forked from Minki/linux
5d317c6a95
This change enables to control via ethtool whether to do UDP RSS on 2-tupple (IP source / destination only) or on 4-tupple (include UDP source / destination port). It also enables to read back the RSS configuration. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1373 lines
35 KiB
C
1373 lines
35 KiB
C
/* bnx2x_sp.h: Broadcom Everest network driver.
|
|
*
|
|
* Copyright (c) 2011-2012 Broadcom Corporation
|
|
*
|
|
* Unless you and Broadcom execute a separate written software license
|
|
* agreement governing use of this software, this software is licensed to you
|
|
* under the terms of the GNU General Public License version 2, available
|
|
* at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
|
|
*
|
|
* Notwithstanding the above, under no circumstances may you combine this
|
|
* software in any way with any other Broadcom software provided under a
|
|
* license other than the GPL, without Broadcom's express prior written
|
|
* consent.
|
|
*
|
|
* Maintained by: Eilon Greenstein <eilong@broadcom.com>
|
|
* Written by: Vladislav Zolotarov
|
|
*
|
|
*/
|
|
#ifndef BNX2X_SP_VERBS
|
|
#define BNX2X_SP_VERBS
|
|
|
|
struct bnx2x;
|
|
struct eth_context;
|
|
|
|
/* Bits representing general command's configuration */
|
|
enum {
|
|
RAMROD_TX,
|
|
RAMROD_RX,
|
|
/* Wait until all pending commands complete */
|
|
RAMROD_COMP_WAIT,
|
|
/* Don't send a ramrod, only update a registry */
|
|
RAMROD_DRV_CLR_ONLY,
|
|
/* Configure HW according to the current object state */
|
|
RAMROD_RESTORE,
|
|
/* Execute the next command now */
|
|
RAMROD_EXEC,
|
|
/*
|
|
* Don't add a new command and continue execution of posponed
|
|
* commands. If not set a new command will be added to the
|
|
* pending commands list.
|
|
*/
|
|
RAMROD_CONT,
|
|
};
|
|
|
|
typedef enum {
|
|
BNX2X_OBJ_TYPE_RX,
|
|
BNX2X_OBJ_TYPE_TX,
|
|
BNX2X_OBJ_TYPE_RX_TX,
|
|
} bnx2x_obj_type;
|
|
|
|
/* Filtering states */
|
|
enum {
|
|
BNX2X_FILTER_MAC_PENDING,
|
|
BNX2X_FILTER_VLAN_PENDING,
|
|
BNX2X_FILTER_VLAN_MAC_PENDING,
|
|
BNX2X_FILTER_RX_MODE_PENDING,
|
|
BNX2X_FILTER_RX_MODE_SCHED,
|
|
BNX2X_FILTER_ISCSI_ETH_START_SCHED,
|
|
BNX2X_FILTER_ISCSI_ETH_STOP_SCHED,
|
|
BNX2X_FILTER_FCOE_ETH_START_SCHED,
|
|
BNX2X_FILTER_FCOE_ETH_STOP_SCHED,
|
|
BNX2X_FILTER_MCAST_PENDING,
|
|
BNX2X_FILTER_MCAST_SCHED,
|
|
BNX2X_FILTER_RSS_CONF_PENDING,
|
|
BNX2X_AFEX_FCOE_Q_UPDATE_PENDING,
|
|
BNX2X_AFEX_PENDING_VIFSET_MCP_ACK
|
|
};
|
|
|
|
struct bnx2x_raw_obj {
|
|
u8 func_id;
|
|
|
|
/* Queue params */
|
|
u8 cl_id;
|
|
u32 cid;
|
|
|
|
/* Ramrod data buffer params */
|
|
void *rdata;
|
|
dma_addr_t rdata_mapping;
|
|
|
|
/* Ramrod state params */
|
|
int state; /* "ramrod is pending" state bit */
|
|
unsigned long *pstate; /* pointer to state buffer */
|
|
|
|
bnx2x_obj_type obj_type;
|
|
|
|
int (*wait_comp)(struct bnx2x *bp,
|
|
struct bnx2x_raw_obj *o);
|
|
|
|
bool (*check_pending)(struct bnx2x_raw_obj *o);
|
|
void (*clear_pending)(struct bnx2x_raw_obj *o);
|
|
void (*set_pending)(struct bnx2x_raw_obj *o);
|
|
};
|
|
|
|
/************************* VLAN-MAC commands related parameters ***************/
|
|
struct bnx2x_mac_ramrod_data {
|
|
u8 mac[ETH_ALEN];
|
|
};
|
|
|
|
struct bnx2x_vlan_ramrod_data {
|
|
u16 vlan;
|
|
};
|
|
|
|
struct bnx2x_vlan_mac_ramrod_data {
|
|
u8 mac[ETH_ALEN];
|
|
u16 vlan;
|
|
};
|
|
|
|
union bnx2x_classification_ramrod_data {
|
|
struct bnx2x_mac_ramrod_data mac;
|
|
struct bnx2x_vlan_ramrod_data vlan;
|
|
struct bnx2x_vlan_mac_ramrod_data vlan_mac;
|
|
};
|
|
|
|
/* VLAN_MAC commands */
|
|
enum bnx2x_vlan_mac_cmd {
|
|
BNX2X_VLAN_MAC_ADD,
|
|
BNX2X_VLAN_MAC_DEL,
|
|
BNX2X_VLAN_MAC_MOVE,
|
|
};
|
|
|
|
struct bnx2x_vlan_mac_data {
|
|
/* Requested command: BNX2X_VLAN_MAC_XX */
|
|
enum bnx2x_vlan_mac_cmd cmd;
|
|
/*
|
|
* used to contain the data related vlan_mac_flags bits from
|
|
* ramrod parameters.
|
|
*/
|
|
unsigned long vlan_mac_flags;
|
|
|
|
/* Needed for MOVE command */
|
|
struct bnx2x_vlan_mac_obj *target_obj;
|
|
|
|
union bnx2x_classification_ramrod_data u;
|
|
};
|
|
|
|
/*************************** Exe Queue obj ************************************/
|
|
union bnx2x_exe_queue_cmd_data {
|
|
struct bnx2x_vlan_mac_data vlan_mac;
|
|
|
|
struct {
|
|
/* TODO */
|
|
} mcast;
|
|
};
|
|
|
|
struct bnx2x_exeq_elem {
|
|
struct list_head link;
|
|
|
|
/* Length of this element in the exe_chunk. */
|
|
int cmd_len;
|
|
|
|
union bnx2x_exe_queue_cmd_data cmd_data;
|
|
};
|
|
|
|
union bnx2x_qable_obj;
|
|
|
|
union bnx2x_exeq_comp_elem {
|
|
union event_ring_elem *elem;
|
|
};
|
|
|
|
struct bnx2x_exe_queue_obj;
|
|
|
|
typedef int (*exe_q_validate)(struct bnx2x *bp,
|
|
union bnx2x_qable_obj *o,
|
|
struct bnx2x_exeq_elem *elem);
|
|
|
|
typedef int (*exe_q_remove)(struct bnx2x *bp,
|
|
union bnx2x_qable_obj *o,
|
|
struct bnx2x_exeq_elem *elem);
|
|
|
|
/**
|
|
* @return positive is entry was optimized, 0 - if not, negative
|
|
* in case of an error.
