Jisheng Zhang d6956ac87b net: mvneta: set rx mode during resume if interface is running ... I found a bug by: 0. boot and start dhcp client 1. echo mem > /sys/power/state 2. resume back immediately 3. don't touch dhcp client to renew the lease 4. ping the gateway. No acks Usually, after step2, the DHCP lease isn't expired, so in theory we should resume all back. But in fact, it doesn't. It turns out the rx mode isn't resumed correctly. This patch fixes it by adding mvneta_set_rx_mode(dev) in the resume hook if interface is running. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>		2017-03-29 14:08:57 -07:00
..
Kconfig	net: mvpp2: finally add the PPv2.2 compatible string	2017-03-09 10:12:11 -08:00
Makefile	net: mvneta: bm: add support for hardware buffer management	2016-03-14 12:19:46 -04:00
mv643xx_eth.c	net: mv643xx_eth: Do not clobber PHY link outside of state machine	2017-02-07 13:48:21 -05:00
mvmdio.c	net: mvmdio: do not clk_disable_unprepare() NULL clock	2016-10-03 02:03:27 -04:00
mvneta_bm.c	net: mvneta: Fix lacking spinlock initialization	2016-05-25 12:35:08 -07:00
mvneta_bm.h	net: mvneta: use IS_ENABLED() instead of checking for built-in or module	2016-09-12 20:27:59 -07:00
mvneta.c	net: mvneta: set rx mode during resume if interface is running	2017-03-29 14:08:57 -07:00
mvpp2.c	net: mvpp2: finally add the PPv2.2 compatible string	2017-03-09 10:12:11 -08:00
pxa168_eth.c	net: pxa168_eth: Do not clobber PHY link outside of state machine	2017-02-07 13:48:21 -05:00
skge.c	skge: use napi_complete_done()	2017-02-05 16:11:57 -05:00
skge.h	skge: Rename LED_OFF and LED_ON in marvel skge driver to avoid conflicts with leds namespace	2016-10-18 11:56:30 -04:00
sky2.c	net: Remove usage of net_device last_rx member	2017-01-18 17:22:49 -05:00
sky2.h	net: Remove usage of net_device last_rx member	2017-01-18 17:22:49 -05:00