linux/drivers/net/wireless/libertas/defs.h
Johannes Berg c1e5f4714d cfg80211: constify more pointers in the cfg80211 API
This also propagates through the drivers.

The orinoco driver uses the cfg80211 API structs for internal
bookkeeping, and so needs a (void *) cast that removes the
const - but that's OK because it allocates those pointers.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-19 17:53:16 +02:00

395 lines
11 KiB
C

/*
* This header file contains global constant/enum definitions,
* global variable declaration.
*/
#ifndef _LBS_DEFS_H_
#define _LBS_DEFS_H_
#include <linux/spinlock.h>
#ifdef CONFIG_LIBERTAS_DEBUG
#define DEBUG
#define PROC_DEBUG
#endif
#ifndef DRV_NAME
#define DRV_NAME "libertas"
#endif
#define LBS_DEB_ENTER 0x00000001
#define LBS_DEB_LEAVE 0x00000002
#define LBS_DEB_MAIN 0x00000004
#define LBS_DEB_NET 0x00000008
#define LBS_DEB_MESH 0x00000010
#define LBS_DEB_WEXT 0x00000020
#define LBS_DEB_IOCTL 0x00000040
#define LBS_DEB_SCAN 0x00000080
#define LBS_DEB_ASSOC 0x00000100
#define LBS_DEB_JOIN 0x00000200
#define LBS_DEB_11D 0x00000400
#define LBS_DEB_DEBUGFS 0x00000800
#define LBS_DEB_ETHTOOL 0x00001000
#define LBS_DEB_HOST 0x00002000
#define LBS_DEB_CMD 0x00004000
#define LBS_DEB_RX 0x00008000
#define LBS_DEB_TX 0x00010000
#define LBS_DEB_USB 0x00020000
#define LBS_DEB_CS 0x00040000
#define LBS_DEB_FW 0x00080000
#define LBS_DEB_THREAD 0x00100000
#define LBS_DEB_HEX 0x00200000
#define LBS_DEB_SDIO 0x00400000
#define LBS_DEB_SYSFS 0x00800000
#define LBS_DEB_SPI 0x01000000
#define LBS_DEB_CFG80211 0x02000000
extern unsigned int lbs_debug;
#ifdef DEBUG
#define LBS_DEB_LL(grp, grpnam, fmt, args...) \
do { if ((lbs_debug & (grp)) == (grp)) \
printk(KERN_DEBUG DRV_NAME grpnam "%s: " fmt, \
in_interrupt() ? " (INT)" : "", ## args); } while (0)
#else
#define LBS_DEB_LL(grp, grpnam, fmt, args...) do {} while (0)
#endif
#define lbs_deb_enter(grp) \
LBS_DEB_LL(grp | LBS_DEB_ENTER, " enter", "%s()\n", __func__);
#define lbs_deb_enter_args(grp, fmt, args...) \
LBS_DEB_LL(grp | LBS_DEB_ENTER, " enter", "%s(" fmt ")\n", __func__, ## args);
#define lbs_deb_leave(grp) \
LBS_DEB_LL(grp | LBS_DEB_LEAVE, " leave", "%s()\n", __func__);
#define lbs_deb_leave_args(grp, fmt, args...) \
LBS_DEB_LL(grp | LBS_DEB_LEAVE, " leave", "%s(), " fmt "\n", \
__func__, ##args);
#define lbs_deb_main(fmt, args...) LBS_DEB_LL(LBS_DEB_MAIN, " main", fmt, ##args)
#define lbs_deb_net(fmt, args...) LBS_DEB_LL(LBS_DEB_NET, " net", fmt, ##args)
#define lbs_deb_mesh(fmt, args...) LBS_DEB_LL(LBS_DEB_MESH, " mesh", fmt, ##args)
#define lbs_deb_wext(fmt, args...) LBS_DEB_LL(LBS_DEB_WEXT, " wext", fmt, ##args)
