forked from Minki/linux
9468613b2b
The PXA2xx PCMCIA driver was registering a device_driver with the platform_bus_type. Unfortunately, this causes data outside the device_driver structure to be dereferenced as if it were a platform_driver structure, causing an oops. Convert the PXA2xx core driver to use the proper platform_driver structure. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
260 lines
6.6 KiB
C
260 lines
6.6 KiB
C
/*======================================================================
|
|
|
|
Device driver for the PCMCIA control functionality of PXA2xx
|
|
microprocessors.
|
|
|
|
The contents of this file may be used under the
|
|
terms of the GNU Public License version 2 (the "GPL")
|
|
|
|
(c) Ian Molton (spyro@f2s.com) 2003
|
|
(c) Stefan Eletzhofer (stefan.eletzhofer@inquant.de) 2003,4
|
|
|
|
derived from sa11xx_base.c
|
|
|
|
Portions created by John G. Dorsey are
|
|
Copyright (C) 1999 John G. Dorsey.
|
|
|
|
======================================================================*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/cpufreq.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <asm/hardware.h>
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/system.h>
|
|
#include <asm/arch/pxa-regs.h>
|
|
|
|
#include <pcmcia/cs_types.h>
|
|
#include <pcmcia/ss.h>
|
|
#include <pcmcia/bulkmem.h>
|
|
#include <pcmcia/cistpl.h>
|
|
|
|
#include "cs_internal.h"
|
|
#include "soc_common.h"
|
|
#include "pxa2xx_base.h"
|
|
|
|
|
|
#define MCXX_SETUP_MASK (0x7f)
|
|
#define MCXX_ASST_MASK (0x1f)
|
|
#define MCXX_HOLD_MASK (0x3f)
|
|
#define MCXX_SETUP_SHIFT (0)
|
|
#define MCXX_ASST_SHIFT (7)
|
|
#define MCXX_HOLD_SHIFT (14)
|
|
|
|
static inline u_int pxa2xx_mcxx_hold(u_int pcmcia_cycle_ns,
|
|
u_int mem_clk_10khz)
|
|
{
|
|
u_int code = pcmcia_cycle_ns * mem_clk_10khz;
|
|
return (code / 300000) + ((code % 300000) ? 1 : 0) - 1;
|
|
}
|
|
|
|
static inline u_int pxa2xx_mcxx_asst(u_int pcmcia_cycle_ns,
|
|
u_int mem_clk_10khz)
|
|
{
|
|
u_int code = pcmcia_cycle_ns * mem_clk_10khz;
|
|
return (code / 300000) + ((code % 300000) ? 1 : 0) - 1;
|
|
}
|
|
|
|
static inline u_int pxa2xx_mcxx_setup(u_int pcmcia_cycle_ns,
|
|
u_int mem_clk_10khz)
|
|
{
|
|
u_int code = pcmcia_cycle_ns * mem_clk_10khz;
|
|
return (code / 100000) + ((code % 100000) ? 1 : 0) - 1;
|
|
}
|
|
|
|
/* This function returns the (approximate) command assertion period, in
|
|
* nanoseconds, for a given CPU clock frequency and MCXX_ASST value:
|
|
*/
|
|
static inline u_int pxa2xx_pcmcia_cmd_time(u_int mem_clk_10khz,
|
|
u_int pcmcia_mcxx_asst)
|
|
{
|
|
return (300000 * (pcmcia_mcxx_asst + 1) / mem_clk_10khz);
|
|
}
|
|
|
|
static int pxa2xx_pcmcia_set_mcmem( int sock, int speed, int clock )
|
|
{
|
|
MCMEM(sock) = ((pxa2xx_mcxx_setup(speed, clock)
|
|
& MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT)
|
|
| ((pxa2xx_mcxx_asst(speed, clock)
|
|
& MCXX_ASST_MASK) << MCXX_ASST_SHIFT)
|
|
| ((pxa2xx_mcxx_hold(speed, clock)
|
|
& MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pxa2xx_pcmcia_set_mcio( int sock, int speed, int clock )
|
|
{
|
|
MCIO(sock) = ((pxa2xx_mcxx_setup(speed, clock)
|
|
& MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT)
|
|
| ((pxa2xx_mcxx_asst(speed, clock)
|
|
& MCXX_ASST_MASK) << MCXX_ASST_SHIFT)
|
|
| ((pxa2xx_mcxx_hold(speed, clock)
|
|
& MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pxa2xx_pcmcia_set_mcatt( int sock, int speed, int clock )
|
|
{
|
|
MCATT(sock) = ((pxa2xx_mcxx_setup(speed, clock)
|
|
& MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT)
|
|
| ((pxa2xx_mcxx_asst(speed, clock)
|
|
& MCXX_ASST_MASK) << MCXX_ASST_SHIFT)
|
|
| ((pxa2xx_mcxx_hold(speed, clock)
|
|
& MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pxa2xx_pcmcia_set_mcxx(struct soc_pcmcia_socket *skt, unsigned int clk)
|
|
{
|
|
struct soc_pcmcia_timing timing;
