forked from Minki/linux
da004c3600
This adds a iommu_table_ops struct and puts pointer to it into the iommu_table struct. This moves tce_build/tce_free/tce_get/tce_flush callbacks from ppc_md to the new struct where they really belong to. This adds the requirement for @it_ops to be initialized before calling iommu_init_table() to make sure that we do not leave any IOMMU table with iommu_table_ops uninitialized. This is not a parameter of iommu_init_table() though as there will be cases when iommu_init_table() will not be called on TCE tables, for example - VFIO. This does s/tce_build/set/, s/tce_free/clear/ and removes "tce_" redundant prefixes. This removes tce_xxx_rm handlers from ppc_md but does not add them to iommu_table_ops as this will be done later if we decide to support TCE hypercalls in real mode. This removes _vm callbacks as only virtual mode is supported by now so this also removes @rm parameter. For pSeries, this always uses tce_buildmulti_pSeriesLP/ tce_buildmulti_pSeriesLP. This changes multi callback to fall back to tce_build_pSeriesLP/tce_free_pSeriesLP if FW_FEATURE_MULTITCE is not present. The reason for this is we still have to support "multitce=off" boot parameter in disable_multitce() and we do not want to walk through all IOMMU tables in the system and replace "multi" callbacks with single ones. For powernv, this defines _ops per PHB type which are P5IOC2/IODA1/IODA2. This makes the callbacks for them public. Later patches will extend callbacks for IODA1/2. No change in behaviour is expected. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
1242 lines
35 KiB
C
1242 lines
35 KiB
C
/*
|
|
* IOMMU implementation for Cell Broadband Processor Architecture
|
|
*
|
|
* (C) Copyright IBM Corporation 2006-2008
|
|
*
|
|
* Author: Jeremy Kerr <jk@ozlabs.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#undef DEBUG
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/notifier.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/memblock.h>
|
|
|
|
#include <asm/prom.h>
|
|
#include <asm/iommu.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/pci-bridge.h>
|
|
#include <asm/udbg.h>
|
|
#include <asm/firmware.h>
|
|
#include <asm/cell-regs.h>
|
|
|
|
#include "cell.h"
|
|
#include "interrupt.h"
|
|
|
|
/* Define CELL_IOMMU_REAL_UNMAP to actually unmap non-used pages
|
|
* instead of leaving them mapped to some dummy page. This can be
|
|
* enabled once the appropriate workarounds for spider bugs have
|
|
* been enabled
|
|
*/
|
|
#define CELL_IOMMU_REAL_UNMAP
|
|
|
|
/* Define CELL_IOMMU_STRICT_PROTECTION to enforce protection of
|
|
* IO PTEs based on the transfer direction. That can be enabled
|
|
* once spider-net has been fixed to pass the correct direction
|
|
* to the DMA mapping functions
|
|
*/
|
|
#define CELL_IOMMU_STRICT_PROTECTION
|
|
|
|
|
|
#define NR_IOMMUS 2
|
|
|
|
/* IOC mmap registers */
|
|
#define IOC_Reg_Size 0x2000
|
|
|
|
#define IOC_IOPT_CacheInvd 0x908
|
|
#define IOC_IOPT_CacheInvd_NE_Mask 0xffe0000000000000ul
|
|
#define IOC_IOPT_CacheInvd_IOPTE_Mask 0x000003fffffffff8ul
|
|
#define IOC_IOPT_CacheInvd_Busy 0x0000000000000001ul
|
|
|
|
#define IOC_IOST_Origin 0x918
|
|
#define IOC_IOST_Origin_E 0x8000000000000000ul
|
|
#define IOC_IOST_Origin_HW 0x0000000000000800ul
|
|
#define IOC_IOST_Origin_HL 0x0000000000000400ul
|
|
|
|
#define IOC_IO_ExcpStat 0x920
|
|
#define IOC_IO_ExcpStat_V 0x8000000000000000ul
|
|
#define IOC_IO_ExcpStat_SPF_Mask 0x6000000000000000ul
|
|
#define IOC_IO_ExcpStat_SPF_S 0x6000000000000000ul
|
|
#define IOC_IO_ExcpStat_SPF_P 0x2000000000000000ul
|
|
#define IOC_IO_ExcpStat_ADDR_Mask 0x00000007fffff000ul
|
|
#define IOC_IO_ExcpStat_RW_Mask 0x0000000000000800ul
|
|
#define IOC_IO_ExcpStat_IOID_Mask 0x00000000000007fful
|
|
|
|
#define IOC_IO_ExcpMask 0x928
|
|
#define IOC_IO_ExcpMask_SFE 0x4000000000000000ul
|
|
#define IOC_IO_ExcpMask_PFE 0x2000000000000000ul
|
|
|
|
#define IOC_IOCmd_Offset 0x1000
|
|
|
|
#define IOC_IOCmd_Cfg 0xc00
|
|
#define IOC_IOCmd_Cfg_TE 0x0000800000000000ul
|
|
|
|
|
|
/* Segment table entries */
|
|
#define IOSTE_V 0x8000000000000000ul /* valid */
|
|
#define IOSTE_H 0x4000000000000000ul /* cache hint */
|
|
#define IOSTE_PT_Base_RPN_Mask 0x3ffffffffffff000ul /* base RPN of IOPT */
|
|
#define IOSTE_NPPT_Mask 0x0000000000000fe0ul /* no. pages in IOPT */
|
|
#define IOSTE_PS_Mask 0x0000000000000007ul /* page size */
|
|
#define IOSTE_PS_4K 0x0000000000000001ul /* - 4kB */
|
|
#define IOSTE_PS_64K 0x0000000000000003ul /* - 64kB */
|
|
#define IOSTE_PS_1M 0x0000000000000005ul /* - 1MB */
|
|
#define IOSTE_PS_16M 0x0000000000000007ul /* - 16MB */
|
|
|
|
|
|
/* IOMMU sizing */
|
|
#define IO_SEGMENT_SHIFT 28
|
|
#define IO_PAGENO_BITS(shift) (IO_SEGMENT_SHIFT - (shift))
|
|
|
|
/* The high bit needs to be set on every DMA address */
|
|
#define SPIDER_DMA_OFFSET 0x80000000ul
|
|
|
|
struct iommu_window {