#define lbs_deb_ioctl(fmt, args...) LBS_DEB_LL(LBS_DEB_IOCTL, " ioctl", fmt, ##args)
#define lbs_deb_scan(fmt, args...) LBS_DEB_LL(LBS_DEB_SCAN, " scan", fmt, ##args)
#define lbs_deb_assoc(fmt, args...) LBS_DEB_LL(LBS_DEB_ASSOC, " assoc", fmt, ##args)
#define lbs_deb_join(fmt, args...) LBS_DEB_LL(LBS_DEB_JOIN, " join", fmt, ##args)
#define lbs_deb_11d(fmt, args...) LBS_DEB_LL(LBS_DEB_11D, " 11d", fmt, ##args)
#define lbs_deb_debugfs(fmt, args...) LBS_DEB_LL(LBS_DEB_DEBUGFS, " debugfs", fmt, ##args)
#define lbs_deb_ethtool(fmt, args...) LBS_DEB_LL(LBS_DEB_ETHTOOL, " ethtool", fmt, ##args)
#define lbs_deb_host(fmt, args...) LBS_DEB_LL(LBS_DEB_HOST, " host", fmt, ##args)
#define lbs_deb_cmd(fmt, args...) LBS_DEB_LL(LBS_DEB_CMD, " cmd", fmt, ##args)
#define lbs_deb_rx(fmt, args...) LBS_DEB_LL(LBS_DEB_RX, " rx", fmt, ##args)
#define lbs_deb_tx(fmt, args...) LBS_DEB_LL(LBS_DEB_TX, " tx", fmt, ##args)
#define lbs_deb_fw(fmt, args...) LBS_DEB_LL(LBS_DEB_FW, " fw", fmt, ##args)
#define lbs_deb_usb(fmt, args...) LBS_DEB_LL(LBS_DEB_USB, " usb", fmt, ##args)
#define lbs_deb_usbd(dev, fmt, args...) LBS_DEB_LL(LBS_DEB_USB, " usbd", "%s:" fmt, dev_name(dev), ##args)
#define lbs_deb_cs(fmt, args...) LBS_DEB_LL(LBS_DEB_CS, " cs", fmt, ##args)
#define lbs_deb_thread(fmt, args...) LBS_DEB_LL(LBS_DEB_THREAD, " thread", fmt, ##args)
#define lbs_deb_sdio(fmt, args...) LBS_DEB_LL(LBS_DEB_SDIO, " sdio", fmt, ##args)
#define lbs_deb_sysfs(fmt, args...) LBS_DEB_LL(LBS_DEB_SYSFS, " sysfs", fmt, ##args)
#define lbs_deb_spi(fmt, args...) LBS_DEB_LL(LBS_DEB_SPI, " spi", fmt, ##args)
#define lbs_deb_cfg80211(fmt, args...) LBS_DEB_LL(LBS_DEB_CFG80211, " cfg80211", fmt, ##args)
#ifdef DEBUG
static inline void lbs_deb_hex(unsigned int grp, const char *prompt,
const u8 *buf, int len)
{
int i = 0;
if (len &&
(lbs_debug & LBS_DEB_HEX) &&
(lbs_debug & grp))
{
for (i = 1; i <= len; i++) {
if ((i & 0xf) == 1) {
if (i != 1)
printk("\n");
printk(DRV_NAME " %s: ", prompt);
}
printk("%02x ", (u8) * buf);
buf++;
}
printk("\n");
}
}
#else
#define lbs_deb_hex(grp,prompt,buf,len) do {} while (0)
#endif
/* Buffer Constants */
/* The size of SQ memory PPA, DPA are 8 DWORDs, that keep the physical
* addresses of TxPD buffers. Station has only 8 TxPD available, Whereas
* driver has more local TxPDs. Each TxPD on the host memory is associated
* with a Tx control node. The driver maintains 8 RxPD descriptors for
* station firmware to store Rx packet information.
*
* Current version of MAC has a 32x6 multicast address buffer.
*
* 802.11b can have up to 14 channels, the driver keeps the
* BSSID(MAC address) of each APs or Ad hoc stations it has sensed.
