forked from Minki/linux
894b73834a
Add pinmux for UART_A RTS, CTS pin's. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
336 lines
7.6 KiB
Plaintext
336 lines
7.6 KiB
Plaintext
/*
|
|
* Copyright 2014 Toradex AG
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This file is distributed in the hope that it will be useful
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* Or, alternatively
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
/ {
|
|
bl: backlight {
|
|
compatible = "pwm-backlight";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_gpio_bl_on>;
|
|
pwms = <&pwm0 0 5000000 0>;
|
|
enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
reg_module_3v3: regulator-module-3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "+V3.3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
reg_module_3v3_avdd: regulator-module-3v3-avdd {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "+V3.3_AVDD_AUDIO";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
&adc0 {
|
|
status = "okay";
|
|
vref-supply = <®_module_3v3_avdd>;
|
|
};
|
|
|
|
&adc1 {
|
|
status = "okay";
|
|
vref-supply = <®_module_3v3_avdd>;
|
|
};
|
|
|
|
&can0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_flexcan0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&can1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_flexcan1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&clks {
|
|
assigned-clocks = <&clks VF610_CLK_ENET_SEL>,
|
|
<&clks VF610_CLK_ENET_TS_SEL>;
|
|
assigned-clock-parents = <&clks VF610_CLK_ENET_50M>,
|
|
<&clks VF610_CLK_ENET_50M>;
|
|
};
|
|
|
|
&dspi1 {
|
|
bus-num = <1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_dspi1>;
|
|
};
|
|
|
|
&edma0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&esdhc1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_esdhc1>;
|
|
bus-width = <4>;
|
|
cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
|
|
disable-wp;
|
|
};
|
|
|
|
&fec1 {
|
|
phy-mode = "rmii";
|
|
phy-supply = <®_module_3v3>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_fec1>;
|
|
};
|
|
|
|
&i2c0 {
|
|
clock-frequency = <400000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c0>;
|
|
};
|
|
|
|
&nfc {
|
|
assigned-clocks = <&clks VF610_CLK_NFC>;
|
|
assigned-clock-rates = <33000000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_nfc>;
|
|
status = "okay";
|
|
|
|
nand@0 {
|
|
compatible = "fsl,vf610-nfc-nandcs";
|
|
reg = <0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
nand-bus-width = <8>;
|
|
nand-ecc-mode = "hw";
|
|
nand-ecc-strength = <32>;
|
|
nand-ecc-step-size = <2048>;
|
|
nand-on-flash-bbt;
|
|
};
|
|
};
|
|
|
|
&pwm0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pwm0>;
|
|
};
|
|
|
|
&pwm1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pwm1>;
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart0>;
|
|
};
|
|
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
|
};
|
|
|
|
&uart2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart2>;
|
|
};
|
|
|
|
&usbdev0 {
|
|
disable-over-current;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbh1 {
|
|
disable-over-current;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbmisc0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbmisc1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbphy0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbphy1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&iomuxc {
|
|
vf610-colibri {
|
|
pinctrl_flexcan0: can0grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTB14__CAN0_RX 0x31F1
|
|
VF610_PAD_PTB15__CAN0_TX 0x31F2
|
|
>;
|
|
};
|
|
|
|