|
|
*/
|
|
typedef int (*exe_q_optimize)(struct bnx2x *bp,
|
|
union bnx2x_qable_obj *o,
|
|
struct bnx2x_exeq_elem *elem);
|
|
typedef int (*exe_q_execute)(struct bnx2x *bp,
|
|
union bnx2x_qable_obj *o,
|
|
struct list_head *exe_chunk,
|
|
unsigned long *ramrod_flags);
|
|
typedef struct bnx2x_exeq_elem *
|
|
(*exe_q_get)(struct bnx2x_exe_queue_obj *o,
|
|
struct bnx2x_exeq_elem *elem);
|
|
|
|
struct bnx2x_exe_queue_obj {
|
|
/*
|
|
* Commands pending for an execution.
|
|
*/
|
|
struct list_head exe_queue;
|
|
|
|
/*
|
|
* Commands pending for an completion.
|
|
*/
|
|
struct list_head pending_comp;
|
|
|
|
spinlock_t lock;
|
|
|
|
/* Maximum length of commands' list for one execution */
|
|
int exe_chunk_len;
|
|
|
|
union bnx2x_qable_obj *owner;
|
|
|
|
/****** Virtual functions ******/
|
|
/**
|
|
* Called before commands execution for commands that are really
|
|
* going to be executed (after 'optimize').
|
|
*
|
|
* Must run under exe_queue->lock
|
|
*/
|
|
exe_q_validate validate;
|
|
|
|
/**
|
|
* Called before removing pending commands, cleaning allocated
|
|
* resources (e.g., credits from validate)
|
|
*/
|
|
exe_q_remove remove;
|
|
|
|
/**
|
|
* This will try to cancel the current pending commands list
|
|
* considering the new command.
|
|
*
|
|
* Returns the number of optimized commands or a negative error code
|
|
*
|
|
* Must run under exe_queue->lock
|
|
*/
|
|
exe_q_optimize optimize;
|
|
|
|
/**
|
|
* Run the next commands chunk (owner specific).
|
|
*/
|
|
exe_q_execute execute;
|
|
|
|
/**
|
|
* Return the exe_queue element containing the specific command
|
|
* if any. Otherwise return NULL.
|
|
*/
|
|
exe_q_get get;
|
|
};
|
|
/***************** Classification verbs: Set/Del MAC/VLAN/VLAN-MAC ************/
|
|
/*
|
|
* Element in the VLAN_MAC registry list having all currenty configured
|
|
* rules.
|
|
*/
|
|
struct bnx2x_vlan_mac_registry_elem {
|
|
struct list_head link;
|
|
|
|
/*
|
|
* Used to store the cam offset used for the mac/vlan/vlan-mac.
|
|
* Relevant for 57710 and 57711 only. VLANs and MACs share the
|
|
* same CAM for these chips.
|
|
*/
|
|
int cam_offset;
|
|
|
|
/* Needed for DEL and RESTORE flows */
|
|
unsigned long vlan_mac_flags;
|
|
|
|
union bnx2x_classification_ramrod_data u;
|
|
};
|
|
|
|
/* Bits representing VLAN_MAC commands specific flags */
|
|
enum {
|
|
BNX2X_UC_LIST_MAC,
|
|
BNX2X_ETH_MAC,
|
|
BNX2X_ISCSI_ETH_MAC,
|
|
BNX2X_NETQ_ETH_MAC,
|
|
BNX2X_DONT_CONSUME_CAM_CREDIT,
|
|
BNX2X_DONT_CONSUME_CAM_CREDIT_DEST,
|
|
};
|
|
|
|
struct bnx2x_vlan_mac_ramrod_params {
|
|
/* Object to run the command from */
|
|
struct bnx2x_vlan_mac_obj *vlan_mac_obj;
|
|
|
|
/* General command flags: COMP_WAIT, etc. */
|
|
unsigned long ramrod_flags;
|
|
|
|
/* Command specific configuration request */
|
|
struct bnx2x_vlan_mac_data user_req;
|
|
};
|
|
|
|
struct bnx2x_vlan_mac_obj {
|
|
struct bnx2x_raw_obj raw;
|
|
|
|
/* Bookkeeping list: will prevent the addition of already existing
|
|
* entries.
|
|
*/
|
|
struct list_head head;
|
|
|
|
/* TODO: Add it's initialization in the init functions */
|
|
struct bnx2x_exe_queue_obj exe_queue;
|
|
|
|
/* MACs credit pool */
|
|
struct bnx2x_credit_pool_obj *macs_pool;
|
|
|
|
/* VLANs credit pool */
|
|
struct bnx2x_credit_pool_obj *vlans_pool;
|
|
|
|
/* RAMROD command to be used */
|
|
int ramrod_cmd;
|
|
|
|
/* copy first n elements onto preallocated buffer
|
|
*
|
|
* @param n number of elements to get
|
|
* @param buf buffer preallocated by caller into which elements
|
|
* will be copied. Note elements are 4-byte aligned
|
|
* so buffer size must be able to accomodate the
|
|
* aligned elements.
|
|
*
|
|
* @return number of copied bytes
|
|
*/
|
|
int (*get_n_elements)(struct bnx2x *bp, struct bnx2x_vlan_mac_obj *o,
|
|
int n, u8 *buf);
|
|
|
|
/**
|
|
* Checks if ADD-ramrod with the given params may be performed.
|
|
*
|
|
* @return zero if the element may be added
|
|
*/
|
|
|
|
int (*check_add)(struct bnx2x *bp,
|
|
struct bnx2x_vlan_mac_obj *o,
|
|
union bnx2x_classification_ramrod_data *data);
|
|
|
|
/**
|
|
* Checks if DEL-ramrod with the given params may be performed.
|
|
*
|
|
* @return true if the element may be deleted
|
|
*/
|
|
struct bnx2x_vlan_mac_registry_elem *
|
|
(*check_del)(struct bnx2x *bp,
|
|
struct bnx2x_vlan_mac_obj *o,
|
|
union bnx2x_classification_ramrod_data *data);
|
|
|
|
/**
|
|
* Checks if DEL-ramrod with the given params may be performed.
|
|
*
|
|
* @return true if the element may be deleted
|
|
*/
|
|
bool (*check_move)(struct bnx2x *bp,
|
|
struct bnx2x_vlan_mac_obj *src_o,
|
|
struct bnx2x_vlan_mac_obj *dst_o,
|
|
union bnx2x_classification_ramrod_data *data);
|
|
|
|
/**
|
|
* Update the relevant credit object(s) (consume/return
|
|
* correspondingly).
|
|
*/
|
|
bool (*get_credit)(struct bnx2x_vlan_mac_obj *o);
|
|
bool (*put_credit)(struct bnx2x_vlan_mac_obj *o);
|
|
bool (*get_cam_offset)(struct bnx2x_vlan_mac_obj *o, int *offset);
|
|
bool (*put_cam_offset)(struct bnx2x_vlan_mac_obj *o, int offset);
|
|
|
|
/**
|
|
* Configures one rule in the ramrod data buffer.
