIN_HOG("GPIO21_AB3", gpio_out_lo), /* XENON_EN1 */
|
|
DB8500_PIN_HOG("GPIO64_F3", out_lo), /* XENON_EN2 */
|
|
/* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */
|
|
DB8500_PIN_HOG("GPIO31_V3", gpio_in_pu), /* EN1 */
|
|
DB8500_PIN_HOG("GPIO32_V2", gpio_in_pd), /* DRDY */
|
|
/*
|
|
* Display Interface 1 uses GPIO 65 for RST (reset).
|
|
* Display Interface 2 uses GPIO 66 for RST (reset).
|
|
* Drive DISP1 reset high (not reset), driver DISP2 reset low (reset)
|
|
*/
|
|
DB8500_PIN_HOG("GPIO65_F1", gpio_out_hi), /* DISP1 NO RST */
|
|
DB8500_PIN_HOG("GPIO66_G3", gpio_out_lo), /* DISP2 RST */
|
|
/*
|
|
* Touch screen uses GPIO 143 for RST1, GPIO 146 for RST2 and
|
|
* GPIO 67 for interrupts. Pull-up the IRQ line and drive both
|
|
* reset signals low.
|
|
*/
|
|
DB8500_PIN_HOG("GPIO143_D12", gpio_out_lo), /* TOUCH_RST1 */
|
|
DB8500_PIN_HOG("GPIO67_G2", gpio_in_pu), /* TOUCH_INT2 */
|
|
DB8500_PIN_HOG("GPIO146_D13", gpio_out_lo), /* TOUCH_RST2 */
|
|
/*
|
|
* Drive D19-D23 for the ETM PTM trace interface low,
|
|
* (presumably pins are unconnected therefore grounded here,
|
|
* the "other alt C1" setting enables these pins)
|
|
*/
|
|
DB8500_PIN_HOG("GPIO70_G5", gpio_out_lo),
|
|
DB8500_PIN_HOG("GPIO71_G4", gpio_out_lo),
|
|
DB8500_PIN_HOG("GPIO72_H4", gpio_out_lo),
|
|
DB8500_PIN_HOG("GPIO73_H3", gpio_out_lo),
|
|
DB8500_PIN_HOG("GPIO74_J3", gpio_out_lo),
|
|
/* NAHJ CTRL on GPIO 76 to low, CTRL_INV on GPIO216 to high */
|
|
DB8500_PIN_HOG("GPIO76_J2", gpio_out_lo), /* CTRL */
|
|
DB8500_PIN_HOG("GPIO216_AG12", gpio_out_hi), /* CTRL_INV */
|
|
/* NFC ENA and RESET to low, pulldown IRQ line */
|
|
DB8500_PIN_HOG("GPIO77_H1", gpio_out_lo), /* NFC_ENA */
|
|
DB8500_PIN_HOG("GPIO144_B13", gpio_in_pd), /* NFC_IRQ */
|
|
DB8500_PIN_HOG("GPIO142_C11", gpio_out_lo), /* NFC_RESET */
|
|
/*
|
|
* SKE keyboard partly on alt A and partly on "Other alt C1"
|
|
* Driver KP_O1,2,3,6,7 low and pull up KP_I 0,2,3 for three
|
|
* rows of 6 keys, then pull up force sensing interrup and
|
|
* drive reset and force sensing WU low.