|
|
struct list_head list;
|
|
struct cbe_iommu *iommu;
|
|
unsigned long offset;
|
|
unsigned long size;
|
|
unsigned int ioid;
|
|
struct iommu_table table;
|
|
};
|
|
|
|
#define NAMESIZE 8
|
|
struct cbe_iommu {
|
|
int nid;
|
|
char name[NAMESIZE];
|
|
void __iomem *xlate_regs;
|
|
void __iomem *cmd_regs;
|
|
unsigned long *stab;
|
|
unsigned long *ptab;
|
|
void *pad_page;
|
|
struct list_head windows;
|
|
};
|
|
|
|
/* Static array of iommus, one per node
|
|
* each contains a list of windows, keyed from dma_window property
|
|
* - on bus setup, look for a matching window, or create one
|
|
* - on dev setup, assign iommu_table ptr
|
|
*/
|
|
static struct cbe_iommu iommus[NR_IOMMUS];
|
|
static int cbe_nr_iommus;
|
|
|
|
static void invalidate_tce_cache(struct cbe_iommu *iommu, unsigned long *pte,
|
|
long n_ptes)
|
|
{
|
|
u64 __iomem *reg;
|
|
u64 val;
|
|
long n;
|
|
|
|
reg = iommu->xlate_regs + IOC_IOPT_CacheInvd;
|
|
|
|
while (n_ptes > 0) {
|
|
/* we can invalidate up to 1 << 11 PTEs at once */
|
|
n = min(n_ptes, 1l << 11);
|
|
val = (((n /*- 1*/) << 53) & IOC_IOPT_CacheInvd_NE_Mask)
|
|
| (__pa(pte) & IOC_IOPT_CacheInvd_IOPTE_Mask)
|
|
| IOC_IOPT_CacheInvd_Busy;
|
|
|
|
out_be64(reg, val);
|
|
while (in_be64(reg) & IOC_IOPT_CacheInvd_Busy)
|
|
;
|
|
|
|
n_ptes -= n;
|
|
pte += n;
|
|
}
|
|
}
|
|
|
|
static int tce_build_cell(struct iommu_table *tbl, long index, long npages,
|
|
unsigned long uaddr, enum dma_data_direction direction,
|
|
struct dma_attrs *attrs)
|
|
{
|
|
int i;
|
|
unsigned long *io_pte, base_pte;
|
|
struct iommu_window *window =
|
|
container_of(tbl, struct iommu_window, table);
|
|
|
|
/* implementing proper protection causes problems with the spidernet
|
|
* driver - check mapping directions later, but allow read & write by
|
|
* default for now.*/
|
|
#ifdef CELL_IOMMU_STRICT_PROTECTION
|
|
/* to avoid referencing a global, we use a trick here to setup the
|
|
* protection bit. "prot" is setup to be 3 fields of 4 bits apprended
|
|
* together for each of the 3 supported direction values. It is then
|
|
* shifted left so that the fields matching the desired direction
|
|
* lands on the appropriate bits, and other bits are masked out.
|
|
*/
|
|
const unsigned long prot = 0xc48;
|
|
base_pte =
|
|
((prot << (52 + 4 * direction)) &
|
|
(CBE_IOPTE_PP_W | CBE_IOPTE_PP_R)) |
|
|
CBE_IOPTE_M | CBE_IOPTE_SO_RW |
|
|
(window->ioid & CBE_IOPTE_IOID_Mask);
|
|
#else
|
|
base_pte = CBE_IOPTE_PP_W | CBE_IOPTE_PP_R | CBE_IOPTE_M |
|
|
CBE_IOPTE_SO_RW | (window->ioid & CBE_IOPTE_IOID_Mask);
|
|
#endif
|
|
if (unlikely(dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs)))
|
|
base_pte &= ~CBE_IOPTE_SO_RW;
|
|
|
|
io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset);
|
|
|
|
for (i = 0; i < npages; i++, uaddr += (1 << tbl->it_page_shift))
|
|
io_pte[i] = base_pte | (__pa(uaddr) & CBE_IOPTE_RPN_Mask);
|
|
|
|
mb();
|
|
|
|
invalidate_tce_cache(window->iommu, io_pte, npages);
|
|
|
|
pr_debug("tce_build_cell(index=%lx,n=%lx,dir=%d,base_pte=%lx)\n",
|
|
index, npages, direction, base_pte);
|
|
return 0;
|
|
}
|
|
|
|
static void tce_free_cell(struct iommu_table *tbl, long index, long npages)
|
|
{
|
|
|
|
int i;
|
|
unsigned long *io_pte, pte;
|
|
struct iommu_window *window =
|
|
container_of(tbl, struct iommu_window, table);
|
|
|
|
pr_debug("tce_free_cell(index=%lx,n=%lx)\n", index, npages);
|
|
|
|
#ifdef CELL_IOMMU_REAL_UNMAP
|
|
pte = 0;
|
|
#else
|
|
/* spider bridge does PCI reads after freeing - insert a mapping
|
|
* to a scratch page instead of an invalid entry */
|
|
pte = CBE_IOPTE_PP_R | CBE_IOPTE_M | CBE_IOPTE_SO_RW |
|
|
__pa(window->iommu->pad_page) |
|
|
(window->ioid & CBE_IOPTE_IOID_Mask);
|
|
#endif
|
|
|
|
io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset);
|
|
|
|
for (i = 0; i < npages; i++)
|
|
io_pte[i] = pte;
|
|
|
|
mb();
|
|
|
|
invalidate_tce_cache(window->iommu, io_pte, npages);
|
|
}
|
|
|
|
static irqreturn_t ioc_interrupt(int irq, void *data)
|
|
{
|
|
unsigned long stat, spf;
|
|
struct cbe_iommu *iommu = data;
|
|
|
|
stat = in_be64(iommu->xlate_regs + IOC_IO_ExcpStat);
|
|
spf = stat & IOC_IO_ExcpStat_SPF_Mask;
|
|
|
|
/* Might want to rate limit it */
|
|
printk(KERN_ERR "iommu: DMA exception 0x%016lx\n", stat);
|
|
printk(KERN_ERR " V=%d, SPF=[%c%c], RW=%s, IOID=0x%04x\n",
|
|
!!(stat & IOC_IO_ExcpStat_V),
|
|
(spf == IOC_IO_ExcpStat_SPF_S) ? 'S' : ' ',
|
|
(spf == IOC_IO_ExcpStat_SPF_P) ? 'P' : ' ',
|
|
(stat & IOC_IO_ExcpStat_RW_Mask) ? "Read" : "Write",
|
|
(unsigned int)(stat & IOC_IO_ExcpStat_IOID_Mask));
|
|
printk(KERN_ERR " page=0x%016lx\n",
|
|
stat & IOC_IO_ExcpStat_ADDR_Mask);
|
|
|
|
/* clear interrupt */
|
|
stat &= ~IOC_IO_ExcpStat_V;
|
|
out_be64(iommu->xlate_regs + IOC_IO_ExcpStat, stat);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int cell_iommu_find_ioc(int nid, unsigned long *base)