*/
#define MRVDRV_MAX_MULTICAST_LIST_SIZE 32
#define LBS_NUM_CMD_BUFFERS 10
#define LBS_CMD_BUFFER_SIZE (2 * 1024)
#define MRVDRV_MAX_CHANNEL_SIZE 14
#define MRVDRV_ASSOCIATION_TIME_OUT 255
#define MRVDRV_SNAP_HEADER_LEN 8
#define LBS_UPLD_SIZE 2312
#define DEV_NAME_LEN 32
/* Wake criteria for HOST_SLEEP_CFG command */
#define EHS_WAKE_ON_BROADCAST_DATA 0x0001
#define EHS_WAKE_ON_UNICAST_DATA 0x0002
#define EHS_WAKE_ON_MAC_EVENT 0x0004
#define EHS_WAKE_ON_MULTICAST_DATA 0x0008
#define EHS_REMOVE_WAKEUP 0xFFFFFFFF
/* Wake rules for Host_Sleep_CFG command */
#define WOL_RULE_NET_TYPE_INFRA_OR_IBSS 0x00
#define WOL_RULE_NET_TYPE_MESH 0x10
#define WOL_RULE_ADDR_TYPE_BCAST 0x01
#define WOL_RULE_ADDR_TYPE_MCAST 0x08
#define WOL_RULE_ADDR_TYPE_UCAST 0x02
#define WOL_RULE_OP_AND 0x01
#define WOL_RULE_OP_OR 0x02
#define WOL_RULE_OP_INVALID 0xFF
#define WOL_RESULT_VALID_CMD 0
#define WOL_RESULT_NOSPC_ERR 1
#define WOL_RESULT_EEXIST_ERR 2
/* Misc constants */
/* This section defines 802.11 specific contants */
#define MRVDRV_MAX_BSS_DESCRIPTS 16
#define MRVDRV_MAX_REGION_CODE 6
#define MRVDRV_DEFAULT_LISTEN_INTERVAL 10
#define MRVDRV_CHANNELS_PER_SCAN 4
#define MRVDRV_MAX_CHANNELS_PER_SCAN 14
#define MRVDRV_MIN_BEACON_INTERVAL 20
#define MRVDRV_MAX_BEACON_INTERVAL 1000
#define MRVDRV_BEACON_INTERVAL 100
#define MARVELL_MESH_IE_LENGTH 9
/*
* Values used to populate the struct mrvl_mesh_ie. The only time you need this
* is when enabling the mesh using CMD_MESH_CONFIG.
*/
#define MARVELL_MESH_IE_TYPE 4
#define MARVELL_MESH_IE_SUBTYPE 0
#define MARVELL_MESH_IE_VERSION 0
#define MARVELL_MESH_PROTO_ID_HWMP 0
#define MARVELL_MESH_METRIC_ID 0
#define MARVELL_MESH_CAPABILITY 0
/* INT status Bit Definition */
#define MRVDRV_TX_DNLD_RDY 0x0001
#define MRVDRV_RX_UPLD_RDY 0x0002
#define MRVDRV_CMD_DNLD_RDY 0x0004
#define MRVDRV_CMD_UPLD_RDY 0x0008
#define MRVDRV_CARDEVENT 0x0010
/* Automatic TX control default levels */
#define POW_ADAPT_DEFAULT_P0 13
#define POW_ADAPT_DEFAULT_P1 15
#define POW_ADAPT_DEFAULT_P2 18
#define TPC_DEFAULT_P0 5
#define TPC_DEFAULT_P1 10
#define TPC_DEFAULT_P2 13
/* TxPD status */
/*
* Station firmware use TxPD status field to report final Tx transmit
* result, Bit masks are used to present combined situations.
*/
#define MRVDRV_TxPD_POWER_MGMT_NULL_PACKET 0x01
#define MRVDRV_TxPD_POWER_MGMT_LAST_PACKET 0x08
/* Tx mesh flag */
/*
* Currently we are using normal WDS flag as mesh flag.
* TODO: change to proper mesh flag when MAC understands it.
*/
#define TxPD_CONTROL_WDS_FRAME (1<<17)
#define TxPD_MESH_FRAME TxPD_CONTROL_WDS_FRAME
/* Mesh interface ID */
#define MESH_IFACE_ID 0x0001
/* Mesh id should be in bits 14-13-12 */
#define MESH_IFACE_BIT_OFFSET 0x000c
/* Mesh enable bit in FW capability */
#define MESH_CAPINFO_ENABLE_MASK (1<<16)
/* FW definition from Marvell v4 */
#define MRVL_FW_V4 (0x04)
/* FW definition from Marvell v5 */
#define MRVL_FW_V5 (0x05)
/* FW definition from Marvell v10 */
#define MRVL_FW_V10 (0x0a)
/* FW major revision definition */
#define MRVL_FW_MAJOR_REV(x) ((x)>>24)
/* RxPD status */
#define MRVDRV_RXPD_STATUS_OK 0x0001
/* RxPD status - Received packet types */
/* Rx mesh flag */
/*
* Currently we are using normal WDS flag as mesh flag.
* TODO: change to proper mesh flag when MAC understands it.