|
|
*/
|
|
DB8500_MUX_HOG("kp_a_1", "kp"),
|
|
DB8500_MUX_HOG("kp_oc1_1", "kp"),
|
|
DB8500_PIN_HOG("GPIO90_A3", out_lo), /* KP_O1 */
|
|
DB8500_PIN_HOG("GPIO87_B3", out_lo), /* KP_O2 */
|
|
DB8500_PIN_HOG("GPIO86_C6", out_lo), /* KP_O3 */
|
|
DB8500_PIN_HOG("GPIO96_D8", out_lo), /* KP_O6 */
|
|
DB8500_PIN_HOG("GPIO94_D7", out_lo), /* KP_O7 */
|
|
DB8500_PIN_HOG("GPIO93_B7", in_pu), /* KP_I0 */
|
|
DB8500_PIN_HOG("GPIO89_E6", in_pu), /* KP_I2 */
|
|
DB8500_PIN_HOG("GPIO88_C4", in_pu), /* KP_I3 */
|
|
DB8500_PIN_HOG("GPIO91_B6", gpio_in_pu), /* FORCE_SENSING_INT */
|
|
DB8500_PIN_HOG("GPIO92_D6", gpio_out_lo), /* FORCE_SENSING_RST */
|
|
DB8500_PIN_HOG("GPIO97_D9", gpio_out_lo), /* FORCE_SENSING_WU */
|
|
/* DiPro Sensor interrupt */
|
|
DB8500_PIN_HOG("GPIO139_C9", gpio_in_pu), /* DIPRO_INT */
|
|
/* Audio Amplifier HF enable */
|
|
DB8500_PIN_HOG("GPIO149_B14", gpio_out_hi), /* VAUDIO_HF_EN, enable MAX8968 */
|
|
/* GBF interface, pull low to reset state */
|
|
DB8500_PIN_HOG("GPIO171_D23", gpio_out_lo), /* GBF_ENA_RESET */
|
|
/* MSP : HDTV INTERFACE GPIO line */
|
|
DB8500_PIN_HOG("GPIO192_AJ27", gpio_in_pd),
|
|
/* Accelerometer interrupt lines */
|
|
DB8500_PIN_HOG("GPIO82_C1", gpio_in_pu), /* ACC_INT1 */
|
|
DB8500_PIN_HOG("GPIO83_D3", gpio_in_pu), /* ACC_INT2 */
|
|
/*
|
|
* Runtime stuff
|
|
* Pull up/down of some sensor GPIO pins, for proximity, HAL sensor
|
|
* etc.
|
|
*/
|
|
DB8500_PIN("GPIO217_AH12", gpio_in_pu_slpm_gpio_nopull, "gpio-keys.0"),
|
|
DB8500_PIN("GPIO145_C13", gpio_in_pd_slpm_gpio_nopull, "gpio-keys.0"),
|
|
DB8500_PIN("GPIO139_C9", gpio_in_pu_slpm_gpio_nopull, "gpio-keys.0"),
|
|
};
|
|
|
|
static struct pinctrl_map __initdata u9500_pinmap[] = {
|
|
/* WLAN_IRQ line */
|
|
DB8500_PIN_HOG("GPIO144_B13", gpio_in_pu),
|
|
/* HSI */
|
|
DB8500_MUX_HOG("hsir_a_1", "hsi"),
|
|
DB8500_MUX_HOG("hsit_a_2", "hsi"),
|
|
DB8500_PIN_HOG("GPIO219_AG10", in_pd), /* RX FLA0 */
|
|
DB8500_PIN_HOG("GPIO220_AH10", in_pd), /* RX DAT0 */
|
|
DB8500_PIN_HOG("GPIO221_AJ11", out_lo), /* RX RDY0 */
|
|
DB8500_PIN_HOG("GPIO222_AJ9", out_lo), /* TX FLA0 */
|
|
DB8500_PIN_HOG("GPIO223_AH9", out_lo), /* TX DAT0 */
|
|
DB8500_PIN_HOG("GPIO224_AG9", in_pd), /* TX RDY0 */
|
|
DB8500_PIN_HOG("GPIO225_AG8", in_pd), /* CAWAKE0 */
|
|
DB8500_PIN_HOG("GPIO226_AF8", gpio_out_hi), /* ACWAKE0 */
|
|
};
|
|
|
|
static struct pinctrl_map __initdata u8500_pinmap[] = {
|
|
DB8500_PIN_HOG("GPIO226_AF8", gpio_out_lo), /* WLAN_PMU_EN */
|
|
DB8500_PIN_HOG("GPIO4_AH6", gpio_in_pu), /* WLAN_IRQ */
|
|
};
|
|
|
|
static struct pinctrl_map __initdata snowball_pinmap[] = {
|
|
/* Mux in SSP0 connected to AB8500, pull down RXD pin */
|
|
DB8500_MUX_HOG("ssp0_a_1", "ssp0"),
|
|
DB8500_PIN_HOG("GPIO145_C13", pd),
|
|
