forked from Minki/linux
2956b5d94a
Currently we already have two pin configuration related callbacks available for GPIO chips .set_single_ended() and .set_debounce(). In future we expect to have even more, which does not scale well if we need to add yet another callback to the GPIO chip structure for each possible configuration parameter. Better solution is to reuse what we already have available in the generic pinconf. To support this, we introduce a new .set_config() callback for GPIO chips. The callback takes a single packed pin configuration value as parameter. This can then be extended easily beyond what is currently supported by just adding new types to the generic pinconf enum. If the GPIO driver is backed up by a pinctrl driver the GPIO driver can just assign gpiochip_generic_config() (introduced in this patch) to .set_config and that will take care configuration requests are directed to the pinctrl driver. We then convert the existing drivers over .set_config() and finally remove the .set_single_ended() and .set_debounce() callbacks. Suggested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
472 lines
12 KiB
C
472 lines
12 KiB
C
/*
|
|
* Intel Whiskey Cove PMIC GPIO Driver
|
|
*
|
|
* This driver is written based on gpio-crystalcove.c
|
|
*
|
|
* Copyright (C) 2016 Intel Corporation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License version
|
|
* 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/module.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/mfd/intel_soc_pmic.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/seq_file.h>
|
|
|
|
/*
|
|
* Whiskey Cove PMIC has 13 physical GPIO pins divided into 3 banks:
|
|
* Bank 0: Pin 0 - 6
|
|
* Bank 1: Pin 7 - 10
|
|
* Bank 2: Pin 11 -12
|
|
* Each pin has one output control register and one input control register.
|
|
*/
|
|
#define BANK0_NR_PINS 7
|
|
#define BANK1_NR_PINS 4
|
|
#define BANK2_NR_PINS 2
|
|
#define WCOVE_GPIO_NUM (BANK0_NR_PINS + BANK1_NR_PINS + BANK2_NR_PINS)
|
|
#define WCOVE_VGPIO_NUM 94
|
|
/* GPIO output control registers (one per pin): 0x4e44 - 0x4e50 */
|
|
#define GPIO_OUT_CTRL_BASE 0x4e44
|
|
/* GPIO input control registers (one per pin): 0x4e51 - 0x4e5d */
|
|
#define GPIO_IN_CTRL_BASE 0x4e51
|
|
|
|
/*
|
|
* GPIO interrupts are organized in two groups:
|
|
* Group 0: Bank 0 pins (Pin 0 - 6)
|
|
* Group 1: Bank 1 and Bank 2 pins (Pin 7 - 12)
|
|
* Each group has two registers (one bit per pin): status and mask.
|
|
*/
|
|
#define GROUP0_NR_IRQS 7
|
|
#define GROUP1_NR_IRQS 6
|
|
#define IRQ_MASK_BASE 0x4e19
|
|
#define IRQ_STATUS_BASE 0x4e0b
|
|
#define UPDATE_IRQ_TYPE BIT(0)
|
|
#define UPDATE_IRQ_MASK BIT(1)
|
|
|
|
#define CTLI_INTCNT_DIS (0 << 1)
|
|
#define CTLI_INTCNT_NE (1 << 1)
|
|
#define CTLI_INTCNT_PE (2 << 1)
|
|
#define CTLI_INTCNT_BE (3 << 1)
|
|
|
|
#define CTLO_DIR_IN (0 << 5)
|
|
#define CTLO_DIR_OUT (1 << 5)
|
|
|
|
#define CTLO_DRV_MASK (1 << 4)
|
|
#define CTLO_DRV_OD (0 << 4)
|
|
#define CTLO_DRV_CMOS (1 << 4)
|
|
|
|
#define CTLO_DRV_REN (1 << 3)
|
|
|
|
#define CTLO_RVAL_2KDOWN (0 << 1)
|
|
#define CTLO_RVAL_2KUP (1 << 1)
|
|
#define CTLO_RVAL_50KDOWN (2 << 1)
|
|
#define CTLO_RVAL_50KUP (3 << 1)
|
|
|
|
#define CTLO_INPUT_SET (CTLO_DRV_CMOS | CTLO_DRV_REN | CTLO_RVAL_2KUP)
|
|
#define CTLO_OUTPUT_SET (CTLO_DIR_OUT | CTLO_INPUT_SET)
|
|
|
|
enum ctrl_register {
|
|
CTRL_IN,
|
|
CTRL_OUT,
|
|
};
|
|
|
|
/*
|
|
* struct wcove_gpio - Whiskey Cove GPIO controller
|
|
* @buslock: for bus lock/sync and unlock.
