leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
a17dd1ebd5
linux/drivers/media/video/davinci/vpbe_display.c
Hans Verkuil 5126f2590b [media] v4l2-dev: add flag to have the core lock all file operations 
This used to be the default if the lock pointer was set, but now that lock is by
default only used for ioctl serialization. Those drivers that already used
core locking have this flag set explicitly, except for some drivers where
it was obvious that there was no need to serialize any file operations other
than ioctl.

The drivers that didn't need this flag were:

drivers/media/radio/dsbr100.c
drivers/media/radio/radio-isa.c
drivers/media/radio/radio-keene.c
drivers/media/radio/radio-miropcm20.c
drivers/media/radio/radio-mr800.c
drivers/media/radio/radio-tea5764.c
drivers/media/radio/radio-timb.c
drivers/media/video/vivi.c
sound/i2c/other/tea575x-tuner.c

The other drivers that use core locking and where it was not immediately
obvious that this flag wasn't needed were changed so that the flag is set
together with a comment that that driver needs work to avoid having to
set that flag. This will often involve taking the core lock in the fops
themselves.

Eventually this flag should go and it should not be used in new drivers.

There are a few reasons why we want to avoid core locking of non-ioctl
fops: in the case of mmap this can lead to a deadlock in rare situations
since when mmap is called the mmap_sem is held and it is possible for
other parts of the code to take that lock as well (copy_from_user()/copy_to_user()
perform a down_read(&mm->mmap_sem) when a page fault occurs).

It is very unlikely that that happens since the core lock serializes all
fops, but the kernel warns about it if lock validation is turned on.

For poll it is also undesirable to take the core lock as that can introduce
increased latency. The same is true for read/write.

While it was possible to make flags or something to turn on/off taking the
core lock for each file operation, in practice it is much simpler to just
not take it at all except for ioctl and leave it to the driver to take the
lock. There are only a handful fops compared to the zillion ioctls we have.

I also wanted to make it obvious which drivers still take the lock for all
fops, so that's why I chose to have drivers set it explicitly.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14 09:19:38 -03:00

1829 lines
49 KiB
C
Raw Blame History

/*
* Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/string.h>
#include <linux/wait.h>
#include <linux/time.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/mm.h>
#include <linux/mutex.h>
#include <linux/videodev2.h>
#include <linux/slab.h>
#include <asm/pgtable.h>
#include <mach/cputype.h>
#include <media/v4l2-dev.h>
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
#include <media/v4l2-device.h>
#include <media/davinci/vpbe_display.h>
#include <media/davinci/vpbe_types.h>
#include <media/davinci/vpbe.h>
#include <media/davinci/vpbe_venc.h>
#include <media/davinci/vpbe_osd.h>
#include "vpbe_venc_regs.h"
#define VPBE_DISPLAY_DRIVER "vpbe-v4l2"
static int debug;
#define VPBE_DEFAULT_NUM_BUFS 3
module_param(debug, int, 0644);
static int venc_is_second_field(struct vpbe_display *disp_dev)
{
struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
int ret;
int val;
ret = v4l2_subdev_call(vpbe_dev->venc,
core,
ioctl,
VENC_GET_FLD,
&val);
if (ret < 0) {
v4l2_err(&vpbe_dev->v4l2_dev,
"Error in getting Field ID 0\n");
}
return val;
}
static void vpbe_isr_even_field(struct vpbe_display *disp_obj,
struct vpbe_layer *layer)
{
struct timespec timevalue;
if (layer->cur_frm == layer->next_frm)
return;
ktime_get_ts(&timevalue);
layer->cur_frm->ts.tv_sec = timevalue.tv_sec;
layer->cur_frm->ts.tv_usec = timevalue.tv_nsec / NSEC_PER_USEC;
layer->cur_frm->state = VIDEOBUF_DONE;
wake_up_interruptible(&layer->cur_frm->done);
/* Make cur_frm pointing to next_frm */
layer->cur_frm = layer->next_frm;
}
static void vpbe_isr_odd_field(struct vpbe_display *disp_obj,
struct vpbe_layer *layer)
{
struct osd_state *osd_device = disp_obj->osd_device;
unsigned long addr;
spin_lock(&disp_obj->dma_queue_lock);
if (list_empty(&layer->dma_queue) ||
(layer->cur_frm != layer->next_frm)) {
spin_unlock(&disp_obj->dma_queue_lock);
return;
}
/*
* one field is displayed configure
* the next frame if it is available
* otherwise hold on current frame
* Get next from the buffer queue
*/
layer->next_frm = list_entry(
layer->dma_queue.next,
struct videobuf_buffer,
queue);
/* Remove that from the buffer queue */
list_del(&layer->next_frm->queue);
spin_unlock(&disp_obj->dma_queue_lock);
/* Mark state of the frame to active */
layer->next_frm->state = VIDEOBUF_ACTIVE;
addr = videobuf_to_dma_contig(layer->next_frm);
osd_device->ops.start_layer(osd_device,
layer->layer_info.id,
addr,
disp_obj->cbcr_ofst);
}
/* interrupt service routine */
static irqreturn_t venc_isr(int irq, void *arg)
{
struct vpbe_display *disp_dev = (struct vpbe_display *)arg;
struct vpbe_layer *layer;
static unsigned last_event;
unsigned event = 0;
int fid;
int i;
if ((NULL == arg) || (NULL == disp_dev->dev[0]))
return IRQ_HANDLED;
if (venc_is_second_field(disp_dev))
event |= VENC_SECOND_FIELD;
else
event |= VENC_FIRST_FIELD;
if (event == (last_event & ~VENC_END_OF_FRAME)) {
/*
* If the display is non-interlaced, then we need to flag the
* end-of-frame event at every interrupt regardless of the
* value of the FIDST bit. We can conclude that the display is
* non-interlaced if the value of the FIDST bit is unchanged
* from the previous interrupt.
