linux/include/asm-sparc64/oplib.h
David S. Miller 7890f794e0 [SPARC64]: Add prom_{start,stop}cpu_cpuid().
Use prom_startcpu_cpuid() on SUN4V instead of prom_startcpu().

We should really test for "SUNW,start-cpu-by-cpuid" presence
and use it if present even on SUN4U.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 01:13:04 -08:00

377 lines
12 KiB
C

/* $Id: oplib.h,v 1.14 2001/12/19 00:29:51 davem Exp $
* oplib.h: Describes the interface and available routines in the
* Linux Prom library.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
* Copyright (C) 1996 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
*/
#ifndef __SPARC64_OPLIB_H
#define __SPARC64_OPLIB_H
#include <linux/config.h>
#include <asm/openprom.h>
/* Enumeration to describe the prom major version we have detected. */
enum prom_major_version {
PROM_V0, /* Original sun4c V0 prom */
PROM_V2, /* sun4c and early sun4m V2 prom */
PROM_V3, /* sun4m and later, up to sun4d/sun4e machines V3 */
PROM_P1275, /* IEEE compliant ISA based Sun PROM, only sun4u */
PROM_AP1000, /* actually no prom at all */
};
extern enum prom_major_version prom_vers;
/* Revision, and firmware revision. */
extern unsigned int prom_rev, prom_prev;
/* Root node of the prom device tree, this stays constant after
* initialization is complete.
*/
extern int prom_root_node;
/* PROM stdin and stdout */
extern int prom_stdin, prom_stdout;
/* /chosen node of the prom device tree, this stays constant after
* initialization is complete.
*/
extern int prom_chosen_node;
/* Helper values and strings in arch/sparc64/kernel/head.S */
extern const char prom_peer_name[];
extern const char prom_compatible_name[];
extern const char prom_root_compatible[];
extern const char prom_finddev_name[];
extern const char prom_chosen_path[];
extern const char prom_getprop_name[];
extern const char prom_mmu_name[];
extern const char prom_callmethod_name[];
extern const char prom_translate_name[];
extern const char prom_map_name[];
extern const char prom_unmap_name[];
extern int prom_mmu_ihandle_cache;
extern unsigned int prom_boot_mapped_pc;
extern unsigned int prom_boot_mapping_mode;
extern unsigned long prom_boot_mapping_phys_high, prom_boot_mapping_phys_low;
struct linux_mlist_p1275 {
struct linux_mlist_p1275 *theres_more;
unsigned long start_adr;
unsigned long num_bytes;
};
struct linux_mem_p1275 {
struct linux_mlist_p1275 **p1275_totphys;
struct linux_mlist_p1275 **p1275_prommap;
struct linux_mlist_p1275 **p1275_available; /* What we can use */
};
/* The functions... */
/* You must call prom_init() before using any of the library services,
* preferably as early as possible. Pass it the romvec pointer.
*/
extern void prom_init(void *cif_handler, void *cif_stack);
/* Boot argument acquisition, returns the boot command line string. */
extern char *prom_getbootargs(void);
/* Device utilities. */
/* Device operations. */
/* Open the device described by the passed string. Note, that the format
* of the string is different on V0 vs. V2->higher proms. The caller must
* know what he/she is doing! Returns the device descriptor, an int.
*/
extern int prom_devopen(const char *device_string);
/* Close a previously opened device described by the passed integer
* descriptor.
*/
extern int prom_devclose(int device_handle);
/* Do a seek operation on the device described by the passed integer
* descriptor.
*/
extern void prom_seek(int device_handle, unsigned int seek_hival,
unsigned int seek_lowval);
/* Miscellaneous routines, don't really fit in any category per se. */
/* Reboot the machine with the command line passed. */
extern void prom_reboot(const char *boot_command);
/* Evaluate the forth string passed. */
extern void prom_feval(const char *forth_string);
/* Enter the prom, with possibility of continuation with the 'go'
* command in newer proms.
*/
extern void prom_cmdline(void);
/* Enter the prom, with no chance of continuation for the stand-alone
* which calls this.
*/
extern void prom_halt(void) __attribute__ ((noreturn));
/* Halt and power-off the machine. */
extern void prom_halt_power_off(void) __attribute__ ((noreturn));
/* Set the PROM 'sync' callback function to the passed function pointer.
