forked from Minki/linux
78fd1a0fa9
The lp873x series of PMICs have a bunch of regulators and a couple of GPO(General Purpose Outputs). Add information for the MFD and regulator drivers. Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
60 lines
1.5 KiB
Plaintext
60 lines
1.5 KiB
Plaintext
TI LP873X PMIC MFD driver
|
|
|
|
Required properties:
|
|
- compatible: "ti,lp8732", "ti,lp8733"
|
|
- reg: I2C slave address.
|
|
- gpio-controller: Marks the device node as a GPIO Controller.
|
|
- #gpio-cells: Should be two. The first cell is the pin number and
|
|
the second cell is used to specify flags.
|
|
See ../gpio/gpio.txt for more information.
|
|
- regulators: List of child nodes that specify the regulator
|
|
initialization data.
|
|
Example:
|
|
|
|
pmic: lp8733@60 {
|
|
compatible = "ti,lp8733";
|
|
reg = <0x60>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
regulators {
|
|
lp8733_buck0: buck0 {
|
|
regulator-name = "lp8733-buck0";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-min-microamp = <1500000>;
|
|
regulator-max-microamp = <4000000>;
|
|
regulator-ramp-delay = <10000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
lp8733_buck1: buck1 {
|
|
regulator-name = "lp8733-buck1";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-min-microamp = <1500000>;
|
|
regulator-max-microamp = <4000000>;
|
|
regulator-ramp-delay = <10000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
lp8733_ldo0: ldo0 {
|
|
regulator-name = "lp8733-ldo0";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
lp8733_ldo1: ldo1 {
|
|
regulator-name = "lp8733-ldo1";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
};
|
|
};
|