*/
event |= VENC_END_OF_FRAME;
} else if (event == VENC_SECOND_FIELD) {
/* end-of-frame for interlaced display */
event |= VENC_END_OF_FRAME;
}
last_event = event;
for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) {
layer = disp_dev->dev[i];
/* If streaming is started in this layer */
if (!layer->started)
continue;
if (layer->layer_first_int) {
layer->layer_first_int = 0;
continue;
}
/* Check the field format */
if ((V4L2_FIELD_NONE == layer->pix_fmt.field) &&
(event & VENC_END_OF_FRAME)) {
/* Progressive mode */
vpbe_isr_even_field(disp_dev, layer);
vpbe_isr_odd_field(disp_dev, layer);
} else {
/* Interlaced mode */
layer->field_id ^= 1;
if (event & VENC_FIRST_FIELD)
fid = 0;
else
fid = 1;
/*
* If field id does not match with store
* field id
*/
if (fid != layer->field_id) {
/* Make them in sync */
layer->field_id = fid;
continue;
}
/*
* device field id and local field id are
* in sync. If this is even field
*/
if (0 == fid)
vpbe_isr_even_field(disp_dev, layer);
else /* odd field */
vpbe_isr_odd_field(disp_dev, layer);
}
}
return IRQ_HANDLED;
}
/*
* vpbe_buffer_prepare()
* This is the callback function called from videobuf_qbuf() function
* the buffer is prepared and user space virtual address is converted into
* physical address
*/
static int vpbe_buffer_prepare(struct videobuf_queue *q,
struct videobuf_buffer *vb,
enum v4l2_field field)
{
struct vpbe_fh *fh = q->priv_data;
struct vpbe_layer *layer = fh->layer;
struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
unsigned long addr;
int ret;
v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
"vpbe_buffer_prepare\n");
/* If buffer is not initialized, initialize it */
if (VIDEOBUF_NEEDS_INIT == vb->state) {
vb->width = layer->pix_fmt.width;
vb->height = layer->pix_fmt.height;
vb->size = layer->pix_fmt.sizeimage;
vb->field = field;
ret = videobuf_iolock(q, vb, NULL);
if (ret < 0) {
v4l2_err(&vpbe_dev->v4l2_dev, "Failed to map \
user address\n");
return -EINVAL;
}
addr = videobuf_to_dma_contig(vb);
if (q->streaming) {
if (!IS_ALIGNED(addr, 8)) {
v4l2_err(&vpbe_dev->v4l2_dev,
"buffer_prepare:offset is \
not aligned to 32 bytes\n");
return -EINVAL;
}
}
vb->state = VIDEOBUF_PREPARED;
}
return 0;
}
/*
* vpbe_buffer_setup()
* This function allocates memory for the buffers
*/
static int vpbe_buffer_setup(struct videobuf_queue *q,
unsigned int *count,
unsigned int *size)
{
/* Get the file handle object and layer object */
struct vpbe_fh *fh = q->priv_data;
struct vpbe_layer *layer = fh->layer;
struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_buffer_setup\n");
*size = layer->pix_fmt.sizeimage;
/* Store number of buffers allocated in numbuffer member */
if (*count < VPBE_DEFAULT_NUM_BUFS)
*count = layer->numbuffers = VPBE_DEFAULT_NUM_BUFS;
return 0;
}
/*
* vpbe_buffer_queue()
* This function adds the buffer to DMA queue
*/
static void vpbe_buffer_queue(struct videobuf_queue *q,
struct videobuf_buffer *vb)
{
/* Get the file handle object and layer object */
struct vpbe_fh *fh = q->priv_data;
struct vpbe_layer *layer = fh->layer;
struct vpbe_display *disp = fh->disp_dev;
struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
unsigned long flags;
v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
"vpbe_buffer_queue\n");
/* add the buffer to the DMA queue */
spin_lock_irqsave(&disp->dma_queue_lock, flags);
list_add_tail(&vb->queue, &layer->dma_queue);
spin_unlock_irqrestore(&disp->dma_queue_lock, flags);
/* Change state of the buffer */
vb->state = VIDEOBUF_QUEUED;
}
/*
* vpbe_buffer_release()
* This function is called from the videobuf layer to free memory allocated to
* the buffers
*/
static void vpbe_buffer_release(struct videobuf_queue *q,
struct videobuf_buffer *vb)
{
/* Get the file handle object and layer object */
struct vpbe_fh *fh = q->priv_data;
struct vpbe_layer *layer = fh->layer;
struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
"vpbe_buffer_release\n");
if (V4L2_MEMORY_USERPTR != layer->memory)
videobuf_dma_contig_free(q, vb);
vb->state = VIDEOBUF_NEEDS_INIT;
}
static struct videobuf_queue_ops video_qops = {
.buf_setup = vpbe_buffer_setup,
.buf_prepare = vpbe_buffer_prepare,
.buf_queue = vpbe_buffer_queue,
.buf_release = vpbe_buffer_release,
};
static
struct vpbe_layer*
_vpbe_display_get_other_win_layer(struct vpbe_display *disp_dev,
struct vpbe_layer *layer)
{
enum vpbe_display_device_id thiswin, otherwin;
thiswin = layer->device_id;
otherwin = (thiswin == VPBE_DISPLAY_DEVICE_0) ?
VPBE_DISPLAY_DEVICE_1 : VPBE_DISPLAY_DEVICE_0;
return disp_dev->dev[otherwin];
}
static int vpbe_set_osd_display_params(struct vpbe_display *disp_dev,
struct vpbe_layer *layer)
{
struct osd_layer_config *cfg = &layer->layer_info.config;
struct osd_state *osd_device = disp_dev->osd_device;
struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
unsigned long addr;
int ret;
addr = videobuf_to_dma_contig(layer->cur_frm);
/* Set address in the display registers */
osd_device->ops.start_layer(osd_device,
layer->layer_info.id,
addr,
disp_dev->cbcr_ofst);
ret = osd_device->ops.enable_layer(osd_device,
layer->layer_info.id, 0);
if (ret < 0) {
v4l2_err(&vpbe_dev->v4l2_dev,
"Error in enabling osd window layer 0\n");
return -1;
}
/* Enable the window */
layer->layer_info.enable = 1;
if (cfg->pixfmt == PIXFMT_NV12) {
struct vpbe_layer *otherlayer =
_vpbe_display_get_other_win_layer(disp_dev, layer);
ret = osd_device->ops.enable_layer(osd_device,
otherlayer->layer_info.id, 1);
if (ret < 0) {
v4l2_err(&vpbe_dev->v4l2_dev,
"Error in enabling osd window layer 1\n");
return -1;
}
otherlayer->layer_info.enable = 1;
}
return 0;
}
static void
vpbe_disp_calculate_scale_factor(struct vpbe_display *disp_dev,
struct vpbe_layer *layer,
int expected_xsize, int expected_ysize)
{
struct display_layer_info *layer_info = &layer->layer_info;
struct v4l2_pix_format *pixfmt = &layer->pix_fmt;
struct osd_layer_config *cfg = &layer->layer_info.config;
struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
int calculated_xsize;
int h_exp = 0;
int v_exp = 0;
int h_scale;
int v_scale;
v4l2_std_id standard_id = vpbe_dev->current_timings.timings.std_id;
/*
* Application initially set the image format. Current display
* size is obtained from the vpbe display controller. expected_xsize
* and expected_ysize are set through S_CROP ioctl. Based on this,
* driver will calculate the scale factors for vertical and
* horizontal direction so that the image is displayed scaled
* and expanded. Application uses expansion to display the image
* in a square pixel. Otherwise it is displayed using displays
* pixel aspect ratio.It is expected that application chooses
* the crop coordinates for cropped or scaled display. if crop
* size is less than the image size, it is displayed cropped or
* it is displayed scaled and/or expanded.