|
|
* @chip: the abstract gpio_chip structure.
|
|
* @dev: the gpio device
|
|
* @regmap: the regmap from the parent device.
|
|
* @regmap_irq_chip: the regmap of the gpio irq chip.
|
|
* @update: pending IRQ setting update, to be written to the chip upon unlock.
|
|
* @intcnt: the Interrupt Detect value to be written.
|
|
* @set_irq_mask: true if the IRQ mask needs to be set, false to clear.
|
|
*/
|
|
struct wcove_gpio {
|
|
struct mutex buslock;
|
|
struct gpio_chip chip;
|
|
struct device *dev;
|
|
struct regmap *regmap;
|
|
struct regmap_irq_chip_data *regmap_irq_chip;
|
|
int update;
|
|
int intcnt;
|
|
bool set_irq_mask;
|
|
};
|
|
|
|
static inline unsigned int to_reg(int gpio, enum ctrl_register reg_type)
|
|
{
|
|
unsigned int reg;
|
|
int bank;
|
|
|
|
if (gpio < BANK0_NR_PINS)
|
|
bank = 0;
|
|
else if (gpio < BANK0_NR_PINS + BANK1_NR_PINS)
|
|
bank = 1;
|
|
else
|
|
bank = 2;
|
|
|
|
if (reg_type == CTRL_IN)
|
|
reg = GPIO_IN_CTRL_BASE + bank;
|
|
else
|
|
reg = GPIO_OUT_CTRL_BASE + bank;
|
|
|
|
return reg;
|
|
}
|
|
|
|
static void wcove_update_irq_mask(struct wcove_gpio *wg, int gpio)
|
|
{
|
|
unsigned int reg, mask;
|
|
|
|
if (gpio < GROUP0_NR_IRQS) {
|
|
reg = IRQ_MASK_BASE;
|
|
mask = BIT(gpio % GROUP0_NR_IRQS);
|
|
} else {
|
|
reg = IRQ_MASK_BASE + 1;
|
|
mask = BIT((gpio - GROUP0_NR_IRQS) % GROUP1_NR_IRQS);
|
|
}
|
|
|
|
if (wg->set_irq_mask)
|
|
regmap_update_bits(wg->regmap, reg, mask, mask);
|
|
else
|
|
regmap_update_bits(wg->regmap, reg, mask, 0);
|
|
}
|
|
|
|
static void wcove_update_irq_ctrl(struct wcove_gpio *wg, int gpio)
|
|
{
|
|
unsigned int reg = to_reg(gpio, CTRL_IN);
|
|
|
|
regmap_update_bits(wg->regmap, reg, CTLI_INTCNT_BE, wg->intcnt);
|
|
}
|
|
|
|
static int wcove_gpio_dir_in(struct gpio_chip *chip, unsigned int gpio)
|
|
{
|
|
struct wcove_gpio *wg = gpiochip_get_data(chip);
|
|
|
|
return regmap_write(wg->regmap, to_reg(gpio, CTRL_OUT),
|
|
CTLO_INPUT_SET);
|
|
}
|
|
|
|
static int wcove_gpio_dir_out(struct gpio_chip *chip, unsigned int gpio,
|
|
int value)
|
|
{
|
|
struct wcove_gpio *wg = gpiochip_get_data(chip);
|
|
|
|
return regmap_write(wg->regmap, to_reg(gpio, CTRL_OUT),
|
|
CTLO_OUTPUT_SET | value);
|
|
}
|
|
|
|
static int wcove_gpio_get_direction(struct gpio_chip *chip, unsigned int gpio)
|
|
{
|
|
struct wcove_gpio *wg = gpiochip_get_data(chip);
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
ret = regmap_read(wg->regmap, to_reg(gpio, CTRL_OUT), &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return !(val & CTLO_DIR_OUT);
|
|
}
|
|
|
|
static int wcove_gpio_get(struct gpio_chip *chip, unsigned int gpio)
|
|
{
|
|
struct wcove_gpio *wg = gpiochip_get_data(chip);
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
ret = regmap_read(wg->regmap, to_reg(gpio, CTRL_IN), &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return val & 0x1;