* When the user gives the 'sync' command at the prom prompt while the
* kernel is still active, the prom will call this routine.
*
*/
typedef int (*callback_func_t)(long *cmd);
extern void prom_setcallback(callback_func_t func_ptr);
/* Acquire the IDPROM of the root node in the prom device tree. This
* gets passed a buffer where you would like it stuffed. The return value
* is the format type of this idprom or 0xff on error.
*/
extern unsigned char prom_get_idprom(char *idp_buffer, int idpbuf_size);
/* Get the prom major version. */
extern int prom_version(void);
/* Get the prom plugin revision. */
extern int prom_getrev(void);
/* Get the prom firmware revision. */
extern int prom_getprev(void);
/* Character operations to/from the console.... */
/* Non-blocking get character from console. */
extern int prom_nbgetchar(void);
/* Non-blocking put character to console. */
extern int prom_nbputchar(char character);
/* Blocking get character from console. */
extern char prom_getchar(void);
/* Blocking put character to console. */
extern void prom_putchar(char character);
/* Prom's internal routines, don't use in kernel/boot code. */
extern void prom_printf(const char *fmt, ...);
extern void prom_write(const char *buf, unsigned int len);
/* Query for input device type */
enum prom_input_device {
PROMDEV_IKBD, /* input from keyboard */
PROMDEV_ITTYA, /* input from ttya */
PROMDEV_ITTYB, /* input from ttyb */
PROMDEV_IRSC, /* input from rsc */
PROMDEV_IVCONS, /* input from virtual-console */
PROMDEV_I_UNK,
};
extern enum prom_input_device prom_query_input_device(void);
/* Query for output device type */
enum prom_output_device {
PROMDEV_OSCREEN, /* to screen */
PROMDEV_OTTYA, /* to ttya */
PROMDEV_OTTYB, /* to ttyb */
PROMDEV_ORSC, /* to rsc */
PROMDEV_OVCONS, /* to virtual-console */
PROMDEV_O_UNK,
};
extern enum prom_output_device prom_query_output_device(void);
/* Multiprocessor operations... */
#ifdef CONFIG_SMP
/* Start the CPU with the given device tree node at the passed program
* counter with the given arg passed in via register %o0.
*/
extern void prom_startcpu(int cpunode, unsigned long pc, unsigned long arg);
/* Start the CPU with the given cpu ID at the passed program
* counter with the given arg passed in via register %o0.
*/
extern void prom_startcpu_cpuid(int cpuid, unsigned long pc, unsigned long arg);
/* Stop the CPU with the given cpu ID. */
extern void prom_stopcpu_cpuid(int cpuid);
/* Stop the current CPU. */
extern void prom_stopself(void);
/* Idle the current CPU. */
extern void prom_idleself(void);
/* Resume the CPU with the passed device tree node. */
extern void prom_resumecpu(int cpunode);
#endif
/* Power management interfaces. */
/* Put the current CPU to sleep. */
extern void prom_sleepself(void);
/* Put the entire system to sleep. */
extern int prom_sleepsystem(void);
/* Initiate a wakeup event. */
extern int prom_wakeupsystem(void);
/* MMU and memory related OBP interfaces. */
/* Get unique string identifying SIMM at given physical address. */
extern int prom_getunumber(int syndrome_code,
unsigned long phys_addr,
char *buf, int buflen);
/* Retain physical memory to the caller across soft resets. */
extern unsigned long prom_retain(const char *name,
unsigned long pa_low, unsigned long pa_high,
long size, long align);
/* Load explicit I/D TLB entries into the calling processor. */
extern long prom_itlb_load(unsigned long index,
unsigned long tte_data,
unsigned long vaddr);
extern long prom_dtlb_load(unsigned long index,
unsigned long tte_data,
unsigned long vaddr);
/* Map/Unmap client program address ranges. First the format of
* the mapping mode argument.