|
|
{
|
|
struct device_node *np;
|
|
struct resource r;
|
|
|
|
*base = 0;
|
|
|
|
/* First look for new style /be nodes */
|
|
for_each_node_by_name(np, "ioc") {
|
|
if (of_node_to_nid(np) != nid)
|
|
continue;
|
|
if (of_address_to_resource(np, 0, &r)) {
|
|
printk(KERN_ERR "iommu: can't get address for %s\n",
|
|
np->full_name);
|
|
continue;
|
|
}
|
|
*base = r.start;
|
|
of_node_put(np);
|
|
return 0;
|
|
}
|
|
|
|
/* Ok, let's try the old way */
|
|
for_each_node_by_type(np, "cpu") {
|
|
const unsigned int *nidp;
|
|
const unsigned long *tmp;
|
|
|
|
nidp = of_get_property(np, "node-id", NULL);
|
|
if (nidp && *nidp == nid) {
|
|
tmp = of_get_property(np, "ioc-translation", NULL);
|
|
if (tmp) {
|
|
*base = *tmp;
|
|
of_node_put(np);
|
|
return 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
return -ENODEV;
|
|
}
|
|
|
|
static void cell_iommu_setup_stab(struct cbe_iommu *iommu,
|
|
unsigned long dbase, unsigned long dsize,
|
|
unsigned long fbase, unsigned long fsize)
|
|
{
|
|
struct page *page;
|
|
unsigned long segments, stab_size;
|
|
|
|
segments = max(dbase + dsize, fbase + fsize) >> IO_SEGMENT_SHIFT;
|
|
|
|
pr_debug("%s: iommu[%d]: segments: %lu\n",
|
|
__func__, iommu->nid, segments);
|
|
|
|
/* set up the segment table */
|
|
stab_size = segments * sizeof(unsigned long);
|
|
page = alloc_pages_node(iommu->nid, GFP_KERNEL, get_order(stab_size));
|
|
BUG_ON(!page);
|
|
iommu->stab = page_address(page);
|
|
memset(iommu->stab, 0, stab_size);
|
|
}
|
|
|
|
static unsigned long *cell_iommu_alloc_ptab(struct cbe_iommu *iommu,
|
|
unsigned long base, unsigned long size, unsigned long gap_base,
|
|
unsigned long gap_size, unsigned long page_shift)
|
|
{
|
|
struct page *page;
|
|
int i;
|
|
unsigned long reg, segments, pages_per_segment, ptab_size,
|
|
n_pte_pages, start_seg, *ptab;
|
|
|
|
start_seg = base >> IO_SEGMENT_SHIFT;
|
|
segments = size >> IO_SEGMENT_SHIFT;
|
|
pages_per_segment = 1ull << IO_PAGENO_BITS(page_shift);
|
|
/* PTEs for each segment must start on a 4K bounday */
|
|
pages_per_segment = max(pages_per_segment,
|
|
(1 << 12) / sizeof(unsigned long));
|
|
|
|
ptab_size = segments * pages_per_segment * sizeof(unsigned long);
|
|
pr_debug("%s: iommu[%d]: ptab_size: %lu, order: %d\n", __func__,
|
|
iommu->nid, ptab_size, get_order(ptab_size));
|
|
page = alloc_pages_node(iommu->nid, GFP_KERNEL, get_order(ptab_size));
|
|
BUG_ON(!page);
|
|
|
|
ptab = page_address(page);
|
|
memset(ptab, 0, ptab_size);
|
|
|
|
/* number of 4K pages needed for a page table */
|
|
n_pte_pages = (pages_per_segment * sizeof(unsigned long)) >> 12;
|
|
|
|
pr_debug("%s: iommu[%d]: stab at %p, ptab at %p, n_pte_pages: %lu\n",
|
|
__func__, iommu->nid, iommu->stab, ptab,
|
|
n_pte_pages);
|
|
|
|
/* initialise the STEs */
|
|
reg = IOSTE_V | ((n_pte_pages - 1) << 5);
|
|
|
|
switch (page_shift) {
|
|
case 12: reg |= IOSTE_PS_4K; break;
|
|
case 16: reg |= IOSTE_PS_64K; break;
|
|
case 20: reg |= IOSTE_PS_1M; break;
|
|
case 24: reg |= IOSTE_PS_16M; break;
|
|
default: BUG();
|
|
}
|
|
|
|
gap_base = gap_base >> IO_SEGMENT_SHIFT;
|
|
gap_size = gap_size >> IO_SEGMENT_SHIFT;
|
|
|
|
pr_debug("Setting up IOMMU stab:\n");
|
|
for (i = start_seg; i < (start_seg + segments); i++) {
|
|
if (i >= gap_base && i < (gap_base + gap_size)) {
|
|
pr_debug("\toverlap at %d, skipping\n", i);
|
|
continue;
|
|
}
|
|
iommu->stab[i] = reg | (__pa(ptab) + (n_pte_pages << 12) *
|
|
(i - start_seg));
|
|
pr_debug("\t[%d] 0x%016lx\n", i, iommu->stab[i]);
|
|
}
|
|
|
|
return ptab;
|
|
}
|
|
|
|
static void cell_iommu_enable_hardware(struct cbe_iommu *iommu)
|
|
{
|
|
int ret;
|
|
unsigned long reg, xlate_base;
|
|
unsigned int virq;
|
|
|
|
if (cell_iommu_find_ioc(iommu->nid, &xlate_base))
|
|
panic("%s: missing IOC register mappings for node %d\n",
|
|
__func__, iommu->nid);
|
|
|
|
iommu->xlate_regs = ioremap(xlate_base, IOC_Reg_Size);
|
|
iommu->cmd_regs = iommu->xlate_regs + IOC_IOCmd_Offset;
|
|
|
|
/* ensure that the STEs have updated */
|
|
mb();
|
|
|
|
/* setup interrupts for the iommu. */
|
|
reg = in_be64(iommu->xlate_regs + IOC_IO_ExcpStat);
|
|
out_be64(iommu->xlate_regs + IOC_IO_ExcpStat,
|
|
reg & ~IOC_IO_ExcpStat_V);
|
|
out_be64(iommu->xlate_regs + IOC_IO_ExcpMask,
|
|
IOC_IO_ExcpMask_PFE | IOC_IO_ExcpMask_SFE);
|
|
|
|
virq = irq_create_mapping(NULL,
|
|
IIC_IRQ_IOEX_ATI | (iommu->nid << IIC_IRQ_NODE_SHIFT));
|
|
BUG_ON(virq == NO_IRQ);
|
|
|
|
ret = request_irq(virq, ioc_interrupt, 0, iommu->name, iommu);
|
|
BUG_ON(ret);
|
|
|
|
/* set the IOC segment table origin register (and turn on the iommu) */
|
|
reg = IOC_IOST_Origin_E | __pa(iommu->stab) | IOC_IOST_Origin_HW;
|
|
out_be64(iommu->xlate_regs + IOC_IOST_Origin, reg);
|
|
in_be64(iommu->xlate_regs + IOC_IOST_Origin);
|
|
|
|
/* turn on IO translation */
|
|
reg = in_be64(iommu->cmd_regs + IOC_IOCmd_Cfg) | IOC_IOCmd_Cfg_TE;
|
|
