forked from Minki/linux
52638f71fc
Resetting the switch is something the driver does, not the framework. So move the parsing of this property into the driver. There are no in kernel users of this property, so moving it does not break anything. There is however a board which will make use of this property making its way into the kernel. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
36 lines
1.1 KiB
Plaintext
36 lines
1.1 KiB
Plaintext
Marvell DSA Switch Device Tree Bindings
|
|
---------------------------------------
|
|
|
|
WARNING: This binding is currently unstable. Do not program it into a
|
|
FLASH never to be changed again. Once this binding is stable, this
|
|
warning will be removed.
|
|
|
|
If you need a stable binding, use the old dsa.txt binding.
|
|
|
|
Marvell Switches are MDIO devices. The following properties should be
|
|
placed as a child node of an mdio device.
|
|
|
|
The properties described here are those specific to Marvell devices.
|
|
Additional required and optional properties can be found in dsa.txt.
|
|
|
|
Required properties:
|
|
- compatible : Should be one of "marvell,mv88e6085",
|
|
- reg : Address on the MII bus for the switch.
|
|
|
|
Optional properties:
|
|
|
|
- reset-gpios : Should be a gpio specifier for a reset line
|
|
|
|
Example:
|
|
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
switch0: switch@0 {
|
|
compatible = "marvell,mv88e6085";
|
|
reg = <0>;
|
|
reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|