|
|
*/
|
|
void (*set_one_rule)(struct bnx2x *bp,
|
|
struct bnx2x_vlan_mac_obj *o,
|
|
struct bnx2x_exeq_elem *elem, int rule_idx,
|
|
int cam_offset);
|
|
|
|
/**
|
|
* Delete all configured elements having the given
|
|
* vlan_mac_flags specification. Assumes no pending for
|
|
* execution commands. Will schedule all all currently
|
|
* configured MACs/VLANs/VLAN-MACs matching the vlan_mac_flags
|
|
* specification for deletion and will use the given
|
|
* ramrod_flags for the last DEL operation.
|
|
*
|
|
* @param bp
|
|
* @param o
|
|
* @param ramrod_flags RAMROD_XX flags
|
|
*
|
|
* @return 0 if the last operation has completed successfully
|
|
* and there are no more elements left, positive value
|
|
* if there are pending for completion commands,
|
|
* negative value in case of failure.
|
|
*/
|
|
int (*delete_all)(struct bnx2x *bp,
|
|
struct bnx2x_vlan_mac_obj *o,
|
|
unsigned long *vlan_mac_flags,
|
|
unsigned long *ramrod_flags);
|
|
|
|
/**
|
|
* Reconfigures the next MAC/VLAN/VLAN-MAC element from the previously
|
|
* configured elements list.
|
|
*
|
|
* @param bp
|
|
* @param p Command parameters (RAMROD_COMP_WAIT bit in
|
|
* ramrod_flags is only taken into an account)
|
|
* @param ppos a pointer to the cooky that should be given back in the
|
|
* next call to make function handle the next element. If
|
|
* *ppos is set to NULL it will restart the iterator.
|
|
* If returned *ppos == NULL this means that the last
|
|
* element has been handled.
|
|
*
|
|
* @return int
|
|
*/
|
|
int (*restore)(struct bnx2x *bp,
|
|
struct bnx2x_vlan_mac_ramrod_params *p,
|
|
struct bnx2x_vlan_mac_registry_elem **ppos);
|
|
|
|
/**
|
|
* Should be called on a completion arival.
|
|
*
|
|
* @param bp
|
|
* @param o
|
|
* @param cqe Completion element we are handling
|
|
* @param ramrod_flags if RAMROD_CONT is set the next bulk of
|
|
* pending commands will be executed.
|
|
* RAMROD_DRV_CLR_ONLY and RAMROD_RESTORE
|
|
* may also be set if needed.
|
|
*
|
|
* @return 0 if there are neither pending nor waiting for
|
|
* completion commands. Positive value if there are
|
|
* pending for execution or for completion commands.
|
|
* Negative value in case of an error (including an
|
|
* error in the cqe).
|
|
*/
|
|
int (*complete)(struct bnx2x *bp, struct bnx2x_vlan_mac_obj *o,
|
|
union event_ring_elem *cqe,
|
|
unsigned long *ramrod_flags);
|
|
|
|
/**
|
|
* Wait for completion of all commands. Don't schedule new ones,
|
|
* just wait. It assumes that the completion code will schedule
|
|
* for new commands.
|
|
*/
|
|
int (*wait)(struct bnx2x *bp, struct bnx2x_vlan_mac_obj *o);
|
|
};
|
|
|
|
enum {
|
|
BNX2X_LLH_CAM_ISCSI_ETH_LINE = 0,
|
|
BNX2X_LLH_CAM_ETH_LINE,
|
|
BNX2X_LLH_CAM_MAX_PF_LINE = NIG_REG_LLH1_FUNC_MEM_SIZE / 2
|
|
};
|
|
|
|
void bnx2x_set_mac_in_nig(struct bnx2x *bp,
|
|
bool add, unsigned char *dev_addr, int index);
|
|
|
|
/** RX_MODE verbs:DROP_ALL/ACCEPT_ALL/ACCEPT_ALL_MULTI/ACCEPT_ALL_VLAN/NORMAL */
|
|
|
|
/* RX_MODE ramrod spesial flags: set in rx_mode_flags field in
|
|
* a bnx2x_rx_mode_ramrod_params.
|
|
*/
|
|
enum {
|
|
BNX2X_RX_MODE_FCOE_ETH,
|
|
BNX2X_RX_MODE_ISCSI_ETH,
|
|
};
|
|
|
|
enum {
|
|
BNX2X_ACCEPT_UNICAST,
|
|
BNX2X_ACCEPT_MULTICAST,
|
|
BNX2X_ACCEPT_ALL_UNICAST,
|
|
BNX2X_ACCEPT_ALL_MULTICAST,
|
|
BNX2X_ACCEPT_BROADCAST,
|
|
BNX2X_ACCEPT_UNMATCHED,
|
|
BNX2X_ACCEPT_ANY_VLAN
|
|
};
|
|
|
|
struct bnx2x_rx_mode_ramrod_params {
|
|
struct bnx2x_rx_mode_obj *rx_mode_obj;
|
|
unsigned long *pstate;
|
|
int state;
|
|
u8 cl_id;
|
|
u32 cid;
|
|
u8 func_id;
|
|
unsigned long ramrod_flags;
|
|
unsigned long rx_mode_flags;
|
|
|
|
/*
|
|
* rdata is either a pointer to eth_filter_rules_ramrod_data(e2) or to
|
|
* a tstorm_eth_mac_filter_config (e1x).
|
|
*/
|
|
void *rdata;
|
|
dma_addr_t rdata_mapping;
|
|
|
|
/* Rx mode settings */
|
|
unsigned long rx_accept_flags;
|
|
|
|
/* internal switching settings */
|
|
unsigned long tx_accept_flags;
|
|
};
|
|
|
|
struct bnx2x_rx_mode_obj {
|
|
int (*config_rx_mode)(struct bnx2x *bp,
|
|
struct bnx2x_rx_mode_ramrod_params *p);
|
|
|
|
int (*wait_comp)(struct bnx2x *bp,
|
|
struct bnx2x_rx_mode_ramrod_params *p);
|
|
};
|
|
|
|
/********************** Set multicast group ***********************************/
|
|
|
|
struct bnx2x_mcast_list_elem {
|
|
struct list_head link;
|
|
u8 *mac;
|
|
};
|
|
|
|
union bnx2x_mcast_config_data {
|
|
u8 *mac;
|
|
u8 bin; /* used in a RESTORE flow */
|
|
};
|
|
|
|
struct bnx2x_mcast_ramrod_params {
|
|
struct bnx2x_mcast_obj *mcast_obj;
|
|
|
|
/* Relevant options are RAMROD_COMP_WAIT and RAMROD_DRV_CLR_ONLY */
|
|
unsigned long ramrod_flags;
|
|
|
|
struct list_head mcast_list; /* list of struct bnx2x_mcast_list_elem */
|
|
/** TODO:
|
|
* - rename it to macs_num.
|
|
* - Add a new command type for handling pending commands
|
|
* (remove "zero semantics").
|
|
*
|
|
* Length of mcast_list. If zero and ADD_CONT command - post
|
|
* pending commands.