out_be64(iommu->cmd_regs + IOC_IOCmd_Cfg, reg);
|
|
}
|
|
|
|
static void cell_iommu_setup_hardware(struct cbe_iommu *iommu,
|
|
unsigned long base, unsigned long size)
|
|
{
|
|
cell_iommu_setup_stab(iommu, base, size, 0, 0);
|
|
iommu->ptab = cell_iommu_alloc_ptab(iommu, base, size, 0, 0,
|
|
IOMMU_PAGE_SHIFT_4K);
|
|
cell_iommu_enable_hardware(iommu);
|
|
}
|
|
|
|
#if 0/* Unused for now */
|
|
static struct iommu_window *find_window(struct cbe_iommu *iommu,
|
|
unsigned long offset, unsigned long size)
|
|
{
|
|
struct iommu_window *window;
|
|
|
|
/* todo: check for overlapping (but not equal) windows) */
|
|
|
|
list_for_each_entry(window, &(iommu->windows), list) {
|
|
if (window->offset == offset && window->size == size)
|
|
return window;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
#endif
|
|
|
|
static inline u32 cell_iommu_get_ioid(struct device_node *np)
|
|
{
|
|
const u32 *ioid;
|
|
|
|
ioid = of_get_property(np, "ioid", NULL);
|
|
if (ioid == NULL) {
|
|
printk(KERN_WARNING "iommu: missing ioid for %s using 0\n",
|
|
np->full_name);
|
|
return 0;
|
|
}
|
|
|
|
return *ioid;
|
|
}
|
|
|
|
static struct iommu_table_ops cell_iommu_ops = {
|
|
.set = tce_build_cell,
|
|
.clear = tce_free_cell
|
|
};
|
|
|
|
static struct iommu_window * __init
|
|
cell_iommu_setup_window(struct cbe_iommu *iommu, struct device_node *np,
|
|
unsigned long offset, unsigned long size,
|
|
unsigned long pte_offset)
|
|
{
|
|
struct iommu_window *window;
|
|
struct page *page;
|
|
u32 ioid;
|
|
|
|
ioid = cell_iommu_get_ioid(np);
|
|
|
|
window = kzalloc_node(sizeof(*window), GFP_KERNEL, iommu->nid);
|
|
BUG_ON(window == NULL);
|
|
|
|
window->offset = offset;
|
|
window->size = size;
|
|
window->ioid = ioid;
|
|
window->iommu = iommu;
|
|
|
|
window->table.it_blocksize = 16;
|
|
window->table.it_base = (unsigned long)iommu->ptab;
|
|
window->table.it_index = iommu->nid;
|
|
window->table.it_page_shift = IOMMU_PAGE_SHIFT_4K;
|
|
window->table.it_offset =
|
|
(offset >> window->table.it_page_shift) + pte_offset;
|
|
window->table.it_size = size >> window->table.it_page_shift;
|
|
window->table.it_ops = &cell_iommu_ops;
|
|
|
|
iommu_init_table(&window->table, iommu->nid);
|
|
|
|
pr_debug("\tioid %d\n", window->ioid);
|
|
pr_debug("\tblocksize %ld\n", window->table.it_blocksize);
|
|
pr_debug("\tbase 0x%016lx\n", window->table.it_base);
|
|
pr_debug("\toffset 0x%lx\n", window->table.it_offset);
|
|
pr_debug("\tsize %ld\n", window->table.it_size);
|
|
|
|
list_add(&window->list, &iommu->windows);
|
|
|
|
if (offset != 0)
|
|
return window;
|
|
|
|
/* We need to map and reserve the first IOMMU page since it's used
|
|
* by the spider workaround. In theory, we only need to do that when
|
|
* running on spider but it doesn't really matter.
|
|
*
|
|
* This code also assumes that we have a window that starts at 0,
|
|
* which is the case on all spider based blades.
|
|
*/
|
|
page = alloc_pages_node(iommu->nid, GFP_KERNEL, 0);
|
|
BUG_ON(!page);
|
|
iommu->pad_page = page_address(page);
|
|
clear_page(iommu->pad_page);
|
|
|
|
__set_bit(0, window->table.it_map);
|
|
tce_build_cell(&window->table, window->table.it_offset, 1,
|
|
(unsigned long)iommu->pad_page, DMA_TO_DEVICE, NULL);
|
|
|
|
return window;
|
|
}
|
|
|
|
static struct cbe_iommu *cell_iommu_for_node(int nid)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < cbe_nr_iommus; i++)
|
|
if (iommus[i].nid == nid)
|
|
return &iommus[i];
|
|
return NULL;
|
|
}
|
|
|
|
static unsigned long cell_dma_direct_offset;
|
|
|
|
static unsigned long dma_iommu_fixed_base;
|
|
|
|
/* iommu_fixed_is_weak is set if booted with iommu_fixed=weak */
|
|
static int iommu_fixed_is_weak;
|
|
|
|
static struct iommu_table *cell_get_iommu_table(struct device *dev)
|
|
{
|
|
struct iommu_window *window;
|
|
struct cbe_iommu *iommu;
|
|
|
|
/* Current implementation uses the first window available in that
|
|
* node's iommu. We -might- do something smarter later though it may
|
|
* never be necessary
|
|
*/
|
|
iommu = cell_iommu_for_node(dev_to_node(dev));
|
|
if (iommu == NULL || list_empty(&iommu->windows)) {
|
|
dev_err(dev, "iommu: missing iommu for %s (node %d)\n",
|
|
of_node_full_name(dev->of_node), dev_to_node(dev));
|
|
return NULL;
|
|
}
|
|
window = list_entry(iommu->windows.next, struct iommu_window, list);
|
|
|
|
return &window->table;
|
|
}
|
|
|
|
/* A coherent allocation implies strong ordering */
|
|
|
|
static void *dma_fixed_alloc_coherent(struct device *dev, size_t size,
|
|
dma_addr_t *dma_handle, gfp_t flag,
|
|
struct dma_attrs *attrs)
|
|
{
|
|
if (iommu_fixed_is_weak)
|
|
return iommu_alloc_coherent(dev, cell_get_iommu_table(dev),
|
|
size, dma_handle,
|
|
device_to_mask(dev), flag,
|
|
dev_to_node(dev));
|
|
else
|
|
return dma_direct_ops.alloc(dev, size, dma_handle, flag,
|
|
attrs);
|
|
}
|
|
|
|
static void dma_fixed_free_coherent(struct device *dev, size_t size,
