linux/arch/sparc/kernel/helpers.S
David S. Miller 954fbc8985 sparc64: Implement perf_arch_fetch_caller_regs
We provide regs->tstate, regs->tpc, regs->tnpc and
regs->u_regs[UREG_FP].

regs->tstate is necessary for:

	user_mode()		(via perf_exclude_event())

	perf_misc_flags()	(via perf_prepare_sample())

regs->tpc is necessary for:

	perf_instruction_pointer() (via perf_prepare_sample())

and regs->u_regs[UREG_FP] is necessary for:

	perf_callchain()	(via perf_prepare_sample())

The regs->tnpc value is provided just to be tidy.

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03 23:50:59 -07:00

139 lines
3.2 KiB
ArmAsm

.align 32
.globl __flushw_user
.type __flushw_user,#function
__flushw_user:
rdpr %otherwin, %g1
brz,pn %g1, 2f
clr %g2
1: save %sp, -128, %sp
rdpr %otherwin, %g1
brnz,pt %g1, 1b
add %g2, 1, %g2
1: sub %g2, 1, %g2
brnz,pt %g2, 1b
restore %g0, %g0, %g0
2: retl
nop
.size __flushw_user,.-__flushw_user
/* Flush %fp and %i7 to the stack for all register
* windows active inside of the cpu. This allows
* show_stack_trace() to avoid using an expensive
* 'flushw'.
*/
.globl stack_trace_flush
.type stack_trace_flush,#function
stack_trace_flush:
rdpr %pstate, %o0
wrpr %o0, PSTATE_IE, %pstate
rdpr %cwp, %g1
rdpr %canrestore, %g2
sub %g1, 1, %g3
1: brz,pn %g2, 2f
sub %g2, 1, %g2
wrpr %g3, %cwp
stx %fp, [%sp + STACK_BIAS + RW_V9_I6]
stx %i7, [%sp + STACK_BIAS + RW_V9_I7]
ba,pt %xcc, 1b
sub %g3, 1, %g3
2: wrpr %g1, %cwp
wrpr %o0, %pstate
retl
nop
.size stack_trace_flush,.-stack_trace_flush
#ifdef CONFIG_PERF_EVENTS
.globl perf_arch_fetch_caller_regs
.type perf_arch_fetch_caller_regs,#function
perf_arch_fetch_caller_regs:
/* We always read the %pstate into %o5 since we will use
* that to construct a fake %tstate to store into the regs.
*/
rdpr %pstate, %o5
brz,pn %o2, 50f
mov %o2, %g7
/* Turn off interrupts while we walk around the register
* window by hand.
*/
wrpr %o5, PSTATE_IE, %pstate
/* The %canrestore tells us how many register windows are
* still live in the chip above us, past that we have to
* walk the frame as saved on the stack. We stash away
* the %cwp in %g1 so we can return back to the original
* register window.
*/
rdpr %cwp, %g1
rdpr %canrestore, %g2
sub %g1, 1, %g3
/* We have the skip count in %g7, if it hits zero then
* %fp/%i7 are the registers we need. Otherwise if our
* %canrestore count maintained in %g2 hits zero we have
* to start traversing the stack.
*/
10: brz,pn %g2, 4f
sub %g2, 1, %g2
wrpr %g3, %cwp
subcc %g7, 1, %g7
bne,pt %xcc, 10b
sub %g3, 1, %g3
/* We found the values we need in the cpu's register
* windows.
*/
mov %fp, %g3
ba,pt %xcc, 3f
mov %i7, %g2
50: mov %fp, %g3
ba,pt %xcc, 2f
mov %i7, %g2
/* We hit the end of the valid register windows in the
* cpu, start traversing the stack frame.
*/
4: mov %fp, %g3
20: ldx [%g3 + STACK_BIAS + RW_V9_I7], %g2
subcc %g7, 1, %g7
bne,pn %xcc, 20b
ldx [%g3 + STACK_BIAS + RW_V9_I6], %g3
/* Restore the current register window position and
* re-enable interrupts.
*/
3: wrpr %g1, %cwp
wrpr %o5, %pstate
2: stx %g3, [%o0 + PT_V9_FP]
sllx %o5, 8, %o5
stx %o5, [%o0 + PT_V9_TSTATE]
stx %g2, [%o0 + PT_V9_TPC]
add %g2, 4, %g2
retl
stx %g2, [%o0 + PT_V9_TNPC]
.size perf_arch_fetch_caller_regs,.-perf_arch_fetch_caller_regs
#endif /* CONFIG_PERF_EVENTS */
#ifdef CONFIG_SMP
.globl hard_smp_processor_id
.type hard_smp_processor_id,#function
hard_smp_processor_id:
#endif
.globl real_hard_smp_processor_id
.type real_hard_smp_processor_id,#function
real_hard_smp_processor_id:
__GET_CPUID(%o0)
retl
nop
#ifdef CONFIG_SMP
.size hard_smp_processor_id,.-hard_smp_processor_id
#endif
.size real_hard_smp_processor_id,.-real_hard_smp_processor_id