*
* to begin with, set the crop window same as expected. Later we
* will override with scaled window size
*/
cfg->xsize = pixfmt->width;
cfg->ysize = pixfmt->height;
layer_info->h_zoom = ZOOM_X1; /* no horizontal zoom */
layer_info->v_zoom = ZOOM_X1; /* no horizontal zoom */
layer_info->h_exp = H_EXP_OFF; /* no horizontal zoom */
layer_info->v_exp = V_EXP_OFF; /* no horizontal zoom */
if (pixfmt->width < expected_xsize) {
h_scale = vpbe_dev->current_timings.xres / pixfmt->width;
if (h_scale < 2)
h_scale = 1;
else if (h_scale >= 4)
h_scale = 4;
else
h_scale = 2;
cfg->xsize *= h_scale;
if (cfg->xsize < expected_xsize) {
if ((standard_id & V4L2_STD_525_60) ||
(standard_id & V4L2_STD_625_50)) {
calculated_xsize = (cfg->xsize *
VPBE_DISPLAY_H_EXP_RATIO_N) /
VPBE_DISPLAY_H_EXP_RATIO_D;
if (calculated_xsize <= expected_xsize) {
h_exp = 1;
cfg->xsize = calculated_xsize;
}
}
}
if (h_scale == 2)
layer_info->h_zoom = ZOOM_X2;
else if (h_scale == 4)
layer_info->h_zoom = ZOOM_X4;
if (h_exp)
layer_info->h_exp = H_EXP_9_OVER_8;
} else {
/* no scaling, only cropping. Set display area to crop area */
cfg->xsize = expected_xsize;
}
if (pixfmt->height < expected_ysize) {
v_scale = expected_ysize / pixfmt->height;
if (v_scale < 2)
v_scale = 1;
else if (v_scale >= 4)
v_scale = 4;
else
v_scale = 2;
cfg->ysize *= v_scale;
if (cfg->ysize < expected_ysize) {
if ((standard_id & V4L2_STD_625_50)) {
calculated_xsize = (cfg->ysize *
VPBE_DISPLAY_V_EXP_RATIO_N) /
VPBE_DISPLAY_V_EXP_RATIO_D;
if (calculated_xsize <= expected_ysize) {
v_exp = 1;
cfg->ysize = calculated_xsize;
}
}
}
if (v_scale == 2)
layer_info->v_zoom = ZOOM_X2;
else if (v_scale == 4)
layer_info->v_zoom = ZOOM_X4;
if (v_exp)
layer_info->h_exp = V_EXP_6_OVER_5;
} else {
/* no scaling, only cropping. Set display area to crop area */
cfg->ysize = expected_ysize;
}
v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
"crop display xsize = %d, ysize = %d\n",
cfg->xsize, cfg->ysize);
}
static void vpbe_disp_adj_position(struct vpbe_display *disp_dev,
struct vpbe_layer *layer,
int top, int left)
{
struct osd_layer_config *cfg = &layer->layer_info.config;
struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
cfg->xpos = min((unsigned int)left,
vpbe_dev->current_timings.xres - cfg->xsize);
cfg->ypos = min((unsigned int)top,
vpbe_dev->current_timings.yres - cfg->ysize);
v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
"new xpos = %d, ypos = %d\n",
cfg->xpos, cfg->ypos);
}
static void vpbe_disp_check_window_params(struct vpbe_display *disp_dev,
struct v4l2_rect *c)
{
struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
if ((c->width == 0) ||
((c->width + c->left) > vpbe_dev->current_timings.xres))
c->width = vpbe_dev->current_timings.xres - c->left;
if ((c->height == 0) || ((c->height + c->top) >
vpbe_dev->current_timings.yres))
c->height = vpbe_dev->current_timings.yres - c->top;
/* window height must be even for interlaced display */
if (vpbe_dev->current_timings.interlaced)
c->height &= (~0x01);
}
/**
* vpbe_try_format()
* If user application provides width and height, and have bytesperline set
* to zero, driver calculates bytesperline and sizeimage based on hardware
* limits.
*/
static int vpbe_try_format(struct vpbe_display *disp_dev,
struct v4l2_pix_format *pixfmt, int check)
{
struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
int min_height = 1;
int min_width = 32;
int max_height;
int max_width;
int bpp;
if ((pixfmt->pixelformat != V4L2_PIX_FMT_UYVY) &&
(pixfmt->pixelformat != V4L2_PIX_FMT_NV12))
/* choose default as V4L2_PIX_FMT_UYVY */
pixfmt->pixelformat = V4L2_PIX_FMT_UYVY;
/* Check the field format */
if ((pixfmt->field != V4L2_FIELD_INTERLACED) &&
(pixfmt->field != V4L2_FIELD_NONE)) {
if (vpbe_dev->current_timings.interlaced)
pixfmt->field = V4L2_FIELD_INTERLACED;
else
pixfmt->field = V4L2_FIELD_NONE;
}
if (pixfmt->field == V4L2_FIELD_INTERLACED)
min_height = 2;
if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12)
bpp = 1;
else
bpp = 2;
max_width = vpbe_dev->current_timings.xres;
max_height = vpbe_dev->current_timings.yres;
min_width /= bpp;
if (!pixfmt->width || (pixfmt->width < min_width) ||
(pixfmt->width > max_width)) {
pixfmt->width = vpbe_dev->current_timings.xres;
}
if (!pixfmt->height || (pixfmt->height < min_height) ||
(pixfmt->height > max_height)) {
pixfmt->height = vpbe_dev->current_timings.yres;
}
if (pixfmt->bytesperline < (pixfmt->width * bpp))
pixfmt->bytesperline = pixfmt->width * bpp;
/* Make the bytesperline 32 byte aligned */
pixfmt->bytesperline = ((pixfmt->width * bpp + 31) & ~31);
if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12)
pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height +
(pixfmt->bytesperline * pixfmt->height >> 1);
else
pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
return 0;
}
static int vpbe_display_g_priority(struct file *file, void *priv,
enum v4l2_priority *p)
{
struct vpbe_fh *fh = file->private_data;
struct vpbe_layer *layer = fh->layer;
*p = v4l2_prio_max(&layer->prio);
return 0;
}
static int vpbe_display_s_priority(struct file *file, void *priv,
enum v4l2_priority p)
{
struct vpbe_fh *fh = file->private_data;
struct vpbe_layer *layer = fh->layer;
int ret;
ret = v4l2_prio_change(&layer->prio, &fh->prio, p);
return ret;
}
static int vpbe_display_querycap(struct file *file, void *priv,
struct v4l2_capability *cap)
{
struct vpbe_fh *fh = file->private_data;
struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
cap->version = VPBE_DISPLAY_VERSION_CODE;
cap->capabilities = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING;
strlcpy(cap->driver, VPBE_DISPLAY_DRIVER, sizeof(cap->driver));
strlcpy(cap->bus_info, "platform", sizeof(cap->bus_info));
strlcpy(cap->card, vpbe_dev->cfg->module_name, sizeof(cap->card));
return 0;
}
static int vpbe_display_s_crop(struct file *file, void *priv,
struct v4l2_crop *crop)
{
struct vpbe_fh *fh = file->private_data;
struct vpbe_layer *layer = fh->layer;
struct vpbe_display *disp_dev = fh->disp_dev;
struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
struct osd_layer_config *cfg = &layer->layer_info.config;
struct osd_state *osd_device = disp_dev->osd_device;
struct v4l2_rect *rect = &crop->c;
int ret;
v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
"VIDIOC_S_CROP, layer id = %d\n", layer->device_id);
if (crop->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) {
v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buf type\n");
return -EINVAL;
}
if (rect->top < 0)
rect->top = 0;
if (rect->left < 0)
rect->left = 0;
vpbe_disp_check_window_params(disp_dev, rect);