*/
#define PROM_MAP_WRITE 0x0001 /* Writable */
#define PROM_MAP_READ 0x0002 /* Readable - sw */
#define PROM_MAP_EXEC 0x0004 /* Executable - sw */
#define PROM_MAP_LOCKED 0x0010 /* Locked, use i/dtlb load calls for this instead */
#define PROM_MAP_CACHED 0x0020 /* Cacheable in both L1 and L2 caches */
#define PROM_MAP_SE 0x0040 /* Side-Effects */
#define PROM_MAP_GLOB 0x0080 /* Global */
#define PROM_MAP_IE 0x0100 /* Invert-Endianness */
#define PROM_MAP_DEFAULT (PROM_MAP_WRITE | PROM_MAP_READ | PROM_MAP_EXEC | PROM_MAP_CACHED)
extern int prom_map(int mode, unsigned long size,
unsigned long vaddr, unsigned long paddr);
extern void prom_unmap(unsigned long size, unsigned long vaddr);
/* PROM device tree traversal functions... */
#ifdef PROMLIB_INTERNAL
/* Internal version of prom_getchild. */
extern int __prom_getchild(int parent_node);
/* Internal version of prom_getsibling. */
extern int __prom_getsibling(int node);
#endif
/* Get the child node of the given node, or zero if no child exists. */
extern int prom_getchild(int parent_node);
/* Get the next sibling node of the given node, or zero if no further
* siblings exist.
*/
extern int prom_getsibling(int node);
/* Get the length, at the passed node, of the given property type.
* Returns -1 on error (ie. no such property at this node).
*/
extern int prom_getproplen(int thisnode, const char *property);
/* Fetch the requested property using the given buffer. Returns
* the number of bytes the prom put into your buffer or -1 on error.
*/
extern int prom_getproperty(int thisnode, const char *property,
char *prop_buffer, int propbuf_size);
/* Acquire an integer property. */
extern int prom_getint(int node, const char *property);
/* Acquire an integer property, with a default value. */
extern int prom_getintdefault(int node, const char *property, int defval);
/* Acquire a boolean property, 0=FALSE 1=TRUE. */
extern int prom_getbool(int node, const char *prop);
/* Acquire a string property, null string on error. */
extern void prom_getstring(int node, const char *prop, char *buf, int bufsize);
/* Does the passed node have the given "name"? YES=1 NO=0 */
extern int prom_nodematch(int thisnode, const char *name);
/* Puts in buffer a prom name in the form name@x,y or name (x for which_io
* and y for first regs phys address
*/
extern int prom_getname(int node, char *buf, int buflen);
/* Search all siblings starting at the passed node for "name" matching
* the given string. Returns the node on success, zero on failure.
*/
extern int prom_searchsiblings(int node_start, const char *name);
/* Return the first property type, as a string, for the given node.
* Returns a null string on error. Buffer should be at least 32B long.
*/
extern char *prom_firstprop(int node, char *buffer);
/* Returns the next property after the passed property for the given
* node. Returns null string on failure. Buffer should be at least 32B long.
*/
extern char *prom_nextprop(int node, const char *prev_property, char *buffer);
/* Returns 1 if the specified node has given property. */
extern int prom_node_has_property(int node, const char *property);
/* Returns phandle of the path specified */
extern int prom_finddevice(const char *name);
/* Set the indicated property at the given node with the passed value.
* Returns the number of bytes of your value that the prom took.
*/
extern int prom_setprop(int node, const char *prop_name, char *prop_value,
int value_size);
extern int prom_pathtoinode(const char *path);
extern int prom_inst2pkg(int);
/* CPU probing helpers. */
int cpu_find_by_instance(int instance, int *prom_node, int *mid);
int cpu_find_by_mid(int mid, int *prom_node);
/* Client interface level routines. */
extern void prom_set_trap_table(unsigned long tba);
extern void prom_set_trap_table_sun4v(unsigned long tba, unsigned long mmfsa);
extern long p1275_cmd(const char *, long, ...);
#if 0
#define P1275_SIZE(x) ((((long)((x) / 32)) << 32) | (x))
#else
#define P1275_SIZE(x) x
#endif
/* We support at most 16 input and 1 output argument */
#define P1275_ARG_NUMBER 0
#define P1275_ARG_IN_STRING 1
#define P1275_ARG_OUT_BUF 2
#define P1275_ARG_OUT_32B 3
#define P1275_ARG_IN_FUNCTION 4
#define P1275_ARG_IN_BUF 5
#define P1275_ARG_IN_64B 6
#define P1275_IN(x) ((x) & 0xf)
#define P1275_OUT(x) (((x) << 4) & 0xf0)
#define P1275_INOUT(i,o) (P1275_IN(i)|P1275_OUT(o))
#define P1275_ARG(n,x) ((x) << ((n)*3 + 8))
#endif /* !(__SPARC64_OPLIB_H) */