|
|
}
|
|
|
|
static void wcove_gpio_set(struct gpio_chip *chip,
|
|
unsigned int gpio, int value)
|
|
{
|
|
struct wcove_gpio *wg = gpiochip_get_data(chip);
|
|
|
|
if (value)
|
|
regmap_update_bits(wg->regmap, to_reg(gpio, CTRL_OUT), 1, 1);
|
|
else
|
|
regmap_update_bits(wg->regmap, to_reg(gpio, CTRL_OUT), 1, 0);
|
|
}
|
|
|
|
static int wcove_gpio_set_config(struct gpio_chip *chip, unsigned int gpio,
|
|
unsigned long config)
|
|
{
|
|
struct wcove_gpio *wg = gpiochip_get_data(chip);
|
|
|
|
switch (pinconf_to_config_param(config)) {
|
|
case PIN_CONFIG_DRIVE_OPEN_DRAIN:
|
|
return regmap_update_bits(wg->regmap, to_reg(gpio, CTRL_OUT),
|
|
CTLO_DRV_MASK, CTLO_DRV_OD);
|
|
case PIN_CONFIG_DRIVE_PUSH_PULL:
|
|
return regmap_update_bits(wg->regmap, to_reg(gpio, CTRL_OUT),
|
|
CTLO_DRV_MASK, CTLO_DRV_CMOS);
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
static int wcove_irq_type(struct irq_data *data, unsigned int type)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
|
struct wcove_gpio *wg = gpiochip_get_data(chip);
|
|
|
|
switch (type) {
|
|
case IRQ_TYPE_NONE:
|
|
wg->intcnt = CTLI_INTCNT_DIS;
|
|
break;
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
wg->intcnt = CTLI_INTCNT_BE;
|
|
break;
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
wg->intcnt = CTLI_INTCNT_PE;
|
|
break;
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
wg->intcnt = CTLI_INTCNT_NE;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
wg->update |= UPDATE_IRQ_TYPE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void wcove_bus_lock(struct irq_data *data)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
|
struct wcove_gpio *wg = gpiochip_get_data(chip);
|
|
|
|
mutex_lock(&wg->buslock);
|
|
}
|
|
|
|
static void wcove_bus_sync_unlock(struct irq_data *data)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
|
struct wcove_gpio *wg = gpiochip_get_data(chip);
|
|
int gpio = data->hwirq;
|
|
|
|
if (wg->update & UPDATE_IRQ_TYPE)
|
|
wcove_update_irq_ctrl(wg, gpio);
|
|
if (wg->update & UPDATE_IRQ_MASK)
|
|
wcove_update_irq_mask(wg, gpio);
|
|
wg->update = 0;
|
|
|
|
mutex_unlock(&wg->buslock);
|
|
}
|
|
|
|
static void wcove_irq_unmask(struct irq_data *data)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
|
struct wcove_gpio *wg = gpiochip_get_data(chip);
|
|
|
|
wg->set_irq_mask = false;
|
|
wg->update |= UPDATE_IRQ_MASK;
|
|
}
|
|
|
|
static void wcove_irq_mask(struct irq_data *data)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
|
struct wcove_gpio *wg = gpiochip_get_data(chip);
|
|
|
|
wg->set_irq_mask = true;
|
|
wg->update |= UPDATE_IRQ_MASK;
|
|
}
|
|
|
|
static struct irq_chip wcove_irqchip = {
|
|
.name = "Whiskey Cove",
|
|
.irq_mask = wcove_irq_mask,
|
|
.irq_unmask = wcove_irq_unmask,
|
|
.irq_set_type = wcove_irq_type,
|
|