osd_device->ops.get_layer_config(osd_device,
layer->layer_info.id, cfg);
vpbe_disp_calculate_scale_factor(disp_dev, layer,
rect->width,
rect->height);
vpbe_disp_adj_position(disp_dev, layer, rect->top,
rect->left);
ret = osd_device->ops.set_layer_config(osd_device,
layer->layer_info.id, cfg);
if (ret < 0) {
v4l2_err(&vpbe_dev->v4l2_dev,
"Error in set layer config:\n");
return -EINVAL;
}
/* apply zooming and h or v expansion */
osd_device->ops.set_zoom(osd_device,
layer->layer_info.id,
layer->layer_info.h_zoom,
layer->layer_info.v_zoom);
ret = osd_device->ops.set_vid_expansion(osd_device,
layer->layer_info.h_exp,
layer->layer_info.v_exp);
if (ret < 0) {
v4l2_err(&vpbe_dev->v4l2_dev,
"Error in set vid expansion:\n");
return -EINVAL;
}
if ((layer->layer_info.h_zoom != ZOOM_X1) ||
(layer->layer_info.v_zoom != ZOOM_X1) ||
(layer->layer_info.h_exp != H_EXP_OFF) ||
(layer->layer_info.v_exp != V_EXP_OFF))
/* Enable expansion filter */
osd_device->ops.set_interpolation_filter(osd_device, 1);
else
osd_device->ops.set_interpolation_filter(osd_device, 0);
return 0;
}
static int vpbe_display_g_crop(struct file *file, void *priv,
struct v4l2_crop *crop)
{
struct vpbe_fh *fh = file->private_data;
struct vpbe_layer *layer = fh->layer;
struct osd_layer_config *cfg = &layer->layer_info.config;
struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
struct osd_state *osd_device = fh->disp_dev->osd_device;
struct v4l2_rect *rect = &crop->c;
int ret;
v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
"VIDIOC_G_CROP, layer id = %d\n",
layer->device_id);
if (crop->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) {
v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buf type\n");
ret = -EINVAL;
}
osd_device->ops.get_layer_config(osd_device,
layer->layer_info.id, cfg);
rect->top = cfg->ypos;
rect->left = cfg->xpos;
rect->width = cfg->xsize;
rect->height = cfg->ysize;
return 0;
}
static int vpbe_display_cropcap(struct file *file, void *priv,
struct v4l2_cropcap *cropcap)
{
struct vpbe_fh *fh = file->private_data;
struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_CROPCAP ioctl\n");
cropcap->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
cropcap->bounds.left = 0;
cropcap->bounds.top = 0;
cropcap->bounds.width = vpbe_dev->current_timings.xres;
cropcap->bounds.height = vpbe_dev->current_timings.yres;
cropcap->pixelaspect = vpbe_dev->current_timings.aspect;
cropcap->defrect = cropcap->bounds;
return 0;
}
static int vpbe_display_g_fmt(struct file *file, void *priv,
struct v4l2_format *fmt)
{
struct vpbe_fh *fh = file->private_data;
struct vpbe_layer *layer = fh->layer;
struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
"VIDIOC_G_FMT, layer id = %d\n",
layer->device_id);
/* If buffer type is video output */
if (V4L2_BUF_TYPE_VIDEO_OUTPUT != fmt->type) {
v4l2_err(&vpbe_dev->v4l2_dev, "invalid type\n");
return -EINVAL;
}
/* Fill in the information about format */
fmt->fmt.pix = layer->pix_fmt;
return 0;
}
static int vpbe_display_enum_fmt(struct file *file, void *priv,
struct v4l2_fmtdesc *fmt)
{
struct vpbe_fh *fh = file->private_data;
struct vpbe_layer *layer = fh->layer;
struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
unsigned int index = 0;
v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
"VIDIOC_ENUM_FMT, layer id = %d\n",
layer->device_id);
if (fmt->index > 1) {
v4l2_err(&vpbe_dev->v4l2_dev, "Invalid format index\n");
return -EINVAL;
}
/* Fill in the information about format */
index = fmt->index;
memset(fmt, 0, sizeof(*fmt));
fmt->index = index;
fmt->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
if (index == 0) {
strcpy(fmt->description, "YUV 4:2:2 - UYVY");
fmt->pixelformat = V4L2_PIX_FMT_UYVY;
} else {
strcpy(fmt->description, "Y/CbCr 4:2:0");
fmt->pixelformat = V4L2_PIX_FMT_NV12;
}
return 0;
}
static int vpbe_display_s_fmt(struct file *file, void *priv,
struct v4l2_format *fmt)
{
struct vpbe_fh *fh = file->private_data;
struct vpbe_layer *layer = fh->layer;
struct vpbe_display *disp_dev = fh->disp_dev;
struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
struct osd_layer_config *cfg = &layer->layer_info.config;
struct v4l2_pix_format *pixfmt = &fmt->fmt.pix;
struct osd_state *osd_device = disp_dev->osd_device;
int ret;
v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
"VIDIOC_S_FMT, layer id = %d\n",
layer->device_id);
/* If streaming is started, return error */
if (layer->started) {
v4l2_err(&vpbe_dev->v4l2_dev, "Streaming is started\n");
return -EBUSY;
}
if (V4L2_BUF_TYPE_VIDEO_OUTPUT != fmt->type) {
v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "invalid type\n");
return -EINVAL;
}
/* Check for valid pixel format */
ret = vpbe_try_format(disp_dev, pixfmt, 1);
if (ret)
return ret;
/* YUV420 is requested, check availability of the
other video window */
layer->pix_fmt = *pixfmt;
/* Get osd layer config */
osd_device->ops.get_layer_config(osd_device,
layer->layer_info.id, cfg);
/* Store the pixel format in the layer object */
cfg->xsize = pixfmt->width;
cfg->ysize = pixfmt->height;
cfg->line_length = pixfmt->bytesperline;
cfg->ypos = 0;
cfg->xpos = 0;
cfg->interlaced = vpbe_dev->current_timings.interlaced;
if (V4L2_PIX_FMT_UYVY == pixfmt->pixelformat)
cfg->pixfmt = PIXFMT_YCbCrI;
/* Change of the default pixel format for both video windows */
if (V4L2_PIX_FMT_NV12 == pixfmt->pixelformat) {
struct vpbe_layer *otherlayer;
cfg->pixfmt = PIXFMT_NV12;
otherlayer = _vpbe_display_get_other_win_layer(disp_dev,
layer);
otherlayer->layer_info.config.pixfmt = PIXFMT_NV12;
}
/* Set the layer config in the osd window */
ret = osd_device->ops.set_layer_config(osd_device,
layer->layer_info.id, cfg);
if (ret < 0) {
v4l2_err(&vpbe_dev->v4l2_dev,
"Error in S_FMT params:\n");
return -EINVAL;
}
/* Readback and fill the local copy of current pix format */
osd_device->ops.get_layer_config(osd_device,
layer->layer_info.id, cfg);
return 0;
}
static int vpbe_display_try_fmt(struct file *file, void *priv,
struct v4l2_format *fmt)
{
struct vpbe_fh *fh = file->private_data;
struct vpbe_display *disp_dev = fh->disp_dev;
struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
struct v4l2_pix_format *pixfmt = &fmt->fmt.pix;
v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_TRY_FMT\n");
if (V4L2_BUF_TYPE_VIDEO_OUTPUT != fmt->type) {
v4l2_err(&vpbe_dev->v4l2_dev, "invalid type\n");
return -EINVAL;
}
/* Check for valid field format */
return vpbe_try_format(disp_dev, pixfmt, 0);
}
/**
* vpbe_display_s_std - Set the given standard in the encoder
*
* Sets the standard if supported by the current encoder. Return the status.