pinctrl_flexcan1: can1grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTB16__CAN1_RX 0x31F1
|
|
VF610_PAD_PTB17__CAN1_TX 0x31F2
|
|
>;
|
|
};
|
|
|
|
pinctrl_gpio_ext: gpio_ext {
|
|
fsl,pins = <
|
|
VF610_PAD_PTD10__GPIO_89 0x22ed /* EXT_IO_0 */
|
|
VF610_PAD_PTD9__GPIO_88 0x22ed /* EXT_IO_1 */
|
|
VF610_PAD_PTD26__GPIO_68 0x22ed /* EXT_IO_2 */
|
|
>;
|
|
};
|
|
|
|
pinctrl_dspi1: dspi1grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTD5__DSPI1_CS0 0x33e2
|
|
VF610_PAD_PTD6__DSPI1_SIN 0x33e1
|
|
VF610_PAD_PTD7__DSPI1_SOUT 0x33e2
|
|
VF610_PAD_PTD8__DSPI1_SCK 0x33e2
|
|
>;
|
|
};
|
|
|
|
pinctrl_esdhc1: esdhc1grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
|
|
VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
|
|
VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
|
|
VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
|
|
VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
|
|
VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
|
|
VF610_PAD_PTB20__GPIO_42 0x219d
|
|
>;
|
|
};
|
|
|
|
pinctrl_fec1: fec1grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTA6__RMII_CLKOUT 0x30d2
|
|
VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
|
|
VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
|
|
VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
|
|
VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1
|
|
VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
|
|
VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
|
|
VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
|
|
VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
|
|
VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
|
|
>;
|
|
};
|
|
|
|
pinctrl_gpio_bl_on: gpio_bl_on {
|
|
fsl,pins = <
|
|
VF610_PAD_PTC0__GPIO_45 0x22ef
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c0: i2c0grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTB14__I2C0_SCL 0x37ff
|
|
VF610_PAD_PTB15__I2C0_SDA 0x37ff
|
|
>;
|
|
};
|
|
|
|
pinctrl_nfc: nfcgrp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTD23__NF_IO7 0x28df
|
|
VF610_PAD_PTD22__NF_IO6 0x28df
|
|
VF610_PAD_PTD21__NF_IO5 0x28df
|
|
VF610_PAD_PTD20__NF_IO4 0x28df
|
|
VF610_PAD_PTD19__NF_IO3 0x28df
|
|
VF610_PAD_PTD18__NF_IO2 0x28df
|
|
VF610_PAD_PTD17__NF_IO1 0x28df
|
|
VF610_PAD_PTD16__NF_IO0 0x28df
|
|
VF610_PAD_PTB24__NF_WE_B 0x28c2
|
|
VF610_PAD_PTB25__NF_CE0_B 0x28c2
|
|
VF610_PAD_PTB27__NF_RE_B 0x28c2
|
|
VF610_PAD_PTC26__NF_RB_B 0x283d
|
|
VF610_PAD_PTC27__NF_ALE 0x28c2
|
|
VF610_PAD_PTC28__NF_CLE 0x28c2
|
|
>;
|
|
};
|
|
|
|
pinctrl_pwm0: pwm0grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTB0__FTM0_CH0 0x1182
|
|
VF610_PAD_PTB1__FTM0_CH1 0x1182
|
|
>;
|
|
};
|
|
|
|
pinctrl_pwm1: pwm1grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTB8__FTM1_CH0 0x1182
|
|
VF610_PAD_PTB9__FTM1_CH1 0x1182
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart0: uart0grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTB10__UART0_TX 0x21a2
|
|
VF610_PAD_PTB11__UART0_RX 0x21a1
|
|
VF610_PAD_PTB12__UART0_RTS 0x21a2
|
|
VF610_PAD_PTB13__UART0_CTS 0x21a1
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart1: uart1grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTB4__UART1_TX 0x21a2
|
|
VF610_PAD_PTB5__UART1_RX 0x21a1
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart2: uart2grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTD0__UART2_TX 0x21a2
|
|
VF610_PAD_PTD1__UART2_RX 0x21a1
|
|
VF610_PAD_PTD2__UART2_RTS 0x21a2
|
|
VF610_PAD_PTD3__UART2_CTS 0x21a1
|
|
>;
|
|
};
|
|
|
|
pinctrl_usbh1_reg: gpio_usb_vbus {
|
|
fsl,pins = <
|
|
VF610_PAD_PTD4__GPIO_83 0x22ed
|
|
>;
|
|
};
|
|
};
|
|
};
|