|
|
void *vaddr, dma_addr_t dma_handle,
|
|
struct dma_attrs *attrs)
|
|
{
|
|
if (iommu_fixed_is_weak)
|
|
iommu_free_coherent(cell_get_iommu_table(dev), size, vaddr,
|
|
dma_handle);
|
|
else
|
|
dma_direct_ops.free(dev, size, vaddr, dma_handle, attrs);
|
|
}
|
|
|
|
static dma_addr_t dma_fixed_map_page(struct device *dev, struct page *page,
|
|
unsigned long offset, size_t size,
|
|
enum dma_data_direction direction,
|
|
struct dma_attrs *attrs)
|
|
{
|
|
if (iommu_fixed_is_weak == dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs))
|
|
return dma_direct_ops.map_page(dev, page, offset, size,
|
|
direction, attrs);
|
|
else
|
|
return iommu_map_page(dev, cell_get_iommu_table(dev), page,
|
|
offset, size, device_to_mask(dev),
|
|
direction, attrs);
|
|
}
|
|
|
|
static void dma_fixed_unmap_page(struct device *dev, dma_addr_t dma_addr,
|
|
size_t size, enum dma_data_direction direction,
|
|
struct dma_attrs *attrs)
|
|
{
|
|
if (iommu_fixed_is_weak == dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs))
|
|
dma_direct_ops.unmap_page(dev, dma_addr, size, direction,
|
|
attrs);
|
|
else
|
|
iommu_unmap_page(cell_get_iommu_table(dev), dma_addr, size,
|
|
direction, attrs);
|
|
}
|
|
|
|
static int dma_fixed_map_sg(struct device *dev, struct scatterlist *sg,
|
|
int nents, enum dma_data_direction direction,
|
|
struct dma_attrs *attrs)
|
|
{
|
|
if (iommu_fixed_is_weak == dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs))
|
|
return dma_direct_ops.map_sg(dev, sg, nents, direction, attrs);
|
|
else
|
|
return ppc_iommu_map_sg(dev, cell_get_iommu_table(dev), sg,
|
|
nents, device_to_mask(dev),
|
|
direction, attrs);
|
|
}
|
|
|
|
static void dma_fixed_unmap_sg(struct device *dev, struct scatterlist *sg,
|
|
int nents, enum dma_data_direction direction,
|
|
struct dma_attrs *attrs)
|
|
{
|
|
if (iommu_fixed_is_weak == dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs))
|
|
dma_direct_ops.unmap_sg(dev, sg, nents, direction, attrs);
|
|
else
|
|
ppc_iommu_unmap_sg(cell_get_iommu_table(dev), sg, nents,
|
|
direction, attrs);
|
|
}
|
|
|
|
static int dma_fixed_dma_supported(struct device *dev, u64 mask)
|
|
{
|
|
return mask == DMA_BIT_MASK(64);
|
|
}
|
|
|
|
static int dma_set_mask_and_switch(struct device *dev, u64 dma_mask);
|
|
|
|
struct dma_map_ops dma_iommu_fixed_ops = {
|
|
.alloc = dma_fixed_alloc_coherent,
|
|
.free = dma_fixed_free_coherent,
|
|
.map_sg = dma_fixed_map_sg,
|
|
.unmap_sg = dma_fixed_unmap_sg,
|
|
.dma_supported = dma_fixed_dma_supported,
|
|
.set_dma_mask = dma_set_mask_and_switch,
|
|
.map_page = dma_fixed_map_page,
|
|
.unmap_page = dma_fixed_unmap_page,
|
|
};
|
|
|
|
static void cell_dma_dev_setup_fixed(struct device *dev);
|
|
|
|
static void cell_dma_dev_setup(struct device *dev)
|
|
{
|
|
/* Order is important here, these are not mutually exclusive */
|
|
if (get_dma_ops(dev) == &dma_iommu_fixed_ops)
|
|
cell_dma_dev_setup_fixed(dev);
|
|
else if (get_pci_dma_ops() == &dma_iommu_ops)
|
|
set_iommu_table_base(dev, cell_get_iommu_table(dev));
|
|
else if (get_pci_dma_ops() == &dma_direct_ops)
|
|
set_dma_offset(dev, cell_dma_direct_offset);
|
|
else
|
|
BUG();
|
|
}
|
|
|
|
static void cell_pci_dma_dev_setup(struct pci_dev *dev)
|
|
{
|
|
cell_dma_dev_setup(&dev->dev);
|
|
}
|
|
|
|
static int cell_of_bus_notify(struct notifier_block *nb, unsigned long action,
|
|
void *data)
|
|
{
|
|
struct device *dev = data;
|
|
|
|
/* We are only intereted in device addition */
|
|
if (action != BUS_NOTIFY_ADD_DEVICE)
|
|
return 0;
|
|
|
|
/* We use the PCI DMA ops */
|
|
dev->archdata.dma_ops = get_pci_dma_ops();
|
|
|
|
cell_dma_dev_setup(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct notifier_block cell_of_bus_notifier = {
|
|
.notifier_call = cell_of_bus_notify
|
|
};
|
|
|
|
static int __init cell_iommu_get_window(struct device_node *np,
|
|
unsigned long *base,
|
|
unsigned long *size)
|
|
{
|
|
const __be32 *dma_window;
|
|
unsigned long index;
|
|
|
|
/* Use ibm,dma-window if available, else, hard code ! */
|
|
dma_window = of_get_property(np, "ibm,dma-window", NULL);
|
|
if (dma_window == NULL) {
|
|
*base = 0;
|
|
*size = 0x80000000u;
|
|
return -ENODEV;
|
|
}
|
|
|
|
of_parse_dma_window(np, dma_window, &index, base, size);
|
|
return 0;
|
|
}
|
|
|
|
static struct cbe_iommu * __init cell_iommu_alloc(struct device_node *np)
|
|
{
|
|
struct cbe_iommu *iommu;
|
|
int nid, i;
|
|
|
|
/* Get node ID */
|
|
nid = of_node_to_nid(np);
|
|
if (nid < 0) {
|
|
printk(KERN_ERR "iommu: failed to get node for %s\n",
|
|
np->full_name);
|
|
return NULL;
|
|
}
|
|
pr_debug("iommu: setting up iommu for node %d (%s)\n",
|
|
nid, np->full_name);
|
|
|
|
/* XXX todo: If we can have multiple windows on the same IOMMU, which
|
|
* isn't the case today, we probably want here to check whether the
|
|
* iommu for that node is already setup.