* 0 - success & -EINVAL on error
*/
static int vpbe_display_s_std(struct file *file, void *priv,
v4l2_std_id *std_id)
{
struct vpbe_fh *fh = priv;
struct vpbe_layer *layer = fh->layer;
struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
int ret;
v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_S_STD\n");
/* If streaming is started, return error */
if (layer->started) {
v4l2_err(&vpbe_dev->v4l2_dev, "Streaming is started\n");
return -EBUSY;
}
if (NULL != vpbe_dev->ops.s_std) {
ret = vpbe_dev->ops.s_std(vpbe_dev, std_id);
if (ret) {
v4l2_err(&vpbe_dev->v4l2_dev,
"Failed to set standard for sub devices\n");
return -EINVAL;
}
} else {
return -EINVAL;
}
return 0;
}
/**
* vpbe_display_g_std - Get the standard in the current encoder
*
* Get the standard in the current encoder. Return the status. 0 - success
* -EINVAL on error
*/
static int vpbe_display_g_std(struct file *file, void *priv,
v4l2_std_id *std_id)
{
struct vpbe_fh *fh = priv;
struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_G_STD\n");
/* Get the standard from the current encoder */
if (vpbe_dev->current_timings.timings_type & VPBE_ENC_STD) {
*std_id = vpbe_dev->current_timings.timings.std_id;
return 0;
}
return -EINVAL;
}
/**
* vpbe_display_enum_output - enumerate outputs
*
* Enumerates the outputs available at the vpbe display
* returns the status, -EINVAL if end of output list
*/
static int vpbe_display_enum_output(struct file *file, void *priv,
struct v4l2_output *output)
{
struct vpbe_fh *fh = priv;
struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
int ret;
v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_ENUM_OUTPUT\n");
/* Enumerate outputs */
if (NULL == vpbe_dev->ops.enum_outputs)
return -EINVAL;
ret = vpbe_dev->ops.enum_outputs(vpbe_dev, output);
if (ret) {
v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
"Failed to enumerate outputs\n");
return -EINVAL;
}
return 0;
}
/**
* vpbe_display_s_output - Set output to
* the output specified by the index
*/
static int vpbe_display_s_output(struct file *file, void *priv,
unsigned int i)
{
struct vpbe_fh *fh = priv;
struct vpbe_layer *layer = fh->layer;
struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
int ret;
v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_S_OUTPUT\n");
/* If streaming is started, return error */
if (layer->started) {
v4l2_err(&vpbe_dev->v4l2_dev, "Streaming is started\n");
return -EBUSY;
}
if (NULL == vpbe_dev->ops.set_output)
return -EINVAL;
ret = vpbe_dev->ops.set_output(vpbe_dev, i);
if (ret) {
v4l2_err(&vpbe_dev->v4l2_dev,
"Failed to set output for sub devices\n");
return -EINVAL;
}
return 0;
}
/**
* vpbe_display_g_output - Get output from subdevice
* for a given by the index
*/
static int vpbe_display_g_output(struct file *file, void *priv,
unsigned int *i)
{
struct vpbe_fh *fh = priv;
struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_G_OUTPUT\n");
/* Get the standard from the current encoder */
*i = vpbe_dev->current_out_index;
return 0;
}
/**
* vpbe_display_enum_dv_presets - Enumerate the dv presets
*
* enum the preset in the current encoder. Return the status. 0 - success
* -EINVAL on error
*/
static int
vpbe_display_enum_dv_presets(struct file *file, void *priv,
struct v4l2_dv_enum_preset *preset)
{
struct vpbe_fh *fh = priv;
struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
int ret;
v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_ENUM_DV_PRESETS\n");
/* Enumerate outputs */
if (NULL == vpbe_dev->ops.enum_dv_presets)
return -EINVAL;
ret = vpbe_dev->ops.enum_dv_presets(vpbe_dev, preset);
if (ret) {
v4l2_err(&vpbe_dev->v4l2_dev,
"Failed to enumerate dv presets info\n");
return -EINVAL;
}
return 0;
}
/**
* vpbe_display_s_dv_preset - Set the dv presets
*
* Set the preset in the current encoder. Return the status. 0 - success
* -EINVAL on error
*/
static int
vpbe_display_s_dv_preset(struct file *file, void *priv,
struct v4l2_dv_preset *preset)
{
struct vpbe_fh *fh = priv;
struct vpbe_layer *layer = fh->layer;
struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
int ret;
v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_S_DV_PRESETS\n");
/* If streaming is started, return error */
if (layer->started) {
v4l2_err(&vpbe_dev->v4l2_dev, "Streaming is started\n");
return -EBUSY;
}
/* Set the given standard in the encoder */
if (NULL != vpbe_dev->ops.s_dv_preset)
return -EINVAL;
ret = vpbe_dev->ops.s_dv_preset(vpbe_dev, preset);
if (ret) {
v4l2_err(&vpbe_dev->v4l2_dev,
"Failed to set the dv presets info\n");
return -EINVAL;
}
/* set the current norm to zero to be consistent. If STD is used
* v4l2 layer will set the norm properly on successful s_std call
*/
layer->video_dev.current_norm = 0;
return 0;
}
/**
* vpbe_display_g_dv_preset - Set the dv presets
*
* Get the preset in the current encoder. Return the status. 0 - success
* -EINVAL on error
*/
static int
vpbe_display_g_dv_preset(struct file *file, void *priv,
struct v4l2_dv_preset *dv_preset)
{
struct vpbe_fh *fh = priv;
struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_G_DV_PRESETS\n");
/* Get the given standard in the encoder */
if (vpbe_dev->current_timings.timings_type &
VPBE_ENC_DV_PRESET) {
dv_preset->preset =
vpbe_dev->current_timings.timings.dv_preset;
} else {
return -EINVAL;
}
return 0;
}
static int vpbe_display_streamoff(struct file *file, void *priv,
enum v4l2_buf_type buf_type)
{
struct vpbe_fh *fh = file->private_data;
struct vpbe_layer *layer = fh->layer;
struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
struct osd_state *osd_device = fh->disp_dev->osd_device;
int ret;
v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
"VIDIOC_STREAMOFF,layer id = %d\n",
layer->device_id);
if (V4L2_BUF_TYPE_VIDEO_OUTPUT != buf_type) {
v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n");
return -EINVAL;
}
/* If io is allowed for this file handle, return error */
if (!fh->io_allowed) {
v4l2_err(&vpbe_dev->v4l2_dev, "No io_allowed\n");
return -EACCES;
}
/* If streaming is not started, return error */
if (!layer->started) {
v4l2_err(&vpbe_dev->v4l2_dev, "streaming not started in layer"
" id = %d\n", layer->device_id);
return -EINVAL;
}
osd_device->ops.disable_layer(osd_device,
layer->layer_info.id);
layer->started = 0;
ret = videobuf_streamoff(&layer->buffer_queue);