*/
#define RxPD_CONTROL_WDS_FRAME (0x40)
#define RxPD_MESH_FRAME RxPD_CONTROL_WDS_FRAME
/* RSSI-related defines */
/*
* RSSI constants are used to implement 802.11 RSSI threshold
* indication. if the Rx packet signal got too weak for 5 consecutive
* times, miniport driver (driver) will report this event to wrapper
*/
#define MRVDRV_NF_DEFAULT_SCAN_VALUE (-96)
/* RTS/FRAG related defines */
#define MRVDRV_RTS_MIN_VALUE 0
#define MRVDRV_RTS_MAX_VALUE 2347
#define MRVDRV_FRAG_MIN_VALUE 256
#define MRVDRV_FRAG_MAX_VALUE 2346
/* This is for firmware specific length */
#define EXTRA_LEN 36
#define MRVDRV_ETH_TX_PACKET_BUFFER_SIZE \
(ETH_FRAME_LEN + sizeof(struct txpd) + EXTRA_LEN)
#define MRVDRV_ETH_RX_PACKET_BUFFER_SIZE \
(ETH_FRAME_LEN + sizeof(struct rxpd) \
+ MRVDRV_SNAP_HEADER_LEN + EXTRA_LEN)
#define CMD_F_HOSTCMD (1 << 0)
#define FW_CAPINFO_WPA (1 << 0)
#define FW_CAPINFO_PS (1 << 1)
#define FW_CAPINFO_FIRMWARE_UPGRADE (1 << 13)
#define FW_CAPINFO_BOOT2_UPGRADE (1<<14)
#define FW_CAPINFO_PERSISTENT_CONFIG (1<<15)
#define KEY_LEN_WPA_AES 16
#define KEY_LEN_WPA_TKIP 32
#define KEY_LEN_WEP_104 13
#define KEY_LEN_WEP_40 5
#define RF_ANTENNA_1 0x1
#define RF_ANTENNA_2 0x2
#define RF_ANTENNA_AUTO 0xFFFF
#define BAND_B (0x01)
#define BAND_G (0x02)
#define ALL_802_11_BANDS (BAND_B | BAND_G)
#define MAX_RATES 14
#define MAX_LEDS 8
/* Global Variable Declaration */
extern const char lbs_driver_version[];
extern u16 lbs_region_code_to_index[MRVDRV_MAX_REGION_CODE];
/* ENUM definition */
/* SNRNF_TYPE */
enum SNRNF_TYPE {
TYPE_BEACON = 0,
TYPE_RXPD,
MAX_TYPE_B
};
/* SNRNF_DATA */
enum SNRNF_DATA {
TYPE_NOAVG = 0,
TYPE_AVG,
MAX_TYPE_AVG
};
/* LBS_802_11_POWER_MODE */
enum LBS_802_11_POWER_MODE {
LBS802_11POWERMODECAM,
LBS802_11POWERMODEMAX_PSP,
LBS802_11POWERMODEFAST_PSP,
/* not a real mode, defined as an upper bound */
LBS802_11POWEMODEMAX
};
/* PS_STATE */
enum PS_STATE {
PS_STATE_FULL_POWER,
PS_STATE_AWAKE,
PS_STATE_PRE_SLEEP,
PS_STATE_SLEEP
};
/* DNLD_STATE */
enum DNLD_STATE {
DNLD_RES_RECEIVED,
DNLD_DATA_SENT,
DNLD_CMD_SENT,
DNLD_BOOTCMD_SENT,
};
/* LBS_MEDIA_STATE */
enum LBS_MEDIA_STATE {
LBS_CONNECTED,
LBS_DISCONNECTED
};
/* LBS_802_11_PRIVACY_FILTER */
enum LBS_802_11_PRIVACY_FILTER {
LBS802_11PRIVFILTERACCEPTALL,
LBS802_11PRIVFILTER8021XWEP
};
/* mv_ms_type */
enum mv_ms_type {
MVMS_DAT = 0,
MVMS_CMD = 1,
MVMS_TXDONE = 2,
MVMS_EVENT
};
/* KEY_TYPE_ID */
enum KEY_TYPE_ID {
KEY_TYPE_ID_WEP = 0,
KEY_TYPE_ID_TKIP,
KEY_TYPE_ID_AES
};
/* KEY_INFO_WPA (applies to both TKIP and AES/CCMP) */
enum KEY_INFO_WPA {
KEY_INFO_WPA_MCAST = 0x01,
KEY_INFO_WPA_UNICAST = 0x02,
KEY_INFO_WPA_ENABLED = 0x04
};
/* Default values for fwt commands. */
#define FWT_DEFAULT_METRIC 0
#define FWT_DEFAULT_DIR 1
/* Default Rate, 11Mbps */
#define FWT_DEFAULT_RATE 3
#define FWT_DEFAULT_SSN 0xffffffff
#define FWT_DEFAULT_DSN 0
#define FWT_DEFAULT_HOPCOUNT 0
#define FWT_DEFAULT_TTL 0
#define FWT_DEFAULT_EXPIRATION 0
#define FWT_DEFAULT_SLEEPMODE 0
#define FWT_DEFAULT_SNR 0
#endif