|
|
* However, there might be issue with getting the size right so let's
|
|
* ignore that for now. We might want to completely get rid of the
|
|
* multiple window support since the cell iommu supports per-page ioids
|
|
*/
|
|
|
|
if (cbe_nr_iommus >= NR_IOMMUS) {
|
|
printk(KERN_ERR "iommu: too many IOMMUs detected ! (%s)\n",
|
|
np->full_name);
|
|
return NULL;
|
|
}
|
|
|
|
/* Init base fields */
|
|
i = cbe_nr_iommus++;
|
|
iommu = &iommus[i];
|
|
iommu->stab = NULL;
|
|
iommu->nid = nid;
|
|
snprintf(iommu->name, sizeof(iommu->name), "iommu%d", i);
|
|
INIT_LIST_HEAD(&iommu->windows);
|
|
|
|
return iommu;
|
|
}
|
|
|
|
static void __init cell_iommu_init_one(struct device_node *np,
|
|
unsigned long offset)
|
|
{
|
|
struct cbe_iommu *iommu;
|
|
unsigned long base, size;
|
|
|
|
iommu = cell_iommu_alloc(np);
|
|
if (!iommu)
|
|
return;
|
|
|
|
/* Obtain a window for it */
|
|
cell_iommu_get_window(np, &base, &size);
|
|
|
|
pr_debug("\ttranslating window 0x%lx...0x%lx\n",
|
|
base, base + size - 1);
|
|
|
|
/* Initialize the hardware */
|
|
cell_iommu_setup_hardware(iommu, base, size);
|
|
|
|
/* Setup the iommu_table */
|
|
cell_iommu_setup_window(iommu, np, base, size,
|
|
offset >> IOMMU_PAGE_SHIFT_4K);
|
|
}
|
|
|
|
static void __init cell_disable_iommus(void)
|
|
{
|
|
int node;
|
|
unsigned long base, val;
|
|
void __iomem *xregs, *cregs;
|
|
|
|
/* Make sure IOC translation is disabled on all nodes */
|
|
for_each_online_node(node) {
|
|
if (cell_iommu_find_ioc(node, &base))
|
|
continue;
|
|
xregs = ioremap(base, IOC_Reg_Size);
|
|
if (xregs == NULL)
|
|
continue;
|
|
cregs = xregs + IOC_IOCmd_Offset;
|
|
|
|
pr_debug("iommu: cleaning up iommu on node %d\n", node);
|
|
|
|
out_be64(xregs + IOC_IOST_Origin, 0);
|
|
(void)in_be64(xregs + IOC_IOST_Origin);
|
|
val = in_be64(cregs + IOC_IOCmd_Cfg);
|
|
val &= ~IOC_IOCmd_Cfg_TE;
|
|
out_be64(cregs + IOC_IOCmd_Cfg, val);
|
|
(void)in_be64(cregs + IOC_IOCmd_Cfg);
|
|
|
|
iounmap(xregs);
|
|
}
|
|
}
|
|
|
|
static int __init cell_iommu_init_disabled(void)
|
|
{
|
|
struct device_node *np = NULL;
|
|
unsigned long base = 0, size;
|
|
|
|
/* When no iommu is present, we use direct DMA ops */
|
|
set_pci_dma_ops(&dma_direct_ops);
|
|
|
|
/* First make sure all IOC translation is turned off */
|
|
cell_disable_iommus();
|
|
|
|
/* If we have no Axon, we set up the spider DMA magic offset */
|
|
if (of_find_node_by_name(NULL, "axon") == NULL)
|
|
cell_dma_direct_offset = SPIDER_DMA_OFFSET;
|
|
|
|
/* Now we need to check to see where the memory is mapped
|
|
* in PCI space. We assume that all busses use the same dma
|
|
* window which is always the case so far on Cell, thus we
|
|
* pick up the first pci-internal node we can find and check
|
|
* the DMA window from there.
|
|
*/
|
|
for_each_node_by_name(np, "axon") {
|
|
if (np->parent == NULL || np->parent->parent != NULL)
|
|
continue;
|
|
if (cell_iommu_get_window(np, &base, &size) == 0)
|
|
break;
|
|
}
|
|
if (np == NULL) {
|
|
for_each_node_by_name(np, "pci-internal") {
|
|
if (np->parent == NULL || np->parent->parent != NULL)
|
|
continue;
|
|
if (cell_iommu_get_window(np, &base, &size) == 0)
|
|
break;
|
|
}
|
|
}
|
|
of_node_put(np);
|
|
|
|
/* If we found a DMA window, we check if it's big enough to enclose
|
|
* all of physical memory. If not, we force enable IOMMU
|
|
*/
|
|
if (np && size < memblock_end_of_DRAM()) {
|
|
printk(KERN_WARNING "iommu: force-enabled, dma window"
|
|
" (%ldMB) smaller than total memory (%lldMB)\n",
|
|
size >> 20, memblock_end_of_DRAM() >> 20);
|
|
return -ENODEV;
|
|
}
|
|
|
|
cell_dma_direct_offset += base;
|
|
|
|
if (cell_dma_direct_offset != 0)
|
|
cell_pci_controller_ops.dma_dev_setup = cell_pci_dma_dev_setup;
|
|
|
|
printk("iommu: disabled, direct DMA offset is 0x%lx\n",
|
|
cell_dma_direct_offset);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Fixed IOMMU mapping support
|
|
*
|
|
* This code adds support for setting up a fixed IOMMU mapping on certain
|
|
* cell machines. For 64-bit devices this avoids the performance overhead of
|
|
* mapping and unmapping pages at runtime. 32-bit devices are unable to use
|
|
* the fixed mapping.
|
|
*
|
|
* The fixed mapping is established at boot, and maps all of physical memory
|
|
* 1:1 into device space at some offset. On machines with < 30 GB of memory
|
|
* we setup the fixed mapping immediately above the normal IOMMU window.
|
|
*
|
|
* For example a machine with 4GB of memory would end up with the normal
|
|
* IOMMU window from 0-2GB and the fixed mapping window from 2GB to 6GB. In
|
|
* this case a 64-bit device wishing to DMA to 1GB would be told to DMA to
|
|
* 3GB, plus any offset required by firmware. The firmware offset is encoded
|
|
* in the "dma-ranges" property.
|
|
*
|
|
* On machines with 30GB or more of memory, we are unable to place the fixed
|
|
* mapping above the normal IOMMU window as we would run out of address space.
|
|
* Instead we move the normal IOMMU window to coincide with the hash page
|
|
* table, this region does not need to be part of the fixed mapping as no
|
|
* device should ever be DMA'ing to it. We then setup the fixed mapping
|
|
* from 0 to 32GB.