return ret;
}
static int vpbe_display_streamon(struct file *file, void *priv,
enum v4l2_buf_type buf_type)
{
struct vpbe_fh *fh = file->private_data;
struct vpbe_layer *layer = fh->layer;
struct vpbe_display *disp_dev = fh->disp_dev;
struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
struct osd_state *osd_device = disp_dev->osd_device;
int ret;
osd_device->ops.disable_layer(osd_device,
layer->layer_info.id);
v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_STREAMON, layerid=%d\n",
layer->device_id);
if (V4L2_BUF_TYPE_VIDEO_OUTPUT != buf_type) {
v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n");
return -EINVAL;
}
/* If file handle is not allowed IO, return error */
if (!fh->io_allowed) {
v4l2_err(&vpbe_dev->v4l2_dev, "No io_allowed\n");
return -EACCES;
}
/* If Streaming is already started, return error */
if (layer->started) {
v4l2_err(&vpbe_dev->v4l2_dev, "layer is already streaming\n");
return -EBUSY;
}
/*
* Call videobuf_streamon to start streaming
* in videobuf
*/
ret = videobuf_streamon(&layer->buffer_queue);
if (ret) {
v4l2_err(&vpbe_dev->v4l2_dev,
"error in videobuf_streamon\n");
return ret;
}
/* If buffer queue is empty, return error */
if (list_empty(&layer->dma_queue)) {
v4l2_err(&vpbe_dev->v4l2_dev, "buffer queue is empty\n");
goto streamoff;
}
/* Get the next frame from the buffer queue */
layer->next_frm = layer->cur_frm = list_entry(layer->dma_queue.next,
struct videobuf_buffer, queue);
/* Remove buffer from the buffer queue */
list_del(&layer->cur_frm->queue);
/* Mark state of the current frame to active */
layer->cur_frm->state = VIDEOBUF_ACTIVE;
/* Initialize field_id and started member */
layer->field_id = 0;
/* Set parameters in OSD and VENC */
ret = vpbe_set_osd_display_params(disp_dev, layer);
if (ret < 0)
goto streamoff;
/*
* if request format is yuv420 semiplanar, need to
* enable both video windows
*/
layer->started = 1;
layer->layer_first_int = 1;
return ret;
streamoff:
ret = videobuf_streamoff(&layer->buffer_queue);
return ret;
}
static int vpbe_display_dqbuf(struct file *file, void *priv,
struct v4l2_buffer *buf)
{
struct vpbe_fh *fh = file->private_data;
struct vpbe_layer *layer = fh->layer;
struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
int ret;
v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
"VIDIOC_DQBUF, layer id = %d\n",
layer->device_id);
if (V4L2_BUF_TYPE_VIDEO_OUTPUT != buf->type) {
v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n");
return -EINVAL;
}
/* If this file handle is not allowed to do IO, return error */
if (!fh->io_allowed) {
v4l2_err(&vpbe_dev->v4l2_dev, "No io_allowed\n");
return -EACCES;
}
if (file->f_flags & O_NONBLOCK)
/* Call videobuf_dqbuf for non blocking mode */
ret = videobuf_dqbuf(&layer->buffer_queue, buf, 1);
else
/* Call videobuf_dqbuf for blocking mode */
ret = videobuf_dqbuf(&layer->buffer_queue, buf, 0);
return ret;
}
static int vpbe_display_qbuf(struct file *file, void *priv,
struct v4l2_buffer *p)
{
struct vpbe_fh *fh = file->private_data;
struct vpbe_layer *layer = fh->layer;
struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
"VIDIOC_QBUF, layer id = %d\n",
layer->device_id);
if (V4L2_BUF_TYPE_VIDEO_OUTPUT != p->type) {
v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n");
return -EINVAL;
}
/* If this file handle is not allowed to do IO, return error */
if (!fh->io_allowed) {
v4l2_err(&vpbe_dev->v4l2_dev, "No io_allowed\n");
return -EACCES;
}
return videobuf_qbuf(&layer->buffer_queue, p);
}
static int vpbe_display_querybuf(struct file *file, void *priv,
struct v4l2_buffer *buf)
{
struct vpbe_fh *fh = file->private_data;
struct vpbe_layer *layer = fh->layer;
struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
int ret;
v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
"VIDIOC_QUERYBUF, layer id = %d\n",
layer->device_id);
if (V4L2_BUF_TYPE_VIDEO_OUTPUT != buf->type) {
v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n");
return -EINVAL;
}
/* Call videobuf_querybuf to get information */
ret = videobuf_querybuf(&layer->buffer_queue, buf);
return ret;
}
static int vpbe_display_reqbufs(struct file *file, void *priv,
struct v4l2_requestbuffers *req_buf)
{
struct vpbe_fh *fh = file->private_data;
struct vpbe_layer *layer = fh->layer;
struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
int ret;
v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_reqbufs\n");
if (V4L2_BUF_TYPE_VIDEO_OUTPUT != req_buf->type) {
v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n");
return -EINVAL;
}
/* If io users of the layer is not zero, return error */
if (0 != layer->io_usrs) {
v4l2_err(&vpbe_dev->v4l2_dev, "not IO user\n");
return -EBUSY;
}
/* Initialize videobuf queue as per the buffer type */
videobuf_queue_dma_contig_init(&layer->buffer_queue,
&video_qops,
vpbe_dev->pdev,
&layer->irqlock,
V4L2_BUF_TYPE_VIDEO_OUTPUT,
layer->pix_fmt.field,
sizeof(struct videobuf_buffer),
fh, NULL);
/* Set io allowed member of file handle to TRUE */
fh->io_allowed = 1;
/* Increment io usrs member of layer object to 1 */
layer->io_usrs = 1;
/* Store type of memory requested in layer object */
layer->memory = req_buf->memory;
/* Initialize buffer queue */
INIT_LIST_HEAD(&layer->dma_queue);
/* Allocate buffers */
ret = videobuf_reqbufs(&layer->buffer_queue, req_buf);
return ret;
}
/*
* vpbe_display_mmap()
* It is used to map kernel space buffers into user spaces
*/
static int vpbe_display_mmap(struct file *filep, struct vm_area_struct *vma)
{
/* Get the layer object and file handle object */
struct vpbe_fh *fh = filep->private_data;
struct vpbe_layer *layer = fh->layer;
struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_mmap\n");
return videobuf_mmap_mapper(&layer->buffer_queue, vma);
}
/* vpbe_display_poll(): It is used for select/poll system call
*/
static unsigned int vpbe_display_poll(struct file *filep, poll_table *wait)
{
struct vpbe_fh *fh = filep->private_data;
struct vpbe_layer *layer = fh->layer;
struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
unsigned int err = 0;
v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_poll\n");
if (layer->started)
err = videobuf_poll_stream(filep, &layer->buffer_queue, wait);
return err;
}
/*
* vpbe_display_open()
* It creates object of file handle structure and stores it in private_data