|
|
*/
|
|
int mcast_list_len;
|
|
};
|
|
|
|
enum {
|
|
BNX2X_MCAST_CMD_ADD,
|
|
BNX2X_MCAST_CMD_CONT,
|
|
BNX2X_MCAST_CMD_DEL,
|
|
BNX2X_MCAST_CMD_RESTORE,
|
|
};
|
|
|
|
struct bnx2x_mcast_obj {
|
|
struct bnx2x_raw_obj raw;
|
|
|
|
union {
|
|
struct {
|
|
#define BNX2X_MCAST_BINS_NUM 256
|
|
#define BNX2X_MCAST_VEC_SZ (BNX2X_MCAST_BINS_NUM / 64)
|
|
u64 vec[BNX2X_MCAST_VEC_SZ];
|
|
|
|
/** Number of BINs to clear. Should be updated
|
|
* immediately when a command arrives in order to
|
|
* properly create DEL commands.
|
|
*/
|
|
int num_bins_set;
|
|
} aprox_match;
|
|
|
|
struct {
|
|
struct list_head macs;
|
|
int num_macs_set;
|
|
} exact_match;
|
|
} registry;
|
|
|
|
/* Pending commands */
|
|
struct list_head pending_cmds_head;
|
|
|
|
/* A state that is set in raw.pstate, when there are pending commands */
|
|
int sched_state;
|
|
|
|
/* Maximal number of mcast MACs configured in one command */
|
|
int max_cmd_len;
|
|
|
|
/* Total number of currently pending MACs to configure: both
|
|
* in the pending commands list and in the current command.
|
|
*/
|
|
int total_pending_num;
|
|
|
|
u8 engine_id;
|
|
|
|
/**
|
|
* @param cmd command to execute (BNX2X_MCAST_CMD_X, see above)
|
|
*/
|
|
int (*config_mcast)(struct bnx2x *bp,
|
|
struct bnx2x_mcast_ramrod_params *p, int cmd);
|
|
|
|
/**
|
|
* Fills the ramrod data during the RESTORE flow.
|
|
*
|
|
* @param bp
|
|
* @param o
|
|
* @param start_idx Registry index to start from
|
|
* @param rdata_idx Index in the ramrod data to start from
|
|
*
|
|
* @return -1 if we handled the whole registry or index of the last
|
|
* handled registry element.
|
|
*/
|
|
int (*hdl_restore)(struct bnx2x *bp, struct bnx2x_mcast_obj *o,
|
|
int start_bin, int *rdata_idx);
|
|
|
|
int (*enqueue_cmd)(struct bnx2x *bp, struct bnx2x_mcast_obj *o,
|
|
struct bnx2x_mcast_ramrod_params *p, int cmd);
|
|
|
|
void (*set_one_rule)(struct bnx2x *bp,
|
|
struct bnx2x_mcast_obj *o, int idx,
|
|
union bnx2x_mcast_config_data *cfg_data, int cmd);
|
|
|
|
/** Checks if there are more mcast MACs to be set or a previous
|
|
* command is still pending.
|
|
*/
|
|
bool (*check_pending)(struct bnx2x_mcast_obj *o);
|
|
|
|
/**
|
|
* Set/Clear/Check SCHEDULED state of the object
|
|
*/
|
|
void (*set_sched)(struct bnx2x_mcast_obj *o);
|
|
void (*clear_sched)(struct bnx2x_mcast_obj *o);
|
|
bool (*check_sched)(struct bnx2x_mcast_obj *o);
|
|
|
|
/* Wait until all pending commands complete */
|
|
int (*wait_comp)(struct bnx2x *bp, struct bnx2x_mcast_obj *o);
|
|
|
|
/**
|
|
* Handle the internal object counters needed for proper
|
|
* commands handling. Checks that the provided parameters are
|
|
* feasible.
|
|
*/
|
|
int (*validate)(struct bnx2x *bp,
|
|
struct bnx2x_mcast_ramrod_params *p, int cmd);
|
|
|
|
/**
|
|
* Restore the values of internal counters in case of a failure.
|
|
*/
|
|
void (*revert)(struct bnx2x *bp,
|
|
struct bnx2x_mcast_ramrod_params *p,
|
|
int old_num_bins);
|
|
|
|
int (*get_registry_size)(struct bnx2x_mcast_obj *o);
|
|
void (*set_registry_size)(struct bnx2x_mcast_obj *o, int n);
|
|
};
|
|
|
|
/*************************** Credit handling **********************************/
|
|
struct bnx2x_credit_pool_obj {
|
|
|
|
/* Current amount of credit in the pool */
|
|
atomic_t credit;
|
|
|
|
/* Maximum allowed credit. put() will check against it. */
|
|
int pool_sz;
|
|
|
|
/*
|
|
* Allocate a pool table statically.
|
|
*
|
|
* Currently the mamimum allowed size is MAX_MAC_CREDIT_E2(272)
|
|
*
|
|
* The set bit in the table will mean that the entry is available.
|
|
*/
|
|
#define BNX2X_POOL_VEC_SIZE (MAX_MAC_CREDIT_E2 / 64)
|
|
u64 pool_mirror[BNX2X_POOL_VEC_SIZE];
|
|
|
|
/* Base pool offset (initialized differently */
|
|
int base_pool_offset;
|
|
|
|
/**
|
|
* Get the next free pool entry.
|
|
*
|
|
* @return true if there was a free entry in the pool
|
|
*/
|
|
bool (*get_entry)(struct bnx2x_credit_pool_obj *o, int *entry);
|
|
|
|
/**
|
|
* Return the entry back to the pool.
|
|
*
|
|
* @return true if entry is legal and has been successfully
|
|
* returned to the pool.
|
|
*/
|
|
bool (*put_entry)(struct bnx2x_credit_pool_obj *o, int entry);
|
|
|
|
/**
|
|
* Get the requested amount of credit from the pool.
|
|
*
|
|
* @param cnt Amount of requested credit
|
|
* @return true if the operation is successful
|
|
*/
|
|
bool (*get)(struct bnx2x_credit_pool_obj *o, int cnt);
|
|
|
|
/**
|
|
* Returns the credit to the pool.
|
|
*
|
|
* @param cnt Amount of credit to return
|
|
* @return true if the operation is successful
|
|
*/
|
|
bool (*put)(struct bnx2x_credit_pool_obj *o, int cnt);
|
|
|
|
/**
|
|
* Reads the current amount of credit.
