linux/drivers/usb
Douglas Anderson 9f9f09b048 usb: dwc2: host: Totally redo the microframe scheduler
This totally reimplements the microframe scheduler in dwc2 to attempt to
handle periodic splits properly.  The old code didn't even try, so this
was a significant effort since periodic splits are one of the most
complicated things in USB.

I've attempted to keep the old "don't use the microframe" schduler
around for now, but not sure it's needed.  It has also only been lightly
tested.

I think it's pretty certain that this scheduler isn't perfect and might
have some bugs, but it seems much better than what was there before.
With this change my stressful USB test (USB webcam + USB audio + some
keyboards) crackles less.

Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-04 15:14:45 +02:00
..
atm USB: cxacru: fix an bounds check warning 2016-02-03 13:52:10 -08:00
c67x00 c67x00-hcd: use USB_DT_HUB 2015-04-03 19:03:16 +02:00
chipidea usb: chipidea: otg: add A idle to B disconnect timer 2016-03-04 15:14:38 +02:00
class usb: usbtmc: Fix disconnect/poll interaction 2016-02-20 20:21:53 -08:00
common usb: common: otg-fsm: add HNP polling support 2016-03-04 15:14:36 +02:00
core Merge 4.5-rc6 into usb-next 2016-03-01 16:13:54 -08:00
dwc2 usb: dwc2: host: Totally redo the microframe scheduler 2016-03-04 15:14:45 +02:00
dwc3 usb: dwc3: Validate the maximum_speed parameter 2016-03-04 15:14:38 +02:00
early
gadget usb: gadget: composite: handle otg status selector request from OTG host 2016-03-04 15:14:36 +02:00
host usb: fsl: drop USB_FSL_MPH_DR_OF Kconfig symbol 2016-03-04 15:14:29 +02:00
image scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
isp1760 usb: isp1760: udc: add ep capabilities support 2015-08-04 12:26:55 -05:00
misc usb/misc/chaoskey: introduce an URB for asynchronous reads 2016-02-20 20:12:21 -08:00
mon usb: core: rename mutex usb_bus_list_lock to usb_bus_idr_lock 2016-02-06 21:55:57 -08:00
musb usb: musb: sunxi: support module autoloading 2016-03-04 15:14:38 +02:00
phy usb: phy: phy-am335x: remove include of regulator/consumer.h 2016-03-04 15:14:31 +02:00
renesas_usbhs usb: renesas_usbhs: Don't check CSSTS bit if peripheral mode 2016-03-04 15:14:28 +02:00
serial USB: option: add "4G LTE usb-modem U901" 2016-02-18 13:08:03 +01:00
storage usb: storage: use usb_store_dbg instead of US_DEBUGPX 2016-02-20 20:21:53 -08:00
usbip usb: usbip: Fix possible deadlocks reported by lockdep 2016-02-03 13:52:10 -08:00
wusbcore USB: core, wusbcore: use bus_to_hcd 2016-01-24 21:00:33 -08:00
Kconfig usb: isp1760: Move driver from drivers/usb/host/ to drivers/usb/isp1760/ 2015-01-27 09:39:38 -06:00
Makefile usb: fsl: drop USB_FSL_MPH_DR_OF Kconfig symbol 2016-03-04 15:14:29 +02:00
README
usb-skeleton.c

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.