* member of filepointer
*/
static int vpbe_display_open(struct file *file)
{
struct vpbe_fh *fh = NULL;
struct vpbe_layer *layer = video_drvdata(file);
struct vpbe_display *disp_dev = layer->disp_dev;
struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
struct osd_state *osd_device = disp_dev->osd_device;
int err;
/* Allocate memory for the file handle object */
fh = kmalloc(sizeof(struct vpbe_fh), GFP_KERNEL);
if (fh == NULL) {
v4l2_err(&vpbe_dev->v4l2_dev,
"unable to allocate memory for file handle object\n");
return -ENOMEM;
}
v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
"vpbe display open plane = %d\n",
layer->device_id);
/* store pointer to fh in private_data member of filep */
file->private_data = fh;
fh->layer = layer;
fh->disp_dev = disp_dev;
if (!layer->usrs) {
/* First claim the layer for this device */
err = osd_device->ops.request_layer(osd_device,
layer->layer_info.id);
if (err < 0) {
/* Couldn't get layer */
v4l2_err(&vpbe_dev->v4l2_dev,
"Display Manager failed to allocate layer\n");
kfree(fh);
return -EINVAL;
}
}
/* Increment layer usrs counter */
layer->usrs++;
/* Set io_allowed member to false */
fh->io_allowed = 0;
/* Initialize priority of this instance to default priority */
fh->prio = V4L2_PRIORITY_UNSET;
v4l2_prio_open(&layer->prio, &fh->prio);
v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
"vpbe display device opened successfully\n");
return 0;
}
/*
* vpbe_display_release()
* This function deletes buffer queue, frees the buffers and the davinci
* display file * handle
*/
static int vpbe_display_release(struct file *file)
{
/* Get the layer object and file handle object */
struct vpbe_fh *fh = file->private_data;
struct vpbe_layer *layer = fh->layer;
struct osd_layer_config *cfg = &layer->layer_info.config;
struct vpbe_display *disp_dev = fh->disp_dev;
struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
struct osd_state *osd_device = disp_dev->osd_device;
v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_release\n");
/* if this instance is doing IO */
if (fh->io_allowed) {
/* Reset io_usrs member of layer object */
layer->io_usrs = 0;
osd_device->ops.disable_layer(osd_device,
layer->layer_info.id);
layer->started = 0;
/* Free buffers allocated */
videobuf_queue_cancel(&layer->buffer_queue);
videobuf_mmap_free(&layer->buffer_queue);
}
/* Decrement layer usrs counter */
layer->usrs--;
/* If this file handle has initialize encoder device, reset it */
if (!layer->usrs) {
if (cfg->pixfmt == PIXFMT_NV12) {
struct vpbe_layer *otherlayer;
otherlayer =
_vpbe_display_get_other_win_layer(disp_dev, layer);
osd_device->ops.disable_layer(osd_device,
otherlayer->layer_info.id);
osd_device->ops.release_layer(osd_device,
otherlayer->layer_info.id);
}
osd_device->ops.disable_layer(osd_device,
layer->layer_info.id);
osd_device->ops.release_layer(osd_device,
layer->layer_info.id);
}
/* Close the priority */
v4l2_prio_close(&layer->prio, fh->prio);
file->private_data = NULL;
/* Free memory allocated to file handle object */
kfree(fh);
disp_dev->cbcr_ofst = 0;
return 0;
}
#ifdef CONFIG_VIDEO_ADV_DEBUG
static int vpbe_display_g_register(struct file *file, void *priv,
struct v4l2_dbg_register *reg)
{
struct v4l2_dbg_match *match = &reg->match;
if (match->type >= 2) {
v4l2_subdev_call(vpbe_dev->venc,
core,
g_register,
reg);
}
return 0;
}
static int vpbe_display_s_register(struct file *file, void *priv,
struct v4l2_dbg_register *reg)
{
return 0;
}
#endif
/* vpbe capture ioctl operations */
static const struct v4l2_ioctl_ops vpbe_ioctl_ops = {
.vidioc_querycap = vpbe_display_querycap,
.vidioc_g_fmt_vid_out = vpbe_display_g_fmt,
.vidioc_enum_fmt_vid_out = vpbe_display_enum_fmt,
.vidioc_s_fmt_vid_out = vpbe_display_s_fmt,
.vidioc_try_fmt_vid_out = vpbe_display_try_fmt,
.vidioc_reqbufs = vpbe_display_reqbufs,
.vidioc_querybuf = vpbe_display_querybuf,
.vidioc_qbuf = vpbe_display_qbuf,
.vidioc_dqbuf = vpbe_display_dqbuf,
.vidioc_streamon = vpbe_display_streamon,
.vidioc_streamoff = vpbe_display_streamoff,
.vidioc_cropcap = vpbe_display_cropcap,
.vidioc_g_crop = vpbe_display_g_crop,
.vidioc_s_crop = vpbe_display_s_crop,
.vidioc_g_priority = vpbe_display_g_priority,
.vidioc_s_priority = vpbe_display_s_priority,
.vidioc_s_std = vpbe_display_s_std,
.vidioc_g_std = vpbe_display_g_std,
.vidioc_enum_output = vpbe_display_enum_output,
.vidioc_s_output = vpbe_display_s_output,
.vidioc_g_output = vpbe_display_g_output,
.vidioc_s_dv_preset = vpbe_display_s_dv_preset,
.vidioc_g_dv_preset = vpbe_display_g_dv_preset,
.vidioc_enum_dv_presets = vpbe_display_enum_dv_presets,
#ifdef CONFIG_VIDEO_ADV_DEBUG
.vidioc_g_register = vpbe_display_g_register,
.vidioc_s_register = vpbe_display_s_register,
#endif
};
static struct v4l2_file_operations vpbe_fops = {
.owner = THIS_MODULE,
.open = vpbe_display_open,
.release = vpbe_display_release,
.unlocked_ioctl = video_ioctl2,
.mmap = vpbe_display_mmap,
.poll = vpbe_display_poll
};
static int vpbe_device_get(struct device *dev, void *data)
{
struct platform_device *pdev = to_platform_device(dev);
struct vpbe_display *vpbe_disp = data;
if (strcmp("vpbe_controller", pdev->name) == 0)
vpbe_disp->vpbe_dev = platform_get_drvdata(pdev);
if (strcmp("vpbe-osd", pdev->name) == 0)
vpbe_disp->osd_device = platform_get_drvdata(pdev);
return 0;
}
static __devinit int init_vpbe_layer(int i, struct vpbe_display *disp_dev,
struct platform_device *pdev)
{
struct vpbe_layer *vpbe_display_layer = NULL;
struct video_device *vbd = NULL;
/* Allocate memory for four plane display objects */
disp_dev->dev[i] =
kzalloc(sizeof(struct vpbe_layer), GFP_KERNEL);
/* If memory allocation fails, return error */
if (!disp_dev->dev[i]) {
printk(KERN_ERR "ran out of memory\n");
return -ENOMEM;
}
spin_lock_init(&disp_dev->dev[i]->irqlock);
mutex_init(&disp_dev->dev[i]->opslock);
/* Get the pointer to the layer object */
vpbe_display_layer = disp_dev->dev[i];
vbd = &vpbe_display_layer->video_dev;
/* Initialize field of video device */
vbd->release = video_device_release_empty;
vbd->fops = &vpbe_fops;
vbd->ioctl_ops = &vpbe_ioctl_ops;
vbd->minor = -1;
vbd->v4l2_dev = &disp_dev->vpbe_dev->v4l2_dev;
/* Locking in file operations other than ioctl should be done
by the driver, not the V4L2 core.