|
|
*/
|
|
int (*check)(struct bnx2x_credit_pool_obj *o);
|
|
};
|
|
|
|
/*************************** RSS configuration ********************************/
|
|
enum {
|
|
/* RSS_MODE bits are mutually exclusive */
|
|
BNX2X_RSS_MODE_DISABLED,
|
|
BNX2X_RSS_MODE_REGULAR,
|
|
|
|
BNX2X_RSS_SET_SRCH, /* Setup searcher, E1x specific flag */
|
|
|
|
BNX2X_RSS_IPV4,
|
|
BNX2X_RSS_IPV4_TCP,
|
|
BNX2X_RSS_IPV4_UDP,
|
|
BNX2X_RSS_IPV6,
|
|
BNX2X_RSS_IPV6_TCP,
|
|
BNX2X_RSS_IPV6_UDP,
|
|
};
|
|
|
|
struct bnx2x_config_rss_params {
|
|
struct bnx2x_rss_config_obj *rss_obj;
|
|
|
|
/* may have RAMROD_COMP_WAIT set only */
|
|
unsigned long ramrod_flags;
|
|
|
|
/* BNX2X_RSS_X bits */
|
|
unsigned long rss_flags;
|
|
|
|
/* Number hash bits to take into an account */
|
|
u8 rss_result_mask;
|
|
|
|
/* Indirection table */
|
|
u8 ind_table[T_ETH_INDIRECTION_TABLE_SIZE];
|
|
|
|
/* RSS hash values */
|
|
u32 rss_key[10];
|
|
|
|
/* valid only iff BNX2X_RSS_UPDATE_TOE is set */
|
|
u16 toe_rss_bitmap;
|
|
};
|
|
|
|
struct bnx2x_rss_config_obj {
|
|
struct bnx2x_raw_obj raw;
|
|
|
|
/* RSS engine to use */
|
|
u8 engine_id;
|
|
|
|
/* Last configured indirection table */
|
|
u8 ind_table[T_ETH_INDIRECTION_TABLE_SIZE];
|
|
|
|
/* flags for enabling 4-tupple hash on UDP */
|
|
u8 udp_rss_v4;
|
|
u8 udp_rss_v6;
|
|
|
|
int (*config_rss)(struct bnx2x *bp,
|
|
struct bnx2x_config_rss_params *p);
|
|
};
|
|
|
|
/*********************** Queue state update ***********************************/
|
|
|
|
/* UPDATE command options */
|
|
enum {
|
|
BNX2X_Q_UPDATE_IN_VLAN_REM,
|
|
BNX2X_Q_UPDATE_IN_VLAN_REM_CHNG,
|
|
BNX2X_Q_UPDATE_OUT_VLAN_REM,
|
|
BNX2X_Q_UPDATE_OUT_VLAN_REM_CHNG,
|
|
BNX2X_Q_UPDATE_ANTI_SPOOF,
|
|
BNX2X_Q_UPDATE_ANTI_SPOOF_CHNG,
|
|
BNX2X_Q_UPDATE_ACTIVATE,
|
|
BNX2X_Q_UPDATE_ACTIVATE_CHNG,
|
|
BNX2X_Q_UPDATE_DEF_VLAN_EN,
|
|
BNX2X_Q_UPDATE_DEF_VLAN_EN_CHNG,
|
|
BNX2X_Q_UPDATE_SILENT_VLAN_REM_CHNG,
|
|
BNX2X_Q_UPDATE_SILENT_VLAN_REM
|
|
};
|
|
|
|
/* Allowed Queue states */
|
|
enum bnx2x_q_state {
|
|
BNX2X_Q_STATE_RESET,
|
|
BNX2X_Q_STATE_INITIALIZED,
|
|
BNX2X_Q_STATE_ACTIVE,
|
|
BNX2X_Q_STATE_MULTI_COS,
|
|
BNX2X_Q_STATE_MCOS_TERMINATED,
|
|
BNX2X_Q_STATE_INACTIVE,
|
|
BNX2X_Q_STATE_STOPPED,
|
|
BNX2X_Q_STATE_TERMINATED,
|
|
BNX2X_Q_STATE_FLRED,
|
|
BNX2X_Q_STATE_MAX,
|
|
};
|
|
|
|
/* Allowed commands */
|
|
enum bnx2x_queue_cmd {
|
|
BNX2X_Q_CMD_INIT,
|
|
BNX2X_Q_CMD_SETUP,
|
|
BNX2X_Q_CMD_SETUP_TX_ONLY,
|
|
BNX2X_Q_CMD_DEACTIVATE,
|
|
BNX2X_Q_CMD_ACTIVATE,
|
|
BNX2X_Q_CMD_UPDATE,
|
|
BNX2X_Q_CMD_UPDATE_TPA,
|
|
BNX2X_Q_CMD_HALT,
|
|
BNX2X_Q_CMD_CFC_DEL,
|
|
BNX2X_Q_CMD_TERMINATE,
|
|
BNX2X_Q_CMD_EMPTY,
|
|
BNX2X_Q_CMD_MAX,
|
|
};
|
|
|
|
/* queue SETUP + INIT flags */
|
|
enum {
|
|
BNX2X_Q_FLG_TPA,
|
|
BNX2X_Q_FLG_TPA_IPV6,
|
|
BNX2X_Q_FLG_TPA_GRO,
|
|
BNX2X_Q_FLG_STATS,
|
|
BNX2X_Q_FLG_ZERO_STATS,
|
|
BNX2X_Q_FLG_ACTIVE,
|
|
BNX2X_Q_FLG_OV,
|
|
BNX2X_Q_FLG_VLAN,
|
|
BNX2X_Q_FLG_COS,
|
|
BNX2X_Q_FLG_HC,
|
|
BNX2X_Q_FLG_HC_EN,
|
|
BNX2X_Q_FLG_DHC,
|
|
BNX2X_Q_FLG_FCOE,
|
|
BNX2X_Q_FLG_LEADING_RSS,
|
|
BNX2X_Q_FLG_MCAST,
|
|
BNX2X_Q_FLG_DEF_VLAN,
|
|
BNX2X_Q_FLG_TX_SWITCH,
|
|
BNX2X_Q_FLG_TX_SEC,
|
|
BNX2X_Q_FLG_ANTI_SPOOF,
|
|
BNX2X_Q_FLG_SILENT_VLAN_REM,
|
|
BNX2X_Q_FLG_FORCE_DEFAULT_PRI
|
|
};
|
|
|
|
/* Queue type options: queue type may be a compination of below. */
|
|
enum bnx2x_q_type {
|
|
/** TODO: Consider moving both these flags into the init()
|
|
* ramrod params.