.irq_bus_lock = wcove_bus_lock,
|
|
.irq_bus_sync_unlock = wcove_bus_sync_unlock,
|
|
};
|
|
|
|
static irqreturn_t wcove_gpio_irq_handler(int irq, void *data)
|
|
{
|
|
struct wcove_gpio *wg = (struct wcove_gpio *)data;
|
|
unsigned int pending, virq, gpio, mask, offset;
|
|
u8 p[2];
|
|
|
|
if (regmap_bulk_read(wg->regmap, IRQ_STATUS_BASE, p, 2)) {
|
|
dev_err(wg->dev, "Failed to read irq status register\n");
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
pending = p[0] | (p[1] << 8);
|
|
if (!pending)
|
|
return IRQ_NONE;
|
|
|
|
/* Iterate until no interrupt is pending */
|
|
while (pending) {
|
|
/* One iteration is for all pending bits */
|
|
for_each_set_bit(gpio, (const unsigned long *)&pending,
|
|
GROUP0_NR_IRQS) {
|
|
offset = (gpio > GROUP0_NR_IRQS) ? 1 : 0;
|
|
mask = (offset == 1) ? BIT(gpio - GROUP0_NR_IRQS) :
|
|
BIT(gpio);
|
|
virq = irq_find_mapping(wg->chip.irqdomain, gpio);
|
|
handle_nested_irq(virq);
|
|
regmap_update_bits(wg->regmap, IRQ_STATUS_BASE + offset,
|
|
mask, mask);
|
|
}
|
|
|
|
/* Next iteration */
|
|
if (regmap_bulk_read(wg->regmap, IRQ_STATUS_BASE, p, 2)) {
|
|
dev_err(wg->dev, "Failed to read irq status\n");
|
|
break;
|
|
}
|
|
|
|
pending = p[0] | (p[1] << 8);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void wcove_gpio_dbg_show(struct seq_file *s,
|
|
struct gpio_chip *chip)
|
|
{
|
|
unsigned int ctlo, ctli, irq_mask, irq_status;
|
|
struct wcove_gpio *wg = gpiochip_get_data(chip);
|
|
int gpio, offset, group, ret = 0;
|
|
|
|
for (gpio = 0; gpio < WCOVE_GPIO_NUM; gpio++) {
|
|
group = gpio < GROUP0_NR_IRQS ? 0 : 1;
|
|
ret += regmap_read(wg->regmap, to_reg(gpio, CTRL_OUT), &ctlo);
|
|
ret += regmap_read(wg->regmap, to_reg(gpio, CTRL_IN), &ctli);
|
|
ret += regmap_read(wg->regmap, IRQ_MASK_BASE + group,
|
|
&irq_mask);
|
|
ret += regmap_read(wg->regmap, IRQ_STATUS_BASE + group,
|
|
&irq_status);
|
|
if (ret) {
|
|
pr_err("Failed to read registers: ctrl out/in or irq status/mask\n");
|
|
break;
|
|
}
|
|
|
|
offset = gpio % 8;
|
|
seq_printf(s, " gpio-%-2d %s %s %s %s ctlo=%2x,%s %s\n",
|
|
gpio, ctlo & CTLO_DIR_OUT ? "out" : "in ",
|
|
ctli & 0x1 ? "hi" : "lo",
|
|
ctli & CTLI_INTCNT_NE ? "fall" : " ",
|
|
ctli & CTLI_INTCNT_PE ? "rise" : " ",
|
|
ctlo,
|
|
irq_mask & BIT(offset) ? "mask " : "unmask",
|
|
irq_status & BIT(offset) ? "pending" : " ");
|
|
}
|
|
}
|
|
|
|
static int wcove_gpio_probe(struct platform_device *pdev)
|
|
{
|
|
struct intel_soc_pmic *pmic;
|
|
struct wcove_gpio *wg;
|
|
int virq, ret, irq;
|
|
struct device *dev;
|
|
|
|
/*
|
|
* This gpio platform device is created by a mfd device (see
|
|
* drivers/mfd/intel_soc_pmic_bxtwc.c for details). Information
|
|
* shared by all sub-devices created by the mfd device, the regmap
|
|
* pointer for instance, is stored as driver data of the mfd device
|
|
* driver.