|
|
*/
|
|
|
|
static u64 cell_iommu_get_fixed_address(struct device *dev)
|
|
{
|
|
u64 cpu_addr, size, best_size, dev_addr = OF_BAD_ADDR;
|
|
struct device_node *np;
|
|
const u32 *ranges = NULL;
|
|
int i, len, best, naddr, nsize, pna, range_size;
|
|
|
|
np = of_node_get(dev->of_node);
|
|
while (1) {
|
|
naddr = of_n_addr_cells(np);
|
|
nsize = of_n_size_cells(np);
|
|
np = of_get_next_parent(np);
|
|
if (!np)
|
|
break;
|
|
|
|
ranges = of_get_property(np, "dma-ranges", &len);
|
|
|
|
/* Ignore empty ranges, they imply no translation required */
|
|
if (ranges && len > 0)
|
|
break;
|
|
}
|
|
|
|
if (!ranges) {
|
|
dev_dbg(dev, "iommu: no dma-ranges found\n");
|
|
goto out;
|
|
}
|
|
|
|
len /= sizeof(u32);
|
|
|
|
pna = of_n_addr_cells(np);
|
|
range_size = naddr + nsize + pna;
|
|
|
|
/* dma-ranges format:
|
|
* child addr : naddr cells
|
|
* parent addr : pna cells
|
|
* size : nsize cells
|
|
*/
|
|
for (i = 0, best = -1, best_size = 0; i < len; i += range_size) {
|
|
cpu_addr = of_translate_dma_address(np, ranges + i + naddr);
|
|
size = of_read_number(ranges + i + naddr + pna, nsize);
|
|
|
|
if (cpu_addr == 0 && size > best_size) {
|
|
best = i;
|
|
best_size = size;
|
|
}
|
|
}
|
|
|
|
if (best >= 0) {
|
|
dev_addr = of_read_number(ranges + best, naddr);
|
|
} else
|
|
dev_dbg(dev, "iommu: no suitable range found!\n");
|
|
|
|
out:
|
|
of_node_put(np);
|
|
|
|
return dev_addr;
|
|
}
|
|
|
|
static int dma_set_mask_and_switch(struct device *dev, u64 dma_mask)
|
|
{
|
|
if (!dev->dma_mask || !dma_supported(dev, dma_mask))
|
|
return -EIO;
|
|
|
|
if (dma_mask == DMA_BIT_MASK(64) &&
|
|
cell_iommu_get_fixed_address(dev) != OF_BAD_ADDR)
|
|
{
|
|
dev_dbg(dev, "iommu: 64-bit OK, using fixed ops\n");
|
|
set_dma_ops(dev, &dma_iommu_fixed_ops);
|
|
} else {
|
|
dev_dbg(dev, "iommu: not 64-bit, using default ops\n");
|
|
set_dma_ops(dev, get_pci_dma_ops());
|
|
}
|
|
|
|
cell_dma_dev_setup(dev);
|
|
|
|
*dev->dma_mask = dma_mask;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void cell_dma_dev_setup_fixed(struct device *dev)
|
|
{
|
|
u64 addr;
|
|
|
|
addr = cell_iommu_get_fixed_address(dev) + dma_iommu_fixed_base;
|
|
set_dma_offset(dev, addr);
|
|
|
|
dev_dbg(dev, "iommu: fixed addr = %llx\n", addr);
|
|
}
|
|
|
|
static void insert_16M_pte(unsigned long addr, unsigned long *ptab,
|
|
unsigned long base_pte)
|
|
{
|
|
unsigned long segment, offset;
|
|
|
|
segment = addr >> IO_SEGMENT_SHIFT;
|
|
offset = (addr >> 24) - (segment << IO_PAGENO_BITS(24));
|
|
ptab = ptab + (segment * (1 << 12) / sizeof(unsigned long));
|
|
|
|
pr_debug("iommu: addr %lx ptab %p segment %lx offset %lx\n",
|
|
addr, ptab, segment, offset);
|
|
|
|
ptab[offset] = base_pte | (__pa(addr) & CBE_IOPTE_RPN_Mask);
|
|
}
|
|
|
|
static void cell_iommu_setup_fixed_ptab(struct cbe_iommu *iommu,
|
|
struct device_node *np, unsigned long dbase, unsigned long dsize,
|
|
unsigned long fbase, unsigned long fsize)
|
|
{
|
|
unsigned long base_pte, uaddr, ioaddr, *ptab;
|
|
|
|
ptab = cell_iommu_alloc_ptab(iommu, fbase, fsize, dbase, dsize, 24);
|
|
|
|
dma_iommu_fixed_base = fbase;
|
|
|
|
pr_debug("iommu: mapping 0x%lx pages from 0x%lx\n", fsize, fbase);
|
|
|
|
base_pte = CBE_IOPTE_PP_W | CBE_IOPTE_PP_R | CBE_IOPTE_M |
|
|
(cell_iommu_get_ioid(np) & CBE_IOPTE_IOID_Mask);
|
|
|
|
if (iommu_fixed_is_weak)
|
|
pr_info("IOMMU: Using weak ordering for fixed mapping\n");
|
|
else {
|
|
pr_info("IOMMU: Using strong ordering for fixed mapping\n");
|
|
base_pte |= CBE_IOPTE_SO_RW;
|
|
}
|
|
|
|
for (uaddr = 0; uaddr < fsize; uaddr += (1 << 24)) {
|
|
/* Don't touch the dynamic region */
|
|
ioaddr = uaddr + fbase;
|
|
if (ioaddr >= dbase && ioaddr < (dbase + dsize)) {
|
|
pr_debug("iommu: fixed/dynamic overlap, skipping\n");
|
|
continue;
|
|
}
|
|
|
|
insert_16M_pte(uaddr, ptab, base_pte);
|
|
}
|
|
|
|
mb();
|
|
}
|
|
|
|
static int __init cell_iommu_fixed_mapping_init(void)
|
|
{
|
|
unsigned long dbase, dsize, fbase, fsize, hbase, hend;
|
|
struct cbe_iommu *iommu;
|
|
struct device_node *np;
|
|
|
|
/* The fixed mapping is only supported on axon machines */
|
|
np = of_find_node_by_name(NULL, "axon");
|
|
of_node_put(np);
|
|
|
|
if (!np) {
|
|
pr_debug("iommu: fixed mapping disabled, no axons found\n");
|
|
return -1;
|
|
}
|
|
|
|
/* We must have dma-ranges properties for fixed mapping to work */
|
|
np = of_find_node_with_property(NULL, "dma-ranges");
|
|
of_node_put(np);
|
|
|
|
if (!np) {
|
|
pr_debug("iommu: no dma-ranges found, no fixed mapping\n");
|
|
return -1;
|
|
}
|
|
|
|
/* The default setup is to have the fixed mapping sit after the
|
|
* dynamic region, so find the top of the largest IOMMU window
|
|
* on any axon, then add the size of RAM and that's our max value.
|
|
* If that is > 32GB we have to do other shennanigans.