/* Mux in "SM" which is used for the SMSC911x Ethernet adapter */
|
|
DB8500_MUX_HOG("sm_b_1", "sm"),
|
|
/* User LED */
|
|
DB8500_PIN_HOG("GPIO142_C11", gpio_out_hi),
|
|
/* Drive RSTn_LAN high */
|
|
DB8500_PIN_HOG("GPIO141_C12", gpio_out_hi),
|
|
/* Accelerometer/Magnetometer */
|
|
DB8500_PIN_HOG("GPIO163_C20", gpio_in_pu), /* ACCEL_IRQ1 */
|
|
DB8500_PIN_HOG("GPIO164_B21", gpio_in_pu), /* ACCEL_IRQ2 */
|
|
DB8500_PIN_HOG("GPIO165_C21", gpio_in_pu), /* MAG_DRDY */
|
|
/* WLAN/GBF */
|
|
DB8500_PIN_HOG("GPIO161_D21", gpio_out_lo), /* WLAN_PMU_EN */
|
|
DB8500_PIN_HOG("GPIO171_D23", gpio_out_hi), /* GBF_ENA */
|
|
DB8500_PIN_HOG("GPIO215_AH13", gpio_out_lo), /* WLAN_ENA */
|
|
DB8500_PIN_HOG("GPIO216_AG12", gpio_in_pu), /* WLAN_IRQ */
|
|
};
|
|
|
|
/*
|
|
* passing "pinsfor=" in kernel cmdline allows for custom
|
|
* configuration of GPIOs on u8500 derived boards.
|
|
*/
|
|
static int __init early_pinsfor(char *p)
|
|
{
|
|
pinsfor = PINS_FOR_DEFAULT;
|
|
|
|
if (strcmp(p, "u9500-21") == 0)
|
|
pinsfor = PINS_FOR_U9500;
|
|
|
|
return 0;
|
|
}
|
|
early_param("pinsfor", early_pinsfor);
|
|
|
|
int pins_for_u9500(void)
|
|
{
|
|
if (pinsfor == PINS_FOR_U9500)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __init mop500_href_family_pinmaps_init(void)
|
|
{
|
|
switch (pinsfor) {
|
|
case PINS_FOR_U9500:
|
|
pinctrl_register_mappings(u9500_pinmap,
|
|
ARRAY_SIZE(u9500_pinmap));
|
|
break;
|
|
case PINS_FOR_DEFAULT:
|
|
pinctrl_register_mappings(u8500_pinmap,
|
|
ARRAY_SIZE(u8500_pinmap));
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
void __init mop500_pinmaps_init(void)
|
|
{
|
|
pinctrl_register_mappings(mop500_family_pinmap,
|
|
ARRAY_SIZE(mop500_family_pinmap));
|
|
pinctrl_register_mappings(mop500_pinmap,
|
|
ARRAY_SIZE(mop500_pinmap));
|
|
mop500_href_family_pinmaps_init();
|
|
if (machine_is_u8520())
|
|
pinctrl_register_mappings(ab8505_pinmap,
|
|
ARRAY_SIZE(ab8505_pinmap));
|
|
else
|
|
pinctrl_register_mappings(ab8500_pinmap,
|
|
ARRAY_SIZE(ab8500_pinmap));
|
|
}
|
|
|
|
void __init snowball_pinmaps_init(void)
|
|
{
|
|
pinctrl_register_mappings(mop500_family_pinmap,
|
|
ARRAY_SIZE(mop500_family_pinmap));
|
|
pinctrl_register_mappings(snowball_pinmap,
|
|
ARRAY_SIZE(snowball_pinmap));
|
|
pinctrl_register_mappings(u8500_pinmap,
|
|
ARRAY_SIZE(u8500_pinmap));
|
|
pinctrl_register_mappings(ab8500_pinmap,
|
|
ARRAY_SIZE(ab8500_pinmap));
|
|
}
|
|
|
|
void __init hrefv60_pinmaps_init(void)
|
|
{
|
|
pinctrl_register_mappings(mop500_family_pinmap,
|
|
ARRAY_SIZE(mop500_family_pinmap));
|
|
pinctrl_register_mappings(hrefv60_pinmap,
|
|
ARRAY_SIZE(hrefv60_pinmap));
|
|
mop500_href_family_pinmaps_init();
|
|
pinctrl_register_mappings(ab8500_pinmap,
|
|
ARRAY_SIZE(ab8500_pinmap));
|
|
}
|