|
|
int sock = skt->nr;
|
|
|
|
soc_common_pcmcia_get_timing(skt, &timing);
|
|
|
|
pxa2xx_pcmcia_set_mcmem(sock, timing.mem, clk);
|
|
pxa2xx_pcmcia_set_mcatt(sock, timing.attr, clk);
|
|
pxa2xx_pcmcia_set_mcio(sock, timing.io, clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pxa2xx_pcmcia_set_timing(struct soc_pcmcia_socket *skt)
|
|
{
|
|
unsigned int clk = get_memclk_frequency_10khz();
|
|
return pxa2xx_pcmcia_set_mcxx(skt, clk);
|
|
}
|
|
|
|
#ifdef CONFIG_CPU_FREQ
|
|
|
|
static int
|
|
pxa2xx_pcmcia_frequency_change(struct soc_pcmcia_socket *skt,
|
|
unsigned long val,
|
|
struct cpufreq_freqs *freqs)
|
|
{
|
|
#warning "it's not clear if this is right since the core CPU (N) clock has no effect on the memory (L) clock"
|
|
switch (val) {
|
|
case CPUFREQ_PRECHANGE:
|
|
if (freqs->new > freqs->old) {
|
|
debug(skt, 2, "new frequency %u.%uMHz > %u.%uMHz, "
|
|
"pre-updating\n",
|
|
freqs->new / 1000, (freqs->new / 100) % 10,
|
|
freqs->old / 1000, (freqs->old / 100) % 10);
|
|
pxa2xx_pcmcia_set_mcxx(skt, freqs->new);
|
|
}
|
|
break;
|
|
|
|
case CPUFREQ_POSTCHANGE:
|
|
if (freqs->new < freqs->old) {
|
|
debug(skt, 2, "new frequency %u.%uMHz < %u.%uMHz, "
|
|
"post-updating\n",
|
|
freqs->new / 1000, (freqs->new / 100) % 10,
|
|
freqs->old / 1000, (freqs->old / 100) % 10);
|
|
pxa2xx_pcmcia_set_mcxx(skt, freqs->new);
|
|
}
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
int __pxa2xx_drv_pcmcia_probe(struct device *dev)
|
|
{
|
|
int ret;
|
|
struct pcmcia_low_level *ops;
|
|
int first, nr;
|
|
|
|
if (!dev || !dev->platform_data)
|
|
return -ENODEV;
|
|
|
|
ops = (struct pcmcia_low_level *)dev->platform_data;
|
|
first = ops->first;
|
|
nr = ops->nr;
|
|
|
|
/* Provide our PXA2xx specific timing routines. */
|
|
ops->set_timing = pxa2xx_pcmcia_set_timing;
|
|
#ifdef CONFIG_CPU_FREQ
|
|
ops->frequency_change = pxa2xx_pcmcia_frequency_change;
|
|
#endif
|
|
|
|
ret = soc_common_drv_pcmcia_probe(dev, ops, first, nr);
|
|
|
|
if (ret == 0) {
|
|
/*
|
|
* We have at least one socket, so set MECR:CIT
|
|
* (Card Is There)
|
|
*/
|
|
MECR |= MECR_CIT;
|
|
|
|
/* Set MECR:NOS (Number Of Sockets) */
|
|
if (nr > 1)
|
|
MECR |= MECR_NOS;
|
|
else
|
|
MECR &= ~MECR_NOS;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(__pxa2xx_drv_pcmcia_probe);
|
|
|
|
|
|
static int pxa2xx_drv_pcmcia_probe(struct platform_device *dev)
|
|
{
|
|
return __pxa2xx_drv_pcmcia_probe(&dev->dev);
|
|
}
|
|
|
|
static int pxa2xx_drv_pcmcia_remove(struct platform_device *dev)
|
|
{
|
|
return soc_common_drv_pcmcia_remove(&dev->dev);
|
|
}
|
|
|
|
static int pxa2xx_drv_pcmcia_suspend(struct platform_device *dev, pm_message_t state)
|
|
{
|
|
return pcmcia_socket_dev_suspend(&dev->dev, state);
|
|
}
|
|
|
|
static int pxa2xx_drv_pcmcia_resume(struct platform_device *dev)
|
|
{
|
|
struct pcmcia_low_level *ops = dev->dev.platform_data;
|
|
int nr = ops ? ops->nr : 0;
|
|
|
|
MECR = nr > 1 ? MECR_CIT | MECR_NOS : (nr > 0 ? MECR_CIT : 0);
|
|
|
|
return pcmcia_socket_dev_resume(&dev->dev);
|
|
}
|
|
|
|
static struct platform_driver pxa2xx_pcmcia_driver = {
|
|
.probe = pxa2xx_drv_pcmcia_probe,
|
|
.remove = pxa2xx_drv_pcmcia_remove,
|
|
.suspend = pxa2xx_drv_pcmcia_suspend,
|
|
.resume = pxa2xx_drv_pcmcia_resume,
|
|
.driver = {
|
|
.name = "pxa2xx-pcmcia",
|
|
},
|
|
};
|
|
|
|
static int __init pxa2xx_pcmcia_init(void)
|
|
{
|
|
return platform_driver_register(&pxa2xx_pcmcia_driver);
|
|
}
|
|
|
|
static void __exit pxa2xx_pcmcia_exit(void)
|
|
{
|
|
platform_driver_unregister(&pxa2xx_pcmcia_driver);
|
|
}
|
|
|
|
fs_initcall(pxa2xx_pcmcia_init);
|
|
module_exit(pxa2xx_pcmcia_exit);
|
|
|
|
MODULE_AUTHOR("Stefan Eletzhofer <stefan.eletzhofer@inquant.de> and Ian Molton <spyro@f2s.com>");
|
|
MODULE_DESCRIPTION("Linux PCMCIA Card Services: PXA2xx core socket driver");
|
|
MODULE_LICENSE("GPL");
|