This driver needs auditing so that this flag can be removed. */
set_bit(V4L2_FL_LOCK_ALL_FOPS, &vbd->flags);
vbd->lock = &vpbe_display_layer->opslock;
if (disp_dev->vpbe_dev->current_timings.timings_type &
VPBE_ENC_STD) {
vbd->tvnorms = (V4L2_STD_525_60 | V4L2_STD_625_50);
vbd->current_norm =
disp_dev->vpbe_dev->
current_timings.timings.std_id;
} else
vbd->current_norm = 0;
snprintf(vbd->name, sizeof(vbd->name),
"DaVinci_VPBE Display_DRIVER_V%d.%d.%d",
(VPBE_DISPLAY_VERSION_CODE >> 16) & 0xff,
(VPBE_DISPLAY_VERSION_CODE >> 8) & 0xff,
(VPBE_DISPLAY_VERSION_CODE) & 0xff);
vpbe_display_layer->device_id = i;
vpbe_display_layer->layer_info.id =
((i == VPBE_DISPLAY_DEVICE_0) ? WIN_VID0 : WIN_VID1);
/* Initialize prio member of layer object */
v4l2_prio_init(&vpbe_display_layer->prio);
return 0;
}
static __devinit int register_device(struct vpbe_layer *vpbe_display_layer,
struct vpbe_display *disp_dev,
struct platform_device *pdev) {
int err;
v4l2_info(&disp_dev->vpbe_dev->v4l2_dev,
"Trying to register VPBE display device.\n");
v4l2_info(&disp_dev->vpbe_dev->v4l2_dev,
"layer=%x,layer->video_dev=%x\n",
(int)vpbe_display_layer,
(int)&vpbe_display_layer->video_dev);
err = video_register_device(&vpbe_display_layer->video_dev,
VFL_TYPE_GRABBER,
-1);
if (err)
return -ENODEV;
vpbe_display_layer->disp_dev = disp_dev;
/* set the driver data in platform device */
platform_set_drvdata(pdev, disp_dev);
video_set_drvdata(&vpbe_display_layer->video_dev,
vpbe_display_layer);
return 0;
}
/*
* vpbe_display_probe()
* This function creates device entries by register itself to the V4L2 driver
* and initializes fields of each layer objects
*/
static __devinit int vpbe_display_probe(struct platform_device *pdev)
{
struct vpbe_layer *vpbe_display_layer;
struct vpbe_display *disp_dev;
struct resource *res = NULL;
int k;
int i;
int err;
int irq;
printk(KERN_DEBUG "vpbe_display_probe\n");
/* Allocate memory for vpbe_display */
disp_dev = kzalloc(sizeof(struct vpbe_display), GFP_KERNEL);
if (!disp_dev) {
printk(KERN_ERR "ran out of memory\n");
return -ENOMEM;
}
spin_lock_init(&disp_dev->dma_queue_lock);
/*
* Scan all the platform devices to find the vpbe
* controller device and get the vpbe_dev object
*/
err = bus_for_each_dev(&platform_bus_type, NULL, disp_dev,
vpbe_device_get);
if (err < 0)
return err;
/* Initialize the vpbe display controller */
if (NULL != disp_dev->vpbe_dev->ops.initialize) {
err = disp_dev->vpbe_dev->ops.initialize(&pdev->dev,
disp_dev->vpbe_dev);
if (err) {
v4l2_err(&disp_dev->vpbe_dev->v4l2_dev,
"Error initing vpbe\n");
err = -ENOMEM;
goto probe_out;
}
}
for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) {
if (init_vpbe_layer(i, disp_dev, pdev)) {
err = -ENODEV;
goto probe_out;
}
}
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!res) {
v4l2_err(&disp_dev->vpbe_dev->v4l2_dev,
"Unable to get VENC interrupt resource\n");
err = -ENODEV;
goto probe_out;
}
irq = res->start;
if (request_irq(irq, venc_isr, IRQF_DISABLED, VPBE_DISPLAY_DRIVER,
disp_dev)) {
v4l2_err(&disp_dev->vpbe_dev->v4l2_dev,
"Unable to request interrupt\n");
err = -ENODEV;
goto probe_out;
}
for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) {
if (register_device(disp_dev->dev[i], disp_dev, pdev)) {
err = -ENODEV;
goto probe_out_irq;
}
}
printk(KERN_DEBUG "Successfully completed the probing of vpbe v4l2 device\n");
return 0;
probe_out_irq:
free_irq(res->start, disp_dev);
probe_out:
for (k = 0; k < VPBE_DISPLAY_MAX_DEVICES; k++) {
/* Get the pointer to the layer object */
vpbe_display_layer = disp_dev->dev[k];
/* Unregister video device */
if (vpbe_display_layer) {
video_unregister_device(
&vpbe_display_layer->video_dev);
kfree(disp_dev->dev[k]);
}
}
kfree(disp_dev);
return err;
}
/*
* vpbe_display_remove()
* It un-register hardware layer from V4L2 driver
*/
static int vpbe_display_remove(struct platform_device *pdev)
{
struct vpbe_layer *vpbe_display_layer;
struct vpbe_display *disp_dev = platform_get_drvdata(pdev);
struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
struct resource *res;
int i;
v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_remove\n");
/* unregister irq */
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
free_irq(res->start, disp_dev);
/* deinitialize the vpbe display controller */
if (NULL != vpbe_dev->ops.deinitialize)
vpbe_dev->ops.deinitialize(&pdev->dev, vpbe_dev);
/* un-register device */
for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) {
/* Get the pointer to the layer object */
vpbe_display_layer = disp_dev->dev[i];
/* Unregister video device */
video_unregister_device(&vpbe_display_layer->video_dev);
}
for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) {
kfree(disp_dev->dev[i]);
disp_dev->dev[i] = NULL;
}
return 0;
}
static struct platform_driver vpbe_display_driver = {
.driver = {
.name = VPBE_DISPLAY_DRIVER,
.owner = THIS_MODULE,
.bus = &platform_bus_type,
},
.probe = vpbe_display_probe,
.remove = __devexit_p(vpbe_display_remove),
};
module_platform_driver(vpbe_display_driver);
MODULE_DESCRIPTION("TI DM644x/DM355/DM365 VPBE Display controller");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Texas Instruments");
Reference in New Issue View Git Blame Copy Permalink