|
|
*/
|
|
pmic = dev_get_drvdata(pdev->dev.parent);
|
|
if (!pmic)
|
|
return -ENODEV;
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
dev = &pdev->dev;
|
|
|
|
wg = devm_kzalloc(dev, sizeof(*wg), GFP_KERNEL);
|
|
if (!wg)
|
|
return -ENOMEM;
|
|
|
|
wg->regmap_irq_chip = pmic->irq_chip_data_level2;
|
|
|
|
platform_set_drvdata(pdev, wg);
|
|
|
|
mutex_init(&wg->buslock);
|
|
wg->chip.label = KBUILD_MODNAME;
|
|
wg->chip.direction_input = wcove_gpio_dir_in;
|
|
wg->chip.direction_output = wcove_gpio_dir_out;
|
|
wg->chip.get_direction = wcove_gpio_get_direction;
|
|
wg->chip.get = wcove_gpio_get;
|
|
wg->chip.set = wcove_gpio_set;
|
|
wg->chip.set_config = wcove_gpio_set_config,
|
|
wg->chip.base = -1;
|
|
wg->chip.ngpio = WCOVE_VGPIO_NUM;
|
|
wg->chip.can_sleep = true;
|
|
wg->chip.parent = pdev->dev.parent;
|
|
wg->chip.dbg_show = wcove_gpio_dbg_show;
|
|
wg->dev = dev;
|
|
wg->regmap = pmic->regmap;
|
|
|
|
ret = devm_gpiochip_add_data(dev, &wg->chip, wg);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to add gpiochip: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = gpiochip_irqchip_add_nested(&wg->chip, &wcove_irqchip, 0,
|
|
handle_simple_irq, IRQ_TYPE_NONE);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to add irqchip: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
virq = regmap_irq_get_virq(wg->regmap_irq_chip, irq);
|
|
if (virq < 0) {
|
|
dev_err(dev, "Failed to get virq by irq %d\n", irq);
|
|
return virq;
|
|
}
|
|
|
|
ret = devm_request_threaded_irq(dev, virq, NULL,
|
|
wcove_gpio_irq_handler, IRQF_ONESHOT, pdev->name, wg);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to request irq %d\n", virq);
|
|
return ret;
|
|
}
|
|
|
|
gpiochip_set_nested_irqchip(&wg->chip, &wcove_irqchip, virq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Whiskey Cove PMIC itself is a analog device(but with digital control
|
|
* interface) providing power management support for other devices in
|
|
* the accompanied SoC, so we have no .pm for Whiskey Cove GPIO driver.
|
|
*/
|
|
static struct platform_driver wcove_gpio_driver = {
|
|
.driver = {
|
|
.name = "bxt_wcove_gpio",
|
|
},
|
|
.probe = wcove_gpio_probe,
|
|
};
|
|
|
|
module_platform_driver(wcove_gpio_driver);
|
|
|
|
MODULE_AUTHOR("Ajay Thomas <ajay.thomas.david.rajamanickam@intel.com>");
|
|
MODULE_AUTHOR("Bin Gao <bin.gao@intel.com>");
|
|
MODULE_DESCRIPTION("Intel Whiskey Cove GPIO Driver");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:bxt_wcove_gpio");
|