|
|
*/
|
|
fbase = 0;
|
|
for_each_node_by_name(np, "axon") {
|
|
cell_iommu_get_window(np, &dbase, &dsize);
|
|
fbase = max(fbase, dbase + dsize);
|
|
}
|
|
|
|
fbase = _ALIGN_UP(fbase, 1 << IO_SEGMENT_SHIFT);
|
|
fsize = memblock_phys_mem_size();
|
|
|
|
if ((fbase + fsize) <= 0x800000000ul)
|
|
hbase = 0; /* use the device tree window */
|
|
else {
|
|
/* If we're over 32 GB we need to cheat. We can't map all of
|
|
* RAM with the fixed mapping, and also fit the dynamic
|
|
* region. So try to place the dynamic region where the hash
|
|
* table sits, drivers never need to DMA to it, we don't
|
|
* need a fixed mapping for that area.
|
|
*/
|
|
if (!htab_address) {
|
|
pr_debug("iommu: htab is NULL, on LPAR? Huh?\n");
|
|
return -1;
|
|
}
|
|
hbase = __pa(htab_address);
|
|
hend = hbase + htab_size_bytes;
|
|
|
|
/* The window must start and end on a segment boundary */
|
|
if ((hbase != _ALIGN_UP(hbase, 1 << IO_SEGMENT_SHIFT)) ||
|
|
(hend != _ALIGN_UP(hend, 1 << IO_SEGMENT_SHIFT))) {
|
|
pr_debug("iommu: hash window not segment aligned\n");
|
|
return -1;
|
|
}
|
|
|
|
/* Check the hash window fits inside the real DMA window */
|
|
for_each_node_by_name(np, "axon") {
|
|
cell_iommu_get_window(np, &dbase, &dsize);
|
|
|
|
if (hbase < dbase || (hend > (dbase + dsize))) {
|
|
pr_debug("iommu: hash window doesn't fit in"
|
|
"real DMA window\n");
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
fbase = 0;
|
|
}
|
|
|
|
/* Setup the dynamic regions */
|
|
for_each_node_by_name(np, "axon") {
|
|
iommu = cell_iommu_alloc(np);
|
|
BUG_ON(!iommu);
|
|
|
|
if (hbase == 0)
|
|
cell_iommu_get_window(np, &dbase, &dsize);
|
|
else {
|
|
dbase = hbase;
|
|
dsize = htab_size_bytes;
|
|
}
|
|
|
|
printk(KERN_DEBUG "iommu: node %d, dynamic window 0x%lx-0x%lx "
|
|
"fixed window 0x%lx-0x%lx\n", iommu->nid, dbase,
|
|
dbase + dsize, fbase, fbase + fsize);
|
|
|
|
cell_iommu_setup_stab(iommu, dbase, dsize, fbase, fsize);
|
|
iommu->ptab = cell_iommu_alloc_ptab(iommu, dbase, dsize, 0, 0,
|
|
IOMMU_PAGE_SHIFT_4K);
|
|
cell_iommu_setup_fixed_ptab(iommu, np, dbase, dsize,
|
|
fbase, fsize);
|
|
cell_iommu_enable_hardware(iommu);
|
|
cell_iommu_setup_window(iommu, np, dbase, dsize, 0);
|
|
}
|
|
|
|
dma_iommu_ops.set_dma_mask = dma_set_mask_and_switch;
|
|
set_pci_dma_ops(&dma_iommu_ops);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int iommu_fixed_disabled;
|
|
|
|
static int __init setup_iommu_fixed(char *str)
|
|
{
|
|
struct device_node *pciep;
|
|
|
|
if (strcmp(str, "off") == 0)
|
|
iommu_fixed_disabled = 1;
|
|
|
|
/* If we can find a pcie-endpoint in the device tree assume that
|
|
* we're on a triblade or a CAB so by default the fixed mapping
|
|
* should be set to be weakly ordered; but only if the boot
|
|
* option WASN'T set for strong ordering
|
|
*/
|
|
pciep = of_find_node_by_type(NULL, "pcie-endpoint");
|
|
|
|
if (strcmp(str, "weak") == 0 || (pciep && strcmp(str, "strong") != 0))
|
|
iommu_fixed_is_weak = 1;
|
|
|
|
of_node_put(pciep);
|
|
|
|
return 1;
|
|
}
|
|
__setup("iommu_fixed=", setup_iommu_fixed);
|
|
|
|
static u64 cell_dma_get_required_mask(struct device *dev)
|
|
{
|
|
struct dma_map_ops *dma_ops;
|
|
|
|
if (!dev->dma_mask)
|
|
return 0;
|
|
|
|
if (!iommu_fixed_disabled &&
|
|
cell_iommu_get_fixed_address(dev) != OF_BAD_ADDR)
|
|
return DMA_BIT_MASK(64);
|
|
|
|
dma_ops = get_dma_ops(dev);
|
|
if (dma_ops->get_required_mask)
|
|
return dma_ops->get_required_mask(dev);
|
|
|
|
WARN_ONCE(1, "no get_required_mask in %p ops", dma_ops);
|
|
|
|
return DMA_BIT_MASK(64);
|
|
}
|
|
|
|
static int __init cell_iommu_init(void)
|
|
{
|
|
struct device_node *np;
|
|
|
|
/* If IOMMU is disabled or we have little enough RAM to not need
|
|
* to enable it, we setup a direct mapping.
|
|
*
|
|
* Note: should we make sure we have the IOMMU actually disabled ?
|
|
*/
|
|
if (iommu_is_off ||
|
|
(!iommu_force_on && memblock_end_of_DRAM() <= 0x80000000ull))
|
|
if (cell_iommu_init_disabled() == 0)
|
|
goto bail;
|
|
|
|
/* Setup various callbacks */
|
|
cell_pci_controller_ops.dma_dev_setup = cell_pci_dma_dev_setup;
|
|
ppc_md.dma_get_required_mask = cell_dma_get_required_mask;
|
|
|
|
if (!iommu_fixed_disabled && cell_iommu_fixed_mapping_init() == 0)
|
|
goto bail;
|
|
|
|
/* Create an iommu for each /axon node. */
|
|
for_each_node_by_name(np, "axon") {
|
|
if (np->parent == NULL || np->parent->parent != NULL)
|
|
continue;
|
|
cell_iommu_init_one(np, 0);
|
|
}
|
|
|
|
/* Create an iommu for each toplevel /pci-internal node for
|
|
* old hardware/firmware
|
|
*/
|
|
for_each_node_by_name(np, "pci-internal") {
|
|
if (np->parent == NULL || np->parent->parent != NULL)
|
|
continue;
|
|
cell_iommu_init_one(np, SPIDER_DMA_OFFSET);
|
|
}
|
|
|
|
/* Setup default PCI iommu ops */
|
|
set_pci_dma_ops(&dma_iommu_ops);
|
|
|
|
bail:
|
|
/* Register callbacks on OF platform device addition/removal
|
|
* to handle linking them to the right DMA operations
|
|
*/
|
|
bus_register_notifier(&platform_bus_type, &cell_of_bus_notifier);
|
|
|
|
return 0;
|
|
}
|
|
machine_arch_initcall(cell, cell_iommu_init);
|