|
|
*/
|
|
BNX2X_Q_TYPE_HAS_RX,
|
|
BNX2X_Q_TYPE_HAS_TX,
|
|
};
|
|
|
|
#define BNX2X_PRIMARY_CID_INDEX 0
|
|
#define BNX2X_MULTI_TX_COS_E1X 3 /* QM only */
|
|
#define BNX2X_MULTI_TX_COS_E2_E3A0 2
|
|
#define BNX2X_MULTI_TX_COS_E3B0 3
|
|
#define BNX2X_MULTI_TX_COS 3 /* Maximum possible */
|
|
|
|
|
|
struct bnx2x_queue_init_params {
|
|
struct {
|
|
unsigned long flags;
|
|
u16 hc_rate;
|
|
u8 fw_sb_id;
|
|
u8 sb_cq_index;
|
|
} tx;
|
|
|
|
struct {
|
|
unsigned long flags;
|
|
u16 hc_rate;
|
|
u8 fw_sb_id;
|
|
u8 sb_cq_index;
|
|
} rx;
|
|
|
|
/* CID context in the host memory */
|
|
struct eth_context *cxts[BNX2X_MULTI_TX_COS];
|
|
|
|
/* maximum number of cos supported by hardware */
|
|
u8 max_cos;
|
|
};
|
|
|
|
struct bnx2x_queue_terminate_params {
|
|
/* index within the tx_only cids of this queue object */
|
|
u8 cid_index;
|
|
};
|
|
|
|
struct bnx2x_queue_cfc_del_params {
|
|
/* index within the tx_only cids of this queue object */
|
|
u8 cid_index;
|
|
};
|
|
|
|
struct bnx2x_queue_update_params {
|
|
unsigned long update_flags; /* BNX2X_Q_UPDATE_XX bits */
|
|
u16 def_vlan;
|
|
u16 silent_removal_value;
|
|
u16 silent_removal_mask;
|
|
/* index within the tx_only cids of this queue object */
|
|
u8 cid_index;
|
|
};
|
|
|
|
struct rxq_pause_params {
|
|
u16 bd_th_lo;
|
|
u16 bd_th_hi;
|
|
u16 rcq_th_lo;
|
|
u16 rcq_th_hi;
|
|
u16 sge_th_lo; /* valid iff BNX2X_Q_FLG_TPA */
|
|
u16 sge_th_hi; /* valid iff BNX2X_Q_FLG_TPA */
|
|
u16 pri_map;
|
|
};
|
|
|
|
/* general */
|
|
struct bnx2x_general_setup_params {
|
|
/* valid iff BNX2X_Q_FLG_STATS */
|
|
u8 stat_id;
|
|
|
|
u8 spcl_id;
|
|
u16 mtu;
|
|
u8 cos;
|
|
};
|
|
|
|
struct bnx2x_rxq_setup_params {
|
|
/* dma */
|
|
dma_addr_t dscr_map;
|
|
dma_addr_t sge_map;
|
|
dma_addr_t rcq_map;
|
|
dma_addr_t rcq_np_map;
|
|
|
|
u16 drop_flags;
|
|
u16 buf_sz;
|
|
u8 fw_sb_id;
|
|
u8 cl_qzone_id;
|
|
|
|
/* valid iff BNX2X_Q_FLG_TPA */
|
|
u16 tpa_agg_sz;
|
|
u16 sge_buf_sz;
|
|
u8 max_sges_pkt;
|
|
u8 max_tpa_queues;
|
|
u8 rss_engine_id;
|
|
|
|
/* valid iff BNX2X_Q_FLG_MCAST */
|
|
u8 mcast_engine_id;
|
|
|
|
u8 cache_line_log;
|
|
|
|
u8 sb_cq_index;
|
|
|
|
/* valid iff BXN2X_Q_FLG_SILENT_VLAN_REM */
|
|
u16 silent_removal_value;
|
|
u16 silent_removal_mask;
|
|
};
|
|
|
|
struct bnx2x_txq_setup_params {
|
|
/* dma */
|
|
dma_addr_t dscr_map;
|
|
|
|
u8 fw_sb_id;
|
|
u8 sb_cq_index;
|
|
u8 cos; /* valid iff BNX2X_Q_FLG_COS */
|
|
u16 traffic_type;
|
|
/* equals to the leading rss client id, used for TX classification*/
|
|
u8 tss_leading_cl_id;
|
|
|
|
/* valid iff BNX2X_Q_FLG_DEF_VLAN */
|
|
u16 default_vlan;
|
|
};
|
|
|
|
struct bnx2x_queue_setup_params {
|
|
struct bnx2x_general_setup_params gen_params;
|
|
struct bnx2x_txq_setup_params txq_params;
|
|
struct bnx2x_rxq_setup_params rxq_params;
|
|
struct rxq_pause_params pause_params;
|
|
unsigned long flags;
|
|
};
|
|
|
|
struct bnx2x_queue_setup_tx_only_params {
|
|
struct bnx2x_general_setup_params gen_params;
|
|
struct bnx2x_txq_setup_params txq_params;
|
|
unsigned long flags;
|
|
/* index within the tx_only cids of this queue object */
|
|
u8 cid_index;
|
|
};
|
|
|
|
struct bnx2x_queue_state_params {
|
|
struct bnx2x_queue_sp_obj *q_obj;
|
|
|
|
/* Current command */
|
|
enum bnx2x_queue_cmd cmd;
|
|
|
|
/* may have RAMROD_COMP_WAIT set only */
|
|
unsigned long ramrod_flags;
|
|
|
|
/* Params according to the current command */
|
|
union {
|
|
struct bnx2x_queue_update_params update;
|
|
struct bnx2x_queue_setup_params setup;
|
|
struct bnx2x_queue_init_params init;
|
|
struct bnx2x_queue_setup_tx_only_params tx_only;
|
|
struct bnx2x_queue_terminate_params terminate;
|
|
struct bnx2x_queue_cfc_del_params cfc_del;
|
|
} params;
|
|
};
|
|
|
|
struct bnx2x_viflist_params {
|
|
u8 echo_res;
|
|
u8 func_bit_map_res;
|
|
};
|
|
|
|
struct bnx2x_queue_sp_obj {
|
|
u32 cids[BNX2X_MULTI_TX_COS];
|
|
u8 cl_id;
|
|
u8 func_id;
|
|
|
|
/*
|
|
* number of traffic classes supported by queue.
|
|
* The primary connection of the queue suppotrs the first traffic
|
|
* class. Any further traffic class is suppoted by a tx-only
|
|
* connection.
|
|
*
|
|
* Therefore max_cos is also a number of valid entries in the cids
|
|
* array.
|
|
*/
|
|
u8 max_cos;
|
|
u8 num_tx_only, next_tx_only;
|
|
|
|
enum bnx2x_q_state state, next_state;
|
|
|
|
/* bits from enum bnx2x_q_type */
|
|
unsigned long type;
|
|
|
|
/* BNX2X_Q_CMD_XX bits. This object implements "one
|
|
* pending" paradigm but for debug and tracing purposes it's
|
|
* more convinient to have different bits for different
|
|
* commands.
|
|
*/
|
|
unsigned long pending;
|
|
|
|
/* Buffer to use as a ramrod data and its mapping */
|
|
void *rdata;
|
|
dma_addr_t rdata_mapping;
|
|
|
|
/**
|
|
* Performs one state change according to the given parameters.
|
|
*
|
|
* @return 0 in case of success and negative value otherwise.
|
|
*/
|
|
int (*send_cmd)(struct bnx2x *bp,
|
|
struct bnx2x_queue_state_params *params);
|
|
|
|
/**
|
|
* Sets the pending bit according to the requested transition.
|
|
*/
|
|
int (*set_pending)(struct bnx2x_queue_sp_obj *o,
|
|
struct bnx2x_queue_state_params *params);
|
|
|
|
/**
|
|
* Checks that the requested state transition is legal.
|
|
*/
|
|
int (*check_transition)(struct bnx2x *bp,
|
|
struct bnx2x_queue_sp_obj *o,
|
|
struct bnx2x_queue_state_params *params);
|
|
|
|
/**
|
|
* Completes the pending command.
|
|
*/
|
|
int (*complete_cmd)(struct bnx2x *bp,
|
|
struct bnx2x_queue_sp_obj *o,
|
|
enum bnx2x_queue_cmd);
|
|
|
|
int (*wait_comp)(struct bnx2x *bp,
|
|
struct bnx2x_queue_sp_obj *o,
|
|
enum bnx2x_queue_cmd cmd);
|
|
};
|
|
|
|
/********************** Function state update *********************************/
|
|
/* Allowed Function states */
|
|
enum bnx2x_func_state {
|
|
BNX2X_F_STATE_RESET,
|
|
BNX2X_F_STATE_INITIALIZED,
|
|
BNX2X_F_STATE_STARTED,
|
|
BNX2X_F_STATE_TX_STOPPED,
|
|
BNX2X_F_STATE_MAX,
|
|
};
|
|
|
|
/* Allowed Function commands */
|
|
enum bnx2x_func_cmd {
|
|
BNX2X_F_CMD_HW_INIT,
|
|
BNX2X_F_CMD_START,
|
|
BNX2X_F_CMD_STOP,
|
|
BNX2X_F_CMD_HW_RESET,
|
|
BNX2X_F_CMD_AFEX_UPDATE,
|
|
BNX2X_F_CMD_AFEX_VIFLISTS,
|
|
BNX2X_F_CMD_TX_STOP,
|
|
BNX2X_F_CMD_TX_START,
|
|
BNX2X_F_CMD_MAX,
|
|
};
|
|
|
|
struct bnx2x_func_hw_init_params {
|
|
/* A load phase returned by MCP.
|
|
*
|
|
* May be:
|
|
* FW_MSG_CODE_DRV_LOAD_COMMON_CHIP
|
|
* FW_MSG_CODE_DRV_LOAD_COMMON
|
|
* FW_MSG_CODE_DRV_LOAD_PORT
|
|
* FW_MSG_CODE_DRV_LOAD_FUNCTION
|
|
*/
|
|
u32 load_phase;
|
|
};
|
|
|
|
struct bnx2x_func_hw_reset_params {
|
|
/* A load phase returned by MCP.
|
|
*
|
|
* May be:
|
|
* FW_MSG_CODE_DRV_LOAD_COMMON_CHIP
|
|
* FW_MSG_CODE_DRV_LOAD_COMMON
|
|
* FW_MSG_CODE_DRV_LOAD_PORT
|
|
* FW_MSG_CODE_DRV_LOAD_FUNCTION
|
|
*/
|
|
u32 reset_phase;
|
|
};
|
|
|
|
struct bnx2x_func_start_params {
|
|
/* Multi Function mode:
|
|
* - Single Function
|
|
* - Switch Dependent
|
|
* - Switch Independent
|
|
*/
|
|
u16 mf_mode;
|
|
|
|
/* Switch Dependent mode outer VLAN tag */
|
|
u16 sd_vlan_tag;
|
|
|
|
/* Function cos mode */
|
|
u8 network_cos_mode;
|
|
};
|
|
|
|
struct bnx2x_func_afex_update_params {
|
|
u16 vif_id;
|
|
u16 afex_default_vlan;
|
|
u8 allowed_priorities;
|
|
};
|
|
|
|
struct bnx2x_func_afex_viflists_params {
|
|
u16 vif_list_index;
|
|
u8 func_bit_map;
|
|
u8 afex_vif_list_command;
|
|
u8 func_to_clear;
|
|
};
|
|
struct bnx2x_func_tx_start_params {
|
|
struct priority_cos traffic_type_to_priority_cos[MAX_TRAFFIC_TYPES];
|
|
u8 dcb_enabled;
|
|
u8 dcb_version;
|
|
u8 dont_add_pri_0_en;
|
|
};
|
|
|
|
struct bnx2x_func_state_params {
|
|
struct bnx2x_func_sp_obj *f_obj;
|
|
|
|
/* Current command */
|
|
enum bnx2x_func_cmd cmd;
|
|
|
|
/* may have RAMROD_COMP_WAIT set only */
|
|
unsigned long ramrod_flags;
|
|
|
|
/* Params according to the current command */
|
|
union {
|
|
struct bnx2x_func_hw_init_params hw_init;
|
|
struct bnx2x_func_hw_reset_params hw_reset;
|
|
struct bnx2x_func_start_params start;
|
|
struct bnx2x_func_afex_update_params afex_update;
|
|
struct bnx2x_func_afex_viflists_params afex_viflists;
|
|
struct bnx2x_func_tx_start_params tx_start;
|
|
} params;
|
|
};
|
|
|
|
struct bnx2x_func_sp_drv_ops {
|
|
/* Init tool + runtime initialization:
|
|
* - Common Chip
|
|
* - Common (per Path)
|
|
* - Port
|
|
* - Function phases
|
|
*/
|
|
int (*init_hw_cmn_chip)(struct bnx2x *bp);
|
|
int (*init_hw_cmn)(struct bnx2x *bp);
|
|
int (*init_hw_port)(struct bnx2x *bp);
|
|
int (*init_hw_func)(struct bnx2x *bp);
|
|
|
|
/* Reset Function HW: Common, Port, Function phases. */
|
|
void (*reset_hw_cmn)(struct bnx2x *bp);
|
|
void (*reset_hw_port)(struct bnx2x *bp);
|
|
void (*reset_hw_func)(struct bnx2x *bp);
|
|
|
|
/* Init/Free GUNZIP resources */
|
|
int (*gunzip_init)(struct bnx2x *bp);
|
|
void (*gunzip_end)(struct bnx2x *bp);
|
|
|
|
/* Prepare/Release FW resources */
|
|
int (*init_fw)(struct bnx2x *bp);
|
|
void (*release_fw)(struct bnx2x *bp);
|
|
};
|
|
|
|
struct bnx2x_func_sp_obj {
|
|
enum bnx2x_func_state state, next_state;
|
|
|
|
/* BNX2X_FUNC_CMD_XX bits. This object implements "one
|
|
* pending" paradigm but for debug and tracing purposes it's
|
|
* more convinient to have different bits for different
|
|
* commands.
|
|
*/
|
|
unsigned long pending;
|
|
|
|
/* Buffer to use as a ramrod data and its mapping */
|
|
void *rdata;
|
|
dma_addr_t rdata_mapping;
|
|
|
|
/* Buffer to use as a afex ramrod data and its mapping.
|
|
* This can't be same rdata as above because afex ramrod requests
|
|
* can arrive to the object in parallel to other ramrod requests.
|
|
*/
|
|
void *afex_rdata;
|
|
dma_addr_t afex_rdata_mapping;
|
|
|
|
/* this mutex validates that when pending flag is taken, the next
|
|
* ramrod to be sent will be the one set the pending bit
|
|
*/
|
|
struct mutex one_pending_mutex;
|
|
|
|
/* Driver interface */
|
|
struct bnx2x_func_sp_drv_ops *drv;
|
|
|
|
/**
|
|
* Performs one state change according to the given parameters.
|
|
*
|
|
* @return 0 in case of success and negative value otherwise.
|
|
*/
|
|
int (*send_cmd)(struct bnx2x *bp,
|
|
struct bnx2x_func_state_params *params);
|
|
|
|
/**
|
|
* Checks that the requested state transition is legal.
|
|
*/
|
|
int (*check_transition)(struct bnx2x *bp,
|
|
struct bnx2x_func_sp_obj *o,
|
|
struct bnx2x_func_state_params *params);
|
|
|
|
/**
|
|
* Completes the pending command.
|
|
*/
|
|
int (*complete_cmd)(struct bnx2x *bp,
|
|
struct bnx2x_func_sp_obj *o,
|
|
enum bnx2x_func_cmd cmd);
|
|
|
|
int (*wait_comp)(struct bnx2x *bp, struct bnx2x_func_sp_obj *o,
|
|
enum bnx2x_func_cmd cmd);
|
|
};
|
|
|
|
/********************** Interfaces ********************************************/
|
|
/* Queueable objects set */
|
|
union bnx2x_qable_obj {
|
|
struct bnx2x_vlan_mac_obj vlan_mac;
|
|
};
|
|
/************** Function state update *********/
|
|
void bnx2x_init_func_obj(struct bnx2x *bp,
|
|
struct bnx2x_func_sp_obj *obj,
|
|
void *rdata, dma_addr_t rdata_mapping,
|
|
void *afex_rdata, dma_addr_t afex_rdata_mapping,
|
|
struct bnx2x_func_sp_drv_ops *drv_iface);
|
|
|
|
int bnx2x_func_state_change(struct bnx2x *bp,
|
|
struct bnx2x_func_state_params *params);
|
|
|
|
enum bnx2x_func_state bnx2x_func_get_state(struct bnx2x *bp,
|
|
struct bnx2x_func_sp_obj *o);
|
|
/******************* Queue State **************/
|
|
void bnx2x_init_queue_obj(struct bnx2x *bp,
|
|
struct bnx2x_queue_sp_obj *obj, u8 cl_id, u32 *cids,
|
|
u8 cid_cnt, u8 func_id, void *rdata,
|
|
dma_addr_t rdata_mapping, unsigned long type);
|
|
|
|
int bnx2x_queue_state_change(struct bnx2x *bp,
|
|
struct bnx2x_queue_state_params *params);
|
|
|
|
/********************* VLAN-MAC ****************/
|
|
void bnx2x_init_mac_obj(struct bnx2x *bp,
|
|
struct bnx2x_vlan_mac_obj *mac_obj,
|
|
u8 cl_id, u32 cid, u8 func_id, void *rdata,
|
|
dma_addr_t rdata_mapping, int state,
|
|
unsigned long *pstate, bnx2x_obj_type type,
|
|
struct bnx2x_credit_pool_obj *macs_pool);
|
|
|
|
void bnx2x_init_vlan_obj(struct bnx2x *bp,
|
|
struct bnx2x_vlan_mac_obj *vlan_obj,
|
|
u8 cl_id, u32 cid, u8 func_id, void *rdata,
|
|
dma_addr_t rdata_mapping, int state,
|
|
unsigned long *pstate, bnx2x_obj_type type,
|
|
struct bnx2x_credit_pool_obj *vlans_pool);
|
|
|
|
void bnx2x_init_vlan_mac_obj(struct bnx2x *bp,
|
|
struct bnx2x_vlan_mac_obj *vlan_mac_obj,
|
|
u8 cl_id, u32 cid, u8 func_id, void *rdata,
|
|
dma_addr_t rdata_mapping, int state,
|
|
unsigned long *pstate, bnx2x_obj_type type,
|
|
struct bnx2x_credit_pool_obj *macs_pool,
|
|
struct bnx2x_credit_pool_obj *vlans_pool);
|
|
|
|
int bnx2x_config_vlan_mac(struct bnx2x *bp,
|
|
struct bnx2x_vlan_mac_ramrod_params *p);
|
|
|
|
int bnx2x_vlan_mac_move(struct bnx2x *bp,
|
|
struct bnx2x_vlan_mac_ramrod_params *p,
|
|
struct bnx2x_vlan_mac_obj *dest_o);
|
|
|
|
/********************* RX MODE ****************/
|
|
|
|
void bnx2x_init_rx_mode_obj(struct bnx2x *bp,
|
|
struct bnx2x_rx_mode_obj *o);
|
|
|
|
/**
|
|
* Send and RX_MODE ramrod according to the provided parameters.
|
|
*
|
|
* @param bp
|
|
* @param p Command parameters
|
|
*
|
|
* @return 0 - if operation was successfull and there is no pending completions,
|
|
* positive number - if there are pending completions,
|
|
* negative - if there were errors
|
|
*/
|
|
int bnx2x_config_rx_mode(struct bnx2x *bp,
|
|
struct bnx2x_rx_mode_ramrod_params *p);
|
|
|
|
/****************** MULTICASTS ****************/
|
|
|
|
void bnx2x_init_mcast_obj(struct bnx2x *bp,
|
|
struct bnx2x_mcast_obj *mcast_obj,
|
|
u8 mcast_cl_id, u32 mcast_cid, u8 func_id,
|
|
u8 engine_id, void *rdata, dma_addr_t rdata_mapping,
|
|
int state, unsigned long *pstate,
|
|
bnx2x_obj_type type);
|
|
|
|
/**
|
|
* Configure multicast MACs list. May configure a new list
|
|
* provided in p->mcast_list (BNX2X_MCAST_CMD_ADD), clean up
|
|
* (BNX2X_MCAST_CMD_DEL) or restore (BNX2X_MCAST_CMD_RESTORE) a current
|
|
* configuration, continue to execute the pending commands
|
|
* (BNX2X_MCAST_CMD_CONT).
|
|
*
|
|
* If previous command is still pending or if number of MACs to
|
|
* configure is more that maximum number of MACs in one command,
|
|
* the current command will be enqueued to the tail of the
|
|
* pending commands list.
|
|
*
|
|
* @param bp
|
|
* @param p
|
|
* @param command to execute: BNX2X_MCAST_CMD_X
|
|
*
|
|
* @return 0 is operation was sucessfull and there are no pending completions,
|
|
* negative if there were errors, positive if there are pending
|
|
* completions.
|
|
*/
|
|
int bnx2x_config_mcast(struct bnx2x *bp,
|
|
struct bnx2x_mcast_ramrod_params *p, int cmd);
|
|
|
|
/****************** CREDIT POOL ****************/
|
|
void bnx2x_init_mac_credit_pool(struct bnx2x *bp,
|
|
struct bnx2x_credit_pool_obj *p, u8 func_id,
|
|
u8 func_num);
|
|
void bnx2x_init_vlan_credit_pool(struct bnx2x *bp,
|
|
struct bnx2x_credit_pool_obj *p, u8 func_id,
|
|
u8 func_num);
|
|
|
|
|
|
/****************** RSS CONFIGURATION ****************/
|
|
void bnx2x_init_rss_config_obj(struct bnx2x *bp,
|
|
struct bnx2x_rss_config_obj *rss_obj,
|
|
u8 cl_id, u32 cid, u8 func_id, u8 engine_id,
|
|
void *rdata, dma_addr_t rdata_mapping,
|
|
int state, unsigned long *pstate,
|
|
bnx2x_obj_type type);
|
|
|
|
/**
|
|
* Updates RSS configuration according to provided parameters.
|
|
*
|
|
* @param bp
|
|
* @param p
|
|
*
|
|
* @return 0 in case of success
|
|
*/
|
|
int bnx2x_config_rss(struct bnx2x *bp,
|
|
struct bnx2x_config_rss_params *p);
|
|
|
|
/**
|
|
* Return the current ind_table configuration.
|
|
*
|
|
* @param bp
|
|
* @param ind_table buffer to fill with the current indirection
|
|
* table content. Should be at least
|
|
* T_ETH_INDIRECTION_TABLE_SIZE bytes long.
|
|
*/
|
|
void bnx2x_get_rss_ind_table(struct bnx2x_rss_config_obj *rss_obj,
|
|
u8 *ind_table);
|
|
|
|
#endif /* BNX2X_SP_VERBS */
|